2007/5/18, Aracele <aracellecunha@gmail.com>:

Galera eu tentei.......

mas tá difícil para uma usuária básica....

estou colocando um passo a passo para alguém fazer o favor de complementar (eu sei que é pedir de mais J)

Vai ajudar bastante!!!!

caso esteja faltando algo adicione o mais claro possivel

Agradacida

{As dificuldades são todas eu nunca usei fedora eu usada o debian }

tudo começou assim:

[root@localhost ~]# adsl-setup

Welcome to the ADSL client setup. First, I will run some checks on

your system to make sure the PPPoE client is installed properly...

LOGIN NAME

Enter your Login Name (default root): ??????

Seu login com o provedor
ex.

aracele@oi.com.br

INTERFACE

Enter the Ethernet interface connected to the ADSL modem

For Solaris, this is likely to be something like /dev/hme0.

For Linux, it will be ethX, where 'X' is a number.

(default eth0): ?????????

Sua interface Lan
Se tiver uma só será a eth0, nesse caso só aperta enter

Do you want the link to come up on demand, or stay up continuously?

If you want it to come up on demand, enter the idle time in seconds

after which the link should be dropped. If you want the link to

stay up permanently, enter 'no' (two letters, lower-case.)

NOTE: Demand-activated links do not interact well with dynamic IP

addresses. You may have some problems with demand-activated links.

Enter the demand value (default no): ??????????

Apenas aperta enter

DNS

Please enter the IP address of your ISP's primary DNS server.

If your ISP claims that 'the server will provide dynamic DNS addresses',

enter 'server' (all lower-case) here.

If you just press enter, I will assume you know what you are

doing and not modify your DNS setup.

Enter the DNS information here: ?????????

server

Please enter the IP address of your ISP's secondary DNS server.

If you just press enter, I will assume there is only one DNS server.

Enter the secondary DNS server address here: ????????????

PASSWORD

Please enter your Password: ????

Please re-enter your Password: ??????

Sua senha com o provedor

USERCTRL

Please enter 'yes' (three letters, lower-case.) if you want to allow

normal user to start or stop DSL connection (default yes): ?????????

Aperta enter pelo menos

FIREWALLING

Please choose the firewall rules to use. Note that these rules are

very basic. You are strongly encouraged to use a more sophisticated

firewall setup; however, these will provide basic security. If you

are running any servers on your machine, you must choose 'NONE' and

set up firewalling yourself. Otherwise, the firewall rules will deny

access to all standard servers like Web, e-mail, ftp, etc. If you

are using SSH, the rules will block outgoing SSH connections which

allocate a privileged source port.

The firewall choices are:

0 - NONE: This script will not set any firewall rules. You are responsible

          for ensuring the security of your machine. You are STRONGLY

        recommended to use some kind of firewall rules.

1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation

2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway

                for a LAN

Choose a type of firewall (0-2): ????????

Start this connection at boot time

Do you want to start this connection at boot time?

Please enter no or yes (default no):?????????

yes