Stable kernel 2.6.37.6 for Fedora on Toshiba AC100 and Question

[Gordan Bobic]

On 11/05/2011 18:54, intersolar-direct wrote:
>  We use Fedora rootfs from Genesi Smartbook. But we have little
> problem -
>  FSTAB seeking rootfs in different place - mmcblk1p2
>  Where need to change for FSTAB seeking rootfs in right place - mmcblk0p1 ? 
If the bootstrap is anything like what it was before, I'm guessing you 
forgot to change it in the initrd. The rootfs locations are hard-coded. 
While you're at it, you may want to make the initrd mount the rootfs 
read-only so it can be fscked by rc.sysinit. :)

>  2. Two testing - new rootFS from this
>  http://fedoraproject.org/wiki/Architectures/ARM/F13-ARM-Beta2 (little hint)
>  If we use new rootfs from this -
>  http://scotland.proximity.on.ca/fedora-arm/beta/f13/rootfs-f13-beta3-2011...
>  from 11-May-2011 10:52 116M - all working, but only comand prompt (NO
>  GUI). 
Just out of interest - do the recent nvidia drivers work properly on the 
AC100 now, with decent, usable acceleration for things like video playback?

>  Its requered this comand (for working wireless internet):
>  apt-get install wpasupplicant
>  apt-get install aptitude
>  modprobe rt2800usb
>  wpa_passphrase ssid password > /etc/wpa_supplicant/ssid.conf
>  wpa_supplicant -c /etc/wpa_supplicant/ssid.conf -i wlan0 -D wext
>  after that (download & start GNOME)
>  apt-get install gnome
>  apt-get install xorg 
Hmm... Don't we use yum on Fedora?

Gordan

[Gordan Bobic]

Hmm, I've had a look around on the link you provided but I can't find 
the kernel sources anywhere. Can you post a link to the sources and/or 
patches that make it work on the AC100?

Gordan

On 05/11/2011 06:54 PM, intersolar-direct wrote:
>  Sorry for delay. We have new, stable kernel 2.6.37.6
>  Input devices works correctly, work Wireless & 3G & more stuff. Its
>  build w/o sound & uncorrectly sleep (suspend).
>  About Fedora on Toshiba AC100. We have launch new kernel 2.6.37 w.
>  Fedora ARM13
>  This guide for install Fedora ARM on Toshiba AC100 2.6.37
>  http://www.pole.su/Toshiba-AC100-Fedora-2.6.37-install-ENG.htm
>  if we change one string, we install Fedora onToshiba AC100 well:
>  This string:
>  wget http://ac100.gudinna.com/tegra-rootfs.tgz
>  tar xvf tegra-rootfs.tgz --numeric-owner -C /mnt/mmc tar xvf
>  tegra-rootfs.tgz - numeric-owner-C / mnt / mmc
>  need change to:
>  wget http://ausil.us/smartbook/smartbook-rootfs-f13.tar.bz2
>  tar xvf smartbook-rootfs-f13.tar.bz2 --numeric-owner -C /mnt/mmc tar xvf
>  smartbook-rootfs-f13.tar.bz2 - numeric-owner-C / mnt / mmc
>  We use Fedora rootfs from Genesi Smartbook. But we have little problem -
>  FSTAB seeking rootfs in different place - mmcblk1p2
>  Where need to change for FSTAB seeking rootfs in right place - mmcblk0p1 ?
>  2. Two testing - new rootFS from this
>  http://fedoraproject.org/wiki/Architectures/ARM/F13-ARM-Beta2 (little hint)
>  If we use new rootfs from this -
>  http://scotland.proximity.on.ca/fedora-arm/beta/f13/rootfs-f13-beta3-2011...
>  from 11-May-2011 10:52 116M - all working, but only comand prompt (NO
>  GUI). Its requered this comand (for working wireless internet):
>  apt-get install wpasupplicant
>  apt-get install aptitude
>  modprobe rt2800usb
>  wpa_passphrase ssid password > /etc/wpa_supplicant/ssid.conf
>  wpa_supplicant -c /etc/wpa_supplicant/ssid.conf -i wlan0 -D wext
>  after that (download & start GNOME)
>  apt-get install gnome
>  apt-get install xorg
>
>  startx
>  --------
>  Good luck
>
>
>
>  _______________________________________________
>  arm mailing list
>  arm(a)lists.fedoraproject.org
>  https://admin.fedoraproject.org/mailman/listinfo/arm