I have a small private Koji setup here which has worked well for quite some time. I have only two builders, both running up to date x86_64 Fedora 16. I am having a strange issue where when I build Asterisk 10 for Fedora 15 x86_64 on one of the builders, Asterisk will fail to start with an invalid 'opcode message'. However, If I build it on the other builder, Asterisk will work as expected.
I am truly not sure where to begin, but I've only seen this issue start to occur within the last month or so.
The only real difference between the two builders are the CPUs. Showing the first of each below, the builder that produces Asterisk builds which fail is:
~]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz stepping : 7 microcode : 0x25 cpu MHz : 1600.000 cache size : 8192 KB physical id : 0 siblings : 8 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid bogomips : 6784.77 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:
And the builder that produces a working Asterisk build is: ~]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Pentium(R) D CPU 2.80GHz stepping : 4 microcode : 0x4 cpu MHz : 2800.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl est cid cx16 xtpr pdcm lahf_lm bogomips : 5585.86 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management:
The (first) CPU of the Fedora 15 x86_64 system on which I am attempting to run the Asterisk build is: ~]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Xeon(TM) CPU 2.80GHz stepping : 3 cpu MHz : 2800.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl cid cx16 xtpr bogomips : 5585.42 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management:
As I said, I'm not even sure where to begin, so I'm not sure that information is helpful.
The build log which creates the inoperable Asterisk: [1080956.984634] asterisk[2294] trap invalid opcode ip:516e52 sp:7fffcfef3600 error:0 in asterisk[400000+197000] is here: http://messinet.com/~amessina/asterisk_invalid_opcode_build.log
The 'good' build log is here: http://messinet.com/~amessina/asterisk_success_build.log
The spec file is 99.9% the same as Jeffrey Ollie's official Fedora spec file and is here: http://messinet.com/~amessina/asterisk.spec
Thanks in advance for your help. -A
buildsys@lists.fedoraproject.org
-
Anthony Joseph Messina