>> I have a BeagleBone Black, original version, which has been
>> version of Fedora just fine. I tried putting
>> Fedora-Xfce-armhfp-23-10-sda.raw.xz on a 32GB micro SD card, and I can't
>> it to work. Most times I boot and get nothing on the screen. However, I
>> make an SSH connection to the board, so the board has booted. A few times
>> when I boot I get the the initial text screen, and then it goes blank.
>> installation notes mention there are quirks here. An even fewer times I
>> the text screen, followed by the GUI initial setup screen. At this point
>> can make a connection to the board. However, as soon as I move the mouse
>> little the machine locks up. The screen stops responding, and I can no
>> longer use SSH to make a connection to the board. That seems to happen
>> time I get to the initial setup screen.
> You might want to add a "console=ttyO0" to the append line in
> /boot/extlinux/extlinux.conf file
>> Does anyone have their Beaglebone Black working nicely with FC23?
> Yes, about 4 of them including Black and Green, I don't use hdmi or GUIs
I found that adding "console=tty00" made the initial text boot screen appear
each time I tried, but the GUI still failed to work. I then tried the server
version of Fedora 23 with "console=tty00". Sometimes I saw the text boot
screen for a few seconds, and sometimes I didn't. Either way I was left with
a black screen at the end of the boot process. I know the boot had
completed, as I could use SSH to connect - although not log in, since the
initial setup had not been completed.
When you say "black screen" do you mean on HDMI or serial console?
I tried editing the /etc/passwd and /etc/shadow to remove the root
and I tried to allow password free login in the sshd_config, but I still
couldn't use SSH to log on.
Do you use arm-image-installer to do this?