Hello together, I'm very satisfied with Fedora 34 on my Pinebook Pro. There are a few issues over: - Power LED needs to enable early in boot process - enable local NVME disc by enabling PCIe support - USB-C port (display output)
Hope this will be fixed in the coming weeks
I didn't managed to get follow issues resolved: - Sound ( Speaker and Headphone)
alsamixer # <F6> ("Select sound card") # <Down> (Select "rockchip,es8316") # <Enter> # <Right> x 24 (Until "DAC Stereo Enhancement" is selected) # <Up> x 7 (100% seems to make the right channel as loud as the left) # <Right> x 4 (Until "Left Headphone Mixer Left DAC" is selected) # <m> (To unmute) # <Right> x 3 (Until "Right Headphone Mixer Right DAC" is selected) # <m> (To unmute) # <Esc>
I've done these steps but can't hear any sound. Yes, hardware switch for Headphone / serial console is off.
- Graphical boot with Plymouth https://fedoramagazine.org/howto-change-the-plymouth-theme/
[root@pinebook-pro ~]# dnf install plymouth-theme-spinfinity
[root@pinebook-pro ~]# plymouth-set-default-theme spinfinity -R
[root@pinebook-pro ~]# plymouth-set-default-theme spinfinity [root@pinebook-pro ~]#
I've added rhgb in
/etc/grub.d/10_linux
/boot/loader/entries/9b45e0e7ff84454e94c98219bc8ffb3b-5.12.8-300.fc34.aarch64.conf /boot/grub2/grub.cfg
Laptop boots always with text.
Andreas
I'm very satisfied with Fedora 34 on my Pinebook Pro. There are a few issues over:
- Power LED needs to enable early in boot process
- enable local NVME disc by enabling PCIe support
- USB-C port (display output)
All of the above issues were documented as known issues in my blog post.
Hope this will be fixed in the coming weeks
Currently I'm not aware of anyone directly working on any of them and my time to do so is minimal ATM. There may be a fix for the display port issue output headed upstream but I've not had time to even test that.
I didn't managed to get follow issues resolved:
- Sound ( Speaker and Headphone)
I believe someone will need to write a UCM2 profile for this to work, again I've not had time to investigate.
alsamixer # <F6> ("Select sound card") # <Down> (Select "rockchip,es8316") # <Enter> # <Right> x 24 (Until "DAC Stereo Enhancement" is selected) # <Up> x 7 (100% seems to make the right channel as loud as the left) # <Right> x 4 (Until "Left Headphone Mixer Left DAC" is selected) # <m> (To unmute) # <Right> x 3 (Until "Right Headphone Mixer Right DAC" is selected) # <m> (To unmute) # <Esc>
I've done these steps but can't hear any sound. Yes, hardware switch for Headphone / serial console is off.
- Graphical boot with Plymouth
https://fedoramagazine.org/howto-change-the-plymouth-theme/
[root@pinebook-pro ~]# dnf install plymouth-theme-spinfinity
[root@pinebook-pro ~]# plymouth-set-default-theme spinfinity -R
[root@pinebook-pro ~]# plymouth-set-default-theme spinfinity [root@pinebook-pro ~]#
I've added rhgb in
Did you add quiet in too? AKA "rhgb quiet"
/etc/grub.d/10_linux
/boot/loader/entries/9b45e0e7ff84454e94c98219bc8ffb3b-5.12.8-300.fc34.aarch64.conf /boot/grub2/grub.cfg
Laptop boots always with text.
I've had graphical output work, to have full x86 style graphical someone needs to add UEFI BGRT support to the upstream firmware.
-
Andreas Reschke -
Peter Robinson