On Mon, Jan 26, 2015 at 01:20:25AM +0800, Daniel Veillard wrote:
I tried over and over following the instructions at
https://fedoraproject.org/wiki/Architectures/ARM/F21/Installation#For_the...
after copying the Fedora-Minimal-armhfp-21-5-sda.raw.xz pointed by the
doc n the sdcard (tried 2 different).
And the board doesn't boot ! No disk activity, nothing on the display.
I'm suspicious that the instruction only suggest to dd the uboot at
seek=8 so 8k into the block while the old script from Hans for F19
was doing both writing the uboot at 8 but also the uEnv-img.bin at
544.
Hmm, that's what (write seek=8 blocks) I did in my test when writing the
U-boot onto a micrSD card with this image
Fedora-Minimal-armhfp-21_Beta-4-sda.raw.xz[1]
$ sudo dd if=/tmp/root/usr/share/uboot/Cubietruck/u-boot-sunxi-with-spl.bin
of=/dev/mmcblk0 bs=1024 seek=8 conv=fsync,notrunc
317+1 records in
317+1 records out
325440 bytes (325 kB) copied, 0.455528 s, 714 kB/s
Wonder why you don't see disk activity. . .
Last month when I tried Cubietruck with F21, I was able to successfuly
boot F21 via micrSD card after some fiddling around. My notes here [2]
(based on the above URL you mention).
[1]
http://be.mirror.eurid.eu/fedora/linux/releases/test/21-Beta/Images/armhf...
[2]
https://kashyapc.fedorapeople.org/arm/installing-Fedora-21-on-microSD-car...
--
/kashyap