Re: Beaglebone Black

[Zamir Sun]

Oh, forget to involve the list. So resend this in case someone else needed.

On 12/29/2015 12:57 PM, Robert Moskowitz wrote:
> On 12/28/2015 10:51 PM, Zamir SUN wrote:
> > Hi,
> > BBB can boot up to system[1]. And the current problem is display
> >
> > (see bug1123618)[2]. If you do not use display (such as use the
> > minimal image)it should be totally fine.
> > $ sudo fedora-arm-image-installer
> >
> > Usage: fedora-arm-image-installer <options>
> >
> > --image=IMAGE    - xz compressed image file name
> >    --target=TARGET  - target board
> > [A10-OLinuXino-Lime|A20-OLinuXino-Lime|A20-OLinuXino-Lime2|A20-OLinuXino_MICRO|am335x_boneblack|Bananapi|Bananapro|cm_fx6|Cubieboard|Cubieboard2|Cubietruck|jetson-tk1|Linksprite_pcDuino|Linksprite_pcDuino3|Linksprite_pcDuino3_Nano|Mele_A1000|Mini-X|mx6cuboxi|none|novena|omap4_panda|omap5_uevm|riotboard|trimslice|wandboard]
> >
> > --media=DEVICE   - media device file (/dev/[sdX|mmcblkX])
> >    --selinux=ON/OFF - Turn SELinux off/on as needed
> >    --norootpass     - Remove the root password
> >     -y            - Assumes yes, will not wait for confirmation
> >    --version        - Display version and exit
> >    --resizefs        - Resize root filesystem to fill media device
> >
> > Example: fedora-arm-image-installer --image=Fedora-Rawhide.xz
> > --target=panda --media=/dev/mmcblk0 --selinux=OFF
> > Error:  not found! Please choose an existing device.
> >
> > So the image can be installed by the script.
> >
> > Zamir
> >
> > [1]
> > http://fedoraproject.org/wiki/Architectures/ARM/F23/Installation/Hardware_St...
> >
> > [2] https://bugzilla.redhat.com/show_bug.cgi?id=1223618
> > On 12/29/2015 10:26 AM, Robert Moskowitz wrote:
> > > I did some more digging and MAY have my answer in:
> > >
> > > am335x_boneblack
> > >
> > > I see the script for am335x_boneblack
> > >
> > > If that is what the current method is, perhaps the wiki can be updated?
> > >
> > > On 12/28/2015 09:21 PM, Robert Moskowitz wrote:
> > > > I am trying to help out someone that has a BBB.  I am looking at:
> > > >
> > > > https://fedoraproject.org/wiki/Architectures/ARM/F23/Installation
> > > >
> > > > and the files referred to at:
> > > >
> > > > http://pwhalen.fedorapeople.org/Fedora/23/Beta/beaglebone/
> > > >
> > > > do not exist.
> > > >
> > > > What is the current status for BBB and F23?
> > > >
> > > > thank you.
> > > >
> > > > And is it covered in the fedora-installer-script?  I don't see it in
> > > > the board.d directory.  I do see some uboot files in the F23 image.
> > > >
> > > > thank you

Beaglebone Black

[Tong Hui]

Awesome !!  zsun, thank you very much !

Finally the BBB could running fedora latest release version.

On Tue, Dec 29, 2015 at 8:15 PM, Zamir SUN  wrote:
> Oh, forget to involve the list. So resend this in case someone else needed.
>
> On 12/29/2015 12:57 PM, Robert Moskowitz wrote:
>
> On 12/28/2015 10:51 PM, Zamir SUN wrote:
> > > Hi,
> > > BBB can boot up to system[1]. And the current problem is display
> > >
> > > (see bug1123618)[2]. If you do not use display (such as use the
> > > minimal image)it should be totally fine.
> > > $ sudo fedora-arm-image-installer
> > >
> > > Usage: fedora-arm-image-installer <options>
> > >
> > > --image=IMAGE    - xz compressed image file name
> > >    --target=TARGET  - target board
> > >
> > > [A10-OLinuXino-Lime|A20-OLinuXino-Lime|A20-OLinuXino-Lime2|A20-OLinuXino_MICRO|am335x_boneblack|Bananapi|Bananapro|cm_fx6|Cubieboard|Cubieboard2|Cubietruck|jetson-tk1|Linksprite_pcDuino|Linksprite_pcDuino3|Linksprite_pcDuino3_Nano|Mele_A1000|Mini-X|mx6cuboxi|none|novena|omap4_panda|omap5_uevm|riotboard|trimslice|wandboard]
> > >
> > > --media=DEVICE   - media device file (/dev/[sdX|mmcblkX])
> > >    --selinux=ON/OFF - Turn SELinux off/on as needed
> > >    --norootpass     - Remove the root password
> > >     -y            - Assumes yes, will not wait for confirmation
> > >    --version        - Display version and exit
> > >    --resizefs        - Resize root filesystem to fill media device
> > >
> > > Example: fedora-arm-image-installer --image=Fedora-Rawhide.xz
> > > --target=panda --media=/dev/mmcblk0 --selinux=OFF
> > > Error:  not found! Please choose an existing device.
> > >
> > > So the image can be installed by the script.
> > >
> > > Zamir
> > >
> > > [1]
> > >
> > > http://fedoraproject.org/wiki/Architectures/ARM/F23/Installation/Hardware_St...
> > >
> > > [2] https://bugzilla.redhat.com/show_bug.cgi?id=1223618
> > > On 12/29/2015 10:26 AM, Robert Moskowitz wrote:
> > > > I did some more digging and MAY have my answer in:
> > > >
> > > > am335x_boneblack
> > > >
> > > > I see the script for am335x_boneblack
> > > >
> > > > If that is what the current method is, perhaps the wiki can be updated?
> > > >
> > > > On 12/28/2015 09:21 PM, Robert Moskowitz wrote:
> > > > > I am trying to help out someone that has a BBB.  I am looking at:
> > > > >
> > > > > https://fedoraproject.org/wiki/Architectures/ARM/F23/Installation
> > > > >
> > > > > and the files referred to at:
> > > > >
> > > > > http://pwhalen.fedorapeople.org/Fedora/23/Beta/beaglebone/
> > > > >
> > > > > do not exist.
> > > > >
> > > > > What is the current status for BBB and F23?
> > > > >
> > > > > thank you.
> > > > >
> > > > > And is it covered in the fedora-installer-script?  I don't see it in
> > > > > the board.d directory.  I do see some uboot files in the F23 image.
> > > > >
> > > > > thank you
>
> --
> Zamir SUN
> [e-mail]
> zsun in #fedora-zh #openshift on freenode.net
> _______________________________________________
> arm mailing list
> [e-mail]
> http://lists.fedoraproject.org/admin/lists/[e-mail]

Beaglebone Black

[Zamir Sun]

@tonghuix nope.
It is just better than the time we start testing it. The better thing is 
that I have tested VNC (while we are not able to test VNC by the time 
you file that bug) and VNC works fine.

zsun
On 12/29/2015 11:14 PM, tong hui wrote:
> Awesome !!  zsun, thank you very much !
>
> Finally the BBB could running fedora latest release version.
>
> On Tue, Dec 29, 2015 at 8:15 PM, Zamir SUN <[e-mail]
> > wrote:
> Oh, forget to involve the list. So resend this in case someone else
> needed.
>
>
> On 12/29/2015 12:57 PM, Robert Moskowitz wrote:
>
>     On 12/28/2015 10:51 PM, Zamir SUN wrote:
>
>         Hi,
>         1. BBB can boot up to system[1]. And the current problem is
>         display
>         (see bug1123618)[2]. If you do not use display (such as use the
>         minimal image)it should be totally fine.
>
>         2. $ sudo fedora-arm-image-installer
>
>         Usage: fedora-arm-image-installer <options>
>
>             --image=IMAGE    - xz compressed image file name
>             --target=TARGET  - target board
>         [A10-OLinuXino-Lime|A20-OLinuXino-Lime|A20-OLinuXino-Lime2|A20-OLinuXino_MICRO|am335x_boneblack|Bananapi|Bananapro|cm_fx6|Cubieboard|Cubieboard2|Cubietruck|jetson-tk1|Linksprite_pcDuino|Linksprite_pcDuino3|Linksprite_pcDuino3_Nano|Mele_A1000|Mini-X|mx6cuboxi|none|novena|omap4_panda|omap5_uevm|riotboard|trimslice|wandboard]
>
>             --media=DEVICE   - media device file (/dev/[sdX|mmcblkX])
>             --selinux=ON/OFF - Turn SELinux off/on as needed
>             --norootpass     - Remove the root password
>              -y            - Assumes yes, will not wait for confirmation
>             --version        - Display version and exit
>             --resizefs        - Resize root filesystem to fill media
>         device
>
>         Example: fedora-arm-image-installer --image=Fedora-Rawhide.xz
>         --target=panda --media=/dev/mmcblk0 --selinux=OFF
>         Error:  not found! Please choose an existing device.
>
>         So the image can be installed by the script.
>
>
>         Zamir
>
>
>         [1]
>         http://fedoraproject.org/wiki/Architectures/ARM/F23/Installation/Hardware_Status
>
>         [2] https://bugzilla.redhat.com/show_bug.cgi?id=1223618
>         On 12/29/2015 10:26 AM, Robert Moskowitz wrote:
>
>             I did some more digging and MAY have my answer in:
>
>             am335x_boneblack
>
>             I see the script for am335x_boneblack
>
>             If that is what the current method is, perhaps the wiki
>             can be updated?
>
>             On 12/28/2015 09:21 PM, Robert Moskowitz wrote:
>
>                 I am trying to help out someone that has a BBB.  I
>                 am looking at:
>
>                 https://fedoraproject.org/wiki/Architectures/ARM/F23/Installation
>
>                 and the files referred to at:
>
>                 http://pwhalen.fedorapeople.org/Fedora/23/Beta/beaglebone/
>
>                 do not exist.
>
>                 What is the current status for BBB and F23?
>
>                 thank you.
>
>                 And is it covered in the fedora-installer-script?  I
>                 don't see it in
>                 the board.d directory.  I do see some uboot files in
>                 the F23 image.
>
>                 thank you
>
>
>
>
> --
> Zamir SUN
> [e-mail] <mailto:[e-mail]>
> zsun in #fedora-zh #openshift on freenode.net <http://freenode.net>
> _______________________________________________
> arm mailing list
> [e-mail] <mailto:[e-mail]>
> http://lists.fedoraproject.org/admin/lists/[e-mail]
>
>
>
>
> --
> /***
> @ 启智开源 编码自由
> @ Open Mind, Open Source, Coding for Freedom!
> @ 佟辉 Tong Hui (Tony)
> @ Email [e-mail]
> @ Web https://tonghuix.io
> @ XMPP/Jabber tonghuix@ xmpp.jp
>
> http://xmpp.jp
>   */