2:17 a.m.
Hi there,
I've managed to get Fedora 26 run with kernel 4.6.5-300.fc24.armv7hl on
Odroid-XU4 with Cloudshell 2. The onbord RAID 1 (USB-Attached SCSI
(UAS)) is working with kernel 4.6.5-300.fc24.
[root@myodroid ~]# lsusb -d 152d:0561
Bus 004 Device 003: ID 152d:0561 JMicron Technology Corp. / JMicron USA
Technology Corp.
[root@myodroid ~]#
Next steps to do:
- move OS from SD-Card to more faster eMMC-Card. How to do it?
- Kernel update to actual version. I've update Kernel to
4.11.11-300.fc26 and system boots with 8 CPU (FC24 = 5 CPU), but only
the first part of kernel is booting; then it stops.
- compiling modules to activate the color LCD
Is there anybody who can help me with the first 2 steps ?
Thanks
Andreas
1:57 p.m.
Hello Andreas,
I have been away for awhile as my wife and I relocated from the East
Coast of the U.S. to Oregon. Now that we are settling in a bit, I am
once again finding some time to work on my Odroid XU4.
I hope all is well with you. I see you have been working hard on trying
to get the Odroid working with Fedora 26.
I have been periodically trying new versions of Fedora since Fedora 24
kernel 4.6.5-300.fc24, including Fedora 26. Something broke after the
4.6.5-300.fc24 release. I cannot tell if the problem lies in the newer
u-boot.bin or elsewhere. After the system got broken, I no longer get
any output though the serial cable to determine where such problems
lie. However, if I install the Hardkernel Ubuntu Mate with 4.9 kernel,
everything works fine. I get output through the serial cable and the
system boots up beautifully.
is it possible for you to email me a zipped copy of the u-boot.bin file
you are using to boot? Is it the 4.6.5-300.fc24 version?
Thanks.
Kind regards,
Stewart
On 07/25/2017 12:17 AM, arm_ml(a)rirasoft.de wrote:
Hi there,
I've managed to get Fedora 26 run with kernel 4.6.5-300.fc24.armv7hl
on Odroid-XU4 with Cloudshell 2. The onbord RAID 1 (USB-Attached SCSI
(UAS)) is working with kernel 4.6.5-300.fc24.
[root@myodroid ~]# lsusb -d 152d:0561
Bus 004 Device 003: ID 152d:0561 JMicron Technology Corp. / JMicron
USA Technology Corp.
[root@myodroid ~]#
Next steps to do:
- move OS from SD-Card to more faster eMMC-Card. How to do it?
- Kernel update to actual version. I've update Kernel to
4.11.11-300.fc26 and system boots with 8 CPU (FC24 = 5 CPU), but only
the first part of kernel is booting; then it stops.
- compiling modules to activate the color LCD
Is there anybody who can help me with the first 2 steps ?
Thanks
Andreas
_______________________________________________
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
2:57 p.m.
Hi Stewart,
----- Original Message -----
Hello Andreas,
I have been away for awhile as my wife and I relocated from the East
Coast of the U.S. to Oregon. Now that we are settling in a bit, I am
once again finding some time to work on my Odroid XU4.
I hope all is well with you. I see you have been working hard on trying
to get the Odroid working with Fedora 26.
I tested the Arndale (Exynos 5250) with F26 GA, there was an issue with
initial-setup (missing serial console ttySAC2), but otherwise it worked
quite well. Its not the same board, but the kernel *should* work.
>
> I have been periodically trying new versions of Fedora since Fedora 24
> kernel 4.6.5-300.fc24, including Fedora 26. Something broke after the
> 4.6.5-300.fc24 release. I cannot tell if the problem lies in the newer
> u-boot.bin or elsewhere. After the system got broken, I no longer get
> any output though the serial cable to determine where such problems
> lie. However, if I install the Hardkernel Ubuntu Mate with 4.9 kernel,
> everything works fine. I get output through the serial cable and the
> system boots up beautifully.
>
> is it possible for you to email me a zipped copy of the u-boot.bin file
> you are using to boot? Is it the 4.6.5-300.fc24 version?
>
> Thanks.
>
> Kind regards,
> Stewart
>
>
> On 07/25/2017 12:17 AM, arm_ml(a)rirasoft.de wrote:
> > Hi there,
> >
> > I've managed to get Fedora 26 run with kernel 4.6.5-300.fc24.armv7hl
> > on Odroid-XU4 with Cloudshell 2. The onbord RAID 1 (USB-Attached SCSI
> > (UAS)) is working with kernel 4.6.5-300.fc24.
> >
> >
> > [root@myodroid ~]# lsusb -d 152d:0561
> > Bus 004 Device 003: ID 152d:0561 JMicron Technology Corp. / JMicron
> > USA Technology Corp.
> > [root@myodroid ~]#
> >
> > Next steps to do:
> >
> > - move OS from SD-Card to more faster eMMC-Card. How to do it?
> > - Kernel update to actual version. I've update Kernel to
> > 4.11.11-300.fc26 and system boots with 8 CPU (FC24 = 5 CPU), but only
> > the first part of kernel is booting; then it stops.
> > - compiling modules to activate the color LCD
> >
> > Is there anybody who can help me with the first 2 steps ?
> >
> >
> > Thanks
> > Andreas
> > _______________________________________________
> > arm mailing list -- arm(a)lists.fedoraproject.org
> > To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
3:17 p.m.
Hello Paul,
I'm not getting any output from the Odroid serial port, even from
u-boot.bin. How can I tell if the issue is from u-boot.bin or after?
Also, has the initial-setup issue fixed and is it available in the
current image download for the F26 spins?
Stewart
On 08/09/2017 12:57 PM, Paul Whalen wrote:
Hi Stewart,
----- Original Message -----
> Hello Andreas,
>
> I have been away for awhile as my wife and I relocated from the East
> Coast of the U.S. to Oregon. Now that we are settling in a bit, I am
> once again finding some time to work on my Odroid XU4.
>
> I hope all is well with you. I see you have been working hard on trying
> to get the Odroid working with Fedora 26.
I tested the Arndale (Exynos 5250) with F26 GA, there was an issue with
initial-setup (missing serial console ttySAC2), but otherwise it worked
quite well. Its not the same board, but the kernel *should* work.
> I have been periodically trying new versions of Fedora since Fedora 24
> kernel 4.6.5-300.fc24, including Fedora 26. Something broke after the
> 4.6.5-300.fc24 release. I cannot tell if the problem lies in the newer
> u-boot.bin or elsewhere. After the system got broken, I no longer get
> any output though the serial cable to determine where such problems
> lie. However, if I install the Hardkernel Ubuntu Mate with 4.9 kernel,
> everything works fine. I get output through the serial cable and the
> system boots up beautifully.
>
> is it possible for you to email me a zipped copy of the u-boot.bin file
> you are using to boot? Is it the 4.6.5-300.fc24 version?
>
> Thanks.
>
> Kind regards,
> Stewart
>
>
> On 07/25/2017 12:17 AM, arm_ml(a)rirasoft.de wrote:
>> Hi there,
>>
>> I've managed to get Fedora 26 run with kernel 4.6.5-300.fc24.armv7hl
>> on Odroid-XU4 with Cloudshell 2. The onbord RAID 1 (USB-Attached SCSI
>> (UAS)) is working with kernel 4.6.5-300.fc24.
>>
>>
>> [root@myodroid ~]# lsusb -d 152d:0561
>> Bus 004 Device 003: ID 152d:0561 JMicron Technology Corp. / JMicron
>> USA Technology Corp.
>> [root@myodroid ~]#
>>
>> Next steps to do:
>>
>> - move OS from SD-Card to more faster eMMC-Card. How to do it?
>> - Kernel update to actual version. I've update Kernel to
>> 4.11.11-300.fc26 and system boots with 8 CPU (FC24 = 5 CPU), but only
>> the first part of kernel is booting; then it stops.
>> - compiling modules to activate the color LCD
>>
>> Is there anybody who can help me with the first 2 steps ?
>>
>>
>> Thanks
>> Andreas
>> _______________________________________________
>> arm mailing list -- arm(a)lists.fedoraproject.org
>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
5:26 a.m.
On Wed, Aug 9, 2017 at 9:17 PM, Stewart Samuels <searider74(a)gmail.com> wrote:
Hello Paul,
I'm not getting any output from the Odroid serial port, even from
u-boot.bin. How can I tell if the issue is from u-boot.bin or after? Also,
If you don't get output from u-boot it's a u-boot or a physical config problem
has the initial-setup issue fixed and is it available in the current
image
download for the F26 spins?
No, we don't respin images once they've gone GA, it will be in F-27
> Stewart
>
>
> On 08/09/2017 12:57 PM, Paul Whalen wrote:
>>
>> Hi Stewart,
>>
>> ----- Original Message -----
>>>
>>> Hello Andreas,
>>>
>>> I have been away for awhile as my wife and I relocated from the East
>>> Coast of the U.S. to Oregon. Now that we are settling in a bit, I am
>>> once again finding some time to work on my Odroid XU4.
>>>
>>> I hope all is well with you. I see you have been working hard on trying
>>> to get the Odroid working with Fedora 26.
>>
>> I tested the Arndale (Exynos 5250) with F26 GA, there was an issue with
>> initial-setup (missing serial console ttySAC2), but otherwise it worked
>> quite well. Its not the same board, but the kernel *should* work.
>>
>>> I have been periodically trying new versions of Fedora since Fedora 24
>>> kernel 4.6.5-300.fc24, including Fedora 26. Something broke after the
>>> 4.6.5-300.fc24 release. I cannot tell if the problem lies in the newer
>>> u-boot.bin or elsewhere. After the system got broken, I no longer get
>>> any output though the serial cable to determine where such problems
>>> lie. However, if I install the Hardkernel Ubuntu Mate with 4.9 kernel,
>>> everything works fine. I get output through the serial cable and the
>>> system boots up beautifully.
>>>
>>> is it possible for you to email me a zipped copy of the u-boot.bin file
>>> you are using to boot? Is it the 4.6.5-300.fc24 version?
>>>
>>> Thanks.
>>>
>>> Kind regards,
>>> Stewart
>>>
>>>
>>> On 07/25/2017 12:17 AM, arm_ml(a)rirasoft.de wrote:
>>>>
>>>> Hi there,
>>>>
>>>> I've managed to get Fedora 26 run with kernel 4.6.5-300.fc24.armv7hl
>>>> on Odroid-XU4 with Cloudshell 2. The onbord RAID 1 (USB-Attached SCSI
>>>> (UAS)) is working with kernel 4.6.5-300.fc24.
>>>>
>>>>
>>>> [root@myodroid ~]# lsusb -d 152d:0561
>>>> Bus 004 Device 003: ID 152d:0561 JMicron Technology Corp. / JMicron
>>>> USA Technology Corp.
>>>> [root@myodroid ~]#
>>>>
>>>> Next steps to do:
>>>>
>>>> - move OS from SD-Card to more faster eMMC-Card. How to do it?
>>>> - Kernel update to actual version. I've update Kernel to
>>>> 4.11.11-300.fc26 and system boots with 8 CPU (FC24 = 5 CPU), but only
>>>> the first part of kernel is booting; then it stops.
>>>> - compiling modules to activate the color LCD
>>>>
>>>> Is there anybody who can help me with the first 2 steps ?
>>>>
>>>>
>>>> Thanks
>>>> Andreas
>>>> _______________________________________________
>>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>>
>>> _______________________________________________
>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
5:29 a.m.
Am 10.08.2017 um 12:26 schrieb Peter Robinson:
On Wed, Aug 9, 2017 at 9:17 PM, Stewart Samuels
<searider74(a)gmail.com> wrote:
> Hello Paul,
>
> I'm not getting any output from the Odroid serial port, even from
> u-boot.bin. How can I tell if the issue is from u-boot.bin or after? Also,
If you don't get output from u-boot it's a u-boot or a physical config problem
> has the initial-setup issue fixed and is it available in the current image
> download for the F26 spins?
No, we don't respin images once they've gone GA, it will be in F-27
Do I understand: Odroid-XU4 support will be in F-27?
That will be fine.
> Stewart
>
>
> On 08/09/2017 12:57 PM, Paul Whalen wrote:
>>
>> Hi Stewart,
>>
>> ----- Original Message -----
>>>
>>> Hello Andreas,
>>>
>>> I have been away for awhile as my wife and I relocated from the East
>>> Coast of the U.S. to Oregon. Now that we are settling in a bit, I am
>>> once again finding some time to work on my Odroid XU4.
>>>
>>> I hope all is well with you. I see you have been working hard on trying
>>> to get the Odroid working with Fedora 26.
>>
>> I tested the Arndale (Exynos 5250) with F26 GA, there was an issue with
>> initial-setup (missing serial console ttySAC2), but otherwise it worked
>> quite well. Its not the same board, but the kernel *should* work.
>>
>>> I have been periodically trying new versions of Fedora since Fedora 24
>>> kernel 4.6.5-300.fc24, including Fedora 26. Something broke after the
>>> 4.6.5-300.fc24 release. I cannot tell if the problem lies in the newer
>>> u-boot.bin or elsewhere. After the system got broken, I no longer get
>>> any output though the serial cable to determine where such problems
>>> lie. However, if I install the Hardkernel Ubuntu Mate with 4.9 kernel,
>>> everything works fine. I get output through the serial cable and the
>>> system boots up beautifully.
>>>
>>> is it possible for you to email me a zipped copy of the u-boot.bin file
>>> you are using to boot? Is it the 4.6.5-300.fc24 version?
>>>
>>> Thanks.
>>>
>>> Kind regards,
>>> Stewart
>>>
>>>
>>> On 07/25/2017 12:17 AM, arm_ml(a)rirasoft.de wrote:
>>>>
>>>> Hi there,
>>>>
>>>> I've managed to get Fedora 26 run with kernel 4.6.5-300.fc24.armv7hl
>>>> on Odroid-XU4 with Cloudshell 2. The onbord RAID 1 (USB-Attached SCSI
>>>> (UAS)) is working with kernel 4.6.5-300.fc24.
>>>>
>>>>
>>>> [root@myodroid ~]# lsusb -d 152d:0561
>>>> Bus 004 Device 003: ID 152d:0561 JMicron Technology Corp. / JMicron
>>>> USA Technology Corp.
>>>> [root@myodroid ~]#
>>>>
>>>> Next steps to do:
>>>>
>>>> - move OS from SD-Card to more faster eMMC-Card. How to do it?
>>>> - Kernel update to actual version. I've update Kernel to
>>>> 4.11.11-300.fc26 and system boots with 8 CPU (FC24 = 5 CPU), but only
>>>> the first part of kernel is booting; then it stops.
>>>> - compiling modules to activate the color LCD
>>>>
>>>> Is there anybody who can help me with the first 2 steps ?
>>>>
>>>>
>>>> Thanks
>>>> Andreas
>>>> _______________________________________________
>>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>>
>>> _______________________________________________
>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
_______________________________________________
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
9:20 a.m.
On 11 August 2017 at 06:29, Andreas Reschke <arm_ml(a)rirasoft.de> wrote:
Am 10.08.2017 um 12:26 schrieb Peter Robinson:
> On Wed, Aug 9, 2017 at 9:17 PM, Stewart Samuels <searider74(a)gmail.com>
wrote:
>> Hello Paul,
>>
>> I'm not getting any output from the Odroid serial port, even from
>> u-boot.bin. How can I tell if the issue is from u-boot.bin or after?
Also,
>
> If you don't get output from u-boot it's a u-boot or a physical config
problem
>
>> has the initial-setup issue fixed and is it available in the current
image
>> download for the F26 spins?
>
> No, we don't respin images once they've gone GA, it will be in F-27
Do I understand: Odroid-XU4 support will be in F-27?
That will be fine.
Possibly. It is always good to check at the beta stage for F27 that it
didn't get dropped or corrupted somewhere. This is one of those where the
interested party must keep up with versus expecting Release Engineering to
do so for them... [mainly because releng has a limited time and energy
budget.]
--
Stephen J Smoogen.
7:25 p.m.
Ok. The u-boot issue was my mistake. I was trying to use the
/usr/share/uboot/odroid u-boot files instead of the
/usr/share/uboot/odroid-xu3 files. Now I am getting output to the
serial console and the system begins the boot process as expected.
However, it hangs in the kernel seemingly trying to do something with
the network. Anyone have any ideas as to what I can try to get past
this? Following is my serial console output:
U-Boot 2017.05 (Jun 24 2017 - 16:40:39 +0000) for ODROID-XU3
CPU: Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type: xu4
DRAM: 2 GiB
MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
mmc_init: -5, time 4
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
513 bytes read in 15 ms (33.2 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command: autoboot
Ignoring malformed menu command: hidden
Ignoring unknown command: totaltimeout
Fedora-Mate-armhfp-26-1.5 Boot Options.
1: Fedora-Mate-armhfp-26-1.5 (4.11.8-300.fc26.armv7hl)
Enter choice: 1: Fedora-Mate-armhfp-26-1.5 (4.11.8-300.fc26.armv7hl)
Retrieving file: /initramfs-4.11.8-300.fc26.armv7hl.img
55227208 bytes read in 15615 ms (3.4 MiB/s)
Retrieving file: /vmlinuz-4.11.8-300.fc26.armv7hl
6267616 bytes read in 503 ms (11.9 MiB/s)
append: ro root=UUID=01a7a7b0-fb7b-4b87-a2b4-c330daaab202 cma=192MB
Retrieving file: /dtb-4.11.8-300.fc26.armv7hl/exynos5422-odroidxu4.dtb
54941 bytes read in 277 ms (193.4 KiB/s)
Kernel image @ 0x42000000 [ 0x000000 - 0x5fa2e0 ]
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Ramdisk to 4cb54000, end 4ffff348 ... OK
Loading Device Tree to 4cb43000, end 4cb5369c ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x100
[ 0.000000] Linux version 4.11.8-300.fc26.armv7hl
(mockbuild(a)buildvm-armv7-13.arm.fedoraproject.org) (gcc version 7.1.1 20177
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created DMA memory pool at 0xbe200000,
size 8 MiB
[ 0.000000] OF: reserved mem: initialized node region_mfc_right,
compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0xbbe00000,
size 36 MiB
[ 0.000000] OF: reserved mem: initialized node region_mfc_left,
compatible id shared-dma-pool
[ 0.000000] cma: Reserved 192 MiB at 0xafc00000
[ 0.000000] Samsung CPU ID: 0xe5422001
[ 0.000000] Running under secure firmware.
[ 0.000000] percpu: Embedded 15 pages/cpu @eede0000 s31628 r8192
d21620 u61440
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 505664
[ 0.000000] Kernel command line: ro
root=UUID=01a7a7b0-fb7b-4b87-a2b4-c330daaab202 cma=192MB
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Memory: 1744476K/2029568K available (7440K kernel code,
1301K rwdata, 3528K rodata, 2048K init, 518K bss, 88484K)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0a4408c (8433 kB)
[ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB)
[ 0.000000] .data : 0xc1000000 - 0xc1145584 (1302 kB)
[ 0.000000] .bss : 0xc1145584 - 0xc11c7160 ( 519 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] GIC physical location is 0x10481000
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps
every 89478484971ns
[ 0.007592] Console: colour dummy device 80x30
[ 0.008712] console [tty0] enabled
[ 0.008774] Calibrating delay loop (skipped), value calculated using
timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.008835] pid_max: default: 32768 minimum: 301
[ 0.009324] Security Framework initialized
[ 0.009362] Yama: becoming mindful.
[ 0.009409] SELinux: Initializing.
[ 0.009826] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.009866] Mountpoint-cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.011164] CPU: Testing write buffer coherency: ok
[ 0.011237] ftrace: allocating 31692 entries in 62 pages
[ 0.090881] CPU0: update cpu_capacity 448
[ 0.090931] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.091688] Setting up static identity map for 0x40300000 - 0x40300098
[ 0.092453] ARM CCI driver probed
[ 0.092684] Exynos MCPM support installed
[ 0.101287] EFI services will not be available.
[ 0.102007] smp: Bringing up secondary CPUs ...
[ 0.103098] CPU1: update cpu_capacity 448
[ 0.103106] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.104253] CPU2: update cpu_capacity 448
[ 0.104261] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.105393] CPU3: update cpu_capacity 448
[ 0.105401] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[ 0.106573] CPU4: update cpu_capacity 1535
[ 0.106582] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.107833] CPU5: update cpu_capacity 1535
[ 0.107841] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.109009] CPU6: update cpu_capacity 1535
[ 0.109017] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.110172] CPU7: update cpu_capacity 1535
[ 0.110180] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.110322] smp: Brought up 1 node, 8 CPUs
[ 0.110632] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[ 0.110660] CPU: WARNING: CPU(s) started in wrong/inconsistent modes
(primary CPU mode 0x1a)
[ 0.110698] CPU: This may indicate a broken bootloader or firmware.
[ 0.113438] devtmpfs: initialized
[ 0.136806] VFP support v0.3: implementor 41 architecture 2 part 30
variant 7 rev 3
[ 0.137402] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.137466] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.149460] pinctrl core: initialized pinctrl subsystem
[ 0.153109] NET: Registered protocol family 16
[ 0.155535] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.160694] cpuidle: using governor menu
[ 0.161950] No ATAGs?
[ 0.162295] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
watchpoint registers.
[ 0.162357] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.164179] Serial: AMBA PL011 UART driver
[ 0.169405] random: fast init done
[ 0.201022] EXYNOS5420 PMU initialized
[ 0.243665] vgaarb: loaded
[ 0.244725] SCSI subsystem initialized
[ 0.245461] usbcore: registered new interface driver usbfs
[ 0.245582] usbcore: registered new interface driver hub
[ 0.245794] usbcore: registered new device driver usb
[ 0.248255] NetLabel: Initializing
[ 0.248292] NetLabel: domain hash size = 128
[ 0.248316] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.248417] NetLabel: unlabeled traffic allowed by default
[ 0.248930] clocksource: Switched to clocksource mct-frc
[ 0.351833] VFS: Disk quotas dquot_6.6.0
[ 0.352046] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.371166] NET: Registered protocol family 2
[ 0.372401] TCP established hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.372542] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.372744] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.373056] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.373130] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.373721] NET: Registered protocol family 1
[ 0.374567] Unpacking initramfs...
[ 4.807852] Freeing initrd memory: 53936K
[ 4.887021] audit: initializing netlink subsys (disabled)
[ 4.887254] audit: type=2000 audit(4.831:1): state=initialized
audit_enabled=0 res=1
[ 4.887633] Initialise system trusted keyrings
[ 4.887849] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 4.895726] zbud: loaded
[ 5.191665] NET: Registered protocol family 38
[ 5.191703] Key type asymmetric registered
[ 5.191726] Asymmetric key parser 'x509' registered
[ 5.191813] bounce: pool size: 64 pages
[ 5.191908] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 250)
[ 5.192213] io scheduler noop registered
[ 5.192237] io scheduler deadline registered
[ 5.192640] io scheduler cfq registered (default)
[ 5.192665] io scheduler mq-deadline registered
[ 5.193307] atomic64_test: passed
[ 5.217683] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 5.227351] Serial: AMBA driver
[ 5.227636] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58,
base_baud = 0) is a S3C6400/10
[ 5.228075] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59,
base_baud = 0) is a S3C6400/10
[ 5.228459] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60,
base_baud = 0) is a S3C6400/10
[ 5.985336] console [ttySAC2] enabled
[ 5.989406] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61,
base_baud = 0) is a S3C6400/10
[ 5.999986] msm_serial: driver initialized
[ 6.003018] STMicroelectronics ASC driver initialized
[ 6.012392] libphy: Fixed MDIO Bus: probed
[ 6.015806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.021609] ehci-pci: EHCI PCI platform driver
[ 6.026067] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.032152] ohci-pci: OHCI PCI platform driver
[ 6.036611] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.043252] usbcore: registered new interface driver usbserial
[ 6.048747] usbcore: registered new interface driver usbserial_generic
[ 6.055243] usbserial: USB Serial support registered for generic
[ 6.061441] mousedev: PS/2 mouse device common for all mice
[ 6.074583] device-mapper: uevent: version 1.0.3
[ 6.078438] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
initialised: dm-devel(a)redhat.com
[ 6.089235] ledtrig-cpu: registered to indicate activity on CPUs
[ 6.094218] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.099403] usbcore: registered new interface driver usbhid
[ 6.104724] usbhid: USB HID core driver
[ 6.111414] drop_monitor: Initializing network drop monitor service
[ 6.116525] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.121784] Initializing XFRM netlink socket
[ 6.126613] NET: Registered protocol family 10
On 08/10/2017 03:26 AM, Peter Robinson wrote:
On Wed, Aug 9, 2017 at 9:17 PM, Stewart Samuels
<searider74(a)gmail.com> wrote:
> Hello Paul,
>
> I'm not getting any output from the Odroid serial port, even from
> u-boot.bin. How can I tell if the issue is from u-boot.bin or after? Also,
If you don't get output from u-boot it's a u-boot or a physical config problem
> has the initial-setup issue fixed and is it available in the current image
> download for the F26 spins?
No, we don't respin images once they've gone GA, it will be in F-27
> Stewart
>
>
> On 08/09/2017 12:57 PM, Paul Whalen wrote:
>> Hi Stewart,
>>
>> ----- Original Message -----
>>> Hello Andreas,
>>>
>>> I have been away for awhile as my wife and I relocated from the East
>>> Coast of the U.S. to Oregon. Now that we are settling in a bit, I am
>>> once again finding some time to work on my Odroid XU4.
>>>
>>> I hope all is well with you. I see you have been working hard on trying
>>> to get the Odroid working with Fedora 26.
>> I tested the Arndale (Exynos 5250) with F26 GA, there was an issue with
>> initial-setup (missing serial console ttySAC2), but otherwise it worked
>> quite well. Its not the same board, but the kernel *should* work.
>>
>>> I have been periodically trying new versions of Fedora since Fedora 24
>>> kernel 4.6.5-300.fc24, including Fedora 26. Something broke after the
>>> 4.6.5-300.fc24 release. I cannot tell if the problem lies in the newer
>>> u-boot.bin or elsewhere. After the system got broken, I no longer get
>>> any output though the serial cable to determine where such problems
>>> lie. However, if I install the Hardkernel Ubuntu Mate with 4.9 kernel,
>>> everything works fine. I get output through the serial cable and the
>>> system boots up beautifully.
>>>
>>> is it possible for you to email me a zipped copy of the u-boot.bin file
>>> you are using to boot? Is it the 4.6.5-300.fc24 version?
>>>
>>> Thanks.
>>>
>>> Kind regards,
>>> Stewart
>>>
>>>
>>> On 07/25/2017 12:17 AM, arm_ml(a)rirasoft.de wrote:
>>>> Hi there,
>>>>
>>>> I've managed to get Fedora 26 run with kernel 4.6.5-300.fc24.armv7hl
>>>> on Odroid-XU4 with Cloudshell 2. The onbord RAID 1 (USB-Attached SCSI
>>>> (UAS)) is working with kernel 4.6.5-300.fc24.
>>>>
>>>>
>>>> [root@myodroid ~]# lsusb -d 152d:0561
>>>> Bus 004 Device 003: ID 152d:0561 JMicron Technology Corp. / JMicron
>>>> USA Technology Corp.
>>>> [root@myodroid ~]#
>>>>
>>>> Next steps to do:
>>>>
>>>> - move OS from SD-Card to more faster eMMC-Card. How to do it?
>>>> - Kernel update to actual version. I've update Kernel to
>>>> 4.11.11-300.fc26 and system boots with 8 CPU (FC24 = 5 CPU), but only
>>>> the first part of kernel is booting; then it stops.
>>>> - compiling modules to activate the color LCD
>>>>
>>>> Is there anybody who can help me with the first 2 steps ?
>>>>
>>>>
>>>> Thanks
>>>> Andreas
>>>> _______________________________________________
>>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>> _______________________________________________
>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
6:14 a.m.
Am , schrieb Stewart Samuels:
Ok. The u-boot issue was my mistake. I was trying to use the
/usr/share/uboot/odroid u-boot files instead of the
/usr/share/uboot/odroid-xu3 files. Now I am getting output to the
serial console and the system begins the boot process as expected.
However, it hangs in the kernel seemingly trying to do something with
the network. Anyone have any ideas as to what I can try to get past
this? Following is my serial console output:
U-Boot 2017.05 (Jun 24 2017 - 16:40:39 +0000) for ODROID-XU3
CPU: Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type: xu4
DRAM: 2 GiB
MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
mmc_init: -5, time 4
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
513 bytes read in 15 ms (33.2 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command: autoboot
Ignoring malformed menu command: hidden
Ignoring unknown command: totaltimeout
Fedora-Mate-armhfp-26-1.5 Boot Options.
1: Fedora-Mate-armhfp-26-1.5 (4.11.8-300.fc26.armv7hl)
Enter choice: 1: Fedora-Mate-armhfp-26-1.5
(4.11.8-300.fc26.armv7hl)
Retrieving file: /initramfs-4.11.8-300.fc26.armv7hl.img
55227208 bytes read in 15615 ms (3.4 MiB/s)
Retrieving file: /vmlinuz-4.11.8-300.fc26.armv7hl
6267616 bytes read in 503 ms (11.9 MiB/s)
append: ro root=UUID=01a7a7b0-fb7b-4b87-a2b4-c330daaab202 cma=192MB
Retrieving file: /dtb-4.11.8-300.fc26.armv7hl/exynos5422-odroidxu4.dtb
54941 bytes read in 277 ms (193.4 KiB/s)
Kernel image @ 0x42000000 [ 0x000000 - 0x5fa2e0 ]
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Ramdisk to 4cb54000, end 4ffff348 ... OK
Loading Device Tree to 4cb43000, end 4cb5369c ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x100
[ 0.000000] Linux version 4.11.8-300.fc26.armv7hl
(mockbuild(a)buildvm-armv7-13.arm.fedoraproject.org) (gcc version 7.1.1
20177
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created DMA memory pool at 0xbe200000,
size 8 MiB
[ 0.000000] OF: reserved mem: initialized node region_mfc_right,
compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0xbbe00000,
size 36 MiB
[ 0.000000] OF: reserved mem: initialized node region_mfc_left,
compatible id shared-dma-pool
[ 0.000000] cma: Reserved 192 MiB at 0xafc00000
[ 0.000000] Samsung CPU ID: 0xe5422001
[ 0.000000] Running under secure firmware.
[ 0.000000] percpu: Embedded 15 pages/cpu @eede0000 s31628 r8192
d21620 u61440
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 505664
[ 0.000000] Kernel command line: ro
root=UUID=01a7a7b0-fb7b-4b87-a2b4-c330daaab202 cma=192MB
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Memory: 1744476K/2029568K available (7440K kernel code,
1301K rwdata, 3528K rodata, 2048K init, 518K bss, 88484K)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0a4408c (8433 kB)
[ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB)
[ 0.000000] .data : 0xc1000000 - 0xc1145584 (1302 kB)
[ 0.000000] .bss : 0xc1145584 - 0xc11c7160 ( 519 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32,
nr_cpu_ids=8
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] GIC physical location is 0x10481000
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps
every 89478484971ns
[ 0.007592] Console: colour dummy device 80x30
[ 0.008712] console [tty0] enabled
[ 0.008774] Calibrating delay loop (skipped), value calculated
using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.008835] pid_max: default: 32768 minimum: 301
[ 0.009324] Security Framework initialized
[ 0.009362] Yama: becoming mindful.
[ 0.009409] SELinux: Initializing.
[ 0.009826] Mount-cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.009866] Mountpoint-cache hash table entries: 2048 (order: 1,
8192 bytes)
[ 0.011164] CPU: Testing write buffer coherency: ok
[ 0.011237] ftrace: allocating 31692 entries in 62 pages
[ 0.090881] CPU0: update cpu_capacity 448
[ 0.090931] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.091688] Setting up static identity map for 0x40300000 -
0x40300098
[ 0.092453] ARM CCI driver probed
[ 0.092684] Exynos MCPM support installed
[ 0.101287] EFI services will not be available.
[ 0.102007] smp: Bringing up secondary CPUs ...
[ 0.103098] CPU1: update cpu_capacity 448
[ 0.103106] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.104253] CPU2: update cpu_capacity 448
[ 0.104261] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.105393] CPU3: update cpu_capacity 448
[ 0.105401] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[ 0.106573] CPU4: update cpu_capacity 1535
[ 0.106582] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.107833] CPU5: update cpu_capacity 1535
[ 0.107841] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.109009] CPU6: update cpu_capacity 1535
[ 0.109017] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.110172] CPU7: update cpu_capacity 1535
[ 0.110180] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.110322] smp: Brought up 1 node, 8 CPUs
[ 0.110632] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[ 0.110660] CPU: WARNING: CPU(s) started in wrong/inconsistent
modes (primary CPU mode 0x1a)
[ 0.110698] CPU: This may indicate a broken bootloader or firmware.
[ 0.113438] devtmpfs: initialized
[ 0.136806] VFP support v0.3: implementor 41 architecture 2 part 30
variant 7 rev 3
[ 0.137402] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.137466] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.149460] pinctrl core: initialized pinctrl subsystem
[ 0.153109] NET: Registered protocol family 16
[ 0.155535] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.160694] cpuidle: using governor menu
[ 0.161950] No ATAGs?
[ 0.162295] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
watchpoint registers.
[ 0.162357] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.164179] Serial: AMBA PL011 UART driver
[ 0.169405] random: fast init done
[ 0.201022] EXYNOS5420 PMU initialized
[ 0.243665] vgaarb: loaded
[ 0.244725] SCSI subsystem initialized
[ 0.245461] usbcore: registered new interface driver usbfs
[ 0.245582] usbcore: registered new interface driver hub
[ 0.245794] usbcore: registered new device driver usb
[ 0.248255] NetLabel: Initializing
[ 0.248292] NetLabel: domain hash size = 128
[ 0.248316] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.248417] NetLabel: unlabeled traffic allowed by default
[ 0.248930] clocksource: Switched to clocksource mct-frc
[ 0.351833] VFS: Disk quotas dquot_6.6.0
[ 0.352046] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.371166] NET: Registered protocol family 2
[ 0.372401] TCP established hash table entries: 8192 (order: 3,
32768 bytes)
[ 0.372542] TCP bind hash table entries: 8192 (order: 4, 65536
bytes)
[ 0.372744] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.373056] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.373130] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.373721] NET: Registered protocol family 1
[ 0.374567] Unpacking initramfs...
[ 4.807852] Freeing initrd memory: 53936K
[ 4.887021] audit: initializing netlink subsys (disabled)
[ 4.887254] audit: type=2000 audit(4.831:1): state=initialized
audit_enabled=0 res=1
[ 4.887633] Initialise system trusted keyrings
[ 4.887849] workingset: timestamp_bits=14 max_order=19
bucket_order=5
[ 4.895726] zbud: loaded
[ 5.191665] NET: Registered protocol family 38
[ 5.191703] Key type asymmetric registered
[ 5.191726] Asymmetric key parser 'x509' registered
[ 5.191813] bounce: pool size: 64 pages
[ 5.191908] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 250)
[ 5.192213] io scheduler noop registered
[ 5.192237] io scheduler deadline registered
[ 5.192640] io scheduler cfq registered (default)
[ 5.192665] io scheduler mq-deadline registered
[ 5.193307] atomic64_test: passed
[ 5.217683] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 5.227351] Serial: AMBA driver
[ 5.227636] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58,
base_baud = 0) is a S3C6400/10
[ 5.228075] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59,
base_baud = 0) is a S3C6400/10
[ 5.228459] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60,
base_baud = 0) is a S3C6400/10
[ 5.985336] console [ttySAC2] enabled
[ 5.989406] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61,
base_baud = 0) is a S3C6400/10
[ 5.999986] msm_serial: driver initialized
[ 6.003018] STMicroelectronics ASC driver initialized
[ 6.012392] libphy: Fixed MDIO Bus: probed
[ 6.015806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 6.021609] ehci-pci: EHCI PCI platform driver
[ 6.026067] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.032152] ohci-pci: OHCI PCI platform driver
[ 6.036611] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.043252] usbcore: registered new interface driver usbserial
[ 6.048747] usbcore: registered new interface driver
usbserial_generic
[ 6.055243] usbserial: USB Serial support registered for generic
[ 6.061441] mousedev: PS/2 mouse device common for all mice
[ 6.074583] device-mapper: uevent: version 1.0.3
[ 6.078438] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
initialised: dm-devel(a)redhat.com
[ 6.089235] ledtrig-cpu: registered to indicate activity on CPUs
[ 6.094218] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.099403] usbcore: registered new interface driver usbhid
[ 6.104724] usbhid: USB HID core driver
[ 6.111414] drop_monitor: Initializing network drop monitor service
[ 6.116525] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.121784] Initializing XFRM netlink socket
[ 6.126613] NET: Registered protocol family 10
Hello Stewart,
I'm at the same step, even with kernel 4.13 from Rawhide. No kernel
after 4.6.5-300.fc24 is working.
After this I tried to get a fresh install of F26 with
"fedora-arm-installer --target=none" and afterwards writing u-boot with
sd_fusing.1M.sh = No chance, System didn't boot.
Something goes wrong.
Andreas
9:14 a.m.
On 08/16/2017 04:14 AM, arm_ml(a)rirasoft.de wrote:
Am , schrieb Stewart Samuels:
> Ok. The u-boot issue was my mistake. I was trying to use the
> /usr/share/uboot/odroid u-boot files instead of the
> /usr/share/uboot/odroid-xu3 files. Now I am getting output to the
> serial console and the system begins the boot process as expected.
> However, it hangs in the kernel seemingly trying to do something with
> the network. Anyone have any ideas as to what I can try to get past
> this? Following is my serial console output:
>
>
>
> U-Boot 2017.05 (Jun 24 2017 - 16:40:39 +0000) for ODROID-XU3
>
> CPU: Exynos5422 @ 800 MHz
> Model: Odroid XU3 based on EXYNOS5422
> Board: Odroid XU3 based on EXYNOS5422
> Type: xu4
> DRAM: 2 GiB
> MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
> *** Warning - bad CRC, using default environment
>
> In: serial
> Out: serial
> Err: serial
> Net: No ethernet found.
> Hit any key to stop autoboot: 0
> mmc_init: -5, time 4
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:2...
> Found /extlinux/extlinux.conf
> Retrieving file: /extlinux/extlinux.conf
> 513 bytes read in 15 ms (33.2 KiB/s)
> Ignoring unknown command: ui
> Ignoring malformed menu command: autoboot
> Ignoring malformed menu command: hidden
> Ignoring unknown command: totaltimeout
> Fedora-Mate-armhfp-26-1.5 Boot Options.
> 1: Fedora-Mate-armhfp-26-1.5 (4.11.8-300.fc26.armv7hl)
> Enter choice: 1: Fedora-Mate-armhfp-26-1.5
> (4.11.8-300.fc26.armv7hl)
> Retrieving file: /initramfs-4.11.8-300.fc26.armv7hl.img
> 55227208 bytes read in 15615 ms (3.4 MiB/s)
> Retrieving file: /vmlinuz-4.11.8-300.fc26.armv7hl
> 6267616 bytes read in 503 ms (11.9 MiB/s)
> append: ro root=UUID=01a7a7b0-fb7b-4b87-a2b4-c330daaab202 cma=192MB
> Retrieving file: /dtb-4.11.8-300.fc26.armv7hl/exynos5422-odroidxu4.dtb
> 54941 bytes read in 277 ms (193.4 KiB/s)
> Kernel image @ 0x42000000 [ 0x000000 - 0x5fa2e0 ]
> ## Flattened Device Tree blob at 43000000
> Booting using the fdt blob at 0x43000000
> Loading Ramdisk to 4cb54000, end 4ffff348 ... OK
> Loading Device Tree to 4cb43000, end 4cb5369c ... OK
>
> Starting kernel ...
>
> [ 0.000000] Booting Linux on physical CPU 0x100
> [ 0.000000] Linux version 4.11.8-300.fc26.armv7hl
> (mockbuild(a)buildvm-armv7-13.arm.fedoraproject.org) (gcc version 7.1.1
> 20177
> [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7),
> cr=10c5387d
> [ 0.000000] CPU: div instructions available: patching division code
> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
> instruction cache
> [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
> [ 0.000000] Memory policy: Data cache writealloc
> [ 0.000000] efi: Getting EFI parameters from FDT:
> [ 0.000000] efi: UEFI not found.
> [ 0.000000] Reserved memory: created DMA memory pool at 0xbe200000,
> size 8 MiB
> [ 0.000000] OF: reserved mem: initialized node region_mfc_right,
> compatible id shared-dma-pool
> [ 0.000000] Reserved memory: created DMA memory pool at 0xbbe00000,
> size 36 MiB
> [ 0.000000] OF: reserved mem: initialized node region_mfc_left,
> compatible id shared-dma-pool
> [ 0.000000] cma: Reserved 192 MiB at 0xafc00000
> [ 0.000000] Samsung CPU ID: 0xe5422001
> [ 0.000000] Running under secure firmware.
> [ 0.000000] percpu: Embedded 15 pages/cpu @eede0000 s31628 r8192
> d21620 u61440
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 505664
> [ 0.000000] Kernel command line: ro
> root=UUID=01a7a7b0-fb7b-4b87-a2b4-c330daaab202 cma=192MB
> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7,
> 524288 bytes)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6,
> 262144 bytes)
> [ 0.000000] Memory: 1744476K/2029568K available (7440K kernel code,
> 1301K rwdata, 3528K rodata, 2048K init, 518K bss, 88484K)
> [ 0.000000] Virtual kernel memory layout:
> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
> [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
> [ 0.000000] .text : 0xc0208000 - 0xc0a4408c (8433 kB)
> [ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB)
> [ 0.000000] .data : 0xc1000000 - 0xc1145584 (1302 kB)
> [ 0.000000] .bss : 0xc1145584 - 0xc11c7160 ( 519 kB)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8,
> Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] Build-time adjustment of leaf fanout to 32.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32,
> nr_cpu_ids=8
> [ 0.000000] NR_IRQS:16 nr_irqs:16 16
> [ 0.000000] GIC: Using split EOI/Deactivate mode
> [ 0.000000] GIC physical location is 0x10481000
> [ 0.000000] Switching to timer-based delay loop, resolution 41ns
> [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 79635851949 ns
> [ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps
> every 89478484971ns
> [ 0.007592] Console: colour dummy device 80x30
> [ 0.008712] console [tty0] enabled
> [ 0.008774] Calibrating delay loop (skipped), value calculated
> using timer frequency.. 48.00 BogoMIPS (lpj=24000)
> [ 0.008835] pid_max: default: 32768 minimum: 301
> [ 0.009324] Security Framework initialized
> [ 0.009362] Yama: becoming mindful.
> [ 0.009409] SELinux: Initializing.
> [ 0.009826] Mount-cache hash table entries: 2048 (order: 1, 8192
> bytes)
> [ 0.009866] Mountpoint-cache hash table entries: 2048 (order: 1,
> 8192 bytes)
> [ 0.011164] CPU: Testing write buffer coherency: ok
> [ 0.011237] ftrace: allocating 31692 entries in 62 pages
> [ 0.090881] CPU0: update cpu_capacity 448
> [ 0.090931] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
> [ 0.091688] Setting up static identity map for 0x40300000 -
> 0x40300098
> [ 0.092453] ARM CCI driver probed
> [ 0.092684] Exynos MCPM support installed
> [ 0.101287] EFI services will not be available.
> [ 0.102007] smp: Bringing up secondary CPUs ...
> [ 0.103098] CPU1: update cpu_capacity 448
> [ 0.103106] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
> [ 0.104253] CPU2: update cpu_capacity 448
> [ 0.104261] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
> [ 0.105393] CPU3: update cpu_capacity 448
> [ 0.105401] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
> [ 0.106573] CPU4: update cpu_capacity 1535
> [ 0.106582] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
> [ 0.107833] CPU5: update cpu_capacity 1535
> [ 0.107841] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
> [ 0.109009] CPU6: update cpu_capacity 1535
> [ 0.109017] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
> [ 0.110172] CPU7: update cpu_capacity 1535
> [ 0.110180] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
> [ 0.110322] smp: Brought up 1 node, 8 CPUs
> [ 0.110632] SMP: Total of 8 processors activated (384.00 BogoMIPS).
> [ 0.110660] CPU: WARNING: CPU(s) started in wrong/inconsistent
> modes (primary CPU mode 0x1a)
> [ 0.110698] CPU: This may indicate a broken bootloader or firmware.
> [ 0.113438] devtmpfs: initialized
> [ 0.136806] VFP support v0.3: implementor 41 architecture 2 part 30
> variant 7 rev 3
> [ 0.137402] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 1911260446275000 ns
> [ 0.137466] futex hash table entries: 2048 (order: 5, 131072 bytes)
> [ 0.149460] pinctrl core: initialized pinctrl subsystem
> [ 0.153109] NET: Registered protocol family 16
> [ 0.155535] DMA: preallocated 256 KiB pool for atomic coherent
> allocations
> [ 0.160694] cpuidle: using governor menu
> [ 0.161950] No ATAGs?
> [ 0.162295] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
> watchpoint registers.
> [ 0.162357] hw-breakpoint: maximum watchpoint size is 8 bytes.
> [ 0.164179] Serial: AMBA PL011 UART driver
> [ 0.169405] random: fast init done
> [ 0.201022] EXYNOS5420 PMU initialized
> [ 0.243665] vgaarb: loaded
> [ 0.244725] SCSI subsystem initialized
> [ 0.245461] usbcore: registered new interface driver usbfs
> [ 0.245582] usbcore: registered new interface driver hub
> [ 0.245794] usbcore: registered new device driver usb
> [ 0.248255] NetLabel: Initializing
> [ 0.248292] NetLabel: domain hash size = 128
> [ 0.248316] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
> [ 0.248417] NetLabel: unlabeled traffic allowed by default
> [ 0.248930] clocksource: Switched to clocksource mct-frc
> [ 0.351833] VFS: Disk quotas dquot_6.6.0
> [ 0.352046] VFS: Dquot-cache hash table entries: 1024 (order 0,
> 4096 bytes)
> [ 0.371166] NET: Registered protocol family 2
> [ 0.372401] TCP established hash table entries: 8192 (order: 3,
> 32768 bytes)
> [ 0.372542] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
> [ 0.372744] TCP: Hash tables configured (established 8192 bind 8192)
> [ 0.373056] UDP hash table entries: 512 (order: 2, 16384 bytes)
> [ 0.373130] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
> [ 0.373721] NET: Registered protocol family 1
> [ 0.374567] Unpacking initramfs...
> [ 4.807852] Freeing initrd memory: 53936K
> [ 4.887021] audit: initializing netlink subsys (disabled)
> [ 4.887254] audit: type=2000 audit(4.831:1): state=initialized
> audit_enabled=0 res=1
> [ 4.887633] Initialise system trusted keyrings
> [ 4.887849] workingset: timestamp_bits=14 max_order=19 bucket_order=5
> [ 4.895726] zbud: loaded
> [ 5.191665] NET: Registered protocol family 38
> [ 5.191703] Key type asymmetric registered
> [ 5.191726] Asymmetric key parser 'x509' registered
> [ 5.191813] bounce: pool size: 64 pages
> [ 5.191908] Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 250)
> [ 5.192213] io scheduler noop registered
> [ 5.192237] io scheduler deadline registered
> [ 5.192640] io scheduler cfq registered (default)
> [ 5.192665] io scheduler mq-deadline registered
> [ 5.193307] atomic64_test: passed
> [ 5.217683] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [ 5.227351] Serial: AMBA driver
> [ 5.227636] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58,
> base_baud = 0) is a S3C6400/10
> [ 5.228075] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59,
> base_baud = 0) is a S3C6400/10
> [ 5.228459] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60,
> base_baud = 0) is a S3C6400/10
> [ 5.985336] console [ttySAC2] enabled
> [ 5.989406] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61,
> base_baud = 0) is a S3C6400/10
> [ 5.999986] msm_serial: driver initialized
> [ 6.003018] STMicroelectronics ASC driver initialized
> [ 6.012392] libphy: Fixed MDIO Bus: probed
> [ 6.015806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> [ 6.021609] ehci-pci: EHCI PCI platform driver
> [ 6.026067] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 6.032152] ohci-pci: OHCI PCI platform driver
> [ 6.036611] uhci_hcd: USB Universal Host Controller Interface driver
> [ 6.043252] usbcore: registered new interface driver usbserial
> [ 6.048747] usbcore: registered new interface driver
> usbserial_generic
> [ 6.055243] usbserial: USB Serial support registered for generic
> [ 6.061441] mousedev: PS/2 mouse device common for all mice
> [ 6.074583] device-mapper: uevent: version 1.0.3
> [ 6.078438] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
> initialised: dm-devel(a)redhat.com
> [ 6.089235] ledtrig-cpu: registered to indicate activity on CPUs
> [ 6.094218] hidraw: raw HID events driver (C) Jiri Kosina
> [ 6.099403] usbcore: registered new interface driver usbhid
> [ 6.104724] usbhid: USB HID core driver
> [ 6.111414] drop_monitor: Initializing network drop monitor service
> [ 6.116525] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 6.121784] Initializing XFRM netlink socket
> [ 6.126613] NET: Registered protocol family 10
>
Hello Stewart,
I'm at the same step, even with kernel 4.13 from Rawhide. No kernel
after 4.6.5-300.fc24 is working.
After this I tried to get a fresh install of F26 with
"fedora-arm-installer --target=none" and afterwards writing u-boot
with sd_fusing.1M.sh = No chance, System didn't boot.
Something goes wrong.
Andreas
After looking at the serial output from the Ubuntu boot, it would appear
that what follows (and where Fedora 26 is getting hung up) is when the
initramfs kernel is looking to mount the root partition and then init
all other processes. My suspicion is that dracut is still not working
correctly, as I have updated the root UUID in extlinux.conf as well as
all UUIDs in /etc/fstab. If dracut fails to build a good initramfs, it
doesn't matter what revision of u-boot or the kernel we try to use. On
boot up, the system always fails to find the root partition to mount.
Can anyone confirm my thoughts (findings)? Does anyone have a work
around to try?
Stewart
9:53 a.m.
On Wed, Aug 16, 2017 at 3:14 PM, Stewart Samuels <searider74(a)gmail.com> wrote:
On 08/16/2017 04:14 AM, arm_ml(a)rirasoft.de wrote:
>
> Am , schrieb Stewart Samuels:
>>
>> Ok. The u-boot issue was my mistake. I was trying to use the
>> /usr/share/uboot/odroid u-boot files instead of the
>> /usr/share/uboot/odroid-xu3 files. Now I am getting output to the
>> serial console and the system begins the boot process as expected.
>> However, it hangs in the kernel seemingly trying to do something with
>> the network. Anyone have any ideas as to what I can try to get past
>> this? Following is my serial console output:
>>
>>
>>
>> U-Boot 2017.05 (Jun 24 2017 - 16:40:39 +0000) for ODROID-XU3
>>
>> CPU: Exynos5422 @ 800 MHz
>> Model: Odroid XU3 based on EXYNOS5422
>> Board: Odroid XU3 based on EXYNOS5422
>> Type: xu4
>> DRAM: 2 GiB
>> MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
>> *** Warning - bad CRC, using default environment
>>
>> In: serial
>> Out: serial
>> Err: serial
>> Net: No ethernet found.
>> Hit any key to stop autoboot: 0
>> mmc_init: -5, time 4
>> switch to partitions #0, OK
>> mmc0 is current device
>> Scanning mmc 0:2...
>> Found /extlinux/extlinux.conf
>> Retrieving file: /extlinux/extlinux.conf
>> 513 bytes read in 15 ms (33.2 KiB/s)
>> Ignoring unknown command: ui
>> Ignoring malformed menu command: autoboot
>> Ignoring malformed menu command: hidden
>> Ignoring unknown command: totaltimeout
>> Fedora-Mate-armhfp-26-1.5 Boot Options.
>> 1: Fedora-Mate-armhfp-26-1.5 (4.11.8-300.fc26.armv7hl)
>> Enter choice: 1: Fedora-Mate-armhfp-26-1.5
>> (4.11.8-300.fc26.armv7hl)
>> Retrieving file: /initramfs-4.11.8-300.fc26.armv7hl.img
>> 55227208 bytes read in 15615 ms (3.4 MiB/s)
>> Retrieving file: /vmlinuz-4.11.8-300.fc26.armv7hl
>> 6267616 bytes read in 503 ms (11.9 MiB/s)
>> append: ro root=UUID=01a7a7b0-fb7b-4b87-a2b4-c330daaab202 cma=192MB
>> Retrieving file: /dtb-4.11.8-300.fc26.armv7hl/exynos5422-odroidxu4.dtb
>> 54941 bytes read in 277 ms (193.4 KiB/s)
>> Kernel image @ 0x42000000 [ 0x000000 - 0x5fa2e0 ]
>> ## Flattened Device Tree blob at 43000000
>> Booting using the fdt blob at 0x43000000
>> Loading Ramdisk to 4cb54000, end 4ffff348 ... OK
>> Loading Device Tree to 4cb43000, end 4cb5369c ... OK
>>
>> Starting kernel ...
>>
>> [ 0.000000] Booting Linux on physical CPU 0x100
>> [ 0.000000] Linux version 4.11.8-300.fc26.armv7hl
>> (mockbuild(a)buildvm-armv7-13.arm.fedoraproject.org) (gcc version 7.1.1
>> 20177
>> [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7),
>> cr=10c5387d
>> [ 0.000000] CPU: div instructions available: patching division code
>> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
>> instruction cache
>> [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
>> [ 0.000000] Memory policy: Data cache writealloc
>> [ 0.000000] efi: Getting EFI parameters from FDT:
>> [ 0.000000] efi: UEFI not found.
>> [ 0.000000] Reserved memory: created DMA memory pool at 0xbe200000,
>> size 8 MiB
>> [ 0.000000] OF: reserved mem: initialized node region_mfc_right,
>> compatible id shared-dma-pool
>> [ 0.000000] Reserved memory: created DMA memory pool at 0xbbe00000,
>> size 36 MiB
>> [ 0.000000] OF: reserved mem: initialized node region_mfc_left,
>> compatible id shared-dma-pool
>> [ 0.000000] cma: Reserved 192 MiB at 0xafc00000
>> [ 0.000000] Samsung CPU ID: 0xe5422001
>> [ 0.000000] Running under secure firmware.
>> [ 0.000000] percpu: Embedded 15 pages/cpu @eede0000 s31628 r8192
>> d21620 u61440
>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
>> Total pages: 505664
>> [ 0.000000] Kernel command line: ro
>> root=UUID=01a7a7b0-fb7b-4b87-a2b4-c330daaab202 cma=192MB
>> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
>> bytes)
>> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
>> bytes)
>> [ 0.000000] Memory: 1744476K/2029568K available (7440K kernel code,
>> 1301K rwdata, 3528K rodata, 2048K init, 518K bss, 88484K)
>> [ 0.000000] Virtual kernel memory layout:
>> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
>> [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
>> [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
>> [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
>> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
>> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
>> [ 0.000000] .text : 0xc0208000 - 0xc0a4408c (8433 kB)
>> [ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB)
>> [ 0.000000] .data : 0xc1000000 - 0xc1145584 (1302 kB)
>> [ 0.000000] .bss : 0xc1145584 - 0xc11c7160 ( 519 kB)
>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>> [ 0.000000] Hierarchical RCU implementation.
>> [ 0.000000] Build-time adjustment of leaf fanout to 32.
>> [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
>> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32,
>> nr_cpu_ids=8
>> [ 0.000000] NR_IRQS:16 nr_irqs:16 16
>> [ 0.000000] GIC: Using split EOI/Deactivate mode
>> [ 0.000000] GIC physical location is 0x10481000
>> [ 0.000000] Switching to timer-based delay loop, resolution 41ns
>> [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles:
>> 0xffffffff, max_idle_ns: 79635851949 ns
>> [ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps
>> every 89478484971ns
>> [ 0.007592] Console: colour dummy device 80x30
>> [ 0.008712] console [tty0] enabled
>> [ 0.008774] Calibrating delay loop (skipped), value calculated
>> using timer frequency.. 48.00 BogoMIPS (lpj=24000)
>> [ 0.008835] pid_max: default: 32768 minimum: 301
>> [ 0.009324] Security Framework initialized
>> [ 0.009362] Yama: becoming mindful.
>> [ 0.009409] SELinux: Initializing.
>> [ 0.009826] Mount-cache hash table entries: 2048 (order: 1, 8192
>> bytes)
>> [ 0.009866] Mountpoint-cache hash table entries: 2048 (order: 1, 8192
>> bytes)
>> [ 0.011164] CPU: Testing write buffer coherency: ok
>> [ 0.011237] ftrace: allocating 31692 entries in 62 pages
>> [ 0.090881] CPU0: update cpu_capacity 448
>> [ 0.090931] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
>> [ 0.091688] Setting up static identity map for 0x40300000 - 0x40300098
>> [ 0.092453] ARM CCI driver probed
>> [ 0.092684] Exynos MCPM support installed
>> [ 0.101287] EFI services will not be available.
>> [ 0.102007] smp: Bringing up secondary CPUs ...
>> [ 0.103098] CPU1: update cpu_capacity 448
>> [ 0.103106] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
>> [ 0.104253] CPU2: update cpu_capacity 448
>> [ 0.104261] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
>> [ 0.105393] CPU3: update cpu_capacity 448
>> [ 0.105401] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
>> [ 0.106573] CPU4: update cpu_capacity 1535
>> [ 0.106582] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
>> [ 0.107833] CPU5: update cpu_capacity 1535
>> [ 0.107841] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
>> [ 0.109009] CPU6: update cpu_capacity 1535
>> [ 0.109017] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
>> [ 0.110172] CPU7: update cpu_capacity 1535
>> [ 0.110180] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
>> [ 0.110322] smp: Brought up 1 node, 8 CPUs
>> [ 0.110632] SMP: Total of 8 processors activated (384.00 BogoMIPS).
>> [ 0.110660] CPU: WARNING: CPU(s) started in wrong/inconsistent
>> modes (primary CPU mode 0x1a)
>> [ 0.110698] CPU: This may indicate a broken bootloader or firmware.
>> [ 0.113438] devtmpfs: initialized
>> [ 0.136806] VFP support v0.3: implementor 41 architecture 2 part 30
>> variant 7 rev 3
>> [ 0.137402] clocksource: jiffies: mask: 0xffffffff max_cycles:
>> 0xffffffff, max_idle_ns: 1911260446275000 ns
>> [ 0.137466] futex hash table entries: 2048 (order: 5, 131072 bytes)
>> [ 0.149460] pinctrl core: initialized pinctrl subsystem
>> [ 0.153109] NET: Registered protocol family 16
>> [ 0.155535] DMA: preallocated 256 KiB pool for atomic coherent
>> allocations
>> [ 0.160694] cpuidle: using governor menu
>> [ 0.161950] No ATAGs?
>> [ 0.162295] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
>> watchpoint registers.
>> [ 0.162357] hw-breakpoint: maximum watchpoint size is 8 bytes.
>> [ 0.164179] Serial: AMBA PL011 UART driver
>> [ 0.169405] random: fast init done
>> [ 0.201022] EXYNOS5420 PMU initialized
>> [ 0.243665] vgaarb: loaded
>> [ 0.244725] SCSI subsystem initialized
>> [ 0.245461] usbcore: registered new interface driver usbfs
>> [ 0.245582] usbcore: registered new interface driver hub
>> [ 0.245794] usbcore: registered new device driver usb
>> [ 0.248255] NetLabel: Initializing
>> [ 0.248292] NetLabel: domain hash size = 128
>> [ 0.248316] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
>> [ 0.248417] NetLabel: unlabeled traffic allowed by default
>> [ 0.248930] clocksource: Switched to clocksource mct-frc
>> [ 0.351833] VFS: Disk quotas dquot_6.6.0
>> [ 0.352046] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
>> bytes)
>> [ 0.371166] NET: Registered protocol family 2
>> [ 0.372401] TCP established hash table entries: 8192 (order: 3, 32768
>> bytes)
>> [ 0.372542] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>> [ 0.372744] TCP: Hash tables configured (established 8192 bind 8192)
>> [ 0.373056] UDP hash table entries: 512 (order: 2, 16384 bytes)
>> [ 0.373130] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>> [ 0.373721] NET: Registered protocol family 1
>> [ 0.374567] Unpacking initramfs...
>> [ 4.807852] Freeing initrd memory: 53936K
>> [ 4.887021] audit: initializing netlink subsys (disabled)
>> [ 4.887254] audit: type=2000 audit(4.831:1): state=initialized
>> audit_enabled=0 res=1
>> [ 4.887633] Initialise system trusted keyrings
>> [ 4.887849] workingset: timestamp_bits=14 max_order=19 bucket_order=5
>> [ 4.895726] zbud: loaded
>> [ 5.191665] NET: Registered protocol family 38
>> [ 5.191703] Key type asymmetric registered
>> [ 5.191726] Asymmetric key parser 'x509' registered
>> [ 5.191813] bounce: pool size: 64 pages
>> [ 5.191908] Block layer SCSI generic (bsg) driver version 0.4
>> loaded (major 250)
>> [ 5.192213] io scheduler noop registered
>> [ 5.192237] io scheduler deadline registered
>> [ 5.192640] io scheduler cfq registered (default)
>> [ 5.192665] io scheduler mq-deadline registered
>> [ 5.193307] atomic64_test: passed
>> [ 5.217683] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>> [ 5.227351] Serial: AMBA driver
>> [ 5.227636] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58,
>> base_baud = 0) is a S3C6400/10
>> [ 5.228075] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59,
>> base_baud = 0) is a S3C6400/10
>> [ 5.228459] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60,
>> base_baud = 0) is a S3C6400/10
>> [ 5.985336] console [ttySAC2] enabled
>> [ 5.989406] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61,
>> base_baud = 0) is a S3C6400/10
>> [ 5.999986] msm_serial: driver initialized
>> [ 6.003018] STMicroelectronics ASC driver initialized
>> [ 6.012392] libphy: Fixed MDIO Bus: probed
>> [ 6.015806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
>> [ 6.021609] ehci-pci: EHCI PCI platform driver
>> [ 6.026067] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> [ 6.032152] ohci-pci: OHCI PCI platform driver
>> [ 6.036611] uhci_hcd: USB Universal Host Controller Interface driver
>> [ 6.043252] usbcore: registered new interface driver usbserial
>> [ 6.048747] usbcore: registered new interface driver usbserial_generic
>> [ 6.055243] usbserial: USB Serial support registered for generic
>> [ 6.061441] mousedev: PS/2 mouse device common for all mice
>> [ 6.074583] device-mapper: uevent: version 1.0.3
>> [ 6.078438] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
>> initialised: dm-devel(a)redhat.com
>> [ 6.089235] ledtrig-cpu: registered to indicate activity on CPUs
>> [ 6.094218] hidraw: raw HID events driver (C) Jiri Kosina
>> [ 6.099403] usbcore: registered new interface driver usbhid
>> [ 6.104724] usbhid: USB HID core driver
>> [ 6.111414] drop_monitor: Initializing network drop monitor service
>> [ 6.116525] ip_tables: (C) 2000-2006 Netfilter Core Team
>> [ 6.121784] Initializing XFRM netlink socket
>> [ 6.126613] NET: Registered protocol family 10
>>
> Hello Stewart,
>
> I'm at the same step, even with kernel 4.13 from Rawhide. No kernel after
> 4.6.5-300.fc24 is working.
> After this I tried to get a fresh install of F26 with
> "fedora-arm-installer --target=none" and afterwards writing u-boot with
> sd_fusing.1M.sh = No chance, System didn't boot.
> Something goes wrong.
>
> Andreas
After looking at the serial output from the Ubuntu boot, it would appear
that what follows (and where Fedora 26 is getting hung up) is when the
initramfs kernel is looking to mount the root partition and then init all
other processes. My suspicion is that dracut is still not working
correctly, as I have updated the root UUID in extlinux.conf as well as all
UUIDs in /etc/fstab. If dracut fails to build a good initramfs, it doesn't
matter what revision of u-boot or the kernel we try to use. On boot up, the
system always fails to find the root partition to mount.
Can anyone confirm my thoughts (findings)? Does anyone have a work around
to try?
I've had other people have luck with Exynos devices.
10:26 a.m.
On 08/16/2017 07:53 AM, Peter Robinson wrote:
On Wed, Aug 16, 2017 at 3:14 PM, Stewart Samuels
<searider74(a)gmail.com> wrote:
>
> On 08/16/2017 04:14 AM, arm_ml(a)rirasoft.de wrote:
>> Am , schrieb Stewart Samuels:
>>> Ok. The u-boot issue was my mistake. I was trying to use the
>>> /usr/share/uboot/odroid u-boot files instead of the
>>> /usr/share/uboot/odroid-xu3 files. Now I am getting output to the
>>> serial console and the system begins the boot process as expected.
>>> However, it hangs in the kernel seemingly trying to do something with
>>> the network. Anyone have any ideas as to what I can try to get past
>>> this? Following is my serial console output:
>>>
>>>
>>>
>>> U-Boot 2017.05 (Jun 24 2017 - 16:40:39 +0000) for ODROID-XU3
>>>
>>> CPU: Exynos5422 @ 800 MHz
>>> Model: Odroid XU3 based on EXYNOS5422
>>> Board: Odroid XU3 based on EXYNOS5422
>>> Type: xu4
>>> DRAM: 2 GiB
>>> MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
>>> *** Warning - bad CRC, using default environment
>>>
>>> In: serial
>>> Out: serial
>>> Err: serial
>>> Net: No ethernet found.
>>> Hit any key to stop autoboot: 0
>>> mmc_init: -5, time 4
>>> switch to partitions #0, OK
>>> mmc0 is current device
>>> Scanning mmc 0:2...
>>> Found /extlinux/extlinux.conf
>>> Retrieving file: /extlinux/extlinux.conf
>>> 513 bytes read in 15 ms (33.2 KiB/s)
>>> Ignoring unknown command: ui
>>> Ignoring malformed menu command: autoboot
>>> Ignoring malformed menu command: hidden
>>> Ignoring unknown command: totaltimeout
>>> Fedora-Mate-armhfp-26-1.5 Boot Options.
>>> 1: Fedora-Mate-armhfp-26-1.5 (4.11.8-300.fc26.armv7hl)
>>> Enter choice: 1: Fedora-Mate-armhfp-26-1.5
>>> (4.11.8-300.fc26.armv7hl)
>>> Retrieving file: /initramfs-4.11.8-300.fc26.armv7hl.img
>>> 55227208 bytes read in 15615 ms (3.4 MiB/s)
>>> Retrieving file: /vmlinuz-4.11.8-300.fc26.armv7hl
>>> 6267616 bytes read in 503 ms (11.9 MiB/s)
>>> append: ro root=UUID=01a7a7b0-fb7b-4b87-a2b4-c330daaab202 cma=192MB
>>> Retrieving file: /dtb-4.11.8-300.fc26.armv7hl/exynos5422-odroidxu4.dtb
>>> 54941 bytes read in 277 ms (193.4 KiB/s)
>>> Kernel image @ 0x42000000 [ 0x000000 - 0x5fa2e0 ]
>>> ## Flattened Device Tree blob at 43000000
>>> Booting using the fdt blob at 0x43000000
>>> Loading Ramdisk to 4cb54000, end 4ffff348 ... OK
>>> Loading Device Tree to 4cb43000, end 4cb5369c ... OK
>>>
>>> Starting kernel ...
>>>
>>> [ 0.000000] Booting Linux on physical CPU 0x100
>>> [ 0.000000] Linux version 4.11.8-300.fc26.armv7hl
>>> (mockbuild(a)buildvm-armv7-13.arm.fedoraproject.org) (gcc version 7.1.1
>>> 20177
>>> [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7),
>>> cr=10c5387d
>>> [ 0.000000] CPU: div instructions available: patching division code
>>> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
>>> instruction cache
>>> [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
>>> [ 0.000000] Memory policy: Data cache writealloc
>>> [ 0.000000] efi: Getting EFI parameters from FDT:
>>> [ 0.000000] efi: UEFI not found.
>>> [ 0.000000] Reserved memory: created DMA memory pool at 0xbe200000,
>>> size 8 MiB
>>> [ 0.000000] OF: reserved mem: initialized node region_mfc_right,
>>> compatible id shared-dma-pool
>>> [ 0.000000] Reserved memory: created DMA memory pool at 0xbbe00000,
>>> size 36 MiB
>>> [ 0.000000] OF: reserved mem: initialized node region_mfc_left,
>>> compatible id shared-dma-pool
>>> [ 0.000000] cma: Reserved 192 MiB at 0xafc00000
>>> [ 0.000000] Samsung CPU ID: 0xe5422001
>>> [ 0.000000] Running under secure firmware.
>>> [ 0.000000] percpu: Embedded 15 pages/cpu @eede0000 s31628 r8192
>>> d21620 u61440
>>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
>>> Total pages: 505664
>>> [ 0.000000] Kernel command line: ro
>>> root=UUID=01a7a7b0-fb7b-4b87-a2b4-c330daaab202 cma=192MB
>>> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>>> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
>>> bytes)
>>> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
>>> bytes)
>>> [ 0.000000] Memory: 1744476K/2029568K available (7440K kernel code,
>>> 1301K rwdata, 3528K rodata, 2048K init, 518K bss, 88484K)
>>> [ 0.000000] Virtual kernel memory layout:
>>> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
>>> [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
>>> [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
>>> [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
>>> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
>>> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
>>> [ 0.000000] .text : 0xc0208000 - 0xc0a4408c (8433 kB)
>>> [ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB)
>>> [ 0.000000] .data : 0xc1000000 - 0xc1145584 (1302 kB)
>>> [ 0.000000] .bss : 0xc1145584 - 0xc11c7160 ( 519 kB)
>>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>>> [ 0.000000] Hierarchical RCU implementation.
>>> [ 0.000000] Build-time adjustment of leaf fanout to 32.
>>> [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
>>> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32,
>>> nr_cpu_ids=8
>>> [ 0.000000] NR_IRQS:16 nr_irqs:16 16
>>> [ 0.000000] GIC: Using split EOI/Deactivate mode
>>> [ 0.000000] GIC physical location is 0x10481000
>>> [ 0.000000] Switching to timer-based delay loop, resolution 41ns
>>> [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles:
>>> 0xffffffff, max_idle_ns: 79635851949 ns
>>> [ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps
>>> every 89478484971ns
>>> [ 0.007592] Console: colour dummy device 80x30
>>> [ 0.008712] console [tty0] enabled
>>> [ 0.008774] Calibrating delay loop (skipped), value calculated
>>> using timer frequency.. 48.00 BogoMIPS (lpj=24000)
>>> [ 0.008835] pid_max: default: 32768 minimum: 301
>>> [ 0.009324] Security Framework initialized
>>> [ 0.009362] Yama: becoming mindful.
>>> [ 0.009409] SELinux: Initializing.
>>> [ 0.009826] Mount-cache hash table entries: 2048 (order: 1, 8192
>>> bytes)
>>> [ 0.009866] Mountpoint-cache hash table entries: 2048 (order: 1, 8192
>>> bytes)
>>> [ 0.011164] CPU: Testing write buffer coherency: ok
>>> [ 0.011237] ftrace: allocating 31692 entries in 62 pages
>>> [ 0.090881] CPU0: update cpu_capacity 448
>>> [ 0.090931] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
>>> [ 0.091688] Setting up static identity map for 0x40300000 - 0x40300098
>>> [ 0.092453] ARM CCI driver probed
>>> [ 0.092684] Exynos MCPM support installed
>>> [ 0.101287] EFI services will not be available.
>>> [ 0.102007] smp: Bringing up secondary CPUs ...
>>> [ 0.103098] CPU1: update cpu_capacity 448
>>> [ 0.103106] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
>>> [ 0.104253] CPU2: update cpu_capacity 448
>>> [ 0.104261] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
>>> [ 0.105393] CPU3: update cpu_capacity 448
>>> [ 0.105401] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
>>> [ 0.106573] CPU4: update cpu_capacity 1535
>>> [ 0.106582] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
>>> [ 0.107833] CPU5: update cpu_capacity 1535
>>> [ 0.107841] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
>>> [ 0.109009] CPU6: update cpu_capacity 1535
>>> [ 0.109017] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
>>> [ 0.110172] CPU7: update cpu_capacity 1535
>>> [ 0.110180] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
>>> [ 0.110322] smp: Brought up 1 node, 8 CPUs
>>> [ 0.110632] SMP: Total of 8 processors activated (384.00 BogoMIPS).
>>> [ 0.110660] CPU: WARNING: CPU(s) started in wrong/inconsistent
>>> modes (primary CPU mode 0x1a)
>>> [ 0.110698] CPU: This may indicate a broken bootloader or firmware.
>>> [ 0.113438] devtmpfs: initialized
>>> [ 0.136806] VFP support v0.3: implementor 41 architecture 2 part 30
>>> variant 7 rev 3
>>> [ 0.137402] clocksource: jiffies: mask: 0xffffffff max_cycles:
>>> 0xffffffff, max_idle_ns: 1911260446275000 ns
>>> [ 0.137466] futex hash table entries: 2048 (order: 5, 131072 bytes)
>>> [ 0.149460] pinctrl core: initialized pinctrl subsystem
>>> [ 0.153109] NET: Registered protocol family 16
>>> [ 0.155535] DMA: preallocated 256 KiB pool for atomic coherent
>>> allocations
>>> [ 0.160694] cpuidle: using governor menu
>>> [ 0.161950] No ATAGs?
>>> [ 0.162295] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
>>> watchpoint registers.
>>> [ 0.162357] hw-breakpoint: maximum watchpoint size is 8 bytes.
>>> [ 0.164179] Serial: AMBA PL011 UART driver
>>> [ 0.169405] random: fast init done
>>> [ 0.201022] EXYNOS5420 PMU initialized
>>> [ 0.243665] vgaarb: loaded
>>> [ 0.244725] SCSI subsystem initialized
>>> [ 0.245461] usbcore: registered new interface driver usbfs
>>> [ 0.245582] usbcore: registered new interface driver hub
>>> [ 0.245794] usbcore: registered new device driver usb
>>> [ 0.248255] NetLabel: Initializing
>>> [ 0.248292] NetLabel: domain hash size = 128
>>> [ 0.248316] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
>>> [ 0.248417] NetLabel: unlabeled traffic allowed by default
>>> [ 0.248930] clocksource: Switched to clocksource mct-frc
>>> [ 0.351833] VFS: Disk quotas dquot_6.6.0
>>> [ 0.352046] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
>>> bytes)
>>> [ 0.371166] NET: Registered protocol family 2
>>> [ 0.372401] TCP established hash table entries: 8192 (order: 3, 32768
>>> bytes)
>>> [ 0.372542] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>>> [ 0.372744] TCP: Hash tables configured (established 8192 bind 8192)
>>> [ 0.373056] UDP hash table entries: 512 (order: 2, 16384 bytes)
>>> [ 0.373130] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>>> [ 0.373721] NET: Registered protocol family 1
>>> [ 0.374567] Unpacking initramfs...
>>> [ 4.807852] Freeing initrd memory: 53936K
>>> [ 4.887021] audit: initializing netlink subsys (disabled)
>>> [ 4.887254] audit: type=2000 audit(4.831:1): state=initialized
>>> audit_enabled=0 res=1
>>> [ 4.887633] Initialise system trusted keyrings
>>> [ 4.887849] workingset: timestamp_bits=14 max_order=19 bucket_order=5
>>> [ 4.895726] zbud: loaded
>>> [ 5.191665] NET: Registered protocol family 38
>>> [ 5.191703] Key type asymmetric registered
>>> [ 5.191726] Asymmetric key parser 'x509' registered
>>> [ 5.191813] bounce: pool size: 64 pages
>>> [ 5.191908] Block layer SCSI generic (bsg) driver version 0.4
>>> loaded (major 250)
>>> [ 5.192213] io scheduler noop registered
>>> [ 5.192237] io scheduler deadline registered
>>> [ 5.192640] io scheduler cfq registered (default)
>>> [ 5.192665] io scheduler mq-deadline registered
>>> [ 5.193307] atomic64_test: passed
>>> [ 5.217683] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>>> [ 5.227351] Serial: AMBA driver
>>> [ 5.227636] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58,
>>> base_baud = 0) is a S3C6400/10
>>> [ 5.228075] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59,
>>> base_baud = 0) is a S3C6400/10
>>> [ 5.228459] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60,
>>> base_baud = 0) is a S3C6400/10
>>> [ 5.985336] console [ttySAC2] enabled
>>> [ 5.989406] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61,
>>> base_baud = 0) is a S3C6400/10
>>> [ 5.999986] msm_serial: driver initialized
>>> [ 6.003018] STMicroelectronics ASC driver initialized
>>> [ 6.012392] libphy: Fixed MDIO Bus: probed
>>> [ 6.015806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
>>> [ 6.021609] ehci-pci: EHCI PCI platform driver
>>> [ 6.026067] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI)
Driver
>>> [ 6.032152] ohci-pci: OHCI PCI platform driver
>>> [ 6.036611] uhci_hcd: USB Universal Host Controller Interface driver
>>> [ 6.043252] usbcore: registered new interface driver usbserial
>>> [ 6.048747] usbcore: registered new interface driver usbserial_generic
>>> [ 6.055243] usbserial: USB Serial support registered for generic
>>> [ 6.061441] mousedev: PS/2 mouse device common for all mice
>>> [ 6.074583] device-mapper: uevent: version 1.0.3
>>> [ 6.078438] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
>>> initialised: dm-devel(a)redhat.com
>>> [ 6.089235] ledtrig-cpu: registered to indicate activity on CPUs
>>> [ 6.094218] hidraw: raw HID events driver (C) Jiri Kosina
>>> [ 6.099403] usbcore: registered new interface driver usbhid
>>> [ 6.104724] usbhid: USB HID core driver
>>> [ 6.111414] drop_monitor: Initializing network drop monitor service
>>> [ 6.116525] ip_tables: (C) 2000-2006 Netfilter Core Team
>>> [ 6.121784] Initializing XFRM netlink socket
>>> [ 6.126613] NET: Registered protocol family 10
>>>
>> Hello Stewart,
>>
>> I'm at the same step, even with kernel 4.13 from Rawhide. No kernel after
>> 4.6.5-300.fc24 is working.
>> After this I tried to get a fresh install of F26 with
>> "fedora-arm-installer --target=none" and afterwards writing u-boot
with
>> sd_fusing.1M.sh = No chance, System didn't boot.
>> Something goes wrong.
>>
>> Andreas
> After looking at the serial output from the Ubuntu boot, it would appear
> that what follows (and where Fedora 26 is getting hung up) is when the
> initramfs kernel is looking to mount the root partition and then init all
> other processes. My suspicion is that dracut is still not working
> correctly, as I have updated the root UUID in extlinux.conf as well as all
> UUIDs in /etc/fstab. If dracut fails to build a good initramfs, it doesn't
> matter what revision of u-boot or the kernel we try to use. On boot up, the
> system always fails to find the root partition to mount.
>
> Can anyone confirm my thoughts (findings)? Does anyone have a work around
> to try?
I've had other people have luck with Exynos devices.
Hello Peter,
Is there a way I can try an older version of dracut? We know the
version of dracut at f24, kernel 4.6.5-300 was working. If so, what
would I have to do to transfer such a dracut to f26? What libraries
would have to be transferred. Nothing since f24, kernel 4.6.5-300 has
worked for the odroid. What else can we try?
Also, the odroid-xu4 contains two switchable storage devices (a microSD
and an eMMC), from which the system can be booted. I do not know if any
of the other Exynos systems contain such a hardware configuration, and
further, whether or not this is creating a problem for dracut. Perhaps
you do. Can you provide some of the other Exynos devices that are working?
Stewart
Stewart
10:33 a.m.
On Wed, Aug 16, 2017 at 4:26 PM, Stewart Samuels <searider74(a)gmail.com> wrote:
On 08/16/2017 07:53 AM, Peter Robinson wrote:
>
> On Wed, Aug 16, 2017 at 3:14 PM, Stewart Samuels <searider74(a)gmail.com>
> wrote:
>>
>>
>> On 08/16/2017 04:14 AM, arm_ml(a)rirasoft.de wrote:
>>>
>>> Am , schrieb Stewart Samuels:
>>>>
>>>> Ok. The u-boot issue was my mistake. I was trying to use the
>>>> /usr/share/uboot/odroid u-boot files instead of the
>>>> /usr/share/uboot/odroid-xu3 files. Now I am getting output to the
>>>> serial console and the system begins the boot process as expected.
>>>> However, it hangs in the kernel seemingly trying to do something with
>>>> the network. Anyone have any ideas as to what I can try to get past
>>>> this? Following is my serial console output:
>>>>
>>>>
>>>>
>>>> U-Boot 2017.05 (Jun 24 2017 - 16:40:39 +0000) for ODROID-XU3
>>>>
>>>> CPU: Exynos5422 @ 800 MHz
>>>> Model: Odroid XU3 based on EXYNOS5422
>>>> Board: Odroid XU3 based on EXYNOS5422
>>>> Type: xu4
>>>> DRAM: 2 GiB
>>>> MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
>>>> *** Warning - bad CRC, using default environment
>>>>
>>>> In: serial
>>>> Out: serial
>>>> Err: serial
>>>> Net: No ethernet found.
>>>> Hit any key to stop autoboot: 0
>>>> mmc_init: -5, time 4
>>>> switch to partitions #0, OK
>>>> mmc0 is current device
>>>> Scanning mmc 0:2...
>>>> Found /extlinux/extlinux.conf
>>>> Retrieving file: /extlinux/extlinux.conf
>>>> 513 bytes read in 15 ms (33.2 KiB/s)
>>>> Ignoring unknown command: ui
>>>> Ignoring malformed menu command: autoboot
>>>> Ignoring malformed menu command: hidden
>>>> Ignoring unknown command: totaltimeout
>>>> Fedora-Mate-armhfp-26-1.5 Boot Options.
>>>> 1: Fedora-Mate-armhfp-26-1.5 (4.11.8-300.fc26.armv7hl)
>>>> Enter choice: 1: Fedora-Mate-armhfp-26-1.5
>>>> (4.11.8-300.fc26.armv7hl)
>>>> Retrieving file: /initramfs-4.11.8-300.fc26.armv7hl.img
>>>> 55227208 bytes read in 15615 ms (3.4 MiB/s)
>>>> Retrieving file: /vmlinuz-4.11.8-300.fc26.armv7hl
>>>> 6267616 bytes read in 503 ms (11.9 MiB/s)
>>>> append: ro root=UUID=01a7a7b0-fb7b-4b87-a2b4-c330daaab202 cma=192MB
>>>> Retrieving file: /dtb-4.11.8-300.fc26.armv7hl/exynos5422-odroidxu4.dtb
>>>> 54941 bytes read in 277 ms (193.4 KiB/s)
>>>> Kernel image @ 0x42000000 [ 0x000000 - 0x5fa2e0 ]
>>>> ## Flattened Device Tree blob at 43000000
>>>> Booting using the fdt blob at 0x43000000
>>>> Loading Ramdisk to 4cb54000, end 4ffff348 ... OK
>>>> Loading Device Tree to 4cb43000, end 4cb5369c ... OK
>>>>
>>>> Starting kernel ...
>>>>
>>>> [ 0.000000] Booting Linux on physical CPU 0x100
>>>> [ 0.000000] Linux version 4.11.8-300.fc26.armv7hl
>>>> (mockbuild(a)buildvm-armv7-13.arm.fedoraproject.org) (gcc version 7.1.1
>>>> 20177
>>>> [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7),
>>>> cr=10c5387d
>>>> [ 0.000000] CPU: div instructions available: patching division code
>>>> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
>>>> instruction cache
>>>> [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
>>>> [ 0.000000] Memory policy: Data cache writealloc
>>>> [ 0.000000] efi: Getting EFI parameters from FDT:
>>>> [ 0.000000] efi: UEFI not found.
>>>> [ 0.000000] Reserved memory: created DMA memory pool at 0xbe200000,
>>>> size 8 MiB
>>>> [ 0.000000] OF: reserved mem: initialized node region_mfc_right,
>>>> compatible id shared-dma-pool
>>>> [ 0.000000] Reserved memory: created DMA memory pool at 0xbbe00000,
>>>> size 36 MiB
>>>> [ 0.000000] OF: reserved mem: initialized node region_mfc_left,
>>>> compatible id shared-dma-pool
>>>> [ 0.000000] cma: Reserved 192 MiB at 0xafc00000
>>>> [ 0.000000] Samsung CPU ID: 0xe5422001
>>>> [ 0.000000] Running under secure firmware.
>>>> [ 0.000000] percpu: Embedded 15 pages/cpu @eede0000 s31628 r8192
>>>> d21620 u61440
>>>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
>>>> Total pages: 505664
>>>> [ 0.000000] Kernel command line: ro
>>>> root=UUID=01a7a7b0-fb7b-4b87-a2b4-c330daaab202 cma=192MB
>>>> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>>>> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7,
>>>> 524288
>>>> bytes)
>>>> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
>>>> bytes)
>>>> [ 0.000000] Memory: 1744476K/2029568K available (7440K kernel code,
>>>> 1301K rwdata, 3528K rodata, 2048K init, 518K bss, 88484K)
>>>> [ 0.000000] Virtual kernel memory layout:
>>>> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
>>>> [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
>>>> [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
>>>> [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
>>>> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
>>>> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
>>>> [ 0.000000] .text : 0xc0208000 - 0xc0a4408c (8433 kB)
>>>> [ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB)
>>>> [ 0.000000] .data : 0xc1000000 - 0xc1145584 (1302 kB)
>>>> [ 0.000000] .bss : 0xc1145584 - 0xc11c7160 ( 519 kB)
>>>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8,
>>>> Nodes=1
>>>> [ 0.000000] Hierarchical RCU implementation.
>>>> [ 0.000000] Build-time adjustment of leaf fanout to 32.
>>>> [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
>>>> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32,
>>>> nr_cpu_ids=8
>>>> [ 0.000000] NR_IRQS:16 nr_irqs:16 16
>>>> [ 0.000000] GIC: Using split EOI/Deactivate mode
>>>> [ 0.000000] GIC physical location is 0x10481000
>>>> [ 0.000000] Switching to timer-based delay loop, resolution 41ns
>>>> [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles:
>>>> 0xffffffff, max_idle_ns: 79635851949 ns
>>>> [ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps
>>>> every 89478484971ns
>>>> [ 0.007592] Console: colour dummy device 80x30
>>>> [ 0.008712] console [tty0] enabled
>>>> [ 0.008774] Calibrating delay loop (skipped), value calculated
>>>> using timer frequency.. 48.00 BogoMIPS (lpj=24000)
>>>> [ 0.008835] pid_max: default: 32768 minimum: 301
>>>> [ 0.009324] Security Framework initialized
>>>> [ 0.009362] Yama: becoming mindful.
>>>> [ 0.009409] SELinux: Initializing.
>>>> [ 0.009826] Mount-cache hash table entries: 2048 (order: 1, 8192
>>>> bytes)
>>>> [ 0.009866] Mountpoint-cache hash table entries: 2048 (order: 1,
>>>> 8192
>>>> bytes)
>>>> [ 0.011164] CPU: Testing write buffer coherency: ok
>>>> [ 0.011237] ftrace: allocating 31692 entries in 62 pages
>>>> [ 0.090881] CPU0: update cpu_capacity 448
>>>> [ 0.090931] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
>>>> [ 0.091688] Setting up static identity map for 0x40300000 -
>>>> 0x40300098
>>>> [ 0.092453] ARM CCI driver probed
>>>> [ 0.092684] Exynos MCPM support installed
>>>> [ 0.101287] EFI services will not be available.
>>>> [ 0.102007] smp: Bringing up secondary CPUs ...
>>>> [ 0.103098] CPU1: update cpu_capacity 448
>>>> [ 0.103106] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
>>>> [ 0.104253] CPU2: update cpu_capacity 448
>>>> [ 0.104261] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
>>>> [ 0.105393] CPU3: update cpu_capacity 448
>>>> [ 0.105401] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
>>>> [ 0.106573] CPU4: update cpu_capacity 1535
>>>> [ 0.106582] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
>>>> [ 0.107833] CPU5: update cpu_capacity 1535
>>>> [ 0.107841] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
>>>> [ 0.109009] CPU6: update cpu_capacity 1535
>>>> [ 0.109017] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
>>>> [ 0.110172] CPU7: update cpu_capacity 1535
>>>> [ 0.110180] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
>>>> [ 0.110322] smp: Brought up 1 node, 8 CPUs
>>>> [ 0.110632] SMP: Total of 8 processors activated (384.00 BogoMIPS).
>>>> [ 0.110660] CPU: WARNING: CPU(s) started in wrong/inconsistent
>>>> modes (primary CPU mode 0x1a)
>>>> [ 0.110698] CPU: This may indicate a broken bootloader or firmware.
>>>> [ 0.113438] devtmpfs: initialized
>>>> [ 0.136806] VFP support v0.3: implementor 41 architecture 2 part 30
>>>> variant 7 rev 3
>>>> [ 0.137402] clocksource: jiffies: mask: 0xffffffff max_cycles:
>>>> 0xffffffff, max_idle_ns: 1911260446275000 ns
>>>> [ 0.137466] futex hash table entries: 2048 (order: 5, 131072 bytes)
>>>> [ 0.149460] pinctrl core: initialized pinctrl subsystem
>>>> [ 0.153109] NET: Registered protocol family 16
>>>> [ 0.155535] DMA: preallocated 256 KiB pool for atomic coherent
>>>> allocations
>>>> [ 0.160694] cpuidle: using governor menu
>>>> [ 0.161950] No ATAGs?
>>>> [ 0.162295] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
>>>> watchpoint registers.
>>>> [ 0.162357] hw-breakpoint: maximum watchpoint size is 8 bytes.
>>>> [ 0.164179] Serial: AMBA PL011 UART driver
>>>> [ 0.169405] random: fast init done
>>>> [ 0.201022] EXYNOS5420 PMU initialized
>>>> [ 0.243665] vgaarb: loaded
>>>> [ 0.244725] SCSI subsystem initialized
>>>> [ 0.245461] usbcore: registered new interface driver usbfs
>>>> [ 0.245582] usbcore: registered new interface driver hub
>>>> [ 0.245794] usbcore: registered new device driver usb
>>>> [ 0.248255] NetLabel: Initializing
>>>> [ 0.248292] NetLabel: domain hash size = 128
>>>> [ 0.248316] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
>>>> [ 0.248417] NetLabel: unlabeled traffic allowed by default
>>>> [ 0.248930] clocksource: Switched to clocksource mct-frc
>>>> [ 0.351833] VFS: Disk quotas dquot_6.6.0
>>>> [ 0.352046] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
>>>> bytes)
>>>> [ 0.371166] NET: Registered protocol family 2
>>>> [ 0.372401] TCP established hash table entries: 8192 (order: 3,
>>>> 32768
>>>> bytes)
>>>> [ 0.372542] TCP bind hash table entries: 8192 (order: 4, 65536
>>>> bytes)
>>>> [ 0.372744] TCP: Hash tables configured (established 8192 bind 8192)
>>>> [ 0.373056] UDP hash table entries: 512 (order: 2, 16384 bytes)
>>>> [ 0.373130] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>>>> [ 0.373721] NET: Registered protocol family 1
>>>> [ 0.374567] Unpacking initramfs...
>>>> [ 4.807852] Freeing initrd memory: 53936K
>>>> [ 4.887021] audit: initializing netlink subsys (disabled)
>>>> [ 4.887254] audit: type=2000 audit(4.831:1): state=initialized
>>>> audit_enabled=0 res=1
>>>> [ 4.887633] Initialise system trusted keyrings
>>>> [ 4.887849] workingset: timestamp_bits=14 max_order=19
>>>> bucket_order=5
>>>> [ 4.895726] zbud: loaded
>>>> [ 5.191665] NET: Registered protocol family 38
>>>> [ 5.191703] Key type asymmetric registered
>>>> [ 5.191726] Asymmetric key parser 'x509' registered
>>>> [ 5.191813] bounce: pool size: 64 pages
>>>> [ 5.191908] Block layer SCSI generic (bsg) driver version 0.4
>>>> loaded (major 250)
>>>> [ 5.192213] io scheduler noop registered
>>>> [ 5.192237] io scheduler deadline registered
>>>> [ 5.192640] io scheduler cfq registered (default)
>>>> [ 5.192665] io scheduler mq-deadline registered
>>>> [ 5.193307] atomic64_test: passed
>>>> [ 5.217683] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>>>> [ 5.227351] Serial: AMBA driver
>>>> [ 5.227636] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58,
>>>> base_baud = 0) is a S3C6400/10
>>>> [ 5.228075] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59,
>>>> base_baud = 0) is a S3C6400/10
>>>> [ 5.228459] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60,
>>>> base_baud = 0) is a S3C6400/10
>>>> [ 5.985336] console [ttySAC2] enabled
>>>> [ 5.989406] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61,
>>>> base_baud = 0) is a S3C6400/10
>>>> [ 5.999986] msm_serial: driver initialized
>>>> [ 6.003018] STMicroelectronics ASC driver initialized
>>>> [ 6.012392] libphy: Fixed MDIO Bus: probed
>>>> [ 6.015806] ehci_hcd: USB 2.0 'Enhanced' Host Controller
(EHCI)
>>>> Driver
>>>> [ 6.021609] ehci-pci: EHCI PCI platform driver
>>>> [ 6.026067] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI)
Driver
>>>> [ 6.032152] ohci-pci: OHCI PCI platform driver
>>>> [ 6.036611] uhci_hcd: USB Universal Host Controller Interface driver
>>>> [ 6.043252] usbcore: registered new interface driver usbserial
>>>> [ 6.048747] usbcore: registered new interface driver
>>>> usbserial_generic
>>>> [ 6.055243] usbserial: USB Serial support registered for generic
>>>> [ 6.061441] mousedev: PS/2 mouse device common for all mice
>>>> [ 6.074583] device-mapper: uevent: version 1.0.3
>>>> [ 6.078438] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
>>>> initialised: dm-devel(a)redhat.com
>>>> [ 6.089235] ledtrig-cpu: registered to indicate activity on CPUs
>>>> [ 6.094218] hidraw: raw HID events driver (C) Jiri Kosina
>>>> [ 6.099403] usbcore: registered new interface driver usbhid
>>>> [ 6.104724] usbhid: USB HID core driver
>>>> [ 6.111414] drop_monitor: Initializing network drop monitor service
>>>> [ 6.116525] ip_tables: (C) 2000-2006 Netfilter Core Team
>>>> [ 6.121784] Initializing XFRM netlink socket
>>>> [ 6.126613] NET: Registered protocol family 10
>>>>
>>> Hello Stewart,
>>>
>>> I'm at the same step, even with kernel 4.13 from Rawhide. No kernel
>>> after
>>> 4.6.5-300.fc24 is working.
>>> After this I tried to get a fresh install of F26 with
>>> "fedora-arm-installer --target=none" and afterwards writing u-boot
with
>>> sd_fusing.1M.sh = No chance, System didn't boot.
>>> Something goes wrong.
>>>
>>> Andreas
>>
>> After looking at the serial output from the Ubuntu boot, it would appear
>> that what follows (and where Fedora 26 is getting hung up) is when the
>> initramfs kernel is looking to mount the root partition and then init all
>> other processes. My suspicion is that dracut is still not working
>> correctly, as I have updated the root UUID in extlinux.conf as well as
>> all
>> UUIDs in /etc/fstab. If dracut fails to build a good initramfs, it
>> doesn't
>> matter what revision of u-boot or the kernel we try to use. On boot up,
>> the
>> system always fails to find the root partition to mount.
>>
>> Can anyone confirm my thoughts (findings)? Does anyone have a work
>> around
>> to try?
>
> I've had other people have luck with Exynos devices.
Hello Peter,
Is there a way I can try an older version of dracut? We know the version of
dracut at f24, kernel 4.6.5-300 was working. If so, what would I have to do
to transfer such a dracut to f26? What libraries would have to be
transferred. Nothing since f24, kernel 4.6.5-300 has worked for the odroid.
What else can we try?
Not easily, and I _KNOW_ the older versions were not working OOTB
because they never had the logic to pull in the MMC drivers for any
device that used the DesignWare MMC IP.
Also, the odroid-xu4 contains two switchable storage devices (a
microSD and
an eMMC), from which the system can be booted. I do not know if any of the
other Exynos systems contain such a hardware configuration, and further,
whether or not this is creating a problem for dracut. Perhaps you do. Can
you provide some of the other Exynos devices that are working?
Nope, I don't, I currently don't have any exynos based devices but I
know there have been people using the Arndale fine (issue in F-26 with
initial-setup on the serial console aside) and Chromebooks (we had an
issue ~ 4.8 due to a change in MMC power sequencing which stopped the
wifi working) that have used more recent kernels up to AFAIK 4.11.x
Peter
3:35 p.m.
El mar, 15-08-2017 a las 17:25 -0700, Stewart Samuels escribió:
Ok. The u-boot issue was my mistake. I was trying to use the
/usr/share/uboot/odroid u-boot files instead of the
/usr/share/uboot/odroid-xu3 files. Now I am getting output to the
serial console and the system begins the boot process as expected.
However, it hangs in the kernel seemingly trying to do something
with
the network. Anyone have any ideas as to what I can try to get past
this? Following is my serial console output:
try adding cpuide.off=1 to the boot line and see if it boots okay then.
Dennis
4:46 p.m.
Hi Dennis,
I placed this parameter value on the append line of extlinux.conf. This
did not get me past the point of failure in the boot process. Did I
insert the parameter on the correct line? If not, please provide more
information, perhaps even an example.
Thanks for your response and suggestion.
Kind regards,
Stewart
On 08/22/2017 01:35 PM, Dennis Gilmore wrote:
El mar, 15-08-2017 a las 17:25 -0700, Stewart Samuels escribió:
> Ok. The u-boot issue was my mistake. I was trying to use the
> /usr/share/uboot/odroid u-boot files instead of the
> /usr/share/uboot/odroid-xu3 files. Now I am getting output to the
> serial console and the system begins the boot process as expected.
> However, it hangs in the kernel seemingly trying to do something
> with
> the network. Anyone have any ideas as to what I can try to get past
> this? Following is my serial console output:
>
try adding cpuide.off=1 to the boot line and see if it boots okay then.
Dennis
5:14 p.m.
Hello Dennis,
The parameter you provided me below was incorrect (spelling error). I
used cpuidle.off=1 and the system now boot much further, but eventually
goes into a:
dracut-initqueue[493]: Warning: dracut-initqueue timeout - starting
timeout scripts
loop and never completes the boot process.
Any other suggestions? See the output from the serial port that follows:
-----------------------------------------------------------------------------------------------------
U-Boot 2017.05 (Jun 24 2017 - 16:40:39 +0000) for ODROID-XU3
CPU: Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type: xu4
DRAM: 2 GiB
MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
mmc_init: -95, time 11
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:2...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
527 bytes read in 14 ms (36.1 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command: autoboot
Ignoring malformed menu command: hidden
Ignoring unknown command: totaltimeout
Fedora-Mate-armhfp-26-1.5 Boot Options.
1: Fedora-Mate-armhfp-26-1.5 (4.11.8-300.fc26.armv7hl)
Enter choice: 1: Fedora-Mate-armhfp-26-1.5 (4.11.8-300.fc26.armv7hl)
Retrieving file: /initramfs-4.11.8-300.fc26.armv7hl.img
55227208 bytes read in 2480 ms (21.2 MiB/s)
Retrieving file: /vmlinuz-4.11.8-300.fc26.armv7hl
6267616 bytes read in 306 ms (19.5 MiB/s)
append: ro root=UUID=11cf09b5-43b2-4588-969d-550b4e2af055 cpuidle.off=1
cma=192MB
Retrieving file: /dtb-4.11.8-300.fc26.armv7hl/exynos5422-odroidxu4.dtb
54941 bytes read in 52 ms (1 MiB/s)
Kernel image @ 0x42000000 [ 0x000000 - 0x5fa2e0 ]
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Ramdisk to 4cb54000, end 4ffff348 ... OK
Loading Device Tree to 4cb43000, end 4cb5369c ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x100
[ 0.000000] Linux version 4.11.8-300.fc26.armv7hl
(mockbuild(a)buildvm-armv7-13.arm.fedoraproject.org) (gcc version 7.1.1 201707
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created DMA memory pool at 0xbe200000,
size 8 MiB
[ 0.000000] OF: reserved mem: initialized node region_mfc_right,
compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0xbbe00000,
size 36 MiB
[ 0.000000] OF: reserved mem: initialized node region_mfc_left,
compatible id shared-dma-pool
[ 0.000000] cma: Reserved 192 MiB at 0xafc00000
[ 0.000000] Samsung CPU ID: 0xe5422001
[ 0.000000] Running under secure firmware.
[ 0.000000] percpu: Embedded 15 pages/cpu @eede0000 s31628 r8192
d21620 u61440
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 505664
[ 0.000000] Kernel command line: ro
root=UUID=11cf09b5-43b2-4588-969d-550b4e2af055 cpuidle.off=1 cma=192MB
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Memory: 1744476K/2029568K available (7440K kernel code,
1301K rwdata, 3528K rodata, 2048K init, 518K bss, 88484K )
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0a4408c (8433 kB)
[ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB)
[ 0.000000] .data : 0xc1000000 - 0xc1145584 (1302 kB)
[ 0.000000] .bss : 0xc1145584 - 0xc11c7160 ( 519 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] GIC physical location is 0x10481000
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps
every 89478484971ns
[ 0.007591] Console: colour dummy device 80x30
[ 0.008713] console [tty0] enabled
[ 0.008774] Calibrating delay loop (skipped), value calculated using
timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.008835] pid_max: default: 32768 minimum: 301
[ 0.009324] Security Framework initialized
[ 0.009361] Yama: becoming mindful.
[ 0.009408] SELinux: Initializing.
[ 0.009826] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.009867] Mountpoint-cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.011169] CPU: Testing write buffer coherency: ok
[ 0.011245] ftrace: allocating 31692 entries in 62 pages
[ 0.090906] CPU0: update cpu_capacity 448
[ 0.090956] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.091722] Setting up static identity map for 0x40300000 - 0x40300098
[ 0.092479] ARM CCI driver probed
[ 0.092713] Exynos MCPM support installed
[ 0.101325] EFI services will not be available.
[ 0.102047] smp: Bringing up secondary CPUs ...
[ 0.103139] CPU1: update cpu_capacity 448
[ 0.103147] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.104319] CPU2: update cpu_capacity 448
[ 0.104327] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.105462] CPU3: update cpu_capacity 448
[ 0.105470] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[ 0.106648] CPU4: update cpu_capacity 1535
[ 0.106657] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.107903] CPU5: update cpu_capacity 1535
[ 0.107911] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.109069] CPU6: update cpu_capacity 1535
[ 0.109078] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.110219] CPU7: update cpu_capacity 1535
[ 0.110227] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.110367] smp: Brought up 1 node, 8 CPUs
[ 0.110677] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[ 0.110705] CPU: WARNING: CPU(s) started in wrong/inconsistent modes
(primary CPU mode 0x1a)
[ 0.110743] CPU: This may indicate a broken bootloader or firmware.
[ 0.113492] devtmpfs: initialized
[ 0.136911] VFP support v0.3: implementor 41 architecture 2 part 30
variant 7 rev 3
[ 0.137504] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.137567] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.149473] pinctrl core: initialized pinctrl subsystem
[ 0.153110] NET: Registered protocol family 16
[ 0.155566] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.161569] No ATAGs?
[ 0.161913] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
watchpoint registers.
[ 0.161981] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.163819] Serial: AMBA PL011 UART driver
[ 0.169473] random: fast init done
[ 0.200419] EXYNOS5420 PMU initialized
[ 0.242967] vgaarb: loaded
[ 0.244031] SCSI subsystem initialized
[ 0.244774] usbcore: registered new interface driver usbfs
[ 0.244893] usbcore: registered new interface driver hub
[ 0.245111] usbcore: registered new device driver usb
[ 0.247788] NetLabel: Initializing
[ 0.247826] NetLabel: domain hash size = 128
[ 0.247850] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.247960] NetLabel: unlabeled traffic allowed by default
[ 0.248528] clocksource: Switched to clocksource mct-frc
[ 0.351325] VFS: Disk quotas dquot_6.6.0
[ 0.351485] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.370155] NET: Registered protocol family 2
[ 0.371485] TCP established hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.371691] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.371893] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.372167] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.372239] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.372890] NET: Registered protocol family 1
[ 0.373826] Unpacking initramfs...
[ 4.732409] Freeing initrd memory: 53936K
[ 4.804263] audit: initializing netlink subsys (disabled)
[ 4.804481] audit: type=2000 audit(4.748:1): state=initialized
audit_enabled=0 res=1
[ 4.804946] Initialise system trusted keyrings
[ 4.805183] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 4.813102] zbud: loaded
[ 5.107473] NET: Registered protocol family 38
[ 5.107512] Key type asymmetric registered
[ 5.107602] Asymmetric key parser 'x509' registered
[ 5.107694] bounce: pool size: 64 pages
[ 5.107791] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 250)
[ 5.108020] io scheduler noop registered
[ 5.108043] io scheduler deadline registered
[ 5.108441] io scheduler cfq registered (default)
[ 5.108465] io scheduler mq-deadline registered
[ 5.109078] atomic64_test: passed
[ 5.134056] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 5.143635] Serial: AMBA driver
[ 5.143928] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58,
base_baud = 0) is a S3C6400/10
[ 5.144342] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59,
base_baud = 0) is a S3C6400/10
[ 5.144745] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60,
base_baud = 0) is a S3C6400/10
[ 5.898934] console [ttySAC2] enabled
[ 5.902981] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61,
base_baud = 0) is a S3C6400/10
[ 5.913583] msm_serial: driver initialized
[ 5.916619] STMicroelectronics ASC driver initialized
[ 5.925886] libphy: Fixed MDIO Bus: probed
[ 5.929367] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.935100] ehci-pci: EHCI PCI platform driver
[ 5.939602] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.945651] ohci-pci: OHCI PCI platform driver
[ 5.950121] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.956765] usbcore: registered new interface driver usbserial
[ 5.962235] usbcore: registered new interface driver usbserial_generic
[ 5.968733] usbserial: USB Serial support registered for generic
[ 5.974929] mousedev: PS/2 mouse device common for all mice
[ 5.988066] device-mapper: uevent: version 1.0.3
[ 5.991921] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
initialised: dm-devel(a)redhat.com
[ 6.000408] failed to register cpuidle driver
[ 6.005053] ledtrig-cpu: registered to indicate activity on CPUs
[ 6.010350] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.015608] usbcore: registered new interface driver usbhid
[ 6.020886] usbhid: USB HID core driver
[ 6.027682] drop_monitor: Initializing network drop monitor service
[ 6.032810] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.037978] Initializing XFRM netlink socket
[ 6.042966] NET: Registered protocol family 10
[ 6.063610] Segment Routing with IPv6
[ 6.065901] mip6: Mobile IPv6
[ 6.068788] NET: Registered protocol family 17
[ 6.073899] ThumbEE CPU extension supported.
[ 6.077453] Registering SWP/SWPB emulation handler
[ 6.082220] big.LITTLE switcher initializing
[ 6.086462] CPU0 paired with CPU7
[ 6.089751] CPU1 paired with CPU6
[ 6.093041] CPU2 paired with CPU5
[ 6.096334] CPU3 paired with CPU4
[ 6.099630] GIC ID for CPU 0 cluster 1 is 4
[ 6.103789] GIC ID for CPU 1 cluster 1 is 5
[ 6.107948] GIC ID for CPU 2 cluster 1 is 6
[ 6.112107] GIC ID for CPU 3 cluster 1 is 7
[ 6.116267] GIC ID for CPU 0 cluster 0 is 0
[ 6.122086] IRQ54 no longer affine to CPU4
[ 6.127324] GIC ID for CPU 1 cluster 0 is 1
[ 6.135604] IRQ55 no longer affine to CPU5
[ 6.139319] GIC ID for CPU 2 cluster 0 is 2
[ 6.147667] IRQ56 no longer affine to CPU6
[ 6.151813] GIC ID for CPU 3 cluster 0 is 3
[ 6.159788] IRQ57 no longer affine to CPU7
[ 6.164315] big.LITTLE switcher initialized
[ 6.172209] registered taskstats version 1
[ 6.175295] Loading compiled-in X.509 certificates
[ 6.196506] alg: No test for pkcs1pad(rsa,sha256)
(pkcs1pad(rsa-generic,sha256))
[ 6.211622] Loaded X.509 cert 'Fedora kernel signing key:
03162a918d07b67ba6af65b45b2ec58dafb524d8'
[ 6.219446] zswap: loaded using pool lzo/zbud
[ 6.240940] Key type big_key registered
[ 6.260362] Key type encrypted registered
[ 6.297985] hctosys: unable to open rtc device (rtc0)
[ 6.301652] sr_init: No PMIC hook to init smartreflex
[ 6.307608] sr_init: platform driver register failed for SR
[ 6.314282] samsung-uart 12c20000.serial: DMA request failed, DMA
will not be used
[ 6.325695] Freeing unused kernel memory: 2048K
[ 6.329074] rodata_test: test data was not read only
[ 6.372735] systemd[1]: System time before build time, advancing clock.
[ 6.401997] systemd[1]: systemd 233 running in system mode. (+PAM
+AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBC)
[ 6.421489] systemd[1]: Detected architecture arm.
[ 6.425542] systemd[1]: Running in initial RAM disk.
Welcome to Fedora 26 (Twenty Six) dracut-044-183.fc26 (Initramfs)!
[ 6.440745] systemd[1]: No hostname configured.
[ 6.443912] systemd[1]: Set hostname to <localhost>.
[ 6.448948] systemd[1]: Initializing machine ID from random generator.
[ 6.913011] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 6.922083] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 6.935762] systemd[1]: Reached target Timers.
[ OK ] Reached target Timers.
[ 6.946731] systemd[1]: Reached target Local File Systems.
[ OK ] Reached target Local File Systems.
[ OK ] Listening on Journal Socket.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Created slice System Slice.
Starting Apply Kernel Variables...
Starting Setup Virtual Console...
Starting dracut cmdline hook...
Starting Create list of required st��…ce nodes for the current
kernel...
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on Journal Audit Socket.
Starting Journal Service...
[ OK ] Reached target Slices.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Setup Virtual Console.
[ OK 7.106072] audit: type=1130 audit(1498599911.729:2): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit='
[ 7.126370] audit: type=1131 audit(1498599911.729:3): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=system'
m] Started Create list of required sta��…vice nodes for the current kernel.
[ 7.156982] audit: type=1130 audit(1498599911.783:4): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-s'
Starting Create Static Device Nodes in /dev...
[ OK ] Started Journal Service.
[ 7.199339] audit: type=1130 audit(1498599911.825:5): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=system'
[ OK ] Started Create Static Device Nodes in /dev.
[ 7.228040] audit: type=1130 audit(1498599911.854:6): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=system'
[ 7.702637] random: crng init done
[ OK ] Started dracut cmdline hook.
[ 8.254886] audit: type=1130 audit(1498599912.881:7): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut'
Starting Open-iSCSI...
Starting dracut pre-udev hook...
[ 8.322323] Loading iSCSI transport class v2.0-870.
[ OK ] Started Open-iSCSI.
[ 8.335111] audit: type=1130 audit(1498599912.961:8): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=iscsid'
[ 8.501809] RPC: Registered named UNIX socket transport module.
[ 8.506341] RPC: Registered udp transport module.
[ 8.511023] RPC: Registered tcp transport module.
[ 8.515689] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.594771] dracut-pre-udev[342]: rpcbind: /run/rpcbind/rpcbind.lock:
No such file or directory
[ 8.899178] dracut-pre-udev[342]: rpc.idmapd: conf_reinit: open
("(null)", O_RDONLY) failed
[ 8.911228] dracut-pre-udev[342]: rpc.idmapd: conf_reinit: open
("(null)", O_RDONLY) failed
[ OK ] Started dracut pre-udev hook.
[ 9.097886] audit: type=1130 audit(1498599913.724:9): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut'
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
[ 9.157117] audit: type=1130 audit(1498599913.783:10): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=syste'
Starting dracut pre-trigger hook...
[ OK ] Started dracut pre-trigger hook.
[ 9.867910] audit: type=1130 audit(1498599914.494:11): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracu'
Starting udev Coldplug all Devices...
Mounting Configuration File System...
[ OK ] Mounted Configuration File System.
[ OK ] Started udev Coldplug all Devices.
[ 10.493178] audit: type=1130 audit(1498599915.119:12): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=syste'
[ 10.640274] s5p-secss 10830000.sss: s5p-sss driver registered
Starting dracut initqueue hook...
Starting Show Plymouth Boot Screen...
[ 10.715857] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply
vbus not found, using dummy regulator
[ 10.724074] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply
vbus-boost not found, using dummy regulator
[ 10.741627] audit: type=1130 audit(1498599915.364:13): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymo'
[ 10.760212] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply
vbus not found, using dummy regulator
[ 10.774723] ohci-exynos: OHCI EXYNOS driver
[ OK ] Started Forward Password Requests to Plymouth Directory Watch.
[ OK ] Reache[ 10.789051] exynos5_usb3drd_phy 12500000.phy:
12500000.phy supply vbus-boost not found, using dummy regulator
d target Paths.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Reached target System Initialization.
[ OK ] Listening on Open-iSCSI iscsiuio Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Ba[ 10.823058] ehci-exynos: EHCI EXYNOS driver
[ 10.824756] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus
not found, using dummy regulator
[ 10.831596] exynos-ohci 12120000.usb: USB Host Controller
[ 10.832042] exynos-ohci 12120000.usb: new USB bus registered,
assigned bus number 1
[ 10.832439] exynos-ohci 12120000.usb: irq 71, io mem 0x12120000
[ 10.853998] Synopsys Designware Multimedia Card Interface Driver
sic System.
[ 10.878840] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 10.889048] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.894454] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.901654] usb usb1: Product: USB Host Controller
[ 10.906399] usb usb1: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
ohci_hcd
[ 10.913248] usb usb1: SerialNumber: 12120000.usb
[ 10.918931] hub 1-0:1.0: USB hub found
[ 10.921643] hub 1-0:1.0: 3 ports detected
[ 10.956829] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 10.961921] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 10.972965] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 10.981444] exynos-ehci 12110000.usb: EHCI Host Controller
[ 10.987355] exynos-ehci 12110000.usb: new USB bus registered,
assigned bus number 2
[ 10.991360] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.003670] alloc_contig_range: [afc41, afc42) PFNs busy
[ 11.007722] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.014070] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.029251] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.039645] exynos-ehci 12110000.usb: irq 71, io mem 0x12110000
[ 11.050644] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[ 11.055789] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.062047] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 11.069237] usb usb2: Product: EHCI Host Controller
[ 11.074084] usb usb2: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
ehci_hcd
[ 11.080935] usb usb2: SerialNumber: 12110000.usb
[ 11.105617] hub 2-0:1.0: USB hub found
[ 11.108052] hub 2-0:1.0: 3 ports detected
[ 11.122281] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.128050] s3c-i2c 12c80000.i2c: slave address 0x00
[ 11.132752] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
[ 11.136308] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[ 11.136319] dma-pl330 121a0000.pdma: DBUFF-32x4bytes
Num_Chans-8 Num_Peri-32 Num_Events-32
[ 11.140871] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[ 11.140882] dma-pl330 121b0000.pdma: DBUFF-32x4bytes
Num_Chans-8 Num_Peri-32 Num_Events-32
[ 11.142300] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[ 11.142311] dma-pl330 10800000.mdma: DBUFF-64x8bytes
Num_Chans-8 Num_Peri-1 Num_Events-32
[ 11.183438] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.189741] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.195122] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.210711] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.212314] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
[ 11.213725] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 11.233187] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 11.233192] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.233212] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.233262] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.240665] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.240720] alloc_contig_range: [afc48, afc49) PFNs busy
[ 11.240798] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.240814] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.240859] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.292564] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 11.298160] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 74,64
bit host data width,64 deep fifo
[ 11.315085] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517
[ 11.316817] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.327315] alloc_contig_range: [afc45, afc46) PFNs busy
[ 11.332757] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.337833] exynos-rot 11c00000.rotator: The exynos rotator is probed
successfully
[ 11.339681] exynos-drm-gsc 13e00000.video-scaler: failed to get
system register.
[ 11.340069] exynos-drm-gsc 13e00000.video-scaler: drm gsc registered
successfully.
[ 11.340201] exynos-drm-gsc 13e10000.video-scaler: failed to get
system register.
[ 11.340510] exynos-drm-gsc 13e10000.video-scaler: drm gsc registered
successfully.
[ 11.341797] exynos-drm-ipp exynos-drm-ipp: drm ipp registered
successfully.
[ 11.383135] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.388593] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.401373] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 11.407166] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 11.413315] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 11.418689] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 74,64
bit host data width,64 deep fifo
[ 11.435503] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517
[ 11.438618] usb 2-1: new high-speed USB device number 2 using exynos-ehci
[ 11.451205] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.461347] alloc_contig_range: [afc45, afc46) PFNs busy
[ 11.470779] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.475867] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.479496] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0
[ 11.487646] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.498989] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 11.504821] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 11.509618] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[ 11.516769] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 11.522193] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 74,64
bit host data width,64 deep fifo
[ 11.525679] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[ 11.531049] vdd_ldo15: Bringing 3300000uV into 3100000-3100000uV
[ 11.541477] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[ 11.567415] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610
[ 11.571115] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req
400000Hz, actual 396825HZ div = 63)
[ 11.582169] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 11.582682] dwmmc_exynos 12220000.mmc: 1 slots initialized
[ 11.584725] exynos-tmu 10060000.tmu: More trip points than supported
by this TMU.
[ 11.584735] exynos-tmu 10060000.tmu: 2 trip points should be
configured in polling mode.
[ 11.605350] OF: graph: no port node found in /soc/hdmi@14530000
[ 11.609196] [drm] Exynos DRM: using 14450000.mixer device for DMA
mapping operations
[ 11.609642] exynos-drm exynos-drm: bound 14450000.mixer (ops
mixer_component_ops [exynosdrm])
[ 11.610209] exynos-drm exynos-drm: bound 14530000.hdmi (ops
hdmi_component_ops [exynosdrm])
[ 11.610690] exynos-drm exynos-drm: bound exynos-drm-vidi (ops
vidi_component_ops [exynosdrm])
[ 11.610698] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.610702] [drm] No driver support for vblank timestamp query.
[ 11.661617] usb 2-1: Product: USB2.0 Hub
[ 11.665567] usb 2-1: Manufacturer: GenesysLogic
G[ 11.671779] hub 2-1:1.0: USB hub found
[ 11.674612] hub 2-1:1.0: 4 ports detected
[ 11.747649] Console: switching to colour frame buffer device 240x67
[ 11.820614] exynos-drm exynos-drm: fb0: frame buffer device
[ 11.827658] [drm] Initialized exynos 1.0.0 20110530 for exynos-drm on
minor 0
[ 11.851995] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.865009] usb_phy_generic usb_phy_generic.0.auto:
usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[ 11.865082] alloc_contig_range: [afc48, afc49) PFNs busy
[ 11.865206] alloc_contig_range: [afc49, afc4a) PFNs busy
[ 11.865337] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.865361] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.865408] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.867852] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[ 11.867997] rtc rtc1: invalid alarm value: 1900-1-2 0:0:0
[ 11.875339] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1
[ 11.877116] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.884686] alloc_contig_range: [afc48, afc49) PFNs busy
[ 11.884798] alloc_contig_range: [afc49, afc4a) PFNs busy
[ 11.885084] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.885101] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.885154] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.963312] usb_phy_generic usb_phy_generic.1.auto:
usb_phy_generic.1.auto supply vcc not found, using dummy regulator
[ 11.963599] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.963737] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.963754] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.963802] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.966252] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.966363] alloc_contig_range: [afc4a, afc4b) PFNs busy
[ 11.966491] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.966507] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.966638] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.980502] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 11.982673] xhci-hcd xhci-hcd.4.auto: new USB bus registered,
assigned bus number 3
[ 11.986615] usb 2-1.3: new full-speed USB device number 3 using
exynos-ehci
[ 11.987376] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220f04c hci
version 0x100 quirks 0x02010010
[ 11.987454] xhci-hcd xhci-hcd.4.auto: irq 135, io mem 0x12000000
[ 11.987860] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.987870] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 11.987877] usb usb3: Product: xHCI Host Controller
[ 11.987885] usb usb3: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 11.987892] usb usb3: SerialNumber: xhci-hcd.4.auto
[ 11.988992] hub 3-0:1.0: USB hub found
[ 11.989065] hub 3-0:1.0: 1 port detected
[ 11.990696] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 11.991013] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.991298] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.991314] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.991360] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.991949] xhci-hcd xhci-hcd.4.auto: new USB bus registered,
assigned bus number 4
[ 11.992159] usb usb4: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 11.992406] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 11.992416] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 11.992424] usb usb4: Product: xHCI Host Controller
[ 11.992431] usb usb4: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 11.992438] usb usb4: SerialNumber: xhci-hcd.4.auto
[ 11.993920] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.994030] alloc_contig_range: [afc51, afc52) PFNs busy
[ 11.994160] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.994177] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.994223] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.995914] hub 4-0:1.0: USB hub found
[ 11.995995] hub 4-0:1.0: 1 port detected
[ 11.997943] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.998119] alloc_contig_range: [afc51, afc52) PFNs busy
[ 11.998161] alloc_contig_range: [afc52, afc53) PFNs busy
[ 11.998276] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.998292] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.998336] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.000903] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 12.000950] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.001058] alloc_contig_range: [afc51, afc52) PFNs busy
[ 12.001096] alloc_contig_range: [afc52, afc53) PFNs busy
[ 12.001127] alloc_contig_range: [afc53, afc54) PFNs busy
[ 12.001366] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.001384] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.001395] xhci-hcd xhci-hcd.5.auto: new USB bus registered,
assigned bus number 5
[ 12.001427] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.004064] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.004200] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.004216] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.004257] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.004679] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220f04c hci
version 0x100 quirks 0x02010010
[ 12.004748] xhci-hcd xhci-hcd.5.auto: irq 136, io mem 0x12400000
[ 12.005115] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 12.005125] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 12.005133] usb usb5: Product: xHCI Host Controller
[ 12.005141] usb usb5: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 12.005149] usb usb5: SerialNumber: xhci-hcd.5.auto
[ 12.006308] hub 5-0:1.0: USB hub found
[ 12.006382] hub 5-0:1.0: 1 port detected
[ 12.008113] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 12.008451] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.008740] xhci-hcd xhci-hcd.5.auto: new USB bus registered,
assigned bus number 6
[ 12.008944] usb usb6: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 12.008985] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.009002] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.009046] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.009187] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 12.009197] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 12.009205] usb usb6: Product: xHCI Host Controller
[ 12.009213] usb usb6: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 12.009220] usb usb6: SerialNumber: xhci-hcd.5.auto
[ 12.011656] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.011761] alloc_contig_range: [afc52, afc53) PFNs busy
[ 12.011893] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.011909] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.011952] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.012142] hub 6-0:1.0: USB hub found
[ 12.012220] hub 6-0:1.0: 1 port detected
[ 12.015575] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.015755] alloc_contig_range: [afc52, afc53) PFNs busy
[ 12.016040] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.016057] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.016104] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.071382] usb 2-1.3: New USB device found, idVendor=046d,
idProduct=c52b
[ 12.071392] usb 2-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 12.071400] usb 2-1.3: Product: USB Receiver
[ 12.071407] usb 2-1.3: Manufacturer: Logitech
[ 12.076383] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.077209] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.077227] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.077272] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.080608] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.080794] alloc_contig_range: [afc52, afc53) PFNs busy
[ 12.081056] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.081075] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.081121] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.084350] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.084837] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.084855] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.084901] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.127822] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0:
USB HID v1.11 Device [Logitech USB Receiver] on usb-1212
[ 12.159578] usb 2-1.4: new full-speed USB device number 4 using
exynos-ehci
[ 12.233213] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.233635] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.233650] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.233697] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.255260] usb 2-1.4: New USB device found, idVendor=046d,
idProduct=c52b
[ 12.255271] usb 2-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 12.255279] usb 2-1.4: Product: USB Receiver
[ 12.255286] usb 2-1.4: Manufacturer: Logitech
[ 12.261591] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.261772] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 12.261912] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.261928] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.261973] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.263344] input: Logitech K360 as
/devices/platform/soc/12110000.usb/usb2/2-1/2-1.3/2-1.3:1.2/0003:046D:C52B.0003/0003:046D0
[ 12.266137] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.266243] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 12.266278] alloc_contig_range: [afc5a, afc5b) PFNs busy
[ 12.266392] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.266408] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.266453] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.270938] logitech-hidpp-device 0003:046D:4004.0004: input,hidraw1:
USB HID v1.11 Keyboard [Logitech K360] on usb-12110000.1
[ 12.272504] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.272858] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 12.272905] alloc_contig_range: [afc5a, afc5b) PFNs busy
[ 12.272938] alloc_contig_range: [afc5b, afc5c) PFNs busy
[ 12.273073] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.273088] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.273131] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.274388] logitech-djreceiver 0003:046D:C52B.0007: hiddev0,hidraw2:
USB HID v1.11 Device [Logitech USB Receiver] on usb-1212
[ 12.380508] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.380956] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.380972] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.381032] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.388133] input: Logitech M325 as
/devices/platform/soc/12110000.usb/usb2/2-1/2-1.4/2-1.4:1.2/0003:046D:C52B.0007/0003:046D1
[ 12.389710] logitech-hidpp-device 0003:046D:400A.0008: input,hidraw3:
USB HID v1.11 Mouse [Logitech M325] on usb-12110000.usb1
[ 12.391278] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.391465] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 12.391799] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.391816] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.391862] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 14.262990] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 14.264734] usb_phy_generic usb_phy_generic.2.auto:
usb_phy_generic.2.auto supply vcc not found, using dummy regulator
[ 14.264921] usb_phy_generic usb_phy_generic.3.auto:
usb_phy_generic.3.auto supply vcc not found, using dummy regulator
[ 14.323703] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 14.340019] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 14.357376] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 14.360376] usb usb3-port1: connect-debounce failed
[ 14.391441] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 14.413995] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 14.432100] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 14.450944] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 14.467654] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 15.895324] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 15.914967] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[ 15.934255] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6
Num_Peri-16 Num_Events-6
[ 15.955078] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 15.973101] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 15.989498] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 16.007364] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 16.023737] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 154.826300] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 155.465493] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 156.047171] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 156.628264] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 157.210699] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 157.792716] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 158.375165] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 158.956997] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 159.539328] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 160.121374] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 160.703325] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 161.285883] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 161.867962] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 162.450719] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 163.033505] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 163.614266] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 164.195758] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 164.778469] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 165.360286] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 165.941310] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 166.523524] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 167.104869] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 167.688130] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 168.270306] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 168.852315] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 169.434322] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 170.016732] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 170.602207] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 171.185517] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 171.768552] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 172.350236] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 172.932299] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 173.513380] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 174.095387] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 174.677335] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 175.259292] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 175.839862] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 176.427267] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 177.009588] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 177.592175] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 178.174540] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 178.757416] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 179.340333] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 179.923291] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 180.505974] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 181.088774] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 181.671254] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 182.252978] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 182.834583] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 183.418151] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 184.001124] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 184.584265] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 185.166858] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 185.751389] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 186.332845] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 186.916558] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 187.498291] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 188.083535] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 188.666901] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 189.248788] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 189.832126] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 190.414984] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 190.999165] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 191.583350] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 192.166411] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 192.749409] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 193.331914] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 193.914324] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 194.496689] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 195.078933] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 195.661887] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 196.246104] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 196.828598] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 197.410332] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 197.992727] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 198.575369] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 199.157259] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 199.739920] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 200.322926] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 200.905482] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 201.487460] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 202.069268] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 202.651906] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 203.234337] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 203.815857] dracut-initqueue[493]: Warning: dracut-initqueue timeout
- starting timeout scripts
On 08/22/2017 01:35 PM, Dennis Gilmore wrote:
El mar, 15-08-2017 a las 17:25 -0700, Stewart Samuels escribió:
> Ok. The u-boot issue was my mistake. I was trying to use the
> /usr/share/uboot/odroid u-boot files instead of the
> /usr/share/uboot/odroid-xu3 files. Now I am getting output to the
> serial console and the system begins the boot process as expected.
> However, it hangs in the kernel seemingly trying to do something
> with
> the network. Anyone have any ideas as to what I can try to get past
> this? Following is my serial console output:
>
try adding cpuide.off=1 to the boot line and see if it boots okay then.
Dennis
5:18 p.m.
El mar, 22-08-2017 a las 15:14 -0700, Stewart Samuels escribió:
Hello Dennis,
The parameter you provided me below was incorrect (spelling error).
I used cpuidle.off=1 and the system now boot much further, but
eventually goes into a:
> dracut-initqueue[493]: Warning: dracut-initqueue timeout - starting
> timeout scripts
loop and never completes the boot process.
Any other suggestions? See the output from the serial port that
follows:
-------------------------------------------------------------------
sorry for the typo I meant cpuidle.off=1 can you confirm that the uuid
of the root filesystem is still 11cf09b5-43b2-4588-969d-550b4e2af055
and has not ben changed?
Dennis
5:46 p.m.
Dennis,
I have confirmed the UUID is still 11cf09b5-43b2-4588-969d-550b4e2af05.
See output from my Ubuntu login that follows. Our root partition here
shows up as /dev/sda4.
Stewart
------------------------------------------------------------------------------------------------------
Ubuntu 16.04.2 LTS odroid ttySAC2
odroid login:
Password:
Login incorrect
odroid login: odroid
Password:
Welcome to Ubuntu 16.04.2 LTS (GNU/Linux 4.9.27-35 armv7l)
* Documentation: https://help.ubuntu.com
* Management: https://landscape.canonical.com
* Support: https://ubuntu.com/advantage
131 packages can be updated.
1 update is a security update.
The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.
odroid@odroid:~$ blkid
/dev/mmcblk1p1: SEC_TYPE="msdos" LABEL="boot"
UUID="52AA-6867"
TYPE="vfat" PARTUUID="3cedfd53-01"
/dev/mmcblk1p2: LABEL="rootfs"
UUID="e139ce78-9841-40fe-8823-96a304a09859" TYPE="ext4"
PARTUUID="3cedfd53-02"
/dev/sda1: UUID="1E1E-EBA6" TYPE="vfat"
PARTUUID="3cedfd53-01"
/dev/sda2: LABEL="_boot" UUID="9bef0c7b-ced7-453b-bb4f-5072d3810d44"
TYPE="ext4" PARTUUID="3cedfd53-02"
/dev/sda3: UUID="8753dccc-b774-4213-82fc-6941ced77673" TYPE="swap"
PARTUUID="3cedfd53-03"
/dev/sda4: LABEL="_root" UUID="11cf09b5-43b2-4588-969d-550b4e2af055"
TYPE="ext4" PARTUUID="3cedfd53-04"
odroid@odroid:~$
------------------------------------------------------------------------------------------------------
On 08/22/2017 03:18 PM, Dennis Gilmore wrote:
El mar, 22-08-2017 a las 15:14 -0700, Stewart Samuels escribió:
> Hello Dennis,
>
> The parameter you provided me below was incorrect (spelling error).
> I used cpuidle.off=1 and the system now boot much further, but
> eventually goes into a:
>
>> dracut-initqueue[493]: Warning: dracut-initqueue timeout - starting
>> timeout scripts
> loop and never completes the boot process.
>
> Any other suggestions? See the output from the serial port that
> follows:
>
> -------------------------------------------------------------------
>
sorry for the typo I meant cpuidle.off=1 can you confirm that the uuid
of the root filesystem is still 11cf09b5-43b2-4588-969d-550b4e2af055
and has not ben changed?
Dennis
6:03 p.m.
Dennis,
I let the system try to boot and gave it more time with the dracut
messages. It dumps me into the dracut login via emergency mode looking
for the root partition it seems. It cannot find the system drive via
the UUID that I showed in my last email is the UUID for the root
partition. See the output on my serial console now. What do you suggest?
Stewart
--------------------------------------------------------------
.
.
.
[ 221.513878] dracut-initqueue[484]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.098261] dracut-initqueue[484]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.681174] dracut-initqueue[484]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.683247] dracut-initqueue[484]: Warning: Could not boot.
[ 224.157646] dracut-initqueue[484]: Warning:
/dev/disk/by-uuid/11cf09b5-43b2-4588-969d-550b4e2af055 does not exist
Starting Setup Virtual Console...
[ OK 224.359135] audit: type=1130 audit(1498600128.720:15): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit'
m] Started Setup Virtual Console[ 224.384023] audit: type=1131
audit(1498600128.720:16): pid=1 uid=0 auid=4294967295 ses=429496'
.
Starting Dracut Emergency Shell...
[ 224.501053] audit: type=1131 audit(1498600128.862:17): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymo'
Warning: /dev/disk/by-uuid/11cf09b5-43b2-4588-969d-550b4e2af055 does not
exist
Generating "/run/initramfs/rdsosreport.txt"
Entering emergency mode. Exit the shell to continue.
Type "journalctl" to view system logs.
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick
or /boot
after mounting them and attach it to a bug report.
dracut:/#
--------------------------------------------------------------
On 08/22/2017 03:46 PM, Stewart Samuels wrote:
Dennis,
I have confirmed the UUID is still 11cf09b5-43b2-4588-969d-550b4e2af05.
See output from my Ubuntu login that follows. Our root partition here
shows up as /dev/sda4.
Stewart
------------------------------------------------------------------------------------------------------
Ubuntu 16.04.2 LTS odroid ttySAC2
odroid login:
Password:
Login incorrect
odroid login: odroid
Password:
Welcome to Ubuntu 16.04.2 LTS (GNU/Linux 4.9.27-35 armv7l)
* Documentation: https://help.ubuntu.com
* Management: https://landscape.canonical.com
* Support: https://ubuntu.com/advantage
131 packages can be updated.
1 update is a security update.
The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.
odroid@odroid:~$ blkid
/dev/mmcblk1p1: SEC_TYPE="msdos" LABEL="boot"
UUID="52AA-6867"
TYPE="vfat" PARTUUID="3cedfd53-01"
/dev/mmcblk1p2: LABEL="rootfs"
UUID="e139ce78-9841-40fe-8823-96a304a09859" TYPE="ext4"
PARTUUID="3cedfd53-02"
/dev/sda1: UUID="1E1E-EBA6" TYPE="vfat"
PARTUUID="3cedfd53-01"
/dev/sda2: LABEL="_boot" UUID="9bef0c7b-ced7-453b-bb4f-5072d3810d44"
TYPE="ext4" PARTUUID="3cedfd53-02"
/dev/sda3: UUID="8753dccc-b774-4213-82fc-6941ced77673" TYPE="swap"
PARTUUID="3cedfd53-03"
/dev/sda4: LABEL="_root" UUID="11cf09b5-43b2-4588-969d-550b4e2af055"
TYPE="ext4" PARTUUID="3cedfd53-04"
odroid@odroid:~$
------------------------------------------------------------------------------------------------------
On 08/22/2017 03:18 PM, Dennis Gilmore wrote:
> El mar, 22-08-2017 a las 15:14 -0700, Stewart Samuels escribió:
>> Hello Dennis,
>>
>> The parameter you provided me below was incorrect (spelling error).
>> I used cpuidle.off=1 and the system now boot much further, but
>> eventually goes into a:
>>
>>> dracut-initqueue[493]: Warning: dracut-initqueue timeout - starting
>>> timeout scripts
>> loop and never completes the boot process.
>>
>> Any other suggestions? See the output from the serial port that
>> follows:
>>
>> -------------------------------------------------------------------
>>
> sorry for the typo I meant cpuidle.off=1 can you confirm that the uuid
> of the root filesystem is still 11cf09b5-43b2-4588-969d-550b4e2af055
> and has not ben changed?
>
> Dennis
6:06 p.m.
What is the output of "cat /proc/partitions" next step would be making sure the
right modules for the block storage are loaded.
Dennis
On 22 August 2017 6:03:52 pm GMT-05:00, Stewart Samuels <searider74(a)gmail.com>
wrote:
Dennis,
I let the system try to boot and gave it more time with the dracut
messages. It dumps me into the dracut login via emergency mode looking
for the root partition it seems. It cannot find the system drive via
the UUID that I showed in my last email is the UUID for the root
partition. See the output on my serial console now. What do you
suggest?
Stewart
--------------------------------------------------------------
.
.
.
[ 221.513878] dracut-initqueue[484]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.098261] dracut-initqueue[484]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.681174] dracut-initqueue[484]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.683247] dracut-initqueue[484]: Warning: Could not boot.
[ 224.157646] dracut-initqueue[484]: Warning:
/dev/disk/by-uuid/11cf09b5-43b2-4588-969d-550b4e2af055 does not exist
Starting Setup Virtual Console...
[ OK 224.359135] audit: type=1130 audit(1498600128.720:15): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit'
m] Started Setup Virtual Console[ 224.384023] audit: type=1131
audit(1498600128.720:16): pid=1 uid=0 auid=4294967295 ses=429496'
.
Starting Dracut Emergency Shell...
[ 224.501053] audit: type=1131 audit(1498600128.862:17): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymo'
Warning: /dev/disk/by-uuid/11cf09b5-43b2-4588-969d-550b4e2af055 does
not
exist
Generating "/run/initramfs/rdsosreport.txt"
Entering emergency mode. Exit the shell to continue.
Type "journalctl" to view system logs.
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick
or /boot
after mounting them and attach it to a bug report.
dracut:/#
--------------------------------------------------------------
On 08/22/2017 03:46 PM, Stewart Samuels wrote:
> Dennis,
>
> I have confirmed the UUID is still
11cf09b5-43b2-4588-969d-550b4e2af05.
>
> See output from my Ubuntu login that follows. Our root partition
here
> shows up as /dev/sda4.
>
> Stewart
>
>
------------------------------------------------------------------------------------------------------
>
>
>
> Ubuntu 16.04.2 LTS odroid ttySAC2
>
> odroid login:
> Password:
>
> Login incorrect
> odroid login: odroid
> Password:
> Welcome to Ubuntu 16.04.2 LTS (GNU/Linux 4.9.27-35 armv7l)
>
> * Documentation: https://help.ubuntu.com
> * Management: https://landscape.canonical.com
> * Support: https://ubuntu.com/advantage
>
> 131 packages can be updated.
> 1 update is a security update.
>
>
> The programs included with the Ubuntu system are free software;
> the exact distribution terms for each program are described in the
> individual files in /usr/share/doc/*/copyright.
>
> Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
> applicable law.
>
> odroid@odroid:~$ blkid
> /dev/mmcblk1p1: SEC_TYPE="msdos" LABEL="boot"
UUID="52AA-6867"
> TYPE="vfat" PARTUUID="3cedfd53-01"
> /dev/mmcblk1p2: LABEL="rootfs"
> UUID="e139ce78-9841-40fe-8823-96a304a09859" TYPE="ext4"
> PARTUUID="3cedfd53-02"
> /dev/sda1: UUID="1E1E-EBA6" TYPE="vfat"
PARTUUID="3cedfd53-01"
> /dev/sda2: LABEL="_boot"
UUID="9bef0c7b-ced7-453b-bb4f-5072d3810d44"
> TYPE="ext4" PARTUUID="3cedfd53-02"
> /dev/sda3: UUID="8753dccc-b774-4213-82fc-6941ced77673"
TYPE="swap"
> PARTUUID="3cedfd53-03"
> /dev/sda4: LABEL="_root"
UUID="11cf09b5-43b2-4588-969d-550b4e2af055"
> TYPE="ext4" PARTUUID="3cedfd53-04"
> odroid@odroid:~$
>
>
>
>
------------------------------------------------------------------------------------------------------
>
>
>
> On 08/22/2017 03:18 PM, Dennis Gilmore wrote:
>> El mar, 22-08-2017 a las 15:14 -0700, Stewart Samuels escribió:
>>> Hello Dennis,
>>>
>>> The parameter you provided me below was incorrect (spelling error).
>>> I used cpuidle.off=1 and the system now boot much further, but
>>> eventually goes into a:
>>>
>>>> dracut-initqueue[493]: Warning: dracut-initqueue timeout -
starting
>>>> timeout scripts
>>> loop and never completes the boot process.
>>>
>>> Any other suggestions? See the output from the serial port that
>>> follows:
>>>
>>> -------------------------------------------------------------------
>>>
>> sorry for the typo I meant cpuidle.off=1 can you confirm that the
uuid
>> of the root filesystem is still 11cf09b5-43b2-4588-969d-550b4e2af055
>> and has not ben changed?
>>
>> Dennis
>
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
6:12 p.m.
cat /proc/partitions in dracut returns no output other than the dracut
prompt. An ls -l command shows listing output: See the following:
---------------------------------------------------------------------
dracut:/# pwd
/
dracut:/# cat /proc/partitions
dracut:/# ls -l
total 12
lrwxrwxrwx 1 root root 7 Jun 22 13:42 bin -> usr/bin
drwxr-xr-x 13 root root 3900 Jun 27 21:45 dev
-rw-r--r-- 1 root root 508 Jun 27 21:45 dracut-state.sh
-rw-r--r-- 1 root root 2 Jun 22 13:42 early_cpio
drwxr-xr-x 11 root root 0 Jun 27 21:48 etc
lrwxrwxrwx 1 root root 23 Jun 22 13:42 init -> usr/lib/systemd/systemd
drwxr-xr-x 3 root root 0 Jun 22 13:42 kernel
lrwxrwxrwx 1 root root 7 Jun 22 13:42 lib -> usr/lib
dr-xr-xr-x 125 root root 0 Jan 1 1970 proc
drwxr-xr-x 2 root root 0 Jun 22 13:42 root
drwxr-xr-x 11 root root 260 Jun 27 21:45 run
lrwxrwxrwx 1 root root 8 Jun 22 13:42 sbin -> usr/sbin
-rwxr-xr-x 1 root root 3113 Jun 22 13:41 shutdown
dr-xr-xr-x 12 root root 0 Jan 1 1970 sys
drwxr-xr-x 2 root root 0 Jun 22 13:42 sysroot
drwxr-xr-x 2 root root 0 Jun 22 13:42 tmp
drwxr-xr-x 6 root root 0 Jun 22 13:42 usr
drwxr-xr-x 4 root root 0 Jun 27 21:45 var
dracut:/#
---------------------------------------------------------------------
On 08/22/2017 04:06 PM, dennis(a)ausil.us wrote:
What is the output of "cat /proc/partitions" next step
would be making
sure the right modules for the block storage are loaded.
Dennis
On 22 August 2017 6:03:52 pm GMT-05:00, Stewart Samuels
<searider74(a)gmail.com> wrote:
Dennis,
I let the system try to boot and gave it more time with the dracut
messages. It dumps me into the dracut login via emergency mode looking
for the root partition it seems. It cannot find the system drive via
the UUID that I showed in my last email is the UUID for the root
partition. See the output on my serial console now. What do you suggest?
Stewart
------------------------------------------------------------------------
.
.
.
[ 221.513878] dracut-initqueue[484]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.098261] dracut-initqueue[484]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.681174] dracut-initqueue[484]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.683247] dracut-initqueue[484]: Warning: Could not boot.
[ 224.157646] dracut-initqueue[484]: Warning:
/dev/disk/by-uuid/11cf09b5-43b2-4588-969d-550b4e2af055 does not exist
Starting Setup Virtual Console...
[ OK 224.359135] audit: type=1130 audit(1498600128.720:15): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit'
m] Started Setup Virtual Console[ 224.384023] audit: type=1131
audit(1498600128.720:16): pid=1 uid=0 auid=4294967295 ses=429496'
.
Starting Dracut Emergency Shell...
[ 224.501053] audit: type=1131 audit(1498600128.862:17): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymo'
Warning: /dev/disk/by-uuid/11cf09b5-43b2-4588-969d-550b4e2af055 does not
exist
Generating "/run/initramfs/rdsosreport.txt"
Entering emergency mode. Exit the shell to continue.
Type "journalctl" to view system logs.
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick
or /boot
after mounting them and attach it to a bug report.
dracut:/#
------------------------------------------------------------------------
On 08/22/2017 03:46 PM, Stewart Samuels wrote:
Dennis, I have confirmed the UUID is still
11cf09b5-43b2-4588-969d-550b4e2af05. See output from my Ubuntu
login that follows. Our root partition here shows up as
/dev/sda4. Stewart
------------------------------------------------------------------------
Ubuntu 16.04.2 LTS odroid ttySAC2 odroid login: Password:
Login incorrect odroid login: odroid Password: Welcome to
Ubuntu 16.04.2 LTS (GNU/Linux 4.9.27-35 armv7l) *
Documentation: https://help.ubuntu.com * Management:
https://landscape.canonical.com * Support:
https://ubuntu.com/advantage 131 packages can be updated. 1
update is a security update. The programs included with the
Ubuntu system are free software; the exact distribution terms
for each program are described in the individual files in
/usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO
WARRANTY, to the extent permitted by applicable law.
odroid@odroid:~$ blkid /dev/mmcblk1p1: SEC_TYPE="msdos"
LABEL="boot" UUID="52AA-6867" TYPE="vfat"
PARTUUID="3cedfd53-01" /dev/mmcblk1p2: LABEL="rootfs"
UUID="e139ce78-9841-40fe-8823-96a304a09859" TYPE="ext4"
PARTUUID="3cedfd53-02" /dev/sda1: UUID="1E1E-EBA6"
TYPE="vfat"
PARTUUID="3cedfd53-01" /dev/sda2: LABEL="_boot"
UUID="9bef0c7b-ced7-453b-bb4f-5072d3810d44" TYPE="ext4"
PARTUUID="3cedfd53-02" /dev/sda3:
UUID="8753dccc-b774-4213-82fc-6941ced77673" TYPE="swap"
PARTUUID="3cedfd53-03" /dev/sda4: LABEL="_root"
UUID="11cf09b5-43b2-4588-969d-550b4e2af055" TYPE="ext4"
PARTUUID="3cedfd53-04" odroid@odroid:~$
------------------------------------------------------------------------
On 08/22/2017 03:18 PM, Dennis Gilmore wrote:
El mar, 22-08-2017 a las 15:14 -0700, Stewart Samuels
escribió:
Hello Dennis, The parameter you provided me below was
incorrect (spelling error). I used cpuidle.off
<http://cpuidle.off>=1 and the system now boot much
further, but eventually goes into a:
dracut-initqueue[493]: Warning: dracut-initqueue
timeout - starting timeout scripts
loop and never completes the boot process. Any other
suggestions? See the output from the serial port that
follows:
------------------------------------------------------------------------
sorry for the typo I meant cpuidle.off
<http://cpuidle.off>=1 can you confirm that the uuid of
the root filesystem is still
11cf09b5-43b2-4588-969d-550b4e2af055 and has not ben
changed? Dennis
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
6:17 p.m.
Here is the output from cat /proc/modules:
-----------------------------------------------------------------
dracut:/#
dracut:/# cat /proc/modules
hid_logitech_hidpp 24576 0 - Live 0xbf461000
xhci_plat_hcd 16384 0 - Live 0xbf44f000
dwc3 110592 0 - Live 0xbf407000
ulpi 16384 1 dwc3, Live 0xbf3f7000
udc_core 49152 1 dwc3, Live 0xbf3db000
phy_generic 16384 0 - Live 0xbf3c3000
hid_logitech_dj 20480 0 - Live 0xbf3a5000
clk_s2mps11 16384 1 - Live 0xbf39d000
s2mps11 49152 14 - Live 0xbf38d000
rtc_s5m 20480 0 - Live 0xbf383000
dwc3_exynos 16384 0 - Live 0xbf373000
phy_exynos_mipi_video 16384 0 - Live 0xbf36b000
phy_exynos_dp_video 16384 0 - Live 0xbf363000
pl330 28672 0 - Live 0xbf33f000
clk_exynos_audss 16384 0 - Live 0xbf301000
pwm_samsung 16384 0 - Live 0xbf24f000
i2c_exynos5 16384 0 - Live 0xbf247000
i2c_s3c2410 20480 0 - Live 0xbf23d000
dw_mmc_exynos 16384 0 - Live 0xbf235000
dw_mmc_pltfm 16384 1 dw_mmc_exynos, Live 0xbf1ff000
exynosdrm 167936 1 - Live 0xbf1c9000
dw_mmc 36864 2 dw_mmc_exynos,dw_mmc_pltfm, Live 0xbf1ba000
analogix_dp 32768 1 exynosdrm, Live 0xbf1ad000
mmc_core 135168 2 dw_mmc_exynos,dw_mmc, Live 0xbf17f000
ohci_exynos 16384 0 - Live 0xbf176000
phy_exynos_usb2 20480 2 - Live 0xbf16c000
drm_kms_helper 143360 2 exynosdrm,analogix_dp, Live 0xbf13a000
phy_exynos5_usbdrd 16384 4 - Live 0xbf132000
syscopyarea 16384 1 drm_kms_helper, Live 0xbf12b000
sysfillrect 16384 1 drm_kms_helper, Live 0xbf124000
sysimgblt 16384 1 drm_kms_helper, Live 0xbf11d000
ehci_exynos 16384 0 - Live 0xbf114000
fb_sys_fops 16384 1 drm_kms_helper, Live 0xbf10d000
drm 327680 4 exynosdrm,analogix_dp,drm_kms_helper, Live 0xbf0a2000
rtc_s3c 20480 0 - Live 0xbf098000
s5p_sss 16384 0 - Live 0xbf08f000
sunrpc 323584 1 - Live 0xbf022000
scsi_transport_iscsi 86016 1 - Live 0xbf000000
dracut:/#
-----------------------------------------------------------------
On 08/22/2017 04:06 PM, dennis(a)ausil.us wrote:
What is the output of "cat /proc/partitions" next step
would be making
sure the right modules for the block storage are loaded.
Dennis
On 22 August 2017 6:03:52 pm GMT-05:00, Stewart Samuels
<searider74(a)gmail.com> wrote:
Dennis,
I let the system try to boot and gave it more time with the dracut
messages. It dumps me into the dracut login via emergency mode looking
for the root partition it seems. It cannot find the system drive via
the UUID that I showed in my last email is the UUID for the root
partition. See the output on my serial console now. What do you suggest?
Stewart
------------------------------------------------------------------------
.
.
.
[ 221.513878] dracut-initqueue[484]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.098261] dracut-initqueue[484]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.681174] dracut-initqueue[484]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.683247] dracut-initqueue[484]: Warning: Could not boot.
[ 224.157646] dracut-initqueue[484]: Warning:
/dev/disk/by-uuid/11cf09b5-43b2-4588-969d-550b4e2af055 does not exist
Starting Setup Virtual Console...
[ OK 224.359135] audit: type=1130 audit(1498600128.720:15): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit'
m] Started Setup Virtual Console[ 224.384023] audit: type=1131
audit(1498600128.720:16): pid=1 uid=0 auid=4294967295 ses=429496'
.
Starting Dracut Emergency Shell...
[ 224.501053] audit: type=1131 audit(1498600128.862:17): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymo'
Warning: /dev/disk/by-uuid/11cf09b5-43b2-4588-969d-550b4e2af055 does not
exist
Generating "/run/initramfs/rdsosreport.txt"
Entering emergency mode. Exit the shell to continue.
Type "journalctl" to view system logs.
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick
or /boot
after mounting them and attach it to a bug report.
dracut:/#
------------------------------------------------------------------------
On 08/22/2017 03:46 PM, Stewart Samuels wrote:
Dennis, I have confirmed the UUID is still
11cf09b5-43b2-4588-969d-550b4e2af05. See output from my Ubuntu
login that follows. Our root partition here shows up as
/dev/sda4. Stewart
------------------------------------------------------------------------
Ubuntu 16.04.2 LTS odroid ttySAC2 odroid login: Password:
Login incorrect odroid login: odroid Password: Welcome to
Ubuntu 16.04.2 LTS (GNU/Linux 4.9.27-35 armv7l) *
Documentation: https://help.ubuntu.com * Management:
https://landscape.canonical.com * Support:
https://ubuntu.com/advantage 131 packages can be updated. 1
update is a security update. The programs included with the
Ubuntu system are free software; the exact distribution terms
for each program are described in the individual files in
/usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO
WARRANTY, to the extent permitted by applicable law.
odroid@odroid:~$ blkid /dev/mmcblk1p1: SEC_TYPE="msdos"
LABEL="boot" UUID="52AA-6867" TYPE="vfat"
PARTUUID="3cedfd53-01" /dev/mmcblk1p2: LABEL="rootfs"
UUID="e139ce78-9841-40fe-8823-96a304a09859" TYPE="ext4"
PARTUUID="3cedfd53-02" /dev/sda1: UUID="1E1E-EBA6"
TYPE="vfat"
PARTUUID="3cedfd53-01" /dev/sda2: LABEL="_boot"
UUID="9bef0c7b-ced7-453b-bb4f-5072d3810d44" TYPE="ext4"
PARTUUID="3cedfd53-02" /dev/sda3:
UUID="8753dccc-b774-4213-82fc-6941ced77673" TYPE="swap"
PARTUUID="3cedfd53-03" /dev/sda4: LABEL="_root"
UUID="11cf09b5-43b2-4588-969d-550b4e2af055" TYPE="ext4"
PARTUUID="3cedfd53-04" odroid@odroid:~$
------------------------------------------------------------------------
On 08/22/2017 03:18 PM, Dennis Gilmore wrote:
El mar, 22-08-2017 a las 15:14 -0700, Stewart Samuels
escribió:
Hello Dennis, The parameter you provided me below was
incorrect (spelling error). I used cpuidle.off
<http://cpuidle.off>=1 and the system now boot much
further, but eventually goes into a:
dracut-initqueue[493]: Warning: dracut-initqueue
timeout - starting timeout scripts
loop and never completes the boot process. Any other
suggestions? See the output from the serial port that
follows:
------------------------------------------------------------------------
sorry for the typo I meant cpuidle.off
<http://cpuidle.off>=1 can you confirm that the uuid of
the root filesystem is still
11cf09b5-43b2-4588-969d-550b4e2af055 and has not ben
changed? Dennis
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
6:24 p.m.
It does not look like the USB controllers module is present, I have run fedora from a
micro SD card in my tests. You could try "modprobe usb-storage" and try get the
USB modules loaded. From another arm system you should be able to rebuild the initrd with
all the USB modules if needed.
Dennis
Dennis
On 22 August 2017 6:17:13 pm GMT-05:00, Stewart Samuels <searider74(a)gmail.com>
wrote:
Here is the output from cat /proc/modules:
-----------------------------------------------------------------
dracut:/#
dracut:/# cat /proc/modules
hid_logitech_hidpp 24576 0 - Live 0xbf461000
xhci_plat_hcd 16384 0 - Live 0xbf44f000
dwc3 110592 0 - Live 0xbf407000
ulpi 16384 1 dwc3, Live 0xbf3f7000
udc_core 49152 1 dwc3, Live 0xbf3db000
phy_generic 16384 0 - Live 0xbf3c3000
hid_logitech_dj 20480 0 - Live 0xbf3a5000
clk_s2mps11 16384 1 - Live 0xbf39d000
s2mps11 49152 14 - Live 0xbf38d000
rtc_s5m 20480 0 - Live 0xbf383000
dwc3_exynos 16384 0 - Live 0xbf373000
phy_exynos_mipi_video 16384 0 - Live 0xbf36b000
phy_exynos_dp_video 16384 0 - Live 0xbf363000
pl330 28672 0 - Live 0xbf33f000
clk_exynos_audss 16384 0 - Live 0xbf301000
pwm_samsung 16384 0 - Live 0xbf24f000
i2c_exynos5 16384 0 - Live 0xbf247000
i2c_s3c2410 20480 0 - Live 0xbf23d000
dw_mmc_exynos 16384 0 - Live 0xbf235000
dw_mmc_pltfm 16384 1 dw_mmc_exynos, Live 0xbf1ff000
exynosdrm 167936 1 - Live 0xbf1c9000
dw_mmc 36864 2 dw_mmc_exynos,dw_mmc_pltfm, Live 0xbf1ba000
analogix_dp 32768 1 exynosdrm, Live 0xbf1ad000
mmc_core 135168 2 dw_mmc_exynos,dw_mmc, Live 0xbf17f000
ohci_exynos 16384 0 - Live 0xbf176000
phy_exynos_usb2 20480 2 - Live 0xbf16c000
drm_kms_helper 143360 2 exynosdrm,analogix_dp, Live 0xbf13a000
phy_exynos5_usbdrd 16384 4 - Live 0xbf132000
syscopyarea 16384 1 drm_kms_helper, Live 0xbf12b000
sysfillrect 16384 1 drm_kms_helper, Live 0xbf124000
sysimgblt 16384 1 drm_kms_helper, Live 0xbf11d000
ehci_exynos 16384 0 - Live 0xbf114000
fb_sys_fops 16384 1 drm_kms_helper, Live 0xbf10d000
drm 327680 4 exynosdrm,analogix_dp,drm_kms_helper, Live 0xbf0a2000
rtc_s3c 20480 0 - Live 0xbf098000
s5p_sss 16384 0 - Live 0xbf08f000
sunrpc 323584 1 - Live 0xbf022000
scsi_transport_iscsi 86016 1 - Live 0xbf000000
dracut:/#
-----------------------------------------------------------------
On 08/22/2017 04:06 PM, dennis(a)ausil.us wrote:
> What is the output of "cat /proc/partitions" next step would be
making
> sure the right modules for the block storage are loaded.
>
> Dennis
>
> On 22 August 2017 6:03:52 pm GMT-05:00, Stewart Samuels
> <searider74(a)gmail.com> wrote:
>
> Dennis,
>
> I let the system try to boot and gave it more time with the
dracut
> messages. It dumps me into the dracut login via emergency mode
looking
> for the root partition it seems. It cannot find the system drive
via
> the UUID that I showed in my last email is the UUID for the root
> partition. See the output on my serial console now. What do you
suggest?
>
> Stewart
>
>
------------------------------------------------------------------------
>
> .
> .
> .
>
> [ 221.513878] dracut-initqueue[484]: Warning: dracut-initqueue
timeout
> - starting timeout scripts
> [ 222.098261] dracut-initqueue[484]: Warning: dracut-initqueue
timeout
> - starting timeout scripts
> [ 222.681174] dracut-initqueue[484]: Warning: dracut-initqueue
timeout
> - starting timeout scripts
> [ 222.683247] dracut-initqueue[484]: Warning: Could not boot.
> [ 224.157646] dracut-initqueue[484]: Warning:
> /dev/disk/by-uuid/11cf09b5-43b2-4588-969d-550b4e2af055 does not
exist
> Starting Setup Virtual Console...
> [ OK 224.359135] audit: type=1130 audit(1498600128.720:15):
pid=1
> uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit'
> m] Started Setup Virtual Console[ 224.384023] audit: type=1131
> audit(1498600128.720:16): pid=1 uid=0 auid=4294967295 ses=429496'
> .
> Starting Dracut Emergency Shell...
> [ 224.501053] audit: type=1131 audit(1498600128.862:17): pid=1
uid=0
> auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymo'
> Warning: /dev/disk/by-uuid/11cf09b5-43b2-4588-969d-550b4e2af055
does not
> exist
>
> Generating "/run/initramfs/rdsosreport.txt"
>
>
> Entering emergency mode. Exit the shell to continue.
> Type "journalctl" to view system logs.
> You might want to save "/run/initramfs/rdsosreport.txt" to a USB
stick
> or /boot
> after mounting them and attach it to a bug report.
>
>
> dracut:/#
>
>
>
>
------------------------------------------------------------------------
>
>
> On 08/22/2017 03:46 PM, Stewart Samuels wrote:
>
> Dennis, I have confirmed the UUID is still
> 11cf09b5-43b2-4588-969d-550b4e2af05. See output from my
Ubuntu
> login that follows. Our root partition here shows up as
> /dev/sda4. Stewart
>
------------------------------------------------------------------------
> Ubuntu 16.04.2 LTS odroid ttySAC2 odroid login: Password:
> Login incorrect odroid login: odroid Password: Welcome to
> Ubuntu 16.04.2 LTS (GNU/Linux 4.9.27-35 armv7l) *
> Documentation: https://help.ubuntu.com * Management:
> https://landscape.canonical.com * Support:
> https://ubuntu.com/advantage 131 packages can be updated. 1
> update is a security update. The programs included with the
> Ubuntu system are free software; the exact distribution terms
> for each program are described in the individual files in
> /usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO
> WARRANTY, to the extent permitted by applicable law.
> odroid@odroid:~$ blkid /dev/mmcblk1p1: SEC_TYPE="msdos"
> LABEL="boot" UUID="52AA-6867" TYPE="vfat"
> PARTUUID="3cedfd53-01" /dev/mmcblk1p2: LABEL="rootfs"
> UUID="e139ce78-9841-40fe-8823-96a304a09859" TYPE="ext4"
> PARTUUID="3cedfd53-02" /dev/sda1: UUID="1E1E-EBA6"
TYPE="vfat"
> PARTUUID="3cedfd53-01" /dev/sda2: LABEL="_boot"
> UUID="9bef0c7b-ced7-453b-bb4f-5072d3810d44" TYPE="ext4"
> PARTUUID="3cedfd53-02" /dev/sda3:
> UUID="8753dccc-b774-4213-82fc-6941ced77673" TYPE="swap"
> PARTUUID="3cedfd53-03" /dev/sda4: LABEL="_root"
> UUID="11cf09b5-43b2-4588-969d-550b4e2af055" TYPE="ext4"
> PARTUUID="3cedfd53-04" odroid@odroid:~$
>
------------------------------------------------------------------------
> On 08/22/2017 03:18 PM, Dennis Gilmore wrote:
>
> El mar, 22-08-2017 a las 15:14 -0700, Stewart Samuels
> escribió:
>
> Hello Dennis, The parameter you provided me below was
> incorrect (spelling error). I used cpuidle.off
> <http://cpuidle.off>=1 and the system now boot much
> further, but eventually goes into a:
>
> dracut-initqueue[493]: Warning: dracut-initqueue
> timeout - starting timeout scripts
>
> loop and never completes the boot process. Any other
> suggestions? See the output from the serial port that
> follows:
>
------------------------------------------------------------------------
>
> sorry for the typo I meant cpuidle.off
> <http://cpuidle.off>=1 can you confirm that the uuid of
> the root filesystem is still
> 11cf09b5-43b2-4588-969d-550b4e2af055 and has not ben
> changed? Dennis
>
>
>
> --
> Sent from my Android device with K-9 Mail. Please excuse my brevity.
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
8:18 p.m.
Dennis,
How do I rebuild the initrd? I can do this on my raspberryPI 2 running
Fedora 26 if I know the procedure to do it?
In the mean time, I will try to do the modprobe. Would I do this within
the dracut shell when the system aborts?
Stewart
On 08/22/2017 04:24 PM, dennis(a)ausil.us wrote:
It does not look like the USB controllers module is present, I have
run fedora from a micro SD card in my tests. You could try "modprobe
usb-storage" and try get the USB modules loaded. From another arm
system you should be able to rebuild the initrd with all the USB
modules if needed.
Dennis
Dennis
On 22 August 2017 6:17:13 pm GMT-05:00, Stewart Samuels
<searider74(a)gmail.com> wrote:
Here is the output from cat /proc/modules:
-----------------------------------------------------------------
dracut:/#
dracut:/# cat /proc/modules
hid_logitech_hidpp 24576 0 - Live 0xbf461000
xhci_plat_hcd 16384 0 - Live 0xbf44f000
dwc3 110592 0 - Live 0xbf407000
ulpi 16384 1 dwc3, Live 0xbf3f7000
udc_core 49152 1 dwc3, Live 0xbf3db000
phy_generic 16384 0 - Live 0xbf3c3000
hid_logitech_dj 20480 0 - Live 0xbf3a5000
clk_s2mps11 16384 1 - Live 0xbf39d000
s2mps11 49152 14 - Live 0xbf38d000
rtc_s5m 20480 0 - Live 0xbf383000
dwc3_exynos 16384 0 - Live 0xbf373000
phy_exynos_mipi_video 16384 0 - Live 0xbf36b000
phy_exynos_dp_video 16384 0 - Live 0xbf363000
pl330 28672 0 - Live 0xbf33f000
clk_exynos_audss 16384 0 - Live 0xbf301000
pwm_samsung 16384 0 - Live 0xbf24f000
i2c_exynos5 16384 0 - Live 0xbf247000
i2c_s3c2410 20480 0 - Live 0xbf23d000
dw_mmc_exynos 16384 0 - Live 0xbf235000
dw_mmc_pltfm 16384 1 dw_mmc_exynos, Live 0xbf1ff000
exynosdrm 167936 1 - Live 0xbf1c9000
dw_mmc 36864 2 dw_mmc_exynos,dw_mmc_pltfm, Live 0xbf1ba000
analogix_dp 32768 1 exynosdrm, Live 0xbf1ad000
mmc_core 135168 2 dw_mmc_exynos,dw_mmc, Live 0xbf17f000
ohci_exynos 16384 0 - Live 0xbf176000
phy_exynos_usb2 20480 2 - Live 0xbf16c000
drm_kms_helper 143360 2 exynosdrm,analogix_dp, Live 0xbf13a000
phy_exynos5_usbdrd 16384 4 - Live 0xbf132000
syscopyarea 16384 1 drm_kms_helper, Live 0xbf12b000
sysfillrect 16384 1 drm_kms_helper, Live 0xbf124000
sysimgblt 16384 1 drm_kms_helper, Live 0xbf11d000
ehci_exynos 16384 0 - Live 0xbf114000
fb_sys_fops 16384 1 drm_kms_helper, Live 0xbf10d000
drm 327680 4 exynosdrm,analogix_dp,drm_kms_helper, Live 0xbf0a2000
rtc_s3c 20480 0 - Live 0xbf098000
s5p_sss 16384 0 - Live 0xbf08f000
sunrpc 323584 1 - Live 0xbf022000
scsi_transport_iscsi 86016 1 - Live 0xbf000000
dracut:/#
-----------------------------------------------------------------
On 08/22/2017 04:06 PM, dennis(a)ausil.us wrote:
> What is the output of "cat /proc/partitions" next step would be
> making sure the right modules for the block storage are loaded.
>
> Dennis
>
> On 22 August 2017 6:03:52 pm GMT-05:00, Stewart Samuels
> <searider74(a)gmail.com> wrote:
>
> Dennis,
>
> I let the system try to boot and gave it more time with the dracut
> messages. It dumps me into the dracut login via emergency mode looking
> for the root partition it seems. It cannot find the system drive via
> the UUID that I showed in my last email is the UUID for the root
> partition. See the output on my serial console now. What do you suggest?
>
> Stewart
>
> ------------------------------------------------------------------------
>
> .
> .
> .
>
> [ 221.513878] dracut-initqueue[484]: Warning: dracut-initqueue timeout
> - starting timeout scripts
> [ 222.098261] dracut-initqueue[484]: Warning: dracut-initqueue timeout
> - starting timeout scripts
> [ 222.681174] dracut-initqueue[484]: Warning: dracut-initqueue timeout
> - starting timeout scripts
> [ 222.683247] dracut-initqueue[484]: Warning: Could not boot.
> [ 224.157646] dracut-initqueue[484]: Warning:
> /dev/disk/by-uuid/11cf09b5-43b2-4588-969d-550b4e2af055 does not exist
> Starting Setup Virtual Console...
> [ OK 224.359135] audit: type=1130 audit(1498600128.720:15): pid=1
> uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit'
> m] Started Setup Virtual Console[ 224.384023] audit: type=1131
> audit(1498600128.720:16): pid=1 uid=0 auid=4294967295 ses=429496'
> .
> Starting Dracut Emergency Shell...
> [ 224.501053] audit: type=1131 audit(1498600128.862:17): pid=1 uid=0
> auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymo'
> Warning: /dev/disk/by-uuid/11cf09b5-43b2-4588-969d-550b4e2af055 does not
> exist
>
> Generating "/run/initramfs/rdsosreport.txt"
>
>
> Entering emergency mode. Exit the shell to continue.
> Type "journalctl" to view system logs.
> You might want to save "/run/initramfs/rdsosreport.txt" to a USB
stick
> or /boot
> after mounting them and attach it to a bug report.
>
>
> dracut:/#
>
>
>
> ------------------------------------------------------------------------
>
>
> On 08/22/2017 03:46 PM, Stewart Samuels wrote:
>
> Dennis, I have confirmed the UUID is still
> 11cf09b5-43b2-4588-969d-550b4e2af05. See output from my
> Ubuntu login that follows. Our root partition here shows
> up as /dev/sda4. Stewart
> ------------------------------------------------------------------------
> Ubuntu 16.04.2 LTS odroid ttySAC2 odroid login: Password:
> Login incorrect odroid login: odroid Password: Welcome to
> Ubuntu 16.04.2 LTS (GNU/Linux 4.9.27-35 armv7l) *
> Documentation: https://help.ubuntu.com * Management:
> https://landscape.canonical.com * Support:
> https://ubuntu.com/advantage 131 packages can be updated.
> 1 update is a security update. The programs included with
> the Ubuntu system are free software; the exact
> distribution terms for each program are described in the
> individual files in /usr/share/doc/*/copyright. Ubuntu
> comes with ABSOLUTELY NO WARRANTY, to the extent
> permitted by applicable law. odroid@odroid:~$ blkid
> /dev/mmcblk1p1: SEC_TYPE="msdos" LABEL="boot"
> UUID="52AA-6867" TYPE="vfat"
PARTUUID="3cedfd53-01"
> /dev/mmcblk1p2: LABEL="rootfs"
> UUID="e139ce78-9841-40fe-8823-96a304a09859"
TYPE="ext4"
> PARTUUID="3cedfd53-02" /dev/sda1: UUID="1E1E-EBA6"
> TYPE="vfat" PARTUUID="3cedfd53-01" /dev/sda2:
> LABEL="_boot"
UUID="9bef0c7b-ced7-453b-bb4f-5072d3810d44"
> TYPE="ext4" PARTUUID="3cedfd53-02" /dev/sda3:
> UUID="8753dccc-b774-4213-82fc-6941ced77673"
TYPE="swap"
> PARTUUID="3cedfd53-03" /dev/sda4: LABEL="_root"
> UUID="11cf09b5-43b2-4588-969d-550b4e2af055"
TYPE="ext4"
> PARTUUID="3cedfd53-04" odroid@odroid:~$
> ------------------------------------------------------------------------
> On 08/22/2017 03:18 PM, Dennis Gilmore wrote:
>
> El mar, 22-08-2017 a las 15:14 -0700, Stewart Samuels
> escribió:
>
> Hello Dennis, The parameter you provided me below
> was incorrect (spelling error). I used
> cpuidle.off <http://cpuidle.off>=1 and the system
> now boot much further, but eventually goes into a:
>
> dracut-initqueue[493]: Warning:
> dracut-initqueue timeout - starting timeout
> scripts
>
> loop and never completes the boot process. Any
> other suggestions? See the output from the serial
> port that follows:
>
------------------------------------------------------------------------
>
> sorry for the typo I meant cpuidle.off
> <http://cpuidle.off>=1 can you confirm that the uuid
> of the root filesystem is still
> 11cf09b5-43b2-4588-969d-550b4e2af055 and has not ben
> changed? Dennis
>
>
>
> --
> Sent from my Android device with K-9 Mail. Please excuse my brevity.
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
9:20 a.m.
El mar, 22-08-2017 a las 18:18 -0700, Stewart Samuels escribió:
Dennis,
How do I rebuild the initrd? I can do this on my raspberryPI 2
running Fedora 26 if I know the procedure to do it?
you would have to use an arm
device mount the filesystems, bind mount
in /dev /proc /sys chroot in, install dracut-config-generic and run
dracut to regenerate it looking at the man page or help to get the
options to install any missing modules
In the mean time, I will try to do the modprobe. Would I do this
within the dracut shell when the system aborts?
yes you would do it in the dracut
shell
I setup a new SD card installing the released server image, and after
appending cpuidle.off=1 it booted fine
U-Boot 2017.05 (Jun 24 2017 - 16:40:39 +0000) for ODROID-XU3
CPU: Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type: xu4
DRAM: 2 GiB
MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
mmc_init: -5, time 3
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
523 bytes read in 20 ms (25.4 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command: autoboot
Ignoring malformed menu command: hidden
Ignoring unknown command: totaltimeout
Fedora-Server-armhfp-26-1.5 Boot Options.
1: Fedora-Server-armhfp-26-1.5 (4.11.8-300.fc26.armv7hl)
Enter choice: 1: Fedora-Server-armhfp-26-1.5 (4.11.8-
300.fc26.armv7hl)
Retrieving file: /initramfs-4.11.8-300.fc26.armv7hl.img
55990814 bytes read in 4195 ms (12.7 MiB/s)
Retrieving file: /vmlinuz-4.11.8-300.fc26.armv7hl
6267616 bytes read in 493 ms (12.1 MiB/s)
append: ro root=UUID=7b8bbc09-f016-489a-8288-fac9c8de58d0 cpuidle.off=1
Retrieving file: /dtb-4.11.8-300.fc26.armv7hl/exynos5422-odroidxu4.dtb
54941 bytes read in 83 ms (645.5 KiB/s)
Kernel image @ 0x42000000 [ 0x000000 - 0x5fa2e0 ]
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Ramdisk to 4ca9a000, end 4ffffa1e ... OK
Loading Device Tree to 4ca89000, end 4ca9969c ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x100
[ 0.000000] Linux version 4.11.8-300.fc26.armv7hl (mockbuild@buildvm
-armv7-13.arm.fedoraproject.org) (gcc version 7.1.1 20170622 (Red Hat
7.1.1-3) (GCC) ) #1 SMP Thu Jun 29 21:24:11 UTC 2017
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created DMA memory pool at 0xbe200000,
size 8 MiB
[ 0.000000] OF: reserved mem: initialized node region_mfc_right,
compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0xbbe00000,
size 36 MiB
[ 0.000000] OF: reserved mem: initialized node region_mfc_left,
compatible id shared-dma-pool
[ 0.000000] cma: Reserved 64 MiB at 0xb7c00000
[ 0.000000] Samsung CPU ID: 0xe5422001
[ 0.000000] Running under secure firmware.
[ 0.000000] percpu: Embedded 15 pages/cpu @eede0000 s31628 r8192
d21620 u61440
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping
on. Total pages: 505664
[ 0.000000] Kernel command line: ro root=UUID=7b8bbc09-f016-489a-
8288-fac9c8de58d0 cpuidle.off=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Memory: 1874804K/2029568K available (7440K kernel code,
1301K rwdata, 3528K rodata, 2048K init, 518K bss, 89228K reserved,
65536K cma-reserved, 1177600K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0a4408c (8433 kB)
[ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB)
[ 0.000000] .data : 0xc1000000 - 0xc1145584 (1302 kB)
[ 0.000000] .bss : 0xc1145584 - 0xc11c7160 ( 519 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32,
nr_cpu_ids=8
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] GIC physical location is 0x10481000
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps
every 89478484971ns
[ 0.007594] Console: colour dummy device 80x30
[ 0.008714] console [tty0] enabled
[ 0.008775] Calibrating delay loop (skipped), value calculated using
timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.008837] pid_max: default: 32768 minimum: 301
[ 0.009328] Security Framework initialized
[ 0.009365] Yama: becoming mindful.
[ 0.009411] SELinux: Initializing.
[ 0.009828] Mount-cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.009867] Mountpoint-cache hash table entries: 2048 (order: 1,
8192 bytes)
[ 0.011168] CPU: Testing write buffer coherency: ok
[ 0.011243] ftrace: allocating 31692 entries in 62 pages
[ 0.090880] CPU0: update cpu_capacity 448
[ 0.090930] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.091693] Setting up static identity map for 0x40300000 -
0x40300098
[ 0.092453] ARM CCI driver probed
[ 0.092685] Exynos MCPM support installed
[ 0.101290] EFI services will not be available.
[ 0.102011] smp: Bringing up secondary CPUs ...
[ 0.103107] CPU1: update cpu_capacity 448
[ 0.103115] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.104260] CPU2: update cpu_capacity 448
[ 0.104269] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.105407] CPU3: update cpu_capacity 448
[ 0.105415] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[ 0.106579] CPU4: update cpu_capacity 1535
[ 0.106588] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.107844] CPU5: update cpu_capacity 1535
[ 0.107852] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.109002] CPU6: update cpu_capacity 1535
[ 0.109010] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.110165] CPU7: update cpu_capacity 1535
[ 0.110173] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.110312] smp: Brought up 1 node, 8 CPUs
[ 0.110620] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[ 0.110649] CPU: WARNING: CPU(s) started in wrong/inconsistent modes
(primary CPU mode 0x1a)
[ 0.110687] CPU: This may indicate a broken bootloader or firmware.
[ 0.113441] devtmpfs: initialized
[ 0.136821] VFP support v0.3: implementor 41 architecture 2 part 30
variant 7 rev 3
[ 0.137415] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.137479] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.141949] pinctrl core: initialized pinctrl subsystem
[ 0.145547] NET: Registered protocol family 16
[ 0.147955] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.153971] No ATAGs?
[ 0.154337] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
watchpoint registers.
[ 0.154405] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.156236] Serial: AMBA PL011 UART driver
[ 0.169418] random: fast init done
[ 0.192895] EXYNOS5420 PMU initialized
[ 0.235545] vgaarb: loaded
[ 0.236599] SCSI subsystem initialized
[ 0.237323] usbcore: registered new interface driver usbfs
[ 0.237443] usbcore: registered new interface driver hub
[ 0.237650] usbcore: registered new device driver usb
[ 0.240275] NetLabel: Initializing
[ 0.240311] NetLabel: domain hash size = 128
[ 0.240335] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.240480] NetLabel: unlabeled traffic allowed by default
[ 0.241029] clocksource: Switched to clocksource mct-frc
[ 0.343777] VFS: Disk quotas dquot_6.6.0
[ 0.343936] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.362615] NET: Registered protocol family 2
[ 0.363955] TCP established hash table entries: 8192 (order: 3,
32768 bytes)
[ 0.364148] TCP bind hash table entries: 8192 (order: 4, 65536
bytes)
[ 0.364352] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.364622] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.364695] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.365342] NET: Registered protocol family 1
[ 0.366270] Unpacking initramfs...
[ 5.774142] Freeing initrd memory: 54680K
[ 5.844438] audit: initializing netlink subsys (disabled)
[ 5.844710] audit: type=2000 audit(5.788:1): state=initialized
audit_enabled=0 res=1
[ 5.845180] Initialise system trusted keyrings
[ 5.845422] workingset: timestamp_bits=14 max_order=19
bucket_order=5
[ 5.853389] zbud: loaded
[ 6.147911] NET: Registered protocol family 38
[ 6.147946] Key type asymmetric registered
[ 6.147969] Asymmetric key parser 'x509' registered
[ 6.148128] bounce: pool size: 64 pages
[ 6.148227] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 250)
[ 6.148463] io scheduler noop registered
[ 6.148487] io scheduler deadline registered
[ 6.148887] io scheduler cfq registered (default)
[ 6.148912] io scheduler mq-deadline registered
[ 6.149588] atomic64_test: passed
[ 6.175064] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 6.188016] Serial: AMBA driver
[ 6.188372] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58,
base_baud = 0) is a S3C6400/10
[ 6.188891] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59,
base_baud = 0) is a S3C6400/10
[ 6.189448] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60,
base_baud = 0) is a S3C6400/10
[ 6.942616] console [ttySAC2] enabled
[ 6.946790] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61,
base_baud = 0) is a S3C6400/10
[ 6.957384] msm_serial: driver initialized
[ 6.960394] STMicroelectronics ASC driver initialized
[ 6.969469] libphy: Fixed MDIO Bus: probed
[ 6.972858] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 6.978682] ehci-pci: EHCI PCI platform driver
[ 6.983130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.989234] ohci-pci: OHCI PCI platform driver
[ 6.993694] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.000334] usbcore: registered new interface driver usbserial
[ 7.005830] usbcore: registered new interface driver
usbserial_generic
[ 7.012320] usbserial: USB Serial support registered for generic
[ 7.018520] mousedev: PS/2 mouse device common for all mice
[ 7.031679] device-mapper: uevent: version 1.0.3
[ 7.035540] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
initialised: dm-devel(a)redhat.com
[ 7.044048] failed to register cpuidle driver
[ 7.048629] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.053967] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.059215] usbcore: registered new interface driver usbhid
[ 7.064502] usbhid: USB HID core driver
[ 7.071239] drop_monitor: Initializing network drop monitor service
[ 7.076334] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.081532] Initializing XFRM netlink socket
[ 7.086536] NET: Registered protocol family 10
[ 7.107078] Segment Routing with IPv6
[ 7.109372] mip6: Mobile IPv6
[ 7.112255] NET: Registered protocol family 17
[ 7.117361] ThumbEE CPU extension supported.
[ 7.120924] Registering SWP/SWPB emulation handler
[ 7.125690] big.LITTLE switcher initializing
[ 7.129931] CPU0 paired with CPU7
[ 7.133221] CPU1 paired with CPU6
[ 7.136511] CPU2 paired with CPU5
[ 7.139803] CPU3 paired with CPU4
[ 7.143100] GIC ID for CPU 0 cluster 1 is 4
[ 7.147259] GIC ID for CPU 1 cluster 1 is 5
[ 7.151418] GIC ID for CPU 2 cluster 1 is 6
[ 7.155577] GIC ID for CPU 3 cluster 1 is 7
[ 7.159736] GIC ID for CPU 0 cluster 0 is 0
[ 7.165557] IRQ54 no longer affine to CPU4
[ 7.169793] GIC ID for CPU 1 cluster 0 is 1
[ 7.177984] IRQ55 no longer affine to CPU5
[ 7.179350] GIC ID for CPU 2 cluster 0 is 2
[ 7.187498] IRQ56 no longer affine to CPU6
[ 7.191353] GIC ID for CPU 3 cluster 0 is 3
[ 7.199338] IRQ57 no longer affine to CPU7
[ 7.203698] big.LITTLE switcher initialized
[ 7.211711] registered taskstats version 1
[ 7.214667] Loading compiled-in X.509 certificates
[ 7.235598] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-
generic,sha256))
[ 7.250626] Loaded X.509 cert 'Fedora kernel signing key:
03162a918d07b67ba6af65b45b2ec58dafb524d8'
[ 7.258448] zswap: loaded using pool lzo/zbud
[ 7.279761] Key type big_key registered
[ 7.299023] Key type encrypted registered
[ 7.336596] hctosys: unable to open rtc device (rtc0)
[ 7.340260] sr_init: No PMIC hook to init smartreflex
[ 7.346139] sr_init: platform driver register failed for SR
[ 7.352906] samsung-uart 12c20000.serial: DMA request failed, DMA
will not be used
[ 7.364349] Freeing unused kernel memory: 2048K
[ 7.367723] rodata_test: test data was not read only
[ 7.411636] systemd[1]: System time before build time, advancing
clock.
[ 7.440586] systemd[1]: systemd 233 running in system mode. (+PAM
+AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN
default-hierarchy=hybrid)
[ 7.460108] systemd[1]: Detected architecture arm.
[ 7.464112] systemd[1]: Running in initial RAM disk.
Welcome to Fedora 26 (Server Edition) dracut-044-183.fc26 (Initramfs)!
[ 7.480205] systemd[1]: No hostname configured.
[ 7.483370] systemd[1]: Set hostname to <localhost>.
[ 7.488405] systemd[1]: Initializing machine ID from random
generator.
[ 7.940300] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 7.952524] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 7.964658] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 7.976229] systemd[1]: Reached target Timers.
[ OK ] Reached target Timers.
[ OK ] Listening on Journal Socket.
[ OK ] Reached target Swap.
[ OK ] Created slice System Slice.
[ OK ] Reached target Slices.
Starting Apply Kernel Variables...
Starting Setup Virtual Console...
[ OK ] Listening on Journal Socket (/dev/log).
Starting dracut cmdline hook...
[ OK ] Reached target Local File Systems.
Starting Create list of required st…ce nodes for the current
kernel...
Starting Journal Service...
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Setup Virtual Console.
[ OK ] Started Create list of required sta…vice nodes for the current
kernel.
[ 8.143378] audit: type=1130 audit(1498599911.731:2): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
Starting Create Static Device Nodes in /dev...
[ 8.188096] random: crng init done
[ OK ] Started Create Static Device Nodes in /dev.
[ 8.209520] audit: type=1130 audit(1498599911.797:3): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-
setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=? terminal=? res=success'
[ OK ] Started Journal Service.
[ 8.236759] audit: type=1130 audit(1498599911.824:4): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ OK ] Started dracut cmdline hook.
[ 9.263372] audit: type=1130 audit(1498599912.851:5): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
Starting Open-iSCSI...
Starting dracut pre-udev hook...
[ 9.321629] Loading iSCSI transport class v2.0-870.
[ OK ] Started Open-iSCSI.
[ 9.334509] audit: type=1130 audit(1498599912.922:6): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=iscsid
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 9.504725] RPC: Registered named UNIX socket transport module.
[ 9.509259] RPC: Registered udp transport module.
[ 9.513922] RPC: Registered tcp transport module.
[ 9.518600] RPC: Registered tcp NFSv4.1 backchannel transport
module.
[ 9.597623] dracut-pre-udev[344]: rpcbind:
/run/rpcbind/rpcbind.lock: No such file or directory
[ 9.902683] dracut-pre-udev[344]: rpc.idmapd: conf_reinit: open
("(null)", O_RDONLY) failed
[ 9.915135] dracut-pre-udev[344]: rpc.idmapd: conf_reinit: open
("(null)", O_RDONLY) failed
[ OK ] Started dracut pre-udev hook.
[ 10.099347] audit: type=1130 audit(1498599913.687:7): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
[ 10.160215] audit: type=1130 audit(1498599913.746:8): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
Starting dracut pre-trigger hook...
[ OK ] Started dracut pre-trigger hook.
[ 10.848421] audit: type=1130 audit(1498599914.436:9): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
Starting udev Coldplug all Devices...
Mounting Configuration File System...
[ OK ] Mounted Configuration File System.
[ OK ] Started udev Coldplug all Devices.
[ 11.461548] audit: type=1130 audit(1498599915.049:10): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-
trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=?
terminal=? res=success'
Starting dracut initqueue hook...
Starting Show Plymouth Boot Screen...
[ 11.693795] ehci-exynos: EHCI EXYNOS driver
[ OK ] Started Show Plymouth Bo[ 11.730091] audit: type=1130
audit(1498599915.314:11): pid=1 uid=0 auid=4294967295 ses=4294967295
subj=kernel msg='unit=plymouth-start comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
ot Screen.
[ OK ] Reached target Paths.
[ OK ] Reached target Encryp[ 11.755855] s5p-secss 10830000.sss:
s5p-sss driver registered
ted Volumes.
[ OK ] Reached target System Initialization.
[ OK ] Listening on Open-iSCSI iscsiuio Socket.
[ OK ] Reached target Sockets.
[ OK ] Started Forward Password Requests to Plymouth Directory Watch.
[ OK ] Reached target Basic System.
[ 11.834124] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply
vbus not found, using dummy regulator
[ 11.843580] ohci-exynos: OHCI EXYNOS driver
[ 11.848496] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply
vbus-boost not found, using dummy regulator
[ 11.868075] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd':
-517
[ 11.892071] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus
not found, using dummy regulator
[ 11.901041] s3c-i2c 12c80000.i2c: slave address 0x00
[ 11.902711] Synopsys Designware Multimedia Card Interface Driver
[ 11.905866] exynos-ehci 12110000.usb: EHCI Host Controller
[ 11.906355] exynos-ehci 12110000.usb: new USB bus registered,
assigned bus number 1
[ 11.923818] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
[ 11.934889] exynos-ehci 12110000.usb: irq 71, io mem 0x12110000
[ 11.935074] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
[ 11.936565] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply
vbus not found, using dummy regulator
[ 11.936671] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply
vbus-boost not found, using dummy regulator
[ 11.940105] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.978733] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[ 11.980290] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 11.980308] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.980384] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
[ 11.994247] exynos-rot 11c00000.rotator: The exynos rotator is
probed successfully
[ 11.996843] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 11.997154] dwmmc_exynos 12220000.mmc: Using internal DMA
controller.
[ 11.997171] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 11.997264] dwmmc_exynos 12220000.mmc: DW MMC controller at irq
74,64 bit host data width,64 deep fifo
[ 11.998889] exynos-drm-gsc 13e00000.video-scaler: failed to get
system register.
[ 11.999388] exynos-drm-gsc 13e00000.video-scaler: drm gsc registered
successfully.
[ 12.000830] exynos-drm-gsc 13e10000.video-scaler: failed to get
system register.
[ 12.001352] exynos-drm-gsc 13e10000.video-scaler: drm gsc registered
successfully.
[ 12.002677] exynos-drm-ipp exynos-drm-ipp: drm ipp registered
successfully.
[ 12.076945] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[ 12.083387] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 12.090537] usb usb1: Product: EHCI Host Controller
[ 12.095375] usb usb1: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
ehci_hcd
[ 12.102213] usb usb1: SerialNumber: 12110000.usb
[ 12.110520] hub 1-0:1.0: USB hub found
[ 12.112952] hub 1-0:1.0: 3 ports detected
[ 12.123321] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd':
-517
[ 12.129684] exynos-ohci 12120000.usb: USB Host Controller
[ 12.132875] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-
241330
[ 12.132886] dma-pl330 121a0000.pdma: DBUFF-32x4bytes
Num_Chans-8 Num_Peri-32 Num_Events-32
[ 12.148863] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-
241330
[ 12.148874] dma-pl330 121b0000.pdma: DBUFF-32x4bytes
Num_Chans-8 Num_Peri-32 Num_Events-32
[ 12.154459] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-
241330
[ 12.154469] dma-pl330 10800000.mdma: DBUFF-64x8bytes
Num_Chans-8 Num_Peri-1 Num_Events-32
[ 12.179312] exynos-ohci 12120000.usb: new USB bus registered,
assigned bus number 2
[ 12.186717] exynos-ohci 12120000.usb: irq 71, io mem 0x12120000
[ 12.249412] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001
[ 12.254855] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 12.262054] usb usb2: Product: USB Host Controller
[ 12.266772] usb usb2: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
ohci_hcd
[ 12.273610] usb usb2: SerialNumber: 12120000.usb
[ 12.281041] hub 2-0:1.0: USB hub found
[ 12.283459] hub 2-0:1.0: 3 ports detected
[ 12.293622] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.299310] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 12.305554] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.310956] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
[ 12.322534] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 12.328291] alloc_contig_range: [b7c47, b7c48) PFNs busy
[ 12.336196] dwmmc_exynos 12220000.mmc: Using internal DMA
controller.
[ 12.341258] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 12.346678] dwmmc_exynos 12220000.mmc: DW MMC controller at irq
74,64 bit host data width,64 deep fifo
[ 12.359839] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd':
-517
[ 12.414731] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.420618] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 12.426708] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.432156] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
[ 12.445423] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 12.448628] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[ 12.457174] dwmmc_exynos 12220000.mmc: Using internal DMA
controller.
[ 12.463229] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 12.465078] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[ 12.472535] vdd_ldo15: Bringing 3300000uV into 3100000-3100000uV
[ 12.480560] dwmmc_exynos 12220000.mmc: DW MMC controller at irq
74,64 bit host data width,64 deep fifo
[ 12.487626] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[ 12.517641] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req
400000Hz, actual 396825HZ div = 63)
[ 12.537145] dwmmc_exynos 12220000.mmc: 1 slots initialized
[ 12.543144] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[ 12.547485] s3c-rtc 101e0000.rtc: warning: invalid RTC value so
initializing it
[ 12.554827] rtc rtc1: invalid alarm value: 1900-1-2 0:0:0
[ 12.559264] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as
rtc0
[ 12.569209] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1
[ 12.577672] exynos-tmu 10060000.tmu: More trip points than supported
by this TMU.
[ 12.583801] exynos-tmu 10060000.tmu: 2 trip points should be
configured in polling mode.
[ 12.598403] OF: graph: no port node found in /soc/hdmi@14530000
[ 12.606934] [drm] Exynos DRM: using 14450000.mixer device for DMA
mapping operations
[ 12.613816] exynos-drm exynos-drm: bound 14450000.mixer (ops
mixer_component_ops [exynosdrm])
[ 12.622627] exynos-drm exynos-drm: bound 14530000.hdmi (ops
hdmi_component_ops [exynosdrm])
[ 12.630693] exynos-drm exynos-drm: bound exynos-drm-vidi (ops
vidi_component_ops [exynosdrm])
[ 12.638669] [drm] Supports vblank timestamp caching Rev 2
(21.10.2013).
[ 12.645218] [drm] No driver support for vblank timestamp query.
[ 12.651361] [drm] Initialized exynos 1.0.0 20110530 for exynos-drm
on minor 0
[ 12.670171] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req
50000000Hz, actual 50000000HZ div = 0)
[ 12.678644] mmc0: new high speed SDHC card at address 59b4
[ 12.684385] usb_phy_generic usb_phy_generic.0.auto:
usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[ 12.684895] usb_phy_generic usb_phy_generic.2.auto:
usb_phy_generic.2.auto supply vcc not found, using dummy regulator
[ 12.685494] usb_phy_generic usb_phy_generic.3.auto:
usb_phy_generic.3.auto supply vcc not found, using dummy regulator
[ 12.711086] mmcblk0: mmc0:59b4 00000 7.37 GiB
[ 12.720799] usb_phy_generic usb_phy_generic.1.auto:
usb_phy_generic.1.auto supply vcc not found, using dummy regulator
[ 12.734693] mmcblk0: p1 p2 p3 p4
[ 12.735582] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.735813] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 12.735832] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.735877] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
[ 12.767464] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.773470] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 12.779402] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.784782] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
[ 12.791900] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 12.792355] xhci-hcd xhci-hcd.4.auto: new USB bus registered,
assigned bus number 3
[ 12.793106] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220f04c hci
version 0x100 quirks 0x02010010
[ 12.793209] xhci-hcd xhci-hcd.4.auto: irq 135, io mem 0x12000000
[ 12.793548] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0002
[ 12.793558] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 12.793566] usb usb3: Product: xHCI Host Controller
[ 12.793573] usb usb3: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 12.793580] usb usb3: SerialNumber: xhci-hcd.4.auto
[ 12.794679] hub 3-0:1.0: USB hub found
[ 12.794751] hub 3-0:1.0: 1 port detected
[ 12.795499] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 12.795868] xhci-hcd xhci-hcd.4.auto: new USB bus registered,
assigned bus number 4
[ 12.796112] usb usb4: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 12.796354] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0003
[ 12.796364] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 12.796372] usb usb4: Product: xHCI Host Controller
[ 12.796379] usb usb4: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 12.796386] usb usb4: SerialNumber: xhci-hcd.4.auto
[ 12.797484] hub 4-0:1.0: USB hub found
[ 12.797553] hub 4-0:1.0: 1 port detected
[ 12.798344] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 12.798712] xhci-hcd xhci-hcd.5.auto: new USB bus registered,
assigned bus number 5
[ 12.799384] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220f04c hci
version 0x100 quirks 0x02010010
[ 12.799468] xhci-hcd xhci-hcd.5.auto: irq 136, io mem 0x12400000
[ 12.799801] usb usb5: New USB device found, idVendor=1d6b,
idProduct=0002
[ 12.799812] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 12.799820] usb usb5: Product: xHCI Host Controller
[ 12.799827] usb usb5: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 12.799834] usb usb5: SerialNumber: xhci-hcd.5.auto
[ 12.801066] hub 5-0:1.0: USB hub found
[ 12.801139] hub 5-0:1.0: 1 port detected
[ 12.801633] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 12.801950] xhci-hcd xhci-hcd.5.auto: new USB bus registered,
assigned bus number 6
[ 12.802159] usb usb6: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 12.802399] usb usb6: New USB device found, idVendor=1d6b,
idProduct=0003
[ 12.802410] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 12.802417] usb usb6: Product: xHCI Host Controller
[ 12.802425] usb usb6: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 12.802432] usb usb6: SerialNumber: xhci-hcd.5.auto
[ 12.803399] hub 6-0:1.0: USB hub found
[ 12.803466] hub 6-0:1.0: 1 port detected
[ OK ] Found de[ 13.046711] dwmmc_exynos 12200000.mmc: IDMAC
supports 32-bit address mode.
[ 13.053682] alloc_contig_range: [b7c49, b7c4a) PFNs busy
[ 13.058976] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 13.065226] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 13.070664] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
vice /dev/disk/by-uuid/7b8bbc09-f016-489a-8288-fac9c8de58d0.
[ OK ] Reached target Initrd Root Device.
[ OK 13.110810] audit: type=1130 audit(1498599916.698:12): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-
initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=? terminal=? res=success'
0m] Started dracut initqueue hook.
Starting dracut pre-mount hook...
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
[ OK 13.260087] audit: type=1130 audit(1498599916.847:13): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-
mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
0m] Started dracut pre-mount hook.
Starting File System Check on /dev/…c09-f016-489a-8288-
fac9c8de58d0...
[ OK 13.415704] audit: type=1130 audit(1498599917.003:14): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-
fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=? terminal=? res=success'
0m] Started File System Check on /dev/d…bbc09-f016-489a-8288-
fac9c8de58d0.
Mounting /sysroot...
[ 13.676603] SGI XFS with ACLs, security attributes, no debug enabled
[ 13.698391] XFS (mmcblk0p4): Mounting V5 Filesystem
[ 14.326779] XFS (mmcblk0p4): Ending clean mount
[ OK ] Mounted /sysroot.
[ OK ] Reached target Initrd Root File System.
Starting Reload Configuration from the Real Root...
[ OK 15.154176] audit: type=1130 audit(1498599918.742:15): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-
parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=? terminal=? res=success'
[ 15.173881] audit: type=1131 audit(1498599918.742:16): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
0m] Started Reload Configuration from the Real Root.
[ OK ] Reached target Initrd File Systems.
[ OK ] Reached target Initrd Default Target.
Starting dracut pre-pivot and cleanup hook...
[ 15.279632] usb usb3-port1: connect-debounce failed
[ OK 15.899414] audit: type=1130 audit(1498599919.487:17): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-
pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 15.904966] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-
241330
[ 15.905074] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6
Num_Peri-16 Num_Events-6
[ 15.910090] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 15.918252] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 15.918272] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 15.918322] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
0m] Started dracut pre-pivot and cleanup hook.
Starting Cleaning Up and Shutting Down Daemons...
[ OK ] Stopped target Timers.
Starting Setup Virtual Console...
[ 16.011318] audit: type=1131 audit(1498599919.597:18): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
Starting Plymouth switch root service...
[ OK ] Stopped dracut pre-pivot and cleanup hoo[ 16.040472] audit:
type=1130 audit(1498599919.625:19): pid=1 uid=0 auid=4294967295
ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ 16.059276] audit: type=1131 audit(1498599919.625:20): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
k.
[ O[ 16.059898] audit: type=1130 audit(1498599919.647:21): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-
mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 16.059976] audit: type=1131 audit(1498599919.647:22): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
K ] Stopped target Initrd Default Target.
[ 16.125953] audit: type=1130 audit(1498599919.713:23): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 16.145251] audit: type=1131 audit(1498599919.714:24): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 16.165087] audit: type=1130 audit(1498599919.733:25): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-
trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=?
terminal=? res=success'
m OK ] Sto[ 16.165113] audit: type=1131 audit(1498599919.733:26):
pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel
msg='unit=systemd-udev-trigger comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
pped target Initrd Root Device.
[ OK ] Stopped target Basic System.
[ OK ] Stopped target Sockets.
[ OK ] Closed Open-iSCSI iscsiuio Socket.
[ OK ] Stopped target System Initialization.
[ OK ] Stopped Apply Kernel Variables.
[ OK ] Stopped target Swap.
[ OK ] Stopped target Slices.
[ OK ] Stopped dracut pre-mount hook.
[ OK ] Stopped target Encrypted Volumes.
[ OK ] Stopped target Remote File Systems.
[ OK ] Stopped target Remote File Systems (Pre).
[ OK ] Stopped dracut initqueue hook.
[ OK ] Stopped udev Coldplug all Devices.
[ OK ] Stopped dracut pre-trigger hook.
Stopping udev Kernel Device Manager...
Stopping Open-iSCSI...
[ OK ] Stopped target Local File Systems.
[ OK ] Stopped target Paths.
[ OK ] Stopped udev Kernel Device Manager.
[ OK ] Started Setup Virtual Console.
[ OK ] Started Plymouth switch root service.
[ OK ] Stopped Open-iSCSI.
[ OK ] Stopped dracut pre-udev hook.
[ OK ] Stopped dracut cmdline hook.
[ OK ] Stopped Create Static Device Nodes in /dev.
[ OK ] Stopped Create list of required sta…vice nodes for the current
kernel.
[ OK ] Closed udev Kernel Socket.
[ OK ] Closed udev Control Socket.
Starting Cleanup udevd DB...
[ OK ] Started Cleaning Up and Shutting Down Daemons.
[ OK ] Started Cleanup udevd DB.
[ OK ] Reached target Switch Root.
Starting Switch Root...
[ 16.477957] systemd-journald[222]: Received SIGTERM from PID 1
(systemd).
[ 16.886362] systemd: 17 output lines suppressed due to ratelimiting
[ 18.126756] SELinux: Class sctp_socket not defined in policy.
[ 18.131191] SELinux: Class icmp_socket not defined in policy.
[ 18.137005] SELinux: Class ax25_socket not defined in policy.
[ 18.142782] SELinux: Class ipx_socket not defined in policy.
[ 18.148500] SELinux: Class netrom_socket not defined in policy.
[ 18.154480] SELinux: Class atmpvc_socket not defined in policy.
[ 18.160459] SELinux: Class x25_socket not defined in policy.
[ 18.166177] SELinux: Class rose_socket not defined in policy.
[ 18.172008] SELinux: Class decnet_socket not defined in policy.
[ 18.177962] SELinux: Class atmsvc_socket not defined in policy.
[ 18.183941] SELinux: Class rds_socket not defined in policy.
[ 18.189660] SELinux: Class irda_socket not defined in policy.
[ 18.195467] SELinux: Class pppox_socket not defined in policy.
[ 18.201358] SELinux: Class llc_socket not defined in policy.
[ 18.207078] SELinux: Class can_socket not defined in policy.
[ 18.212797] SELinux: Class tipc_socket not defined in policy.
[ 18.218603] SELinux: Class bluetooth_socket not defined in policy.
[ 18.224842] SELinux: Class iucv_socket not defined in policy.
[ 18.230649] SELinux: Class rxrpc_socket not defined in policy.
[ 18.236540] SELinux: Class isdn_socket not defined in policy.
[ 18.242526] SELinux: Class phonet_socket not defined in policy.
[ 18.248325] SELinux: Class ieee802154_socket not defined in policy.
[ 18.254653] SELinux: Class caif_socket not defined in policy.
[ 18.260456] SELinux: Class alg_socket not defined in policy.
[ 18.266176] SELinux: Class nfc_socket not defined in policy.
[ 18.271895] SELinux: Class vsock_socket not defined in policy.
[ 18.277787] SELinux: Class kcm_socket not defined in policy.
[ 18.283506] SELinux: Class qipcrtr_socket not defined in policy.
[ 18.289573] SELinux: Class smc_socket not defined in policy.
[ 18.295292] SELinux: the above unknown classes and permissions will
be allowed
[ 18.419669] systemd[1]: Successfully loaded SELinux policy in
1.045771s.
[ 18.803799] systemd[1]: Relabelled /dev and /run in 240.195ms.
Welcome to Fedora 26 (Server Edition)!
[ OK ] Stopped Switch Root.
[ OK ] Stopped Journal Service.
Starting Journal Service...
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Listening on udev Control Socket.
[ OK ] Created slice system-sshd\x2dkeygen.slice.
[ OK ] Created slice system-getty.slice.
[ OK ] Stopped target Switch Root.
[ OK ] Stopped target Initrd File Systems.
[ OK ] Stopped target Initrd Root File System.
Starting Create list of required st…ce nodes for the current
kernel...
[ OK ] Created slice system-serial\x2dgetty.slice.
Mounting POSIX Message Queue File System...
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ OK ] Reached target rpc_pipefs.target.
Starting Setup Virtual Console...
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on LVM2 metadata daemon socket.
[ OK ] Listening on LVM2 poll daemon socket.
[ OK ] Listening on Process Core Dump Socket.
[ OK ] Reached target Paths.
[ OK ] Created slice User and Session Slice.
[ OK ] Reached target Slices.
[ OK ] Listening on udev Kernel Socket.
Starting Monitoring of LVM2 mirrors…ng dmeventd or progress
polling...
Starting Apply Kernel Variables...
[ OK ] Set up automount Arbitrary Executab…rmats File System
Automount Point.
Mounting Debug File System...
[ OK ] Stopped File System Check on Root Device.
Starting Remount Root and Kernel File Systems...
[ OK ] Mounted Debug File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Journal Service.
[ OK ] Started Create list of required sta…vice nodes for the current
kernel.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started LVM2 metadata daemon.
[ OK ] Started Remount Root and Kernel File Systems.
Starting udev Coldplug all Devices...
Starting Flush Journal to Persistent Storage...
Starting Create Static Device Nodes in /dev...
Starting Configure read-only root support...
[ 20.480348] systemd-journald[676]: Received request to flush runtime
journal from PID 1
[ 20.681784] systemd-journald[676]: File
/var/log/journal/97e60d4efcaf4302880532e97752f587/system.journal
corrupted or uncleanly shut down, renaming and replacing.
[ OK ] Started Setup Virtual Console.
[ OK 20.985859] kauditd_printk_skb: 40 callbacks suppressed
[ 20.990463] audit: type=1130 audit(1498599924.573:67): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=fedora-readonly comm="systemd"
exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
0m] Started Configure read-only root support.
Starting Load/Save Random Seed...
[ OK 21.024637] audit: type=1130 audit(1498599924.612:68): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=systemd-tmpfiles-setup-dev comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
m] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Started Load/Save Random Seed.
[ 21.074691] audit: type=1130 audit(1498599924.658:69): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=systemd-random-seed comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ OK 21.158352] audit: type=1130 audit(1498599924.746:70): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=systemd-journal-flush comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
0m] Started Flush Journal to Persistent Storage.
[ OK 21.486290] audit: type=1130 audit(1498599925.074:71): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=systemd-udev-trigger comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
0m] Started udev Coldplug all Devices.
Starting udev Wait for Complete Device Initialization...
[ OK 22.472347] audit: type=1130 audit(1498599926.060:72): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=systemd-udevd comm="systemd"
exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
0m] Started udev Kernel Device Manager.
[ 23.040068] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 23.045833] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 23.052090] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 23.059702] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
[ 23.070530] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
[ 23.090821] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req
400000Hz, actual 396825HZ div = 63)
[ 23.110215] dwmmc_exynos 12200000.mmc: 1 slots initialized
[ 23.285490] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset
disabled, irq disabled
[ 23.330471] exynos-nocp: new NoC Probe device registered:
10ca1000.nocp
[ 23.340685] media: Linux media interface: v0.10
[ 23.345210] exynos-nocp: new NoC Probe device registered:
10ca1400.nocp
[ 23.355296] exynos-nocp: new NoC Probe device registered:
10ca1800.nocp
[ 23.362860] exynos-nocp: new NoC Probe device registered:
10ca1c00.nocp
[ 23.457606] Linux video capture interface: v2.00
[ OK ] Found device /dev/ttySAC2.
[ 23.783328] platform 11000000.codec:left: assigned reserved memory
node region_mfc_left
[ OK ] Found device /dev/disk/by-uuid/444ba0f3-9123-4bf8-9786-
98906faf18f6.
Activating swap [ 23.816915] platform 11000000.codec:right:
assigned reserved memory node region_mfc_right
/dev/disk/by-uuid/4…0f3-9123-4bf8-9786-98906faf18f6...
[ 23.831188] s5p-mfc 11000000.codec: decoder registered as
/dev/video0
[ 23.874094] s5p-mfc 11000000.codec: encoder registered as
/dev/video1
[ 23.917279] s5p-jpeg 11f50000.jpeg: encoder device registered as
/dev/video2
[ 23.917954] Adding 499708k swap on /dev/mmcblk0p3. Priority:-1
extents:1 across:499708k SSFS
[ 23.945363] s5p-jpeg 11f50000.jpeg: decoder device registered as
/dev/video3
[ 23.951084] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[ OK ] Activated swap /dev/disk/by-uuid/444ba0f3-9123-4bf8-9786-
98906faf18f6.
[ OK ] Found devi[ 23.995548] s5p-jpeg 11f60000.jpeg: encoder
device registered as /dev/video4
ce /dev/disk/b[ 24.004242] s5p-jpeg 11f60000.jpeg: decoder device
registered as /dev/video5
[ 24.010727] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
y-uuid/0377ede3-065f-4468-b58c-41f39718981f.
[ OK ] Reached target Swap.
[ OK ] Started Mo[ 24.032740] audit: type=1130
audit(1498599927.620:73): pid=1 uid=0 auid=4294967295 ses=4294967295
subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
nitoring of LVM2 mirrors,…sing dmeventd or progress polling.
[ 24.086157] exynos-bus soc:bus_wcore: devfreq_add_device: Unable to
find governor for the device
[ 24.097637] devfreq devfreq0: releasing devfreq which doesn't exist
[ 24.102614] exynos-bus soc:bus_wcore: failed to add devfreq device
[ 24.109595] exynos-bus: probe of soc:bus_wcore failed with error -12
[ OK[ 37.646891] audit: type=1130 audit(1498599941.234:74): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=systemd-udev-settle comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
] Started udev Wait for Complete Device Initialization.
Starting Activation of DM RAID sets...
[ OK 37.845774] audit: type=1130 audit(1498599941.433:75): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=dmraid-activation comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ 37.867447] audit: type=1131 audit(1498599941.433:76): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=dmraid-activation comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
0m] Started Activation of DM RAID sets.
[ OK ] Reached target Local File Systems (Pre).
Mounting /boot...
[ OK ] Reached target Encrypted Volumes.
[ 37.925384] EXT4-fs (mmcblk0p2): mounted filesystem with ordered
data mode. Opts: (null)
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
Starting Restore /run/initramfs on shutdown...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Preprocess NFS configuration...
Starting Import network configuration from initramfs...
[ OK 37.995422] audit: type=1130 audit(1498599941.583:77): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=dracut-shutdown comm="systemd"
exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
0m] Started Restore /run/initramfs on shutdown.
[ OK 38.032194] audit: type=1130 audit(1498599941.620:78): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=plymouth-read-write comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ 38.053416] audit: type=1131 audit(1498599941.620:79): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=plymouth-read-write comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
0m] Started Te[ 38.076869] audit: type=1130 audit(1498599941.664:80):
pid=1 uid=0 auid=4294967295 ses=4294967295
subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ 38.097697] audit: type=1131 audit(1498599941.664:81): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=nfs-config comm="systemd"
exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
ll Plymouth To Write Out Runtime Data.
[ OK ] Started Preprocess NFS configuration.
[ OK 38.250750] audit: type=1130 audit(1498599941.838:82): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=fedora-import-state comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
0m] Started Import network configuration from initramfs.
Starting Create Volatile Files and Directories...
[ OK 38.605272] audit: type=1130 audit(1498599942.193:83): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=systemd-tmpfiles-setup comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
0m] Started Create Volatile Files and Directories.
Starting Security Auditing Service...
[ OK ] Started Security Auditing Service.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Reached target System Initialization.
[ OK ] Listening on Open-iSCSI iscsid Socket.
[ OK ] Started Updates mlocate database every day.
[ OK ] Listening on PC/SC Smart Card Daemon Activation Socket.
[ OK ] Listening on Open-iSCSI iscsiuio Socket.
[ OK ] Listening on Cockpit Web Service Socket.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Started dnf makecache timer.
[ OK ] Reached target Timers.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started Self Monitoring and Reporting Technology (SMART)
Daemon.
Starting Initial Setup configuration program...
[ OK ] Started irqbalance daemon.
Starting System Security Services Daemon...
[ OK ] Started D-Bus System Message Bus.
Starting System Logging Service...
Starting GSSAPI Proxy Daemon...
Starting ABRT Automated Bug Reporting Tool...
Starting NTP client/server...
Starting Authorization Manager...
[ OK ] Reached target sshd-keygen.target.
[ OK ] Started Hardware RNG Entropy Gatherer Daemon.
[ 48.753734] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 49.047719] Ebtables v2.0 registered
[ 49.798147] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 50.798282] bridge: filtering via arp/ip/ip6tables is no longer
available by default. Update your scripts to load br_netfilter if you
need this.
[ 51.590603] Netfilter messages via NETLINK v0.30.
[ 51.668881] ip_set: protocol 6
Fedora 26 (Server Edition)
Kernel 4.11.8-300.fc26.armv7hl on an armv7l (ttySAC2)
Admin Console: https://127.0.0.1:9090/ or https://[::ffff:127.0.0.1]:90
90/
localhost login:
9:56 a.m.
Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
---cut---
I setup a new SD card installing the released server image, and after
appending cpuidle.off=1 it booted fine
U-Boot 2017.05 (Jun 24 2017 - 16:40:39 +0000) for ODROID-XU3
CPU: Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type: xu4
DRAM: 2 GiB
MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
mmc_init: -5, time 3
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
523 bytes read in 20 ms (25.4 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command: autoboot
Ignoring malformed menu command: hidden
Ignoring unknown command: totaltimeout
Fedora-Server-armhfp-26-1.5 Boot Options.
1: Fedora-Server-armhfp-26-1.5 (4.11.8-300.fc26.armv7hl)
Enter choice: 1: Fedora-Server-armhfp-26-1.5 (4.11.8-
300.fc26.armv7hl)
Retrieving file: /initramfs-4.11.8-300.fc26.armv7hl.img
55990814 bytes read in 4195 ms (12.7 MiB/s)
Retrieving file: /vmlinuz-4.11.8-300.fc26.armv7hl
6267616 bytes read in 493 ms (12.1 MiB/s)
append: ro root=UUID=7b8bbc09-f016-489a-8288-fac9c8de58d0 cpuidle.off=1
Retrieving file: /dtb-4.11.8-300.fc26.armv7hl/exynos5422-odroidxu4.dtb
54941 bytes read in 83 ms (645.5 KiB/s)
Kernel image @ 0x42000000 [ 0x000000 - 0x5fa2e0 ]
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Ramdisk to 4ca9a000, end 4ffffa1e ... OK
Loading Device Tree to 4ca89000, end 4ca9969c ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x100
[ 0.000000] Linux version 4.11.8-300.fc26.armv7hl (mockbuild@buildvm
-armv7-13.arm.fedoraproject.org) (gcc version 7.1.1 20170622 (Red Hat
7.1.1-3) (GCC) ) #1 SMP Thu Jun 29 21:24:11 UTC 2017
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created DMA memory pool at 0xbe200000,
size 8 MiB
[ 0.000000] OF: reserved mem: initialized node region_mfc_right,
compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0xbbe00000,
size 36 MiB
[ 0.000000] OF: reserved mem: initialized node region_mfc_left,
compatible id shared-dma-pool
[ 0.000000] cma: Reserved 64 MiB at 0xb7c00000
[ 0.000000] Samsung CPU ID: 0xe5422001
[ 0.000000] Running under secure firmware.
[ 0.000000] percpu: Embedded 15 pages/cpu @eede0000 s31628 r8192
d21620 u61440
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping
on. Total pages: 505664
[ 0.000000] Kernel command line: ro root=UUID=7b8bbc09-f016-489a-
8288-fac9c8de58d0 cpuidle.off=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Memory: 1874804K/2029568K available (7440K kernel code,
1301K rwdata, 3528K rodata, 2048K init, 518K bss, 89228K reserved,
65536K cma-reserved, 1177600K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0a4408c (8433 kB)
[ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB)
[ 0.000000] .data : 0xc1000000 - 0xc1145584 (1302 kB)
[ 0.000000] .bss : 0xc1145584 - 0xc11c7160 ( 519 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32,
nr_cpu_ids=8
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] GIC physical location is 0x10481000
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps
every 89478484971ns
[ 0.007594] Console: colour dummy device 80x30
[ 0.008714] console [tty0] enabled
[ 0.008775] Calibrating delay loop (skipped), value calculated using
timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.008837] pid_max: default: 32768 minimum: 301
[ 0.009328] Security Framework initialized
[ 0.009365] Yama: becoming mindful.
[ 0.009411] SELinux: Initializing.
[ 0.009828] Mount-cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.009867] Mountpoint-cache hash table entries: 2048 (order: 1,
8192 bytes)
[ 0.011168] CPU: Testing write buffer coherency: ok
[ 0.011243] ftrace: allocating 31692 entries in 62 pages
[ 0.090880] CPU0: update cpu_capacity 448
[ 0.090930] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.091693] Setting up static identity map for 0x40300000 -
0x40300098
[ 0.092453] ARM CCI driver probed
[ 0.092685] Exynos MCPM support installed
[ 0.101290] EFI services will not be available.
[ 0.102011] smp: Bringing up secondary CPUs ...
[ 0.103107] CPU1: update cpu_capacity 448
[ 0.103115] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.104260] CPU2: update cpu_capacity 448
[ 0.104269] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.105407] CPU3: update cpu_capacity 448
[ 0.105415] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[ 0.106579] CPU4: update cpu_capacity 1535
[ 0.106588] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.107844] CPU5: update cpu_capacity 1535
[ 0.107852] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.109002] CPU6: update cpu_capacity 1535
[ 0.109010] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.110165] CPU7: update cpu_capacity 1535
[ 0.110173] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.110312] smp: Brought up 1 node, 8 CPUs
[ 0.110620] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[ 0.110649] CPU: WARNING: CPU(s) started in wrong/inconsistent modes
(primary CPU mode 0x1a)
[ 0.110687] CPU: This may indicate a broken bootloader or firmware.
[ 0.113441] devtmpfs: initialized
[ 0.136821] VFP support v0.3: implementor 41 architecture 2 part 30
variant 7 rev 3
[ 0.137415] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.137479] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.141949] pinctrl core: initialized pinctrl subsystem
[ 0.145547] NET: Registered protocol family 16
[ 0.147955] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.153971] No ATAGs?
[ 0.154337] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
watchpoint registers.
[ 0.154405] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.156236] Serial: AMBA PL011 UART driver
[ 0.169418] random: fast init done
[ 0.192895] EXYNOS5420 PMU initialized
[ 0.235545] vgaarb: loaded
[ 0.236599] SCSI subsystem initialized
[ 0.237323] usbcore: registered new interface driver usbfs
[ 0.237443] usbcore: registered new interface driver hub
[ 0.237650] usbcore: registered new device driver usb
[ 0.240275] NetLabel: Initializing
[ 0.240311] NetLabel: domain hash size = 128
[ 0.240335] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.240480] NetLabel: unlabeled traffic allowed by default
[ 0.241029] clocksource: Switched to clocksource mct-frc
[ 0.343777] VFS: Disk quotas dquot_6.6.0
[ 0.343936] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.362615] NET: Registered protocol family 2
[ 0.363955] TCP established hash table entries: 8192 (order: 3,
32768 bytes)
[ 0.364148] TCP bind hash table entries: 8192 (order: 4, 65536
bytes)
[ 0.364352] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.364622] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.364695] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.365342] NET: Registered protocol family 1
[ 0.366270] Unpacking initramfs...
[ 5.774142] Freeing initrd memory: 54680K
[ 5.844438] audit: initializing netlink subsys (disabled)
[ 5.844710] audit: type=2000 audit(5.788:1): state=initialized
audit_enabled=0 res=1
[ 5.845180] Initialise system trusted keyrings
[ 5.845422] workingset: timestamp_bits=14 max_order=19
bucket_order=5
[ 5.853389] zbud: loaded
[ 6.147911] NET: Registered protocol family 38
[ 6.147946] Key type asymmetric registered
[ 6.147969] Asymmetric key parser 'x509' registered
[ 6.148128] bounce: pool size: 64 pages
[ 6.148227] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 250)
[ 6.148463] io scheduler noop registered
[ 6.148487] io scheduler deadline registered
[ 6.148887] io scheduler cfq registered (default)
[ 6.148912] io scheduler mq-deadline registered
[ 6.149588] atomic64_test: passed
[ 6.175064] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 6.188016] Serial: AMBA driver
[ 6.188372] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58,
base_baud = 0) is a S3C6400/10
[ 6.188891] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59,
base_baud = 0) is a S3C6400/10
[ 6.189448] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60,
base_baud = 0) is a S3C6400/10
[ 6.942616] console [ttySAC2] enabled
[ 6.946790] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61,
base_baud = 0) is a S3C6400/10
[ 6.957384] msm_serial: driver initialized
[ 6.960394] STMicroelectronics ASC driver initialized
[ 6.969469] libphy: Fixed MDIO Bus: probed
[ 6.972858] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 6.978682] ehci-pci: EHCI PCI platform driver
[ 6.983130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.989234] ohci-pci: OHCI PCI platform driver
[ 6.993694] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.000334] usbcore: registered new interface driver usbserial
[ 7.005830] usbcore: registered new interface driver
usbserial_generic
[ 7.012320] usbserial: USB Serial support registered for generic
[ 7.018520] mousedev: PS/2 mouse device common for all mice
[ 7.031679] device-mapper: uevent: version 1.0.3
[ 7.035540] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
initialised: dm-devel(a)redhat.com
[ 7.044048] failed to register cpuidle driver
[ 7.048629] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.053967] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.059215] usbcore: registered new interface driver usbhid
[ 7.064502] usbhid: USB HID core driver
[ 7.071239] drop_monitor: Initializing network drop monitor service
[ 7.076334] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.081532] Initializing XFRM netlink socket
[ 7.086536] NET: Registered protocol family 10
[ 7.107078] Segment Routing with IPv6
[ 7.109372] mip6: Mobile IPv6
[ 7.112255] NET: Registered protocol family 17
[ 7.117361] ThumbEE CPU extension supported.
[ 7.120924] Registering SWP/SWPB emulation handler
[ 7.125690] big.LITTLE switcher initializing
[ 7.129931] CPU0 paired with CPU7
[ 7.133221] CPU1 paired with CPU6
[ 7.136511] CPU2 paired with CPU5
[ 7.139803] CPU3 paired with CPU4
[ 7.143100] GIC ID for CPU 0 cluster 1 is 4
[ 7.147259] GIC ID for CPU 1 cluster 1 is 5
[ 7.151418] GIC ID for CPU 2 cluster 1 is 6
[ 7.155577] GIC ID for CPU 3 cluster 1 is 7
[ 7.159736] GIC ID for CPU 0 cluster 0 is 0
[ 7.165557] IRQ54 no longer affine to CPU4
[ 7.169793] GIC ID for CPU 1 cluster 0 is 1
[ 7.177984] IRQ55 no longer affine to CPU5
[ 7.179350] GIC ID for CPU 2 cluster 0 is 2
[ 7.187498] IRQ56 no longer affine to CPU6
[ 7.191353] GIC ID for CPU 3 cluster 0 is 3
[ 7.199338] IRQ57 no longer affine to CPU7
[ 7.203698] big.LITTLE switcher initialized
[ 7.211711] registered taskstats version 1
[ 7.214667] Loading compiled-in X.509 certificates
[ 7.235598] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-
generic,sha256))
[ 7.250626] Loaded X.509 cert 'Fedora kernel signing key:
03162a918d07b67ba6af65b45b2ec58dafb524d8'
[ 7.258448] zswap: loaded using pool lzo/zbud
[ 7.279761] Key type big_key registered
[ 7.299023] Key type encrypted registered
[ 7.336596] hctosys: unable to open rtc device (rtc0)
[ 7.340260] sr_init: No PMIC hook to init smartreflex
[ 7.346139] sr_init: platform driver register failed for SR
[ 7.352906] samsung-uart 12c20000.serial: DMA request failed, DMA
will not be used
[ 7.364349] Freeing unused kernel memory: 2048K
[ 7.367723] rodata_test: test data was not read only
[ 7.411636] systemd[1]: System time before build time, advancing
clock.
[ 7.440586] systemd[1]: systemd 233 running in system mode. (+PAM
+AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN
default-hierarchy=hybrid)
[ 7.460108] systemd[1]: Detected architecture arm.
[ 7.464112] systemd[1]: Running in initial RAM disk.
Welcome to Fedora 26 (Server Edition) dracut-044-183.fc26 (Initramfs)!
[ 7.480205] systemd[1]: No hostname configured.
[ 7.483370] systemd[1]: Set hostname to <localhost>.
[ 7.488405] systemd[1]: Initializing machine ID from random
generator.
[ 7.940300] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 7.952524] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 7.964658] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 7.976229] systemd[1]: Reached target Timers.
[ OK ] Reached target Timers.
[ OK ] Listening on Journal Socket.
[ OK ] Reached target Swap.
[ OK ] Created slice System Slice.
[ OK ] Reached target Slices.
Starting Apply Kernel Variables...
Starting Setup Virtual Console...
[ OK ] Listening on Journal Socket (/dev/log).
Starting dracut cmdline hook...
[ OK ] Reached target Local File Systems.
Starting Create list of required st…ce nodes for the current
kernel...
Starting Journal Service...
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Setup Virtual Console.
[ OK ] Started Create list of required sta…vice nodes for the current
kernel.
[ 8.143378] audit: type=1130 audit(1498599911.731:2): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
Starting Create Static Device Nodes in /dev...
[ 8.188096] random: crng init done
[ OK ] Started Create Static Device Nodes in /dev.
[ 8.209520] audit: type=1130 audit(1498599911.797:3): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-
setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=? terminal=? res=success'
[ OK ] Started Journal Service.
[ 8.236759] audit: type=1130 audit(1498599911.824:4): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ OK ] Started dracut cmdline hook.
[ 9.263372] audit: type=1130 audit(1498599912.851:5): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
Starting Open-iSCSI...
Starting dracut pre-udev hook...
[ 9.321629] Loading iSCSI transport class v2.0-870.
[ OK ] Started Open-iSCSI.
[ 9.334509] audit: type=1130 audit(1498599912.922:6): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=iscsid
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 9.504725] RPC: Registered named UNIX socket transport module.
[ 9.509259] RPC: Registered udp transport module.
[ 9.513922] RPC: Registered tcp transport module.
[ 9.518600] RPC: Registered tcp NFSv4.1 backchannel transport
module.
[ 9.597623] dracut-pre-udev[344]: rpcbind:
/run/rpcbind/rpcbind.lock: No such file or directory
[ 9.902683] dracut-pre-udev[344]: rpc.idmapd: conf_reinit: open
("(null)", O_RDONLY) failed
[ 9.915135] dracut-pre-udev[344]: rpc.idmapd: conf_reinit: open
("(null)", O_RDONLY) failed
[ OK ] Started dracut pre-udev hook.
[ 10.099347] audit: type=1130 audit(1498599913.687:7): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
[ 10.160215] audit: type=1130 audit(1498599913.746:8): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
Starting dracut pre-trigger hook...
[ OK ] Started dracut pre-trigger hook.
[ 10.848421] audit: type=1130 audit(1498599914.436:9): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
Starting udev Coldplug all Devices...
Mounting Configuration File System...
[ OK ] Mounted Configuration File System.
[ OK ] Started udev Coldplug all Devices.
[ 11.461548] audit: type=1130 audit(1498599915.049:10): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-
trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=?
terminal=? res=success'
Starting dracut initqueue hook...
Starting Show Plymouth Boot Screen...
[ 11.693795] ehci-exynos: EHCI EXYNOS driver
[ OK ] Started Show Plymouth Bo[ 11.730091] audit: type=1130
audit(1498599915.314:11): pid=1 uid=0 auid=4294967295 ses=4294967295
subj=kernel msg='unit=plymouth-start comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
ot Screen.
[ OK ] Reached target Paths.
[ OK ] Reached target Encryp[ 11.755855] s5p-secss 10830000.sss:
s5p-sss driver registered
ted Volumes.
[ OK ] Reached target System Initialization.
[ OK ] Listening on Open-iSCSI iscsiuio Socket.
[ OK ] Reached target Sockets.
[ OK ] Started Forward Password Requests to Plymouth Directory Watch.
[ OK ] Reached target Basic System.
[ 11.834124] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply
vbus not found, using dummy regulator
[ 11.843580] ohci-exynos: OHCI EXYNOS driver
[ 11.848496] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply
vbus-boost not found, using dummy regulator
[ 11.868075] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd':
-517
[ 11.892071] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus
not found, using dummy regulator
[ 11.901041] s3c-i2c 12c80000.i2c: slave address 0x00
[ 11.902711] Synopsys Designware Multimedia Card Interface Driver
[ 11.905866] exynos-ehci 12110000.usb: EHCI Host Controller
[ 11.906355] exynos-ehci 12110000.usb: new USB bus registered,
assigned bus number 1
[ 11.923818] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
[ 11.934889] exynos-ehci 12110000.usb: irq 71, io mem 0x12110000
[ 11.935074] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
[ 11.936565] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply
vbus not found, using dummy regulator
[ 11.936671] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply
vbus-boost not found, using dummy regulator
[ 11.940105] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.978733] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[ 11.980290] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 11.980308] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.980384] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
[ 11.994247] exynos-rot 11c00000.rotator: The exynos rotator is
probed successfully
[ 11.996843] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 11.997154] dwmmc_exynos 12220000.mmc: Using internal DMA
controller.
[ 11.997171] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 11.997264] dwmmc_exynos 12220000.mmc: DW MMC controller at irq
74,64 bit host data width,64 deep fifo
[ 11.998889] exynos-drm-gsc 13e00000.video-scaler: failed to get
system register.
[ 11.999388] exynos-drm-gsc 13e00000.video-scaler: drm gsc registered
successfully.
[ 12.000830] exynos-drm-gsc 13e10000.video-scaler: failed to get
system register.
[ 12.001352] exynos-drm-gsc 13e10000.video-scaler: drm gsc registered
successfully.
[ 12.002677] exynos-drm-ipp exynos-drm-ipp: drm ipp registered
successfully.
[ 12.076945] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[ 12.083387] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 12.090537] usb usb1: Product: EHCI Host Controller
[ 12.095375] usb usb1: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
ehci_hcd
[ 12.102213] usb usb1: SerialNumber: 12110000.usb
[ 12.110520] hub 1-0:1.0: USB hub found
[ 12.112952] hub 1-0:1.0: 3 ports detected
[ 12.123321] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd':
-517
[ 12.129684] exynos-ohci 12120000.usb: USB Host Controller
[ 12.132875] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-
241330
[ 12.132886] dma-pl330 121a0000.pdma: DBUFF-32x4bytes
Num_Chans-8 Num_Peri-32 Num_Events-32
[ 12.148863] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-
241330
[ 12.148874] dma-pl330 121b0000.pdma: DBUFF-32x4bytes
Num_Chans-8 Num_Peri-32 Num_Events-32
[ 12.154459] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-
241330
[ 12.154469] dma-pl330 10800000.mdma: DBUFF-64x8bytes
Num_Chans-8 Num_Peri-1 Num_Events-32
[ 12.179312] exynos-ohci 12120000.usb: new USB bus registered,
assigned bus number 2
[ 12.186717] exynos-ohci 12120000.usb: irq 71, io mem 0x12120000
[ 12.249412] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001
[ 12.254855] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 12.262054] usb usb2: Product: USB Host Controller
[ 12.266772] usb usb2: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
ohci_hcd
[ 12.273610] usb usb2: SerialNumber: 12120000.usb
[ 12.281041] hub 2-0:1.0: USB hub found
[ 12.283459] hub 2-0:1.0: 3 ports detected
[ 12.293622] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.299310] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 12.305554] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.310956] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
[ 12.322534] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 12.328291] alloc_contig_range: [b7c47, b7c48) PFNs busy
[ 12.336196] dwmmc_exynos 12220000.mmc: Using internal DMA
controller.
[ 12.341258] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 12.346678] dwmmc_exynos 12220000.mmc: DW MMC controller at irq
74,64 bit host data width,64 deep fifo
[ 12.359839] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd':
-517
[ 12.414731] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.420618] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 12.426708] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.432156] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
[ 12.445423] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 12.448628] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[ 12.457174] dwmmc_exynos 12220000.mmc: Using internal DMA
controller.
[ 12.463229] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 12.465078] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[ 12.472535] vdd_ldo15: Bringing 3300000uV into 3100000-3100000uV
[ 12.480560] dwmmc_exynos 12220000.mmc: DW MMC controller at irq
74,64 bit host data width,64 deep fifo
[ 12.487626] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[ 12.517641] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req
400000Hz, actual 396825HZ div = 63)
[ 12.537145] dwmmc_exynos 12220000.mmc: 1 slots initialized
[ 12.543144] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[ 12.547485] s3c-rtc 101e0000.rtc: warning: invalid RTC value so
initializing it
[ 12.554827] rtc rtc1: invalid alarm value: 1900-1-2 0:0:0
[ 12.559264] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as
rtc0
[ 12.569209] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1
[ 12.577672] exynos-tmu 10060000.tmu: More trip points than supported
by this TMU.
[ 12.583801] exynos-tmu 10060000.tmu: 2 trip points should be
configured in polling mode.
[ 12.598403] OF: graph: no port node found in /soc/hdmi@14530000
[ 12.606934] [drm] Exynos DRM: using 14450000.mixer device for DMA
mapping operations
[ 12.613816] exynos-drm exynos-drm: bound 14450000.mixer (ops
mixer_component_ops [exynosdrm])
[ 12.622627] exynos-drm exynos-drm: bound 14530000.hdmi (ops
hdmi_component_ops [exynosdrm])
[ 12.630693] exynos-drm exynos-drm: bound exynos-drm-vidi (ops
vidi_component_ops [exynosdrm])
[ 12.638669] [drm] Supports vblank timestamp caching Rev 2
(21.10.2013).
[ 12.645218] [drm] No driver support for vblank timestamp query.
[ 12.651361] [drm] Initialized exynos 1.0.0 20110530 for exynos-drm
on minor 0
[ 12.670171] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req
50000000Hz, actual 50000000HZ div = 0)
[ 12.678644] mmc0: new high speed SDHC card at address 59b4
[ 12.684385] usb_phy_generic usb_phy_generic.0.auto:
usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[ 12.684895] usb_phy_generic usb_phy_generic.2.auto:
usb_phy_generic.2.auto supply vcc not found, using dummy regulator
[ 12.685494] usb_phy_generic usb_phy_generic.3.auto:
usb_phy_generic.3.auto supply vcc not found, using dummy regulator
[ 12.711086] mmcblk0: mmc0:59b4 00000 7.37 GiB
[ 12.720799] usb_phy_generic usb_phy_generic.1.auto:
usb_phy_generic.1.auto supply vcc not found, using dummy regulator
[ 12.734693] mmcblk0: p1 p2 p3 p4
[ 12.735582] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.735813] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 12.735832] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.735877] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
[ 12.767464] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.773470] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 12.779402] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.784782] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
[ 12.791900] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 12.792355] xhci-hcd xhci-hcd.4.auto: new USB bus registered,
assigned bus number 3
[ 12.793106] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220f04c hci
version 0x100 quirks 0x02010010
[ 12.793209] xhci-hcd xhci-hcd.4.auto: irq 135, io mem 0x12000000
[ 12.793548] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0002
[ 12.793558] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 12.793566] usb usb3: Product: xHCI Host Controller
[ 12.793573] usb usb3: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 12.793580] usb usb3: SerialNumber: xhci-hcd.4.auto
[ 12.794679] hub 3-0:1.0: USB hub found
[ 12.794751] hub 3-0:1.0: 1 port detected
[ 12.795499] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 12.795868] xhci-hcd xhci-hcd.4.auto: new USB bus registered,
assigned bus number 4
[ 12.796112] usb usb4: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 12.796354] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0003
[ 12.796364] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 12.796372] usb usb4: Product: xHCI Host Controller
[ 12.796379] usb usb4: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 12.796386] usb usb4: SerialNumber: xhci-hcd.4.auto
[ 12.797484] hub 4-0:1.0: USB hub found
[ 12.797553] hub 4-0:1.0: 1 port detected
[ 12.798344] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 12.798712] xhci-hcd xhci-hcd.5.auto: new USB bus registered,
assigned bus number 5
[ 12.799384] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220f04c hci
version 0x100 quirks 0x02010010
[ 12.799468] xhci-hcd xhci-hcd.5.auto: irq 136, io mem 0x12400000
[ 12.799801] usb usb5: New USB device found, idVendor=1d6b,
idProduct=0002
[ 12.799812] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 12.799820] usb usb5: Product: xHCI Host Controller
[ 12.799827] usb usb5: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 12.799834] usb usb5: SerialNumber: xhci-hcd.5.auto
[ 12.801066] hub 5-0:1.0: USB hub found
[ 12.801139] hub 5-0:1.0: 1 port detected
[ 12.801633] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 12.801950] xhci-hcd xhci-hcd.5.auto: new USB bus registered,
assigned bus number 6
[ 12.802159] usb usb6: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 12.802399] usb usb6: New USB device found, idVendor=1d6b,
idProduct=0003
[ 12.802410] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 12.802417] usb usb6: Product: xHCI Host Controller
[ 12.802425] usb usb6: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 12.802432] usb usb6: SerialNumber: xhci-hcd.5.auto
[ 12.803399] hub 6-0:1.0: USB hub found
[ 12.803466] hub 6-0:1.0: 1 port detected
[ OK ] Found de[ 13.046711] dwmmc_exynos 12200000.mmc: IDMAC
supports 32-bit address mode.
[ 13.053682] alloc_contig_range: [b7c49, b7c4a) PFNs busy
[ 13.058976] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 13.065226] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 13.070664] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
vice /dev/disk/by-uuid/7b8bbc09-f016-489a-8288-fac9c8de58d0.
[ OK ] Reached target Initrd Root Device.
[ OK 13.110810] audit: type=1130 audit(1498599916.698:12): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-
initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=? terminal=? res=success'
0m] Started dracut initqueue hook.
Starting dracut pre-mount hook...
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
[ OK 13.260087] audit: type=1130 audit(1498599916.847:13): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-
mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=?
terminal=? res=success'
0m] Started dracut pre-mount hook.
Starting File System Check on /dev/…c09-f016-489a-8288-
fac9c8de58d0...
[ OK 13.415704] audit: type=1130 audit(1498599917.003:14): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-
fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=? terminal=? res=success'
0m] Started File System Check on /dev/d…bbc09-f016-489a-8288-
fac9c8de58d0.
Mounting /sysroot...
[ 13.676603] SGI XFS with ACLs, security attributes, no debug enabled
[ 13.698391] XFS (mmcblk0p4): Mounting V5 Filesystem
[ 14.326779] XFS (mmcblk0p4): Ending clean mount
[ OK ] Mounted /sysroot.
[ OK ] Reached target Initrd Root File System.
Starting Reload Configuration from the Real Root...
[ OK 15.154176] audit: type=1130 audit(1498599918.742:15): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-
parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=? terminal=? res=success'
[ 15.173881] audit: type=1131 audit(1498599918.742:16): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
0m] Started Reload Configuration from the Real Root.
[ OK ] Reached target Initrd File Systems.
[ OK ] Reached target Initrd Default Target.
Starting dracut pre-pivot and cleanup hook...
[ 15.279632] usb usb3-port1: connect-debounce failed
[ OK 15.899414] audit: type=1130 audit(1498599919.487:17): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-
pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=?
terminal=? res=success'
[ 15.904966] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-
241330
[ 15.905074] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6
Num_Peri-16 Num_Events-6
[ 15.910090] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 15.918252] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 15.918272] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 15.918322] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
0m] Started dracut pre-pivot and cleanup hook.
Starting Cleaning Up and Shutting Down Daemons...
[ OK ] Stopped target Timers.
Starting Setup Virtual Console...
[ 16.011318] audit: type=1131 audit(1498599919.597:18): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
Starting Plymouth switch root service...
[ OK ] Stopped dracut pre-pivot and cleanup hoo[ 16.040472] audit:
type=1130 audit(1498599919.625:19): pid=1 uid=0 auid=4294967295
ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ 16.059276] audit: type=1131 audit(1498599919.625:20): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
k.
[ O[ 16.059898] audit: type=1130 audit(1498599919.647:21): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-
mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=?
terminal=? res=success'
[ 16.059976] audit: type=1131 audit(1498599919.647:22): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
K ] Stopped target Initrd Default Target.
[ 16.125953] audit: type=1130 audit(1498599919.713:23): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 16.145251] audit: type=1131 audit(1498599919.714:24): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 16.165087] audit: type=1130 audit(1498599919.733:25): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-
trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=?
terminal=? res=success'
m OK ] Sto[ 16.165113] audit: type=1131 audit(1498599919.733:26):
pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel
msg='unit=systemd-udev-trigger comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
pped target Initrd Root Device.
[ OK ] Stopped target Basic System.
[ OK ] Stopped target Sockets.
[ OK ] Closed Open-iSCSI iscsiuio Socket.
[ OK ] Stopped target System Initialization.
[ OK ] Stopped Apply Kernel Variables.
[ OK ] Stopped target Swap.
[ OK ] Stopped target Slices.
[ OK ] Stopped dracut pre-mount hook.
[ OK ] Stopped target Encrypted Volumes.
[ OK ] Stopped target Remote File Systems.
[ OK ] Stopped target Remote File Systems (Pre).
[ OK ] Stopped dracut initqueue hook.
[ OK ] Stopped udev Coldplug all Devices.
[ OK ] Stopped dracut pre-trigger hook.
Stopping udev Kernel Device Manager...
Stopping Open-iSCSI...
[ OK ] Stopped target Local File Systems.
[ OK ] Stopped target Paths.
[ OK ] Stopped udev Kernel Device Manager.
[ OK ] Started Setup Virtual Console.
[ OK ] Started Plymouth switch root service.
[ OK ] Stopped Open-iSCSI.
[ OK ] Stopped dracut pre-udev hook.
[ OK ] Stopped dracut cmdline hook.
[ OK ] Stopped Create Static Device Nodes in /dev.
[ OK ] Stopped Create list of required sta…vice nodes for the current
kernel.
[ OK ] Closed udev Kernel Socket.
[ OK ] Closed udev Control Socket.
Starting Cleanup udevd DB...
[ OK ] Started Cleaning Up and Shutting Down Daemons.
[ OK ] Started Cleanup udevd DB.
[ OK ] Reached target Switch Root.
Starting Switch Root...
[ 16.477957] systemd-journald[222]: Received SIGTERM from PID 1
(systemd).
[ 16.886362] systemd: 17 output lines suppressed due to ratelimiting
[ 18.126756] SELinux: Class sctp_socket not defined in policy.
[ 18.131191] SELinux: Class icmp_socket not defined in policy.
[ 18.137005] SELinux: Class ax25_socket not defined in policy.
[ 18.142782] SELinux: Class ipx_socket not defined in policy.
[ 18.148500] SELinux: Class netrom_socket not defined in policy.
[ 18.154480] SELinux: Class atmpvc_socket not defined in policy.
[ 18.160459] SELinux: Class x25_socket not defined in policy.
[ 18.166177] SELinux: Class rose_socket not defined in policy.
[ 18.172008] SELinux: Class decnet_socket not defined in policy.
[ 18.177962] SELinux: Class atmsvc_socket not defined in policy.
[ 18.183941] SELinux: Class rds_socket not defined in policy.
[ 18.189660] SELinux: Class irda_socket not defined in policy.
[ 18.195467] SELinux: Class pppox_socket not defined in policy.
[ 18.201358] SELinux: Class llc_socket not defined in policy.
[ 18.207078] SELinux: Class can_socket not defined in policy.
[ 18.212797] SELinux: Class tipc_socket not defined in policy.
[ 18.218603] SELinux: Class bluetooth_socket not defined in policy.
[ 18.224842] SELinux: Class iucv_socket not defined in policy.
[ 18.230649] SELinux: Class rxrpc_socket not defined in policy.
[ 18.236540] SELinux: Class isdn_socket not defined in policy.
[ 18.242526] SELinux: Class phonet_socket not defined in policy.
[ 18.248325] SELinux: Class ieee802154_socket not defined in policy.
[ 18.254653] SELinux: Class caif_socket not defined in policy.
[ 18.260456] SELinux: Class alg_socket not defined in policy.
[ 18.266176] SELinux: Class nfc_socket not defined in policy.
[ 18.271895] SELinux: Class vsock_socket not defined in policy.
[ 18.277787] SELinux: Class kcm_socket not defined in policy.
[ 18.283506] SELinux: Class qipcrtr_socket not defined in policy.
[ 18.289573] SELinux: Class smc_socket not defined in policy.
[ 18.295292] SELinux: the above unknown classes and permissions will
be allowed
[ 18.419669] systemd[1]: Successfully loaded SELinux policy in
1.045771s.
[ 18.803799] systemd[1]: Relabelled /dev and /run in 240.195ms.
Welcome to Fedora 26 (Server Edition)!
[ OK ] Stopped Switch Root.
[ OK ] Stopped Journal Service.
Starting Journal Service...
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Listening on udev Control Socket.
[ OK ] Created slice system-sshd\x2dkeygen.slice.
[ OK ] Created slice system-getty.slice.
[ OK ] Stopped target Switch Root.
[ OK ] Stopped target Initrd File Systems.
[ OK ] Stopped target Initrd Root File System.
Starting Create list of required st…ce nodes for the current
kernel...
[ OK ] Created slice system-serial\x2dgetty.slice.
Mounting POSIX Message Queue File System...
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ OK ] Reached target rpc_pipefs.target.
Starting Setup Virtual Console...
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on LVM2 metadata daemon socket.
[ OK ] Listening on LVM2 poll daemon socket.
[ OK ] Listening on Process Core Dump Socket.
[ OK ] Reached target Paths.
[ OK ] Created slice User and Session Slice.
[ OK ] Reached target Slices.
[ OK ] Listening on udev Kernel Socket.
Starting Monitoring of LVM2 mirrors…ng dmeventd or progress
polling...
Starting Apply Kernel Variables...
[ OK ] Set up automount Arbitrary Executab…rmats File System
Automount Point.
Mounting Debug File System...
[ OK ] Stopped File System Check on Root Device.
Starting Remount Root and Kernel File Systems...
[ OK ] Mounted Debug File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Journal Service.
[ OK ] Started Create list of required sta…vice nodes for the current
kernel.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started LVM2 metadata daemon.
[ OK ] Started Remount Root and Kernel File Systems.
Starting udev Coldplug all Devices...
Starting Flush Journal to Persistent Storage...
Starting Create Static Device Nodes in /dev...
Starting Configure read-only root support...
[ 20.480348] systemd-journald[676]: Received request to flush runtime
journal from PID 1
[ 20.681784] systemd-journald[676]: File
/var/log/journal/97e60d4efcaf4302880532e97752f587/system.journal
corrupted or uncleanly shut down, renaming and replacing.
[ OK ] Started Setup Virtual Console.
[ OK 20.985859] kauditd_printk_skb: 40 callbacks suppressed
[ 20.990463] audit: type=1130 audit(1498599924.573:67): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=fedora-readonly comm="systemd"
exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
0m] Started Configure read-only root support.
Starting Load/Save Random Seed...
[ OK 21.024637] audit: type=1130 audit(1498599924.612:68): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=systemd-tmpfiles-setup-dev comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
m] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Started Load/Save Random Seed.
[ 21.074691] audit: type=1130 audit(1498599924.658:69): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=systemd-random-seed comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ OK 21.158352] audit: type=1130 audit(1498599924.746:70): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=systemd-journal-flush comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
0m] Started Flush Journal to Persistent Storage.
[ OK 21.486290] audit: type=1130 audit(1498599925.074:71): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=systemd-udev-trigger comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
0m] Started udev Coldplug all Devices.
Starting udev Wait for Complete Device Initialization...
[ OK 22.472347] audit: type=1130 audit(1498599926.060:72): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=systemd-udevd comm="systemd"
exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
0m] Started udev Kernel Device Manager.
[ 23.040068] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 23.045833] dwmmc_exynos 12200000.mmc: Using internal DMA
controller.
[ 23.052090] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 23.059702] dwmmc_exynos 12200000.mmc: DW MMC controller at irq
73,64 bit host data width,64 deep fifo
[ 23.070530] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
[ 23.090821] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req
400000Hz, actual 396825HZ div = 63)
[ 23.110215] dwmmc_exynos 12200000.mmc: 1 slots initialized
[ 23.285490] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset
disabled, irq disabled
[ 23.330471] exynos-nocp: new NoC Probe device registered:
10ca1000.nocp
[ 23.340685] media: Linux media interface: v0.10
[ 23.345210] exynos-nocp: new NoC Probe device registered:
10ca1400.nocp
[ 23.355296] exynos-nocp: new NoC Probe device registered:
10ca1800.nocp
[ 23.362860] exynos-nocp: new NoC Probe device registered:
10ca1c00.nocp
[ 23.457606] Linux video capture interface: v2.00
[ OK ] Found device /dev/ttySAC2.
[ 23.783328] platform 11000000.codec:left: assigned reserved memory
node region_mfc_left
[ OK ] Found device /dev/disk/by-uuid/444ba0f3-9123-4bf8-9786-
98906faf18f6.
Activating swap [ 23.816915] platform 11000000.codec:right:
assigned reserved memory node region_mfc_right
/dev/disk/by-uuid/4…0f3-9123-4bf8-9786-98906faf18f6...
[ 23.831188] s5p-mfc 11000000.codec: decoder registered as
/dev/video0
[ 23.874094] s5p-mfc 11000000.codec: encoder registered as
/dev/video1
[ 23.917279] s5p-jpeg 11f50000.jpeg: encoder device registered as
/dev/video2
[ 23.917954] Adding 499708k swap on /dev/mmcblk0p3. Priority:-1
extents:1 across:499708k SSFS
[ 23.945363] s5p-jpeg 11f50000.jpeg: decoder device registered as
/dev/video3
[ 23.951084] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
[ OK ] Activated swap /dev/disk/by-uuid/444ba0f3-9123-4bf8-9786-
98906faf18f6.
[ OK ] Found devi[ 23.995548] s5p-jpeg 11f60000.jpeg: encoder
device registered as /dev/video4
ce /dev/disk/b[ 24.004242] s5p-jpeg 11f60000.jpeg: decoder device
registered as /dev/video5
[ 24.010727] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
y-uuid/0377ede3-065f-4468-b58c-41f39718981f.
[ OK ] Reached target Swap.
[ OK ] Started Mo[ 24.032740] audit: type=1130
audit(1498599927.620:73): pid=1 uid=0 auid=4294967295 ses=4294967295
subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
nitoring of LVM2 mirrors,…sing dmeventd or progress polling.
[ 24.086157] exynos-bus soc:bus_wcore: devfreq_add_device: Unable to
find governor for the device
[ 24.097637] devfreq devfreq0: releasing devfreq which doesn't exist
[ 24.102614] exynos-bus soc:bus_wcore: failed to add devfreq device
[ 24.109595] exynos-bus: probe of soc:bus_wcore failed with error -12
[ OK[ 37.646891] audit: type=1130 audit(1498599941.234:74): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=systemd-udev-settle comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
] Started udev Wait for Complete Device Initialization.
Starting Activation of DM RAID sets...
[ OK 37.845774] audit: type=1130 audit(1498599941.433:75): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=dmraid-activation comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ 37.867447] audit: type=1131 audit(1498599941.433:76): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=dmraid-activation comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
0m] Started Activation of DM RAID sets.
[ OK ] Reached target Local File Systems (Pre).
Mounting /boot...
[ OK ] Reached target Encrypted Volumes.
[ 37.925384] EXT4-fs (mmcblk0p2): mounted filesystem with ordered
data mode. Opts: (null)
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
Starting Restore /run/initramfs on shutdown...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Preprocess NFS configuration...
Starting Import network configuration from initramfs...
[ OK 37.995422] audit: type=1130 audit(1498599941.583:77): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=dracut-shutdown comm="systemd"
exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
0m] Started Restore /run/initramfs on shutdown.
[ OK 38.032194] audit: type=1130 audit(1498599941.620:78): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=plymouth-read-write comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ 38.053416] audit: type=1131 audit(1498599941.620:79): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=plymouth-read-write comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
0m] Started Te[ 38.076869] audit: type=1130 audit(1498599941.664:80):
pid=1 uid=0 auid=4294967295 ses=4294967295
subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ 38.097697] audit: type=1131 audit(1498599941.664:81): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=nfs-config comm="systemd"
exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
ll Plymouth To Write Out Runtime Data.
[ OK ] Started Preprocess NFS configuration.
[ OK 38.250750] audit: type=1130 audit(1498599941.838:82): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=fedora-import-state comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
0m] Started Import network configuration from initramfs.
Starting Create Volatile Files and Directories...
[ OK 38.605272] audit: type=1130 audit(1498599942.193:83): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='unit=systemd-tmpfiles-setup comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
0m] Started Create Volatile Files and Directories.
Starting Security Auditing Service...
[ OK ] Started Security Auditing Service.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Reached target System Initialization.
[ OK ] Listening on Open-iSCSI iscsid Socket.
[ OK ] Started Updates mlocate database every day.
[ OK ] Listening on PC/SC Smart Card Daemon Activation Socket.
[ OK ] Listening on Open-iSCSI iscsiuio Socket.
[ OK ] Listening on Cockpit Web Service Socket.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Started dnf makecache timer.
[ OK ] Reached target Timers.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started Self Monitoring and Reporting Technology (SMART)
Daemon.
Starting Initial Setup configuration program...
[ OK ] Started irqbalance daemon.
Starting System Security Services Daemon...
[ OK ] Started D-Bus System Message Bus.
Starting System Logging Service...
Starting GSSAPI Proxy Daemon...
Starting ABRT Automated Bug Reporting Tool...
Starting NTP client/server...
Starting Authorization Manager...
[ OK ] Reached target sshd-keygen.target.
[ OK ] Started Hardware RNG Entropy Gatherer Daemon.
[ 48.753734] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 49.047719] Ebtables v2.0 registered
[ 49.798147] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 50.798282] bridge: filtering via arp/ip/ip6tables is no longer
available by default. Update your scripts to load br_netfilter if you
need this.
[ 51.590603] Netfilter messages via NETLINK v0.30.
[ 51.668881] ip_set: protocol 6
Fedora 26 (Server Edition)
Kernel 4.11.8-300.fc26.armv7hl on an armv7l (ttySAC2)
Admin Console: https://127.0.0.1:9090/ or https://[::ffff:127.0.0.1]:90
90/
localhost login:
Hello Dennis,
that looks beautiful. You have a running Odroid-XU4 with actual Kernel
with Fedora 26 !!
How did you manage it? I haven't so much luck with the installation.
Thanks
Andreas
10:43 a.m.
El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
--
>
Hello Dennis,
that looks beautiful. You have a running Odroid-XU4 with actual
Kernel
with Fedora 26 !!
How did you manage it? I haven't so much luck with the installation.
Thanks
Andreas
I ran
xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB
cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
I grabbed from https://github.com/hardkernel/u-boot/tree/odroidxu4-v201
7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
tzsw.bin.hardkernel and sd_fusing.sh
then ran
sh sd_fusing.sh /dev/sdb
I used parted to resize partition 4 mounted it and ran xfs_growfs so it
filled the sd card
I mounted partition 2 and edited extlinux/extlinux.conf adding
cpuidle.off=1 to the append line. I did have to edit etc/passwd and
unlock the root account as initial-setup is not running.
of couse /dev/sdb was my sdcard, make sure you have the right device
for yours. It does seem that the nic is not detected however.
Dennis
11:13 a.m.
Hi Dennis,
I have been doing the same process as you with the exception that I
change the UUIDs in extlinux.conf and /etc/fstab. The other thing I do,
because I change update the UUIDs, is create a new initramfs. I will
try again later without creating a new initramfs to see if I can get to
where you are. BTW, I also am trying to load the Mate spin, not the
server release.
Can you try an experiment for me? Can you try to upgrade your system
doing a "dnf -y update" command. The reboot to ensure it reboots with
the new kernel? By doing the dnf upgrade, you will force the system to
use dracut to create a new initramfs image. Let's see if this now
works. This is essentially where the system began failing after f24.
We need some confidence that the upgrade process is not going to kill
our path forward.
Thanks.
Stewart
On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
> Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
> --
> Hello Dennis,
>
> that looks beautiful. You have a running Odroid-XU4 with actual
> Kernel
> with Fedora 26 !!
>
> How did you manage it? I haven't so much luck with the installation.
>
> Thanks
> Andreas
I ran
xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB
cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
I grabbed from https://github.com/hardkernel/u-boot/tree/odroidxu4-v201
7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
tzsw.bin.hardkernel and sd_fusing.sh
then ran
sh sd_fusing.sh /dev/sdb
I used parted to resize partition 4 mounted it and ran xfs_growfs so it
filled the sd card
I mounted partition 2 and edited extlinux/extlinux.conf adding
cpuidle.off=1 to the append line. I did have to edit etc/passwd and
unlock the root account as initial-setup is not running.
of couse /dev/sdb was my sdcard, make sure you have the right device
for yours. It does seem that the nic is not detected however.
Dennis
_______________________________________________
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
12:41 p.m.
El mié, 23-08-2017 a las 09:13 -0700, Stewart Samuels escribió:
Hi Dennis,
I have been doing the same process as you with the exception that I
change the UUIDs in extlinux.conf and /etc/fstab. The other thing I
do, because I change update the UUIDs, is create a new initramfs. I
will try again later without creating a new initramfs to see if I can
get to where you are. BTW, I also am trying to load the Mate spin,
not the server release.
Can you try an experiment for me? Can you try to upgrade your system
doing a "dnf -y update" command. The reboot to ensure it reboots
with the new kernel? By doing the dnf upgrade, you will force the
system to use dracut to create a new initramfs image. Let's see if
this now works. This is essentially where the system began failing
after f24. We need some confidence that the upgrade process is not
going to kill our path forward.
I plugged in a usb2 ethernet adapter and updated the system and it came
back fine, however I had to use a usb2 ethernet adapater in the usb2
port as it seems the usb3 port is not working, the ethernet onboard is
wired up via usb3. 4.12.5-300.fc26.armv7hl is the new kernel.
Dennis
Thanks.
Stewart
On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
> El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
> > Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
> > --
> >
> > Hello Dennis,
> >
> > that looks beautiful. You have a running Odroid-XU4 with actual
> > Kernel
> > with Fedora 26 !!
> >
> > How did you manage it? I haven't so much luck with the
> > installation.
> >
> > Thanks
> > Andreas
>
> I ran
>
> xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB
> cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
> cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
> I grabbed from https://github.com/hardkernel/u-boot/tree/odroidxu4-
> v201
> 7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
> tzsw.bin.hardkernel and sd_fusing.sh
> then ran
> sh sd_fusing.sh /dev/sdb
> I used parted to resize partition 4 mounted it and ran xfs_growfs
> so it
> filled the sd card
>
> I mounted partition 2 and edited extlinux/extlinux.conf adding
> cpuidle.off=1 to the append line. I did have to edit etc/passwd and
> unlock the root account as initial-setup is not running.
>
> of couse /dev/sdb was my sdcard, make sure you have the right
> device
> for yours. It does seem that the nic is not detected however.
>
> Dennis
>
>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
_______________________________________________
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
1:46 p.m.
Dennis,
Have you tried building the system on an eMMC card and booting that?
Just curious.
Thanks,
Stewart
On 08/23/2017 10:41 AM, Dennis Gilmore wrote:
El mié, 23-08-2017 a las 09:13 -0700, Stewart Samuels escribió:
> Hi Dennis,
>
> I have been doing the same process as you with the exception that I
> change the UUIDs in extlinux.conf and /etc/fstab. The other thing I
> do, because I change update the UUIDs, is create a new initramfs. I
> will try again later without creating a new initramfs to see if I can
> get to where you are. BTW, I also am trying to load the Mate spin,
> not the server release.
>
> Can you try an experiment for me? Can you try to upgrade your system
> doing a "dnf -y update" command. The reboot to ensure it reboots
> with the new kernel? By doing the dnf upgrade, you will force the
> system to use dracut to create a new initramfs image. Let's see if
> this now works. This is essentially where the system began failing
> after f24. We need some confidence that the upgrade process is not
> going to kill our path forward.
I plugged in a usb2 ethernet adapter and updated the system and it came
back fine, however I had to use a usb2 ethernet adapater in the usb2
port as it seems the usb3 port is not working, the ethernet onboard is
wired up via usb3. 4.12.5-300.fc26.armv7hl is the new kernel.
Dennis
> Thanks.
>
> Stewart
>
> On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
>> El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
>>> Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
>>> --
>>>
>>> Hello Dennis,
>>>
>>> that looks beautiful. You have a running Odroid-XU4 with actual
>>> Kernel
>>> with Fedora 26 !!
>>>
>>> How did you manage it? I haven't so much luck with the
>>> installation.
>>>
>>> Thanks
>>> Andreas
>> I ran
>>
>> xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB
>> cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
>> cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
>> I grabbed from https://github.com/hardkernel/u-boot/tree/odroidxu4-
>> v201
>> 7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
>> tzsw.bin.hardkernel and sd_fusing.sh
>> then ran
>> sh sd_fusing.sh /dev/sdb
>> I used parted to resize partition 4 mounted it and ran xfs_growfs
>> so it
>> filled the sd card
>>
>> I mounted partition 2 and edited extlinux/extlinux.conf adding
>> cpuidle.off=1 to the append line. I did have to edit etc/passwd and
>> unlock the root account as initial-setup is not running.
>>
>> of couse /dev/sdb was my sdcard, make sure you have the right
>> device
>> for yours. It does seem that the nic is not detected however.
>>
>> Dennis
>>
>>
>> _______________________________________________
>> arm mailing list -- arm(a)lists.fedoraproject.org
>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
2:16 p.m.
El mié, 23-08-2017 a las 11:46 -0700, Stewart Samuels escribió:
Dennis,
Have you tried building the system on an eMMC card and booting that?
Just curious.
Thanks,
Stewart
I have not, I do not have a emmc card
Dennis
On 08/23/2017 10:41 AM, Dennis Gilmore wrote:
> El mié, 23-08-2017 a las 09:13 -0700, Stewart Samuels escribió:
> > Hi Dennis,
> >
> > I have been doing the same process as you with the exception that
> > I
> > change the UUIDs in extlinux.conf and /etc/fstab. The other
> > thing I
> > do, because I change update the UUIDs, is create a new
> > initramfs. I
> > will try again later without creating a new initramfs to see if I
> > can
> > get to where you are. BTW, I also am trying to load the Mate
> > spin,
> > not the server release.
> >
> > Can you try an experiment for me? Can you try to upgrade your
> > system
> > doing a "dnf -y update" command. The reboot to ensure it reboots
> > with the new kernel? By doing the dnf upgrade, you will force
> > the
> > system to use dracut to create a new initramfs image. Let's see
> > if
> > this now works. This is essentially where the system began
> > failing
> > after f24. We need some confidence that the upgrade process is
> > not
> > going to kill our path forward.
>
> I plugged in a usb2 ethernet adapter and updated the system and it
> came
> back fine, however I had to use a usb2 ethernet adapater in the
> usb2
> port as it seems the usb3 port is not working, the ethernet onboard
> is
> wired up via usb3. 4.12.5-300.fc26.armv7hl is the new kernel.
>
>
> Dennis
>
> > Thanks.
> >
> > Stewart
> >
> > On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
> > > El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
> > > > Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
> > > > --
> > > >
> > > > Hello Dennis,
> > > >
> > > > that looks beautiful. You have a running Odroid-XU4 with
> > > > actual
> > > > Kernel
> > > > with Fedora 26 !!
> > > >
> > > > How did you manage it? I haven't so much luck with the
> > > > installation.
> > > >
> > > > Thanks
> > > > Andreas
> > >
> > > I ran
> > >
> > > xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb
> > > bs=4MiB
> > > cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
> > > cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
> > > I grabbed from https://github.com/hardkernel/u-boot/tree/odroid
> > > xu4-
> > > v201
> > > 7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
> > > tzsw.bin.hardkernel and sd_fusing.sh
> > > then ran
> > > sh sd_fusing.sh /dev/sdb
> > > I used parted to resize partition 4 mounted it and ran
> > > xfs_growfs
> > > so it
> > > filled the sd card
> > >
> > > I mounted partition 2 and edited extlinux/extlinux.conf adding
> > > cpuidle.off=1 to the append line. I did have to edit etc/passwd
> > > and
> > > unlock the root account as initial-setup is not running.
> > >
> > > of couse /dev/sdb was my sdcard, make sure you have the right
> > > device
> > > for yours. It does seem that the nic is not detected however.
> > >
> > > Dennis
> > >
> > >
> > > _______________________________________________
> > > arm mailing list -- arm(a)lists.fedoraproject.org
> > > To unsubscribe send an email to arm-leave(a)lists.fedoraproject.o
> > > rg
> >
> >
> > _______________________________________________
> > arm mailing list -- arm(a)lists.fedoraproject.org
> > To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
> >
> >
> > _______________________________________________
> > arm mailing list -- arm(a)lists.fedoraproject.org
> > To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
_______________________________________________
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
6:47 p.m.
All,
I have been working toward getting the Odroid-Xu4 to boot from the eMMC
card but the system continues to fail in the same place no matter what I
try. It dumps me into the dracut shell when it cannot find the root
partition. I suspect one or more modules are not being loaded when
booting from the eMMC. Following is my serial console output along with
some output from the dracut shell. Does anyone have any ideas of what
to try next?
Stewart
-----------------------------------------------------------------------------------------------------
U-Boot 2017.05 (Jun 24 2017 - 16:40:39 +0000) for ODROID-XU3
CPU: Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type: xu4
DRAM: 2 GiB
MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
mmc_init: -95, time 11
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:2...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
528 bytes read in 13 ms (39.1 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command: autoboot
Ignoring malformed menu command: hidden
Ignoring unknown command: totaltimeout
Fedora-Mate-armhfp-26-1.5 Boot Options.
1: Fedora-Mate-armhfp-26-1.5 (4.11.8-300.fc26.armv7hl)
Enter choice: 1: Fedora-Mate-armhfp-26-1.5 (4.11.8-300.fc26.armv7hl)
Retrieving file: /initramfs-4.11.8-300.fc26.armv7hl.img
55202128 bytes read in 2514 ms (20.9 MiB/s)
Retrieving file: /vmlinuz-4.11.8-300.fc26.armv7hl
6267616 bytes read in 291 ms (20.5 MiB/s)
append: ro root=UUID=bb8b773e-78ec-478f-807b-267067854356 cma=192MB
cpuidle.off=1
Retrieving file: /dtb-4.11.8-300.fc26.armv7hl/exynos5422-odroidxu4.dtb
54941 bytes read in 126 ms (425.8 KiB/s)
Kernel image @ 0x42000000 [ 0x000000 - 0x5fa2e0 ]
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Ramdisk to 4cb5a000, end 4ffff150 ... OK
Loading Device Tree to 4cb49000, end 4cb5969c ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x100
[ 0.000000] Linux version 4.11.8-300.fc26.armv7hl
(mockbuild(a)buildvm-armv7-13.arm.fedoraproject.org) (gcc vers7
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created DMA memory pool at 0xbe200000,
size 8 MiB
[ 0.000000] OF: reserved mem: initialized node region_mfc_right,
compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0xbbe00000,
size 36 MiB
[ 0.000000] OF: reserved mem: initialized node region_mfc_left,
compatible id shared-dma-pool
[ 0.000000] cma: Reserved 192 MiB at 0xafc00000
[ 0.000000] Samsung CPU ID: 0xe5422001
[ 0.000000] Running under secure firmware.
[ 0.000000] percpu: Embedded 15 pages/cpu @eede0000 s31628 r8192
d21620 u61440
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 505664
[ 0.000000] Kernel command line: ro
root=UUID=bb8b773e-78ec-478f-807b-267067854356 cma=192MB cpuidle.off=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Memory: 1744500K/2029568K available (7440K kernel code,
1301K rwdata, 3528K rodata, 2048K init, 51)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0a4408c (8433 kB)
[ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB)
[ 0.000000] .data : 0xc1000000 - 0xc1145584 (1302 kB)
[ 0.000000] .bss : 0xc1145584 - 0xc11c7160 ( 519 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] GIC physical location is 0x10481000
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps
every 89478484971ns
[ 0.007585] Console: colour dummy device 80x30
[ 0.008704] console [tty0] enabled
[ 0.008766] Calibrating delay loop (skipped), value calculated using
timer frequency.. 48.00 BogoMIPS (lpj=240)
[ 0.008828] pid_max: default: 32768 minimum: 301
[ 0.009320] Security Framework initialized
[ 0.009357] Yama: becoming mindful.
[ 0.009403] SELinux: Initializing.
[ 0.009822] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.009861] Mountpoint-cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.011159] CPU: Testing write buffer coherency: ok
[ 0.011233] ftrace: allocating 31692 entries in 62 pages
[ 0.090865] CPU0: update cpu_capacity 448
[ 0.090914] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.091676] Setting up static identity map for 0x40300000 - 0x40300098
[ 0.092440] ARM CCI driver probed
[ 0.092672] Exynos MCPM support installed
[ 0.101281] EFI services will not be available.
[ 0.102000] smp: Bringing up secondary CPUs ...
[ 0.103095] CPU1: update cpu_capacity 448
[ 0.103103] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.104251] CPU2: update cpu_capacity 448
[ 0.104259] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.105400] CPU3: update cpu_capacity 448
[ 0.105408] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[ 0.106584] CPU4: update cpu_capacity 1535
[ 0.106593] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.107856] CPU5: update cpu_capacity 1535
[ 0.107864] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.109035] CPU6: update cpu_capacity 1535
[ 0.109043] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.110200] CPU7: update cpu_capacity 1535
[ 0.110208] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.110349] smp: Brought up 1 node, 8 CPUs
[ 0.110657] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[ 0.110685] CPU: WARNING: CPU(s) started in wrong/inconsistent modes
(primary CPU mode 0x1a)
[ 0.110723] CPU: This may indicate a broken bootloader or firmware.
[ 0.113454] devtmpfs: initialized
[ 0.136876] VFP support v0.3: implementor 41 architecture 2 part 30
variant 7 rev 3
[ 0.137473] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.137537] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.149375] pinctrl core: initialized pinctrl subsystem
[ 0.153003] NET: Registered protocol family 16
[ 0.155459] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.161493] No ATAGs?
[ 0.161838] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
watchpoint registers.
[ 0.161906] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.163736] Serial: AMBA PL011 UART driver
[ 0.169411] random: fast init done
[ 0.200492] EXYNOS5420 PMU initialized
[ 0.243158] vgaarb: loaded
[ 0.244211] SCSI subsystem initialized
[ 0.244931] usbcore: registered new interface driver usbfs
[ 0.245050] usbcore: registered new interface driver hub
[ 0.245287] usbcore: registered new device driver usb
[ 0.247929] NetLabel: Initializing
[ 0.247967] NetLabel: domain hash size = 128
[ 0.247991] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.248103] NetLabel: unlabeled traffic allowed by default
[ 0.248660] clocksource: Switched to clocksource mct-frc
[ 0.351411] VFS: Disk quotas dquot_6.6.0
[ 0.351568] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.370121] NET: Registered protocol family 2
[ 0.371475] TCP established hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.371613] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.371870] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.372147] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.372220] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.372873] NET: Registered protocol family 1
[ 0.373809] Unpacking initramfs...
[ 4.696760] Freeing initrd memory: 53912K
[ 4.773519] audit: initializing netlink subsys (disabled)
[ 4.773831] audit: type=2000 audit(4.718:1): state=initialized
audit_enabled=0 res=1
[ 4.774223] Initialise system trusted keyrings
[ 4.774476] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 4.782338] zbud: loaded
[ 5.074210] NET: Registered protocol family 38
[ 5.074246] Key type asymmetric registered
[ 5.074270] Asymmetric key parser 'x509' registered
[ 5.074358] bounce: pool size: 64 pages
[ 5.074459] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 250)
[ 5.074760] io scheduler noop registered
[ 5.074783] io scheduler deadline registered
[ 5.075189] io scheduler cfq registered (default)
[ 5.075213] io scheduler mq-deadline registered
[ 5.075851] atomic64_test: passed
[ 5.100117] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 5.109596] Serial: AMBA driver
[ 5.109928] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58,
base_baud = 0) is a S3C6400/10
[ 5.110350] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59,
base_baud = 0) is a S3C6400/10
[ 5.110803] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60,
base_baud = 0) is a S3C6400/10
[ 5.865084] console [ttySAC2] enabled
[ 5.869123] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61,
base_baud = 0) is a S3C6400/10
[ 5.879738] msm_serial: driver initialized
[ 5.882776] STMicroelectronics ASC driver initialized
[ 5.892040] libphy: Fixed MDIO Bus: probed
[ 5.895492] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.901250] ehci-pci: EHCI PCI platform driver
[ 5.905747] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.911807] ohci-pci: OHCI PCI platform driver
[ 5.916285] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.922920] usbcore: registered new interface driver usbserial
[ 5.928397] usbcore: registered new interface driver usbserial_generic
[ 5.934888] usbserial: USB Serial support registered for generic
[ 5.941100] mousedev: PS/2 mouse device common for all mice
[ 5.954259] device-mapper: uevent: version 1.0.3
[ 5.958122] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
initialised: dm-devel(a)redhat.com
[ 5.966597] failed to register cpuidle driver
[ 5.971278] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.976534] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.981802] usbcore: registered new interface driver usbhid
[ 5.987080] usbhid: USB HID core driver
[ 5.993804] drop_monitor: Initializing network drop monitor service
[ 5.998938] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.004108] Initializing XFRM netlink socket
[ 6.009102] NET: Registered protocol family 10
[ 6.029584] Segment Routing with IPv6
[ 6.031888] mip6: Mobile IPv6
[ 6.034762] NET: Registered protocol family 17
[ 6.039879] ThumbEE CPU extension supported.
[ 6.043429] Registering SWP/SWPB emulation handler
[ 6.048195] big.LITTLE switcher initializing
[ 6.052437] CPU0 paired with CPU7
[ 6.055728] CPU1 paired with CPU6
[ 6.059017] CPU2 paired with CPU5
[ 6.062309] CPU3 paired with CPU4
[ 6.065603] GIC ID for CPU 0 cluster 1 is 4
[ 6.069765] GIC ID for CPU 1 cluster 1 is 5
[ 6.073924] GIC ID for CPU 2 cluster 1 is 6
[ 6.078083] GIC ID for CPU 3 cluster 1 is 7
[ 6.082242] GIC ID for CPU 0 cluster 0 is 0
[ 6.087715] NOHZ: local_softirq_pending 02
[ 6.090532] NOHZ: local_softirq_pending 202
[ 6.094899] IRQ54 no longer affine to CPU4
[ 6.098764] GIC ID for CPU 1 cluster 0 is 1
[ 6.107119] IRQ55 no longer affine to CPU5
[ 6.111044] GIC ID for CPU 2 cluster 0 is 2
[ 6.119163] IRQ56 no longer affine to CPU6
[ 6.122846] GIC ID for CPU 3 cluster 0 is 3
[ 6.130992] IRQ57 no longer affine to CPU7
[ 6.135268] big.LITTLE switcher initialized
[ 6.143165] registered taskstats version 1
[ 6.146373] Loading compiled-in X.509 certificates
[ 6.167521] alg: No test for pkcs1pad(rsa,sha256)
(pkcs1pad(rsa-generic,sha256))
[ 6.182580] Loaded X.509 cert 'Fedora kernel signing key:
03162a918d07b67ba6af65b45b2ec58dafb524d8'
[ 6.190397] zswap: loaded using pool lzo/zbud
[ 6.212160] Key type big_key registered
[ 6.231599] Key type encrypted registered
[ 6.269232] hctosys: unable to open rtc device (rtc0)
[ 6.272898] sr_init: No PMIC hook to init smartreflex
[ 6.278792] sr_init: platform driver register failed for SR
[ 6.285575] samsung-uart 12c20000.serial: DMA request failed, DMA
will not be used
[ 6.296961] Freeing unused kernel memory: 2048K
[ 6.300340] rodata_test: test data was not read only
[ 6.343948] systemd[1]: System time before build time, advancing clock.
[ 6.372566] systemd[1]: systemd 233 running in system mode. (+PAM
+AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVI)
[ 6.392143] systemd[1]: Detected architecture arm.
[ 6.396079] systemd[1]: Running in initial RAM disk.
Welcome to Fedora 26 (Twenty Six) dracut-044-183.fc26 (Initramfs)!
[ 6.410884] systemd[1]: No hostname configured.
[ 6.414048] systemd[1]: Set hostname to <localhost>.
[ 6.419081] systemd[1]: Initializing machine ID from random generator.
[ 6.877445] systemd[1]: Reached target Local File Systems.
[ OK ] Reached target Local File Systems.
[ 6.889203] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 6.902897] systemd[1]: Reached target Timers.
[ OK ] Reached target Timers.
[ 6.917747] systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
[ OK ] Listening on Journal Audit Socket.
[ OK ] Listening on Journal Socket.
Starting Journal Service...
Starting Create list of required st��…ce nodes for the current
kernel...
[ OK ] Reached target Swap.
Starting dracut cmdline hook...
Starting Apply Kernel Variables...
[ OK ] Listening on udev Control Socket.
Starting Setup Virtual Console...
[ OK ] Reached target Slices.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Started Create list of required sta��…vice nodes for the
current kernel.
[ 7.072443] audit: type=1130 audit(1498599911.727:2): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
[ OK ] Started Apply Kernel Variables.
[ 7.099050] audit: type=1130 audit(1498599911.754:3): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
[ OK ] Started Setup Virtual Console.
[ 7.125167] audit: type=1130 audit(1498599911.780:4): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
[ 7.144205] audit: type=1131 audit(1498599911.780:5): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
[ OK ] Started Journal Service.
[ 7.172398] audit: type=1130 audit(1498599911.827:6): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
Starting Create Static Device Nodes in /dev...
[ OK ] Started Create Static Device Nodes in /dev.
[ 7.245188] audit: type=1130 audit(1498599911.900:7): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
[ 7.546737] random: crng init done
[ OK ] Started dracut cmdline hook.
[ 8.234003] audit: type=1130 audit(1498599912.889:8): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
Starting dracut pre-udev hook...
Starting Open-iSCSI...
[ 8.316363] Loading iSCSI transport class v2.0-870.
[ OK ] Started Open-iSCSI.
[ 8.330246] audit: type=1130 audit(1498599912.985:9): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
[ 8.457192] RPC: Registered named UNIX socket transport module.
[ 8.461721] RPC: Registered udp transport module.
[ 8.466393] RPC: Registered tcp transport module.
[ 8.471061] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.550444] dracut-pre-udev[342]: rpcbind: /run/rpcbind/rpcbind.lock:
No such file or directory
[ 8.854940] dracut-pre-udev[342]: rpc.idmapd: conf_reinit: open
("(null)", O_RDONLY) failed
[ 8.867293] dracut-pre-udev[342]: rpc.idmapd: conf_reinit: open
("(null)", O_RDONLY) failed
[ OK ] Started dracut pre-udev hook.
[ 9.054008] audit: type=1130 audit(1498599913.709:10): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel '
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
Starting dracut pre-trigger hook...
[ OK ] Started dracut pre-trigger hook.
[ 9.814057] kauditd_printk_skb: 1 callbacks suppressed
[ 9.817827] audit: type=1130 audit(1498599914.469:12): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel '
Starting udev Coldplug all Devices...
Mounting Configuration File System...
[ OK ] Mounted Configuration File System.
[ OK ] Started udev Coldplug all Devices.
[ 10.426334] audit: type=1130 audit(1498599915.081:13): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel '
Starting Show Plymouth Boot Screen...
Starting dracut initqueue hook...
[ OK ] Started Show Plymouth Boot Screen.
[ 10.669761] audit: type=1130 audit(1498599915.318:14): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel '
[ OK ] Started Forward Password[ 10.699401] s5p-secss 10830000.sss:
s5p-sss driver registered
Requests to Plymouth Directory Watch.
[ OK ] Reached target Paths.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Reached target System Initialization.
[ OK ] Listening on Open-iSCSI iscsiuio Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ 10.762529] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply
vbus not found, using dummy regulator
[ 10.762533] ehci-exynos: EHCI EXYNOS driver
[ 10.766956] ohci-exynos: OHCI EXYNOS driver
[ 10.811491] Synopsys Designware Multimedia Card Interface Driver
[ 10.818940] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply
vbus-boost not found, using dummy regulator
[ 10.848564] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus
not found, using dummy regulator
[ 10.864878] exynos-ehci 12110000.usb: EHCI Host Controller
[ 10.871403] exynos-ehci 12110000.usb: new USB bus registered,
assigned bus number 1
[ 10.878217] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 10.890033] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 10.890204] exynos-ehci 12110000.usb: irq 71, io mem 0x12110000
[ 10.896742] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[ 10.897199] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.897209] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.897217] usb usb1: Product: EHCI Host Controller
[ 10.897225] usb usb1: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
ehci_hcd
[ 10.897232] usb usb1: SerialNumber: 12110000.usb
[ 10.898319] hub 1-0:1.0: USB hub found
[ 10.898390] hub 1-0:1.0: 3 ports detected
[ 10.900254] exynos-ohci 12120000.usb: USB Host Controller
[ 10.900705] exynos-ohci 12120000.usb: new USB bus registered,
assigned bus number 2
[ 10.901134] exynos-ohci 12120000.usb: irq 71, io mem 0x12120000
[ 10.957074] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.957085] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.957094] usb usb2: Product: USB Host Controller
[ 10.957101] usb usb2: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
ohci_hcd
[ 10.957108] usb usb2: SerialNumber: 12120000.usb
[ 10.958124] hub 2-0:1.0: USB hub found
[ 10.958183] hub 2-0:1.0: 3 ports detected
[ 11.001700] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.008838] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.021322] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply
vbus not found, using dummy regulator
[ 11.023591] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.030892] alloc_contig_range: [afc41, afc42) PFNs busy
[ 11.031014] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.031030] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.031076] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.062740] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply
vbus-boost not found, using dummy regulator
[ 11.081744] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.088726] alloc_contig_range: [afc41, afc42) PFNs busy
[ 11.105107] alloc_contig_range: [afc45, afc46) PFNs busy
[ 11.109159] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.115512] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.120894] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.121327] s3c-i2c 12c80000.i2c: slave address 0x00
[ 11.121341] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
[ 11.122217] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
[ 11.126174] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 11.159579] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.164290] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[ 11.164301] dma-pl330 121a0000.pdma: DBUFF-32x4bytes
Num_Chans-8 Num_Peri-32 Num_Events-32
[ 11.164467] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 11.164483] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 11.164566] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 74,64
bit host data width,64 deep fifo
[ 11.169840] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517
[ 11.171326] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[ 11.171338] dma-pl330 121b0000.pdma: DBUFF-32x4bytes
Num_Chans-8 Num_Peri-32 Num_Events-32
[ 11.174209] exynos-rot 11c00000.rotator: The exynos rotator is probed
successfully
[ 11.175376] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[ 11.175387] dma-pl330 10800000.mdma: DBUFF-64x8bytes
Num_Chans-8 Num_Peri-1 Num_Events-32
[ 11.175433] exynos-drm-gsc 13e00000.video-scaler: failed to get
system register.
[ 11.176513] exynos-drm-gsc 13e00000.video-scaler: drm gsc registered
successfully.
[ 11.177436] exynos-drm-gsc 13e10000.video-scaler: failed to get
system register.
[ 11.179841] exynos-drm-gsc 13e10000.video-scaler: drm gsc registered
successfully.
[ 11.185790] exynos-drm-ipp exynos-drm-ipp: drm ipp registered
successfully.
[ 11.214737] usb 1-1: new high-speed USB device number 2 using exynos-ehci
[ 11.295241] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.300322] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.305733] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.323932] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 11.329594] alloc_contig_range: [afc47, afc48) PFNs busy
[ 11.334962] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 11.341123] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 11.346542] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 74,64
bit host data width,64 deep fifo
[ 11.358028] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517
[ 11.367188] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.372770] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[ 11.372870] alloc_contig_range: [afc47, afc48) PFNs busy
[ 11.372890] alloc_contig_range: [afc48, afc49) PFNs busy
[ 11.372984] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.372999] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.373048] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.410969] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 11.418090] usb 1-1: Product: USB2.0 Hub
[ 11.421982] usb 1-1: Manufacturer: GenesysLogic
[ 11.432408] hub 1-1:1.0: USB hub found
[ 11.435409] hub 1-1:1.0: 4 ports detected
[ 11.453320] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[ 11.457741] rtc rtc1: invalid alarm value: 1900-1-2 0:0:0
[ 11.465597] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1
[ 11.472950] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0
[ 11.473753] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 11.484940] alloc_contig_range: [afc47, afc48) PFNs busy
[ 11.490187] alloc_contig_range: [afc48, afc49) PFNs busy
[ 11.495463] alloc_contig_range: [afc49, afc4a) PFNs busy
[ 11.500838] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 11.507144] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 11.512537] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 74,64
bit host data width,64 deep fifo
[ 11.518743] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[ 11.535534] OF: graph: no port node found in /soc/hdmi@14530000
[ 11.538414] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[ 11.551079] vdd_ldo15: Bringing 3300000uV into 3100000-3100000uV
[ 11.552808] [drm] Exynos DRM: using 14450000.mixer device for DMA
mapping operations
[ 11.553253] exynos-drm exynos-drm: bound 14450000.mixer (ops
mixer_component_ops [exynosdrm])
[ 11.553631] exynos-drm exynos-drm: bound 14530000.hdmi (ops
hdmi_component_ops [exynosdrm])
[ 11.554085] exynos-drm exynos-drm: bound exynos-drm-vidi (ops
vidi_component_ops [exynosdrm])
[ 11.554093] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.554097] [drm] No driver support for vblank timestamp query.
G[ 11.610564] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[ 11.685743] Console: switching to colour frame buffer device 240x67
[ 11.732747] usb 1-1.1: new high-speed USB device number 3 using
exynos-ehci
[ 11.763627] exynos-drm exynos-drm: fb0: frame buffer device
[ 11.770763] [drm] Initialized exynos 1.0.0 20110530 for exynos-drm on
minor 0
[ 11.793054] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.811511] usb_phy_generic usb_phy_generic.0.auto:
usb_phy_generic.0.auto supply vcc not found, using dummy rr
[ 11.821616] usb_phy_generic usb_phy_generic.1.auto:
usb_phy_generic.1.auto supply vcc not found, using dummy rr
[ 11.823369] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.823388] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.823438] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.845781] exynos-tmu 10060000.tmu: More trip points than supported
by this TMU.
[ 11.845792] exynos-tmu 10060000.tmu: 2 trip points should be
configured in polling mode.
[ 11.868737] usb_phy_generic usb_phy_generic.2.auto:
usb_phy_generic.2.auto supply vcc not found, using dummy rr
[ 11.879438] usb_phy_generic usb_phy_generic.3.auto:
usb_phy_generic.3.auto supply vcc not found, using dummy rr
[ 11.891929] usb 1-1.1: New USB device found, idVendor=7392,
idProduct=7811
[ 11.893724] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 11.894117] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 11.894135] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 11.894173] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 74,64
bit host data width,64 deep fifo
[ 11.910601] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req
400000Hz, actual 396825HZ div = 63)
[ 11.912424] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 11.912896] xhci-hcd xhci-hcd.4.auto: new USB bus registered,
assigned bus number 3
[ 11.913876] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220f04c hci
version 0x100 quirks 0x02010010
[ 11.913951] xhci-hcd xhci-hcd.4.auto: irq 135, io mem 0x12000000
[ 11.914275] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.914285] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 11.914292] usb usb3: Product: xHCI Host Controller
[ 11.914300] usb usb3: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 11.914307] usb usb3: SerialNumber: xhci-hcd.4.auto
[ 11.915348] hub 3-0:1.0: USB hub found
[ 11.915428] hub 3-0:1.0: 1 port detected
[ 11.916080] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 11.916421] xhci-hcd xhci-hcd.4.auto: new USB bus registered,
assigned bus number 4
[ 11.916597] usb usb4: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 11.916895] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 11.916905] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 11.916912] usb usb4: Product: xHCI Host Controller
[ 11.916920] usb usb4: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 11.916927] usb usb4: SerialNumber: xhci-hcd.4.auto
[ 11.917949] hub 4-0:1.0: USB hub found
[ 11.918009] hub 4-0:1.0: 1 port detected
[ 11.918718] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 11.919075] xhci-hcd xhci-hcd.5.auto: new USB bus registered,
assigned bus number 5
[ 11.919804] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220f04c hci
version 0x100 quirks 0x02010010
[ 11.919871] xhci-hcd xhci-hcd.5.auto: irq 136, io mem 0x12400000
[ 11.920171] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.920180] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 11.920188] usb usb5: Product: xHCI Host Controller
[ 11.920196] usb usb5: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 11.920203] usb usb5: SerialNumber: xhci-hcd.5.auto
[ 11.921206] hub 5-0:1.0: USB hub found
[ 11.921265] hub 5-0:1.0: 1 port detected
[ 11.921788] dwmmc_exynos 12220000.mmc: 1 slots initialized
[ 11.921885] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 11.922520] xhci-hcd xhci-hcd.5.auto: new USB bus registered,
assigned bus number 6
[ 11.922786] usb usb6: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 11.923025] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 11.923036] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 11.923045] usb usb6: Product: xHCI Host Controller
[ 11.923053] usb usb6: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 11.923061] usb usb6: SerialNumber: xhci-hcd.5.auto
[ 11.923413] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.923612] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.923628] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.923765] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.924094] hub 6-0:1.0: USB hub found
[ 11.924165] hub 6-0:1.0: 1 port detected
[ 11.926233] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.926345] alloc_contig_range: [afc58, afc59) PFNs busy
[ 11.926530] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.926547] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.926591] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.595482] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 12.611844] usb 1-1.1: Product: 802.11n WLAN Adapter
[ 12.625723] usb 1-1.1: Manufacturer: Realtek
[ 12.638882] usb 1-1.1: SerialNumber: 00e04c000001
[ 12.656092] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.672205] alloc_contig_range: [afc58, afc59) PFNs busy
[ 12.687118] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.702365] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.716805] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.787384] usb 1-1.3: new full-speed USB device number 4 using
exynos-ehci
[ 12.887531] usb 1-1.3: New USB device found, idVendor=046d,
idProduct=c52b
[ 12.903200] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 12.919313] usb 1-1.3: Product: USB Receiver
[ 12.932324] usb 1-1.3: Manufacturer: Logitech
[ 12.950644] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.966448] alloc_contig_range: [afc58, afc59) PFNs busy
[ 12.981272] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 12.995306] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 13.011218] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 13.025762] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 13.046639] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 13.063227] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 13.065334] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0:
USB HID v1.11 Device [Logitech USB Recei2
[ 13.101296] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 13.116061] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 13.167736] usb 1-1.4: new full-speed USB device number 5 using
exynos-ehci
[ 13.170270] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 13.170475] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 13.170612] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 13.170628] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 13.170719] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 13.197751] input: Logitech K360 as
/devices/platform/soc/12110000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B0
[ 13.199166] logitech-hidpp-device 0003:046D:4004.0004: input,hidraw1:
USB HID v1.11 Keyboard [Logitech K360] o1
[ 13.200741] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 13.200924] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 13.200968] alloc_contig_range: [afc5a, afc5b) PFNs busy
[ 13.201108] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 13.201124] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 13.201170] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 13.490274] usb 1-1.4: New USB device found, idVendor=046d,
idProduct=c52b
[ 13.507101] usb 1-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 13.524278] usb 1-1.4: Product: USB Receiver
[ 13.538351] usb 1-1.4: Manufacturer: Logitech
[ 13.560323] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 13.577349] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 13.593882] alloc_contig_range: [afc5a, afc5b) PFNs busy
[ 13.610367] alloc_contig_range: [afc5b, afc5c) PFNs busy
[ 13.625573] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 13.641852] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 13.659069] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 13.678968] logitech-djreceiver 0003:046D:C52B.0007: hiddev0,hidraw2:
USB HID v1.11 Device [Logitech USB Recei2
[ 13.704487] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 13.722422] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 13.737912] alloc_contig_range: [afc5a, afc5b) PFNs busy
[ 13.753308] alloc_contig_range: [afc5b, afc5c) PFNs busy
[ 13.768597] alloc_contig_range: [afc5c, afc5d) PFNs busy
[ 13.783986] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 13.800295] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 13.815601] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 13.837733] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 13.846474] input: Logitech M325 as
/devices/platform/soc/12110000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B1
[ 13.847490] logitech-hidpp-device 0003:046D:400A.0008: input,hidraw3:
USB HID v1.11 Mouse [Logitech M325] on u1
[ 13.901595] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 13.917406] alloc_contig_range: [afc5a, afc5b) PFNs busy
[ 13.933124] alloc_contig_range: [afc5b, afc5c) PFNs busy
[ 13.948732] alloc_contig_range: [afc5c, afc5d) PFNs busy
[ 13.964162] alloc_contig_range: [afc5d, afc5e) PFNs busy
[ 13.979987] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 13.997207] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 14.012755] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 14.035066] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 14.052180] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 14.067523] alloc_contig_range: [afc5a, afc5b) PFNs busy
[ 14.082780] alloc_contig_range: [afc5b, afc5c) PFNs busy
[ 14.098405] alloc_contig_range: [afc5c, afc5d) PFNs busy
[ 14.113354] alloc_contig_range: [afc5d, afc5e) PFNs busy
[ 14.128067] alloc_contig_range: [afc5e, afc5f) PFNs busy
[ 14.143304] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 14.159084] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 14.173781] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 14.396203] usb usb5-port1: connect-debounce failed
[ 15.903175] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 15.921634] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[ 15.939431] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6
Num_Peri-16 Num_Events-6
[ 15.959640] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 15.978450] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 15.995448] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 16.010923] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 152.970368] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 153.608242] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 154.191331] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 154.773808] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 155.355322] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 155.937490] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 156.520345] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 157.103633] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 157.685173] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 158.267135] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 158.850322] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 159.431478] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 160.014139] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 160.596332] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 161.179182] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 161.762235] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 162.345691] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 162.927735] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 163.510523] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 164.093555] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 164.674547] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 165.257143] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 165.840373] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 166.421992] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 167.005389] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 167.590794] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 168.173320] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 168.756433] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 169.338498] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 169.921241] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 170.504297] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 171.088135] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 171.672174] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 172.253664] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 172.836296] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 173.419509] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 174.001609] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 174.589535] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 175.173325] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 175.756268] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 176.343881] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 176.926345] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 177.509132] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 178.091539] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 178.674475] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 179.256896] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 179.839984] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 180.423088] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 181.005088] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 181.587196] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 182.169277] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 182.752225] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 183.335129] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 183.916280] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 184.499515] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 185.083297] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 185.666287] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 186.248487] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 186.831364] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 187.413370] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 187.996370] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 188.579531] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 189.162281] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 189.744409] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 190.329318] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 190.911722] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 191.492798] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 192.075712] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 192.659186] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 193.242184] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 193.823981] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 194.406775] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 194.989206] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 195.572275] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 196.155157] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 196.736348] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 197.319364] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 197.902553] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 198.485540] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 199.067633] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 199.650800] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 200.236506] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 200.817225] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 201.400159] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 201.981303] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 202.564181] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 203.147494] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 203.730166] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 204.313327] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 204.896153] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 205.478735] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 206.061400] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 206.646319] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 207.228544] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 207.811419] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 208.395535] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 208.978570] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 209.559544] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 210.140322] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 210.722444] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 211.304536] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 211.886595] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 212.469414] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 213.052462] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 213.633682] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 214.216777] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 214.800292] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 215.384280] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 215.967113] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 216.550922] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 217.133977] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 217.716633] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 218.300975] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 218.883977] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 219.468347] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 220.050599] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 220.635857] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 221.217366] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 221.799570] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.381854] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.383971] dracut-initqueue[494]: Warning: Could not boot.
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Started Forward Password Requests to Plymouth Directory Watch.
[ OK ] Reached target Paths.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Reached target System Initialization.
[ OK ] Listening on Open-iSCSI iscsiuio Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
G[ 152.970368] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 153.608242] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 154.191331] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 154.773808] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 155.355322] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 155.937490] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 156.520345] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
U-Boot 2017.05 (Jun 24 2017 - 16:40:39 +0000) for ODROID-XU3
CPU: Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type: xu4
DRAM: 2 GiB
MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
mmc_init: -95, time 11
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:2...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
528 bytes read in 13 ms (39.1 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command: autoboot
Ignoring malformed menu command: hidden
Ignoring unknown command: totaltimeout
Fedora-Mate-armhfp-26-1.5 Boot Options.
1: Fedora-Mate-armhfp-26-1.5 (4.11.8-300.fc26.armv7hl)
Enter choice: 1: Fedora-Mate-armhfp-26-1.5 (4.11.8-300.fc26.armv7hl)
Retrieving file: /initramfs-4.11.8-300.fc26.armv7hl.img
55202128 bytes read in 2514 ms (20.9 MiB/s)
Retrieving file: /vmlinuz-4.11.8-300.fc26.armv7hl
6267616 bytes read in 291 ms (20.5 MiB/s)
append: ro root=UUID=bb8b773e-78ec-478f-807b-267067854356 cma=192MB
cpuidle.off=1
Retrieving file: /dtb-4.11.8-300.fc26.armv7hl/exynos5422-odroidxu4.dtb
54941 bytes read in 126 ms (425.8 KiB/s)
Kernel image @ 0x42000000 [ 0x000000 - 0x5fa2e0 ]
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Ramdisk to 4cb5a000, end 4ffff150 ... OK
Loading Device Tree to 4cb49000, end 4cb5969c ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x100
[ 0.000000] Linux version 4.11.8-300.fc26.armv7hl
(mockbuild(a)buildvm-armv7-13.arm.fedoraproject.org) (gcc vers7
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created DMA memory pool at 0xbe200000,
size 8 MiB
[ 0.000000] OF: reserved mem: initialized node region_mfc_right,
compatible id shared-dma-pool
[ 0.000000] Reserved memory: created DMA memory pool at 0xbbe00000,
size 36 MiB
[ 0.000000] OF: reserved mem: initialized node region_mfc_left,
compatible id shared-dma-pool
[ 0.000000] cma: Reserved 192 MiB at 0xafc00000
[ 0.000000] Samsung CPU ID: 0xe5422001
[ 0.000000] Running under secure firmware.
[ 0.000000] percpu: Embedded 15 pages/cpu @eede0000 s31628 r8192
d21620 u61440
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 505664
[ 0.000000] Kernel command line: ro
root=UUID=bb8b773e-78ec-478f-807b-267067854356 cma=192MB cpuidle.off=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Memory: 1744500K/2029568K available (7440K kernel code,
1301K rwdata, 3528K rodata, 2048K init, 51)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0a4408c (8433 kB)
[ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB)
[ 0.000000] .data : 0xc1000000 - 0xc1145584 (1302 kB)
[ 0.000000] .bss : 0xc1145584 - 0xc11c7160 ( 519 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] GIC physical location is 0x10481000
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps
every 89478484971ns
[ 0.007585] Console: colour dummy device 80x30
[ 0.008704] console [tty0] enabled
[ 0.008766] Calibrating delay loop (skipped), value calculated using
timer frequency.. 48.00 BogoMIPS (lpj=240)
[ 0.008828] pid_max: default: 32768 minimum: 301
[ 0.009320] Security Framework initialized
[ 0.009357] Yama: becoming mindful.
[ 0.009403] SELinux: Initializing.
[ 0.009822] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.009861] Mountpoint-cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.011159] CPU: Testing write buffer coherency: ok
[ 0.011233] ftrace: allocating 31692 entries in 62 pages
[ 0.090865] CPU0: update cpu_capacity 448
[ 0.090914] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.091676] Setting up static identity map for 0x40300000 - 0x40300098
[ 0.092440] ARM CCI driver probed
[ 0.092672] Exynos MCPM support installed
[ 0.101281] EFI services will not be available.
[ 0.102000] smp: Bringing up secondary CPUs ...
[ 0.103095] CPU1: update cpu_capacity 448
[ 0.103103] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.104251] CPU2: update cpu_capacity 448
[ 0.104259] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.105400] CPU3: update cpu_capacity 448
[ 0.105408] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[ 0.106584] CPU4: update cpu_capacity 1535
[ 0.106593] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.107856] CPU5: update cpu_capacity 1535
[ 0.107864] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.109035] CPU6: update cpu_capacity 1535
[ 0.109043] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.110200] CPU7: update cpu_capacity 1535
[ 0.110208] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.110349] smp: Brought up 1 node, 8 CPUs
[ 0.110657] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[ 0.110685] CPU: WARNING: CPU(s) started in wrong/inconsistent modes
(primary CPU mode 0x1a)
[ 0.110723] CPU: This may indicate a broken bootloader or firmware.
[ 0.113454] devtmpfs: initialized
[ 0.136876] VFP support v0.3: implementor 41 architecture 2 part 30
variant 7 rev 3
[ 0.137473] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.137537] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.149375] pinctrl core: initialized pinctrl subsystem
[ 0.153003] NET: Registered protocol family 16
[ 0.155459] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.161493] No ATAGs?
[ 0.161838] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
watchpoint registers.
[ 0.161906] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.163736] Serial: AMBA PL011 UART driver
[ 0.169411] random: fast init done
[ 0.200492] EXYNOS5420 PMU initialized
[ 0.243158] vgaarb: loaded
[ 0.244211] SCSI subsystem initialized
[ 0.244931] usbcore: registered new interface driver usbfs
[ 0.245050] usbcore: registered new interface driver hub
[ 0.245287] usbcore: registered new device driver usb
[ 0.247929] NetLabel: Initializing
[ 0.247967] NetLabel: domain hash size = 128
[ 0.247991] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.248103] NetLabel: unlabeled traffic allowed by default
[ 0.248660] clocksource: Switched to clocksource mct-frc
[ 0.351411] VFS: Disk quotas dquot_6.6.0
[ 0.351568] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.370121] NET: Registered protocol family 2
[ 0.371475] TCP established hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.371613] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.371870] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.372147] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.372220] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.372873] NET: Registered protocol family 1
[ 0.373809] Unpacking initramfs...
[ 4.696760] Freeing initrd memory: 53912K
[ 4.773519] audit: initializing netlink subsys (disabled)
[ 4.773831] audit: type=2000 audit(4.718:1): state=initialized
audit_enabled=0 res=1
[ 4.774223] Initialise system trusted keyrings
[ 4.774476] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 4.782338] zbud: loaded
[ 5.074210] NET: Registered protocol family 38
[ 5.074246] Key type asymmetric registered
[ 5.074270] Asymmetric key parser 'x509' registered
[ 5.074358] bounce: pool size: 64 pages
[ 5.074459] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 250)
[ 5.074760] io scheduler noop registered
[ 5.074783] io scheduler deadline registered
[ 5.075189] io scheduler cfq registered (default)
[ 5.075213] io scheduler mq-deadline registered
[ 5.075851] atomic64_test: passed
[ 5.100117] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 5.109596] Serial: AMBA driver
[ 5.109928] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58,
base_baud = 0) is a S3C6400/10
[ 5.110350] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59,
base_baud = 0) is a S3C6400/10
[ 5.110803] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60,
base_baud = 0) is a S3C6400/10
[ 5.865084] console [ttySAC2] enabled
[ 5.869123] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61,
base_baud = 0) is a S3C6400/10
[ 5.879738] msm_serial: driver initialized
[ 5.882776] STMicroelectronics ASC driver initialized
[ 5.892040] libphy: Fixed MDIO Bus: probed
[ 5.895492] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.901250] ehci-pci: EHCI PCI platform driver
[ 5.905747] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.911807] ohci-pci: OHCI PCI platform driver
[ 5.916285] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.922920] usbcore: registered new interface driver usbserial
[ 5.928397] usbcore: registered new interface driver usbserial_generic
[ 5.934888] usbserial: USB Serial support registered for generic
[ 5.941100] mousedev: PS/2 mouse device common for all mice
[ 5.954259] device-mapper: uevent: version 1.0.3
[ 5.958122] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
initialised: dm-devel(a)redhat.com
[ 5.966597] failed to register cpuidle driver
[ 5.971278] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.976534] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.981802] usbcore: registered new interface driver usbhid
[ 5.987080] usbhid: USB HID core driver
[ 5.993804] drop_monitor: Initializing network drop monitor service
[ 5.998938] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.004108] Initializing XFRM netlink socket
[ 6.009102] NET: Registered protocol family 10
[ 6.029584] Segment Routing with IPv6
[ 6.031888] mip6: Mobile IPv6
[ 6.034762] NET: Registered protocol family 17
[ 6.039879] ThumbEE CPU extension supported.
[ 6.043429] Registering SWP/SWPB emulation handler
[ 6.048195] big.LITTLE switcher initializing
[ 6.052437] CPU0 paired with CPU7
[ 6.055728] CPU1 paired with CPU6
[ 6.059017] CPU2 paired with CPU5
[ 6.062309] CPU3 paired with CPU4
[ 6.065603] GIC ID for CPU 0 cluster 1 is 4
[ 6.069765] GIC ID for CPU 1 cluster 1 is 5
[ 6.073924] GIC ID for CPU 2 cluster 1 is 6
[ 6.078083] GIC ID for CPU 3 cluster 1 is 7
[ 6.082242] GIC ID for CPU 0 cluster 0 is 0
[ 6.087715] NOHZ: local_softirq_pending 02
[ 6.090532] NOHZ: local_softirq_pending 202
[ 6.094899] IRQ54 no longer affine to CPU4
[ 6.098764] GIC ID for CPU 1 cluster 0 is 1
[ 6.107119] IRQ55 no longer affine to CPU5
[ 6.111044] GIC ID for CPU 2 cluster 0 is 2
[ 6.119163] IRQ56 no longer affine to CPU6
[ 6.122846] GIC ID for CPU 3 cluster 0 is 3
[ 6.130992] IRQ57 no longer affine to CPU7
[ 6.135268] big.LITTLE switcher initialized
[ 6.143165] registered taskstats version 1
[ 6.146373] Loading compiled-in X.509 certificates
[ 6.167521] alg: No test for pkcs1pad(rsa,sha256)
(pkcs1pad(rsa-generic,sha256))
[ 6.182580] Loaded X.509 cert 'Fedora kernel signing key:
03162a918d07b67ba6af65b45b2ec58dafb524d8'
[ 6.190397] zswap: loaded using pool lzo/zbud
[ 6.212160] Key type big_key registered
[ 6.231599] Key type encrypted registered
[ 6.269232] hctosys: unable to open rtc device (rtc0)
[ 6.272898] sr_init: No PMIC hook to init smartreflex
[ 6.278792] sr_init: platform driver register failed for SR
[ 6.285575] samsung-uart 12c20000.serial: DMA request failed, DMA
will not be used
[ 6.296961] Freeing unused kernel memory: 2048K
[ 6.300340] rodata_test: test data was not read only
[ 6.343948] systemd[1]: System time before build time, advancing clock.
[ 6.372566] systemd[1]: systemd 233 running in system mode. (+PAM
+AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVI)
[ 6.392143] systemd[1]: Detected architecture arm.
[ 6.396079] systemd[1]: Running in initial RAM disk.
Welcome to Fedora 26 (Twenty Six) dracut-044-183.fc26 (Initramfs)!
[ 6.410884] systemd[1]: No hostname configured.
[ 6.414048] systemd[1]: Set hostname to <localhost>.
[ 6.419081] systemd[1]: Initializing machine ID from random generator.
[ 6.877445] systemd[1]: Reached target Local File Systems.
[ OK ] Reached target Local File Systems.
[ 6.889203] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 6.902897] systemd[1]: Reached target Timers.
[ OK ] Reached target Timers.
[ 6.917747] systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
[ OK ] Listening on Journal Audit Socket.
[ OK ] Listening on Journal Socket.
Starting Journal Service...
Starting Create list of required st��…ce nodes for the current
kernel...
[ OK ] Reached target Swap.
Starting dracut cmdline hook...
Starting Apply Kernel Variables...
[ OK ] Listening on udev Control Socket.
Starting Setup Virtual Console...
[ OK ] Reached target Slices.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Started Create list of required sta��…vice nodes for the
current kernel.
[ 7.072443] audit: type=1130 audit(1498599911.727:2): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
[ OK ] Started Apply Kernel Variables.
[ 7.099050] audit: type=1130 audit(1498599911.754:3): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
[ OK ] Started Setup Virtual Console.
[ 7.125167] audit: type=1130 audit(1498599911.780:4): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
[ 7.144205] audit: type=1131 audit(1498599911.780:5): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
[ OK ] Started Journal Service.
[ 7.172398] audit: type=1130 audit(1498599911.827:6): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
Starting Create Static Device Nodes in /dev...
[ OK ] Started Create Static Device Nodes in /dev.
[ 7.245188] audit: type=1130 audit(1498599911.900:7): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
[ 7.546737] random: crng init done
[ OK ] Started dracut cmdline hook.
[ 8.234003] audit: type=1130 audit(1498599912.889:8): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
Starting dracut pre-udev hook...
Starting Open-iSCSI...
[ 8.316363] Loading iSCSI transport class v2.0-870.
[ OK ] Started Open-iSCSI.
[ 8.330246] audit: type=1130 audit(1498599912.985:9): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel m'
[ 8.457192] RPC: Registered named UNIX socket transport module.
[ 8.461721] RPC: Registered udp transport module.
[ 8.466393] RPC: Registered tcp transport module.
[ 8.471061] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.550444] dracut-pre-udev[342]: rpcbind: /run/rpcbind/rpcbind.lock:
No such file or directory
[ 8.854940] dracut-pre-udev[342]: rpc.idmapd: conf_reinit: open
("(null)", O_RDONLY) failed
[ 8.867293] dracut-pre-udev[342]: rpc.idmapd: conf_reinit: open
("(null)", O_RDONLY) failed
[ OK ] Started dracut pre-udev hook.
[ 9.054008] audit: type=1130 audit(1498599913.709:10): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel '
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
Starting dracut pre-trigger hook...
[ OK ] Started dracut pre-trigger hook.
[ 9.814057] kauditd_printk_skb: 1 callbacks suppressed
[ 9.817827] audit: type=1130 audit(1498599914.469:12): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel '
Starting udev Coldplug all Devices...
Mounting Configuration File System...
[ OK ] Mounted Configuration File System.
[ OK ] Started udev Coldplug all Devices.
[ 10.426334] audit: type=1130 audit(1498599915.081:13): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel '
Starting Show Plymouth Boot Screen...
Starting dracut initqueue hook...
[ OK ] Started Show Plymouth Boot Screen.
[ 10.669761] audit: type=1130 audit(1498599915.318:14): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel '
[ OK ] Started Forward Password[ 10.699401] s5p-secss 10830000.sss:
s5p-sss driver registered
Requests to Plymouth Directory Watch.
[ OK ] Reached target Paths.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Reached target System Initialization.
[ OK ] Listening on Open-iSCSI iscsiuio Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ 10.762529] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply
vbus not found, using dummy regulator
[ 10.762533] ehci-exynos: EHCI EXYNOS driver
[ 10.766956] ohci-exynos: OHCI EXYNOS driver
[ 10.811491] Synopsys Designware Multimedia Card Interface Driver
[ 10.818940] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply
vbus-boost not found, using dummy regulator
[ 10.848564] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus
not found, using dummy regulator
[ 10.864878] exynos-ehci 12110000.usb: EHCI Host Controller
[ 10.871403] exynos-ehci 12110000.usb: new USB bus registered,
assigned bus number 1
[ 10.878217] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 10.890033] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 10.890204] exynos-ehci 12110000.usb: irq 71, io mem 0x12110000
[ 10.896742] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[ 10.897199] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.897209] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.897217] usb usb1: Product: EHCI Host Controller
[ 10.897225] usb usb1: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
ehci_hcd
[ 10.897232] usb usb1: SerialNumber: 12110000.usb
[ 10.898319] hub 1-0:1.0: USB hub found
[ 10.898390] hub 1-0:1.0: 3 ports detected
[ 10.900254] exynos-ohci 12120000.usb: USB Host Controller
[ 10.900705] exynos-ohci 12120000.usb: new USB bus registered,
assigned bus number 2
[ 10.901134] exynos-ohci 12120000.usb: irq 71, io mem 0x12120000
[ 10.957074] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.957085] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.957094] usb usb2: Product: USB Host Controller
[ 10.957101] usb usb2: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
ohci_hcd
[ 10.957108] usb usb2: SerialNumber: 12120000.usb
[ 10.958124] hub 2-0:1.0: USB hub found
[ 10.958183] hub 2-0:1.0: 3 ports detected
[ 11.001700] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.008838] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.021322] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply
vbus not found, using dummy regulator
[ 11.023591] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.030892] alloc_contig_range: [afc41, afc42) PFNs busy
[ 11.031014] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.031030] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.031076] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.062740] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply
vbus-boost not found, using dummy regulator
[ 11.081744] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.088726] alloc_contig_range: [afc41, afc42) PFNs busy
[ 11.105107] alloc_contig_range: [afc45, afc46) PFNs busy
[ 11.109159] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.115512] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.120894] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.121327] s3c-i2c 12c80000.i2c: slave address 0x00
[ 11.121341] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
[ 11.122217] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
[ 11.126174] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 11.159579] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.164290] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[ 11.164301] dma-pl330 121a0000.pdma: DBUFF-32x4bytes
Num_Chans-8 Num_Peri-32 Num_Events-32
[ 11.164467] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 11.164483] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 11.164566] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 74,64
bit host data width,64 deep fifo
[ 11.169840] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517
[ 11.171326] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[ 11.171338] dma-pl330 121b0000.pdma: DBUFF-32x4bytes
Num_Chans-8 Num_Peri-32 Num_Events-32
[ 11.174209] exynos-rot 11c00000.rotator: The exynos rotator is probed
successfully
[ 11.175376] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[ 11.175387] dma-pl330 10800000.mdma: DBUFF-64x8bytes
Num_Chans-8 Num_Peri-1 Num_Events-32
[ 11.175433] exynos-drm-gsc 13e00000.video-scaler: failed to get
system register.
[ 11.176513] exynos-drm-gsc 13e00000.video-scaler: drm gsc registered
successfully.
[ 11.177436] exynos-drm-gsc 13e10000.video-scaler: failed to get
system register.
[ 11.179841] exynos-drm-gsc 13e10000.video-scaler: drm gsc registered
successfully.
[ 11.185790] exynos-drm-ipp exynos-drm-ipp: drm ipp registered
successfully.
[ 11.214737] usb 1-1: new high-speed USB device number 2 using exynos-ehci
[ 11.295241] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.300322] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.305733] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.323932] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 11.329594] alloc_contig_range: [afc47, afc48) PFNs busy
[ 11.334962] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 11.341123] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 11.346542] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 74,64
bit host data width,64 deep fifo
[ 11.358028] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517
[ 11.367188] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.372770] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[ 11.372870] alloc_contig_range: [afc47, afc48) PFNs busy
[ 11.372890] alloc_contig_range: [afc48, afc49) PFNs busy
[ 11.372984] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.372999] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.373048] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.410969] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 11.418090] usb 1-1: Product: USB2.0 Hub
[ 11.421982] usb 1-1: Manufacturer: GenesysLogic
[ 11.432408] hub 1-1:1.0: USB hub found
[ 11.435409] hub 1-1:1.0: 4 ports detected
[ 11.453320] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[ 11.457741] rtc rtc1: invalid alarm value: 1900-1-2 0:0:0
[ 11.465597] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1
[ 11.472950] s5m-rtc s2mps14-rtc: rtc core: registered s5m-rtc as rtc0
[ 11.473753] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 11.484940] alloc_contig_range: [afc47, afc48) PFNs busy
[ 11.490187] alloc_contig_range: [afc48, afc49) PFNs busy
[ 11.495463] alloc_contig_range: [afc49, afc4a) PFNs busy
[ 11.500838] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 11.507144] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 11.512537] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 74,64
bit host data width,64 deep fifo
[ 11.518743] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[ 11.535534] OF: graph: no port node found in /soc/hdmi@14530000
[ 11.538414] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[ 11.551079] vdd_ldo15: Bringing 3300000uV into 3100000-3100000uV
[ 11.552808] [drm] Exynos DRM: using 14450000.mixer device for DMA
mapping operations
[ 11.553253] exynos-drm exynos-drm: bound 14450000.mixer (ops
mixer_component_ops [exynosdrm])
[ 11.553631] exynos-drm exynos-drm: bound 14530000.hdmi (ops
hdmi_component_ops [exynosdrm])
[ 11.554085] exynos-drm exynos-drm: bound exynos-drm-vidi (ops
vidi_component_ops [exynosdrm])
[ 11.554093] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.554097] [drm] No driver support for vblank timestamp query.
G[ 11.610564] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[ 11.685743] Console: switching to colour frame buffer device 240x67
[ 11.732747] usb 1-1.1: new high-speed USB device number 3 using
exynos-ehci
[ 11.763627] exynos-drm exynos-drm: fb0: frame buffer device
[ 11.770763] [drm] Initialized exynos 1.0.0 20110530 for exynos-drm on
minor 0
[ 11.793054] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.811511] usb_phy_generic usb_phy_generic.0.auto:
usb_phy_generic.0.auto supply vcc not found, using dummy rr
[ 11.821616] usb_phy_generic usb_phy_generic.1.auto:
usb_phy_generic.1.auto supply vcc not found, using dummy rr
[ 11.823369] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.823388] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.823438] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.845781] exynos-tmu 10060000.tmu: More trip points than supported
by this TMU.
[ 11.845792] exynos-tmu 10060000.tmu: 2 trip points should be
configured in polling mode.
[ 11.868737] usb_phy_generic usb_phy_generic.2.auto:
usb_phy_generic.2.auto supply vcc not found, using dummy rr
[ 11.879438] usb_phy_generic usb_phy_generic.3.auto:
usb_phy_generic.3.auto supply vcc not found, using dummy rr
[ 11.891929] usb 1-1.1: New USB device found, idVendor=7392,
idProduct=7811
[ 11.893724] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address
mode.
[ 11.894117] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[ 11.894135] dwmmc_exynos 12220000.mmc: Version ID is 250a
[ 11.894173] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 74,64
bit host data width,64 deep fifo
[ 11.910601] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req
400000Hz, actual 396825HZ div = 63)
[ 11.912424] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 11.912896] xhci-hcd xhci-hcd.4.auto: new USB bus registered,
assigned bus number 3
[ 11.913876] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220f04c hci
version 0x100 quirks 0x02010010
[ 11.913951] xhci-hcd xhci-hcd.4.auto: irq 135, io mem 0x12000000
[ 11.914275] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.914285] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 11.914292] usb usb3: Product: xHCI Host Controller
[ 11.914300] usb usb3: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 11.914307] usb usb3: SerialNumber: xhci-hcd.4.auto
[ 11.915348] hub 3-0:1.0: USB hub found
[ 11.915428] hub 3-0:1.0: 1 port detected
[ 11.916080] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 11.916421] xhci-hcd xhci-hcd.4.auto: new USB bus registered,
assigned bus number 4
[ 11.916597] usb usb4: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 11.916895] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 11.916905] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 11.916912] usb usb4: Product: xHCI Host Controller
[ 11.916920] usb usb4: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 11.916927] usb usb4: SerialNumber: xhci-hcd.4.auto
[ 11.917949] hub 4-0:1.0: USB hub found
[ 11.918009] hub 4-0:1.0: 1 port detected
[ 11.918718] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 11.919075] xhci-hcd xhci-hcd.5.auto: new USB bus registered,
assigned bus number 5
[ 11.919804] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220f04c hci
version 0x100 quirks 0x02010010
[ 11.919871] xhci-hcd xhci-hcd.5.auto: irq 136, io mem 0x12400000
[ 11.920171] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.920180] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 11.920188] usb usb5: Product: xHCI Host Controller
[ 11.920196] usb usb5: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 11.920203] usb usb5: SerialNumber: xhci-hcd.5.auto
[ 11.921206] hub 5-0:1.0: USB hub found
[ 11.921265] hub 5-0:1.0: 1 port detected
[ 11.921788] dwmmc_exynos 12220000.mmc: 1 slots initialized
[ 11.921885] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 11.922520] xhci-hcd xhci-hcd.5.auto: new USB bus registered,
assigned bus number 6
[ 11.922786] usb usb6: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 11.923025] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 11.923036] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 11.923045] usb usb6: Product: xHCI Host Controller
[ 11.923053] usb usb6: Manufacturer: Linux 4.11.8-300.fc26.armv7hl
xhci-hcd
[ 11.923061] usb usb6: SerialNumber: xhci-hcd.5.auto
[ 11.923413] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.923612] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.923628] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.923765] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 11.924094] hub 6-0:1.0: USB hub found
[ 11.924165] hub 6-0:1.0: 1 port detected
[ 11.926233] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 11.926345] alloc_contig_range: [afc58, afc59) PFNs busy
[ 11.926530] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 11.926547] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 11.926591] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.595482] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 12.611844] usb 1-1.1: Product: 802.11n WLAN Adapter
[ 12.625723] usb 1-1.1: Manufacturer: Realtek
[ 12.638882] usb 1-1.1: SerialNumber: 00e04c000001
[ 12.656092] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.672205] alloc_contig_range: [afc58, afc59) PFNs busy
[ 12.687118] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 12.702365] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 12.716805] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 12.787384] usb 1-1.3: new full-speed USB device number 4 using
exynos-ehci
[ 12.887531] usb 1-1.3: New USB device found, idVendor=046d,
idProduct=c52b
[ 12.903200] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 12.919313] usb 1-1.3: Product: USB Receiver
[ 12.932324] usb 1-1.3: Manufacturer: Logitech
[ 12.950644] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 12.966448] alloc_contig_range: [afc58, afc59) PFNs busy
[ 12.981272] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 12.995306] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 13.011218] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 13.025762] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 13.046639] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 13.063227] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 13.065334] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0:
USB HID v1.11 Device [Logitech USB Recei2
[ 13.101296] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 13.116061] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 13.167736] usb 1-1.4: new full-speed USB device number 5 using
exynos-ehci
[ 13.170270] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 13.170475] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 13.170612] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 13.170628] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 13.170719] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 13.197751] input: Logitech K360 as
/devices/platform/soc/12110000.usb/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B0
[ 13.199166] logitech-hidpp-device 0003:046D:4004.0004: input,hidraw1:
USB HID v1.11 Keyboard [Logitech K360] o1
[ 13.200741] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 13.200924] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 13.200968] alloc_contig_range: [afc5a, afc5b) PFNs busy
[ 13.201108] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 13.201124] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 13.201170] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 13.490274] usb 1-1.4: New USB device found, idVendor=046d,
idProduct=c52b
[ 13.507101] usb 1-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 13.524278] usb 1-1.4: Product: USB Receiver
[ 13.538351] usb 1-1.4: Manufacturer: Logitech
[ 13.560323] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 13.577349] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 13.593882] alloc_contig_range: [afc5a, afc5b) PFNs busy
[ 13.610367] alloc_contig_range: [afc5b, afc5c) PFNs busy
[ 13.625573] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 13.641852] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 13.659069] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 13.678968] logitech-djreceiver 0003:046D:C52B.0007: hiddev0,hidraw2:
USB HID v1.11 Device [Logitech USB Recei2
[ 13.704487] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 13.722422] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 13.737912] alloc_contig_range: [afc5a, afc5b) PFNs busy
[ 13.753308] alloc_contig_range: [afc5b, afc5c) PFNs busy
[ 13.768597] alloc_contig_range: [afc5c, afc5d) PFNs busy
[ 13.783986] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 13.800295] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 13.815601] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 13.837733] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 13.846474] input: Logitech M325 as
/devices/platform/soc/12110000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B1
[ 13.847490] logitech-hidpp-device 0003:046D:400A.0008: input,hidraw3:
USB HID v1.11 Mouse [Logitech M325] on u1
[ 13.901595] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 13.917406] alloc_contig_range: [afc5a, afc5b) PFNs busy
[ 13.933124] alloc_contig_range: [afc5b, afc5c) PFNs busy
[ 13.948732] alloc_contig_range: [afc5c, afc5d) PFNs busy
[ 13.964162] alloc_contig_range: [afc5d, afc5e) PFNs busy
[ 13.979987] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 13.997207] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 14.012755] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 14.035066] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 14.052180] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 14.067523] alloc_contig_range: [afc5a, afc5b) PFNs busy
[ 14.082780] alloc_contig_range: [afc5b, afc5c) PFNs busy
[ 14.098405] alloc_contig_range: [afc5c, afc5d) PFNs busy
[ 14.113354] alloc_contig_range: [afc5d, afc5e) PFNs busy
[ 14.128067] alloc_contig_range: [afc5e, afc5f) PFNs busy
[ 14.143304] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 14.159084] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 14.173781] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 14.396203] usb usb5-port1: connect-debounce failed
[ 15.903175] alloc_contig_range: [afc59, afc5a) PFNs busy
[ 15.921634] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[ 15.939431] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6
Num_Peri-16 Num_Events-6
[ 15.959640] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address
mode.
[ 15.978450] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[ 15.995448] dwmmc_exynos 12200000.mmc: Version ID is 250a
[ 16.010923] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 73,64
bit host data width,64 deep fifo
[ 152.970368] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 153.608242] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 154.191331] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 154.773808] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 155.355322] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 155.937490] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 156.520345] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 157.103633] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 157.685173] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 158.267135] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 158.850322] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 159.431478] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 160.014139] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 160.596332] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 161.179182] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 161.762235] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 162.345691] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 162.927735] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 163.510523] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 164.093555] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 164.674547] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 165.257143] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 165.840373] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 166.421992] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 167.005389] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 167.590794] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 168.173320] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 168.756433] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 169.338498] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 169.921241] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 170.504297] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 171.088135] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 171.672174] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 172.253664] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 172.836296] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 173.419509] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 174.001609] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 174.589535] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 175.173325] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 175.756268] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 176.343881] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 176.926345] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 177.509132] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 178.091539] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 178.674475] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 179.256896] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 179.839984] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 180.423088] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 181.005088] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 181.587196] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 182.169277] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 182.752225] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 183.335129] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 183.916280] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 184.499515] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 185.083297] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 185.666287] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 186.248487] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 186.831364] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 187.413370] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 187.996370] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 188.579531] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 189.162281] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 189.744409] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 190.329318] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 190.911722] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 191.492798] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 192.075712] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 192.659186] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 193.242184] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 193.823981] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 194.406775] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 194.989206] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 195.572275] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 196.155157] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 196.736348] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 197.319364] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 197.902553] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 198.485540] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 199.067633] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 199.650800] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 200.236506] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 200.817225] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 201.400159] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 201.981303] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 202.564181] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 203.147494] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 203.730166] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 204.313327] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 204.896153] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 205.478735] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 206.061400] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 206.646319] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 207.228544] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 207.811419] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 208.395535] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 208.978570] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 209.559544] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 210.140322] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 210.722444] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 211.304536] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 211.886595] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 212.469414] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 213.052462] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 213.633682] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 214.216777] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 214.800292] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 215.384280] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 215.967113] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 216.550922] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 217.133977] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 217.716633] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 218.300975] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 218.883977] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 219.468347] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 220.050599] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 220.635857] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 221.217366] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 221.799570] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.381854] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.383971] dracut-initqueue[494]: Warning: Could not boot.
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Started Forward Password Requests to Plymouth Directory Watch.
[ OK ] Reached target Paths.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Reached target System Initialization.
[ OK ] Listening on Open-iSCSI iscsiuio Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
G[ 152.970368] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 153.608242] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
.
.
.
[ 221.217366] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 221.799570] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.381854] dracut-initqueue[494]: Warning: dracut-initqueue timeout
- starting timeout scripts
[ 222.383971] dracut-initqueue[494]: Warning: Could not boot.
[ 223.857132] dracut-initqueue[494]: Warning:
/dev/disk/by-uuid/bb8b773e-78ec-478f-807b-267067854356 does not ext
Starting Setup Virtual Console...
[ OK 224.060010] audit: type=1130 audit(1498600128.715:15): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=k'
m] Started Setup Virtual Con[ 224.083236] audit: type=1131
audit(1498600128.715:16): pid=1 uid=0 auid=4294967295'
sole.
Starting Dracut Emergency Shell...
[ 224.199450] audit: type=1131 audit(1498600128.854:17): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel '
Warning: /dev/disk/by-uuid/bb8b773e-78ec-478f-807b-267067854356 does not
exist
Generating "/run/initramfs/rdsosreport.txt"
Entering emergency mode. Exit the shell to continue.
Type "journalctl" to view system logs.
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick
or /boot
after mounting them and attach it to a bug report.
dracut:/# cat /proc/partitions
dracut:/# cat /proc/modules
hid_logitech_hidpp 24576 0 - Live 0xbf494000
hid_logitech_dj 20480 0 - Live 0xbf476000
xhci_plat_hcd 16384 0 - Live 0xbf464000
dwc3 110592 0 - Live 0xbf41c000
ulpi 16384 1 dwc3, Live 0xbf40c000
udc_core 49152 1 dwc3, Live 0xbf3dc000
phy_generic 16384 0 - Live 0xbf3c4000
s2mps11 49152 14 - Live 0xbf3b4000
rtc_s5m 20480 0 - Live 0xbf3aa000
clk_s2mps11 16384 1 - Live 0xbf3a2000
dwc3_exynos 16384 0 - Live 0xbf392000
phy_exynos_dp_video 16384 0 - Live 0xbf38a000
phy_exynos_mipi_video 16384 0 - Live 0xbf382000
pl330 28672 0 - Live 0xbf35e000
clk_exynos_audss 16384 0 - Live 0xbf356000
exynosdrm 167936 1 - Live 0xbf248000
i2c_s3c2410 20480 0 - Live 0xbf23e000
analogix_dp 32768 1 exynosdrm, Live 0xbf231000
pwm_samsung 16384 0 - Live 0xbf229000
i2c_exynos5 16384 0 - Live 0xbf221000
drm_kms_helper 143360 2 exynosdrm,analogix_dp, Live 0xbf1ef000
syscopyarea 16384 1 drm_kms_helper, Live 0xbf1e8000
sysfillrect 16384 1 drm_kms_helper, Live 0xbf1d9000
dw_mmc_exynos 16384 0 - Live 0xbf1d1000
dw_mmc_pltfm 16384 1 dw_mmc_exynos, Live 0xbf1c1000
dw_mmc 36864 2 dw_mmc_exynos,dw_mmc_pltfm, Live 0xbf1a3000
sysimgblt 16384 1 drm_kms_helper, Live 0xbf19c000
fb_sys_fops 16384 1 drm_kms_helper, Live 0xbf167000
mmc_core 135168 2 dw_mmc_exynos,dw_mmc, Live 0xbf139000
phy_exynos_usb2 20480 2 - Live 0xbf12f000
ohci_exynos 16384 0 - Live 0xbf126000
ehci_exynos 16384 0 - Live 0xbf11d000
phy_exynos5_usbdrd 16384 4 - Live 0xbf10d000
drm 327680 4 exynosdrm,analogix_dp,drm_kms_helper, Live 0xbf0a2000
s5p_sss 16384 0 - Live 0xbf099000
rtc_s3c 20480 0 - Live 0xbf08f000
sunrpc 323584 1 - Live 0xbf022000
scsi_transport_iscsi 86016 1 - Live 0xbf000000
dracut:/#
dracut:/#
dracut:/#
dracut:/# lsmod
Module Size Used by
hid_logitech_hidpp 24576 0
hid_logitech_dj 20480 0
xhci_plat_hcd 16384 0
dwc3 110592 0
ulpi 16384 1 dwc3
udc_core 49152 1 dwc3
phy_generic 16384 0
s2mps11 49152 14
rtc_s5m 20480 0
clk_s2mps11 16384 1
dwc3_exynos 16384 0
phy_exynos_dp_video 16384 0
phy_exynos_mipi_video 16384 0
pl330 28672 0
clk_exynos_audss 16384 0
exynosdrm 167936 1
i2c_s3c2410 20480 0
analogix_dp 32768 1 exynosdrm
pwm_samsung 16384 0
i2c_exynos5 16384 0
drm_kms_helper 143360 2 exynosdrm,analogix_dp
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
dw_mmc_exynos 16384 0
dw_mmc_pltfm 16384 1 dw_mmc_exynos
dw_mmc 36864 2 dw_mmc_pltfm,dw_mmc_exynos
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
mmc_core 135168 2 dw_mmc,dw_mmc_exynos
phy_exynos_usb2 20480 2
ohci_exynos 16384 0
ehci_exynos 16384 0
phy_exynos5_usbdrd 16384 4
drm 327680 4 exynosdrm,analogix_dp,drm_kms_helper
s5p_sss 16384 0
rtc_s3c 20480 0
sunrpc 323584 1
scsi_transport_iscsi 86016 1
dracut:/#
dracut:/#
dracut:/#
dracut:/# pwd
/
dracut:/# cat /etc/fstab
cat: /etc/fstab: No such file or directory
dracut:/# ls -l
total 8
lrwxrwxrwx 1 root root 7 Jun 22 13:42 bin -> usr/bin
drwxr-xr-x 13 root root 3900 Jun 27 21:45 dev
-rw-r--r-- 1 root root 507 Jun 27 21:45 dracut-state.sh
drwxr-xr-x 11 root root 0 Jun 27 21:48 etc
lrwxrwxrwx 1 root root 23 Jun 22 13:42 init -> usr/lib/systemd/systemd
lrwxrwxrwx 1 root root 7 Jun 22 13:42 lib -> usr/lib
dr-xr-xr-x 125 root root 0 Jan 1 1970 proc
drwxr-xr-x 2 root root 0 Jun 22 13:42 root
drwxr-xr-x 11 root root 260 Jun 27 21:45 run
lrwxrwxrwx 1 root root 8 Jun 22 13:42 sbin -> usr/sbin
-rwxr-xr-x 1 root root 3113 Jun 22 13:41 shutdown
dr-xr-xr-x 12 root root 0 Jan 1 1970 sys
drwxr-xr-x 2 root root 0 Jun 22 13:42 sysroot
drwxr-xr-x 2 root root 0 Jun 22 13:42 tmp
drwxr-xr-x 6 root root 0 Jun 22 13:42 usr
drwxr-xr-x 4 root root 0 Jun 27 21:45 var
dracut:/#
dracut:/#
dracut:/# cd /etc
dracut:/etc#
dracut:/etc# ls -l
total 748
drwxr-xr-x 2 root root 0 Jun 22 13:42 cmdline.d
drwxr-xr-x 2 root root 0 Jun 22 13:42 conf.d
-rw-r--r-- 1 root root 248 Jun 22 13:42 dhclient.conf
-rw-r--r-- 1 root root 115 Feb 9 14:32 e2fsck.conf
-rw-r--r-- 1 root root 31 Jun 22 13:42 fedora-release
-rw-r--r-- 1 root root 0 Jun 22 13:42 fstab.empty
-rw-r--r-- 1 root root 191 Jun 22 13:42 group
-rw-r--r-- 1 root root 4849 Feb 8 15:02 idmapd.conf
lrwxrwxrwx 1 root root 25 Jun 22 13:42 initrd-release ->
../usr/lib/initrd-release
-rw-r--r-- 1 root root 9491 Jun 22 13:42 ld.so.cache
-rw-r--r-- 1 root root 28 Jun 20 04:35 ld.so.conf
drwxr-xr-x 2 root root 0 Jun 22 13:42 ld.so.conf.d
drwxr-xr-x 2 root root 0 Jun 22 13:42 libnl
drwxr-xr-x 2 root root 0 Jun 22 13:42 lvm
-rw-r--r-- 1 root root 33 Jun 27 21:45 machine-id
drwxr-xr-x 2 root root 0 Jun 22 13:42 modprobe.d
lrwxrwxrwx 1 root root 17 Jun 22 13:42 mtab -> /proc/self/mounts
-rw-r--r-- 1 root root 767 May 17 15:22 netconfig
-rw-r--r-- 1 root root 1763 Jun 22 13:42 nsswitch.conf
lrwxrwxrwx 1 root root 14 Jun 22 13:42 os-release -> initrd-release
-rw-r--r-- 1 root root 219 Jun 22 13:42 passwd
drwxr-xr-x 2 root root 0 Jun 22 13:42 plymouth
-rw-r--r-- 1 root root 23 Jun 27 21:48 profile
-rw-r--r-- 1 root root 6568 Dec 7 2016 protocols
-rw-r--r-- 1 root root 1634 Jun 20 04:27 rpc
-rw-r--r-- 1 root root 687295 Dec 7 2016 services
lrwxrwxrwx 1 root root 14 Jun 22 13:42 system-release -> fedora-release
drwxr-xr-x 2 root root 0 Jun 22 13:42 systemd
drwxr-xr-x 3 root root 0 Jun 22 13:42 udev
-rw-r--r-- 1 root root 1204 Jun 22 13:42 virc
dracut:/etc#
dracut:/etc#
dracut:/etc# cd /dev
dracut:/dev# ls -
ls: cannot access '-': No such file or directory
dracut:/dev# ls -l
total 0
crw------- 1 root root 10, 235 Jun 27 21:45 autofs
crw------- 1 root root 10, 234 Jun 27 21:45 btrfs-control
drwxr-xr-x 3 root root 60 Jun 27 21:45 bus
drwxr-xr-x 2 root root 3880 Jun 27 21:45 char
crw------- 1 root root 5, 1 Jun 27 22:02 console
crw------- 1 root root 10, 62 Jun 27 21:45 cpu_dma_latency
drwxr-xr-x 2 root root 80 Jun 27 21:45 dri
crw-rw---- 1 root video 29, 0 Jun 27 21:45 fb0
lrwxrwxrwx 1 root root 13 Jun 27 21:45 fd -> /proc/self/fd
crw-rw-rw- 1 root root 1, 7 Jun 27 21:45 full
crw-rw-rw- 1 root root 10, 229 Jun 27 21:45 fuse
crw------- 1 root root 254, 0 Jun 27 21:45 gpiochip0
crw------- 1 root root 254, 1 Jun 27 21:45 gpiochip1
crw------- 1 root root 254, 10 Jun 27 21:45 gpiochip10
crw------- 1 root root 254, 11 Jun 27 21:45 gpiochip11
crw------- 1 root root 254, 12 Jun 27 21:45 gpiochip12
crw------- 1 root root 254, 13 Jun 27 21:45 gpiochip13
crw------- 1 root root 254, 14 Jun 27 21:45 gpiochip14
crw------- 1 root root 254, 15 Jun 27 21:45 gpiochip15
crw------- 1 root root 254, 16 Jun 27 21:45 gpiochip16
crw------- 1 root root 254, 17 Jun 27 21:45 gpiochip17
crw------- 1 root root 254, 18 Jun 27 21:45 gpiochip18
crw------- 1 root root 254, 19 Jun 27 21:45 gpiochip19
crw------- 1 root root 254, 2 Jun 27 21:45 gpiochip2
crw------- 1 root root 254, 20 Jun 27 21:45 gpiochip20
crw------- 1 root root 254, 21 Jun 27 21:45 gpiochip21
crw------- 1 root root 254, 22 Jun 27 21:45 gpiochip22
crw------- 1 root root 254, 23 Jun 27 21:45 gpiochip23
crw------- 1 root root 254, 24 Jun 27 21:45 gpiochip24
crw------- 1 root root 254, 25 Jun 27 21:45 gpiochip25
crw------- 1 root root 254, 26 Jun 27 21:45 gpiochip26
crw------- 1 root root 254, 27 Jun 27 21:45 gpiochip27
crw------- 1 root root 254, 28 Jun 27 21:45 gpiochip28
crw------- 1 root root 254, 29 Jun 27 21:45 gpiochip29
crw------- 1 root root 254, 3 Jun 27 21:45 gpiochip3
crw------- 1 root root 254, 30 Jun 27 21:45 gpiochip30
crw------- 1 root root 254, 31 Jun 27 21:45 gpiochip31
crw------- 1 root root 254, 32 Jun 27 21:45 gpiochip32
crw------- 1 root root 254, 33 Jun 27 21:45 gpiochip33
crw------- 1 root root 254, 34 Jun 27 21:45 gpiochip34
crw------- 1 root root 254, 35 Jun 27 21:45 gpiochip35
crw------- 1 root root 254, 4 Jun 27 21:45 gpiochip4
crw------- 1 root root 254, 5 Jun 27 21:45 gpiochip5
crw------- 1 root root 254, 6 Jun 27 21:45 gpiochip6
crw------- 1 root root 254, 7 Jun 27 21:45 gpiochip7
crw------- 1 root root 254, 8 Jun 27 21:45 gpiochip8
crw------- 1 root root 254, 9 Jun 27 21:45 gpiochip9
crw------- 1 root root 242, 0 Jun 27 21:45 hidraw0
crw------- 1 root root 242, 1 Jun 27 21:45 hidraw1
crw------- 1 root root 242, 2 Jun 27 21:45 hidraw2
crw------- 1 root root 242, 3 Jun 27 21:45 hidraw3
crw------- 1 root root 10, 183 Jun 27 21:45 hwrng
drwxr-xr-x 2 root root 120 Jun 27 21:45 input
crw-r--r-- 1 root root 1, 11 Jun 27 21:45 kmsg
lrwxrwxrwx 1 root root 28 Jun 27 21:45 log ->
/run/systemd/journal/dev-log
crw-rw---- 1 root disk 10, 237 Jun 27 21:45 loop-control
drwxr-xr-x 2 root root 60 Jan 1 1970 mapper
crw-r----- 1 root kmem 1, 1 Jun 27 21:45 mem
crw------- 1 root root 10, 59 Jun 27 21:45 memory_bandwidth
drwxr-xr-x 2 root root 60 Jun 27 21:45 net
crw------- 1 root root 10, 61 Jun 27 21:45 network_latency
crw------- 1 root root 10, 60 Jun 27 21:45 network_throughput
crw-rw-rw- 1 root root 1, 3 Jun 27 21:45 null
crw-rw-rw- 1 root tty 5, 2 Jun 27 21:45 ptmx
drwxr-xr-x 2 root root 0 Jun 27 21:45 pts
crw-rw-rw- 1 root root 1, 8 Jun 27 21:45 random
drwxr-xr-x 2 root root 60 Jan 1 1970 raw
lrwxrwxrwx 1 root root 4 Jun 27 21:45 rtc -> rtc0
crw------- 1 root root 252, 0 Jun 27 21:45 rtc0
crw------- 1 root root 252, 1 Jun 27 21:45 rtc1
drwxrwxrwt 2 root root 40 Jun 27 21:45 shm
crw------- 1 root root 10, 231 Jun 27 21:45 snapshot
drwxr-xr-x 2 root root 60 Jun 27 21:45 snd
lrwxrwxrwx 1 root root 15 Jun 27 21:45 stderr -> /proc/self/fd/2
lrwxrwxrwx 1 root root 15 Jun 27 21:45 stdin -> /proc/self/fd/0
lrwxrwxrwx 1 root root 15 Jun 27 21:45 stdout -> /proc/self/fd/1
crw-rw-rw- 1 root tty 5, 0 Jun 27 21:45 tty
crw--w---- 1 root tty 4, 0 Jun 27 21:48 tty0
crw--w---- 1 root tty 4, 1 Jun 27 21:48 tty1
crw--w---- 1 root tty 4, 10 Jun 27 21:45 tty10
crw--w---- 1 root tty 4, 11 Jun 27 21:45 tty11
crw--w---- 1 root tty 4, 12 Jun 27 21:45 tty12
crw--w---- 1 root tty 4, 13 Jun 27 21:45 tty13
crw--w---- 1 root tty 4, 14 Jun 27 21:45 tty14
crw--w---- 1 root tty 4, 15 Jun 27 21:45 tty15
crw--w---- 1 root tty 4, 16 Jun 27 21:45 tty16
crw--w---- 1 root tty 4, 17 Jun 27 21:45 tty17
crw--w---- 1 root tty 4, 18 Jun 27 21:45 tty18
crw--w---- 1 root tty 4, 19 Jun 27 21:45 tty19
crw--w---- 1 root tty 4, 2 Jun 27 21:45 tty2
crw--w---- 1 root tty 4, 20 Jun 27 21:45 tty20
crw--w---- 1 root tty 4, 21 Jun 27 21:45 tty21
crw--w---- 1 root tty 4, 22 Jun 27 21:45 tty22
crw--w---- 1 root tty 4, 23 Jun 27 21:45 tty23
crw--w---- 1 root tty 4, 24 Jun 27 21:45 tty24
crw--w---- 1 root tty 4, 25 Jun 27 21:45 tty25
crw--w---- 1 root tty 4, 26 Jun 27 21:45 tty26
crw--w---- 1 root tty 4, 27 Jun 27 21:45 tty27
crw--w---- 1 root tty 4, 28 Jun 27 21:45 tty28
crw--w---- 1 root tty 4, 29 Jun 27 21:45 tty29
crw--w---- 1 root tty 4, 3 Jun 27 21:45 tty3
crw--w---- 1 root tty 4, 30 Jun 27 21:45 tty30
crw--w---- 1 root tty 4, 31 Jun 27 21:45 tty31
crw--w---- 1 root tty 4, 32 Jun 27 21:45 tty32
crw--w---- 1 root tty 4, 33 Jun 27 21:45 tty33
crw--w---- 1 root tty 4, 34 Jun 27 21:45 tty34
crw--w---- 1 root tty 4, 35 Jun 27 21:45 tty35
crw--w---- 1 root tty 4, 36 Jun 27 21:45 tty36
crw--w---- 1 root tty 4, 37 Jun 27 21:45 tty37
crw--w---- 1 root tty 4, 38 Jun 27 21:45 tty38
crw--w---- 1 root tty 4, 39 Jun 27 21:45 tty39
crw--w---- 1 root tty 4, 4 Jun 27 21:45 tty4
crw--w---- 1 root tty 4, 40 Jun 27 21:45 tty40
crw--w---- 1 root tty 4, 41 Jun 27 21:45 tty41
crw--w---- 1 root tty 4, 42 Jun 27 21:45 tty42
crw--w---- 1 root tty 4, 43 Jun 27 21:45 tty43
crw--w---- 1 root tty 4, 44 Jun 27 21:45 tty44
crw--w---- 1 root tty 4, 45 Jun 27 21:45 tty45
crw--w---- 1 root tty 4, 46 Jun 27 21:45 tty46
crw--w---- 1 root tty 4, 47 Jun 27 21:45 tty47
crw--w---- 1 root tty 4, 48 Jun 27 21:45 tty48
crw--w---- 1 root tty 4, 49 Jun 27 21:45 tty49
crw--w---- 1 root tty 4, 5 Jun 27 21:45 tty5
crw--w---- 1 root tty 4, 50 Jun 27 21:45 tty50
crw--w---- 1 root tty 4, 51 Jun 27 21:45 tty51
crw--w---- 1 root tty 4, 52 Jun 27 21:45 tty52
crw--w---- 1 root tty 4, 53 Jun 27 21:45 tty53
crw--w---- 1 root tty 4, 54 Jun 27 21:45 tty54
crw--w---- 1 root tty 4, 55 Jun 27 21:45 tty55
crw--w---- 1 root tty 4, 56 Jun 27 21:45 tty56
crw--w---- 1 root tty 4, 57 Jun 27 21:45 tty57
crw--w---- 1 root tty 4, 58 Jun 27 21:45 tty58
crw--w---- 1 root tty 4, 59 Jun 27 21:45 tty59
crw--w---- 1 root tty 4, 6 Jun 27 21:45 tty6
crw--w---- 1 root tty 4, 60 Jun 27 21:45 tty60
crw--w---- 1 root tty 4, 61 Jun 27 21:45 tty61
crw--w---- 1 root tty 4, 62 Jun 27 21:45 tty62
crw--w---- 1 root tty 4, 63 Jun 27 21:45 tty63
crw--w---- 1 root tty 4, 7 Jun 27 21:45 tty7
crw--w---- 1 root tty 4, 8 Jun 27 21:45 tty8
crw--w---- 1 root tty 4, 9 Jun 27 21:45 tty9
crw-rw---- 1 root dialout 4, 64 Jun 27 21:45 ttyS0
crw-rw---- 1 root dialout 4, 65 Jun 27 21:45 ttyS1
crw-rw---- 1 root dialout 4, 74 Jun 27 21:45 ttyS10
crw-rw---- 1 root dialout 4, 75 Jun 27 21:45 ttyS11
crw-rw---- 1 root dialout 4, 76 Jun 27 21:45 ttyS12
crw-rw---- 1 root dialout 4, 77 Jun 27 21:45 ttyS13
crw-rw---- 1 root dialout 4, 78 Jun 27 21:45 ttyS14
crw-rw---- 1 root dialout 4, 79 Jun 27 21:45 ttyS15
crw-rw---- 1 root dialout 4, 80 Jun 27 21:45 ttyS16
crw-rw---- 1 root dialout 4, 81 Jun 27 21:45 ttyS17
crw-rw---- 1 root dialout 4, 82 Jun 27 21:45 ttyS18
crw-rw---- 1 root dialout 4, 83 Jun 27 21:45 ttyS19
crw-rw---- 1 root dialout 4, 66 Jun 27 21:45 ttyS2
crw-rw---- 1 root dialout 4, 84 Jun 27 21:45 ttyS20
crw-rw---- 1 root dialout 4, 85 Jun 27 21:45 ttyS21
crw-rw---- 1 root dialout 4, 86 Jun 27 21:45 ttyS22
crw-rw---- 1 root dialout 4, 87 Jun 27 21:45 ttyS23
crw-rw---- 1 root dialout 4, 88 Jun 27 21:45 ttyS24
crw-rw---- 1 root dialout 4, 89 Jun 27 21:45 ttyS25
crw-rw---- 1 root dialout 4, 90 Jun 27 21:45 ttyS26
crw-rw---- 1 root dialout 4, 91 Jun 27 21:45 ttyS27
crw-rw---- 1 root dialout 4, 92 Jun 27 21:45 ttyS28
crw-rw---- 1 root dialout 4, 93 Jun 27 21:45 ttyS29
crw-rw---- 1 root dialout 4, 67 Jun 27 21:45 ttyS3
crw-rw---- 1 root dialout 4, 94 Jun 27 21:45 ttyS30
crw-rw---- 1 root dialout 4, 95 Jun 27 21:45 ttyS31
crw-rw---- 1 root dialout 4, 68 Jun 27 21:45 ttyS4
crw-rw---- 1 root dialout 4, 69 Jun 27 21:45 ttyS5
crw-rw---- 1 root dialout 4, 70 Jun 27 21:45 ttyS6
crw-rw---- 1 root dialout 4, 71 Jun 27 21:45 ttyS7
crw-rw---- 1 root dialout 4, 72 Jun 27 21:45 ttyS8
crw-rw---- 1 root dialout 4, 73 Jun 27 21:45 ttyS9
crw-rw---- 1 root dialout 204, 64 Jun 27 21:45 ttySAC0
crw-rw---- 1 root dialout 204, 65 Jun 27 21:45 ttySAC1
crw-rw---- 1 root dialout 204, 66 Jun 27 21:48 ttySAC2
crw-rw---- 1 root dialout 204, 67 Jun 27 21:45 ttySAC3
crw------- 1 root root 10, 239 Jun 27 21:45 uhid
crw-rw-rw- 1 root root 1, 9 Jun 27 21:45 urandom
drwxr-xr-x 2 root root 80 Jun 27 21:45 usb
crw------- 1 root root 243, 0 Jun 27 21:45 usbmon0
crw------- 1 root root 243, 1 Jun 27 21:45 usbmon1
crw------- 1 root root 243, 2 Jun 27 21:45 usbmon2
crw------- 1 root root 243, 3 Jun 27 21:45 usbmon3
crw------- 1 root root 243, 4 Jun 27 21:45 usbmon4
crw------- 1 root root 243, 5 Jun 27 21:45 usbmon5
crw------- 1 root root 243, 6 Jun 27 21:45 usbmon6
crw-rw---- 1 root tty 7, 0 Jun 27 21:45 vcs
crw-rw---- 1 root tty 7, 1 Jun 27 21:45 vcs1
crw-rw---- 1 root tty 7, 128 Jun 27 21:45 vcsa
crw-rw---- 1 root tty 7, 129 Jun 27 21:45 vcsa1
crw------- 1 root root 10, 63 Jun 27 21:45 vga_arbiter
crw-rw-rw- 1 root root 1, 5 Jun 27 21:45 zero
dracut:/dev#
-----------------------------------------------------------------------------------------------------
On 08/23/2017 12:16 PM, Dennis Gilmore wrote:
El mié, 23-08-2017 a las 11:46 -0700, Stewart Samuels escribió:
> Dennis,
>
> Have you tried building the system on an eMMC card and booting that?
> Just curious.
>
> Thanks,
>
> Stewart
I have not, I do not have a emmc card
Dennis
> On 08/23/2017 10:41 AM, Dennis Gilmore wrote:
>> El mié, 23-08-2017 a las 09:13 -0700, Stewart Samuels escribió:
>>> Hi Dennis,
>>>
>>> I have been doing the same process as you with the exception that
>>> I
>>> change the UUIDs in extlinux.conf and /etc/fstab. The other
>>> thing I
>>> do, because I change update the UUIDs, is create a new
>>> initramfs. I
>>> will try again later without creating a new initramfs to see if I
>>> can
>>> get to where you are. BTW, I also am trying to load the Mate
>>> spin,
>>> not the server release.
>>>
>>> Can you try an experiment for me? Can you try to upgrade your
>>> system
>>> doing a "dnf -y update" command. The reboot to ensure it reboots
>>> with the new kernel? By doing the dnf upgrade, you will force
>>> the
>>> system to use dracut to create a new initramfs image. Let's see
>>> if
>>> this now works. This is essentially where the system began
>>> failing
>>> after f24. We need some confidence that the upgrade process is
>>> not
>>> going to kill our path forward.
>> I plugged in a usb2 ethernet adapter and updated the system and it
>> came
>> back fine, however I had to use a usb2 ethernet adapater in the
>> usb2
>> port as it seems the usb3 port is not working, the ethernet onboard
>> is
>> wired up via usb3. 4.12.5-300.fc26.armv7hl is the new kernel.
>>
>>
>> Dennis
>>
>>> Thanks.
>>>
>>> Stewart
>>>
>>> On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
>>>> El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
>>>>> Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
>>>>> --
>>>>>
>>>>> Hello Dennis,
>>>>>
>>>>> that looks beautiful. You have a running Odroid-XU4 with
>>>>> actual
>>>>> Kernel
>>>>> with Fedora 26 !!
>>>>>
>>>>> How did you manage it? I haven't so much luck with the
>>>>> installation.
>>>>>
>>>>> Thanks
>>>>> Andreas
>>>> I ran
>>>>
>>>> xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb
>>>> bs=4MiB
>>>> cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
>>>> cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
>>>> I grabbed from https://github.com/hardkernel/u-boot/tree/odroid
>>>> xu4-
>>>> v201
>>>> 7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
>>>> tzsw.bin.hardkernel and sd_fusing.sh
>>>> then ran
>>>> sh sd_fusing.sh /dev/sdb
>>>> I used parted to resize partition 4 mounted it and ran
>>>> xfs_growfs
>>>> so it
>>>> filled the sd card
>>>>
>>>> I mounted partition 2 and edited extlinux/extlinux.conf adding
>>>> cpuidle.off=1 to the append line. I did have to edit etc/passwd
>>>> and
>>>> unlock the root account as initial-setup is not running.
>>>>
>>>> of couse /dev/sdb was my sdcard, make sure you have the right
>>>> device
>>>> for yours. It does seem that the nic is not detected however.
>>>>
>>>> Dennis
>>>>
>>>>
>>>> _______________________________________________
>>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.o
>>>> rg
>>>
>>> _______________________________________________
>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>>
>>>
>>> _______________________________________________
>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
4 a.m.
On Fri, Aug 25, 2017 at 12:47 AM, Stewart Samuels <searider74(a)gmail.com> wrote:
All,
I have been working toward getting the Odroid-Xu4 to boot from the eMMC card
but the system continues to fail in the same place no matter what I try. It
dumps me into the dracut shell when it cannot find the root partition. I
suspect one or more modules are not being loaded when booting from the eMMC.
Following is my serial console output along with some output from the dracut
shell. Does anyone have any ideas of what to try next?
Can you access it from linux when you have a fully booted system from a SD card?
PS please trim emails
1:03 p.m.
El jue, 24-08-2017 a las 16:47 -0700, Stewart Samuels escribió:
All,
I have been working toward getting the Odroid-Xu4 to boot from the
eMMC card but the system continues to fail in the same place no
matter what I try. It dumps me into the dracut shell when it cannot
find the root partition. I suspect one or more modules are not being
loaded when booting from the eMMC. Following is my serial console
output along with some output from the dracut shell. Does anyone
have any ideas of what to try next?
you will need to rebuild the initrd pwrseq_emmc driver is missing from
the initrd for it to boot
simplest would be in a odroid-xu4 running from microsd
mount /dev/mmcblk1p4 /mnt/
[ 192.561457] EXT4-fs (mmcblk1p4): mounted filesystem with ordered
data mode. Opts: (null)
[root@localhost ~]# mount /dev/mmcblk1p2 /mnt/boot/
[ 199.515666] EXT4-fs (mmcblk1p2): mounted filesystem with ordered
data mode. Opts: (null)
[root@localhost ~]# mount -o bind /proc/ /mnt/proc/
[root@localhost ~]# mount -o bind /dev /mnt/dev/
[root@localhost ~]# mount -o bind /sys /mnt/sys/
[root@localhost ~]# chroot /mnt/
[root@localhost /]# ls /boot/initramfs-4.11.8-300.fc26.armv7hl.img
/boot/initramfs-4.11.8-300.fc26.armv7hl.img
[root@localhost /]# dracut -f /boot/initramfs-4.11.8-
300.fc26.armv7hl.img 4.11.8-300.fc26.armv7hl --add-drivers=pwrseq_emmc
dracut: No '/dev/log' or 'logger' included for syslog logging
[ 266.023281] dracut[1123] No '/dev/log' or 'logger' included for
syslog logging
[ 266.525885] dracut[1123] Executing: /usr/bin/dracut -f
/boot/initramfs-4.11.8-300.fc26.armv7hl.img 4.11.8-300.fc26.armv7hl --
add-drivers=pwrseq_emmc
[ 268.332160] dracut[1123] dracut module 'busybox' will not be
installed, because command 'busybox' could not be found!
[ 271.270476] dracut[1123] dracut module 'biosdevname' will not be
installed, because command 'biosdevname' could not be found!
[ 272.332576] dracut[1123] dracut module 'busybox' will not be
installed, because command 'busybox' could not be found!
[ 275.163080] dracut[1123] *** Including module: bash ***
[ 275.271157] dracut[1123] *** Including module: systemd ***
[ 277.999389] dracut[1123] *** Including module: systemd-initrd ***
[ 278.258202] dracut[1123] *** Including module: nss-softokn ***
[ 278.391379] dracut[1123] *** Including module: i18n ***
[ 279.961126] dracut[1123] *** Including module: network ***
[ 280.840479] dracut[1123] *** Including module: ifcfg ***
[ 280.944682] dracut[1123] *** Including module: drm ***
[ 281.289211] dracut[1123] *** Including module: plymouth ***
[ 287.496441] dracut[1123] *** Including module: kernel-modules ***
[ 292.246621] dracut[1123] *** Including module: kernel-network-
modules ***
[ 292.708417] dracut[1123] *** Including module: rootfs-block ***
[ 292.848379] dracut[1123] *** Including module: terminfo ***
[ 293.002630] dracut[1123] *** Including module: udev-rules ***
[ 293.119264] dracut[1123] Skipping udev rule: 40-redhat.rules
[ 293.141983] dracut[1123] Skipping udev rule: 50-firmware.rules
[ 293.164948] dracut[1123] Skipping udev rule: 50-udev.rules
[ 295.151142] dracut[1123] Skipping udev rule: 91-permissions.rules
[ 295.175105] dracut[1123] Skipping udev rule: 80-drivers-
modprobe.rules
[ 295.413595] dracut[1123] *** Including module: dracut-systemd ***
[ 296.271524] dracut[1123] *** Including module: usrmount ***
[ 296.333878] dracut[1123] *** Including module: base ***
[ 296.920925] dracut[1123] *** Including module: fs-lib ***
[ 297.128453] dracut[1123] *** Including module: shutdown ***
[ 297.775668] dracut[1123] *** Including modules done ***
[ 297.894924] dracut[1123] *** Installing kernel module dependencies
***
[ 298.210530] dracut[1123] *** Installing kernel module dependencies
done ***
[ 298.345975] dracut[1123] *** Resolving executable dependencies ***
[ 307.763333] dracut[1123] *** Resolving executable dependencies
done***
[ 307.935750] dracut[1123] *** Hardlinking files ***
[ 308.148979] dracut[1123] *** Hardlinking files done ***
[ 308.177952] dracut[1123] *** Stripping files ***
[ 311.695060] dracut[1123] *** Stripping files done ***
[ 311.720850] dracut[1123] *** Generating early-microcode cpio image
***
[ 311.816458] dracut[1123] *** Constructing AuthenticAMD.bin ****
[ 311.986099] dracut[1123] *** Store current command line parameters
***
[ 312.021042] dracut[1123] Stored kernel commandline:
[ 312.045569] dracut[1123] No dracut internal kernel commandline
stored in the initramfs
[ 312.072734] dracut[1123] *** Creating image file '/boot/initramfs-
4.11.8-300.fc26.armv7hl.img' ***
[ 375.498351] dracut[1123] *** Creating initramfs image file
'/boot/initramfs-4.11.8-300.fc26.armv7hl.img' done ***
[root@localhost /]# exit
exit
[root@localhost ~]# reboot
it should then boot. I plugged in the emmc from my pinebook to see if
it worked. u-boot is not loading from it but its otherwise working okay
Dennis
6:22 p.m.
HI Dennis,
I've now got the system booting from the eMMC card.
Thanks again for the tip. I noticed earlier as well that the mmc_block
module was not being loaded. I tried adding the mmc_block and
pwrseq_emmc modules as kernel parameters on the append line of the
extlinux.conf file but that failed. Rebuilding them into the initramfs
image was the key and works but only if one updates the UUID information
for the devices in both extlinux.conf and /etc/fstab.
I am currently in process of performing a "dnf update", to update to the
latest release information.
BTW, any new thoughts on getting the USB 3 Hub to recognize devices?
Kind regards,
Stewart
On 08/28/2017 11:03 AM, Dennis Gilmore wrote:
El jue, 24-08-2017 a las 16:47 -0700, Stewart Samuels escribió:
> All,
>
> I have been working toward getting the Odroid-Xu4 to boot from the
> eMMC card but the system continues to fail in the same place no
> matter what I try. It dumps me into the dracut shell when it cannot
> find the root partition. I suspect one or more modules are not being
> loaded when booting from the eMMC. Following is my serial console
> output along with some output from the dracut shell. Does anyone
> have any ideas of what to try next?
you will need to rebuild the initrd pwrseq_emmc driver is missing from
the initrd for it to boot
simplest would be in a odroid-xu4 running from microsd
mount /dev/mmcblk1p4 /mnt/
[ 192.561457] EXT4-fs (mmcblk1p4): mounted filesystem with ordered
data mode. Opts: (null)
[root@localhost ~]# mount /dev/mmcblk1p2 /mnt/boot/
[ 199.515666] EXT4-fs (mmcblk1p2): mounted filesystem with ordered
data mode. Opts: (null)
[root@localhost ~]# mount -o bind /proc/ /mnt/proc/
[root@localhost ~]# mount -o bind /dev /mnt/dev/
[root@localhost ~]# mount -o bind /sys /mnt/sys/
[root@localhost ~]# chroot /mnt/
[root@localhost /]# ls /boot/initramfs-4.11.8-300.fc26.armv7hl.img
/boot/initramfs-4.11.8-300.fc26.armv7hl.img
[root@localhost /]# dracut -f /boot/initramfs-4.11.8-
300.fc26.armv7hl.img 4.11.8-300.fc26.armv7hl --add-drivers=pwrseq_emmc
dracut: No '/dev/log' or 'logger' included for syslog logging
[ 266.023281] dracut[1123] No '/dev/log' or 'logger' included for
syslog logging
[ 266.525885] dracut[1123] Executing: /usr/bin/dracut -f
/boot/initramfs-4.11.8-300.fc26.armv7hl.img 4.11.8-300.fc26.armv7hl --
add-drivers=pwrseq_emmc
[ 268.332160] dracut[1123] dracut module 'busybox' will not be
installed, because command 'busybox' could not be found!
[ 271.270476] dracut[1123] dracut module 'biosdevname' will not be
installed, because command 'biosdevname' could not be found!
[ 272.332576] dracut[1123] dracut module 'busybox' will not be
installed, because command 'busybox' could not be found!
[ 275.163080] dracut[1123] *** Including module: bash ***
[ 275.271157] dracut[1123] *** Including module: systemd ***
[ 277.999389] dracut[1123] *** Including module: systemd-initrd ***
[ 278.258202] dracut[1123] *** Including module: nss-softokn ***
[ 278.391379] dracut[1123] *** Including module: i18n ***
[ 279.961126] dracut[1123] *** Including module: network ***
[ 280.840479] dracut[1123] *** Including module: ifcfg ***
[ 280.944682] dracut[1123] *** Including module: drm ***
[ 281.289211] dracut[1123] *** Including module: plymouth ***
[ 287.496441] dracut[1123] *** Including module: kernel-modules ***
[ 292.246621] dracut[1123] *** Including module: kernel-network-
modules ***
[ 292.708417] dracut[1123] *** Including module: rootfs-block ***
[ 292.848379] dracut[1123] *** Including module: terminfo ***
[ 293.002630] dracut[1123] *** Including module: udev-rules ***
[ 293.119264] dracut[1123] Skipping udev rule: 40-redhat.rules
[ 293.141983] dracut[1123] Skipping udev rule: 50-firmware.rules
[ 293.164948] dracut[1123] Skipping udev rule: 50-udev.rules
[ 295.151142] dracut[1123] Skipping udev rule: 91-permissions.rules
[ 295.175105] dracut[1123] Skipping udev rule: 80-drivers-
modprobe.rules
[ 295.413595] dracut[1123] *** Including module: dracut-systemd ***
[ 296.271524] dracut[1123] *** Including module: usrmount ***
[ 296.333878] dracut[1123] *** Including module: base ***
[ 296.920925] dracut[1123] *** Including module: fs-lib ***
[ 297.128453] dracut[1123] *** Including module: shutdown ***
[ 297.775668] dracut[1123] *** Including modules done ***
[ 297.894924] dracut[1123] *** Installing kernel module dependencies
***
[ 298.210530] dracut[1123] *** Installing kernel module dependencies
done ***
[ 298.345975] dracut[1123] *** Resolving executable dependencies ***
[ 307.763333] dracut[1123] *** Resolving executable dependencies
done***
[ 307.935750] dracut[1123] *** Hardlinking files ***
[ 308.148979] dracut[1123] *** Hardlinking files done ***
[ 308.177952] dracut[1123] *** Stripping files ***
[ 311.695060] dracut[1123] *** Stripping files done ***
[ 311.720850] dracut[1123] *** Generating early-microcode cpio image
***
[ 311.816458] dracut[1123] *** Constructing AuthenticAMD.bin ****
[ 311.986099] dracut[1123] *** Store current command line parameters
***
[ 312.021042] dracut[1123] Stored kernel commandline:
[ 312.045569] dracut[1123] No dracut internal kernel commandline
stored in the initramfs
[ 312.072734] dracut[1123] *** Creating image file '/boot/initramfs-
4.11.8-300.fc26.armv7hl.img' ***
[ 375.498351] dracut[1123] *** Creating initramfs image file
'/boot/initramfs-4.11.8-300.fc26.armv7hl.img' done ***
[root@localhost /]# exit
exit
[root@localhost ~]# reboot
it should then boot. I plugged in the emmc from my pinebook to see if
it worked. u-boot is not loading from it but its otherwise working okay
Dennis
6:25 p.m.
Best bet for usb3 is likely to file an upstream kernel bug and work with the author. It
will likely need someone to bisect where it failed using the upstream kernels and
processes.
Dennis
On 28 August 2017 6:22:12 pm GMT-05:00, Stewart Samuels <searider74(a)gmail.com>
wrote:
HI Dennis,
I've now got the system booting from the eMMC card.
Thanks again for the tip. I noticed earlier as well that the mmc_block
module was not being loaded. I tried adding the mmc_block and
pwrseq_emmc modules as kernel parameters on the append line of the
extlinux.conf file but that failed. Rebuilding them into the initramfs
image was the key and works but only if one updates the UUID
information
for the devices in both extlinux.conf and /etc/fstab.
I am currently in process of performing a "dnf update", to update to
the
latest release information.
BTW, any new thoughts on getting the USB 3 Hub to recognize devices?
Kind regards,
Stewart
On 08/28/2017 11:03 AM, Dennis Gilmore wrote:
> El jue, 24-08-2017 a las 16:47 -0700, Stewart Samuels escribió:
>> All,
>>
>> I have been working toward getting the Odroid-Xu4 to boot from the
>> eMMC card but the system continues to fail in the same place no
>> matter what I try. It dumps me into the dracut shell when it cannot
>> find the root partition. I suspect one or more modules are not
being
>> loaded when booting from the eMMC. Following is my serial console
>> output along with some output from the dracut shell. Does anyone
>> have any ideas of what to try next?
> you will need to rebuild the initrd pwrseq_emmc driver is missing
from
> the initrd for it to boot
>
> simplest would be in a odroid-xu4 running from microsd
>
> mount /dev/mmcblk1p4 /mnt/
> [ 192.561457] EXT4-fs (mmcblk1p4): mounted filesystem with ordered
> data mode. Opts: (null)
> [root@localhost ~]# mount /dev/mmcblk1p2 /mnt/boot/
> [ 199.515666] EXT4-fs (mmcblk1p2): mounted filesystem with ordered
> data mode. Opts: (null)
> [root@localhost ~]# mount -o bind /proc/ /mnt/proc/
> [root@localhost ~]# mount -o bind /dev /mnt/dev/
> [root@localhost ~]# mount -o bind /sys /mnt/sys/
> [root@localhost ~]# chroot /mnt/
> [root@localhost /]# ls /boot/initramfs-4.11.8-300.fc26.armv7hl.img
> /boot/initramfs-4.11.8-300.fc26.armv7hl.img
> [root@localhost /]# dracut -f /boot/initramfs-4.11.8-
> 300.fc26.armv7hl.img 4.11.8-300.fc26.armv7hl
--add-drivers=pwrseq_emmc
> dracut: No '/dev/log' or 'logger' included for syslog logging
> [ 266.023281] dracut[1123] No '/dev/log' or 'logger' included for
> syslog logging
> [ 266.525885] dracut[1123] Executing: /usr/bin/dracut -f
> /boot/initramfs-4.11.8-300.fc26.armv7hl.img 4.11.8-300.fc26.armv7hl
--
> add-drivers=pwrseq_emmc
> [ 268.332160] dracut[1123] dracut module 'busybox' will not be
> installed, because command 'busybox' could not be found!
> [ 271.270476] dracut[1123] dracut module 'biosdevname' will not be
> installed, because command 'biosdevname' could not be found!
> [ 272.332576] dracut[1123] dracut module 'busybox' will not be
> installed, because command 'busybox' could not be found!
> [ 275.163080] dracut[1123] *** Including module: bash ***
> [ 275.271157] dracut[1123] *** Including module: systemd ***
> [ 277.999389] dracut[1123] *** Including module: systemd-initrd ***
> [ 278.258202] dracut[1123] *** Including module: nss-softokn ***
> [ 278.391379] dracut[1123] *** Including module: i18n ***
> [ 279.961126] dracut[1123] *** Including module: network ***
> [ 280.840479] dracut[1123] *** Including module: ifcfg ***
> [ 280.944682] dracut[1123] *** Including module: drm ***
> [ 281.289211] dracut[1123] *** Including module: plymouth ***
> [ 287.496441] dracut[1123] *** Including module: kernel-modules ***
> [ 292.246621] dracut[1123] *** Including module: kernel-network-
> modules ***
> [ 292.708417] dracut[1123] *** Including module: rootfs-block ***
> [ 292.848379] dracut[1123] *** Including module: terminfo ***
> [ 293.002630] dracut[1123] *** Including module: udev-rules ***
> [ 293.119264] dracut[1123] Skipping udev rule: 40-redhat.rules
> [ 293.141983] dracut[1123] Skipping udev rule: 50-firmware.rules
> [ 293.164948] dracut[1123] Skipping udev rule: 50-udev.rules
> [ 295.151142] dracut[1123] Skipping udev rule: 91-permissions.rules
> [ 295.175105] dracut[1123] Skipping udev rule: 80-drivers-
> modprobe.rules
> [ 295.413595] dracut[1123] *** Including module: dracut-systemd ***
> [ 296.271524] dracut[1123] *** Including module: usrmount ***
> [ 296.333878] dracut[1123] *** Including module: base ***
> [ 296.920925] dracut[1123] *** Including module: fs-lib ***
> [ 297.128453] dracut[1123] *** Including module: shutdown ***
> [ 297.775668] dracut[1123] *** Including modules done ***
> [ 297.894924] dracut[1123] *** Installing kernel module dependencies
> ***
> [ 298.210530] dracut[1123] *** Installing kernel module dependencies
> done ***
> [ 298.345975] dracut[1123] *** Resolving executable dependencies ***
> [ 307.763333] dracut[1123] *** Resolving executable dependencies
> done***
> [ 307.935750] dracut[1123] *** Hardlinking files ***
> [ 308.148979] dracut[1123] *** Hardlinking files done ***
> [ 308.177952] dracut[1123] *** Stripping files ***
> [ 311.695060] dracut[1123] *** Stripping files done ***
> [ 311.720850] dracut[1123] *** Generating early-microcode cpio image
> ***
> [ 311.816458] dracut[1123] *** Constructing AuthenticAMD.bin ****
> [ 311.986099] dracut[1123] *** Store current command line parameters
> ***
> [ 312.021042] dracut[1123] Stored kernel commandline:
> [ 312.045569] dracut[1123] No dracut internal kernel commandline
> stored in the initramfs
> [ 312.072734] dracut[1123] *** Creating image file '/boot/initramfs-
> 4.11.8-300.fc26.armv7hl.img' ***
> [ 375.498351] dracut[1123] *** Creating initramfs image file
> '/boot/initramfs-4.11.8-300.fc26.armv7hl.img' done ***
> [root@localhost /]# exit
> exit
> [root@localhost ~]# reboot
>
> it should then boot. I plugged in the emmc from my pinebook to see if
> it worked. u-boot is not loading from it but its otherwise working
okay
>
> Dennis
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
6:28 p.m.
Ok. Will do. Thanks again!
Stewart
On 08/28/2017 04:25 PM, dennis(a)ausil.us wrote:
Best bet for usb3 is likely to file an upstream kernel bug and work
with the author. It will likely need someone to bisect where it failed
using the upstream kernels and processes.
Dennis
On 28 August 2017 6:22:12 pm GMT-05:00, Stewart Samuels
<searider74(a)gmail.com> wrote:
HI Dennis,
I've now got the system booting from the eMMC card.
Thanks again for the tip. I noticed earlier as well that the mmc_block
module was not being loaded. I tried adding the mmc_block and
pwrseq_emmc modules as kernel parameters on the append line of the
extlinux.conf file but that failed. Rebuilding them into the initramfs
image was the key and works but only if one updates the UUID information
for the devices in both extlinux.conf and /etc/fstab.
I am currently in process of performing a "dnf update", to update to the
latest release information.
BTW, any new thoughts on getting the USB 3 Hub to recognize devices?
Kind regards,
Stewart
On 08/28/2017 11:03 AM, Dennis Gilmore wrote:
El jue, 24-08-2017 a las 16:47 -0700, Stewart Samuels escribió:
All, I have been working toward getting the Odroid-Xu4 to
boot from the eMMC card but the system continues to fail
in the same place no matter what I try. It dumps me into
the dracut shell when it cannot find the root partition. I
suspect one or more modules are not being loaded when
booting from the eMMC. Following is my serial console
output along with some output from the dracut shell. Does
anyone have any ideas of what to try next?
you will need to rebuild the initrd pwrseq_emmc driver is
missing from the initrd for it to boot simplest would be in a
odroid-xu4 running from microsd mount /dev/mmcblk1p4 /mnt/ [
192.561457] EXT4-fs (mmcblk1p4): mounted filesystem with
ordered data mode. Opts: (null) [root@localhost ~]# mount
/dev/mmcblk1p2 /mnt/boot/ [ 199.515666] EXT4-fs (mmcblk1p2):
mounted filesystem with ordered data mode. Opts: (null)
[root@localhost ~]# mount -o bind /proc/ /mnt/proc/
[root@localhost ~]# mount -o bind /dev /mnt/dev/
[root@localhost ~]# mount -o bind /sys /mnt/sys/
[root@localhost ~]# chroot /mnt/ [root@localhost /]# ls
/boot/initramfs-4.11.8-300.fc26.armv7hl.img
/boot/initramfs-4.11.8-300.fc26.armv7hl.img [root@localhost
/]# dracut -f /boot/initramfs-4.11.8- 300.fc26.armv7hl.img
4.11.8-300.fc26.armv7hl --add-drivers=pwrseq_emmc dracut: No
'/dev/log' or 'logger' included for syslog logging [
266.023281] dracut[1123] No '/dev/log' or 'logger' included
for syslog logging [ 266.525885] dracut[1123] Executing:
/usr/bin/dracut -f /boot/initramfs-4.11.8-300.fc26.armv7hl.img
4.11.8-300.fc26.armv7hl -- add-drivers=pwrseq_emmc [
268.332160] dracut[1123] dracut module 'busybox' will not be
installed, because command 'busybox' could not be found! [
271.270476] dracut[1123] dracut module 'biosdevname' will not
be installed, because command 'biosdevname' could not be
found! [ 272.332576] dracut[1123] dracut module 'busybox' will
not be installed, because command 'busybox' could not be
found! [ 275.163080] dracut[1123] *** Including module: bash
*** [ 275.271157] dracut[1123] *** Including module: systemd
*** [ 277.999389] dracut[1123] *** Including module:
systemd-initrd *** [ 278.258202] dracut[1123] *** Including
module: nss-softokn *** [ 278.391379] dracut[1123] ***
Including module: i18n *** [ 279.961126] dracut[1123] ***
Including module: network *** [ 280.840479] dracut[1123] ***
Including module: ifcfg *** [ 280.944682] dracut[1123] ***
Including module: drm *** [ 281.289211] dracut[1123] ***
Including module: plymouth *** [ 287.496441] dracut[1123] ***
Including module: kernel-modules *** [ 292.246621]
dracut[1123] *** Including module: kernel-network- modules ***
[ 292.708417] dracut[1123] *** Including module: rootfs-block
*** [ 292.848379] dracut[1123] *** Including module: terminfo
*** [ 293.002630] dracut[1123] *** Including module:
udev-rules *** [ 293.119264] dracut[1123] Skipping udev rule:
40-redhat.rules [ 293.141983] dracut[1123] Skipping udev rule:
50-firmware.rules [ 293.164948] dracut[1123] Skipping udev
rule: 50-udev.rules [ 295.151142] dracut[1123] Skipping udev
rule: 91-permissions.rules [ 295.175105] dracut[1123] Skipping
udev rule: 80-drivers- modprobe.rules [ 295.413595]
dracut[1123] *** Including module: dracut-systemd *** [
296.271524] dracut[1123] *** Including module: usrmount *** [
296.333878] dracut[1123] *** Including module: base *** [
296.920925] dracut[1123] *** Including module: fs-lib *** [
297.128453] dracut[1123] *** Including module: shutdown *** [
297.775668] dracut[1123] *** Including modules done *** [
297.894924] dracut[1123] *** Installing kernel module
dependencies *** [ 298.210530] dracut[1123] *** Installing
kernel module dependencies done *** [ 298.345975] dracut[1123]
*** Resolving executable dependencies *** [ 307.763333]
dracut[1123] *** Resolving executable dependencies done*** [
307.935750] dracut[1123] *** Hardlinking files *** [
308.148979] dracut[1123] *** Hardlinking files done *** [
308.177952] dracut[1123] *** Stripping files *** [ 311.695060]
dracut[1123] *** Stripping files done *** [ 311.720850]
dracut[1123] *** Generating early-microcode cpio image *** [
311.816458] dracut[1123] *** Constructing AuthenticAMD.bin
**** [ 311.986099] dracut[1123] *** Store current command line
parameters *** [ 312.021042] dracut[1123] Stored kernel
commandline: [ 312.045569] dracut[1123] No dracut internal
kernel commandline stored in the initramfs [ 312.072734]
dracut[1123] *** Creating image file '/boot/initramfs-
4.11.8-300.fc26.armv7hl.img' *** [ 375.498351] dracut[1123]
*** Creating initramfs image file
'/boot/initramfs-4.11.8-300.fc26.armv7hl.img' done ***
[root@localhost /]# exit exit [root@localhost ~]# reboot it
should then boot. I plugged in the emmc from my pinebook to
see if it worked. u-boot is not loading from it but its
otherwise working okay Dennis
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
6:31 p.m.
Okay. Rebooting after the "dnf update" fails at the DW_MMC again. I
will check that the modules are there.
Stewart
On 08/28/2017 04:25 PM, dennis(a)ausil.us wrote:
Best bet for usb3 is likely to file an upstream kernel bug and work
with the author. It will likely need someone to bisect where it failed
using the upstream kernels and processes.
Dennis
On 28 August 2017 6:22:12 pm GMT-05:00, Stewart Samuels
<searider74(a)gmail.com> wrote:
HI Dennis,
I've now got the system booting from the eMMC card.
Thanks again for the tip. I noticed earlier as well that the mmc_block
module was not being loaded. I tried adding the mmc_block and
pwrseq_emmc modules as kernel parameters on the append line of the
extlinux.conf file but that failed. Rebuilding them into the initramfs
image was the key and works but only if one updates the UUID information
for the devices in both extlinux.conf and /etc/fstab.
I am currently in process of performing a "dnf update", to update to the
latest release information.
BTW, any new thoughts on getting the USB 3 Hub to recognize devices?
Kind regards,
Stewart
On 08/28/2017 11:03 AM, Dennis Gilmore wrote:
El jue, 24-08-2017 a las 16:47 -0700, Stewart Samuels escribió:
All, I have been working toward getting the Odroid-Xu4 to
boot from the eMMC card but the system continues to fail
in the same place no matter what I try. It dumps me into
the dracut shell when it cannot find the root partition. I
suspect one or more modules are not being loaded when
booting from the eMMC. Following is my serial console
output along with some output from the dracut shell. Does
anyone have any ideas of what to try next?
you will need to rebuild the initrd pwrseq_emmc driver is
missing from the initrd for it to boot simplest would be in a
odroid-xu4 running from microsd mount /dev/mmcblk1p4 /mnt/ [
192.561457] EXT4-fs (mmcblk1p4): mounted filesystem with
ordered data mode. Opts: (null) [root@localhost ~]# mount
/dev/mmcblk1p2 /mnt/boot/ [ 199.515666] EXT4-fs (mmcblk1p2):
mounted filesystem with ordered data mode. Opts: (null)
[root@localhost ~]# mount -o bind /proc/ /mnt/proc/
[root@localhost ~]# mount -o bind /dev /mnt/dev/
[root@localhost ~]# mount -o bind /sys /mnt/sys/
[root@localhost ~]# chroot /mnt/ [root@localhost /]# ls
/boot/initramfs-4.11.8-300.fc26.armv7hl.img
/boot/initramfs-4.11.8-300.fc26.armv7hl.img [root@localhost
/]# dracut -f /boot/initramfs-4.11.8- 300.fc26.armv7hl.img
4.11.8-300.fc26.armv7hl --add-drivers=pwrseq_emmc dracut: No
'/dev/log' or 'logger' included for syslog logging [
266.023281] dracut[1123] No '/dev/log' or 'logger' included
for syslog logging [ 266.525885] dracut[1123] Executing:
/usr/bin/dracut -f /boot/initramfs-4.11.8-300.fc26.armv7hl.img
4.11.8-300.fc26.armv7hl -- add-drivers=pwrseq_emmc [
268.332160] dracut[1123] dracut module 'busybox' will not be
installed, because command 'busybox' could not be found! [
271.270476] dracut[1123] dracut module 'biosdevname' will not
be installed, because command 'biosdevname' could not be
found! [ 272.332576] dracut[1123] dracut module 'busybox' will
not be installed, because command 'busybox' could not be
found! [ 275.163080] dracut[1123] *** Including module: bash
*** [ 275.271157] dracut[1123] *** Including module: systemd
*** [ 277.999389] dracut[1123] *** Including module:
systemd-initrd *** [ 278.258202] dracut[1123] *** Including
module: nss-softokn *** [ 278.391379] dracut[1123] ***
Including module: i18n *** [ 279.961126] dracut[1123] ***
Including module: network *** [ 280.840479] dracut[1123] ***
Including module: ifcfg *** [ 280.944682] dracut[1123] ***
Including module: drm *** [ 281.289211] dracut[1123] ***
Including module: plymouth *** [ 287.496441] dracut[1123] ***
Including module: kernel-modules *** [ 292.246621]
dracut[1123] *** Including module: kernel-network- modules ***
[ 292.708417] dracut[1123] *** Including module: rootfs-block
*** [ 292.848379] dracut[1123] *** Including module: terminfo
*** [ 293.002630] dracut[1123] *** Including module:
udev-rules *** [ 293.119264] dracut[1123] Skipping udev rule:
40-redhat.rules [ 293.141983] dracut[1123] Skipping udev rule:
50-firmware.rules [ 293.164948] dracut[1123] Skipping udev
rule: 50-udev.rules [ 295.151142] dracut[1123] Skipping udev
rule: 91-permissions.rules [ 295.175105] dracut[1123] Skipping
udev rule: 80-drivers- modprobe.rules [ 295.413595]
dracut[1123] *** Including module: dracut-systemd *** [
296.271524] dracut[1123] *** Including module: usrmount *** [
296.333878] dracut[1123] *** Including module: base *** [
296.920925] dracut[1123] *** Including module: fs-lib *** [
297.128453] dracut[1123] *** Including module: shutdown *** [
297.775668] dracut[1123] *** Including modules done *** [
297.894924] dracut[1123] *** Installing kernel module
dependencies *** [ 298.210530] dracut[1123] *** Installing
kernel module dependencies done *** [ 298.345975] dracut[1123]
*** Resolving executable dependencies *** [ 307.763333]
dracut[1123] *** Resolving executable dependencies done*** [
307.935750] dracut[1123] *** Hardlinking files *** [
308.148979] dracut[1123] *** Hardlinking files done *** [
308.177952] dracut[1123] *** Stripping files *** [ 311.695060]
dracut[1123] *** Stripping files done *** [ 311.720850]
dracut[1123] *** Generating early-microcode cpio image *** [
311.816458] dracut[1123] *** Constructing AuthenticAMD.bin
**** [ 311.986099] dracut[1123] *** Store current command line
parameters *** [ 312.021042] dracut[1123] Stored kernel
commandline: [ 312.045569] dracut[1123] No dracut internal
kernel commandline stored in the initramfs [ 312.072734]
dracut[1123] *** Creating image file '/boot/initramfs-
4.11.8-300.fc26.armv7hl.img' *** [ 375.498351] dracut[1123]
*** Creating initramfs image file
'/boot/initramfs-4.11.8-300.fc26.armv7hl.img' done ***
[root@localhost /]# exit exit [root@localhost ~]# reboot it
should then boot. I plugged in the emmc from my pinebook to
see if it worked. u-boot is not loading from it but its
otherwise working okay Dennis
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
6:49 p.m.
Reinserting the parameters and rebuilding initramfs does indeed work
after performing the "dnf update". Dracut needs to be updated upstream
to include these modules for the Odroid systems, particularly for the
XU3 & XU4 systems. In the mean time, one can do the builds by hand if
they can boot off of their MicroSD card.
Stewart
On 08/28/2017 04:31 PM, Stewart Samuels wrote:
Okay. Rebooting after the "dnf update" fails at the DW_MMC
again. I
will check that the modules are there.
Stewart
On 08/28/2017 04:25 PM, dennis(a)ausil.us wrote:
> Best bet for usb3 is likely to file an upstream kernel bug and work
> with the author. It will likely need someone to bisect where it
> failed using the upstream kernels and processes.
>
>
> Dennis
>
> On 28 August 2017 6:22:12 pm GMT-05:00, Stewart Samuels
> <searider74(a)gmail.com> wrote:
>
> HI Dennis,
>
> I've now got the system booting from the eMMC card.
>
> Thanks again for the tip. I noticed earlier as well that the mmc_block
> module was not being loaded. I tried adding the mmc_block and
> pwrseq_emmc modules as kernel parameters on the append line of the
> extlinux.conf file but that failed. Rebuilding them into the initramfs
> image was the key and works but only if one updates the UUID information
> for the devices in both extlinux.conf and /etc/fstab.
>
> I am currently in process of performing a "dnf update", to update to
the
> latest release information.
>
> BTW, any new thoughts on getting the USB 3 Hub to recognize devices?
>
> Kind regards,
> Stewart
>
>
>
> On 08/28/2017 11:03 AM, Dennis Gilmore wrote:
>
> El jue, 24-08-2017 a las 16:47 -0700, Stewart Samuels escribió:
>
> All, I have been working toward getting the Odroid-Xu4 to
> boot from the eMMC card but the system continues to fail
> in the same place no matter what I try. It dumps me into
> the dracut shell when it cannot find the root partition.
> I suspect one or more modules are not being loaded when
> booting from the eMMC. Following is my serial console
> output along with some output from the dracut shell. Does
> anyone have any ideas of what to try next?
>
> you will need to rebuild the initrd pwrseq_emmc driver is
> missing from the initrd for it to boot simplest would be in a
> odroid-xu4 running from microsd mount /dev/mmcblk1p4 /mnt/ [
> 192.561457] EXT4-fs (mmcblk1p4): mounted filesystem with
> ordered data mode. Opts: (null) [root@localhost ~]# mount
> /dev/mmcblk1p2 /mnt/boot/ [ 199.515666] EXT4-fs (mmcblk1p2):
> mounted filesystem with ordered data mode. Opts: (null)
> [root@localhost ~]# mount -o bind /proc/ /mnt/proc/
> [root@localhost ~]# mount -o bind /dev /mnt/dev/
> [root@localhost ~]# mount -o bind /sys /mnt/sys/
> [root@localhost ~]# chroot /mnt/ [root@localhost /]# ls
> /boot/initramfs-4.11.8-300.fc26.armv7hl.img
> /boot/initramfs-4.11.8-300.fc26.armv7hl.img [root@localhost
> /]# dracut -f /boot/initramfs-4.11.8- 300.fc26.armv7hl.img
> 4.11.8-300.fc26.armv7hl --add-drivers=pwrseq_emmc dracut: No
> '/dev/log' or 'logger' included for syslog logging [
> 266.023281] dracut[1123] No '/dev/log' or 'logger' included
> for syslog logging [ 266.525885] dracut[1123] Executing:
> /usr/bin/dracut -f
> /boot/initramfs-4.11.8-300.fc26.armv7hl.img
> 4.11.8-300.fc26.armv7hl -- add-drivers=pwrseq_emmc [
> 268.332160] dracut[1123] dracut module 'busybox' will not be
> installed, because command 'busybox' could not be found! [
> 271.270476] dracut[1123] dracut module 'biosdevname' will not
> be installed, because command 'biosdevname' could not be
> found! [ 272.332576] dracut[1123] dracut module 'busybox'
> will not be installed, because command 'busybox' could not be
> found! [ 275.163080] dracut[1123] *** Including module: bash
> *** [ 275.271157] dracut[1123] *** Including module: systemd
> *** [ 277.999389] dracut[1123] *** Including module:
> systemd-initrd *** [ 278.258202] dracut[1123] *** Including
> module: nss-softokn *** [ 278.391379] dracut[1123] ***
> Including module: i18n *** [ 279.961126] dracut[1123] ***
> Including module: network *** [ 280.840479] dracut[1123] ***
> Including module: ifcfg *** [ 280.944682] dracut[1123] ***
> Including module: drm *** [ 281.289211] dracut[1123] ***
> Including module: plymouth *** [ 287.496441] dracut[1123] ***
> Including module: kernel-modules *** [ 292.246621]
> dracut[1123] *** Including module: kernel-network- modules
> *** [ 292.708417] dracut[1123] *** Including module:
> rootfs-block *** [ 292.848379] dracut[1123] *** Including
> module: terminfo *** [ 293.002630] dracut[1123] *** Including
> module: udev-rules *** [ 293.119264] dracut[1123] Skipping
> udev rule: 40-redhat.rules [ 293.141983] dracut[1123]
> Skipping udev rule: 50-firmware.rules [ 293.164948]
> dracut[1123] Skipping udev rule: 50-udev.rules [ 295.151142]
> dracut[1123] Skipping udev rule: 91-permissions.rules [
> 295.175105] dracut[1123] Skipping udev rule: 80-drivers-
> modprobe.rules [ 295.413595] dracut[1123] *** Including
> module: dracut-systemd *** [ 296.271524] dracut[1123] ***
> Including module: usrmount *** [ 296.333878] dracut[1123] ***
> Including module: base *** [ 296.920925] dracut[1123] ***
> Including module: fs-lib *** [ 297.128453] dracut[1123] ***
> Including module: shutdown *** [ 297.775668] dracut[1123] ***
> Including modules done *** [ 297.894924] dracut[1123] ***
> Installing kernel module dependencies *** [ 298.210530]
> dracut[1123] *** Installing kernel module dependencies done
> *** [ 298.345975] dracut[1123] *** Resolving executable
> dependencies *** [ 307.763333] dracut[1123] *** Resolving
> executable dependencies done*** [ 307.935750] dracut[1123]
> *** Hardlinking files *** [ 308.148979] dracut[1123] ***
> Hardlinking files done *** [ 308.177952] dracut[1123] ***
> Stripping files *** [ 311.695060] dracut[1123] *** Stripping
> files done *** [ 311.720850] dracut[1123] *** Generating
> early-microcode cpio image *** [ 311.816458] dracut[1123] ***
> Constructing AuthenticAMD.bin **** [ 311.986099] dracut[1123]
> *** Store current command line parameters *** [ 312.021042]
> dracut[1123] Stored kernel commandline: [ 312.045569]
> dracut[1123] No dracut internal kernel commandline stored in
> the initramfs [ 312.072734] dracut[1123] *** Creating image
> file '/boot/initramfs- 4.11.8-300.fc26.armv7hl.img' *** [
> 375.498351] dracut[1123] *** Creating initramfs image file
> '/boot/initramfs-4.11.8-300.fc26.armv7hl.img' done ***
> [root@localhost /]# exit exit [root@localhost ~]# reboot it
> should then boot. I plugged in the emmc from my pinebook to
> see if it worked. u-boot is not loading from it but its
> otherwise working okay Dennis
>
>
>
> --
> Sent from my Android device with K-9 Mail. Please excuse my brevity.
10:33 p.m.
You can drop a snippet into a config file that will make sure it's there. Could you
please file a bug against dracut and CC me on it.
Dennis
On 28 August 2017 7:49:40 pm GMT-04:00, Stewart Samuels <searider74(a)gmail.com>
wrote:
Reinserting the parameters and rebuilding initramfs does indeed work
after performing the "dnf update". Dracut needs to be updated
upstream
to include these modules for the Odroid systems, particularly for the
XU3 & XU4 systems. In the mean time, one can do the builds by hand if
they can boot off of their MicroSD card.
Stewart
On 08/28/2017 04:31 PM, Stewart Samuels wrote:
> Okay. Rebooting after the "dnf update" fails at the DW_MMC again. I
> will check that the modules are there.
>
> Stewart
>
> On 08/28/2017 04:25 PM, dennis(a)ausil.us wrote:
>> Best bet for usb3 is likely to file an upstream kernel bug and work
>> with the author. It will likely need someone to bisect where it
>> failed using the upstream kernels and processes.
>>
>>
>> Dennis
>>
>> On 28 August 2017 6:22:12 pm GMT-05:00, Stewart Samuels
>> <searider74(a)gmail.com> wrote:
>>
>> HI Dennis,
>>
>> I've now got the system booting from the eMMC card.
>>
>> Thanks again for the tip. I noticed earlier as well that the
mmc_block
>> module was not being loaded. I tried adding the mmc_block and
>> pwrseq_emmc modules as kernel parameters on the append line of
the
>> extlinux.conf file but that failed. Rebuilding them into the
initramfs
>> image was the key and works but only if one updates the UUID
information
>> for the devices in both extlinux.conf and /etc/fstab.
>>
>> I am currently in process of performing a "dnf update", to
update to the
>> latest release information.
>>
>> BTW, any new thoughts on getting the USB 3 Hub to recognize
devices?
>>
>> Kind regards,
>> Stewart
>>
>>
>>
>> On 08/28/2017 11:03 AM, Dennis Gilmore wrote:
>>
>> El jue, 24-08-2017 a las 16:47 -0700, Stewart Samuels
escribió:
>>
>> All, I have been working toward getting the Odroid-Xu4
to
>> boot from the eMMC card but the system continues to fail
>> in the same place no matter what I try. It dumps me into
>> the dracut shell when it cannot find the root partition.
>> I suspect one or more modules are not being loaded when
>> booting from the eMMC. Following is my serial console
>> output along with some output from the dracut shell.
Does
>> anyone have any ideas of what to try next?
>>
>> you will need to rebuild the initrd pwrseq_emmc driver is
>> missing from the initrd for it to boot simplest would be in
a
>> odroid-xu4 running from microsd mount /dev/mmcblk1p4 /mnt/ [
>> 192.561457] EXT4-fs (mmcblk1p4): mounted filesystem with
>> ordered data mode. Opts: (null) [root@localhost ~]# mount
>> /dev/mmcblk1p2 /mnt/boot/ [ 199.515666] EXT4-fs (mmcblk1p2):
>> mounted filesystem with ordered data mode. Opts: (null)
>> [root@localhost ~]# mount -o bind /proc/ /mnt/proc/
>> [root@localhost ~]# mount -o bind /dev /mnt/dev/
>> [root@localhost ~]# mount -o bind /sys /mnt/sys/
>> [root@localhost ~]# chroot /mnt/ [root@localhost /]# ls
>> /boot/initramfs-4.11.8-300.fc26.armv7hl.img
>> /boot/initramfs-4.11.8-300.fc26.armv7hl.img [root@localhost
>> /]# dracut -f /boot/initramfs-4.11.8- 300.fc26.armv7hl.img
>> 4.11.8-300.fc26.armv7hl --add-drivers=pwrseq_emmc dracut: No
>> '/dev/log' or 'logger' included for syslog logging [
>> 266.023281] dracut[1123] No '/dev/log' or 'logger'
included
>> for syslog logging [ 266.525885] dracut[1123] Executing:
>> /usr/bin/dracut -f
>> /boot/initramfs-4.11.8-300.fc26.armv7hl.img
>> 4.11.8-300.fc26.armv7hl -- add-drivers=pwrseq_emmc [
>> 268.332160] dracut[1123] dracut module 'busybox' will not be
>> installed, because command 'busybox' could not be found! [
>> 271.270476] dracut[1123] dracut module 'biosdevname' will
not
>> be installed, because command 'biosdevname' could not be
>> found! [ 272.332576] dracut[1123] dracut module 'busybox'
>> will not be installed, because command 'busybox' could not
be
>> found! [ 275.163080] dracut[1123] *** Including module: bash
>> *** [ 275.271157] dracut[1123] *** Including module: systemd
>> *** [ 277.999389] dracut[1123] *** Including module:
>> systemd-initrd *** [ 278.258202] dracut[1123] *** Including
>> module: nss-softokn *** [ 278.391379] dracut[1123] ***
>> Including module: i18n *** [ 279.961126] dracut[1123] ***
>> Including module: network *** [ 280.840479] dracut[1123] ***
>> Including module: ifcfg *** [ 280.944682] dracut[1123] ***
>> Including module: drm *** [ 281.289211] dracut[1123] ***
>> Including module: plymouth *** [ 287.496441] dracut[1123]
***
>> Including module: kernel-modules *** [ 292.246621]
>> dracut[1123] *** Including module: kernel-network- modules
>> *** [ 292.708417] dracut[1123] *** Including module:
>> rootfs-block *** [ 292.848379] dracut[1123] *** Including
>> module: terminfo *** [ 293.002630] dracut[1123] ***
Including
>> module: udev-rules *** [ 293.119264] dracut[1123] Skipping
>> udev rule: 40-redhat.rules [ 293.141983] dracut[1123]
>> Skipping udev rule: 50-firmware.rules [ 293.164948]
>> dracut[1123] Skipping udev rule: 50-udev.rules [ 295.151142]
>> dracut[1123] Skipping udev rule: 91-permissions.rules [
>> 295.175105] dracut[1123] Skipping udev rule: 80-drivers-
>> modprobe.rules [ 295.413595] dracut[1123] *** Including
>> module: dracut-systemd *** [ 296.271524] dracut[1123] ***
>> Including module: usrmount *** [ 296.333878] dracut[1123]
***
>> Including module: base *** [ 296.920925] dracut[1123] ***
>> Including module: fs-lib *** [ 297.128453] dracut[1123] ***
>> Including module: shutdown *** [ 297.775668] dracut[1123]
***
>> Including modules done *** [ 297.894924] dracut[1123] ***
>> Installing kernel module dependencies *** [ 298.210530]
>> dracut[1123] *** Installing kernel module dependencies done
>> *** [ 298.345975] dracut[1123] *** Resolving executable
>> dependencies *** [ 307.763333] dracut[1123] *** Resolving
>> executable dependencies done*** [ 307.935750] dracut[1123]
>> *** Hardlinking files *** [ 308.148979] dracut[1123] ***
>> Hardlinking files done *** [ 308.177952] dracut[1123] ***
>> Stripping files *** [ 311.695060] dracut[1123] *** Stripping
>> files done *** [ 311.720850] dracut[1123] *** Generating
>> early-microcode cpio image *** [ 311.816458] dracut[1123]
***
>> Constructing AuthenticAMD.bin **** [ 311.986099]
dracut[1123]
>> *** Store current command line parameters *** [ 312.021042]
>> dracut[1123] Stored kernel commandline: [ 312.045569]
>> dracut[1123] No dracut internal kernel commandline stored in
>> the initramfs [ 312.072734] dracut[1123] *** Creating image
>> file '/boot/initramfs- 4.11.8-300.fc26.armv7hl.img' *** [
>> 375.498351] dracut[1123] *** Creating initramfs image file
>> '/boot/initramfs-4.11.8-300.fc26.armv7hl.img' done ***
>> [root@localhost /]# exit exit [root@localhost ~]# reboot it
>> should then boot. I plugged in the emmc from my pinebook to
>> see if it worked. u-boot is not loading from it but its
>> otherwise working okay Dennis
>>
>>
>>
>> --
>> Sent from my Android device with K-9 Mail. Please excuse my brevity.
>
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
2:27 a.m.
Am , schrieb dennis(a)ausil.us:
You can drop a snippet into a config file that will make sure
it's
there. Could you please file a bug against dracut and CC me on it.
Dennis
---cut---
Hello Dennis and Stewart,
I've open a bug against dracut:
https://bugzilla.redhat.com/show_bug.cgi?id=1482825
No update since 18.08.2017
Andreas
5:43 p.m.
Hello Andreas,
I've updated the bug report and also provided the process for installing
the eMMC card. Have you successfully installed F26 on your eMMC card?
Stewart
On 08/29/2017 12:27 AM, arm_ml(a)rirasoft.de wrote:
Am , schrieb dennis(a)ausil.us:
> You can drop a snippet into a config file that will make sure it's
> there. Could you please file a bug against dracut and CC me on it.
>
> Dennis
>
---cut---
Hello Dennis and Stewart,
I've open a bug against dracut:
https://bugzilla.redhat.com/show_bug.cgi?id=1482825
No update since 18.08.2017
Andreas
1:54 a.m.
Am , schrieb Stewart Samuels:
Hello Andreas,
I've updated the bug report and also provided the process for
installing the eMMC card. Have you successfully installed F26 on your
eMMC card?
Stewart
On 08/29/2017 12:27 AM, arm_ml(a)rirasoft.de wrote:
> Am , schrieb dennis(a)ausil.us:
>> You can drop a snippet into a config file that will make sure it's
>> there. Could you please file a bug against dracut and CC me on it.
>>
>> Dennis
>>
> ---cut---
>
> Hello Dennis and Stewart,
>
> I've open a bug against dracut:
> https://bugzilla.redhat.com/show_bug.cgi?id=1482825
>
> No update since 18.08.2017
>
> Andreas
_______________________________________________
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
Hello Stewart,
Odroid 1 with Cloudshell (Version 1)
yes, I've a running system with Fedora 26 and kernel
4.6.5-300.fc24.armv7hl on emmc . All the newer kernel are not working.
Odroid 2 Cloudshell (Version 2)
kernel 4.6.5-300.fc24.armv7hl on SD-Card is working with the onboard
RAID and USB3
Now I'm changing the 2 3,5" HD with 2" SSD and try to get the newer
kernel work with a rebuild initramfs.
Greetings
Andreas
4:43 p.m.
HI Dennis
Examining your process stated below, did you really append the
u-boot.dtb to the u-boot.bin file in the u-boot-dtb.bin file? Why did
you concatenate them? That seems out of the norm. Why not just flash
the u-boot.bin file provided by Fedora?
Regards,
Stewart
On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
> Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
> --
> Hello Dennis,
>
> that looks beautiful. You have a running Odroid-XU4 with actual
> Kernel
> with Fedora 26 !!
>
> How did you manage it? I haven't so much luck with the installation.
>
> Thanks
> Andreas
I ran
xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB
cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
I grabbed from https://github.com/hardkernel/u-boot/tree/odroidxu4-v201
7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
tzsw.bin.hardkernel and sd_fusing.sh
then ran
sh sd_fusing.sh /dev/sdb
I used parted to resize partition 4 mounted it and ran xfs_growfs so it
filled the sd card
I mounted partition 2 and edited extlinux/extlinux.conf adding
cpuidle.off=1 to the append line. I did have to edit etc/passwd and
unlock the root account as initial-setup is not running.
of couse /dev/sdb was my sdcard, make sure you have the right device
for yours. It does seem that the nic is not detected however.
Dennis
_______________________________________________
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
6:39 p.m.
El mié, 23-08-2017 a las 14:43 -0700, Stewart Samuels escribió:
HI Dennis
Examining your process stated below, did you really append the u-
boot.dtb to the u-boot.bin file in the u-boot-dtb.bin file? Why did
you concatenate them? That seems out of the norm. Why not just
flash the u-boot.bin file provided by Fedora?
Regards,
Stewart
I did concatnate them. From experience u-boot will load the dtb from
the end of the u-boot binary. and u-boot needs the dtb in modern u-
boots to define the hardware. u-boot build process for some boards does
the concatnation, not sure if the xu3 u-boot makes a u-boot-dtb.bin
file and we do not ship it, or its just not making it.
Dennis
>
> On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
> > El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
> > > Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
> > > --
> > >
> > > Hello Dennis,
> > >
> > > that looks beautiful. You have a running Odroid-XU4 with actual
> > > Kernel
> > > with Fedora 26 !!
> > >
> > > How did you manage it? I haven't so much luck with the
> > > installation.
> > >
> > > Thanks
> > > Andreas
> >
> > I ran
> >
> > xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB
> > cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
> > cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
> > I grabbed from https://github.com/hardkernel/u-boot/tree/odroidxu4-
> > v201
> > 7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
> > tzsw.bin.hardkernel and sd_fusing.sh
> > then ran
> > sh sd_fusing.sh /dev/sdb
> > I used parted to resize partition 4 mounted it and ran xfs_growfs
> > so it
> > filled the sd card
> >
> > I mounted partition 2 and edited extlinux/extlinux.conf adding
> > cpuidle.off=1 to the append line. I did have to edit etc/passwd and
> > unlock the root account as initial-setup is not running.
> >
> > of couse /dev/sdb was my sdcard, make sure you have the right
> > device
> > for yours. It does seem that the nic is not detected however.
> >
> > Dennis
> >
> >
> > _______________________________________________
> > arm mailing list -- arm(a)lists.fedoraproject.org
> > To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
7:34 p.m.
Okay. I can confirm I can now boot the USB device to completion. I was
also successfully able to upgrade the system using the "dnf -y update"
command and reboot successfully using the newer kernel. The key was NOT
to create a new initramfs image after changing the UUIDs for the root
partition. As well, the cpuidle.off=1 kernel boot parameter was
required in the extlinux.conf file.
I did NOT concatenate the u-boot.bin and u-boot.dtb files. I just
flashed the u-boot.bin with the other files from Hardkernel that Dennis
specifies below.
There are two problems I see right off the bat. First, as Dennis
mentions, the USB3 ports do not work. Second, only 4 of the 8 cpus seem
to be working based on a top command. Even so, the system actually
seems pretty responsive and usable.
I will now attempt to get the system installed on the eMMC card. I will
report on that progress later.
Stewart
On 08/23/2017 04:39 PM, Dennis Gilmore wrote:
El mié, 23-08-2017 a las 14:43 -0700, Stewart Samuels escribió:
> HI Dennis
>
> Examining your process stated below, did you really append the u-
> boot.dtb to the u-boot.bin file in the u-boot-dtb.bin file? Why did
> you concatenate them? That seems out of the norm. Why not just
> flash the u-boot.bin file provided by Fedora?
>
> Regards,
> Stewart
I did concatnate them. From experience u-boot will load the dtb from
the end of the u-boot binary. and u-boot needs the dtb in modern u-
boots to define the hardware. u-boot build process for some boards does
the concatnation, not sure if the xu3 u-boot makes a u-boot-dtb.bin
file and we do not ship it, or its just not making it.
Dennis
> On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
>> El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
>>> Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
>>> --
>>>
>>> Hello Dennis,
>>>
>>> that looks beautiful. You have a running Odroid-XU4 with actual
>>> Kernel
>>> with Fedora 26 !!
>>>
>>> How did you manage it? I haven't so much luck with the
>>> installation.
>>>
>>> Thanks
>>> Andreas
>> I ran
>>
>> xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB
>> cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
>> cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
>> I grabbed from https://github.com/hardkernel/u-boot/tree/odroidxu4-
>> v201
>> 7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
>> tzsw.bin.hardkernel and sd_fusing.sh
>> then ran
>> sh sd_fusing.sh /dev/sdb
>> I used parted to resize partition 4 mounted it and ran xfs_growfs
>> so it
>> filled the sd card
>>
>> I mounted partition 2 and edited extlinux/extlinux.conf adding
>> cpuidle.off=1 to the append line. I did have to edit etc/passwd and
>> unlock the root account as initial-setup is not running.
>>
>> of couse /dev/sdb was my sdcard, make sure you have the right
>> device
>> for yours. It does seem that the nic is not detected however.
>>
>> Dennis
>>
>>
>> _______________________________________________
>> arm mailing list -- arm(a)lists.fedoraproject.org
>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
_______________________________________________
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
4:22 a.m.
On Thu, Aug 24, 2017 at 1:34 AM, Stewart Samuels <searider74(a)gmail.com> wrote:
Okay. I can confirm I can now boot the USB device to completion. I
was
also successfully able to upgrade the system using the "dnf -y update"
command and reboot successfully using the newer kernel. The key was NOT to
create a new initramfs image after changing the UUIDs for the root
partition. As well, the cpuidle.off=1 kernel boot parameter was required in
the extlinux.conf file.
I did NOT concatenate the u-boot.bin and u-boot.dtb files. I just flashed
the u-boot.bin with the other files from Hardkernel that Dennis specifies
below.
There are two problems I see right off the bat. First, as Dennis mentions,
the USB3 ports do not work. Second, only 4 of the 8 cpus seem to be working
based on a top command. Even so, the system actually seems pretty
responsive and usable.
What does lscpu show? I suspect being a big.little platform you'll
find that all the CPUs work but it might only run one cluster at a
time, or only power up the second cluster under load. I'm not sure
what the algorithms the cpu frequency drivers use for the exynos
platforms, I suspect it depends on other factors as well such as
thermal temp (the tmon util in kernel-tools might give you insight
there).
> I will now attempt to get the system installed on the eMMC card. I will
> report on that progress later.
>
> Stewart
>
>
> On 08/23/2017 04:39 PM, Dennis Gilmore wrote:
>>
>> El mié, 23-08-2017 a las 14:43 -0700, Stewart Samuels escribió:
>>>
>>> HI Dennis
>>>
>>> Examining your process stated below, did you really append the u-
>>> boot.dtb to the u-boot.bin file in the u-boot-dtb.bin file? Why did
>>> you concatenate them? That seems out of the norm. Why not just
>>> flash the u-boot.bin file provided by Fedora?
>>>
>>> Regards,
>>> Stewart
>>
>> I did concatnate them. From experience u-boot will load the dtb from
>> the end of the u-boot binary. and u-boot needs the dtb in modern u-
>> boots to define the hardware. u-boot build process for some boards does
>> the concatnation, not sure if the xu3 u-boot makes a u-boot-dtb.bin
>> file and we do not ship it, or its just not making it.
>>
>> Dennis
>>>
>>> On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
>>>>
>>>> El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
>>>>>
>>>>> Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
>>>>> --
>>>>>
>>>>> Hello Dennis,
>>>>>
>>>>> that looks beautiful. You have a running Odroid-XU4 with actual
>>>>> Kernel
>>>>> with Fedora 26 !!
>>>>>
>>>>> How did you manage it? I haven't so much luck with the
>>>>> installation.
>>>>>
>>>>> Thanks
>>>>> Andreas
>>>>
>>>> I ran
>>>>
>>>> xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB
>>>> cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
>>>> cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
>>>> I grabbed from https://github.com/hardkernel/u-boot/tree/odroidxu4-
>>>> v201
>>>> 7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
>>>> tzsw.bin.hardkernel and sd_fusing.sh
>>>> then ran
>>>> sh sd_fusing.sh /dev/sdb
>>>> I used parted to resize partition 4 mounted it and ran xfs_growfs
>>>> so it
>>>> filled the sd card
>>>>
>>>> I mounted partition 2 and edited extlinux/extlinux.conf adding
>>>> cpuidle.off=1 to the append line. I did have to edit etc/passwd and
>>>> unlock the root account as initial-setup is not running.
>>>>
>>>> of couse /dev/sdb was my sdcard, make sure you have the right
>>>> device
>>>> for yours. It does seem that the nic is not detected however.
>>>>
>>>> Dennis
>>>>
>>>>
>>>> _______________________________________________
>>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>>
>>> _______________________________________________
>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>
>> _______________________________________________
>> arm mailing list -- arm(a)lists.fedoraproject.org
>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
5:09 a.m.
Am , schrieb Peter Robinson:
On Thu, Aug 24, 2017 at 1:34 AM, Stewart Samuels
<searider74(a)gmail.com>
wrote:
> Okay. I can confirm I can now boot the USB device to completion. I
> was
> also successfully able to upgrade the system using the "dnf -y update"
> command and reboot successfully using the newer kernel. The key was
> NOT to
> create a new initramfs image after changing the UUIDs for the root
> partition. As well, the cpuidle.off=1 kernel boot parameter was
> required in
> the extlinux.conf file.
>
> I did NOT concatenate the u-boot.bin and u-boot.dtb files. I just
> flashed
> the u-boot.bin with the other files from Hardkernel that Dennis
> specifies
> below.
>
> There are two problems I see right off the bat. First, as Dennis
> mentions,
> the USB3 ports do not work. Second, only 4 of the 8 cpus seem to be
> working
> based on a top command. Even so, the system actually seems pretty
> responsive and usable.
What does lscpu show? I suspect being a big.little platform you'll
find that all the CPUs work but it might only run one cluster at a
time, or only power up the second cluster under load. I'm not sure
what the algorithms the cpu frequency drivers use for the exynos
platforms, I suspect it depends on other factors as well such as
thermal temp (the tmon util in kernel-tools might give you insight
there).
> I will now attempt to get the system installed on the eMMC card. I
> will
> report on that progress later.
>
---cut---
I also have a running F26, thanks to Dennis for his tips.
@ Peter
[root@localhost ~]# lscpu
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-3
Off-line CPU(s) list: 4-7
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Model: 3
Model name: ARMv7 Processor rev 3 (v7l)
BogoMIPS: 48.00
Flags: half thumb fastmult vfp edsp thumbee neon vfpv3
tls vfpv4 idiva idivt vfpd32 lpae
[root@localhost ~]#
I've compared this system with a running F24 system and load the same
kernel modules via "modprobe".
Fedora 26
[root@localhost ~]# lsusb
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root@localhost ~]#
Fedora 24
[root@myodroid ~]# lsusb
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 003: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153
Gigabit Ethernet Adapter
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 05e3:0735 Genesys Logic, Inc.
Bus 004 Device 002: ID 05e3:0616 Genesys Logic, Inc. hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root@myodroid ~]#
The module "r8152" was manual loaded, but no Ethernet Adapter was found.
Greetings
Andreas
5:30 a.m.
> What does lscpu show? I suspect being a big.little platform
you'll
> find that all the CPUs work but it might only run one cluster at a
> time, or only power up the second cluster under load. I'm not sure
> what the algorithms the cpu frequency drivers use for the exynos
> platforms, I suspect it depends on other factors as well such as
> thermal temp (the tmon util in kernel-tools might give you insight
> there).
>
>> I will now attempt to get the system installed on the eMMC card. I will
>> report on that progress later.
>>
---cut---
I also have a running F26, thanks to Dennis for his tips.
@ Peter
[root@localhost ~]# lscpu
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-3
Off-line CPU(s) list: 4-7
So all the CPUs are there and it's running as big.little, that seems
fine to me, if you load it up does it flip from the A7 processors to
the A15 or does it bring all 8 online?
I've compared this system with a running F24 system and load the
same kernel
modules via "modprobe".
Fedora 26
[root@localhost ~]# lsusb
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
So those two are the ones of interest, it is finding the USB3
controllers, I suspect you'll see the modules too (dwc3 or xhci
modules)
Fedora 24
The kernel version is more useful than the release.
[root@myodroid ~]# lsusb
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 003: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit
Ethernet Adapter
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 05e3:0735 Genesys Logic, Inc.
Bus 004 Device 002: ID 05e3:0616 Genesys Logic, Inc. hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root@myodroid ~]#
The module "r8152" was manual loaded, but no Ethernet Adapter was found.
From what Dennis sent me from dmesg I see errors around LPM (Link
Power Management) and a quick google tells me it's not an unusual
problem [1] with USB-3 controllers.
The dwc3 driver has seen a lot of development to add things like usb
3.1/3.2 support, USB-C and various power related stuff (being the PSU
for a lot of devices now too) so TBH I'm not surprised there's
regression here, the question here is what regressed it. You'd need to
do a git bisect to work that out or in the very least a Fedora kernel
4.11.3-300 worked 4.11.4-300 it stopped because the difference between
what ever F-24 kernel you have and what ever F-26 kernel is likely
vast.
If you're running the 4.11.8 kernel in F-26 have you at least tried
the latest 4.12.8 F-26 kernel to see if that's the same/better/worse
or a 4.13 rc6 F-27 kernel?
Peter
[1]
https://askubuntu.com/questions/879975/usb-3-controller-doesnt-recognize-...
6:40 a.m.
Am , schrieb Peter Robinson:
>> What does lscpu show? I suspect being a big.little platform
you'll
>> find that all the CPUs work but it might only run one cluster at a
>> time, or only power up the second cluster under load. I'm not sure
>> what the algorithms the cpu frequency drivers use for the exynos
>> platforms, I suspect it depends on other factors as well such as
>> thermal temp (the tmon util in kernel-tools might give you insight
>> there).
>>
>>> I will now attempt to get the system installed on the eMMC card. I
>>> will
>>> report on that progress later.
>>>
> ---cut---
>
> I also have a running F26, thanks to Dennis for his tips.
>
> @ Peter
> [root@localhost ~]# lscpu
> Architecture: armv7l
> Byte Order: Little Endian
> CPU(s): 8
> On-line CPU(s) list: 0-3
> Off-line CPU(s) list: 4-7
So all the CPUs are there and it's running as big.little, that seems
fine to me, if you load it up does it flip from the A7 processors to
the A15 or does it bring all 8 online?
> I've compared this system with a running F24 system and load the same
> kernel
> modules via "modprobe".
> Fedora 26
> [root@localhost ~]# lsusb
> Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
So those two are the ones of interest, it is finding the USB3
controllers, I suspect you'll see the modules too (dwc3 or xhci
modules)
> Fedora 24
The kernel version is more useful than the release.
> [root@myodroid ~]# lsusb
> Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 005 Device 003: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153
> Gigabit
> Ethernet Adapter
> Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 003: ID 05e3:0735 Genesys Logic, Inc.
> Bus 004 Device 002: ID 05e3:0616 Genesys Logic, Inc. hub
> Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 003 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> [root@myodroid ~]#
>
> The module "r8152" was manual loaded, but no Ethernet Adapter was
> found.
From what Dennis sent me from dmesg I see errors around LPM (Link
Power Management) and a quick google tells me it's not an unusual
problem [1] with USB-3 controllers.
The dwc3 driver has seen a lot of development to add things like usb
3.1/3.2 support, USB-C and various power related stuff (being the PSU
for a lot of devices now too) so TBH I'm not surprised there's
regression here, the question here is what regressed it. You'd need to
do a git bisect to work that out or in the very least a Fedora kernel
4.11.3-300 worked 4.11.4-300 it stopped because the difference between
what ever F-24 kernel you have and what ever F-26 kernel is likely
vast.
If you're running the 4.11.8 kernel in F-26 have you at least tried
the latest 4.12.8 F-26 kernel to see if that's the same/better/worse
or a 4.13 rc6 F-27 kernel?
Peter
[1]
https://askubuntu.com/questions/879975/usb-3-controller-doesnt-recognize-...
_______________________________________________
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
The Fedora 24 system is running with 4.6.5-300.fc24.armv7hl
I've installed follow kernel:
4.11.8-300.fc26
4.12.5-300.fc26
and from Rawhide
4.13.0-0.rc5.git4.1.fc28
All this kernel have the same problem. If it helps, I've attached dmesg
and lsmod with this kernel version.
Andreas
7:22 a.m.
The Fedora 24 system is running with 4.6.5-300.fc24.armv7hl
I've installed follow kernel:
4.11.8-300.fc26
4.12.5-300.fc26
and from Rawhide
4.13.0-0.rc5.git4.1.fc28
All this kernel have the same problem. If it helps, I've attached dmesg and
lsmod with this kernel version.
It would be useful to know where between 4.6.5 and 4.11.8 it stopped working
12:52 p.m.
Using the same process as described by Dennis below (and what works for
the microSD card boot process, seems to fail to boot using the eMMC
card. The system dumps you into the dracut shell looking for the root
partition. Even though the root partition UUID in
/boot/extlinux/extlinux.conf matches that in /etc/fstab, the initramfs
boot process fails to find it.
Anyone have any ideas?
Stewart
On 08/24/2017 02:22 AM, Peter Robinson wrote:
On Thu, Aug 24, 2017 at 1:34 AM, Stewart Samuels
<searider74(a)gmail.com> wrote:
> Okay. I can confirm I can now boot the USB device to completion. I was
> also successfully able to upgrade the system using the "dnf -y update"
> command and reboot successfully using the newer kernel. The key was NOT to
> create a new initramfs image after changing the UUIDs for the root
> partition. As well, the cpuidle.off=1 kernel boot parameter was required in
> the extlinux.conf file.
>
> I did NOT concatenate the u-boot.bin and u-boot.dtb files. I just flashed
> the u-boot.bin with the other files from Hardkernel that Dennis specifies
> below.
>
> There are two problems I see right off the bat. First, as Dennis mentions,
> the USB3 ports do not work. Second, only 4 of the 8 cpus seem to be working
> based on a top command. Even so, the system actually seems pretty
> responsive and usable.
What does lscpu show? I suspect being a big.little platform you'll
find that all the CPUs work but it might only run one cluster at a
time, or only power up the second cluster under load. I'm not sure
what the algorithms the cpu frequency drivers use for the exynos
platforms, I suspect it depends on other factors as well such as
thermal temp (the tmon util in kernel-tools might give you insight
there).
> I will now attempt to get the system installed on the eMMC card. I will
> report on that progress later.
>
> Stewart
>
>
> On 08/23/2017 04:39 PM, Dennis Gilmore wrote:
>> El mié, 23-08-2017 a las 14:43 -0700, Stewart Samuels escribió:
>>> HI Dennis
>>>
>>> Examining your process stated below, did you really append the u-
>>> boot.dtb to the u-boot.bin file in the u-boot-dtb.bin file? Why did
>>> you concatenate them? That seems out of the norm. Why not just
>>> flash the u-boot.bin file provided by Fedora?
>>>
>>> Regards,
>>> Stewart
>> I did concatnate them. From experience u-boot will load the dtb from
>> the end of the u-boot binary. and u-boot needs the dtb in modern u-
>> boots to define the hardware. u-boot build process for some boards does
>> the concatnation, not sure if the xu3 u-boot makes a u-boot-dtb.bin
>> file and we do not ship it, or its just not making it.
>>
>> Dennis
>>> On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
>>>> El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
>>>>> Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
>>>>> --
>>>>>
>>>>> Hello Dennis,
>>>>>
>>>>> that looks beautiful. You have a running Odroid-XU4 with actual
>>>>> Kernel
>>>>> with Fedora 26 !!
>>>>>
>>>>> How did you manage it? I haven't so much luck with the
>>>>> installation.
>>>>>
>>>>> Thanks
>>>>> Andreas
>>>> I ran
>>>>
>>>> xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB
>>>> cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
>>>> cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
>>>> I grabbed from https://github.com/hardkernel/u-boot/tree/odroidxu4-
>>>> v201
>>>> 7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
>>>> tzsw.bin.hardkernel and sd_fusing.sh
>>>> then ran
>>>> sh sd_fusing.sh /dev/sdb
>>>> I used parted to resize partition 4 mounted it and ran xfs_growfs
>>>> so it
>>>> filled the sd card
>>>>
>>>> I mounted partition 2 and edited extlinux/extlinux.conf adding
>>>> cpuidle.off=1 to the append line. I did have to edit etc/passwd and
>>>> unlock the root account as initial-setup is not running.
>>>>
>>>> of couse /dev/sdb was my sdcard, make sure you have the right
>>>> device
>>>> for yours. It does seem that the nic is not detected however.
>>>>
>>>> Dennis
>>>>
>>>>
>>>> _______________________________________________
>>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>>> _______________________________________________
>>> arm mailing list -- arm(a)lists.fedoraproject.org
>>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>> _______________________________________________
>> arm mailing list -- arm(a)lists.fedoraproject.org
>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
6:06 p.m.
BTW, the device is an eMMC device connected to the system via a USB
adaptor. Would that make a difference per the UUIDs?
Stewart
On 08/22/2017 04:03 PM, Stewart Samuels wrote:
Dennis,
I let the system try to boot and gave it more time with the dracut
messages. It dumps me into the dracut login via emergency mode
looking for the root partition it seems. It cannot find the system
drive via the UUID that I showed in my last email is the UUID for the
root partition. See the output on my serial console now. What do you
suggest?
Stewart
--------------------------------------------------------------
.
.
.
[ 221.513878] dracut-initqueue[484]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 222.098261] dracut-initqueue[484]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 222.681174] dracut-initqueue[484]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 222.683247] dracut-initqueue[484]: Warning: Could not boot.
[ 224.157646] dracut-initqueue[484]: Warning:
/dev/disk/by-uuid/11cf09b5-43b2-4588-969d-550b4e2af055 does not exist
Starting Setup Virtual Console...
[ OK 224.359135] audit: type=1130 audit(1498600128.720:15): pid=1
uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit'
m] Started Setup Virtual Console[ 224.384023] audit: type=1131
audit(1498600128.720:16): pid=1 uid=0 auid=4294967295 ses=429496'
.
Starting Dracut Emergency Shell...
[ 224.501053] audit: type=1131 audit(1498600128.862:17): pid=1 uid=0
auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymo'
Warning: /dev/disk/by-uuid/11cf09b5-43b2-4588-969d-550b4e2af055 does
not exist
Generating "/run/initramfs/rdsosreport.txt"
Entering emergency mode. Exit the shell to continue.
Type "journalctl" to view system logs.
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick
or /boot
after mounting them and attach it to a bug report.
dracut:/#
--------------------------------------------------------------
On 08/22/2017 03:46 PM, Stewart Samuels wrote:
> Dennis,
>
> I have confirmed the UUID is still 11cf09b5-43b2-4588-969d-550b4e2af05.
>
> See output from my Ubuntu login that follows. Our root partition
> here shows up as /dev/sda4.
>
> Stewart
>
>
------------------------------------------------------------------------------------------------------
>
>
>
> Ubuntu 16.04.2 LTS odroid ttySAC2
>
> odroid login:
> Password:
>
> Login incorrect
> odroid login: odroid
> Password:
> Welcome to Ubuntu 16.04.2 LTS (GNU/Linux 4.9.27-35 armv7l)
>
> * Documentation: https://help.ubuntu.com
> * Management: https://landscape.canonical.com
> * Support: https://ubuntu.com/advantage
>
> 131 packages can be updated.
> 1 update is a security update.
>
>
> The programs included with the Ubuntu system are free software;
> the exact distribution terms for each program are described in the
> individual files in /usr/share/doc/*/copyright.
>
> Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
> applicable law.
>
> odroid@odroid:~$ blkid
> /dev/mmcblk1p1: SEC_TYPE="msdos" LABEL="boot"
UUID="52AA-6867"
> TYPE="vfat" PARTUUID="3cedfd53-01"
> /dev/mmcblk1p2: LABEL="rootfs"
> UUID="e139ce78-9841-40fe-8823-96a304a09859" TYPE="ext4"
> PARTUUID="3cedfd53-02"
> /dev/sda1: UUID="1E1E-EBA6" TYPE="vfat"
PARTUUID="3cedfd53-01"
> /dev/sda2: LABEL="_boot"
UUID="9bef0c7b-ced7-453b-bb4f-5072d3810d44"
> TYPE="ext4" PARTUUID="3cedfd53-02"
> /dev/sda3: UUID="8753dccc-b774-4213-82fc-6941ced77673"
TYPE="swap"
> PARTUUID="3cedfd53-03"
> /dev/sda4: LABEL="_root"
UUID="11cf09b5-43b2-4588-969d-550b4e2af055"
> TYPE="ext4" PARTUUID="3cedfd53-04"
> odroid@odroid:~$
>
>
>
>
------------------------------------------------------------------------------------------------------
>
>
>
> On 08/22/2017 03:18 PM, Dennis Gilmore wrote:
>> El mar, 22-08-2017 a las 15:14 -0700, Stewart Samuels escribió:
>>> Hello Dennis,
>>>
>>> The parameter you provided me below was incorrect (spelling error).
>>> I used cpuidle.off=1 and the system now boot much further, but
>>> eventually goes into a:
>>>
>>>> dracut-initqueue[493]: Warning: dracut-initqueue timeout - starting
>>>> timeout scripts
>>> loop and never completes the boot process.
>>>
>>> Any other suggestions? See the output from the serial port that
>>> follows:
>>>
>>> -------------------------------------------------------------------
>>>
>> sorry for the typo I meant cpuidle.off=1 can you confirm that the uuid
>> of the root filesystem is still 11cf09b5-43b2-4588-969d-550b4e2af055
>> and has not ben changed?
>>
>> Dennis
>
5:26 a.m.
Am 09.08.2017 um 20:57 schrieb Stewart Samuels:
Hello Andreas,
I have been away for awhile as my wife and I relocated from the East
Coast of the U.S. to Oregon. Now that we are settling in a bit, I am
once again finding some time to work on my Odroid XU4.
I hope all is well with you. I see you have been working hard on trying
to get the Odroid working with Fedora 26.
I have been periodically trying new versions of Fedora since Fedora 24
kernel 4.6.5-300.fc24, including Fedora 26. Something broke after the
4.6.5-300.fc24 release. I cannot tell if the problem lies in the newer
u-boot.bin or elsewhere. After the system got broken, I no longer get
any output though the serial cable to determine where such problems
lie. However, if I install the Hardkernel Ubuntu Mate with 4.9 kernel,
everything works fine. I get output through the serial cable and the
system boots up beautifully.
is it possible for you to email me a zipped copy of the u-boot.bin file
you are using to boot? Is it the 4.6.5-300.fc24 version?
Thanks.
Kind regards,
Stewart
On 07/25/2017 12:17 AM, arm_ml(a)rirasoft.de wrote:
> Hi there,
>
> I've managed to get Fedora 26 run with kernel 4.6.5-300.fc24.armv7hl
> on Odroid-XU4 with Cloudshell 2. The onbord RAID 1 (USB-Attached SCSI
> (UAS)) is working with kernel 4.6.5-300.fc24.
>
>
> [root@myodroid ~]# lsusb -d 152d:0561
> Bus 004 Device 003: ID 152d:0561 JMicron Technology Corp. / JMicron
> USA Technology Corp.
> [root@myodroid ~]#
>
> Next steps to do:
>
> - move OS from SD-Card to more faster eMMC-Card. How to do it?
> - Kernel update to actual version. I've update Kernel to
> 4.11.11-300.fc26 and system boots with 8 CPU (FC24 = 5 CPU), but only
> the first part of kernel is booting; then it stops.
> - compiling modules to activate the color LCD
>
> Is there anybody who can help me with the first 2 steps ?
>
>
> Thanks
> Andreas
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
_______________________________________________
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
Hello Stewart,
I want to install a fresh version of Fedora 26 on my Oroid-Xu4, but no
success. Then I tried to update Fedora 26 to 26, all applications ar now
on 26, only the kernel is 24. The 26 kernel still boots up (with 8!
cores) but it hangs at
[ 6.013567] NET: Registered protocol family 10
u-boot.bin
I'm using always the sme version from the git repository.
Hope it helps.
Andreas
2429
days inactive
2465
days old
53 comments
8 participants
participants (8)
-
Andreas Reschke -
arm_ml＠rirasoft.de
-
Dennis Gilmore -
dennis＠ausil.us
-
Paul Whalen -
Peter Robinson -
Stephen John Smoogen -
Stewart Samuels