[fedora-arm] Re: Beaglebone Black

[Zamir Sun]

Oh, forget to involve the list. So resend this in case someone else needed.

On 12/29/2015 12:57 PM, Robert Moskowitz wrote:
> On 12/28/2015 10:51 PM, Zamir SUN wrote:
> > Hi,
> > BBB can boot up to system[1]. And the current problem is display
> >
> > (see bug1123618)[2]. If you do not use display (such as use the
> > minimal image)it should be totally fine.
> > $ sudo fedora-arm-image-installer
> >
> > Usage: fedora-arm-image-installer <options>
> >
> > --image=IMAGE    - xz compressed image file name
> >    --target=TARGET  - target board
> > [A10-OLinuXino-Lime|A20-OLinuXino-Lime|A20-OLinuXino-Lime2|A20-OLinuXino_MICRO|am335x_boneblack|Bananapi|Bananapro|cm_fx6|Cubieboard|Cubieboard2|Cubietruck|jetson-tk1|Linksprite_pcDuino|Linksprite_pcDuino3|Linksprite_pcDuino3_Nano|Mele_A1000|Mini-X|mx6cuboxi|none|novena|omap4_panda|omap5_uevm|riotboard|trimslice|wandboard]
> >
> > --media=DEVICE   - media device file (/dev/[sdX|mmcblkX])
> >    --selinux=ON/OFF - Turn SELinux off/on as needed
> >    --norootpass     - Remove the root password
> >     -y            - Assumes yes, will not wait for confirmation
> >    --version        - Display version and exit
> >    --resizefs        - Resize root filesystem to fill media device
> >
> > Example: fedora-arm-image-installer --image=Fedora-Rawhide.xz
> > --target=panda --media=/dev/mmcblk0 --selinux=OFF
> > Error:  not found! Please choose an existing device.
> >
> > So the image can be installed by the script.
> >
> > Zamir
> >
> > [1]
> > http://fedoraproject.org/wiki/Architectures/ARM/F23/Installation/Hardware_St...
> >
> > [2] https://bugzilla.redhat.com/show_bug.cgi?id=1223618
> > On 12/29/2015 10:26 AM, Robert Moskowitz wrote:
> > > I did some more digging and MAY have my answer in:
> > >
> > > am335x_boneblack
> > >
> > > I see the script for am335x_boneblack
> > >
> > > If that is what the current method is, perhaps the wiki can be updated?
> > >
> > > On 12/28/2015 09:21 PM, Robert Moskowitz wrote:
> > > > I am trying to help out someone that has a BBB.  I am looking at:
> > > >
> > > > https://fedoraproject.org/wiki/Architectures/ARM/F23/Installation
> > > >
> > > > and the files referred to at:
> > > >
> > > > http://pwhalen.fedorapeople.org/Fedora/23/Beta/beaglebone/
> > > >
> > > > do not exist.
> > > >
> > > > What is the current status for BBB and F23?
> > > >
> > > > thank you.
> > > >
> > > > And is it covered in the fedora-installer-script?  I don't see it in
> > > > the board.d directory.  I do see some uboot files in the F23 image.
> > > >
> > > > thank you