我发现执行“ fdisk /dev/sda1" 出现 下面的信息:
[root@camlit ~]# fdisk /dev/sda1
Command (m for help): p
Disk /dev/sda1: 3654 MB, 3654287360 bytes
255 heads, 63 sectors/track, 444 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x69205244
This doesn't look like a partition table
Probably you selected the wrong device.
Device Boot Start End Blocks Id System
/dev/sda1p1 ? 13578 119522 850995205 72 Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(368, 111, 45) logical=(13577, 238, 11)
Partition 1 has different physical/logical endings:
phys=(371, 101, 51) logical=(119521, 238, 60)
Partition 1 does not end on cylinder boundary.
/dev/sda1p2 ? 45382 79243 271987362 74 Unknown
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(67, 115, 32) logical=(45381, 70, 3)
Partition 2 has different physical/logical endings:
phys=(299, 114, 44) logical=(79242, 34, 29)
Partition 2 does not end on cylinder boundary.
/dev/sda1p3 ? 10499 10499 0 65 Novell Netware 386
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(114, 111, 32) logical=(10498, 56, 41)
Partition 3 has different physical/logical endings:
phys=(353, 115, 52) logical=(10498, 56, 40)
Partition 3 does not end on cylinder boundary.
/dev/sda1p4 167628 167631 25817+ 0 Empty
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(0, 0, 0) logical=(167627, 190, 52)
Partition 4 has different physical/logical endings:
phys=(0, 0, 0) logical=(167630, 245, 26)
Partition 4 does not end on cylinder boundary.
Partition table entries are not in disk order
这是怎么回事阿? 望大虾们给解释下,谢谢..
2010/3/23 Y L <upon72(a)gmail.com>
你的boot分区是独立的分区,其余的比如根分区/、/home、/usr分区等等都是在逻辑卷(LVM)里面吧,所以你可以把/dev/sda1和/dev/sda5格式化为逻辑卷,然后把它们加入到逻辑卷组里,再分配给/home分区,这样Linux可用的磁盘就多了。
在 2010年3月23日 下午7:03,sync <jiannma(a)gmail.xn--com>:-0s6m5392c
你的意思是说对/dev/sda1 进行格式化?
>
> 2010/3/23 Y L <upon72(a)gmail.com>
>
> 我想你应该把你的C盘也格式化成LVM(系统|管理|逻辑卷管理器),然后就可以加入到你的Linux里了。
>>
>> 在 2010年3月23日 下午5:16,sync <jiannma(a)gmail.xn--com>:-0s6m5392c
>>
>>> hi ,all :
>>>
>>> 我在安装fedora 12时候出现了下面的问题:
>>>
>>> 机器环境如下:
>>>
>>> 本机40G硬盘, 由于没有DVD光驱,所以先装了个XP, 然后通过XP再装了Fedora,
>>> 在选择分区的时候,我选择的是缩减XP的空间大小的那项,其他的都默认安装,
>>> 安装好后出现的分区如下:
>>>
>>>
>>> [root@camlit Downloads]# fdisk -l
>>>
>>> Disk /dev/sda: 40.0 GB, 40007761920 bytes
>>> 255 heads, 63 sectors/track, 4864 cylinders
>>> Units = cylinders of 16065 * 512 = 8225280 bytes
>>> Disk identifier: 0xfa585056
>>>
>>> Device Boot Start End Blocks Id System
>>> /dev/sda1 1 445 3568640 7 HPFS/NTFS
>>> Partition 1 does not end on cylinder boundary.
>>> /dev/sda2 2550 4864 18582480 f W95 Ext'd (LBA)
>>> Partition 2 does not end on cylinder boundary.
>>> /dev/sda3 * 445 470 204800 83 Linux
>>> Partition 3 does not end on cylinder boundary.
>>> /dev/sda4 470 2550 16706560 8e Linux LVM
>>> /dev/sda5 2550 4864 18582448+ b W95 FAT32
>>>
>>> Partition table entries are not in disk order
>>>
>>> Disk /dev/dm-0: 16.0 GB, 16030629888 bytes
>>> 255 heads, 63 sectors/track, 1948 cylinders
>>> Units = cylinders of 16065 * 512 = 8225280 bytes
>>> Disk identifier: 0x00000000
>>>
>>> Disk /dev/dm-0 doesn't contain a valid partition table
>>>
>>> Disk /dev/dm-1: 1073 MB, 1073741824 bytes
>>> 255 heads, 63 sectors/track, 130 cylinders
>>> Units = cylinders of 16065 * 512 = 8225280 bytes
>>> Disk identifier: 0x00000000
>>>
>>> Disk /dev/dm-1 doesn't contain a valid partition tab
>>>
>>>
>>> 看到/dev/dm-0有16G的空间, 我就想把它格式化掉,在格式化的时候,
>>> 却出现了:
>>> root @camlit ~> fdisk /dev/dm-0
>>> .....
>>> Command action
>>> e extended
>>> p primary partition (1-4)
>>> p
>>> Partition number (1-4): 1
>>> First cylinder (1-1948, default 1):
>>> Using default value 1
>>> Last cylinder, +cylinders or +size{K,M,G} (1-1948, default 1948 )
>>>
>>> 这里我选择默认但是还是报错。
>>>
>>> 由于现在安装好fedora后, 硬盘就 大概有 10G, 感觉太小了,
>>> 所以我想把windows那块格式化掉。
>>>
>>> 请教各位童鞋们,该怎么做呢?
>>>
>>> 谢谢~
>>> _______________________________________________
>>> Chinese mailing list
>>> Chinese at
lists.fedoraproject.org
>>>
https://admin.fedoraproject.org/mailman/listinfo/chinese
>>>
>>
>>
>