<ProtocolError for localhost:25151/cobbler_api: 404 Not Found>
by John Paget Bourke
Hi,
When I run
koan --list=profiles -s localhost
I get the following error
root@Config cobbler]# koan --list=profiles -s localhost
- looking for Cobbler at http://localhost:25151/cobbler_api
Traceback (most recent call last):
File "/usr/lib/python2.6/site-packages/koan/utils.py", line 542, in
__try_connect
xmlrpc_server.ping()
File "/usr/lib64/python2.6/xmlrpclib.py", line 1199, in __call__
return self.__send(self.__name, args)
File "/usr/lib64/python2.6/xmlrpclib.py", line 1489, in __request
verbose=self.__verbose
File "/usr/lib64/python2.6/xmlrpclib.py", line 1243, in request
headers
ProtocolError: <ProtocolError for localhost:25151/cobbler_api: 404 Not
Found>
If I try to see if the server is running and listening, the server is ok
[root@Config cobbler]# netstat -an | grep 25151
tcp 0 0 127.0.0.1:25151 0.0.0.0:*
LISTEN
tcp 0 0 127.0.0.1:25151 127.0.0.1:57483
TIME_WAIT
But returns nothing .
[root@Config cobbler]# curl http://localhost:25151/cobbler_api
curl: (52) Empty reply from server
I am using the web GUI and it works ok, no problems.
When I try to use koan or curl and check the logs
[root@Config cobbler]# curl http://localhost:25151/cobbler_api
curl: (52) Empty reply from server
[root@Config cobbler]# date
Sun Oct 30 05:30:55 UTC 2011
[root@Config cobbler]# ls -l
total 1792
drwxr-xr-x. 2 root root 4096 Oct 6 02:24 anamon
-rw-r--r--. 1 root root 1806499 Oct 30 04:50 cobbler.log
-rw-r--r-- 1 root root 73 Oct 29 00:24 install.log
drwxr-xr-x. 2 root root 4096 Oct 6 02:24 kicklog
drwxr-xr-x. 2 root root 4096 Oct 6 02:24 syslog
drwxr-xr-x. 2 root root 4096 Oct 30 04:40 tasks
[root@Config cobbler]# cd /etc/httpd/logs/
[root@Config logs]# ls -l
total 3172
-rw-r--r-- 1 root root 10904 Oct 30 04:45 access_log
-rw-r--r--. 1 root root 789779 Oct 30 02:43 access_log-20111030
-rw-r--r-- 1 root root 32638 Oct 30 05:20 error_log
-rw-r--r--. 1 root root 2403267 Oct 30 03:06 error_log-20111030
The logs do not seem to be affected.
The versions I am running are
[root@Config cobbler]# rpm -qa | grep cobbler
cobbler-2.2.1-1.el6.noarch
cobbler-web-2.2.1-1.el6.noarch
[root@Config cobbler]# rpm -qa | grep koan
koan-2.2.1-1.el6.noarch
In the modules.conf I have
[authentication]
#module = authn_denyall
module = authn_configfile
[authorization]
module = authz_allowall
So I am a bit lost. Any thoughts ?
Thanks
John
10 years, 2 months
Restoring an inherited value for a child profile?
by Zack Perry
I have a profile that is created using the command:
cobbler profile add --name=... --parent=...
The child profile's 'Template Files' attribute originally inherited
from its parent. For testing, I changed it using
cobbler profile edit --name=...
Once I was done, I thought that the defaults in the parent profile
were sufficient, so I wanted to restore the <<inherit>> value. But,
neither cobbler profile edit --help nor man cobbler offer any hints
how to do so. I tried the cobbler web UI as a last resort, no dice
either.
Yeah, I can cobbler profile remove --name=... to delete the modified
child profile and then recreate it. It's not that hard, but
conceptually it's uneconomical :-(
So the Q: is it possible to restore an inherited value for a profile
attribute? If so, what is the correct work flow?
Regards,
--Zack
10 years, 8 months
Re: [cobbler] cobbler 2.4.0 and problems booting Ubuntu 12.10 desktop 64bit
by Zack Perry
Hi James and Andrew,
Thanks for your two's follow-up. Looks like it's probably a good idea to file a bug report upstream to Ubuntu to Debian's Installation Team? Personally, I think what Ubuntu has done qualifies as a "bug".
> I played around with the 12.10 images today. I've been able to
> get past the error that you were hitting by using the netboot
> kernel and ramdisk. The desktop DVD also requires that you pull
> down the debian-intaller directory as well.
>
> The installation still fails as it goes to install the system.
> It ends up looking for a "live image" and since it's a netboot
> it can't find any. This only happens when netbooting and using
> a mirror that is simply a rsync of
> the DVD.
Yes. I got that one too!
> If you point the installation to a full mirror such as
> http://mirrors.kernel.org/ubuntu the installation goes through
> without issue. It looks like Ubuntu has changed the way that they
> are installing the system no matter whether you are using a server
> or desktop DVD.
>
> I'm stumped on whether or not there is any way to continue using
> the Ubuntu CDs for starting mirrors with cobbler.
>
>> That's interesting, it would be nice if they would be considerate
>>and push a DVD image instead that would work as expected.
>
> Yeah I totally agree. It did find a set of DVDs but they only
> contain the sources for the release which won't help us.
>
> Regards,
> Andrew
Gentlemen, please give me a few days. I still have a couple of ideas
to try out before we give up on Ubuntu 12.10 and later completely. I
have a couple of other ideas to try out. Will report back to the list.
Regards and have a great weekend,
-- Zack
10 years, 11 months
Only default distro kickstarting
by Janowiak, Edward
I got my first distro, CentOS 6.3, kickstarting systems very nicely. I added the RHEL 5u5 distro, profile, and simple kickstart template. Any systems I try to build off the RHEL 5u5 distro instead build the original CentOS 6.3. I've verified ksmeta for the distro and profile. The expanded kickstart looks good. I'm at a loss.
Thank you,
Edward
E-MAIL CONFIDENTIALITY NOTICE:
The contents of this e-mail message and any attachments are intended solely for the addressee(s) and may contain confidential and/or legally privileged information. If you are not the intended recipient of this message or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message and any attachments. If you are not the intended recipient, you are notified that any use, dissemination, distribution, copying, or storage of this message or any attachment is strictly prohibited.
10 years, 12 months
Newbie install problem
by Amnon Cohen
Hello,
I am having some problems installing Cobbler release24 on Scientific Linux
6.2
# make install
if [ -n "`getent passwd apache`" ] ; then \
python setup.py install -f; \
chown -R apache /usr/share/cobbler/web; \
else \
python setup.py install -f --install-layout=deb; \
chown -R www-data /usr/share/cobbler/web; \
fi
running install
running build
running build_py
building koan man page.
building cobbler man page.
building cobbler-register man page.
error: No such file or directory
chown: cannot access `/usr/share/cobbler/web': No such file or directory
make: *** [install] Error 1
[root@lab-r8-vm02 cobbler]# mkdir -p /usr/share/cobbler/web
[root@lab-r8-vm02 cobbler]# make install
if [ -n "`getent passwd apache`" ] ; then \
python setup.py install -f; \
chown -R apache /usr/share/cobbler/web; \
else \
python setup.py install -f --install-layout=deb; \
chown -R www-data /usr/share/cobbler/web; \
fi
running install
running build
running build_py
building koan man page.
building cobbler man page.
building cobbler-register man page.
error: No such file or directory
Was I doing something wrong?
Thanks,
Amnon
11 years
next-server?
by David Lee
Up-front confession: 2.0.11: yes, I know, old.
We have a well-established cobbler set-up for our machines (approaching 100). These are all installed over the same network from a server on that same network (say, "network-main"). So the cobbler configuration is a straightforward single network.
But we now wish to install a couple of client machines over a different network (say "network-alt") The cobbler server also has a port onto this network. So it should be possible to do this. But how?
I tried adding this new client to the cobbler server, and the network installation began. But it quickly paused, because it seems to be trying to mount the images over the original "network-main". (I was able to proceed, because it asked me to re-enter the details, so I was able to give it the server's address on "network-alt".)
But I'd like a cleaner solution. When Cobbler produces "/etc/dhcpd.conf", each host contains a "next-server" entry, which is, of course, on "network-main". So for my new client I tried using a "--server-override=..." giving the IP address of the cobbler server on "network-alt"). Firstly, it didn't like the syntax. Google suggested trying simple "--server" keyword. That looked OK and "cobbler system report" then showed "Server Override" to have the expected "network-alt" value. Looking good.
BUT... the contents of "/etc/dhcpd.conf" still show my new host to have "next-server" on the original, old "network-main". (Yes, I had remembered the "cobbler sync".)
What am I missing? (If there's a known bug about this issue in my old version 2.0.11, then fair enough, that's my problem.)
-- David Lee
11 years
how to use the field of status of cobbler web
by Shake Chen
Hi
I run cobbler 2.3.2, in cobbler system have field
status: production, development, testing, acceptance
by default is production.
I just want to know the field whether have Special purpose.
--
Shake Chen
11 years
Cobbler and ESXi 5.1 Builds
by Janowiak, Edward
I'm running 2.4.0 beta release 3 and keep getting the following error when trying to import ESXi 5.1:
cobbler import --path=/mnt --name=esxi51
task started: 2013-04-19_142955_import
task started (id=Media import, time=Fri Apr 19 14:29:55 2013)
Found a candidate signature: breed=vmware, version=esxi5
running: /usr/bin/file /var/www/cobbler/ks_mirror/esxi51/s.v00
received on stdout: /var/www/cobbler/ks_mirror/esxi51/s.v00: gzip compressed data, was "vmvisor-sys.tar.vtar", from Unix, last modified: Wed Aug 1 21:48:45 2012
received on stderr:
No signature matched in /var/www/cobbler/ks_mirror/esxi51
!!! TASK FAILED !!!
Is ESXi 5.1 supported in Cobbler?
E-MAIL CONFIDENTIALITY NOTICE:
The contents of this e-mail message and any attachments are intended solely for the addressee(s) and may contain confidential and/or legally privileged information. If you are not the intended recipient of this message or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message and any attachments. If you are not the intended recipient, you are notified that any use, dissemination, distribution, copying, or storage of this message or any attachment is strictly prohibited.
11 years
Mails from Cobbler
by Personal Técnico
Hi,
We're trying to configure Cobbler for sending an email when system has
been installed. I have read this post
http://www.mail-archive.com/cobbler@lists.fedorahosted.org/msg08546.html, but
our system continues not sending mail.
We do not have configured a local MTA in our cobbler server, but if we
send an email to our MTA (in other server), mail is sent OK.
Our kickstart file includes, at the end of the file, following lines:
[...]
# Enable post-install boot notification
$SNIPPET('post_anamon')
# Start final steps
$SNIPPET('kickstart_done')
# End final steps
But mail is not sent.
Why?
Thanks.
11 years
/etc/pki/product/* missing
by Simon Dwyer
Hi All,
anyone know why when i install RHEL 6.4 with cobbler it deletes the
/etc/pki/product/*.pem (or doesn't generate it at all?) so i cant
register with RH with subscription-manager?
I am running just the basic kickstart file.
Simon Dwyer
11 years
