Works great for me! Thanks.
Does anyone have a beaglebone white? I'm still worried that this fix
will break that board.
Adam
On Thu, Nov 13, 2014 at 7:13 AM, Peter Robinson <pbrobinson(a)gmail.com> wrote:
Hi Adam,
Problem should now be fixed with -5
Can you test and provide karma so we can get it in GA.
https://admin.fedoraproject.org/updates/FEDORA-2014-14716/uboot-tools-201...
On Tue, Oct 28, 2014 at 12:37 AM, Adam Goode <adam(a)spicenitz.org> wrote:
> This is still present with -3. It looks like this version of U-Boot is
> not capable of booting from the internal eMMC on beaglebone black.
>
> U-Boot SPL 2014.10-g4647503-dirty (Oct 24 2014 - 16:47:41)
> omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear
> spl: mmc init failed: err - -19
> ### ERROR ### Please RESET the board ###
>
>
> I found at least another thread about this issue, from version 2014.07:
>
https://www.mail-archive.com/meta-ti@yoctoproject.org/msg04279.html
>
>
> Adam
>
> On Fri, Oct 24, 2014 at 1:21 PM, Peter Robinson <pbrobinson(a)gmail.com> wrote:
>> A minor bug and is fixed in uboot-tools-2014.10-3.fc21
>>
>> Peter
>>
>> On Sat, Oct 18, 2014 at 9:04 PM, Adam Goode <adam(a)spicenitz.org> wrote:
>>> Hopefully I did something wrong, but it's not working at all for me on
>>> the beaglebone black:
>>>
>>> Here is what I get when I try to boot from eMMC:
>>>
>>> U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
>>> omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear
>>> spl: mmc init failed: err - -19
>>> ### ERROR ### Please RESET the board ###
>>>
>>>
>>>
>>> Here is what I get when I make a new SD card from the latest minimal image:
>>>
>>>
>>> U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
>>>
>>> Watchdog enabled
>>> I2C: ready
>>> DRAM: 512 MiB
>>> NAND: 0 MiB
>>> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
>>> *** Error - No Valid Environment Area found
>>> *** Warning - bad CRC, using default environment
>>>
>>> Net: <ethaddr> not set. Validating first E-fuse MAC
>>> cpsw, usb_ether
>>> Hit any key to stop autoboot: 0
>>> switch to partitions #0, OK
>>> mmc0 is current device
>>> Scanning mmc 0:2...
>>> Failed to mount ext2 filesystem...
>>> ** Unrecognized filesystem type **
>>> Failed to mount ext2 filesystem...
>>> ** Unrecognized filesystem type **
>>> Failed to mount ext2 filesystem...
>>> ** Unrecognized filesystem type **
>>> Failed to mount ext2 filesystem...
>>> ** Unrecognized filesystem type **
>>> Failed to mount ext2 filesystem...
>>> ** Unrecognized filesystem type **
>>> Failed to mount ext2 filesystem...
>>> ** Unrecognized filesystem type **
>>> Failed to mount ext2 filesystem...
>>> ** Unrecognized filesystem type **
>>> Failed to mount ext2 filesystem...
>>> ** Unrecognized filesystem type **
>>> Card did not respond to voltage select!
>>> Booting from nand ...
>>>
>>> no devices available
>>>
>>> no devices available
>>> Bad Linux ARM zImage magic!
>>>
>>>
>>>
>>>
>>> When I am in the uboot command processor, I cannot select the internal
>>> eMMC at all:
>>>
>>> U-Boot# mmc dev 1
>>> Card did not respond to voltage select!
>>>
>>>
>>>
>>> Previously, I was booting with no problems from either eMMC or SD with F21.
>>>
>>>
>>>
>>> Thanks,
>>>
>>> Adam
>>>
>>>
>>> On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson <pbrobinson(a)gmail.com>
wrote:
>>>> Hi All,
>>>>
>>>> Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora
21.
>>>>
>>>>
https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21
>>>>
>>>> This release contains numerous fixes and improvements over the
>>>> currently shipping release including, but by no means limited to:
>>>> * Upstream generic distro support (huge thanks to Dennis Gilmore and
>>>> Steven Warren for their tireless work to get this upstream
>>>> * AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for
>>>> this tireless work on this)
>>>> * Numerous other improvements too long to name.
>>>>
>>>> New devices that we now enable in this release, in no particular order,
include:
>>>>
>>>> AllWinner:
>>>> A10-OLinuXino-Lime
>>>> A10s-OLinuXino-M
>>>> A13-OLinuXino
>>>> A13-OLinuXinoM
>>>> A20-OLinuXino_MICRO
>>>> Bananapi
>>>> Cubieboard
>>>> Cubieboard2
>>>> Cubietruck
>>>> Mele_A1000
>>>> Mele_A1000G
>>>> Mini-X
>>>> Mini-X-1Gb
>>>>
>>>> Tegra:
>>>> jetson-tk1
>>>>
>>>> i.MX6
>>>> cm_fx6 (Utilite)
>>>> riotboard
>>>>
>>>> It's not yet in nightly builds but I'm going to request it for
the
>>>> next Beta TC compose.
>>>>
>>>> Known issues:
>>>> * Panda is not yet ported to generic distro support
>>>>
>>>> Please test and provide feedback.
>>>>
>>>> Peter
>>>> _______________________________________________
>>>> arm mailing list
>>>> arm(a)lists.fedoraproject.org
>>>>
https://admin.fedoraproject.org/mailman/listinfo/arm