Am 15.11.2017 um 23:02 schrieb Stewart Samuels:
So, to follow up with my last transmission, I did indeed down load
latest updates to both F26 & F27. The kernel I just tested on F27 is
4.13.12-200. It appears Andreas is correct in that USB 3 still does not
respond from what I can see.
On 11/15/2017 08:53 AM, Stewart Samuels wrote:
> I was under the impression that the fix was going to be released into
> kernel 4.15 based on this response from you Peter. And based on your
> schedule, I was also under the impression that any of these fixes
> likely would not go into earlier releases, so I haven't tested them.
> As this was the last set of communications we have had regarding these
> issues, I was not aware that you had actually pushed the upstream
> patch. Now that I know you have, I will retest them by downloading
> the latest updates to F27.
with the actuell kernel 4.15.0-0.rc0.git6.1.fc28.armv7hl it seems to work:
[root@odroidh1 ~]# lsusb
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 002: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153
Gigabit Ethernet Adapter
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root@odroidh1 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 118G 0 disk
├─sda1 8:1 0 680M 0 part
└─sda2 8:2 0 6,1M 0 part
mmcblk1 179:0 0 14,9G 0 disk
├─mmcblk1p1 179:1 0 29M 0 part
├─mmcblk1p2 179:2 0 488M 0 part /boot
├─mmcblk1p3 179:3 0 488M 0 part [SWAP]
└─mmcblk1p4 179:4 0 14G 0 part /
Now the onboard network and the ssd is working on my Odroid HC1. Next
test is the Odroid Xu4.
Thanks to everybody who made work.