Re: Problems with Fedora-Server-armhfp-27-20170914.n.0-sda

[searider74]

Interesting!  The onboard ethernet for the odroid xu4 is not recognized either in f26.  Wireless is however.  Don't know if there is any relation between these systems.
Stewart

Sent from my T-Mobile 4G LTE Device

-------- Original message --------
From: Robert Moskowitz  
Date: 9/15/17  11:19 AM  (GMT-08:00) 
To: arm  
Subject: [fedora-arm] Problems with Fedora-Server-armhfp-27-20170914.n.0-sda

I think this one is even worst than 0913.  At least with what little I 
tested.

Still no ethernet, but the link is up.  Further, I forgot to mention 
last time, the config network option on the console is only offering the 
hostname to change.  No ethernet, not surprisingly.  But I set the 
hostname and it does not 'take'.  On continue it does not display an X 
in front of the networking option and once I do log in as root, the 
hostname is still localhost.  I can change the hostname with the normal 
commands.

I plugged in the TP-link USB wifi dongle, and the console went crazy 
scrolling messages.  I had to unplug the dongle.  The last few messages are:

[ 6040.253103] [<bf8a46ac>] (ath9k_cmn_init_crypto [ath9k_common]) from 
[<bf8ba0c8>] (ath9k_htc_probe_device+0x3c4/0x7fc [ath9k_htc])
[ 6040.264883] [<bf8ba0c8>] (ath9k_htc_probe_device [ath9k_htc]) from 
[<bf8b27b8>] (ath9k_htc_hw_init+0x18/0x38 [ath9k_htc])
[ 6040.275879] [<bf8b27b8>] (ath9k_htc_hw_init [ath9k_htc]) from 
[<bf8b3cc8>] (ath9k_hif_usb_firmware_cb+0x124/0x184 [ath9k_htc])
[ 6040.287329] [<bf8b3cc8>] (ath9k_hif_usb_firmware_cb [ath9k_htc]) from 
[<c07b0a78>] (request_firmware_work_func+0x40/0x68)
[ 6040.298319] [<c07b0a78>] (request_firmware_work_func) from 
[<c0364a10>] (process_one_work+0x254/0x42c)
[ 6040.307632] [<c0364a10>] (process_one_work) from [<c0365b34>] 
(worker_thread+0x2b8/0x434)
[ 6040.315815] [<c0365b34>] (worker_thread) from [<c036a67c>] 
(kthread+0x13c/0x154)
[ 6040.323217] [<c036a67c>] (kthread) from [<c0307e78>] 
(ret_from_fork+0x14/0x3c)
[ 6040.330596] ---[ end trace ead9f81706ad04d6 ]---
[ 6040.336440] ath9k_htc: Failed to initialize the device
[ 6040.341864] usb 4-1: ath9k_htc: USB layer deinitialized

I saved the complete console session if you want it or any other file.

Bob
_______________________________________________
arm mailing list -- [e-mail]
To unsubscribe send an email to [e-mail]

Problems with Fedora-Server-armhfp-27-20170914.n.0-sda

[Robert Moskowitz]

I have no problem with the onboard ethernet with F26 armhfp minimal 
server.  Just with the USB wifi.  But the USB wifi works fine wht F26 
armhfp Xfce workstation.

This is on a Cubieboard2.

Bob

On 09/15/2017 04:59 PM, searider74 wrote:
> Interesting!  The onboard ethernet for the odroid xu4 is not 
> recognized either in f26.  Wireless is however.  Don't know if there 
> is any relation between these systems.
>
> Stewart
>
> Sent from my T-Mobile 4G LTE Device
>
> -------- Original message --------
> From: Robert Moskowitz 
> Date: 9/15/17 11:19 AM (GMT-08:00)
> To: arm 
> Subject: [fedora-arm] Problems with 
> Fedora-Server-armhfp-27-20170914.n.0-sda
>
> I think this one is even worst than 0913.  At least with what little I
> tested.
>
> Still no ethernet, but the link is up.  Further, I forgot to mention
> last time, the config network option on the console is only offering the
> hostname to change.  No ethernet, not surprisingly.  But I set the
> hostname and it does not 'take'.  On continue it does not display an X
> in front of the networking option and once I do log in as root, the
> hostname is still localhost.  I can change the hostname with the normal
> commands.
>
> I plugged in the TP-link USB wifi dongle, and the console went crazy
> scrolling messages.  I had to unplug the dongle.  The last few 
> messages are:
>
> [ 6040.253103] [<bf8a46ac>] (ath9k_cmn_init_crypto [ath9k_common]) from
> [<bf8ba0c8>] (ath9k_htc_probe_device+0x3c4/0x7fc [ath9k_htc])
> [ 6040.264883] [<bf8ba0c8>] (ath9k_htc_probe_device [ath9k_htc]) from
> [<bf8b27b8>] (ath9k_htc_hw_init+0x18/0x38 [ath9k_htc])
> [ 6040.275879] [<bf8b27b8>] (ath9k_htc_hw_init [ath9k_htc]) from
> [<bf8b3cc8>] (ath9k_hif_usb_firmware_cb+0x124/0x184 [ath9k_htc])
> [ 6040.287329] [<bf8b3cc8>] (ath9k_hif_usb_firmware_cb [ath9k_htc]) from
> [<c07b0a78>] (request_firmware_work_func+0x40/0x68)
> [ 6040.298319] [<c07b0a78>] (request_firmware_work_func) from
> [<c0364a10>] (process_one_work+0x254/0x42c)
> [ 6040.307632] [<c0364a10>] (process_one_work) from [<c0365b34>]
> (worker_thread+0x2b8/0x434)
> [ 6040.315815] [<c0365b34>] (worker_thread) from [<c036a67c>]
> (kthread+0x13c/0x154)
> [ 6040.323217] [<c036a67c>] (kthread) from [<c0307e78>]
> (ret_from_fork+0x14/0x3c)
> [ 6040.330596] ---[ end trace ead9f81706ad04d6 ]---
> [ 6040.336440] ath9k_htc: Failed to initialize the device
> [ 6040.341864] usb 4-1: ath9k_htc: USB layer deinitialized
>
> I saved the complete console session if you want it or any other file.
>
> Bob
> _______________________________________________
> arm mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]

Problems with Fedora-Server-armhfp-27-20170914.n.0-sda

[Peter Robinson]

On Fri, Sep 15, 2017 at 9:59 PM, searider74  wrote:
> Interesting!  The onboard ethernet for the odroid xu4 is not recognized
> either in f26.  Wireless is however.  Don't know if there is any relation
> between these systems.

Unrelated, the XU4 ethernet is attached to a USB-3 interface and
there's apparently some issue/regression with that.
> Stewart
>
> Sent from my T-Mobile 4G LTE Device
>
> -------- Original message --------
> From: Robert Moskowitz 
> Date: 9/15/17 11:19 AM (GMT-08:00)
> To: arm 
> Subject: [fedora-arm] Problems with Fedora-Server-armhfp-27-20170914.n.0-sda
>
> I think this one is even worst than 0913.  At least with what little I
> tested.
>
> Still no ethernet, but the link is up.  Further, I forgot to mention
> last time, the config network option on the console is only offering the
> hostname to change.  No ethernet, not surprisingly.  But I set the
> hostname and it does not 'take'.  On continue it does not display an X
> in front of the networking option and once I do log in as root, the
> hostname is still localhost.  I can change the hostname with the normal
> commands.
>
> I plugged in the TP-link USB wifi dongle, and the console went crazy
> scrolling messages.  I had to unplug the dongle.  The last few messages are:
>
> [ 6040.253103] [<bf8a46ac>] (ath9k_cmn_init_crypto [ath9k_common]) from
> [<bf8ba0c8>] (ath9k_htc_probe_device+0x3c4/0x7fc [ath9k_htc])
> [ 6040.264883] [<bf8ba0c8>] (ath9k_htc_probe_device [ath9k_htc]) from
> [<bf8b27b8>] (ath9k_htc_hw_init+0x18/0x38 [ath9k_htc])
> [ 6040.275879] [<bf8b27b8>] (ath9k_htc_hw_init [ath9k_htc]) from
> [<bf8b3cc8>] (ath9k_hif_usb_firmware_cb+0x124/0x184 [ath9k_htc])
> [ 6040.287329] [<bf8b3cc8>] (ath9k_hif_usb_firmware_cb [ath9k_htc]) from
> [<c07b0a78>] (request_firmware_work_func+0x40/0x68)
> [ 6040.298319] [<c07b0a78>] (request_firmware_work_func) from
> [<c0364a10>] (process_one_work+0x254/0x42c)
> [ 6040.307632] [<c0364a10>] (process_one_work) from [<c0365b34>]
> (worker_thread+0x2b8/0x434)
> [ 6040.315815] [<c0365b34>] (worker_thread) from [<c036a67c>]
> (kthread+0x13c/0x154)
> [ 6040.323217] [<c036a67c>] (kthread) from [<c0307e78>]
> (ret_from_fork+0x14/0x3c)
> [ 6040.330596] ---[ end trace ead9f81706ad04d6 ]---
> [ 6040.336440] ath9k_htc: Failed to initialize the device
> [ 6040.341864] usb 4-1: ath9k_htc: USB layer deinitialized
>
> I saved the complete console session if you want it or any other file.
>
> Bob
> _______________________________________________
> arm mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]
>
> arm mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]