U-Boot SPL 2012.10 (Oct 21 2012 - 02:25:07) OMAP4460 ES1.1 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2012.10 (Oct 21 2012 - 02:25:07) CPU : OMAP4460 ES1.1 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 3  2  1  0 SD/MMC found on device 0 reading uEnv.txt 281 bytes read Loaded environment from uEnv.txt Importing environment from mmc ... reading uInitrd 12661984 bytes read reading uImage 3778856 bytes read ## Booting kernel from Legacy Image at 80300000 ... Image Name: 3.6.10-8.fc18.armv7hl.omap Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3778792 Bytes = 3.6 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 12661920 Bytes = 12.1 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.10-8.fc18.armv7hl.omap (mockbuild@) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 SMP Tue Jan 29 14:45:38 EST 2013 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Panda board [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] OMAP4460 ES1.1 [ 0.000000] PERCPU: Embedded 9 pages/cpu @c108f000 s13568 r8192 d15104 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258304 [ 0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=UUID=8363be44-67e2-4c98-b1cd-2a1f5632f578 ro rootwait omapdss.def_disp=dvi [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 2097152 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 753MB 264MB = 1017MB total [ 0.000000] Memory: 1009172k/1009172k available, 39404k reserved, 270336K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc06ab10c (6797 kB) [ 0.000000] .init : 0xc06ac000 - 0xc0717500 ( 430 kB) [ 0.000000] .data : 0xc0718000 - 0xc07a49d8 ( 563 kB) [ 0.000000] .bss : 0xc07a49fc - 0xc0886120 ( 902 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:460 [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] omap_hwmod: sys_32k_ck: missing clockdomain for sys_32k_ck. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000183] Calibrating delay loop... 1392.74 BogoMIPS (lpj=5439488) [ 0.070251] pid_max: default: 32768 minimum: 301 [ 0.070556] Security Framework initialized [ 0.070587] SELinux: Initializing. [ 0.070983] Mount-cache hash table entries: 512 [ 0.072570] Initializing cgroup subsys cpuacct [ 0.072601] Initializing cgroup subsys memory [ 0.072631] Initializing cgroup subsys devices [ 0.072662] Initializing cgroup subsys freezer [ 0.072662] Initializing cgroup subsys net_cls [ 0.072692] Initializing cgroup subsys blkio [ 0.072692] Initializing cgroup subsys perf_event [ 0.072875] CPU: Testing write buffer coherency: ok [ 0.072937] ftrace: allocating 20030 entries in 40 pages [ 0.109558] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.109771] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.109893] Setting up static identity map for 0x804c66c8 - 0x804c6720 [ 0.109924] L310 cache controller enabled [ 0.109954] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1048576 B [ 0.113159] CPU1: Booted secondary processor [ 0.180114] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.180145] CPU1: Unknown IPI message 0x0 [ 0.180328] Brought up 2 CPUs [ 0.180328] SMP: Total of 2 processors activated (2792.83 BogoMIPS). [ 0.181549] devtmpfs: initialized [ 0.185668] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck. [ 0.190673] omap_hwmod: mcpdm: cannot be enabled for reset (3) [ 0.190795] omap_hwmod: cm_core_aon: cannot be enabled for reset (3) [ 0.190795] omap_hwmod: cm_core: cannot be enabled for reset (3) [ 0.192352] atomic64 test passed [ 0.192718] dummy: [ 0.193084] NET: Registered protocol family 16 [ 0.194427] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.194580] GPMC revision 6.0 [ 0.194580] gpmc: irq-52 could not claim: err -22 [ 0.196044] OMAP GPIO hardware version 0.1 [ 0.197784] omap_mux_init: Add partition: #1: core, flags: 2 [ 0.198913] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 0.200042] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx [ 0.200042] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx [ 0.214630] usbhs_omap: alias fck already exists [ 0.216125] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.216125] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.216705] omap_init_sham: platform not supported [ 0.216705] omap_init_aes: platform not supported [ 0.219421] OMAP DMA hardware revision 0.0 [ 0.224914] bio: create slab at 0 [ 0.236877] omap-dma-engine omap-dma-engine: OMAP DMA engine driver [ 0.237060] vwl1271: 1800 mV [ 0.237670] SCSI subsystem initialized [ 0.238128] usbcore: registered new interface driver usbfs [ 0.238189] usbcore: registered new interface driver hub [ 0.238311] usbcore: registered new device driver usb [ 0.250549] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz [ 0.250946] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 0.251434] twl 1-0048: PIH (irq 39) chaining IRQs 352..372 [ 0.251831] VUSB: 3300 mV normal standby [ 0.454742] twl6030_usb twl6030_usb: Initialized TWL6030 USB module [ 0.454986] vdd_mpu: 500 <--> 1500 mV normal [ 0.455230] vdd_iva: 500 <--> 1500 mV normal [ 0.455474] vdd_core: 500 <--> 1500 mV normal [ 0.455963] V1V8: 1800 mV normal standby [ 0.456237] V2V1: 2100 mV normal standby [ 0.456604] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby [ 0.457153] VPP: 1800 <--> 2500 mV at 1900 mV normal standby [ 0.457763] VCXIO: 1800 mV normal standby [ 0.457794] VCXIO: supplied by V2V1 [ 0.458587] VDAC: 1800 mV normal standby [ 0.458618] VDAC: supplied by V2V1 [ 0.459320] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby [ 0.459869] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby [ 0.460357] VANA: 2100 mV normal standby [ 0.469207] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz [ 0.484832] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz [ 0.500457] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz [ 0.501190] omap-iommu omap-iommu.0: ducati registered [ 0.501281] omap-iommu omap-iommu.1: tesla registered [ 0.501831] NetLabel: Initializing [ 0.501831] NetLabel: domain hash size = 128 [ 0.501831] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.501892] NetLabel: unlabeled traffic allowed by default [ 0.502075] Switching to clocksource 32k_counter [ 0.525787] usbhs_omap usbhs_omap: ehci_logic_fck failed:-2 [ 0.526580] NET: Registered protocol family 2 [ 0.527404] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.529510] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.530731] TCP: Hash tables configured (established 131072 bind 65536) [ 0.530792] TCP: reno registered [ 0.530822] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.530853] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.531280] NET: Registered protocol family 1 [ 0.531524] Unpacking initramfs... [ 1.654724] Freeing initrd memory: 12364K [ 1.655334] omap_dsp_init: 600000 bytes @ af200000 [ 1.656982] audit: initializing netlink socket (disabled) [ 1.657012] type=2000 audit(1.640:1): initialized [ 1.783752] bounce pool size: 64 pages [ 1.790435] VFS: Disk quotas dquot_6.5.2 [ 1.790802] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.793273] msgmni has been set to 1467 [ 1.795501] alg: No test for stdrng (krng) [ 1.795532] NET: Registered protocol family 38 [ 1.795776] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.795928] io scheduler noop registered [ 1.795928] io scheduler deadline registered [ 1.795989] io scheduler cfq registered (default) [ 1.796508] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.797698] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 1.798065] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 1.798370] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 2.638977] console [ttyO2] enabled [ 2.643066] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 2.655975] loop: module loaded [ 2.662139] libphy: Fixed MDIO Bus: probed [ 2.666717] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.673736] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 2.679901] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 2.713104] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00 [ 2.728698] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 2.734832] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.741973] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.749572] usb usb1: Product: OMAP-EHCI Host Controller [ 2.755157] usb usb1: Manufacturer: Linux 3.6.10-8.fc18.armv7hl.omap ehci_hcd [ 2.762664] usb usb1: SerialNumber: ehci-omap.0 [ 2.767944] hub 1-0:1.0: USB hub found [ 2.771881] hub 1-0:1.0: 3 ports detected [ 2.776336] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.782897] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller [ 2.789337] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2 [ 2.797363] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800 [ 2.881683] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.888854] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.896453] usb usb2: Product: OMAP3 OHCI Host Controller [ 2.902130] usb usb2: Manufacturer: Linux 3.6.10-8.fc18.armv7hl.omap ohci_hcd [ 2.909606] usb usb2: SerialNumber: ohci-omap3.0 [ 2.914947] hub 2-0:1.0: USB hub found [ 2.918914] hub 2-0:1.0: 3 ports detected [ 2.923431] usbcore: registered new interface driver usbserial [ 2.929626] usbcore: registered new interface driver usbserial_generic [ 2.936523] USB Serial support registered for generic [ 2.941833] usbserial: USB Serial Driver core [ 2.946624] mousedev: PS/2 mouse device common for all mice [ 2.953094] twl_rtc twl_rtc: Power up reset detected. [ 2.959075] twl_rtc twl_rtc: Enabling TWL-RTC [ 2.966400] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 2.973663] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.981567] device-mapper: uevent: version 1.0.3 [ 2.986816] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com [ 2.996032] platform mpu.0: opp_init_cpufreq_table: Device OPP not found (-19) [ 3.003631] platform mpu.0: omap_cpu_init: cpu0: failed creating freq table[-19] [ 3.011444] platform mpu.0: opp_init_cpufreq_table: Device OPP not found (-19) [ 3.019042] platform mpu.0: omap_cpu_init: cpu1: failed creating freq table[-19] [ 3.026885] cpuidle: using governor ladder [ 3.031158] cpuidle: using governor menu [ 3.035339] sdhci: Secure Digital Host Controller Interface driver [ 3.041839] sdhci: Copyright(c) Pierre Ossman [ 3.046661] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk [ 3.052947] omap-dma-engine omap-dma-engine: allocating channel for 62 [ 3.059814] omap-dma-engine omap-dma-engine: allocating channel for 61 [ 3.103729] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 3.119476] omap_hsmmc omap_hsmmc.4: Failed to get debounce clk [ 3.125732] omap-dma-engine omap-dma-engine: allocating channel for 60 [ 3.132598] omap-dma-engine omap-dma-engine: allocating channel for 59 [ 3.252227] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.258911] usbcore: registered new interface driver usbhid [ 3.264801] usbhid: USB HID core driver [ 3.269073] drop_monitor: Initializing network drop monitor service [ 3.275665] mmc1: card claims to support voltages below the defined range. These will be ignored. [ 3.276092] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.276153] TCP: cubic registered [ 3.276184] Initializing XFRM netlink socket [ 3.276885] NET: Registered protocol family 10 [ 3.277770] mip6: Mobile IPv6 [ 3.277770] NET: Registered protocol family 17 [ 3.310913] VFP support v0.3: [ 3.310943] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 3.310974] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 implementor 41 architecture 3 part 30 variant 9 rev 4 [ 3.328613] hub 1-1:1.0: USB hub found [ 3.337493] hub 1-1:1.0: 5 ports detected [ 3.339508] omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0). [ 3.339508] omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0). [ 3.339508] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu [ 3.339508] omap2_set_init_voltage: unable to set vdd_mpu [ 3.339538] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 3.339538] omap2_set_init_voltage: unable to set vdd_core [ 3.339538] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva [ 3.339538] omap2_set_init_voltage: unable to set vdd_iva [ 3.339538] Power Management for TI OMAP4. [ 3.401763] ThumbEE CPU extension supported. [ 3.406311] Registering SWP/SWPB emulation handler [ 3.418212] clock: disabling unused clocks to save power [ 3.424621] registered taskstats version 1 [ 3.429443] VANA: incomplete constraints, leaving on [ 3.435394] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.435852] VDAC: incomplete constraints, leaving on [ 3.436492] VUSB: incomplete constraints, leaving on [ 3.452636] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.461883] mmc1: new SDIO card at address 0001 [ 3.462341] Freeing init memory: 428K [ 3.697570] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 3.704742] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.715179] mmc0: new high speed SDHC card at address b368 [ 3.721649] mmcblk0: mmc0:b368 SD 15.4 GiB [ 3.728607] mmcblk0: p1 p2 p3 [ 3.816040] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 3.823272] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.908843] systemd[1]: systemd 195 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; fedora) [ 3.916320] usb 1-1.2: new low-speed USB device number 4 using ehci-omap [ 3.929901] systemd[1]: Running in initial RAM disk. Welcome to Fedora 18 (Spherical Cow) dracut-024-18.git20130102.fc18 (Initramfs)! [ 3.955932] systemd[1]: No hostname configured. [ 3.960723] systemd[1]: Set hostname to . [ 3.966308] systemd[1]: Initializing machine ID from random generator. [ 4.039428] usb 1-1.2: New USB device found, idVendor=045e, idProduct=00d2 [ 4.046691] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.054382] usb 1-1.2: Product: Microsoft Notebook Optical Mouse with Tilt Wheel [ 4.062194] usb 1-1.2: Manufacturer: Microsoft [ 4.073974] input: Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input0 [ 4.089630] hid-generic 0003:045E:00D2.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel] on usb-ehci-omap.0-1.2/input0 [ 4.112854] systemd[1]: Starting Encrypted Volumes. [ OK ] Reached target Encrypted Volumes. [ 4.135284] systemd[1]: Reached target Encrypted Volumes. [ 4.141357] systemd[1]: Starting udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.166564] systemd[1]: Listening on udev Kernel Socket. [ 4.172454] systemd[1]: Starting udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.189941] usb 1-1.3: new high-speed USB device number 5 using ehci-omap [ 4.197570] systemd[1]: Listening on udev Control Socket. [ 4.203308] systemd[1]: Starting Journal Socket. [ OK ] Listening on Journal Socket. [ 4.221221] systemd[1]: Listening on Journal Socket. [ 4.226531] systemd[1]: Starting dracut cmdline hook... Starting dracut cmdline hook... [ 4.300872] systemd[1]: Started Load Kernel Modules. [ 4.306182] systemd[1]: Starting Journal Service... Starting Journal Service... [ 4.316101] usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1006 [ 4.323364] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.331085] usb 1-1.3: Product: Keyboard Hub [ 4.335601] usb 1-1.3: Manufacturer: Apple, Inc. [ 4.340484] usb 1-1.3: SerialNumber: 000000000000 [ 4.346771] hub 1-1.3:1.0: USB hub found [ 4.352355] hub 1-1.3:1.0: 3 ports detected [ OK ] Started Journal Service. [ 4.408630] systemd[1]: Started Journal Service. [ 4.414398] systemd[1]: Starting Sockets. [ OK ] Reached target Sockets. [ 4.424224] systemd[1]: Reached target Sockets. [ 4.429168] systemd[1]: Starting Swap. [ OK ] Reached target Swap. [ 4.447723] systemd[1]: Reached target Swap. [ 4.452362] systemd[1]: Starting Local File Systems. [ OK ] Reached target Local File Systems. [ 4.471221] systemd[1]: Reached target Local File Systems. [ 4.642974] usb 1-1.3.2: new low-speed USB device number 6 using ehci-omap [ 4.774719] usb 1-1.3.2: New USB device found, idVendor=05ac, idProduct=0220 [ 4.782196] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.790100] usb 1-1.3.2: Product: Apple Keyboard [ 4.794982] usb 1-1.3.2: Manufacturer: Apple, Inc [ 4.804992] input: Apple, Inc Apple Keyboard as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.0/input/input1 [ 4.818389] apple 0003:05AC:0220.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-ehci-omap.0-1.3.2/input0 [ OK ] Started dracut cmdline hook.[ 4.835906] input: Apple, Inc Apple Keyboard as /devices/platform/usbhs_omap/ehci-omap.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.1/input/input2 [ 4.849395] apple 0003:05AC:0220.0003: input,hidraw2: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-ehci-omap.0-1.3.2/input1 Starting Setup Virtual Console... Starting dracut pre-udev hook... [ OK ] Started Setup Virtual Console. [ OK ] Reached target System Initialization. [ OK ] Started dracut pre-udev hook. Starting udev Kernel Device Manager... [ 5.301757] systemd-udevd[116]: starting version 195 [ OK ] Started udev Kernel Device Manager. Starting dracut pre-trigger hook... [ OK ] Started dracut pre-trigger hook. Starting udev Coldplug all Devices... [ 6.058929] [drm] Initialized drm 1.1.0 20060810 [ 6.100708] OMAP DSS rev 4.0 [ OK ] Started udev Coldplug all Devices. Starting Show Plymouth Boot Scre[ 6.131805] omapdrm: module is from the staging directory, the quality is unknown, you have been warned. en... [ 6.157287] dmm dmm: initialized all PAT entries [ 6.163635] omapdrm omapdrm.0: dvi has no driver.. skipping it Starting dracut initqueue hook... [ 6.375671] [drm] Enabling DMM ywrap scrolling [ 6.407135] Console: switching to colour frame buffer device 240x67 [ 6.447021] fb0: omapdrm frame buffer device [ 6.451568] drm: registered panic notifier [ 6.455993] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.462982] [drm] No driver support for vblank timestamp query. [ 6.474639] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ OK ] Started Show Plymouth Boot Screen. [ OK ] Reached target Basic System. [ 6.812835] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 7.936553] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 9.131439] systemd-journald[63]: Received SIGTERM [ 9.617065] type=1404 audit(946684806.656:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 11.652160] type=1403 audit(946684808.695:3): policy loaded auid=4294967295 ses=4294967295 [ 11.695922] systemd[1]: Successfully loaded SELinux policy in 2s 89ms 294us. [ 11.992187] systemd[1]: Relabelled /dev and /run in 178ms 558us. Welcome to Fedora 18 (Spherical Cow)! Starting Replay Read-Ahead Data... Starting Collect Read-Ahead Data... [ 12.777435] systemd-readahead[261]: Bumped block_nr parameter of 179:0 to 20480. This is a temporary hack and should be removed one day. Expecting device dev-ttyO2.device... [ OK ] Listening on Syslog Socket. [ OK ] Reached target Syslog. [ OK ] Reached target Remote File Systems. [ OK ] Listening on Delayed Shutdown Socket. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on Device-mapper event daemon FIFOs. Mounting POSIX Message Queue File System... Mounting Debug File System... [ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point. [ OK ] Reached target Encrypted Volumes. Starting Software RAID Monitor Takeover... Expecting device dev-disk-by\x2duuid-c9967aff\x2d5d9...b03fd.device... [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on udev Control Socket. Starting udev Coldplug all Devices... Starting udev Kernel Device Manager... Starting Configure read-only root support... Expecting device dev-disk-by\x2duuid-68A4\x2d8BB3.device... [ OK ] Started Replay Read-Ahead Data. [ OK ] Started Collect Read-Ahead Data. [ OK ] Mounted POSI[ 13.520843] systemd-udevd[271]: starting version 195 X Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Started Software RAID Monitor Takeover. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Configure read-only root support. Starting Load legacy module configuration... Starting Load Kernel Modules... Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... [ 14.556243] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) Starting Setup Virtual Console... [ 14.636016] smsc95xx v1.0.4 [ OK ] Stopped Trigger Flushing of Journal to Persistent Storage. Stopping Journal Service... [ OK ] Stopped Journal Service. Starting Journal Service... G[ 14.772644] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, b2:50:16:21:1c:54 [ 14.787353] usbcore: registered new interface driver smsc95xx [ OK ] Started Journal Service. [ OK ] Started udev Coldplug all Devices. [ OK ] Started Load legacy module configuration. [ OK ] Started Load Kernel Modules. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Apply Kernel Variables. [ OK ] Started Setup Virtual Console. [ OK ] Reached target Local File Systems (Pre). Mounting Temporary Directory... [ 15.317199] cfg80211: Calling CRDA to update world regulatory domain Starting Load Random Seed... Mounting Configuration File System... Starting udev Wait for Complete Device Initialization... [ 15.502990] omap-hdmi-audio omap-hdmi-audio: CPU DAI omap-hdmi-audio-dai not registered Starting Show Plymouth Boot Screen... [ 15.561706] omap-hdmi-audio omap-hdmi-audio: snd_soc_register_card failed (-517) [ 15.565093] cfg80211: World regulatory domain updated: [ 15.565093] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.565124] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.565124] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.565124] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.565124] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.565155] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.627655] platform omap-hdmi-audio: Driver omap-hdmi-audio requests probe deferral [ 15.638031] omap-hdmi-audio omap-hdmi-audio: CPU DAI omap-hdmi-audio-dai not registered [ 15.659942] omap-hdmi-audio omap-hdmi-audio: snd_soc_register_card failed (-517) [ 15.679077] platform omap-hdmi-audio: Driver omap-hdmi-audio requests probe deferral [ 15.691131] omap-hdmi-audio omap-hdmi-audio: platform omap-pcm-audio not registered [ 15.702484] omap-hdmi-audio omap-hdmi-audio: snd_soc_register_card failed (-517) [ 15.726623] platform omap-hdmi-audio: Driver omap-hdmi-audio requests probe deferral [ OK ] Mounted Temporary Directory. [ OK ] Started Load Random Seed. [ OK ] Mounted Configuration File System. [ OK ] Found device /dev/ttyO2. [ 15.893005] twl6040 1-004b: timeout waiting for READYINT [ 15.898620] twl6040 1-004b: automatic power-down failed [ 15.905792] twl6040-codec twl6040-codec: asoc: failed to probe CODEC twl6040-codec: -110 [ 15.914459] asoc: failed to instantiate card PandaBoardES: -110 [ 15.920837] omap-abe-twl6040 omap-abe-twl6040: snd_soc_register_card() failed: -110 [ 15.928955] omap-abe-twl6040: probe of omap-abe-twl6040 failed with error -110 [ OK ] Found device /dev/disk/by-uuid/c9967aff-5d93-42ed-badb-1585a27b03fd. Activating swap /dev/disk/by-uuid/c9967aff-5d93-42ed...1585a27b03fd... [ 16.239135] wl12xx: loaded [ 16.243865] omap-hdmi-audio omap-hdmi-audio: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok [ OK ] Found device /dev/disk/by-uuid/68A4-8BB3. Mounting /boot/uboot... [ 16.386962] Adding 511996k swap on /dev/mmcblk0p2. Priority:-1 extents:1 across:511996k SS [ OK ] Started udev Wait for Complete Device Initialization. [ OK ] Activated swap /dev/disk/by-uuid/c9967aff-5d93-42ed-badb-1585a27b03fd. [ OK ] Mounted /boot/uboot. [ OK ] Started Show Plymouth Boot Screen. [ OK ] Reached target Swap. Starting Initialize storage subsystems (RAID, LVM, etc.)... [ OK ] Reached target Sound Card. [ OK ] Started Initialize storage subsystems (RAID, LVM, etc.). Starting Initialize storage subsystems (RAID, LVM, etc.)... [ OK ] Started Initialize storage subsystems (RAID, LVM, etc.). [ OK ] Reached target Local File Systems. Starting Trigger Flushing of Journal to Persistent Storage... Starting Tell Plymouth To Write Out Runtime Data... Starting Security Auditing Service... Starting Recreate Volatile Files and Directories... [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Security Auditing Service. [ 17.789276] systemd-journald[349]: Received SIGUSR1 [ OK ] Started Trigger Flushing of Journal to Persistent Storage. [ OK ] Started Recreate Volatile Files and Directories. [ OK ] Reached target System Initialization. Starting Console System Startup Logging... [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting firewalld - dynamic firewall daemon... Starting Permit User Sessions... Starting Root Filesystem Auto-Resizer... Starting Self Monitoring and Reporting Technology (SMART) Daemon... [ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon. Starting NTP client/server... Starting System Logging Service... [ OK ] Started System Logging Service. Starting irqbalance daemon... Starting Login Service... Starting Accounts Service... Starting D-Bus System Message Bus... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Console System Startup Logging. [ OK ] Started Permit User Sessions. [ OK ] Started Root Filesystem Auto-Resizer. [ OK ] Started irqbalance daemon. Starting Wait for Plymouth Boot Screen to Quit... Starting Job spooling tools... [ OK ] Started Job spooling tools. Starting Command Scheduler... [ OK ] Started Command Scheduler. Starting Terminate Plymouth Boot Screen... [ OK ] Started Wait for Plymouth Boot Screen to Quit. [ OK ] Started Terminate Plymouth Boot Screen. [ OK ] Started NTP client/server. Starting Light Display Manager... [ 20.260467] ip6_tables: (C) 2000-2006 Netfilter Core Team Starting Serial Getty on ttyO2... [ OK ] Started Serial Getty on ttyO2. [ OK ] Reached target Login Prompts. [ 22.508239] Ebtables v2.0 registered [ 22.889678] Bluetooth: Core ver 2.16 [ 22.894042] NET: Registered protocol family 31 [ 22.898742] Bluetooth: HCI device and connection manager initialized [ 22.917938] Bluetooth: HCI socket layer initialized [ 22.923126] Bluetooth: L2CAP socket layer initialized [ 22.928558] Bluetooth: SCO socket layer initialized [ 22.972381] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.977966] Bluetooth: BNEP filters: protocol multicast [ 23.111480] wl12xx: firmware booted (Rev 6.3.10.2.115) [ 23.132690] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.261901] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.870391] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 24.879364] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 24.945495] nf_conntrack version 0.5.0 (15968 buckets, 63872 max) Fedora release 18 (Spherical Cow) Kernel 3.6.10-8.fc18.armv7hl.omap on an armv7l (ttyO2) panda-f18-v7hl login: root Password: Last login: Wed Jan 30 16:11:53 on pts/0 [root@panda-f18-v7hl ~]# [ 98.890624] Bluetooth: RFCOMM TTY layer initialized [ 98.895904] Bluetooth: RFCOMM socket layer initialized [ 98.901428] Bluetooth: RFCOMM ver 1.11 [root@panda-f18-v7hl ~]#