El mié, 23-08-2017 a las 09:13 -0700, Stewart Samuels escribió:
Hi Dennis,
I have been doing the same process as you with the exception that
I
change the UUIDs in extlinux.conf and /etc/fstab. The other
thing I
do, because I change update the UUIDs, is create a new
initramfs. I
will try again later without creating a new initramfs to see if I
can
get to where you are. BTW, I also am trying to load the Mate
spin,
not the server release.
Can you try an experiment for me? Can you try to upgrade your
system
doing a "dnf -y update" command. The reboot to ensure it reboots
with the new kernel? By doing the dnf upgrade, you will force
the
system to use dracut to create a new initramfs image. Let's see
if
this now works. This is essentially where the system began
failing
after f24. We need some confidence that the upgrade process is
not
going to kill our path forward.
I plugged in a usb2 ethernet adapter and updated the system and it
came
back fine, however I had to use a usb2 ethernet adapater in the
usb2
port as it seems the usb3 port is not working, the ethernet onboard
is
wired up via usb3. 4.12.5-300.fc26.armv7hl is the new kernel.
Dennis
Thanks.
Stewart
On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
--
Hello Dennis,
that looks beautiful. You have a running Odroid-XU4 with
actual
Kernel
with Fedora 26 !!
How did you manage it? I haven't so much luck with the
installation.
Thanks
Andreas
I ran
xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb
bs=4MiB
cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
I grabbed from https://github.com/hardkernel/u-boot/tree/odroid
xu4-
v201
7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
tzsw.bin.hardkernel and sd_fusing.sh
then ran
sh sd_fusing.sh /dev/sdb
I used parted to resize partition 4 mounted it and ran
xfs_growfs
so it
filled the sd card
I mounted partition 2 and edited extlinux/extlinux.conf adding
cpuidle.off=1 to the append line. I did have to edit etc/passwd
and
unlock the root account as initial-setup is not running.
of couse /dev/sdb was my sdcard, make sure you have the right
device
for yours. It does seem that the nic is not detected however.
Dennis
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-leave@lists.fedoraproject.o
rg
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-leave@lists.fedoraproject.org
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-leave@lists.fedoraproject.org