[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.2.0-0.rc5.git0.1.fc31.aarch64 (mockbuild@buildvm-aarch64-02.arm.fedoraproject.org) (gcc version 9.1.1 20190605 (Red Hat 9.1.1-2) (GCC)) #1 SMP Mon Jun 17 16:10:24 UTC 2019 [ 0.000000] Machine model: Raspberry Pi 3 Model B+ [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.70 by Das U-Boot [ 0.000000] efi: SMBIOS=0x3cb31000 MEMRESERVE=0x3c95d040 [ 0.000000] cma: Reserved 256 MiB at 0x000000002c000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000003dffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x3ddab780-0x3ddb8fff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000000000-0x000000003dffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000000fff] [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000007ff9fff] [ 0.000000] node 0: [mem 0x0000000007ffa000-0x0000000008005fff] [ 0.000000] node 0: [mem 0x0000000008006000-0x000000003cb2efff] [ 0.000000] node 0: [mem 0x000000003cb2f000-0x000000003cb3afff] [ 0.000000] node 0: [mem 0x000000003cb3b000-0x000000003df46fff] [ 0.000000] node 0: [mem 0x000000003df47000-0x000000003df47fff] [ 0.000000] node 0: [mem 0x000000003df48000-0x000000003dffffff] [ 0.000000] Zeroed struct page in unavailable ranges: 19 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003dffffff] [ 0.000000] On node 0 totalpages: 253952 [ 0.000000] DMA32 zone: 3968 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 253952 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 30 pages/cpu s83864 r8192 d30824 u122880 [ 0.000000] pcpu-alloc: s83864 r8192 d30824 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] CPU features: detected: ARM erratum 843419 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 249984 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,msdos2)/vmlinuz-5.2.0-0.rc5.git0.1.fc31.aarch64 root=UUID=59feab5f-39f5-4d4b-a113-b640a8e0313c ro cma=256MB panic=60 audit=0 [ 0.000000] audit: disabled (until reboot) [ 0.000000] Memory: 688596K/1015808K available (11324K kernel code, 2092K rwdata, 5196K rodata, 6208K init, 944K bss, 65068K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from kmem_cache_open+0x38/0x280 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 41908 entries in 164 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000254] Console: colour dummy device 80x25 [ 0.000869] printk: console [tty0] enabled [ 0.001037] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001073] pid_max: default: 32768 minimum: 301 [ 0.001286] LSM: Security Framework initializing [ 0.001359] Yama: becoming mindful. [ 0.001410] SELinux: Initializing. [ 0.001568] *** VALIDATE SELinux *** [ 0.003079] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.003869] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.003967] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.004017] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.004863] *** VALIDATE proc *** [ 0.005245] *** VALIDATE cgroup1 *** [ 0.005268] *** VALIDATE cgroup2 *** [ 0.006696] ASID allocator initialised with 32768 entries [ 0.006864] rcu: Hierarchical SRCU implementation. [ 0.010128] Remapping and enabling EFI services. [ 0.010852] smp: Bringing up secondary CPUs ... [ 0.011636] Detected VIPT I-cache on CPU1 [ 0.011713] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.012642] Detected VIPT I-cache on CPU2 [ 0.012693] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.013586] Detected VIPT I-cache on CPU3 [ 0.013630] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.013784] smp: Brought up 1 node, 4 CPUs [ 0.013886] SMP: Total of 4 processors activated. [ 0.013906] CPU features: detected: 32-bit EL0 Support [ 0.013927] CPU features: detected: CRC32 instructions [ 0.018284] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.018315] CPU: All CPU(s) started at EL2 [ 0.018364] alternatives: patching kernel code [ 0.021295] devtmpfs: initialized [ 0.028519] Registered cp15_barrier emulation handler [ 0.028562] Registered setend emulation handler [ 0.029116] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.029224] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.045731] pinctrl core: initialized pinctrl subsystem [ 0.047247] SMBIOS 3.0 present. [ 0.047285] DMI: raspberrypi rpi/rpi, BIOS 2018.09 09/11/2018 [ 0.048367] NET: Registered protocol family 16 [ 0.052725] cpuidle: using governor menu [ 0.053040] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.062013] DMA: preallocated 256 KiB pool for atomic allocations [ 0.062828] Serial: AMBA PL011 UART driver [ 0.086960] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.087001] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.087023] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.087044] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.207035] cryptd: max_cpu_qlen set to 1000 [ 1.219767] alg: No test for lzo-rle (lzo-rle-generic) [ 1.220131] alg: No test for lzo-rle (lzo-rle-scomp) [ 1.220498] alg: No test for 842 (842-generic) [ 1.220824] alg: No test for 842 (842-scomp) [ 1.241450] fbcon: Taking over console [ 1.241502] ACPI: Interpreter disabled. [ 1.242589] vgaarb: loaded [ 1.243281] SCSI subsystem initialized [ 1.243765] libata version 3.00 loaded. [ 1.244105] usbcore: registered new interface driver usbfs [ 1.244185] usbcore: registered new interface driver hub [ 1.244307] usbcore: registered new device driver usb [ 1.244713] pps_core: LinuxPPS API ver. 1 registered [ 1.244732] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.244778] PTP clock support registered [ 1.245069] EDAC MC: Ver: 3.0.0 [ 1.245923] Registered efivars operations [ 1.245985] efivars: get_next_variable: status=8000000000000007 [ 1.247324] NetLabel: Initializing [ 1.247345] NetLabel: domain hash size = 128 [ 1.247360] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.247455] NetLabel: unlabeled traffic allowed by default [ 1.248110] clocksource: Switched to clocksource arch_sys_counter [ 1.379003] VFS: Disk quotas dquot_6.6.0 [ 1.379128] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.379303] *** VALIDATE hugetlbfs *** [ 1.379919] simple-framebuffer 3e513000.framebuffer: framebuffer at 0x3e513000, 0x6d8c00 bytes, mapped to 0x(____ptrval____) [ 1.379957] simple-framebuffer 3e513000.framebuffer: format=a8r8g8b8, mode=1824x984x32, linelength=7296 [ 1.380705] Console: switching to colour frame buffer device 228x61 [ 1.422789] simple-framebuffer 3e513000.framebuffer: fb0: simplefb registered! [ 1.423310] pnp: PnP ACPI: disabled [ 1.433827] NET: Registered protocol family 2 [ 1.434948] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes) [ 1.435322] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 1.435764] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) [ 1.436211] TCP: Hash tables configured (established 8192 bind 8192) [ 1.436716] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.436995] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.437510] NET: Registered protocol family 1 [ 1.437711] NET: Registered protocol family 44 [ 1.437894] PCI: CLS 0 bytes, default 64 [ 1.438524] Trying to unpack rootfs image as initramfs... [ 3.391067] Freeing initrd memory: 19488K [ 3.392589] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 3.393111] kvm [1]: IPA Size Limit: 40bits [ 3.394566] kvm [1]: Hyp mode initialized successfully [ 3.647653] Initialise system trusted keyrings [ 3.647922] Key type blacklist registered [ 3.648460] workingset: timestamp_bits=37 max_order=18 bucket_order=0 [ 3.659214] zbud: loaded [ 3.671734] NET: Registered protocol family 38 [ 3.671953] Key type asymmetric registered [ 3.672116] Asymmetric key parser 'x509' registered [ 3.672394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 3.672976] io scheduler mq-deadline registered [ 3.673158] io scheduler kyber registered [ 3.673738] io scheduler bfq registered [ 3.674297] atomic64_test: passed [ 3.682593] efifb: probing for efifb [ 3.682922] efifb: No BGRT, not showing boot graphics [ 3.683124] efifb: framebuffer at 0x3e513000, using 7012k, total 7011k [ 3.683373] efifb: mode is 1824x984x32, linelength=7296, pages=1 [ 3.683599] efifb: scrolling: redraw [ 3.683744] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 3.684002] checking generic (3e513000 6d8c00) vs hw (3e513000 6d9000) [ 3.684009] fb0: switching to EFI VGA from simple [ 3.693938] Console: switching to colour dummy device 80x25 [ 3.694974] Console: switching to colour frame buffer device 228x61 [ 3.736948] fb0: EFI VGA frame buffer device [ 3.747234] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.758716] 3f215040.serial: ttyS1 at MMIO 0x0 (irq = 61, base_baud = 31250000) is a 16550 [ 6.049481] printk: console [ttyS1] enabled [ 6.065712] msm_serial: driver initialized [ 6.082246] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 6.099882] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 6.119545] libphy: Fixed MDIO Bus: probed [ 6.134648] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.151702] ehci-pci: EHCI PCI platform driver [ 6.166682] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.183413] ohci-pci: OHCI PCI platform driver [ 6.198542] usbcore: registered new interface driver usbserial_generic [ 6.215785] usbserial: USB Serial support registered for generic [ 6.232723] mousedev: PS/2 mouse device common for all mice [ 6.251712] device-mapper: uevent: version 1.0.3 [ 6.267500] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 6.288060] ledtrig-cpu: registered to indicate activity on CPUs [ 6.305664] EFI Variables Facility v0.08 2004-May-17 [ 6.321456] efivars: get_next_variable: status=8000000000000007 [ 6.338547] hidraw: raw HID events driver (C) Jiri Kosina [ 6.354804] usbcore: registered new interface driver usbhid [ 6.370821] usbhid: USB HID core driver [ 6.385315] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 6.402544] drop_monitor: Initializing network drop monitor service [ 6.419565] Initializing XFRM netlink socket [ 6.435126] NET: Registered protocol family 10 [ 6.495135] Segment Routing with IPv6 [ 6.509132] mip6: Mobile IPv6 [ 6.522083] NET: Registered protocol family 17 [ 6.537854] registered taskstats version 1 [ 6.551956] Loading compiled-in X.509 certificates [ 6.834706] Loaded X.509 cert 'Fedora kernel signing key: fb2fa7f63e98362e19c30899488f3e1295cf687e' [ 6.854446] zswap: loaded using pool lzo/zbud [ 6.895523] Key type big_key registered [ 6.931753] Key type encrypted registered [ 6.946100] ima: No TPM chip found, activating TPM-bypass! [ 6.961808] ima: Allocated hash algorithm: sha1 [ 6.976380] No architecture policies found [ 6.997170] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 66, base_baud = 0) is a PL011 rev2 [ 7.016825] serial serial0: tty port ttyAMA0 registered [ 7.034808] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-02-12 19:46 [ 7.054502] raspberrypi-clk raspberrypi-clk: CPU frequency range: min 600000000, max 1400000000 [ 7.079212] hctosys: unable to open rtc device (rtc0) [ 7.110828] Freeing unused kernel memory: 6208K [ 7.175500] Checked W+X mappings: passed, no W+X pages found [ 7.191926] rodata_test: all tests were successful [ 7.207250] Run /init as init process [ 7.265301] systemd[1]: System time before build time, advancing clock. [ 7.295402] efivars: get_next_variable: status=8000000000000007 [ 7.316972] systemd[1]: systemd v241-8.git9ef65cb.fc30 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.364885] systemd[1]: Detected architecture arm64. [ 7.381716] systemd[1]: Running in initial RAM disk. [ 7.448440] systemd[1]: Set hostname to . [ 7.468337] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 7.913812] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 7.934134] random: systemd: uninitialized urandom read (16 bytes read) [ 7.952840] systemd[1]: Reached target Slices. [ 7.998382] random: systemd: uninitialized urandom read (16 bytes read) [ 8.017727] systemd[1]: Listening on udev Kernel Socket. [ 8.068347] random: systemd: uninitialized urandom read (16 bytes read) [ 8.088015] systemd[1]: Listening on Journal Socket. [ 8.139082] systemd[1]: Listening on udev Control Socket. [ 11.635399] usb_phy_generic phy: phy supply vcc not found, using dummy regulator [ 11.781642] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property [ 11.821466] sdhci: Secure Digital Host Controller Interface driver [ 11.837648] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) [ 11.839965] sdhci: Copyright(c) Pierre Ossman [ 12.046850] sdhci-pltfm: SDHCI platform and OF driver helper [ 12.075598] dwc2 3f980000.usb: 3f980000.usb supply vusb_d not found, using dummy regulator [ 12.096969] dwc2 3f980000.usb: 3f980000.usb supply vusb_a not found, using dummy regulator [ 12.119248] sdhci-iproc 3f300000.sdhci: allocated mmc-pwrseq [ 12.151820] dwc2 3f980000.usb: DWC OTG Controller [ 12.169985] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 [ 12.170056] dwc2 3f980000.usb: irq 41, io mem 0x3f980000 [ 12.170363] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 12.170373] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.170381] usb usb1: Product: DWC OTG Controller [ 12.170389] usb usb1: Manufacturer: Linux 5.2.0-0.rc5.git0.1.fc31.aarch64 dwc2_hsotg [ 12.170396] usb usb1: SerialNumber: 3f980000.usb [ 12.171226] hub 1-0:1.0: USB hub found [ 12.171277] hub 1-0:1.0: 1 port detected [ 12.176555] mmc1: SDHCI controller on 3f300000.sdhci [3f300000.sdhci] using PIO [ 12.191956] random: fast init done [ 12.202687] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 12.204438] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 12.206135] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 12.209698] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 12.462513] mmc0: host does not support reading read-only switch, assuming write-enable [ 12.479668] mmc0: new high speed SDHC card at address 495c [ 12.544215] mmcblk0: mmc0:495c SD16G 14.9 GiB [ 12.549449] mmcblk0: p1 p2 p3 p4 [ 12.608309] usb 1-1: new high-speed USB device number 2 using dwc2 [ 12.629838] mmc1: new high speed SDIO card at address 0001 [ 12.878641] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 12.898634] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.921359] hub 1-1:1.0: USB hub found [ 12.937100] hub 1-1:1.0: 4 ports detected [ 13.268267] usb 1-1.1: new high-speed USB device number 3 using dwc2 [ 13.398723] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 13.417856] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 13.437128] hub 1-1.1:1.0: USB hub found [ 13.452123] hub 1-1.1:1.0: 3 ports detected [ 13.788152] usb 1-1.1.2: new low-speed USB device number 4 using dwc2 [ 13.936044] usb 1-1.1.2: New USB device found, idVendor=04f2, idProduct=0116, bcdDevice= 3.00 [ 13.955246] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 13.973244] usb 1-1.1.2: Product: USB Keyboard [ 13.988040] usb 1-1.1.2: Manufacturer: CHICONY [ 14.013901] input: CHICONY USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:04F2:0116.0001/input/input0 [ 14.109255] hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-3f980000.usb-1.1.2/input0 [ 14.428138] usb 1-1.1.1: new high-speed USB device number 5 using dwc2 [ 14.541952] random: crng init done [ 14.556335] random: 7 urandom warning(s) missed due to ratelimiting [ 14.574470] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00 [ 14.594161] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 14.879837] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed [ 14.902581] libphy: lan78xx-mdiobus: probed [ 15.013047] usbcore: registered new interface driver lan78xx [ 19.500811] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 22.051924] systemd-journald[277]: Received SIGTERM from PID 1 (systemd). [ 22.235688] printk: systemd: 19 output lines suppressed due to ratelimiting [ 23.219570] SELinux: Disabled at runtime. [ 23.436589] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time. [ 23.455488] systemd[1]: System time before build time, advancing clock. [ 23.665307] systemd[1]: systemd v241-8.git9ef65cb.fc30 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 23.709296] systemd[1]: Detected architecture arm64. [ 23.730345] systemd[1]: Set hostname to . [ 23.737700] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 25.213958] systemd[1]: /usr/lib/systemd/system/gssproxy.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/gssproxy.pid → /run/gssproxy.pid; please update the unit file accordingly. [ 25.268590] systemd[1]: /usr/lib/systemd/system/rpc-statd.service:14: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly. [ 25.343638] systemd[1]: /usr/lib/systemd/system/nfs-blkmap.service:10: PIDFile= references path below legacy directory /var/run/, updating /var/run/blkmapd.pid → /run/blkmapd.pid; please update the unit file accordingly. [ 25.609830] systemd[1]: /usr/lib/systemd/system/sssd.service:11: PIDFile= references path below legacy directory /var/run/, updating /var/run/sssd.pid → /run/sssd.pid; please update the unit file accordingly. [ 25.659582] systemd[1]: /usr/lib/systemd/system/mdmonitor.service:6: PIDFile= references path below legacy directory /var/run/, updating /var/run/mdadm/mdadm.pid → /run/mdadm/mdadm.pid; please update the unit file accordingly. [ 25.842411] systemd[1]: /usr/lib/systemd/system/iscsiuio.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/iscsiuio.pid → /run/iscsiuio.pid; please update the unit file accordingly. [ 26.405288] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [ 26.999003] zram: Added device: zram0 [ 27.246729] zram0: detected capacity change from 0 to 476000256 [ 27.363055] Adding 464840k swap on /dev/zram0. Priority:1000 extents:1 across:464840k SSFS [ 28.209078] systemd-journald[539]: File /run/log/journal/1a627af41d0746658bb4a7cbb5cc1b61/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 28.341540] systemd-journald[539]: Received request to flush runtime journal from PID 1 [ 28.367316] systemd-journald[539]: File /var/log/journal/1a627af41d0746658bb4a7cbb5cc1b61/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 31.158989] bcm2835-rng 3f104000.rng: hwrng registered [ 31.189845] vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 31.216043] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 31.240954] vchiq: vchiq_init_state: slot_zero = 000000009180c862 [ 31.627940] Bluetooth: Core ver 2.22 [ 31.643239] NET: Registered protocol family 31 [ 31.659333] Bluetooth: HCI device and connection manager initialized [ 31.679544] Bluetooth: HCI socket layer initialized [ 31.696144] Bluetooth: L2CAP socket layer initialized [ 31.728269] Bluetooth: SCO socket layer initialized [ 31.952581] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 31.973790] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 32.425590] Bluetooth: HCI UART driver ver 2.3 [ 32.441539] Bluetooth: HCI UART protocol H4 registered [ 32.458180] Bluetooth: HCI UART protocol BCSP registered [ 32.478405] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 32.501607] usbcore: registered new interface driver brcmfmac [ 32.545884] Bluetooth: HCI UART protocol LL registered [ 32.563069] Bluetooth: HCI UART protocol ATH3K registered [ 32.581260] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 32.601951] Bluetooth: HCI UART protocol Intel registered [ 32.620074] Bluetooth: HCI UART protocol Broadcom registered [ 32.637175] hci_uart_bcm serial0-0: serial0-0 supply vbat not found, using dummy regulator [ 32.637344] hci_uart_bcm serial0-0: serial0-0 supply vddio not found, using dummy regulator [ 32.657368] Bluetooth: HCI UART protocol QCA registered [ 32.694059] Bluetooth: HCI UART protocol AG6XX registered [ 32.708469] uart-pl011 3f201000.serial: no DMA platform data [ 32.711067] Bluetooth: HCI UART protocol Marvell registered [ 32.864315] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 32.898490] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 32.922832] Bluetooth: hci0: BCM: chip id 107 [ 32.940433] Bluetooth: hci0: BCM: features 0x2f [ 32.958609] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4 [ 32.983817] Bluetooth: hci0: BCM4345C0 [ 33.000192] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 [ 33.019115] bluetooth hci0: Direct firmware load for brcm/BCM4345C0.hcd failed with error -2 [ 33.040627] Bluetooth: hci0: BCM: Patch brcm/BCM4345C0.hcd not found [ 33.187462] media: Linux media interface: v0.10 [ 33.312775] videodev: Linux video capture interface: v2.00 [ 33.375054] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 33.419795] bcm2835_audio bcm2835_audio: card created with 8 channels [ 33.433962] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 33.547901] bcm2835-power bcm2835-power: Timeout waiting for grafx power OK [ 33.563644] bcm2835-power bcm2835-power: Timeout waiting for grafx power OK [ 34.705329] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 35.194087] RPC: Registered named UNIX socket transport module. [ 35.205878] RPC: Registered udp transport module. [ 35.216323] RPC: Registered tcp transport module. [ 35.226703] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 36.683686] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 36.693712] Bluetooth: BNEP filters: protocol multicast [ 36.708166] Bluetooth: BNEP socket layer initialized [ 50.771168] netpoll: netconsole: local port 6665 [ 50.771184] netpoll: netconsole: local IPv4 address 192.168.66.18 [ 50.771186] netpoll: netconsole: interface 'wlan0' [ 50.771188] netpoll: netconsole: remote port 6666 [ 50.771191] netpoll: netconsole: remote IPv4 address 192.168.66.1 [ 50.771196] netpoll: netconsole: remote ethernet address 00:25:90:fc:cb:ad [ 50.771207] netpoll: netconsole: device wlan0 not up yet, forcing it [ 54.848194] netpoll: netconsole: timeout waiting for carrier [ 59.927676] printk: console [netcon0] enabled [ 59.937612] netconsole: network logging started [ 65.381774] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 74.686581] tun: Universal TUN/TAP device driver, 1.6