ERROR: Could not find useradd in chroot, maybe the install failed? in mock_output.log

[Radha Venkatesh (radvenka)]

I have set up a koji build system and on running a scratch build (koji build --scratch
dist-ncp bzip2-1.0.5-7.el6_0.src.rpm), I see the below error in mock_output.log. All the
source rpms have been imported into the build server.

INFO: mock.py version 1.1.32 starting...
Start: init plugins
INFO: selinux enabled
Finish: init plugins
Start: run
Start: lock buildroot
Start: clean chroot
Finish: clean chroot
Finish: lock buildroot
Start: chroot init
Start: lock buildroot
Mock Version: 1.1.32
INFO: Mock Version: 1.1.32
INFO: calling preinit hooks
Start: device setup
Finish: device setup
Start: yum update
Start: Outputting list of available packages
Finish: Outputting list of available packages
Finish: yum update
ERROR: Could not find useradd in chroot, maybe the install failed?

Here are the packages I have added to the group

koji list-groups dist-ncp-build
  bash: None, default  [dist-ncp-build]
  bzip2: None, default  [dist-ncp- build]
  coreutils: None, default  [dist-ncp-build]
  cpio: None, default  [dist-ncp-build]
  cvs: None, default  [dist-ncp-build]
  diffutils: None, default  [dist-ncp-build]
  fedora-release: None, default  [dist-ncp-build]
  findutils: None, default  [dist-ncp-build]
  gawk: None, default  [dist-ncp-build]
  gcc: None, default  [dist-ncp-build]
  gcc-c++: None, default  [dist-ncp-build]
  gnupg: None, default  [dist-ncp-build]
  grep: None, default  [dist-ncp-build]
  gzip: None, default  [dist-ncp-build]
  info: None, default  [dist-ncp-build]
  make: None, default  [dist-ncp-build]
  patch: None, default  [dist-ncp-build]
  redhat-rpm-config: None, default  [dist-ncp-build]
  rpm-build: None, default  [dist-ncp-build]
  rpmdevtools: None, default  [dist-ncp-build]
  sed: None, default  [dist-ncp-build]
  shadow-utils: None, default  [dist-ncp-build]
  tar: None, default  [dist-ncp-build]
  unzip: None, default  [dist-ncp-build]
  utils-linux-ng: None, default  [dist-ncp-build]
  wget: None, default  [dist-ncp-build]
  which: None, default  [dist-ncp-build]

What am I missing?

Thanks,
Radha.

[Michael Cronenworth]

On 09/04/2013 11:17 AM, Radha Venkatesh (radvenka) wrote:
>  ERROR: Could not find useradd in chroot, maybe the install failed?
Do you have the root.log output? Does it show shadow-utils to be installed
during the build?

[Radha Venkatesh (radvenka)]

The root.log output looks like this (there is no mention of shadow-utils) and shadow-utils
is installed on the box. 
rpm -qa | grep shadow
shadow-utils-4.1.4.2-13.el6.x86_64


root.log

DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp -build-13-8/root/dev/shm
DEBUG backend.py:472:  kver == 2.6.32-358.el6.x86_64
DEBUG util.py:314:  Executing command: ['/bin/mount', '-n', '-t',
'proc', 'proc', '/var/lib/mock/dist-ncp -build-13-8/root/proc']
with env {'LANG': 'en_US.UTF-8', 'TERM': 'vt100',
'SHELL': '/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/mount', '-n', '-t',
'sysfs', 'mock_chroot_sys', '/var/lib/mock/dist-ncp
-build-13-8/root/sys'] with env {'LANG': 'en_US.UTF-8',
'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOSTNAME':
'mock', 'HOME': '/builddir', 'PATH':
'/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/mount', '-n', '-t',
'tmpfs', 'mock_chroot_shmfs',
'/var/lib/mock/dist-ncp-build-13-8/root/dev/shm'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/mount', '-n', '-t',
'devpts', '-o', 'gid=5,mode=0620,ptmxmode=0666,newinstance',
'mock_chroot_devpts', '/var/lib/mock/dist-ncp -build-13-8/root/dev/pts']
with env {'LANG': 'en_US.UTF-8', 'TERM': 'vt100',
'SHELL': '/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/mount', '-n',
'--bind', '/tmp/mock-selinux-plugin.eMHC0m', '/var/lib/mock/dist-ncp
-build-13-8/root/proc/filesystems'] with env {'LANG': 'en_US.UTF-8',
'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOSTNAME':
'mock', 'HOME': '/builddir', 'PATH':
'/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG backend.py:948:  ['/usr/bin/yum', '--installroot',
'/var/lib/mock/dist-ncp-build-13-8/root/', 'groupinstall',
'build']
DEBUG util.py:314:  Executing command: ['/usr/bin/yum', '--installroot',
'/var/lib/mock/dist-ncp -build-13-8/root/', 'groupinstall',
'build', '--setopt=tsflags=nocontexts'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'PROMPT_COMMAND':
'echo -n "<mock-chroot>"', 'HOME': '/builddir',
'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:264:  Warning: Group build does not have any packages.
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: /usr/bin/repoquery -c /var/lib/mock/dist-ncp
-build-13-8/root//etc/yum.conf -a --qf '%{nevra} %{buildtime} %{size} %{pkgid}
%{repoid}' > /var/lib/mock/dist-ncp-build-13-8/result/available_pkgs with env
{'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/umount', '-n',
'/var/lib/mock/dist-ncp -build-13-8/root/proc/filesystems'] with env
{'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/umount', '-n', '-l',
'/var/lib/mock/dist-ncp-build-13-8/root/dev/pts'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/umount', '-n', '-l',
'/var/lib/mock/dist-ncp -build-13-8/root/dev/shm'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/umount', '-n', '-l',
'/var/lib/mock/dist-ncp -build-13-8/root/sys'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/umount', '-n', '-l',
'/var/lib/mock/dist-ncp -build-13-8/root/proc'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:116:  kill orphans

Mock_output.log

INFO: mock.py version 1.1.32 starting...
Start: init plugins
INFO: selinux enabled
Finish: init plugins
Start: run
Start: lock buildroot
Start: clean chroot
Finish: clean chroot
Finish: lock buildroot
Start: chroot init
Start: lock buildroot
Mock Version: 1.1.32
INFO: Mock Version: 1.1.32
INFO: calling preinit hooks
Start: device setup
Finish: device setup
Start: yum update
Start: Outputting list of available packages
Finish: Outputting list of available packages
Finish: yum update
ERROR: Could not find useradd in chroot, maybe the install failed?

-----Original Message-----
From: buildsys-bounces(a)lists.fedoraproject.org
[mailto:[e-mail]] On Behalf Of Michael Cronenworth
Sent: Wednesday, September 04, 2013 2:45 PM
To: buildsys(a)lists.fedoraproject.org
Subject: Re: ERROR: Could not find useradd in chroot, maybe the install failed? in
mock_output.log

On 09/04/2013 11:17 AM, Radha Venkatesh (radvenka) wrote:
>  ERROR: Could not find useradd in chroot, maybe the install failed?
>  
Do you have the root.log output? Does it show shadow-utils to be installed
during the build?
--
buildsys mailing list
buildsys(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/buildsys

[Michael Cronenworth]

On 09/04/2013 05:13 PM, Radha Venkatesh (radvenka) wrote:
>  The root.log output looks like this (there is no mention of
> shadow-utils) and shadow-utils is installed on the box.
>  rpm -qa | grep shadow
>  shadow-utils-4.1.4.2-13.el6.x86_64 
Koji/mock do not use your host system's packages. Mock sets up a chroot 
and installs the base packages in your build group and uses that 
environment to compile your package.

Your root.log looks like your Koji is missing some setup steps. This is 
what a working root.log should look like. Notice the yum package install 
output that lists packages to be installed.

http://kojipkgs.fedoraproject.org//packages/mingw-gnutls/3.1.11/1.fc19/da...

[Radha Venkatesh (radvenka)]

I am sorry I was not clear in my previous email - I had just pasted the tail end of the
root.log. This is the root.log in its entirety.

INFO backend.py:1017:  Mock Version: 1.1.32
DEBUG backend.py:334:  rootdir = /var/lib/mock/dist-ncp-build-13-8/root/
DEBUG backend.py:335:  resultdir = /var/lib/mock/dist-ncp-build-13-8/result
INFO backend.py:338:  calling preinit hooks
DEBUG backend.py:505:  create skeleton dirs
DEBUG util.py:62:  ensuring that dir exists:
/var/lib/mock/dist-ncp-build-13-8/root/var/lib/rpm
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/var/lib/rpm
DEBUG util.py:62:  ensuring that dir exists:
/var/lib/mock/dist-ncp-build-13-8/root/var/lib/yum
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/var/lib/yum
DEBUG util.py:62:  ensuring that dir exists:
/var/lib/mock/dist-ncp-build-13-8/root/var/lib/dbus
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/var/lib/dbus
DEBUG util.py:62:  ensuring that dir exists:
/var/lib/mock/dist-ncp-build-13-8/root/var/log
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/var/log
DEBUG util.py:62:  ensuring that dir exists:
/var/lib/mock/dist-ncp-build-13-8/root/var/lock/rpm
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/var/lock/rpm
DEBUG util.py:62:  ensuring that dir exists:
/var/lib/mock/dist-ncp-build-13-8/root/var/cache/yum
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/var/cache/yum
DEBUG util.py:62:  ensuring that dir exists:
/var/lib/mock/dist-ncp-build-13-8/root/etc/rpm
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/etc/rpm
DEBUG util.py:62:  ensuring that dir exists: /var/lib/mock/dist-ncp-build-13-8/root/tmp
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/tmp
DEBUG util.py:62:  ensuring that dir exists:
/var/lib/mock/dist-ncp-build-13-8/root/tmp/ccache
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/tmp/ccache
DEBUG util.py:62:  ensuring that dir exists:
/var/lib/mock/dist-ncp-build-13-8/root/var/tmp
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/var/tmp
DEBUG util.py:62:  ensuring that dir exists:
/var/lib/mock/dist-ncp-build-13-8/root/etc/yum.repos.d
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/etc/yum.repos.d
DEBUG util.py:62:  ensuring that dir exists:
/var/lib/mock/dist-ncp-build-13-8/root/etc/yum
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/etc/yum
DEBUG util.py:62:  ensuring that dir exists: /var/lib/mock/dist-ncp-build-13-8/root/proc
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/proc
DEBUG util.py:62:  ensuring that dir exists: /var/lib/mock/dist-ncp-build-13-8/root/sys
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/sys
DEBUG backend.py:527:  touch required files
DEBUG util.py:73:  touching file: /var/lib/mock/dist-ncp-build-13-8/root/etc/mtab
DEBUG util.py:73:  touching file: /var/lib/mock/dist-ncp-build-13-8/root/etc/fstab
DEBUG util.py:73:  touching file: /var/lib/mock/dist-ncp-build-13-8/root/var/log/yum.log
DEBUG backend.py:353:  configure yum
DEBUG backend.py:368:  configure yum priorities
DEBUG util.py:62:  ensuring that dir exists:
/var/lib/mock/dist-ncp-build-13-8/root/etc/yum/pluginconf.d
DEBUG util.py:65:  creating dir:
/var/lib/mock/dist-ncp-build-13-8/root/etc/yum/pluginconf.d
DEBUG backend.py:377:  configure yum rhnplugin
DEBUG util.py:62:  ensuring that dir exists:
/var/lib/mock/dist-ncp-build-13-8/root/etc/yum/pluginconf.d
DEBUG util.py:62:  ensuring that dir exists: /var/lib/mock/dist-ncp-build-13-8/root/etc
DEBUG util.py:88:  remove tree: /var/lib/mock/dist-ncp-build-13-8/root/dev
DEBUG util.py:62:  ensuring that dir exists:
/var/lib/mock/dist-ncp-build-13-8/root/dev/pts
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/dev/pts
DEBUG util.py:62:  ensuring that dir exists:
/var/lib/mock/dist-ncp-build-13-8/root/dev/shm
DEBUG util.py:65:  creating dir: /var/lib/mock/dist-ncp-build-13-8/root/dev/shm
DEBUG backend.py:472:  kver == 2.6.32-358.el6.x86_64
DEBUG util.py:314:  Executing command: ['/bin/mount', '-n', '-t',
'proc', 'proc', '/var/lib/mock/dist-ncp-build-13-8/root/proc']
with env {'LANG': 'en_US.UTF-8', 'TERM': 'vt100',
'SHELL': '/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/mount', '-n', '-t',
'sysfs', 'mock_chroot_sys',
'/var/lib/mock/dist-ncp-build-13-8/root/sys'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/mount', '-n', '-t',
'tmpfs', 'mock_chroot_shmfs',
'/var/lib/mock/dist-ncp-build-13-8/root/dev/shm'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/mount', '-n', '-t',
'devpts', '-o', 'gid=5,mode=0620,ptmxmode=0666,newinstance',
'mock_chroot_devpts', '/var/lib/mock/dist-ncp-build-13-8/root/dev/pts']
with env {'LANG': 'en_US.UTF-8', 'TERM': 'vt100',
'SHELL': '/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/mount', '-n',
'--bind', '/tmp/mock-selinux-plugin.eMHC0m',
'/var/lib/mock/dist-ncp-build-13-8/root/proc/filesystems'] with env
{'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG backend.py:948:  ['/usr/bin/yum', '--installroot',
'/var/lib/mock/dist-ncp-build-13-8/root/', 'groupinstall',
'build']
DEBUG util.py:314:  Executing command: ['/usr/bin/yum', '--installroot',
'/var/lib/mock/dist-ncp-build-13-8/root/', 'groupinstall',
'build', '--setopt=tsflags=nocontexts'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'PROMPT_COMMAND':
'echo -n "<mock-chroot>"', 'HOME': '/builddir',
'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:264:  Warning: Group build does not have any packages.
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: /usr/bin/repoquery -c
/var/lib/mock/dist-ncp-build-13-8/root//etc/yum.conf -a --qf '%{nevra} %{buildtime}
%{size} %{pkgid} %{repoid}' >
/var/lib/mock/dist-ncp-build-13-8/result/available_pkgs with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/umount', '-n',
'/var/lib/mock/dist-ncp-build-13-8/root/proc/filesystems'] with env
{'LANG': 'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/umount', '-n', '-l',
'/var/lib/mock/dist-ncp-build-13-8/root/dev/pts'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/umount', '-n', '-l',
'/var/lib/mock/dist-ncp-build-13-8/root/dev/shm'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/umount', '-n', '-l',
'/var/lib/mock/dist-ncp-build-13-8/root/sys'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:314:  Executing command: ['/bin/umount', '-n', '-l',
'/var/lib/mock/dist-ncp-build-13-8/root/proc'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'HOME':
'/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:354:  Child return code was: 0
DEBUG util.py:116:  kill orphans


-----Original Message-----
From: buildsys-bounces(a)lists.fedoraproject.org
[mailto:[e-mail]] On Behalf Of Michael Cronenworth
Sent: Wednesday, September 04, 2013 3:40 PM
To: buildsys(a)lists.fedoraproject.org
Subject: Re: ERROR: Could not find useradd in chroot, maybe the install failed? in
mock_output.log

On 09/04/2013 05:13 PM, Radha Venkatesh (radvenka) wrote:
>  The root.log output looks like this (there is no mention of
> shadow-utils) and shadow-utils is installed on the box.
>  rpm -qa | grep shadow
>  shadow-utils-4.1.4.2-13.el6.x86_64
>  
Koji/mock do not use your host system's packages. Mock sets up a chroot 
and installs the base packages in your build group and uses that 
environment to compile your package.

Your root.log looks like your Koji is missing some setup steps. This is 
what a working root.log should look like. Notice the yum package install 
output that lists packages to be installed.

http://kojipkgs.fedoraproject.org//packages/mingw-gnutls/3.1.11/1.fc19/da...

--
buildsys mailing list
buildsys(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/buildsys

[Michael Cronenworth]

On 09/04/2013 05:58 PM, Radha Venkatesh (radvenka) wrote:
>  DEBUG util.py:264:  Warning: Group build does not have any packages.
Here's the problem. I don't know your full koji setup but something is 
not setup correctly. The build target for tag dist-ncp is not right.

[Radha Venkatesh (radvenka)]

I looked into the kojid.conf and everything seems correct.

[kojid]
; The number of seconds to sleep between tasks
; sleeptime=15

; The maximum number of jobs that kojid will handle at a time
; maxjobs=10

; The minimum amount of free space (in MBs) required for each build root
; minspace=8192

; The directory root where work data can be found from the koji hub
topdir=/mnt/koji

; The directory root for temporary storage
workdir=/tmp/koji

; The directory root for mock
mockdir=/var/lib/mock

; The user to run as when doing builds
mockuser=kojiadmin

; The vendor to use in rpm headers
; vendor=Koji

; The packager to use in rpm headers
; packager=Koji

; The distribution to use in rpm headers
; distribution=Koji

; The _host string to use in mock
; mockhost=koji-linux-gnu

; The URL for the xmlrpc server
server=http://vos-cm20/kojihub

; The URL for the file access
topurl=http://vos-cm20/kojifiles

; A space-separated list of hostname:repository[:use_common] tuples that kojid is
authorized to checkout from (no quotes).
; Wildcards (as supported by fnmatch) are allowed.
; If use_common is specified and is one of "false", "no",
"off", or "0" (without quotes), then kojid will not attempt to
checkout
; a common/ dir when checking out sources from the source control system.  Otherwise, it
will attempt to checkout a common/
; dir, and will raise an exception if it cannot.
;allowed_scms=scm.example.com:/cvs/example git.example.org:/example
svn.example.org:/users/*:no

; The mail host to use for sending email notifications
;smtphost=example.com

; The From address used when sending email notifications
;from_addr=Koji Build System <buildsys(a)example.com&gt;

;configuration for Kerberos authentication

;the format of the principal used by the build hosts
;%s will be replaced by the FQDN of the host
;host_principal_format = compile/%s(a)EXAMPLE.COM

;location of the keytab
;keytab = /etc/kojid/kojid.keytab

;the service name of the principal being used by the hub
;krbservice = host

;configuration for SSL authentication

;client certificate
cert = /etc/pki/koji/kojid.pem

;certificate of the CA that issued the client certificate
ca = /etc/pki/koji/koji_ca_cert.crt

;certificate of the CA that issued the HTTP server certificate
serverca = /etc/pki/koji/koji_ca_cert.crt

-----------------------------------------------------


I created new tags to make sure I have set up the packages and the groups correctly

[kojiadmin@vos-cm20 koji]$ koji taginfo ncp-build
Tag: ncp-build [7]
Arches: x86_64
This tag is a buildroot for one or more targets
Current repo: repo#11: 2013-09-05 13:21:13.623486
Targets that build from this tag:
  ncp
External repos:
    5 dist-ncp-external-repo (/auto/tps/centos/6/x86_64/)
Inheritance:
  0    .... ncp [5]

  1    .... ncp-basedeps [8]

-------------------------------------------------------------------------

kojiadmin@vos-cm20 koji]$ koji list-pkgs
Package
-----------------------
MAKEDEV
acl
attr
audit
authconfig
basesystem
bash
binutils
bzip2
ca-certificates
centos-release
checkpolicy
chkconfig
coreutils
cpio
cracklib
cryptsetup-luks
curl
cyrus-sasl
dash
db4
dbus-glib
device-mapper-multipath
diffutils
dracut
e2fsprogs
ethtool
expat
file
filesystem
findutils
fipscheck
gamin
gawk
gcc
gdbm
glib2
glibc
gmp
gnupg2
gpgme
grep
groff
grub
grubby
gzip
hwdata
initscripts
iproute
iptables
iputils
kbd
kernel
less
libaio
libcap
libcap-ng
libcgroup
libdrm
libedit
libffi
libgcrypt
libgpg-error
libidn
libnih
libpciaccess
libselinux
libsemanage
libsepol
libssh2
libusb
libuser
libutempter
libxml2
logrotate
lua
m4
mingetty
module-init-tools
ncurses
net-tools
newt
nspr
nss
nss-softokn
nss-util
ntp
openldap
openssh
openssl
pam
passwd
pcre
perl
pinentry
plymouth
policycoreutils
popt
procps
psmisc
pth
pygpgme
python
python-iniparse
python-pycurl
python-urlgrabber
readline
redhat-logos
rootfiles
rpm
rsync
rsyslog
sed
selinux-policy
setup
shadow-utils
slang
sqlite
tar
tzdata
udev
upstart
ustr
util-linux-ng
which
yum
yum-metadata-parser
zlib
tzdata-2012j


I still see the same error.

Thanks,
Radha.

-----Original Message-----
From: buildsys-bounces(a)lists.fedoraproject.org
[mailto:[e-mail]] On Behalf Of Michael Cronenworth
Sent: Wednesday, September 04, 2013 5:54 PM
To: buildsys(a)lists.fedoraproject.org
Subject: Re: ERROR: Could not find useradd in chroot, maybe the install failed? in
mock_output.log

On 09/04/2013 05:58 PM, Radha Venkatesh (radvenka) wrote:
>  DEBUG util.py:264:  Warning: Group build does not have any packages.
>  
Here's the problem. I don't know your full koji setup but something is 
not setup correctly. The build target for tag dist-ncp is not right.
--
buildsys mailing list
buildsys(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/buildsys

[Michael Cronenworth]

On 09/05/2013 03:41 PM, Radha Venkatesh (radvenka) wrote:
>  I still see the same error. 
Going back to your original e-mail, I don't see the group "build". The
output of
list-groups should echo "build" such as this:

$ koji list-groups f18-build
build  [f18-build]
  bash: None, default  [f18-build]
  bzip2: None, default  [f18-build]
  coreutils: None, default  [f18-build]
...

Are you running this?
$ koji add-group ncp-build build
$ koji add-group-pkg ncp-build build <pkg1> etc...

[Radha Venkatesh (radvenka)]

Yes, I have run the below commands.

Here is the output of

[kojiadmin@vos-cm20 koji]$ koji list-groups ncp-build
build  [ncp-basedeps]
  bash: None, default  [ncp-basedeps]
  bzip2: None, default  [ncp-basedeps]
  coreutils: None, default  [ncp-basedeps]
  cpio: None, default  [ncp-basedeps]
  cvs: None, default  [ncp-basedeps]
  diffutils: None, default  [ncp-basedeps]
  findutils: None, default  [ncp-basedeps]
  gawk: None, default  [ncp-basedeps]
  gcc: None, default  [ncp-basedeps]
  gcc-c++: None, default  [ncp-basedeps]
  gnupg: None, default  [ncp-basedeps]
  grep: None, default  [ncp-basedeps]
  gzip: None, default  [ncp-basedeps]
  info: None, default  [ncp-basedeps]
  make: None, default  [ncp-basedeps]
  patch: None, default  [ncp-basedeps]
  redhat-rpm-config: None, default  [ncp-basedeps]
  rpm-build: None, default  [ncp-basedeps]
  rpmdevtools: None, default  [ncp-basedeps]
  sed: None, default  [ncp-basedeps]
  shadow-utils: None, default  [ncp-basedeps]
  tar: None, default  [ncp-basedeps]
  unzip: None, default  [ncp-basedeps]
  util-linux-ng: None, default  [ncp-basedeps]
  wget: None, default  [ncp-basedeps]
  which: None, default  [ncp-basedeps]
srpm-build  [ncp-basedeps]
  bash: None, default  [ncp-basedeps]
  bzip2: None, default  [ncp-basedeps]
  coreutils: None, default  [ncp-basedeps]
  cpio: None, default  [ncp-basedeps]
  cvs: None, default  [ncp-basedeps]
  diffutils: None, default  [ncp-basedeps]
  findutils: None, default  [ncp-basedeps]
  gawk: None, default  [ncp-basedeps]
  gcc: None, default  [ncp-basedeps]
  gcc-c++: None, default  [ncp-basedeps]
  gnupg: None, default  [ncp-basedeps]
  grep: None, default  [ncp-basedeps]
  gzip: None, default  [ncp-basedeps]
  info: None, default  [ncp-basedeps]
  make: None, default  [ncp-basedeps]
  patch: None, default  [ncp-basedeps]
  redhat-rpm-config: None, default  [ncp-basedeps]
  rpm-build: None, default  [ncp-basedeps]
  rpmdevtools: None, default  [ncp-basedeps]
  sed: None, default  [ncp-basedeps]
  shadow-utils: None, default  [ncp-basedeps]
  tar: None, default  [ncp-basedeps]
  unzip: None, default  [ncp-basedeps]
  util-linux-ng: None, default  [ncp-basedeps]
  wget: None, default  [ncp-basedeps]
  which: None, default  [ncp-basedeps]

[kojiadmin@vos-cm20 koji]$ koji taginfo ncp-build
Tag: ncp-build [7]
Arches: x86_64
This tag is a buildroot for one or more targets
Current repo: repo#11: 2013-09-05 13:21:13.623486
Targets that build from this tag:
  ncp
External repos:
    5 dist-ncp-external-repo (/auto/tps/centos/6/x86_64/)
Inheritance:
  0    .... ncp [5]

  1    .... ncp-basedeps [8]



-----Original Message-----
From: buildsys-bounces(a)lists.fedoraproject.org
[mailto:[e-mail]] On Behalf Of Michael Cronenworth
Sent: Thursday, September 05, 2013 1:54 PM
To: buildsys(a)lists.fedoraproject.org
Subject: Re: ERROR: Could not find useradd in chroot, maybe the install failed? in
mock_output.log

On 09/05/2013 03:41 PM, Radha Venkatesh (radvenka) wrote:
>  I still see the same error.
>  
Going back to your original e-mail, I don't see the group "build". The
output of
list-groups should echo "build" such as this:

$ koji list-groups f18-build
build  [f18-build]
  bash: None, default  [f18-build]
  bzip2: None, default  [f18-build]
  coreutils: None, default  [f18-build]
...

Are you running this?
$ koji add-group ncp-build build
$ koji add-group-pkg ncp-build build <pkg1> etc...
--
buildsys mailing list
buildsys(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/buildsys

[Mike Bonnet]

On 9/5/13 2:01 PM, Radha Venkatesh (radvenka) wrote:
>  Yes, I have run the below commands.
>
>  Here is the output of
>
>  [kojiadmin@vos-cm20 koji]$ koji list-groups ncp-build
>  build  [ncp-basedeps]
>     bash: None, default  [ncp-basedeps]
>     bzip2: None, default  [ncp-basedeps]
>     coreutils: None, default  [ncp-basedeps]
>     cpio: None, default  [ncp-basedeps]
>     cvs: None, default  [ncp-basedeps]
>     diffutils: None, default  [ncp-basedeps]
>     findutils: None, default  [ncp-basedeps]
>     gawk: None, default  [ncp-basedeps]
>     gcc: None, default  [ncp-basedeps]
>     gcc-c++: None, default  [ncp-basedeps]
>     gnupg: None, default  [ncp-basedeps]
>     grep: None, default  [ncp-basedeps]
>     gzip: None, default  [ncp-basedeps]
>     info: None, default  [ncp-basedeps]
>     make: None, default  [ncp-basedeps]
>     patch: None, default  [ncp-basedeps]
>     redhat-rpm-config: None, default  [ncp-basedeps]
>     rpm-build: None, default  [ncp-basedeps]
>     rpmdevtools: None, default  [ncp-basedeps]
>     sed: None, default  [ncp-basedeps]
>     shadow-utils: None, default  [ncp-basedeps]
>     tar: None, default  [ncp-basedeps]
>     unzip: None, default  [ncp-basedeps]
>     util-linux-ng: None, default  [ncp-basedeps]
>     wget: None, default  [ncp-basedeps]
>     which: None, default  [ncp-basedeps]
>  srpm-build  [ncp-basedeps]
>     bash: None, default  [ncp-basedeps]
>     bzip2: None, default  [ncp-basedeps]
>     coreutils: None, default  [ncp-basedeps]
>     cpio: None, default  [ncp-basedeps]
>     cvs: None, default  [ncp-basedeps]
>     diffutils: None, default  [ncp-basedeps]
>     findutils: None, default  [ncp-basedeps]
>     gawk: None, default  [ncp-basedeps]
>     gcc: None, default  [ncp-basedeps]
>     gcc-c++: None, default  [ncp-basedeps]
>     gnupg: None, default  [ncp-basedeps]
>     grep: None, default  [ncp-basedeps]
>     gzip: None, default  [ncp-basedeps]
>     info: None, default  [ncp-basedeps]
>     make: None, default  [ncp-basedeps]
>     patch: None, default  [ncp-basedeps]
>     redhat-rpm-config: None, default  [ncp-basedeps]
>     rpm-build: None, default  [ncp-basedeps]
>     rpmdevtools: None, default  [ncp-basedeps]
>     sed: None, default  [ncp-basedeps]
>     shadow-utils: None, default  [ncp-basedeps]
>     tar: None, default  [ncp-basedeps]
>     unzip: None, default  [ncp-basedeps]
>     util-linux-ng: None, default  [ncp-basedeps]
>     wget: None, default  [ncp-basedeps]
>     which: None, default  [ncp-basedeps]
>
>  [kojiadmin@vos-cm20 koji]$ koji taginfo ncp-build
>  Tag: ncp-build [7]
>  Arches: x86_64
>  This tag is a buildroot for one or more targets
>  Current repo: repo#11: 2013-09-05 13:21:13.623486
>  Targets that build from this tag:
>     ncp
>  External repos:
>       5 dist-ncp-external-repo (/auto/tps/centos/6/x86_64/)
>  Inheritance:
>     0    .... ncp [5]
>
>     1    .... ncp-basedeps [8]
>
>
>
>  -----Original Message-----
>  From: buildsys-bounces(a)lists.fedoraproject.org
> [mailto:[e-mail]] On Behalf Of Michael Cronenworth
>  Sent: Thursday, September 05, 2013 1:54 PM
>  To: buildsys(a)lists.fedoraproject.org
>  Subject: Re: ERROR: Could not find useradd in chroot, maybe the install failed? in
> mock_output.log
>
>  On 09/05/2013 03:41 PM, Radha Venkatesh (radvenka) wrote:
> > I still see the same error.
>
>  Going back to your original e-mail, I don't see the group "build". The
> output of
>  list-groups should echo "build" such as this:
>
>  $ koji list-groups f18-build
>  build  [f18-build]
>     bash: None, default  [f18-build]
>     bzip2: None, default  [f18-build]
>     coreutils: None, default  [f18-build]
>  ...
>
>  Are you running this?
>  $ koji add-group ncp-build build
>  $ koji add-group-pkg ncp-build build <pkg1> etc... 
In your first email you said "all the source rpms have been imported 
into the build server."  If you're using external repos (as it appears 
you are from looking at the output of "koji taginfo") then you shouldn't 
need to import anything.  Please see:

https://fedoraproject.org/wiki/Koji/ExternalRepoServerBootstrap

I would recommend using this aproach when setting up a new Koji server. 
  Note that the external repo URL should be a full http:// URL that is 
accessible by the build machines, not merely a local path.

If you choose to import rpms rather than using the external repo method, 
as documented in:

https://fedoraproject.org/wiki/Koji/ServerBootstrap

then you need to import both source *and* binary rpms.  The binary rpms 
are required to create the chroots where builds will happen.

[Radha Venkatesh (radvenka)]

Thank you! Importing the binary rpms solved the previous issue! 

Now I am seeing the following problem. I have imported all the necessary rpms which show
up as required (binaries) and I still see these errors. How do I resolve them?

DEBUG util.py:314:  Executing command: ['/usr/bin/yum', '--installroot',
'/var/lib/mock/dist-ncs-build-31-76/root/', 'groupinstall',
'build', '--setopt=tsflags=nocontexts'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'PROMPT_COMMAND':
'echo -n "<mock-chroot>"', 'HOME': '/builddir',
'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
DEBUG util.py:264:  Error: Package: libcurl-7.19.7-35.el6.x86_64 (build)
DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
DEBUG util.py:264:  Error: Package: openssl-1.0.0-27.el6.x86_64 (build)
DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
DEBUG util.py:264:  Error: Package: sed-4.2.1-10.el6.x86_64 (build)
DEBUG util.py:264:             Requires: /sbin/install-info
DEBUG util.py:264:  Error: Package: rpm-libs-4.8.0-32.el6.x86_64 (build)
DEBUG util.py:264:             Requires: liblzma.so.0()(64bit)
DEBUG util.py:264:  Error: Package: libcurl-7.19.7-35.el6.x86_64 (build)
DEBUG util.py:264:             Requires: libgssapi_krb5.so.2(gssapi_krb5_2_MIT)(64bit)
DEBUG util.py:264:  Error: Package: which-2.19-6.el6.x86_64 (build)
DEBUG util.py:264:             Requires: /sbin/install-info
DEBUG util.py:264:  Error: Package: libnih-1.0.1-7.el6.x86_64 (build)
DEBUG util.py:264:             Requires: libdbus-1.so.3()(64bit)
DEBUG util.py:264:  Error: Package: binutils-2.20.51.0.2-5.36.el6.x86_64 (build)
DEBUG util.py:264:             Requires: /sbin/install-info
DEBUG util.py:264:  Error: Package: grep-2.6.3-3.el6.x86_64 (build)
DEBUG util.py:264:             Requires: /sbin/install-info
DEBUG util.py:264:  Error: Package: rpm-libs-4.8.0-32.el6.x86_64 (build)
DEBUG util.py:264:             Requires: libelf.so.1()(64bit)
DEBUG util.py:264:  Error: Package: upstart-0.6.5-12.el6.x86_64 (build)

-----Original Message-----
From: buildsys-bounces(a)lists.fedoraproject.org
[mailto:[e-mail]] On Behalf Of Mike Bonnet
Sent: Thursday, September 05, 2013 2:33 PM
To: buildsys(a)lists.fedoraproject.org
Subject: Re: ERROR: Could not find useradd in chroot, maybe the install failed? in
mock_output.log

On 9/5/13 2:01 PM, Radha Venkatesh (radvenka) wrote:
>  Yes, I have run the below commands.
>
>  Here is the output of
>
>  [kojiadmin@vos-cm20 koji]$ koji list-groups ncp-build
>  build  [ncp-basedeps]
>     bash: None, default  [ncp-basedeps]
>     bzip2: None, default  [ncp-basedeps]
>     coreutils: None, default  [ncp-basedeps]
>     cpio: None, default  [ncp-basedeps]
>     cvs: None, default  [ncp-basedeps]
>     diffutils: None, default  [ncp-basedeps]
>     findutils: None, default  [ncp-basedeps]
>     gawk: None, default  [ncp-basedeps]
>     gcc: None, default  [ncp-basedeps]
>     gcc-c++: None, default  [ncp-basedeps]
>     gnupg: None, default  [ncp-basedeps]
>     grep: None, default  [ncp-basedeps]
>     gzip: None, default  [ncp-basedeps]
>     info: None, default  [ncp-basedeps]
>     make: None, default  [ncp-basedeps]
>     patch: None, default  [ncp-basedeps]
>     redhat-rpm-config: None, default  [ncp-basedeps]
>     rpm-build: None, default  [ncp-basedeps]
>     rpmdevtools: None, default  [ncp-basedeps]
>     sed: None, default  [ncp-basedeps]
>     shadow-utils: None, default  [ncp-basedeps]
>     tar: None, default  [ncp-basedeps]
>     unzip: None, default  [ncp-basedeps]
>     util-linux-ng: None, default  [ncp-basedeps]
>     wget: None, default  [ncp-basedeps]
>     which: None, default  [ncp-basedeps]
>  srpm-build  [ncp-basedeps]
>     bash: None, default  [ncp-basedeps]
>     bzip2: None, default  [ncp-basedeps]
>     coreutils: None, default  [ncp-basedeps]
>     cpio: None, default  [ncp-basedeps]
>     cvs: None, default  [ncp-basedeps]
>     diffutils: None, default  [ncp-basedeps]
>     findutils: None, default  [ncp-basedeps]
>     gawk: None, default  [ncp-basedeps]
>     gcc: None, default  [ncp-basedeps]
>     gcc-c++: None, default  [ncp-basedeps]
>     gnupg: None, default  [ncp-basedeps]
>     grep: None, default  [ncp-basedeps]
>     gzip: None, default  [ncp-basedeps]
>     info: None, default  [ncp-basedeps]
>     make: None, default  [ncp-basedeps]
>     patch: None, default  [ncp-basedeps]
>     redhat-rpm-config: None, default  [ncp-basedeps]
>     rpm-build: None, default  [ncp-basedeps]
>     rpmdevtools: None, default  [ncp-basedeps]
>     sed: None, default  [ncp-basedeps]
>     shadow-utils: None, default  [ncp-basedeps]
>     tar: None, default  [ncp-basedeps]
>     unzip: None, default  [ncp-basedeps]
>     util-linux-ng: None, default  [ncp-basedeps]
>     wget: None, default  [ncp-basedeps]
>     which: None, default  [ncp-basedeps]
>
>  [kojiadmin@vos-cm20 koji]$ koji taginfo ncp-build
>  Tag: ncp-build [7]
>  Arches: x86_64
>  This tag is a buildroot for one or more targets
>  Current repo: repo#11: 2013-09-05 13:21:13.623486
>  Targets that build from this tag:
>     ncp
>  External repos:
>       5 dist-ncp-external-repo (/auto/tps/centos/6/x86_64/)
>  Inheritance:
>     0    .... ncp [5]
>
>     1    .... ncp-basedeps [8]
>
>
>
>  -----Original Message-----
>  From: buildsys-bounces(a)lists.fedoraproject.org
> [mailto:[e-mail]] On Behalf Of Michael Cronenworth
>  Sent: Thursday, September 05, 2013 1:54 PM
>  To: buildsys(a)lists.fedoraproject.org
>  Subject: Re: ERROR: Could not find useradd in chroot, maybe the install failed? in
> mock_output.log
>
>  On 09/05/2013 03:41 PM, Radha Venkatesh (radvenka) wrote:
> > I still see the same error.
>
>  Going back to your original e-mail, I don't see the group "build". The
> output of
>  list-groups should echo "build" such as this:
>
>  $ koji list-groups f18-build
>  build  [f18-build]
>     bash: None, default  [f18-build]
>     bzip2: None, default  [f18-build]
>     coreutils: None, default  [f18-build]
>  ...
>
>  Are you running this?
>  $ koji add-group ncp-build build
>  $ koji add-group-pkg ncp-build build <pkg1> etc...
>  
In your first email you said "all the source rpms have been imported 
into the build server."  If you're using external repos (as it appears 
you are from looking at the output of "koji taginfo") then you shouldn't 
need to import anything.  Please see:

https://fedoraproject.org/wiki/Koji/ExternalRepoServerBootstrap

I would recommend using this aproach when setting up a new Koji server. 
  Note that the external repo URL should be a full http:// URL that is 
accessible by the build machines, not merely a local path.

If you choose to import rpms rather than using the external repo method, 
as documented in:

https://fedoraproject.org/wiki/Koji/ServerBootstrap

then you need to import both source *and* binary rpms.  The binary rpms 
are required to create the chroots where builds will happen.

--
buildsys mailing list
buildsys(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/buildsys

[Vijay N. Majagaonkar]

>  DEBUG util.py:264:  Error: Package: libcurl-7.19.7-35.el6.x86_64 (build)
>  DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
>  
​yum provides '*/libk5crypto.so' ​


>  DEBUG util.py:264:  Error: Package: openssl-1.0.0-27.el6.x86_64
> (build)
>  DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
>  DEBUG util.py:264:  Error: Package: sed-4.2.1-10.el6.x86_64 (build)
>  DEBUG util.py:264:             Requires: /sbin/install-info
>  
​​yum provides '*/install-info' ​​

​Yum provides gives you package name and import that package into koji,
that should fix problem of missing package.​

[Radha Venkatesh (radvenka)]

I have done that already. For libk5crypto.so, I have imported

[kojiadmin@vos-cm20 root]$ koji import
/auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_
64.rpm
uploading /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm... done
importing /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm... done

[kojiadmin@vos-cm20 root]$ koji import
/auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm
RPM already imported:
/auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm
Skipping import

But the error still persists.

From: buildsys-bounces(a)lists.fedoraproject.org
[mailto:[e-mail]] On Behalf Of Vijay N. Majagaonkar
Sent: Friday, September 06, 2013 10:24 AM
To: Discussion of Fedora build system
Subject: Re: ERROR: Could not find useradd in chroot, maybe the install failed? in
mock_output.log


DEBUG util.py:264:  Error: Package: libcurl-7.19.7-35.el6.x86_64 (build)
DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)

​yum provides '*/libk5crypto.so' ​

DEBUG util.py:264:  Error: Package: openssl-1.0.0-27.el6.x86_64 (build)
DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
DEBUG util.py:264:  Error: Package: sed-4.2.1-10.el6.x86_64 (build)
DEBUG util.py:264:             Requires: /sbin/install-info

​​yum provides '*/install-info' ​​

​Yum provides gives you package name and import that package into koji, that should fix
problem of missing package.​

[Radha Venkatesh (radvenka)]

Any inputs?

From: buildsys-bounces(a)lists.fedoraproject.org
[mailto:[e-mail]] On Behalf Of Radha Venkatesh
(radvenka)
Sent: Friday, September 06, 2013 10:49 AM
To: Discussion of Fedora build system
Subject: RE: ERROR: Could not find useradd in chroot, maybe the install failed? in
mock_output.log

I have done that already. For libk5crypto.so, I have imported

[kojiadmin@vos-cm20 root]$ koji import
/auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_
64.rpm
uploading /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm... done
importing /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm... done

[kojiadmin@vos-cm20 root]$ koji import
/auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm
RPM already imported:
/auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm
Skipping import

But the error still persists.

From: buildsys-bounces(a)lists.fedoraproject.org
[mailto:[e-mail]] On Behalf Of Vijay N. Majagaonkar
Sent: Friday, September 06, 2013 10:24 AM
To: Discussion of Fedora build system
Subject: Re: ERROR: Could not find useradd in chroot, maybe the install failed? in
mock_output.log


DEBUG util.py:264:  Error: Package: libcurl-7.19.7-35.el6.x86_64 (build)
DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)

​yum provides '*/libk5crypto.so' ​

DEBUG util.py:264:  Error: Package: openssl-1.0.0-27.el6.x86_64 (build)
DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
DEBUG util.py:264:  Error: Package: sed-4.2.1-10.el6.x86_64 (build)
DEBUG util.py:264:             Requires: /sbin/install-info

​​yum provides '*/install-info' ​​

​Yum provides gives you package name and import that package into koji, that should fix
problem of missing package.​

[Vijay N. Majagaonkar]

Check where those package available for download, you can see under repo,
pkglist file should contain those package.

On Fri, Sep 6, 2013 at 4:33 PM, Radha Venkatesh (radvenka) <
radvenka(a)cisco.com&gt; wrote:

>   Any inputs?****
>
>  ** **
>
>  *From:* buildsys-bounces(a)lists.fedoraproject.org [mailto:
>  buildsys-bounces(a)lists.fedoraproject.org] *On Behalf Of *Radha Venkatesh
>  (radvenka)
>  *Sent:* Friday, September 06, 2013 10:49 AM
>
>  *To:* Discussion of Fedora build system
>  *Subject:* RE: ERROR: Could not find useradd in chroot, maybe the install
>  failed? in mock_output.log****
>
>   ** **
>
>  I have done that already. For libk5crypto.so, I have imported ****
>
>  ** **
>
>  [kojiadmin@vos-cm20 root]$ koji import
>  /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_****
>
>  64.rpm****
>
>  uploading
>  /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm...
>  done****
>
>  importing
>  /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm...
>  done****
>
>  ** **
>
>  [kojiadmin@vos-cm20 root]$ koji import
>  /auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm ****
>
>  RPM already imported:
>  /auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm****
>
>  Skipping import****
>
>  ** **
>
>  But the error still persists.****
>
>  ** **
>
>  *From:* buildsys-bounces(a)lists.fedoraproject.org [mailto:
>  buildsys-bounces(a)lists.fedoraproject.org] *On Behalf Of *Vijay N.
>  Majagaonkar
>  *Sent:* Friday, September 06, 2013 10:24 AM
>  *To:* Discussion of Fedora build system
>  *Subject:* Re: ERROR: Could not find useradd in chroot, maybe the install
>  failed? in mock_output.log****
>
>  ** **
>
>
>  DEBUG util.py:264:  Error: Package: libcurl-7.19.7-35.el6.x86_64 (build)
>  DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)****
>
>   ** **
>
>  ​yum provides '*/libk5crypto.so' ​****
>
>   ****
>
>  DEBUG util.py:264:  Error: Package: openssl-1.0.0-27.el6.x86_64 (build)
>  DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
>  DEBUG util.py:264:  Error: Package: sed-4.2.1-10.el6.x86_64 (build)
>  DEBUG util.py:264:             Requires: /sbin/install-info****
>
>   ** **
>
>  ​​yum provides '*/install-info' ​​****
>
>  ** **
>
>  ​Yum provides gives you package name and import that package into koji,
>  that should fix problem of missing package.​****
>
>  ** **
>
>   ****
>
>  --
>  buildsys mailing list
>  buildsys(a)lists.fedoraproject.org
>  https://admin.fedoraproject.org/mailman/listinfo/buildsys
>

FAILED: BuildError: error building package (arch x86_64), mock exited with status 127

[Radha Venkatesh (radvenka)]

Thank you. I resolved the below issue by using add-pkg and add-group-pkg.

Still peeling the onion. Finally I have got to the stage where this error occurs:

koji build --scratch dist-ncs
packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm
Uploading srpm: packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm
[====================================] 100% 00:00:00 835.37 KiB   4.70 MiB/sec
Created task: 711
Task info: http://vos-cm20/koji/taskinfo?taskID=711
Watching tasks (this may be safely interrupted)...
711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free
711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free -> open (kojid-1)
  712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free
  712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free -> open (kojid-1)
  712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): open (kojid-1) -> FAILED:
BuildError: error building package (arch x86_64), mock exited with status 127; see
root.log for more information
  0 free  1 open  0 done  1 failed
711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): open (kojid-1) -> FAILED:
BuildError: error building package (arch x86_64), mock exited with status 127; see
root.log for more information
  0 free  0 open  0 done  2 failed

711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm) failed

mock_output looks like this

ERROR:
Exception(/tmp/koji/tasks/712/712/local/work/cli-build/1378840333.7562611.yaBkQoIY/bzip2-1.0.5-7.el6_0.src.rpm)
Config(dist-ncs-build-41-141) 0 minutes 1 seconds
INFO: Results and/or logs in: /var/lib/mock/dist-ncs-build-41-141/result
ERROR: Command failed. See logs for output.
# ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
--nodeps builddir/build/SPECS/bzip2.spec']

Build.log looks as follows

Executing command: ['bash', '--login', '-c', 'rpmbuild -bs
--target x86_64 --nodeps builddir/build/SPECS/bzip2.spec'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'PROMPT_COMMAND':
'echo -n "<mock-chroot>"', 'HOME': '/builddir',
'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
bash: rpmbuild: command not found
Child return code was: 127
EXCEPTION: Command failed. See logs for output.
# ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
--nodeps builddir/build/SPECS/bzip2.spec']
Traceback (most recent call last):
  File "/usr/lib/python2.6/site-packages/mockbuild/trace_decorator.py", line 70,
in trace
    result = func(*args, **kw)
  File "/usr/lib/python2.6/site-packages/mockbuild/util.py", line 359, in do
    raise mockbuild.exception.Error, ("Command failed. See logs for output.\n #
%s" % (command,), child.returncode)
Error: Command failed. See logs for output.
# ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
--nodeps builddir/build/SPECS/bzip2.spec']
LEAVE do --> EXCEPTION RAISED

I have performed all the steps need to execute rpmbuild as a non-root user. Still nothing
works.

Any suggestions?

Thanks,
Radha.



From: buildsys-bounces(a)lists.fedoraproject.org
[mailto:[e-mail]] On Behalf Of Vijay N. Majagaonkar
Sent: Friday, September 06, 2013 4:54 PM
To: Discussion of Fedora build system
Subject: Re: ERROR: Could not find useradd in chroot, maybe the install failed? in
mock_output.log

Check where those package available for download, you can see under repo, pkglist file
should contain those package.

On Fri, Sep 6, 2013 at 4:33 PM, Radha Venkatesh (radvenka)
<[e-mail]<mailto:[e-mail]>> wrote:
Any inputs?

From:
[e-mail]<mailto:[e-mail]>
[mailto:[e-mail]<mailto:[e-mail]>]
On Behalf Of Radha Venkatesh (radvenka)
Sent: Friday, September 06, 2013 10:49 AM

To: Discussion of Fedora build system
Subject: RE: ERROR: Could not find useradd in chroot, maybe the install failed? in
mock_output.log

I have done that already. For libk5crypto.so, I have imported

[kojiadmin@vos-cm20 root]$ koji import
/auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_
64.rpm
uploading /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm... done
importing /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm... done

[kojiadmin@vos-cm20 root]$ koji import
/auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm
RPM already imported:
/auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm
Skipping import

But the error still persists.

From:
[e-mail]<mailto:[e-mail]>
[mailto:[e-mail]<mailto:[e-mail]>]
On Behalf Of Vijay N. Majagaonkar
Sent: Friday, September 06, 2013 10:24 AM
To: Discussion of Fedora build system
Subject: Re: ERROR: Could not find useradd in chroot, maybe the install failed? in
mock_output.log


DEBUG util.py:264:  Error: Package: libcurl-7.19.7-35.el6.x86_64 (build)
DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)

​yum provides '*/libk5crypto.so' ​

DEBUG util.py:264:  Error: Package: openssl-1.0.0-27.el6.x86_64 (build)
DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
DEBUG util.py:264:  Error: Package: sed-4.2.1-10.el6.x86_64 (build)
DEBUG util.py:264:             Requires: /sbin/install-info

​​yum provides '*/install-info' ​​

​Yum provides gives you package name and import that package into koji, that should fix
problem of missing package.​



--
buildsys mailing list
[e-mail]<mailto:[e-mail]>
https://admin.fedoraproject.org/mailman/listinfo/buildsys

FAILED: BuildError: error building package (arch x86_64), mock exited with status 127

[Vijay N. Majagaonkar]

> >bash: rpmbuild: command not found 
rpmbuild binary is not available, install rpm-build package on your build
machine


;),
im.viji

*Every living being has a potential to become God.*


On Tue, Sep 10, 2013 at 3:31 PM, Radha Venkatesh (radvenka) <
radvenka(a)cisco.com&gt; wrote:

>   ** **
>
>  Thank you. I resolved the below issue by using add-pkg and add-group-pkg.*
>  ***
>
>  ** **
>
>  Still peeling the onion. Finally I have got to the stage where this error
>  occurs:****
>
>  ** **
>
>  koji build --scratch dist-ncs
>  packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm****
>
>  Uploading srpm:
>  packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm****
>
>  [====================================] 100% 00:00:00 835.37 KiB   4.70
>  MiB/sec****
>
>  Created task: 711****
>
>  Task info: http://vos-cm20/koji/taskinfo?taskID=711****
>
>  Watching tasks (this may be safely interrupted)...****
>
>  711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free****
>
>  711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free -> open (kojid-1)*
>  ***
>
>    712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free****
>
>    712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free -> open
>  (kojid-1)****
>
>    712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): open (kojid-1) ->
>  FAILED: BuildError: error building package (arch x86_64), mock exited with
>  status 127; see root.log for more information****
>
>    0 free  1 open  0 done  1 failed****
>
>  711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): open (kojid-1) ->
>  FAILED: BuildError: error building package (arch x86_64), mock exited with
>  status 127; see root.log for more information****
>
>    0 free  0 open  0 done  2 failed****
>
>  ** **
>
>  711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm) failed****
>
>  ** **
>
>  mock_output looks like this****
>
>  ** **
>
>  ERROR:
>
> Exception(/tmp/koji/tasks/712/712/local/work/cli-build/1378840333.7562611.yaBkQoIY/bzip2-1.0.5-7.el6_0.src.rpm)
>  Config(dist-ncs-build-41-141) 0 minutes 1 seconds****
>
>  INFO: Results and/or logs in: /var/lib/mock/dist-ncs-build-41-141/result**
>  **
>
>  ERROR: Command failed. See logs for output.****
>
>  # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
> --nodeps
>  builddir/build/SPECS/bzip2.spec']****
>
>  ** **
>
>  ​​
>  Build.log looks as follows****
>
>   ** **
>
>  Executing command: ['bash', '--login', '-c', 'rpmbuild -bs
> --target x86_64
>  --nodeps builddir/build/SPECS/bzip2.spec'] with env {'LANG':
> 'en_US.UTF-8',
>  'TERM': 'vt100', 'SHELL': '/bin/bash',
> 'HOSTNAME': 'mock',
>  'PROMPT_COMMAND': 'echo -n "<mock-chroot>"',
> 'HOME': '/builddir', 'PATH':
>  '/usr/bin:/bin:/usr/sbin:/sbin'}****
>
>  bash: rpmbuild: command not found****
>
>  Child return code was: 127****
>
>  EXCEPTION: Command failed. See logs for output.****
>
>  # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
> --nodeps
>  builddir/build/SPECS/bzip2.spec']****
>
>  Traceback (most recent call last):****
>
>    File "/usr/lib/python2.6/site-packages/mockbuild/trace_decorator.py",
>  line 70, in trace****
>
>      result = func(*args, **kw)****
>
>    File "/usr/lib/python2.6/site-packages/mockbuild/util.py", line 359, in
>  do****
>
>      raise mockbuild.exception.Error, ("Command failed. See logs for
>  output.\n # %s" % (command,), child.returncode)****
>
>  Error: Command failed. See logs for output.****
>
>  # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
> --nodeps
>  builddir/build/SPECS/bzip2.spec']****
>
>  LEAVE do --> EXCEPTION RAISED****
>
>  ** **
>
>  I have performed all the steps need to execute rpmbuild as a non-root
>  user. Still nothing works.****
>
>  ** **
>
>  Any suggestions?****
>
>  ** **
>
>  Thanks,****
>
>  Radha.****
>
>  ** **
>
>  ** **
>
>  ** **
>
>  *From:* buildsys-bounces(a)lists.fedoraproject.org [mailto:
>  buildsys-bounces(a)lists.fedoraproject.org] *On Behalf Of *Vijay N.
>  Majagaonkar
>  *Sent:* Friday, September 06, 2013 4:54 PM
>  *To:* Discussion of Fedora build system
>  *Subject:* Re: ERROR: Could not find useradd in chroot, maybe the install
>  failed? in mock_output.log****
>
>  ** **
>
>  Check where those package available for download, you can see under repo,
>  pkglist file should contain those package.****
>
>  ** **
>
>  On Fri, Sep 6, 2013 at 4:33 PM, Radha Venkatesh (radvenka) <
>  radvenka(a)cisco.com&gt; wrote:****
>
>  Any inputs?****
>
>   ****
>
>  *From:* buildsys-bounces(a)lists.fedoraproject.org [mailto:
>  buildsys-bounces(a)lists.fedoraproject.org] *On Behalf Of *Radha Venkatesh
>  (radvenka)
>  *Sent:* Friday, September 06, 2013 10:49 AM****
>
>
>  *To:* Discussion of Fedora build system****
>
>  *Subject:* RE: ERROR: Could not find useradd in chroot, maybe the install
>  failed? in mock_output.log****
>
>   ****
>
>  I have done that already. For libk5crypto.so, I have imported ****
>
>   ****
>
>  [kojiadmin@vos-cm20 root]$ koji import
>  /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_****
>
>  64.rpm****
>
>  uploading
>  /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm...
>  done****
>
>  importing
>  /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm...
>  done****
>
>   ****
>
>  [kojiadmin@vos-cm20 root]$ koji import
>  /auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm ****
>
>  RPM already imported:
>  /auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm****
>
>  Skipping import****
>
>   ****
>
>  But the error still persists.****
>
>   ****
>
>  *From:* buildsys-bounces(a)lists.fedoraproject.org [mailto:
>  buildsys-bounces(a)lists.fedoraproject.org] *On Behalf Of *Vijay N.
>  Majagaonkar
>  *Sent:* Friday, September 06, 2013 10:24 AM
>  *To:* Discussion of Fedora build system
>  *Subject:* Re: ERROR: Could not find useradd in chroot, maybe the install
>  failed? in mock_output.log****
>
>   ****
>
>
>  DEBUG util.py:264:  Error: Package: libcurl-7.19.7-35.el6.x86_64 (build)
>  DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)****
>
>    ****
>
>  ​yum provides '*/libk5crypto.so' ​****
>
>   ****
>
>  DEBUG util.py:264:  Error: Package: openssl-1.0.0-27.el6.x86_64 (build)
>  DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
>  DEBUG util.py:264:  Error: Package: sed-4.2.1-10.el6.x86_64 (build)
>  DEBUG util.py:264:             Requires: /sbin/install-info****
>
>    ****
>
>  ​​yum provides '*/install-info' ​​****
>
>   ****
>
>  ​Yum provides gives you package name and import that package into koji,
>  that should fix problem of missing package.​****
>
>   ****
>
>   ****
>
>
>  --
>  buildsys mailing list
>  buildsys(a)lists.fedoraproject.org
>  https://admin.fedoraproject.org/mailman/listinfo/buildsys****
>
>  ** **
>
>  --
>  buildsys mailing list
>  buildsys(a)lists.fedoraproject.org
>  https://admin.fedoraproject.org/mailman/listinfo/buildsys
>

FAILED: BuildError: error building package (arch x86_64), mock exited with status 127

[Radha Venkatesh (radvenka)]

I have already done that

[root@vos-cm20 result]# rpm -qa | grep rpm
deltarpm-3.5-0.5.20090913git.el6.x86_64
rpm-4.8.0-32.el6.x86_64
rpm-python-4.8.0-32.el6.x86_64
redhat-rpm-config-9.0.3-42.el6.noarch
rpmdevtools-7.5-2.el6.noarch
rpm-build-4.8.0-32.el6.x86_64
python-deltarpm-3.5-0.5.20090913git.el6.x86_64
rpmlint-0.94-2.el6.noarch
eclipse-rpm-editor-0.5.0-2.el6.x86_64
rpm-libs-4.8.0-32.el6.x86_64

From: buildsys-bounces(a)lists.fedoraproject.org
[mailto:[e-mail]] On Behalf Of Vijay N. Majagaonkar
Sent: Tuesday, September 10, 2013 12:43 PM
To: Discussion of Fedora build system
Subject: Re: FAILED: BuildError: error building package (arch x86_64), mock exited with
status 127

> >bash: rpmbuild: command not found
>  
rpmbuild binary is not available, install rpm-build package on your build machine


;),
im.viji

Every living being has a potential to become God.

On Tue, Sep 10, 2013 at 3:31 PM, Radha Venkatesh (radvenka)
<[e-mail]<mailto:[e-mail]>> wrote:

Thank you. I resolved the below issue by using add-pkg and add-group-pkg.

Still peeling the onion. Finally I have got to the stage where this error occurs:

koji build --scratch dist-ncs
packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm
Uploading srpm: packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm
[====================================] 100% 00:00:00 835.37 KiB   4.70 MiB/sec
Created task: 711
Task info: http://vos-cm20/koji/taskinfo?taskID=711
Watching tasks (this may be safely interrupted)...
711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free
711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free -> open (kojid-1)
  712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free
  712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free -> open (kojid-1)
  712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): open (kojid-1) -> FAILED:
BuildError: error building package (arch x86_64), mock exited with status 127; see
root.log for more information
  0 free  1 open  0 done  1 failed
711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): open (kojid-1) -> FAILED:
BuildError: error building package (arch x86_64), mock exited with status 127; see
root.log for more information
  0 free  0 open  0 done  2 failed

711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm) failed

mock_output looks like this

ERROR:
Exception(/tmp/koji/tasks/712/712/local/work/cli-build/1378840333.7562611.yaBkQoIY/bzip2-1.0.5-7.el6_0.src.rpm)
Config(dist-ncs-build-41-141) 0 minutes 1 seconds
INFO: Results and/or logs in: /var/lib/mock/dist-ncs-build-41-141/result
ERROR: Command failed. See logs for output.
# ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
--nodeps builddir/build/SPECS/bzip2.spec']

​​
Build.log looks as follows

Executing command: ['bash', '--login', '-c', 'rpmbuild -bs
--target x86_64 --nodeps builddir/build/SPECS/bzip2.spec'] with env {'LANG':
'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
'/bin/bash', 'HOSTNAME': 'mock', 'PROMPT_COMMAND':
'echo -n "<mock-chroot>"', 'HOME': '/builddir',
'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
bash: rpmbuild: command not found
Child return code was: 127
EXCEPTION: Command failed. See logs for output.
# ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
--nodeps builddir/build/SPECS/bzip2.spec']
Traceback (most recent call last):
  File "/usr/lib/python2.6/site-packages/mockbuild/trace_decorator.py", line 70,
in trace
    result = func(*args, **kw)
  File "/usr/lib/python2.6/site-packages/mockbuild/util.py", line 359, in do
    raise mockbuild.exception.Error, ("Command failed. See logs for output.\n #
%s" % (command,), child.returncode)
Error: Command failed. See logs for output.
# ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
--nodeps builddir/build/SPECS/bzip2.spec']
LEAVE do --> EXCEPTION RAISED

I have performed all the steps need to execute rpmbuild as a non-root user. Still nothing
works.

Any suggestions?

Thanks,
Radha.



From:
[e-mail]<mailto:[e-mail]>
[mailto:[e-mail]<mailto:[e-mail]>]
On Behalf Of Vijay N. Majagaonkar
Sent: Friday, September 06, 2013 4:54 PM
To: Discussion of Fedora build system
Subject: Re: ERROR: Could not find useradd in chroot, maybe the install failed? in
mock_output.log

Check where those package available for download, you can see under repo, pkglist file
should contain those package.

FAILED: BuildError: error building package (arch x86_64), mock exited with status 127

[Mike Bonnet]

On 9/10/13 12:31 PM, Radha Venkatesh (radvenka) wrote:
>  Thank you. I resolved the below issue by using add-pkg and
> add-group-pkg.
>
>  Still peeling the onion. Finally I have got to the stage where this
>  error occurs:
>
>  koji build --scratch dist-ncs
>  packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm
>
>  Uploading srpm: packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm
>
>  [====================================] 100% 00:00:00 835.37 KiB   4.70
>  MiB/sec
>
>  Created task: 711
>
>  Task info: http://vos-cm20/koji/taskinfo?taskID=711
>
>  Watching tasks (this may be safely interrupted)...
>
>  711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free
>
>  711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free -> open (kojid-1)
>
>     712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free
>
>     712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free -> open
>  (kojid-1)
>
>     712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): open (kojid-1)
>  -> FAILED: BuildError: error building package (arch x86_64), mock exited
>  with status 127; see root.log for more information
>
>     0 free  1 open  0 done  1 failed
>
>  711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): open (kojid-1) ->
>  FAILED: BuildError: error building package (arch x86_64), mock exited
>  with status 127; see root.log for more information
>
>     0 free  0 open  0 done  2 failed
>
>  711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm) failed
>
>  mock_output looks like this
>
>  ERROR:
>
> Exception(/tmp/koji/tasks/712/712/local/work/cli-build/1378840333.7562611.yaBkQoIY/bzip2-1.0.5-7.el6_0.src.rpm)
>  Config(dist-ncs-build-41-141) 0 minutes 1 seconds
>
>  INFO: Results and/or logs in: /var/lib/mock/dist-ncs-build-41-141/result
>
>  ERROR: Command failed. See logs for output.
>
>  # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
> --nodeps
>  builddir/build/SPECS/bzip2.spec']
>
>  Build.log looks as follows
>
>  Executing command: ['bash', '--login', '-c', 'rpmbuild -bs
> --target
>  x86_64 --nodeps builddir/build/SPECS/bzip2.spec'] with env {'LANG':
>  'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
> '/bin/bash', 'HOSTNAME':
>  'mock', 'PROMPT_COMMAND': 'echo -n
> "<mock-chroot>"', 'HOME':
>  '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
>
>  bash: rpmbuild: command not found
>
>  Child return code was: 127
>
>  EXCEPTION: Command failed. See logs for output.
>
>  # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
> --nodeps
>  builddir/build/SPECS/bzip2.spec']
>
>  Traceback (most recent call last):
>
>     File "/usr/lib/python2.6/site-packages/mockbuild/trace_decorator.py",
>  line 70, in trace
>
>       result = func(*args, **kw)
>
>     File "/usr/lib/python2.6/site-packages/mockbuild/util.py", line 359,
>  in do
>
>       raise mockbuild.exception.Error, ("Command failed. See logs for
>  output.\n # %s" % (command,), child.returncode)
>
>  Error: Command failed. See logs for output.
>
>  # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
> --nodeps
>  builddir/build/SPECS/bzip2.spec']
>
>  LEAVE do --> EXCEPTION RAISED
>
>  I have performed all the steps need to execute rpmbuild as a non-root
>  user. Still nothing works.
>
>  Any suggestions? 
That means the rpmbuild command is not available in the chroot that Koji 
is creating for the build.  You should run:

koji add-group-pkg dist-ncs-build build rpm-build

which causes the rpm-build package to be included as part of the "build" 
comps group for the dist-ncs-build tag.  The "build" comps group is what 
is used to populate the chroots used to perform builds.

>  Thanks,
>
>  Radha.
>
>  *From:*[e-mail]
>  [mailto:[e-mail]] *On Behalf Of *Vijay
>  N. Majagaonkar
>  *Sent:* Friday, September 06, 2013 4:54 PM
>  *To:* Discussion of Fedora build system
>  *Subject:* Re: ERROR: Could not find useradd in chroot, maybe the
>  install failed? in mock_output.log
>
>  Check where those package available for download, you can see under
>  repo, pkglist file should contain those package.
>
>  On Fri, Sep 6, 2013 at 4:33 PM, Radha Venkatesh (radvenka)
>  <radvenka(a)cisco.com <mailto:[e-mail]>> wrote:
>
>  Any inputs?
>
>  *From:*[e-mail]
>  <mailto:[e-mail]>
>  [mailto:[e-mail]
>  <mailto:[e-mail]>] *On Behalf Of *Radha
>  Venkatesh (radvenka)
>  *Sent:* Friday, September 06, 2013 10:49 AM
>
>
>  *To:* Discussion of Fedora build system
>
>  *Subject:* RE: ERROR: Could not find useradd in chroot, maybe the
>  install failed? in mock_output.log
>
>  I have done that already. For libk5crypto.so, I have imported
>
>  [kojiadmin@vos-cm20 root]$ koji import
>  /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_
>
>  64.rpm
>
>  uploading
>  /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm... done
>
>  importing
>  /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm... done
>
>  [kojiadmin@vos-cm20 root]$ koji import
>  /auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm
>
>  RPM already imported:
>  /auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm
>
>  Skipping import
>
>  But the error still persists.
>
>  *From:*[e-mail]
>  <mailto:[e-mail]>
>  [mailto:[e-mail]
>  <mailto:[e-mail]>] *On Behalf Of *Vijay
>  N. Majagaonkar
>  *Sent:* Friday, September 06, 2013 10:24 AM
>  *To:* Discussion of Fedora build system
>  *Subject:* Re: ERROR: Could not find useradd in chroot, maybe the
>  install failed? in mock_output.log
>
>
>      DEBUG util.py:264:  Error: Package: libcurl-7.19.7-35.el6.x86_64 (build)
>      DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
>
>  ​yum provides '*/libk5crypto.so' ​
>
>      DEBUG util.py:264:  Error: Package: openssl-1.0.0-27.el6.x86_64 (build)
>      DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
>      DEBUG util.py:264:  Error: Package: sed-4.2.1-10.el6.x86_64 (build)
>      DEBUG util.py:264:             Requires: /sbin/install-info
>
>  ​​yum provides '*/install-info' ​​
>
>  ​Yum provides gives you package name and import that package into koji,
>  that should fix problem of missing package.​
>
>
>  --
>  buildsys mailing list
>  buildsys(a)lists.fedoraproject.org <mailto:[e-mail]>
>  https://admin.fedoraproject.org/mailman/listinfo/buildsys
>
>
>
>  --
>  buildsys mailing list
>  buildsys(a)lists.fedoraproject.org
>  https://admin.fedoraproject.org/mailman/listinfo/buildsys
>

FAILED: BuildError: error building package (arch x86_64), mock exited with status 127

[Radha Venkatesh (radvenka)]

Thank you! I was finally able to build a src rpm.

I went through the help for koji and I find that I am able to build only 1 src rpm at a
time (I do not have an external repo).

Is there any way to specify multiple src rpms in "koji build" ?

Thanks,
Radha

-----Original Message-----
From: buildsys-bounces(a)lists.fedoraproject.org
[mailto:[e-mail]] On Behalf Of Mike Bonnet
Sent: Tuesday, September 10, 2013 1:21 PM
To: buildsys(a)lists.fedoraproject.org
Subject: Re: FAILED: BuildError: error building package (arch x86_64), mock exited with
status 127

On 9/10/13 12:31 PM, Radha Venkatesh (radvenka) wrote:
>  Thank you. I resolved the below issue by using add-pkg and
> add-group-pkg.
>
>  Still peeling the onion. Finally I have got to the stage where this
>  error occurs:
>
>  koji build --scratch dist-ncs
>  packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm
>
>  Uploading srpm: packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm
>
>  [====================================] 100% 00:00:00 835.37 KiB   4.70
>  MiB/sec
>
>  Created task: 711
>
>  Task info: http://vos-cm20/koji/taskinfo?taskID=711
>
>  Watching tasks (this may be safely interrupted)...
>
>  711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free
>
>  711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free -> open (kojid-1)
>
>     712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free
>
>     712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free -> open
>  (kojid-1)
>
>     712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): open (kojid-1)
>  -> FAILED: BuildError: error building package (arch x86_64), mock exited
>  with status 127; see root.log for more information
>
>     0 free  1 open  0 done  1 failed
>
>  711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): open (kojid-1) ->
>  FAILED: BuildError: error building package (arch x86_64), mock exited
>  with status 127; see root.log for more information
>
>     0 free  0 open  0 done  2 failed
>
>  711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm) failed
>
>  mock_output looks like this
>
>  ERROR:
>
> Exception(/tmp/koji/tasks/712/712/local/work/cli-build/1378840333.7562611.yaBkQoIY/bzip2-1.0.5-7.el6_0.src.rpm)
>  Config(dist-ncs-build-41-141) 0 minutes 1 seconds
>
>  INFO: Results and/or logs in: /var/lib/mock/dist-ncs-build-41-141/result
>
>  ERROR: Command failed. See logs for output.
>
>  # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
> --nodeps
>  builddir/build/SPECS/bzip2.spec']
>
>  Build.log looks as follows
>
>  Executing command: ['bash', '--login', '-c', 'rpmbuild -bs
> --target
>  x86_64 --nodeps builddir/build/SPECS/bzip2.spec'] with env {'LANG':
>  'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
> '/bin/bash', 'HOSTNAME':
>  'mock', 'PROMPT_COMMAND': 'echo -n
> "<mock-chroot>"', 'HOME':
>  '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
>
>  bash: rpmbuild: command not found
>
>  Child return code was: 127
>
>  EXCEPTION: Command failed. See logs for output.
>
>  # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
> --nodeps
>  builddir/build/SPECS/bzip2.spec']
>
>  Traceback (most recent call last):
>
>     File "/usr/lib/python2.6/site-packages/mockbuild/trace_decorator.py",
>  line 70, in trace
>
>       result = func(*args, **kw)
>
>     File "/usr/lib/python2.6/site-packages/mockbuild/util.py", line 359,
>  in do
>
>       raise mockbuild.exception.Error, ("Command failed. See logs for
>  output.\n # %s" % (command,), child.returncode)
>
>  Error: Command failed. See logs for output.
>
>  # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
> --nodeps
>  builddir/build/SPECS/bzip2.spec']
>
>  LEAVE do --> EXCEPTION RAISED
>
>  I have performed all the steps need to execute rpmbuild as a non-root
>  user. Still nothing works.
>
>  Any suggestions?
>  
That means the rpmbuild command is not available in the chroot that Koji 
is creating for the build.  You should run:

koji add-group-pkg dist-ncs-build build rpm-build

which causes the rpm-build package to be included as part of the "build" 
comps group for the dist-ncs-build tag.  The "build" comps group is what 
is used to populate the chroots used to perform builds.

>  Thanks,
>
>  Radha.
>
>  *From:*[e-mail]
>  [mailto:[e-mail]] *On Behalf Of *Vijay
>  N. Majagaonkar
>  *Sent:* Friday, September 06, 2013 4:54 PM
>  *To:* Discussion of Fedora build system
>  *Subject:* Re: ERROR: Could not find useradd in chroot, maybe the
>  install failed? in mock_output.log
>
>  Check where those package available for download, you can see under
>  repo, pkglist file should contain those package.
>
>  On Fri, Sep 6, 2013 at 4:33 PM, Radha Venkatesh (radvenka)
>  <radvenka(a)cisco.com <mailto:[e-mail]>> wrote:
>
>  Any inputs?
>
>  *From:*[e-mail]
>  <mailto:[e-mail]>
>  [mailto:[e-mail]
>  <mailto:[e-mail]>] *On Behalf Of *Radha
>  Venkatesh (radvenka)
>  *Sent:* Friday, September 06, 2013 10:49 AM
>
>
>  *To:* Discussion of Fedora build system
>
>  *Subject:* RE: ERROR: Could not find useradd in chroot, maybe the
>  install failed? in mock_output.log
>
>  I have done that already. For libk5crypto.so, I have imported
>
>  [kojiadmin@vos-cm20 root]$ koji import
>  /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_
>
>  64.rpm
>
>  uploading
>  /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm... done
>
>  importing
>  /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm... done
>
>  [kojiadmin@vos-cm20 root]$ koji import
>  /auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm
>
>  RPM already imported:
>  /auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm
>
>  Skipping import
>
>  But the error still persists.
>
>  *From:*[e-mail]
>  <mailto:[e-mail]>
>  [mailto:[e-mail]
>  <mailto:[e-mail]>] *On Behalf Of *Vijay
>  N. Majagaonkar
>  *Sent:* Friday, September 06, 2013 10:24 AM
>  *To:* Discussion of Fedora build system
>  *Subject:* Re: ERROR: Could not find useradd in chroot, maybe the
>  install failed? in mock_output.log
>
>
>      DEBUG util.py:264:  Error: Package: libcurl-7.19.7-35.el6.x86_64 (build)
>      DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
>
>  ​yum provides '*/libk5crypto.so' ​
>
>      DEBUG util.py:264:  Error: Package: openssl-1.0.0-27.el6.x86_64 (build)
>      DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
>      DEBUG util.py:264:  Error: Package: sed-4.2.1-10.el6.x86_64 (build)
>      DEBUG util.py:264:             Requires: /sbin/install-info
>
>  ​​yum provides '*/install-info' ​​
>
>  ​Yum provides gives you package name and import that package into koji,
>  that should fix problem of missing package.​
>
>
>  --
>  buildsys mailing list
>  buildsys(a)lists.fedoraproject.org <mailto:[e-mail]>
>  https://admin.fedoraproject.org/mailman/listinfo/buildsys
>
>
>
>  --
>  buildsys mailing list
>  buildsys(a)lists.fedoraproject.org
>  https://admin.fedoraproject.org/mailman/listinfo/buildsys
>
>  
--
buildsys mailing list
buildsys(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/buildsys

FAILED: BuildError: error building package (arch x86_64), mock exited with status 127

[Mike Bonnet]

On 9/10/13 3:42 PM, Radha Venkatesh (radvenka) wrote:
>  Thank you! I was finally able to build a src rpm.
>
>  I went through the help for koji and I find that I am able to build only 1 src rpm at a
> time (I do not have an external repo).
>
>  Is there any way to specify multiple src rpms in "koji build" ? 
Koji is designed to build each srpm/package separately.  You can launch 
as many "koji build" commands at the same time as you want (see the 
--nowait option) and they will be processed in parallel, based on the 
number of builders you have and the capacity of those builders.

>  Thanks,
>  Radha
>
>  -----Original Message-----
>  From: buildsys-bounces(a)lists.fedoraproject.org
> [mailto:[e-mail]] On Behalf Of Mike Bonnet
>  Sent: Tuesday, September 10, 2013 1:21 PM
>  To: buildsys(a)lists.fedoraproject.org
>  Subject: Re: FAILED: BuildError: error building package (arch x86_64), mock exited with
> status 127
>
>  On 9/10/13 12:31 PM, Radha Venkatesh (radvenka) wrote:
> > Thank you. I resolved the below issue by using add-pkg and add-group-pkg.
> >
> > Still peeling the onion. Finally I have got to the stage where this
> > error occurs:
> >
> > koji build --scratch dist-ncs
> > packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm
> >
> > Uploading srpm: packages/bzip2/1.0.5/7.el6_0/src/bzip2-1.0.5-7.el6_0.src.rpm
> >
> > [====================================] 100% 00:00:00 835.37 KiB   4.70
> > MiB/sec
> >
> > Created task: 711
> >
> > Task info: http://vos-cm20/koji/taskinfo?taskID=711
> >
> > Watching tasks (this may be safely interrupted)...
> >
> > 711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free
> >
> > 711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): free -> open (kojid-1)
> >
> >     712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free
> >
> >     712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): free -> open
> > (kojid-1)
> >
> >     712 buildArch (bzip2-1.0.5-7.el6_0.src.rpm, x86_64): open (kojid-1)
> > -> FAILED: BuildError: error building package (arch x86_64), mock exited
> > with status 127; see root.log for more information
> >
> >     0 free  1 open  0 done  1 failed
> >
> > 711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm): open (kojid-1) ->
> > FAILED: BuildError: error building package (arch x86_64), mock exited
> > with status 127; see root.log for more information
> >
> >     0 free  0 open  0 done  2 failed
> >
> > 711 build (dist-ncs, bzip2-1.0.5-7.el6_0.src.rpm) failed
> >
> > mock_output looks like this
> >
> > ERROR:
> >
> Exception(/tmp/koji/tasks/712/712/local/work/cli-build/1378840333.7562611.yaBkQoIY/bzip2-1.0.5-7.el6_0.src.rpm)
> > Config(dist-ncs-build-41-141) 0 minutes 1 seconds
> >
> > INFO: Results and/or logs in: /var/lib/mock/dist-ncs-build-41-141/result
> >
> > ERROR: Command failed. See logs for output.
> >
> > # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
> --nodeps
> > builddir/build/SPECS/bzip2.spec']
> >
> > Build.log looks as follows
> >
> > Executing command: ['bash', '--login', '-c', 'rpmbuild
> -bs --target
> > x86_64 --nodeps builddir/build/SPECS/bzip2.spec'] with env {'LANG':
> > 'en_US.UTF-8', 'TERM': 'vt100', 'SHELL':
> '/bin/bash', 'HOSTNAME':
> > 'mock', 'PROMPT_COMMAND': 'echo -n
> "<mock-chroot>"', 'HOME':
> > '/builddir', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin'}
> >
> > bash: rpmbuild: command not found
> >
> > Child return code was: 127
> >
> > EXCEPTION: Command failed. See logs for output.
> >
> > # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
> --nodeps
> > builddir/build/SPECS/bzip2.spec']
> >
> > Traceback (most recent call last):
> >
> >     File "/usr/lib/python2.6/site-packages/mockbuild/trace_decorator.py",
> > line 70, in trace
> >
> >       result = func(*args, **kw)
> >
> >     File "/usr/lib/python2.6/site-packages/mockbuild/util.py", line 359,
> > in do
> >
> >       raise mockbuild.exception.Error, ("Command failed. See logs for
> > output.\n # %s" % (command,), child.returncode)
> >
> > Error: Command failed. See logs for output.
> >
> > # ['bash', '--login', '-c', 'rpmbuild -bs --target x86_64
> --nodeps
> > builddir/build/SPECS/bzip2.spec']
> >
> > LEAVE do --> EXCEPTION RAISED
> >
> > I have performed all the steps need to execute rpmbuild as a non-root
> > user. Still nothing works.
> >
> > Any suggestions?
>
>  That means the rpmbuild command is not available in the chroot that Koji
>  is creating for the build.  You should run:
>
>  koji add-group-pkg dist-ncs-build build rpm-build
>
>  which causes the rpm-build package to be included as part of the "build"
>  comps group for the dist-ncs-build tag.  The "build" comps group is what
>  is used to populate the chroots used to perform builds.
>
> > Thanks,
> >
> > Radha.
> >
> > *From:*[e-mail]
> > [mailto:[e-mail]] *On Behalf Of *Vijay
> > N. Majagaonkar
> > *Sent:* Friday, September 06, 2013 4:54 PM
> > *To:* Discussion of Fedora build system
> > *Subject:* Re: ERROR: Could not find useradd in chroot, maybe the
> > install failed? in mock_output.log
> >
> > Check where those package available for download, you can see under
> > repo, pkglist file should contain those package.
> >
> > On Fri, Sep 6, 2013 at 4:33 PM, Radha Venkatesh (radvenka)
> > <radvenka(a)cisco.com <mailto:[e-mail]>> wrote:
> >
> > Any inputs?
> >
> > *From:*[e-mail]
> > <mailto:[e-mail]>
> > [mailto:[e-mail]
> > <mailto:[e-mail]>] *On Behalf Of *Radha
> > Venkatesh (radvenka)
> > *Sent:* Friday, September 06, 2013 10:49 AM
> >
> >
> > *To:* Discussion of Fedora build system
> >
> > *Subject:* RE: ERROR: Could not find useradd in chroot, maybe the
> > install failed? in mock_output.log
> >
> > I have done that already. For libk5crypto.so, I have imported
> >
> > [kojiadmin@vos-cm20 root]$ koji import
> > /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_
> >
> > 64.rpm
> >
> > uploading
> > /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm... done
> >
> > importing
> > /auto/tps/centos/6/x86_64/Packages/krb5-devel-1.10.3-10.el6.x86_64.rpm... done
> >
> > [kojiadmin@vos-cm20 root]$ koji import
> > /auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm
> >
> > RPM already imported:
> > /auto/tps/centos/6/x86_64/Packages/krb5-libs-1.10.3-10.el6.x86_64.rpm
> >
> > Skipping import
> >
> > But the error still persists.
> >
> > *From:*[e-mail]
> > <mailto:[e-mail]>
> > [mailto:[e-mail]
> > <mailto:[e-mail]>] *On Behalf Of *Vijay
> > N. Majagaonkar
> > *Sent:* Friday, September 06, 2013 10:24 AM
> > *To:* Discussion of Fedora build system
> > *Subject:* Re: ERROR: Could not find useradd in chroot, maybe the
> > install failed? in mock_output.log
> >
> >
> >      DEBUG util.py:264:  Error: Package: libcurl-7.19.7-35.el6.x86_64 (build)
> >      DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
> >
> > ​yum provides '*/libk5crypto.so' ​
> >
> >      DEBUG util.py:264:  Error: Package: openssl-1.0.0-27.el6.x86_64 (build)
> >      DEBUG util.py:264:             Requires: libk5crypto.so.3()(64bit)
> >      DEBUG util.py:264:  Error: Package: sed-4.2.1-10.el6.x86_64 (build)
> >      DEBUG util.py:264:             Requires: /sbin/install-info
> >
> > ​​yum provides '*/install-info' ​​
> >
> > ​Yum provides gives you package name and import that package into koji,
> > that should fix problem of missing package.​
> >
> >
> > --
> > buildsys mailing list
> > buildsys(a)lists.fedoraproject.org <mailto:[e-mail]>
> > https://admin.fedoraproject.org/mailman/listinfo/buildsys
> >
> >
> >
> > --
> > buildsys mailing list
> > buildsys(a)lists.fedoraproject.org
> > https://admin.fedoraproject.org/mailman/listinfo/buildsys
> >
>
>  --
>  buildsys mailing list
>  buildsys(a)lists.fedoraproject.org
>  https://admin.fedoraproject.org/mailman/listinfo/buildsys
>  --
>  buildsys mailing list
>  buildsys(a)lists.fedoraproject.org
>  https://admin.fedoraproject.org/mailman/listinfo/buildsys
>

[Vijay N. Majagaonkar]

*koji list-groups dist-ncp-build*

Are you using this tag in your mock config? what is your latest root.log
shows?

;),
im.viji

*Every living being has a potential to become God.*


On Wed, Sep 4, 2013 at 12:17 PM, Radha Venkatesh (radvenka) <
radvenka(a)cisco.com&gt; wrote:

>   I have set up a koji build system and on running a scratch build
> (*koji
>  build --scratch dist-ncp bzip2-1.0.5-7.el6_0.src.rpm)*, I see the below
>  error in mock_output.log. All the source rpms have been imported into the
>  build server.**
>
>  ** **
>
>  INFO: mock.py version 1.1.32 starting...****
>
>  Start: init plugins****
>
>  INFO: selinux enabled****
>
>  Finish: init plugins****
>
>  Start: run****
>
>  Start: lock buildroot****
>
>  Start: clean chroot****
>
>  Finish: clean chroot****
>
>  Finish: lock buildroot****
>
>  Start: chroot init****
>
>  Start: lock buildroot****
>
>  Mock Version: 1.1.32****
>
>  INFO: Mock Version: 1.1.32****
>
>  INFO: calling preinit hooks****
>
>  Start: device setup****
>
>  Finish: device setup****
>
>  Start: yum update****
>
>  Start: Outputting list of available packages****
>
>  Finish: Outputting list of available packages****
>
>  Finish: yum update****
>
>  ERROR: Could not find useradd in chroot, maybe the install failed?****
>
>  ** **
>
>  ​​
>  Here are the packages I have added to the group****
>
>  ** **
>
>  *koji list-groups dist-ncp-build*
>
>    bash: None, default  [dist-ncp-build]****
>
>    bzip2: None, default  [dist-ncp- build]****
>
>    coreutils: None, default  [dist-ncp-build]****
>
>    cpio: None, default  [dist-ncp-build]****
>
>    cvs: None, default  [dist-ncp-build]****
>
>    diffutils: None, default  [dist-ncp-build]****
>
>    fedora-release: None, default  [dist-ncp-build]****
>
>    findutils: None, default  [dist-ncp-build]****
>
>    gawk: None, default  [dist-ncp-build]****
>
>    gcc: None, default  [dist-ncp-build]****
>
>    gcc-c++: None, default  [dist-ncp-build]****
>
>    gnupg: None, default  [dist-ncp-build]****
>
>    grep: None, default  [dist-ncp-build]****
>
>    gzip: None, default  [dist-ncp-build]****
>
>    info: None, default  [dist-ncp-build]****
>
>    make: None, default  [dist-ncp-build]****
>
>    patch: None, default  [dist-ncp-build]****
>
>    redhat-rpm-config: None, default  [dist-ncp-build]****
>
>    rpm-build: None, default  [dist-ncp-build]****
>
>    rpmdevtools: None, default  [dist-ncp-build]****
>
>    sed: None, default  [dist-ncp-build]****
>
>    shadow-utils: None, default  [dist-ncp-build]****
>
>    tar: None, default  [dist-ncp-build]****
>
>    unzip: None, default  [dist-ncp-build]****
>
>    utils-linux-ng: None, default  [dist-ncp-build]****
>
>    wget: None, default  [dist-ncp-build]****
>
>    which: None, default  [dist-ncp-build]****
>
>  ** **
>
>  What am I missing?****
>
>  ** **
>
>  Thanks,****
>
>  Radha.****
>
>  ** **
>
>  ** **
>
>  ** **
>
>  ** **
>
>  --
>  buildsys mailing list
>  buildsys(a)lists.fedoraproject.org
>  https://admin.fedoraproject.org/mailman/listinfo/buildsys
>

[Vijay N. Majagaonkar]

On Thu, Sep 5, 2013 at 5:32 PM, Vijay N. Majagaonkar <
vijay.majagaonkar(a)gmail.com&gt; wrote:

>   *koji list-groups dist-ncp-build*
>  
**
>  Are you using this tag in your mock config? what is your latest root.log
>  shows?
>  
​I was pointing to ncp-build tag, where you added all packages to this
group and this tag is used for group install.​
​​

>  ;),
>  im.viji
>
>  *Every living being has a potential to become God.*
>
>
>  On Wed, Sep 4, 2013 at 12:17 PM, Radha Venkatesh (radvenka) <
>  radvenka(a)cisco.com&gt; wrote:
>
> >  I have set up a koji build system and on running a scratch build (*koji
> > build --scratch dist-ncp bzip2-1.0.5-7.el6_0.src.rpm)*, I see the below
> > error in mock_output.log. All the source rpms have been imported into the
> > build server.**
> >
> > ** **
> >
> > INFO: mock.py version 1.1.32 starting...****
> >
> > Start: init plugins****
> >
> > INFO: selinux enabled****
> >
> > Finish: init plugins****
> >
> > Start: run****
> >
> > Start: lock buildroot****
> >
> > Start: clean chroot****
> >
> > Finish: clean chroot****
> >
> > Finish: lock buildroot****
> >
> > Start: chroot init****
> >
> > Start: lock buildroot****
> >
> > Mock Version: 1.1.32****
> >
> > INFO: Mock Version: 1.1.32****
> >
> > INFO: calling preinit hooks****
> >
> > Start: device setup****
> >
> > Finish: device setup****
> >
> > Start: yum update****
> >
> > Start: Outputting list of available packages****
> >
> > Finish: Outputting list of available packages****
> >
> > Finish: yum update****
> >
> > ERROR: Could not find useradd in chroot, maybe the install failed?****
> >
> > ** **
> >
> > ​​
> > Here are the packages I have added to the group****
> >
> > ** **
> >
> > *koji list-groups dist-ncp-build*
> >
> >   bash: None, default  [dist-ncp-build]****
> >
> >   bzip2: None, default  [dist-ncp- build]****
> >
> >   coreutils: None, default  [dist-ncp-build]****
> >
> >   cpio: None, default  [dist-ncp-build]****
> >
> >   cvs: None, default  [dist-ncp-build]****
> >
> >   diffutils: None, default  [dist-ncp-build]****
> >
> >   fedora-release: None, default  [dist-ncp-build]****
> >
> >   findutils: None, default  [dist-ncp-build]****
> >
> >   gawk: None, default  [dist-ncp-build]****
> >
> >   gcc: None, default  [dist-ncp-build]****
> >
> >   gcc-c++: None, default  [dist-ncp-build]****
> >
> >   gnupg: None, default  [dist-ncp-build]****
> >
> >   grep: None, default  [dist-ncp-build]****
> >
> >   gzip: None, default  [dist-ncp-build]****
> >
> >   info: None, default  [dist-ncp-build]****
> >
> >   make: None, default  [dist-ncp-build]****
> >
> >   patch: None, default  [dist-ncp-build]****
> >
> >   redhat-rpm-config: None, default  [dist-ncp-build]****
> >
> >   rpm-build: None, default  [dist-ncp-build]****
> >
> >   rpmdevtools: None, default  [dist-ncp-build]****
> >
> >   sed: None, default  [dist-ncp-build]****
> >
> >   shadow-utils: None, default  [dist-ncp-build]****
> >
> >   tar: None, default  [dist-ncp-build]****
> >
> >   unzip: None, default  [dist-ncp-build]****
> >
> >   utils-linux-ng: None, default  [dist-ncp-build]****
> >
> >   wget: None, default  [dist-ncp-build]****
> >
> >   which: None, default  [dist-ncp-build]****
> >
> > ** **
> >
> > What am I missing?****
> >
> > ** **
> >
> > Thanks,****
> >
> > Radha.****
> >
> > ** **
> >
> > ** **
> >
> > ** **
> >
> > ** **
> >
> > --
> > buildsys mailing list
> > buildsys(a)lists.fedoraproject.org
> > https://admin.fedoraproject.org/mailman/listinfo/buildsys
> >
>
>