Fedora Board, FAmSCo, FESCo Election Season, and Fedora Board Appointment.
by Robyn Bergeron
The nomination period for FAmSCo (Fedora Ambassador Steering Committee),
FESCo (Fedora Engineering Steering Committee), and the Fedora Board is
now open, and will close on November 13, 2012, at 23:59:59 UTC.
This election cycle will fill the following seats for a one-year period:
* Fedora Board: 2 elected seats, as well as 2 appointed seats
* FESCo (Fedora Engineering Steering Committee): 4 elected seats
* FAmSCo (Fedora Ambassadors Steering Committee): 3 elected seats
Full information about the elections, including the elections schedule,
and links to where one may nominate, can be seen here:
https://fedoraproject.org/wiki/Elections
Running concurrently with the nomination period (and, hence, closing at
the end of the nomination period), the elections questionnaire is also
open for adding questions which will be posed to candidates. Following
the closing of the questionnaire, candidates will be asked to answer
questions relevant to the position for which they are seeking election.
Questions may be added here, and, again, will also close on November 13,
2012:
https://fedoraproject.org/wiki/F19_elections_questionnaire
As noted above, there are 2 seats on the Fedora Board that will be
appointed in this cycle, and I'm pleased as can be to announce that
Major Hayden as the first of these appointments. I'm sure that many of
you know Major from IRC (where you may know of him as rackerhacker), or
perhaps from his blog posts about security or OpenStack, or from the
Fedora Cloud SIG. He's enthusiastic, a fountain of knowledge,
passionate about Fedora, and an all-around awesome guy, and I'm certain
that he'll be able to bring some unique perspectives to the Board.
Welcome, Major!
Major will be taking the seat previously occupied by Toshio Kuratomi
(aka: abadger1999). Toshio has served two years in his appointed seat on
the Fedora Board, and I am incredibly grateful to him for
his efforts, dedication, and commitment to the Board, and Fedora in
general. You are a fantastic role model and contributor - thank you,
Toshio! :)
Further details regarding each body's election follows below. I
encourage everyone to consider running for an elected seat if they have
the interest and desire to do so, and to encourage others that they feel
would be ideal representatives for particular Fedora bodies.
Cheers!
-Robyn
== Fedora Board ==
This election cycle will fill two elected seats for the Board (seats
E1 and E2). Two appointed seats (A1 and A2) will also be filled this
cycle, the first of which is the aforementioned appointment of Major
Hayden; the remaining seat will be appointed following the election. For
more information on nominations, and the process refer to:
https://fedoraproject.org/wiki/Board_nominations
https://fedoraproject.org/wiki/Board/Elections
https://fedoraproject.org/wiki/Board/History
== FESCo ==
This cycle will see candidates elected to four open seats in the Fedora
Engineering Steering Committee. For information on the nominations and
elections:
https://fedoraproject.org/wiki/FESCo_election_policy
https://fedoraproject.org/wiki/Development/SteeringCommittee/Nominations
== FAmSCo ==
This election cycle will see candidates elected to fill three open seats
on the Fedora Ambassadors Steering Committee. For more information,
refer to:
https://fedoraproject.org/wiki/FAmSCo_election_rules
https://fedoraproject.org/wiki/FAmSCo_elections
https://fedoraproject.org/wiki/FAmSCo_nominations
_______________________________________________
devel-announce mailing list
devel-announce(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel-announce
11 years, 5 months
- 1
- 0
Re: fedpkg / koji error
by Tom Callaway
On 10/23/2012 04:54 PM, Thorsten Leemhuis wrote:
> Lo!
>
> On 23.10.2012 17:23, Tom Callaway wrote:
>> On 10/22/2012 10:37 PM, Ralf Corsepius wrote:
>>> On 10/22/2012 10:43 PM, Tom Callaway wrote:
>>>> On 10/22/2012 12:09 PM, Ralf Corsepius wrote:
>>>>>> There is currently no way to "undefine" a macro at the rpm
>>>>>> commandline,
>>>>>
>>>>> rpmbuild --define "xxxx %{nil}" ?
>>>>
>>>> Huh, I swear I knew that once. :) Attached is a patch to use the %{nil}
>>>> behavior instead of setting the unused dist macro to 0. I smoke tested
>>>> and confirmed that the %{rhel} macro is unset on Fedora with this patch
>>>> applied.
>>>
>>> I haven't tried your patch, but don't you have to unset/define %{nil}
>>> all build-host related rpm macros from /etc/rpm/macros.dist?
>>>
>>> It's at least what I can not avoid doing in my before-mentioned
>>> build-scripts.
>>>
>>> I.e. when running my script on Fedora 17, I invoke rpmbuild this way:
>>>
>>> rpmbuild ... \
>>> --define "fedora %{nil}" --define "fc17 %{nil}"
>>> --define "dist .el6" --define "rhel 6" --define "el6 1"
>>> ...
>>>
>>> Otherwise constructs such as
>>> %{?fc17:xxxx}
>>> %{?el6:yyyy}
>>> also won't work correctly in rpm.specs.
>>>
>>> IIUC, fedpkg with your patch sets %dist and unsets %fedora, but it
>>> doesn't seem to catch "fc17".
>>
>> Yeah, thats a valid corner case. It wasn't in the original issue, so I
>> didn't think about it. I'll work on a fix that covers that as well.
>
> Spot: Thanks for working on this and finding a solution that removes the
> inconsistency I was running into with someone else package.
Okay, so here are two patches:
fedpkg-1.10-use-nil-to-unset-distunset.patch (this one uses %nil instead
of 0 in my previous fix)
fedpkg-1.10-unset-runtime-disttag.patch (this patch detects the runtime
environment and unsets the version specific tag (e.g. %{fc17} or
%{el6}), except in the case where the runtime env matches the build
target exactly)
Jesse, please review and apply these upstream and make a new update.
~tom
==
Fedora Project
11 years, 5 months
- 2
- 2
pulseaudio issue, any dbus exports?
by Ian Malone
Hi,
I'm trying to sort out a pulseaudio issue. It's failing to acknowledge
a request (from Jack) to release a device. I've tried the pulseaudio
list but haven't had any answers. The full thread is here:
http://lists.freedesktop.org/archives/pulseaudio-discuss/2012-November/01...
This is an extract from dbus-monitor while jack is trying to start.
There are two sound devices on the system so an .Audio0 and .Audio1,
.Audio0 is not locked, .Audio1 is:
method call sender=:1.110 -> dest=org.freedesktop.DBus serial=4
path=/org/freedesktop/DBus; interface=org.freedesktop.DBus;
member=RequestName
method call sender=:1.110 -> dest=org.freedesktop.DBus serial=5
path=/org/freedesktop/DBus; interface=org.freedesktop.DBus;
member=RequestName
string "org.freedesktop.ReserveDevice1.Audio1"
uint32 4
method call sender=:1.110 ->
dest=org.freedesktop.ReserveDevice1.Audio1 serial=6
path=/org/freedesktop/ReserveDevice1/Audio1;
interface=org.freedesktop.ReserveDevice1; member=RequestRelease
int32 2147483647
error sender=:1.35 -> dest=:1.110
error_name=org.freedesktop.DBus.Error.UnknownMethod reply_serial=6
string "Method "RequestRelease" with signature "i" on interface
"org.freedesktop.ReserveDevice1" doesn't exist
"
Contrast .Audio0:
method call sender=:1.110 -> dest=org.freedesktop.DBus serial=2 path=/org/freede
sktop/DBus; interface=org.freedesktop.DBus; member=RequestName
string "org.freedesktop.ReserveDevice1.Audio0"
uint32 4
method call sender=:1.110 -> dest=org.freedesktop.ReserveDevice1.Audio0 serial=3
path=/org/freedesktop/ReserveDevice1/Audio0; interface=org.freedesktop.ReserveD
evice1; member=RequestRelease
int32 2147483647
signal sender=org.freedesktop.DBus -> dest=(null destination) serial=295 path=/o
rg/freedesktop/DBus; interface=org.freedesktop.DBus; member=NameOwnerChanged
string "org.freedesktop.ReserveDevice1.Audio0"
string ":1.35"
string ""
method call sender=:1.35 -> dest=org.freedesktop.DBus serial=74 path=/org/freede
sktop/DBus; interface=org.freedesktop.DBus; member=ReleaseName
string "org.freedesktop.ReserveDevice1.Audio0"
method return sender=:1.35 -> dest=:1.110 reply_serial=3
boolean true
signal sender=org.freedesktop.DBus -> dest=(null destination) serial=137 path=/o
rg/freedesktop/DBus; interface=org.freedesktop.DBus; member=NameOwnerChanged
string "org.freedesktop.ReserveDevice1.Audio0"
string ""
string ":1.35"
method call sender=:1.35 -> dest=org.freedesktop.DBus serial=76 path=/org/freede
sktop/DBus; interface=org.freedesktop.DBus; member=RequestName
string "org.freedesktop.ReserveDevice1.Audio0"
uint32 5
signal sender=org.freedesktop.DBus -> dest=(null destination)
serial=296 path=/org/freedesktop/DBus; interface=org.freedesktop.DBus;
member=NameOwnerChanged
string "org.freedesktop.ReserveDevice1.Audio0"
string ":1.35"
string ":1.110"
I'll speculate that something somewhere is confused by the presence of
two devices and either Audio1 isn't being provided correctly by pulse
(though it does create it) or requested properly by Jack (though with
only one parameter that's difficult to believe). I suspect it's
probably a bug in the pulse code failing to set up the method, does
that seem likely?
--
imalone
http://ibmalone.blogspot.co.uk
11 years, 5 months
- 1
- 0
rawhide report: 20121106 changes
by Fedora compose checker
Compose started at Tue Nov 6 08:15:10 UTC 2012
Broken deps for x86_64
----------------------------------------------------------
[LabPlot]
LabPlot-1.6.0.2-12.fc18.i686 requires libaudiofile.so.0
LabPlot-1.6.0.2-12.fc18.x86_64 requires libaudiofile.so.0()(64bit)
[PyKDE]
PyKDE-3.16.6-10.fc18.x86_64 requires sip-api(8) >= 0:8.1
[PyQt]
PyQt-3.18.1-12.fc18.x86_64 requires sip-api(8) >= 0:8.1
[autotest-framework]
autotest-framework-server-0.14.3-1.fc17.noarch requires mod_python
[blacs]
blacs-mpich2-1.1-46.fc18.i686 requires libmpich.so.3
blacs-mpich2-1.1-46.fc18.x86_64 requires libmpich.so.3()(64bit)
[cduce]
cduce-0.5.5-2.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
cduce-0.5.5-2.fc18.x86_64 requires ocaml(Pcre) = 0:fedf84da3d313aea51e03bb7d7c99a3b
[coccinelle]
coccinelle-1.0.0-0.rc14.5.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
coccinelle-1.0.0-0.rc14.5.fc18.x86_64 requires ocaml(Pcre) = 0:fedf84da3d313aea51e03bb7d7c99a3b
[cp2k]
cp2k-mpich2-2.3-1.fc19.x86_64 requires libmpichf90.so.3()(64bit)
cp2k-mpich2-2.3-1.fc19.x86_64 requires libmpich.so.3()(64bit)
[dnf]
dnf-0.2.14-2.git4831982.fc18.noarch requires python-hawkey >= 0:0.3.0
[dogtag-pki]
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-selinux >= 0:10.0.0
[dragonegg]
dragonegg-3.1-15.fc19.x86_64 requires gcc = 0:4.7.2-6.fc19
[dustmite]
dustmite-1-5.20120304gitcde46e0.fc17.x86_64 requires libphobos-ldc.so.59()(64bit)
[e16]
e16-1.0.10-3.fc18.x86_64 requires libaudiofile.so.0()(64bit)
[esound]
1:esound-libs-0.2.41-6.fc18.i686 requires libaudiofile.so.0
1:esound-libs-0.2.41-6.fc18.x86_64 requires libaudiofile.so.0()(64bit)
1:esound-tools-0.2.41-6.fc18.x86_64 requires libaudiofile.so.0()(64bit)
[espresso]
espresso-mpich2-3.0.2-4.fc18.x86_64 requires libmpich.so.3()(64bit)
[frei0r-plugins]
frei0r-plugins-1.3-7.fc18.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
frei0r-plugins-1.3-7.fc18.x86_64 requires libopencv_gpu.so.2.4()(64bit)
[gcc-python-plugin]
gcc-python2-debug-plugin-0.9-6.fc19.x86_64 requires gcc = 0:4.7.2-6.fc19
gcc-python2-plugin-0.9-6.fc19.x86_64 requires gcc = 0:4.7.2-6.fc19
gcc-python3-debug-plugin-0.9-6.fc19.x86_64 requires gcc = 0:4.7.2-6.fc19
gcc-python3-plugin-0.9-6.fc19.x86_64 requires gcc = 0:4.7.2-6.fc19
[gcstar]
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::Table)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::HBox)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::Frame)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::EventBox)
[ghc-MemoTrie]
ghc-MemoTrie-0.5-3.fc18.x86_64 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so()(64bit)
[ghc-blaze-builder-conduit]
ghc-blaze-builder-conduit-0.4.0.2-3.fc18.x86_64 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so()(64bit)
[ghc-conduit]
ghc-conduit-0.4.2-3.fc18.x86_64 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so()(64bit)
[ghc-ghc-mtl]
ghc-ghc-mtl-1.0.1.1-2.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
ghc-ghc-mtl-devel-1.0.1.1-2.fc19.x86_64 requires ghc-devel(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
[ghc-hakyll]
ghc-hakyll-3.2.7.2-6.fc18.x86_64 requires libHSpandoc-1.9.4.2-ghc7.4.1.so()(64bit)
ghc-hakyll-3.2.7.2-6.fc18.x86_64 requires ghc(pandoc-1.9.4.2-a2700c5fb49c2879e0846ae80f139244)
ghc-hakyll-devel-3.2.7.2-6.fc18.x86_64 requires ghc-devel(pandoc-1.9.4.2-a2700c5fb49c2879e0846ae80f139244)
[ghc-ltk]
ghc-ltk-0.12.1.0-6.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
ghc-ltk-devel-0.12.1.0-6.fc19.x86_64 requires ghc-devel(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
[ghc-network-conduit]
ghc-network-conduit-0.4.0.1-3.fc18.x86_64 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so()(64bit)
[ghc-snap-core]
ghc-snap-core-0.9.0-4.fc18.x86_64 requires libHSunix-compat-0.3.0.1-ghc7.4.1.so()(64bit)
ghc-snap-core-0.9.0-4.fc18.x86_64 requires libHSmwc-random-0.12.0.0-ghc7.4.1.so()(64bit)
ghc-snap-core-0.9.0-4.fc18.x86_64 requires ghc(unix-compat-0.3.0.1-5c60739e7246890d88ea5d633793062b)
ghc-snap-core-0.9.0-4.fc18.x86_64 requires ghc(mwc-random-0.12.0.0-9ca879896db2ffb2250b04f25bb8cb97)
ghc-snap-core-devel-0.9.0-4.fc18.x86_64 requires ghc-devel(unix-compat-0.3.0.1-5c60739e7246890d88ea5d633793062b)
ghc-snap-core-devel-0.9.0-4.fc18.x86_64 requires ghc-devel(mwc-random-0.12.0.0-9ca879896db2ffb2250b04f25bb8cb97)
[ghc-vector-space]
ghc-vector-space-0.8.2-1.fc18.x86_64 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so()(64bit)
[ghc-void]
ghc-void-0.5.6-1.fc18.x86_64 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so()(64bit)
ghc-void-0.5.6-1.fc18.x86_64 requires ghc(semigroups-0.8.3.2-608a60352745868d7816fbfb76870ddf)
ghc-void-devel-0.5.6-1.fc18.x86_64 requires ghc-devel(semigroups-0.8.3.2-608a60352745868d7816fbfb76870ddf)
[ghc-wai]
ghc-wai-1.2.0.3-1.fc18.x86_64 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so()(64bit)
[ghc-wai-extra]
ghc-wai-extra-1.2.0.4-4.fc18.x86_64 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so()(64bit)
[ghc-warp]
ghc-warp-1.2.2-1.fc18.x86_64 requires libHSunix-compat-0.3.0.1-ghc7.4.1.so()(64bit)
ghc-warp-1.2.2-1.fc18.x86_64 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so()(64bit)
ghc-warp-1.2.2-1.fc18.x86_64 requires ghc(unix-compat-0.3.0.1-5c60739e7246890d88ea5d633793062b)
ghc-warp-devel-1.2.2-1.fc18.x86_64 requires ghc-devel(unix-compat-0.3.0.1-5c60739e7246890d88ea5d633793062b)
[ghc-zlib-conduit]
ghc-zlib-conduit-0.4.0.2-1.fc18.x86_64 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so()(64bit)
[gnome-libs]
1:gnome-libs-1.4.2-21.fc18.i686 requires libaudiofile.so.0
1:gnome-libs-1.4.2-21.fc18.x86_64 requires libaudiofile.so.0()(64bit)
[gnuplot]
gnuplot-latex-4.6.0-2.fc18.noarch requires texlive-texmf-xetex
[gstreamer-plugins-bad-free]
gstreamer-plugins-bad-free-extras-0.10.23-11.fc18.i686 requires libopencv_nonfree.so.2.4
gstreamer-plugins-bad-free-extras-0.10.23-11.fc18.i686 requires libopencv_gpu.so.2.4
gstreamer-plugins-bad-free-extras-0.10.23-11.fc18.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
gstreamer-plugins-bad-free-extras-0.10.23-11.fc18.x86_64 requires libopencv_gpu.so.2.4()(64bit)
[haddock]
ghc-haddock-2.10.0-6.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
ghc-haddock-devel-2.10.0-6.fc19.x86_64 requires ghc-devel(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
haddock-2.10.0-6.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
[js-of-ocaml]
js-of-ocaml-1.0.9-5.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
js-of-ocaml-1.0.9-5.fc18.x86_64 requires ocaml(Lwt) = 0:3d89ee9aaa50aa82dc0be688d51d0cc7
[kamoso]
kamoso-2.0.2-6.fc18.x86_64 requires libkipi.so.9()(64bit)
[kphotoalbum]
kphotoalbum-4.2-4.fc18.x86_64 requires libkipi.so.9()(64bit)
kphotoalbum-4.2-4.fc18.x86_64 requires libkdcraw.so.21()(64bit)
[leksah]
ghc-leksah-0.12.1.3-6.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
ghc-leksah-devel-0.12.1.3-6.fc19.x86_64 requires ghc-devel(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
leksah-0.12.1.3-6.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
[leksah-server]
ghc-leksah-server-0.12.1.2-6.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
ghc-leksah-server-devel-0.12.1.2-6.fc19.x86_64 requires ghc-devel(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
leksah-server-0.12.1.2-6.fc19.x86_64 requires ghc(ghc-7.4.1-2e8223f1ab945abe712c4fc4010c270e)
[libfreenect]
libfreenect-opencv-0.1.2-2.fc19.i686 requires libopencv_nonfree.so.2.4
libfreenect-opencv-0.1.2-2.fc19.i686 requires libopencv_gpu.so.2.4
libfreenect-opencv-0.1.2-2.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
libfreenect-opencv-0.1.2-2.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
[libreoffice]
1:libreoffice-core-3.6.3.2-4.fc19.x86_64 requires libexttextcat-1.0.so.0()(64bit)
[libsyncml]
1:libsyncml-0.4.6-4.fc17.i686 requires libsoup-2.2.so.8
1:libsyncml-0.4.6-4.fc17.x86_64 requires libsoup-2.2.so.8()(64bit)
[mod_pubcookie]
mod_pubcookie-3.3.4a-7.fc18.x86_64 requires httpd-mmn = 0:20051115-x86-64
[mpi4py]
mpi4py-mpich2-1.3-5.fc18.x86_64 requires libmpich.so.3()(64bit)
python3-mpi4py-mpich2-1.3-5.fc18.x86_64 requires libmpich.so.3()(64bit)
[mrpt]
mrpt-apps-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-apps-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-base-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-base-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-base-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-base-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-bayes-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-bayes-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-bayes-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-bayes-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-detectors-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-detectors-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-detectors-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-detectors-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-graphs-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-graphs-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-graphs-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-graphs-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-graphslam-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-graphslam-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-graphslam-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-graphslam-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-gui-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-gui-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-gui-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-gui-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-hmtslam-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-hmtslam-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-hmtslam-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-hmtslam-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-hwdrivers-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-hwdrivers-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-hwdrivers-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-hwdrivers-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-maps-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-maps-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-maps-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-maps-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-obs-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-obs-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-obs-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-obs-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-opengl-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-opengl-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-opengl-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-opengl-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-reactivenav-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-reactivenav-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-reactivenav-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-reactivenav-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-scanmatching-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-scanmatching-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-scanmatching-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-scanmatching-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-slam-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-slam-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-slam-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-slam-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-topography-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-topography-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-topography-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-topography-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
mrpt-vision-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-vision-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-vision-0.9.6-1.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
mrpt-vision-0.9.6-1.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
[netcdf-fortran]
netcdf-fortran-openmpi-4.2-5.fc19.i686 requires libmpi_f90.so.3
netcdf-fortran-openmpi-4.2-5.fc19.x86_64 requires libmpi_f90.so.3()(64bit)
[ocaml-SDL]
ocaml-SDL-0.8.0-6.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-augeas]
ocaml-augeas-0.5-2.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-bisect]
ocaml-bisect-1.1-3.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-bitstring]
ocaml-bitstring-2.0.3-4.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-cil]
ocaml-cil-1.4.0-5.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-cryptokit]
ocaml-cryptokit-1.6-2.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-dbus]
ocaml-dbus-0.29-5.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-deriving]
ocaml-deriving-0.1.1a-16.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-expat]
ocaml-expat-0.9.1-23.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-gsl]
ocaml-gsl-0.6.0-15.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-json-static]
ocaml-json-static-0.9.8-7.fc18.i686 requires ocaml(runtime) = 0:4.00.0
ocaml-json-static-0.9.8-7.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-json-wheel]
ocaml-json-wheel-1.0.6-9.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-newt]
ocaml-newt-0.9-13.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-openin]
ocaml-openin-20070524-15.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-p3l]
ocaml-p3l-2.03-11.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-preludeml]
ocaml-preludeml-0.1-0.21.20100314.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
ocaml-preludeml-0.1-0.21.20100314.fc18.x86_64 requires ocaml(Pcre) = 0:fedf84da3d313aea51e03bb7d7c99a3b
[ocaml-reins]
ocaml-reins-0.1a-13.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-res]
ocaml-res-3.2.0-9.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-sqlite]
ocaml-sqlite-1.6.3-2.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-xmlrpc-light]
ocaml-xmlrpc-light-0.6.1-10.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[ocaml-zip]
ocaml-zip-1.04-9.fc18.x86_64 requires ocaml(runtime) = 0:4.00.0
[openvrml]
libopenvrml-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
libopenvrml-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
libopenvrml-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
libopenvrml-gl-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
libopenvrml-gl-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-java-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-java-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-java-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-javascript-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-javascript-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-javascript-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-nodes-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-nodes-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-nodes-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-xembed-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-xembed-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-xembed-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
[perl-OpenOffice-UNO]
perl-OpenOffice-UNO-0.07-3.fc17.x86_64 requires perl(:MODULE_COMPAT_5.14.2)
[php-pecl-gearman]
php-pecl-gearman-1.0.2-1.fc18.x86_64 requires libgearman.so.6()(64bit)
[player]
player-3.0.2-20.fc19.i686 requires libopencv_nonfree.so.2.4
player-3.0.2-20.fc19.i686 requires libopencv_gpu.so.2.4
player-3.0.2-20.fc19.x86_64 requires libopencv_nonfree.so.2.4()(64bit)
player-3.0.2-20.fc19.x86_64 requires libopencv_gpu.so.2.4()(64bit)
[ppl]
ppl-swiprolog-0.11.2-10.fc18.x86_64 requires libswipl.so.6.0.2()(64bit)
[pyfuzzy]
pyfuzzy-0.1.0-5.fc18.noarch requires antlr3-python
[python-webob1.2]
python3-webob1.2-1.2.1-4.fc17.noarch requires python(abi) = 0:3.2
[reciteword]
reciteword-0.8.4-10.fc18.x86_64 requires esound
[resource-agents]
resource-agents-3.9.2-3.fc18.5.x86_64 requires libplumbgpl.so.2()(64bit)
resource-agents-3.9.2-3.fc18.5.x86_64 requires libplumb.so.2()(64bit)
[ruby-revolution]
ruby-revolution-0.5-4.svn210.fc18.15.x86_64 requires libedataserver-1.2.so.16()(64bit)
ruby-revolution-0.5-4.svn210.fc18.15.x86_64 requires libecal-1.2.so.12()(64bit)
ruby-revolution-0.5-4.svn210.fc18.15.x86_64 requires libebook-1.2.so.13()(64bit)
[rubygem-calendar_date_select]
rubygem-calendar_date_select-1.15-6.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-linecache]
rubygem-linecache-0.43-5.fc17.x86_64 requires ruby(abi) = 0:1.8
rubygem-linecache-0.43-5.fc17.x86_64 requires libruby.so.1.8()(64bit)
[rubygem-ruby-debug]
rubygem-ruby-debug-0.10.5-0.3.rc1.fc17.1.noarch requires ruby(abi) = 0:1.8
[rubygem-ruby-debug-base]
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.x86_64 requires ruby(abi) = 0:1.8
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.x86_64 requires libruby.so.1.8()(64bit)
[scalapack]
scalapack-mpich2-1.7.5-16.fc18.i686 requires libmpich.so.3
scalapack-mpich2-1.7.5-16.fc18.x86_64 requires libmpich.so.3()(64bit)
[scotch]
scotch-5.1.11-3.fc18.i686 requires libmpich.so.3
scotch-5.1.11-3.fc18.x86_64 requires libmpich.so.3()(64bit)
[spacechart]
spacechart-0.9.5-8.fc18.x86_64 requires libaudiofile.so.0()(64bit)
[spacewalk-web]
spacewalk-dobby-1.8.49-1.fc19.noarch requires perl(Spacewalk::Setup)
[tex-musixtex]
tex-musixtex-0.114-11.fc18.noarch requires texlive-texmf
[tortoisehg]
tortoisehg-2.5.1-1.fc19.noarch requires mercurial < 0:2.4
[znc-infobot]
znc-infobot-0.206-2.fc18.x86_64 requires znc = 0:0.206
Broken deps for i386
----------------------------------------------------------
[LabPlot]
LabPlot-1.6.0.2-12.fc18.i686 requires libaudiofile.so.0
[PyKDE]
PyKDE-3.16.6-10.fc18.i686 requires sip-api(8) >= 0:8.1
[PyQt]
PyQt-3.18.1-12.fc18.i686 requires sip-api(8) >= 0:8.1
[autotest-framework]
autotest-framework-server-0.14.3-1.fc17.noarch requires mod_python
[blacs]
blacs-mpich2-1.1-46.fc18.i686 requires libmpich.so.3
[cduce]
cduce-0.5.5-2.fc18.i686 requires ocaml(runtime) = 0:4.00.0
cduce-0.5.5-2.fc18.i686 requires ocaml(Pcre) = 0:fedf84da3d313aea51e03bb7d7c99a3b
[coccinelle]
coccinelle-1.0.0-0.rc14.5.fc18.i686 requires ocaml(runtime) = 0:4.00.0
coccinelle-1.0.0-0.rc14.5.fc18.i686 requires ocaml(Pcre) = 0:fedf84da3d313aea51e03bb7d7c99a3b
[cp2k]
cp2k-mpich2-2.3-1.fc19.i686 requires libmpichf90.so.3
cp2k-mpich2-2.3-1.fc19.i686 requires libmpich.so.3
[dnf]
dnf-0.2.14-2.git4831982.fc18.noarch requires python-hawkey >= 0:0.3.0
[dogtag-pki]
dogtag-pki-10.0.0-0.8.a1.fc19.noarch requires pki-selinux >= 0:10.0.0
[dragonegg]
dragonegg-3.1-15.fc19.i686 requires gcc = 0:4.7.2-6.fc19
[dustmite]
dustmite-1-5.20120304gitcde46e0.fc17.i686 requires libphobos-ldc.so.59
[e16]
e16-1.0.10-3.fc18.i686 requires libaudiofile.so.0
[esound]
1:esound-libs-0.2.41-6.fc18.i686 requires libaudiofile.so.0
1:esound-tools-0.2.41-6.fc18.i686 requires libaudiofile.so.0
[espresso]
espresso-mpich2-3.0.2-4.fc18.i686 requires libmpich.so.3
[frei0r-plugins]
frei0r-plugins-1.3-7.fc18.i686 requires libopencv_nonfree.so.2.4
frei0r-plugins-1.3-7.fc18.i686 requires libopencv_gpu.so.2.4
[gcc-python-plugin]
gcc-python2-debug-plugin-0.9-6.fc19.i686 requires gcc = 0:4.7.2-6.fc19
gcc-python2-plugin-0.9-6.fc19.i686 requires gcc = 0:4.7.2-6.fc19
gcc-python3-debug-plugin-0.9-6.fc19.i686 requires gcc = 0:4.7.2-6.fc19
gcc-python3-plugin-0.9-6.fc19.i686 requires gcc = 0:4.7.2-6.fc19
[gcstar]
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::Table)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::HBox)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::Frame)
gcstar-1.7.0-2.fc19.noarch requires perl(Gtk2::EventBox)
[ghc-MemoTrie]
ghc-MemoTrie-0.5-3.fc18.i686 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so
[ghc-blaze-builder-conduit]
ghc-blaze-builder-conduit-0.4.0.2-3.fc18.i686 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so
[ghc-conduit]
ghc-conduit-0.4.2-3.fc18.i686 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so
[ghc-ghc-mtl]
ghc-ghc-mtl-1.0.1.1-2.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
ghc-ghc-mtl-devel-1.0.1.1-2.fc19.i686 requires ghc-devel(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
[ghc-hakyll]
ghc-hakyll-3.2.7.2-6.fc18.i686 requires libHSpandoc-1.9.4.2-ghc7.4.1.so
ghc-hakyll-3.2.7.2-6.fc18.i686 requires ghc(pandoc-1.9.4.2-47546e6ff161aeeb279622df1ad941e6)
ghc-hakyll-devel-3.2.7.2-6.fc18.i686 requires ghc-devel(pandoc-1.9.4.2-47546e6ff161aeeb279622df1ad941e6)
[ghc-ltk]
ghc-ltk-0.12.1.0-6.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
ghc-ltk-devel-0.12.1.0-6.fc19.i686 requires ghc-devel(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
[ghc-network-conduit]
ghc-network-conduit-0.4.0.1-3.fc18.i686 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so
[ghc-snap-core]
ghc-snap-core-0.9.0-4.fc18.i686 requires libHSunix-compat-0.3.0.1-ghc7.4.1.so
ghc-snap-core-0.9.0-4.fc18.i686 requires libHSmwc-random-0.12.0.0-ghc7.4.1.so
ghc-snap-core-0.9.0-4.fc18.i686 requires ghc(unix-compat-0.3.0.1-b9c7d89dcdab961520b78c1e6f105f8c)
ghc-snap-core-0.9.0-4.fc18.i686 requires ghc(mwc-random-0.12.0.0-2d78514ecfb165611a922586cf4af72a)
ghc-snap-core-devel-0.9.0-4.fc18.i686 requires ghc-devel(unix-compat-0.3.0.1-b9c7d89dcdab961520b78c1e6f105f8c)
ghc-snap-core-devel-0.9.0-4.fc18.i686 requires ghc-devel(mwc-random-0.12.0.0-2d78514ecfb165611a922586cf4af72a)
[ghc-vector-space]
ghc-vector-space-0.8.2-1.fc18.i686 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so
[ghc-void]
ghc-void-0.5.6-1.fc18.i686 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so
ghc-void-0.5.6-1.fc18.i686 requires ghc(semigroups-0.8.3.2-01002deb5c1eabd6191c14db9d26c470)
ghc-void-devel-0.5.6-1.fc18.i686 requires ghc-devel(semigroups-0.8.3.2-01002deb5c1eabd6191c14db9d26c470)
[ghc-wai]
ghc-wai-1.2.0.3-1.fc18.i686 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so
[ghc-wai-extra]
ghc-wai-extra-1.2.0.4-4.fc18.i686 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so
[ghc-warp]
ghc-warp-1.2.2-1.fc18.i686 requires libHSunix-compat-0.3.0.1-ghc7.4.1.so
ghc-warp-1.2.2-1.fc18.i686 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so
ghc-warp-1.2.2-1.fc18.i686 requires ghc(unix-compat-0.3.0.1-b9c7d89dcdab961520b78c1e6f105f8c)
ghc-warp-devel-1.2.2-1.fc18.i686 requires ghc-devel(unix-compat-0.3.0.1-b9c7d89dcdab961520b78c1e6f105f8c)
[ghc-zlib-conduit]
ghc-zlib-conduit-0.4.0.2-1.fc18.i686 requires libHSsemigroups-0.8.3.2-ghc7.4.1.so
[gnome-libs]
1:gnome-libs-1.4.2-21.fc18.i686 requires libaudiofile.so.0
[gnuplot]
gnuplot-latex-4.6.0-2.fc18.noarch requires texlive-texmf-xetex
[gstreamer-plugins-bad-free]
gstreamer-plugins-bad-free-extras-0.10.23-11.fc18.i686 requires libopencv_nonfree.so.2.4
gstreamer-plugins-bad-free-extras-0.10.23-11.fc18.i686 requires libopencv_gpu.so.2.4
[haddock]
ghc-haddock-2.10.0-6.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
ghc-haddock-devel-2.10.0-6.fc19.i686 requires ghc-devel(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
haddock-2.10.0-6.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
[js-of-ocaml]
js-of-ocaml-1.0.9-5.fc18.i686 requires ocaml(runtime) = 0:4.00.0
js-of-ocaml-1.0.9-5.fc18.i686 requires ocaml(Lwt) = 0:3d89ee9aaa50aa82dc0be688d51d0cc7
[kamoso]
kamoso-2.0.2-6.fc18.i686 requires libkipi.so.9
[kphotoalbum]
kphotoalbum-4.2-4.fc18.i686 requires libkipi.so.9
kphotoalbum-4.2-4.fc18.i686 requires libkdcraw.so.21
[leksah]
ghc-leksah-0.12.1.3-6.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
ghc-leksah-devel-0.12.1.3-6.fc19.i686 requires ghc-devel(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
leksah-0.12.1.3-6.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
[leksah-server]
ghc-leksah-server-0.12.1.2-6.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
ghc-leksah-server-devel-0.12.1.2-6.fc19.i686 requires ghc-devel(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
leksah-server-0.12.1.2-6.fc19.i686 requires ghc(ghc-7.4.1-3ffc9c8a1a016906b934cf5d782e3f7f)
[libfreenect]
libfreenect-opencv-0.1.2-2.fc19.i686 requires libopencv_nonfree.so.2.4
libfreenect-opencv-0.1.2-2.fc19.i686 requires libopencv_gpu.so.2.4
[libreoffice]
1:libreoffice-core-3.6.3.2-4.fc19.i686 requires libexttextcat-1.0.so.0
[libsyncml]
1:libsyncml-0.4.6-4.fc17.i686 requires libsoup-2.2.so.8
[mod_pubcookie]
mod_pubcookie-3.3.4a-7.fc18.i686 requires httpd-mmn = 0:20051115-x86-32
[mpi4py]
mpi4py-mpich2-1.3-5.fc18.i686 requires libmpich.so.3
python3-mpi4py-mpich2-1.3-5.fc18.i686 requires libmpich.so.3
[mrpt]
mrpt-apps-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-apps-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-base-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-base-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-bayes-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-bayes-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-detectors-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-detectors-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-graphs-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-graphs-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-graphslam-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-graphslam-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-gui-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-gui-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-hmtslam-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-hmtslam-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-hwdrivers-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-hwdrivers-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-maps-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-maps-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-obs-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-obs-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-opengl-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-opengl-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-reactivenav-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-reactivenav-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-scanmatching-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-scanmatching-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-slam-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-slam-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-topography-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-topography-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
mrpt-vision-0.9.6-1.fc19.i686 requires libopencv_nonfree.so.2.4
mrpt-vision-0.9.6-1.fc19.i686 requires libopencv_gpu.so.2.4
[netcdf-fortran]
netcdf-fortran-openmpi-4.2-5.fc19.i686 requires libmpi_f90.so.3
[ocaml-SDL]
ocaml-SDL-0.8.0-6.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-augeas]
ocaml-augeas-0.5-2.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-bisect]
ocaml-bisect-1.1-3.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-bitstring]
ocaml-bitstring-2.0.3-4.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-cil]
ocaml-cil-1.4.0-5.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-cryptokit]
ocaml-cryptokit-1.6-2.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-dbus]
ocaml-dbus-0.29-5.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-deriving]
ocaml-deriving-0.1.1a-16.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-expat]
ocaml-expat-0.9.1-23.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-gsl]
ocaml-gsl-0.6.0-15.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-json-static]
ocaml-json-static-0.9.8-7.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-json-wheel]
ocaml-json-wheel-1.0.6-9.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-newt]
ocaml-newt-0.9-13.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-openin]
ocaml-openin-20070524-15.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-p3l]
ocaml-p3l-2.03-11.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-preludeml]
ocaml-preludeml-0.1-0.21.20100314.fc18.i686 requires ocaml(runtime) = 0:4.00.0
ocaml-preludeml-0.1-0.21.20100314.fc18.i686 requires ocaml(Pcre) = 0:fedf84da3d313aea51e03bb7d7c99a3b
[ocaml-reins]
ocaml-reins-0.1a-13.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-res]
ocaml-res-3.2.0-9.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-sqlite]
ocaml-sqlite-1.6.3-2.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-xmlrpc-light]
ocaml-xmlrpc-light-0.6.1-10.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[ocaml-zip]
ocaml-zip-1.04-9.fc18.i686 requires ocaml(runtime) = 0:4.00.0
[openvrml]
libopenvrml-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-java-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-java-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-java-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-javascript-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-javascript-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-javascript-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-nodes-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-nodes-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-nodes-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-xembed-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-xembed-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-xembed-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
[perl-OpenOffice-UNO]
perl-OpenOffice-UNO-0.07-3.fc17.i686 requires perl(:MODULE_COMPAT_5.14.2)
perl-OpenOffice-UNO-0.07-3.fc17.i686 requires libsal_textenc.so
[php-pecl-gearman]
php-pecl-gearman-1.0.2-1.fc18.i686 requires libgearman.so.6
[player]
player-3.0.2-20.fc19.i686 requires libopencv_nonfree.so.2.4
player-3.0.2-20.fc19.i686 requires libopencv_gpu.so.2.4
[ppl]
ppl-swiprolog-0.11.2-10.fc18.i686 requires libswipl.so.6.0.2
[pyfuzzy]
pyfuzzy-0.1.0-5.fc18.noarch requires antlr3-python
[python-webob1.2]
python3-webob1.2-1.2.1-4.fc17.noarch requires python(abi) = 0:3.2
[reciteword]
reciteword-0.8.4-10.fc18.i686 requires esound
[resource-agents]
resource-agents-3.9.2-3.fc18.5.i686 requires libplumbgpl.so.2
resource-agents-3.9.2-3.fc18.5.i686 requires libplumb.so.2
[ruby-revolution]
ruby-revolution-0.5-4.svn210.fc18.15.i686 requires libedataserver-1.2.so.16
ruby-revolution-0.5-4.svn210.fc18.15.i686 requires libecal-1.2.so.12
ruby-revolution-0.5-4.svn210.fc18.15.i686 requires libebook-1.2.so.13
[rubygem-calendar_date_select]
rubygem-calendar_date_select-1.15-6.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-linecache]
rubygem-linecache-0.43-5.fc17.i686 requires ruby(abi) = 0:1.8
rubygem-linecache-0.43-5.fc17.i686 requires libruby.so.1.8
[rubygem-ruby-debug]
rubygem-ruby-debug-0.10.5-0.3.rc1.fc17.1.noarch requires ruby(abi) = 0:1.8
[rubygem-ruby-debug-base]
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.i686 requires ruby(abi) = 0:1.8
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.i686 requires libruby.so.1.8
[scalapack]
scalapack-mpich2-1.7.5-16.fc18.i686 requires libmpich.so.3
[scotch]
scotch-5.1.11-3.fc18.i686 requires libmpich.so.3
[spacechart]
spacechart-0.9.5-8.fc18.i686 requires libaudiofile.so.0
[spacewalk-web]
spacewalk-dobby-1.8.49-1.fc19.noarch requires perl(Spacewalk::Setup)
[tex-musixtex]
tex-musixtex-0.114-11.fc18.noarch requires texlive-texmf
[tortoisehg]
tortoisehg-2.5.1-1.fc19.noarch requires mercurial < 0:2.4
[znc-infobot]
znc-infobot-0.206-2.fc18.i686 requires znc = 0:0.206
New package: fedup-0.7-1.fc17
The Fedora Upgrade tool
New package: librcc-0.2.9-3.fc19
RusXMMS Charset Conversion Library
New package: mate-utils-1.4.0-3.fc19
MATE utility programs
New package: ocaml-zarith-1.1-2.fc19
OCaml interface to GMP
New package: qextserialport-1.2-0.2.beta2.fc19
Qt interface class for old fashioned serial ports
Updated Packages:
alienarena-7.60.1-4.fc19
------------------------
* Sun Nov 04 2012 Chandler Wilkerson <chwilk(a)rice.edu> - 7.60.1-4
- Fixed epoch mismatch for -data dependency in -server subpackage stanza
asterisk-11.0.1-1.fc19
----------------------
* Mon Nov 05 2012 Jeffrey Ollie <jeff(a)ocjtech.us> - 11.0.1-1
- The Asterisk Development Team has announced the release of Asterisk 11.0.1.
- This release is available for immediate download at
- http://downloads.asterisk.org/pub/telephony/asterisk
-
- The release of Asterisk 11.0.1 resolves several issues reported by the
- community and would have not been possible without your participation.
- Thank you!
-
- The following are the issues resolved in this release:
-
- * --- chan_sip: Fix a bug causing SIP reloads to remove all entries
- from the registry
- (Closes issue ASTERISK-20611. Reported by Alisher)
-
- * --- confbridge: Fix a bug which made conferences not record with
- AMI/CLI commands
- (Closes issue ASTERISK-20601. Reported by Vilius)
-
- * --- Fix an issue with res_http_websocket where the chan_sip
- WebSocket handler could not be registered.
- (Closes issue ASTERISK-20631. Reported by danjenkins)
-
- For a full list of changes in this release, please see the ChangeLog:
-
- http://downloads.asterisk.org/pub/telephony/asterisk/ChangeLog-11.0.1
cairo-1.12.8-1.fc19
-------------------
* Mon Nov 05 2012 Matthias Clasen <mclasen(a)redhat.com> - 1.12.8-1
- Update to 1.12.8, including a fix for screenshots in fallback mode
coreutils-8.20-2.fc19
---------------------
* Mon Nov 05 2012 Ondrej Vasik <ovasik(a)redhat.com> 8.20-2
- disable the temporary O_SYNC fix (glibc is fixed - #872366)
ctags-5.8-9.fc19
----------------
* Mon Nov 05 2012 Marcela Mašláňová <mmaslano(a)redhat.com> - 5.8-9
- fix license field again
digikam-3.0.0-0.6.beta2.fc19
----------------------------
* Mon Nov 05 2012 Rex Dieter <rdieter(a)fedoraproject.org> 3.0.0-0.6.beta2
- rebuild (opencv)
docbook2X-0.8.8-13.fc19
-----------------------
* Mon Nov 05 2012 Caolán McNamara <caolanm(a)redhat.com> - 0.8.8-13
- Resolves: rhbz#872580 license text is MIT-alike rather than BSD
which fits with the upstream web-site declaration
emacs-evil-0.1-0.5.20121003gitdcb8ebc.fc19
------------------------------------------
* Mon Nov 05 2012 Sébastien Willmann <sebastien.willmann(a)gmail.com> - 0.1-0.5.20121003gitdcb8ebc
- Update to revision dcb8ebc
- Added tests
fence-agents-3.1.11-1.fc19
--------------------------
* Mon Nov 05 2012 Marek Grac <mgrac(a)redhat.com> - 3.1.11-1
- new upstream release
frama-c-1.8-4.fc19
------------------
* Mon Nov 05 2012 Jerry James <loganjerry(a)gmail.com> - 1.8-4
- Build with zarith support
gcc-4.7.2-7.fc19
----------------
* Mon Nov 05 2012 Jakub Jelinek <jakub(a)redhat.com> 4.7.2-7
- update from the 4.7 branch
- PRs c++/54984, c++/54988, debug/54828, libstdc++/55047, libstdc++/55123,
libstdc++/55169, middle-end/54945, rtl-optimization/53701,
rtl-optimization/54870, target/53975, target/54892, target/55019,
target/55175, tree-optimization/53708, tree-optimization/54146,
tree-optimization/54877, tree-optimization/54902,
tree-optimization/54920, tree-optimization/54985
- backported s390{,x} zEC12 enablement (#805114)
- backport of selected debug info quality improvements
- PRs debug/54402, debug/54693, debug/54953, debug/54970, debug/54971
- optimize away overflow checking for new char[n]; and similar cases
where n is multiplied by 1
girara-0.1.4-1.fc19
-------------------
* Mon Nov 05 2012 Kevin Fenzi <kevin(a)scrye.com> 0.1.4-1
- Update to 0.1.4
glibc-2.16.90-27.fc19
---------------------
* Mon Nov 05 2012 Jeff Law <law(a)redhat.com> - 2.16.90-27
- Resync with upstream sources.
- Don't use distinct patches for 770869, 787201 and 688948
as they all modify stuff under fedora/
- Repack patchlist
glogg-0.8.3-4.fc19
------------------
* Thu Nov 01 2012 Damian Wrobel <dwrobel(a)ertelnet.rybnik.pl> - 0.8.3-4
- switch to use the python-markdown2 for generating the documentation.
gnutls-2.12.20-4.fc19
---------------------
* Thu Nov 01 2012 Tomas Mraz <tmraz(a)redhat.com> 2.12.20-4
- negotiate only FIPS approved algorithms in the FIPS mode (#871826)
gputils-0.14.3-1.fc19
---------------------
* Mon Nov 05 2012 Alain Portal <alain.portal[AT]univ-montp2[DOT]fr> 0.14.3-1
- New upstream version
hdf5-1.8.9-4.fc19
-----------------
* Mon Nov 05 2012 Orion Poplawski <orion(a)cora.nwra.com> 1.8.9-4
- Rebuild for fixed openmpi f90 soname
hunspell-la-0.20110807-4.fc19
-----------------------------
* Mon Nov 05 2012 Caolán McNamara <caolanm(a)redhat.com> - 0.20110807-4
- included (but unused) hyphenation patterns are under unversioned LGPL
hunspell-mn-0.20080709-6.fc19
-----------------------------
* Mon Nov 05 2012 Caolan McNamara <caolanm(a)redhat.com> - 0.20080709-6
- uninstalled hyphenation patterns are under unversioned LGPLv2
hunspell-sr-0.20100920-5.fc19
-----------------------------
* Mon Nov 05 2012 Caolán McNamara <caolanm(a)redhat.com> - 0.20100920-5
- clarify license
hyphen-2.8.6-1.fc19
-------------------
* Mon Nov 05 2012 Caolán McNamara <caolanm(a)redhat.com> - 2.8.6-1
- latest version
jetty-8.1.5-9.fc19
------------------
* Mon Nov 05 2012 Stanislav Ochotnicky <sochotnicky(a)redhat.com> - 8.1.5-9
- Use file lists generated by improved add_maven_depmap macro
kdevelop-php-1.4.1-1.fc19
-------------------------
* Mon Nov 05 2012 Jan Grulich <jgrulich(a)redhat.com> 1.4.1-1
- Update to 1.4.1
kdevplatform-1.4.1-1.fc19
-------------------------
* Mon Nov 05 2012 Jan Grulich <jgrulich(a)redhat.com> 1.4.1-1
- Update to 1.4.1
kdf-4.9.3-1.fc19
----------------
* Sat Nov 03 2012 Rex Dieter <rdieter(a)fedoraproject.org> - 4.9.3-1
- 4.9.3
kernel-3.7.0-0.rc4.git0.1.fc19
------------------------------
* Mon Nov 05 2012 Josh Boyer <jwboyer(a)redhat.com> - 3.7.0-0.rc4.git0.1
- Linux v3.7-rc4
- Disable debugging options.
- Fix build break without CONFIG_EFI set (reported by Peter W. Bowey)
libEMF-1.0.6-2.fc19
-------------------
* Mon Nov 05 2012 Stanislav Ochotnicky <sochotnicky(a)redhat.com> - 1.0.6-2
- Fixes for non-x86 64bit architectures
libexttextcat-3.4.0-1.fc19
--------------------------
* Mon Nov 05 2012 Caolán McNamara <caolanm(a)redhat.com> 3.4.0-1
- latest import
libmongo-client-0.1.6.1-1.fc19
------------------------------
* Mon Nov 05 2012 Milan Bartos <mbartos(a)redhat.com> - 0.1.6.1-1
- update to 0.1.6.1
libselinux-2.1.12-7.fc19
------------------------
* Thu Nov 01 2012 Dan Walsh <dwalsh(a)redhat.com> - 2.1.12-7
- Apply patch from eparis to fix leaked file descriptor in new labeling code
* Fri Oct 19 2012 Dan Walsh <dwalsh(a)redhat.com> - 2.1.12-6
- Add new function mode_to_security_class which takes mode instead of a string.
- Possibly will be used with coreutils.
* Mon Oct 15 2012 Dan Walsh <dwalsh(a)redhat.com> - 2.1.12-5
- Add back selinuxconlist and selinuxdefcon man pages
* Mon Oct 15 2012 Dan Walsh <dwalsh(a)redhat.com> - 2.1.12-4
- Fix segfault from calling audit2why.finish() multiple times
* Fri Oct 12 2012 Dan Walsh <dwalsh(a)redhat.com> - 2.1.12-3
- Fix up selinux man page to reference service man pages
* Wed Sep 19 2012 Dan Walsh <dwalsh(a)redhat.com> - 2.1.12-2
- Rebuild with fixed libsepol
libteam-0.1-20.20121105git3b95b34.fc19
--------------------------------------
* Mon Nov 05 2012 Jiri Pirko <jpirko(a)redhat.com> - 0.1-20.20121105git3b95b34
- Rebase to git commit 3b95b34
lightdm-1.4.0-3.fc19
--------------------
* Mon Nov 05 2012 Rex Dieter <rdieter(a)fedoraproject.org> 1.4.0-3
- native org.freedesktop.login1.(PowerOff|Reboot) support (#872797)
* Mon Nov 05 2012 Rex Dieter <rdieter(a)fedoraproject.org> 1.4.0-2
- lightdm: provide polkit .rules for actions (#872797)
luarocks-2.0.12-1.fc19
----------------------
* Mon Nov 05 2012 Michel Salim <salimma(a)fedoraproject.org> - 2.0.12-1
- Update to 2.0.12
mate-window-manager-1.5.2-3.fc19
--------------------------------
* Mon Nov 05 2012 Rex Dieter <rdieter(a)fedoraproject.org> 1.5.2-3
- drop Provides: firstboot(windowmanager) until bug #873342 is fixed
mcollective-qpid-plugin-1.0.1-1.fc19
------------------------------------
* Mon Nov 05 2012 Adam Miller <admiller(a)redhat.com> 1.0.1-1
- Updating to latest upstream release
mingw-qt-4.8.3-3.fc19
---------------------
* Sun Nov 04 2012 Erik van Pienbroek <epienbro(a)fedoraproject.org> - 4.8.3-3
- Don't automatically strip debugging symbols from binaries created using qmake
as we've got RPM wrapper strips to automatically split off debugging symbols
to a separate debuginfo subpackage
- Make sure linking against the static QtUiTools library works out-of-the-box
* Sat Oct 27 2012 Erik van Pienbroek <epienbro(a)fedoraproject.org> - 4.8.3-2
- Added static libraries for QtCLucene, QtDesigner, QtHelp and QtUiTools
- Added various Requires tags to the -static subpackages as automatic
dependency resolving doesn't work on static libraries
- Make sure the function qt_sendSpontaneousEvent is exported in the
QtGui libraries as the ActiveQt component depends on it
mythes-1.2.3-3.fc19
-------------------
* Mon Nov 05 2012 Caolán McNamara <caolanm(a)redhat.com> - 1.2.3-3
- tarball contains MIT-alike licensed wordnet-derived sample thesaurus data
nss-3.14-8.fc19
---------------
* Sun Nov 04 2012 Elio Maldonado <emaldona(a)redhat.com> - 3.14-8
- Fix pk11wrap locking which fixes 'fedpkg new-sources' and 'fedpkg update' hangs
- Bug 872124 - nss-3.14 breaks fedpkg new-sources
- Fix should be considered preliminary since the patch may change upon upstream approval
openmpi-1.6.3-4.fc19
--------------------
* Mon Nov 05 2012 Orion Poplawski <orion(a)cora.nwra.com> 1.6.3-4
- Add patch to fix libmpi_f90.so version
- Add patch to link tests with system libltdl
- Run make check
openstack-swift-1.7.4-2.fc19
----------------------------
* Mon Nov 05 2012 Pete Zaitcev <zaitcev(a)redhat.com> - 1.7.4-2
- Add missing unit files bz#807170
* Thu Sep 27 2012 Derek Higgins <derekh(a)redhat.com> - 1.7.4-1
- Update to 1.7.4
pcs-0.9.27-3.fc19
-----------------
* Mon Nov 05 2012 Chris Feist <cfeist(a)redhat.com> - 0.9.27-3
- Build on all archs
* Thu Oct 25 2012 Chris Feist <cfeist(a)redhat.com> - 0.9.27-2
- Resync to latest version of pcs
- Added pcsd daemon
* Mon Oct 08 2012 Chris Feist <cfeist(a)redhat.cmo> - 0.9.26-1
- Resync to latest version of pcs
* Thu Sep 20 2012 Chris Feist <cfeist(a)redhat.cmo> - 0.9.24-1
- Resync to latest version of pcs
* Thu Sep 20 2012 Chris Feist <cfeist(a)redhat.cmo> - 0.9.23-1
- Resync to latest version of pcs
* Wed Sep 12 2012 Chris Feist <cfeist(a)redhat.cmo> - 0.9.22-1
- Resync to latest version of pcs
perl-5.16.2-242.fc19
--------------------
* Mon Nov 05 2012 Jitka Plesnikova <jplesnik(a)redhat.com> - 4:5.16.2-242
- 5.16.2 bump (see
http://search.cpan.org/dist/perl-5.16.1/pod/perldelta.pod for release
notes)
perl-AppConfig-1.66-18.fc19
---------------------------
* Mon Nov 05 2012 Jitka Plesnikova <jplesnik(a)redhat.com> - 1.66-18
- Specify all dependencies
- Use DESTDIR rather than PERL_INSTALL_ROOT
perl-DBD-CSV-0.36-2.fc19
------------------------
* Mon Nov 05 2012 Jitka Plesnikova <jplesnik(a)redhat.com> - 0.36-2
- Specify all dependencies
perl-Devel-Symdump-2.08-12.fc19
-------------------------------
* Mon Nov 05 2012 Marcela Mašláňová <mmaslano(a)redhat.com> - 1:2.08-12
- Add missing requirement - Exporter
perl-Hardware-Verilog-Parser-0.13-12.fc19
-----------------------------------------
* Mon Nov 05 2012 Paul Howarth <paul(a)city-fan.org> - 0.13-12
- Fix FTBFS due to typos in grammar (#839599)
- Fix "Use of uninitialized value in array dereference" (CPAN RT#51080)
- Filter bogus requires/provides of PrecompiledParser
- BR: perl(Data::Dumper)
- Use DESTDIR rather than PERL_INSTALL_ROOT
- Don't need to remove empty directories from the buildroot
- Make %files list more explicit
- Drop %defattr, redundant since rpm 4.4
- Don't use macros for commands
* Fri Jul 20 2012 Fedora Release Engineering <rel-eng(a)lists.fedoraproject.org> - 0.13-11
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
* Sat Jun 16 2012 Petr Pisar <ppisar(a)redhat.com> - 0.13-10
- Perl 5.16 rebuild
perl-Image-ExifTool-9.04-1.fc19
-------------------------------
* Mon Nov 05 2012 Tom Callaway <spot(a)fedoraproject.org> - 9.04-1
- update to 9.04 (stable)
perl-Sys-CPU-0.52-2.fc19
------------------------
* Mon Nov 05 2012 Petr Pisar <ppisar(a)redhat.com> - 0.52-2
- Add support for s390 (CPAN RT #80633)
perl-Sys-MemInfo-0.91-5.fc19
----------------------------
* Mon Nov 05 2012 Petr Pisar <ppisar(a)redhat.com> - 0.91-5
- Change license from (LGPLv2+) to ((GPLv1+ or Artistic) and LGPLv2+)
(CPAN RT #80636)
* Mon Nov 05 2012 Petr Pisar <ppisar(a)redhat.com> - 0.91-4
- Improve description
- Specify all dependencies
perl-Text-CSV_XS-0.91-2.fc19
----------------------------
* Mon Nov 05 2012 Petr Pisar <ppisar(a)redhat.com> - 0.91-2
- Correct dependencies
perl-X11-Protocol-Other-21-1.fc19
---------------------------------
* Mon Nov 05 2012 Petr Šabata <contyk(a)redhat.com> - 21-1
- 21 bump
- Fix the deps
- Modernize the spec a bit
- Package the examples
perl-XML-LibXML-2.0010-1.fc19
-----------------------------
* Mon Nov 05 2012 Petr Šabata <contyk(a)redhat.com> - 1:2.0010-1
- 2.0010 bumpity
php-5.4.8-4.fc19
----------------
* Mon Nov 05 2012 Remi Collet <rcollet(a)redhat.com> 5.4.8-4
- fix mysql_sock macro definition
php-phpunit-PHPUnit-MockObject-1.2.2-1.fc19
-------------------------------------------
* Mon Nov 05 2012 Remi Collet <remi(a)fedoraproject.org> - 1.2.2-1
- Version 1.2.2 (stable) - API 1.2.0 (stable)
php-zmq-0.6.0-8.20120613git516bd6f.fc19
---------------------------------------
* Mon Nov 05 2012 Ralph Bean <rbean(a)redhat.com> - 0.6.0-8.20120613git516bd6f
- Add ABI check to conform with PHP guidelines.
policycoreutils-2.1.13-25.fc19
------------------------------
* Mon Nov 05 2012 Dan Walsh <dwalsh(a)redhat.com> - 2.1.12-25
- Remove run_init, no longer needed with systemd.
- Fix sepolicy generate to not include subdirs in generated fcontext file. (mgrepl patch)
python-django-devserver-0.4.0-1.fc19
------------------------------------
* Mon Nov 05 2012 Bohuslav Kabrda <bkabrda(a)redhat.com> - 0.4.0-1
- Update to 0.4.0.
python-django-openstack-auth-1.0.3-1.fc19
-----------------------------------------
* Mon Nov 05 2012 Matthias Runge <mrunge(a)redhat.com> - 1.0.3-1
- update latest upstream version 1.0.3
* Tue Oct 16 2012 Matthias Runge <mrunge(a)redhat.com> - 1.0.2-3
- fix build on EPEL6, require Django14 package on EPEL6
- handle languages by hand on EL6
python-flexmock-0.9.6-1.fc19
----------------------------
* Mon Nov 05 2012 Bohuslav Kabrda <bkabrda(a)redhat.com> - 0.9.6-1
- Update to 0.9.6.
python-http-parser-0.7.12-1.fc19
--------------------------------
* Mon Nov 05 2012 Bohuslav Kabrda <bkabrda(a)redhat.com> - 0.7.12-1
- Update to 0.7.12.
python-plumbum-1.0.1-1.fc19
---------------------------
* Mon Nov 05 2012 Bohuslav Kabrda <bkabrda(a)redhat.com> - 1.0.1-1
- Update to 1.0.1.
python-restkit-4.2.0-1.fc19
---------------------------
* Mon Nov 05 2012 Bohuslav Kabrda <bkabrda(a)redhat.com> - 4.2.0-1
- Update to 4.2.0.
python-rpyc-3.2.2-1.fc19
------------------------
* Mon Nov 05 2012 Bohuslav Kabrda <bkabrda(a)redhat.com> - 3.2.2-1
- Update to 3.2.2.
- Specfile cleanup.
python-socketpool-0.5.2-1.fc19
------------------------------
* Mon Nov 05 2012 Bohuslav Kabrda <bkabrda(a)redhat.com> - 0.5.2-1
- Update to 0.5.2.
python-sure-1.0.6-1.fc19
------------------------
* Mon Nov 05 2012 Bohuslav Kabrda <bkabrda(a)redhat.com> - 1.0.6-1
- Update to 1.0.6.
rubygem-delorean-2.0.0-1.fc19
-----------------------------
* Mon Nov 05 2012 Bohuslav Kabrda <bkabrda(a)redhat.com> - 2.0.0-1
- Update to version 2.0.0.
rubygem-formatador-0.2.4-1.fc19
-------------------------------
* Mon Nov 05 2012 Bohuslav Kabrda <bkabrda(a)redhat.com> - 0.2.4-1
- Update to 0.2.4.
rubygem-rack-1.4.1-2.fc19
-------------------------
* Thu Nov 01 2012 Vít Ondruch <vondruch(a)redhat.com> - 1:1.4.1-2
- Fixed epoch in -doc sub-package.
rubygem-ruby-dbus-0.8.0-1.fc19
------------------------------
* Mon Nov 05 2012 Bohuslav Kabrda <bkabrda(a)redhat.com> - 0.8.0-1
- Update to 0.8.0.
rubygem-slop-3.3.3-1.fc19
-------------------------
* Mon Nov 05 2012 Bohuslav Kabrda <bkabrda(a)redhat.com> - 3.3.3-1
- Update to slop 3.3.3.
rubygem-uglifier-1.3.0-1.fc19
-----------------------------
* Mon Nov 05 2012 Josef Stribny <jstribny(a)redhat.com> - 1.3.0-1
- Update to 1.3.0
samba-4.0.0-165.fc19.rc4
------------------------
* Mon Nov 05 2012 - Andreas Schneider <asn(a)redhat.com> - 2:4.0.0-165.rc4
- Fix library dependencies of libnetapi.
* Mon Nov 05 2012 - Andreas Schneider <asn(a)redhat.com> - 2:4.0.0-164.rc4
- resolves: #872818 - Fix perl dependencies.
squid-3.2.3-3.fc19
------------------
* Mon Nov 05 2012 Michal Luscon <mluscon(a)redhat.com> - 7:3.2.3-3
- Resolved: #71483 - httpd 2.4 requires new configuration directives
* Fri Oct 26 2012 Michal Luscon <mluscon(a)redhat.com> - 7:3.2.3-2
- Resolved: #854356 - squid.service use PIDFile
- Resolved: #859393 - Improve cache_swap script
- Resolved: #791129 - disk space warning
- Resolved: #862252 - reload on VPN or network up/down
- Resolved: #867531 - run test suite during build
- Resolved: #832684 - missing after dependency nss-lookup.target
- Removed obsolete configure options
st-0.3-1.fc19
-------------
* Mon Nov 05 2012 Petr Šabata <contyk(a)redhat.com> - 0.3-1
- 0.3 bump
- Switch to Xft
- Our terminfo should now be a part of ncurses; do not require ncurses-term
- Update source URL
suricata-1.3.3-1.fc19
---------------------
* Mon Nov 05 2012 Steve Grubb <sgrubb(a)redhat.com> 1.3.3-1
- New upstream release
systemtap-2.1-0.75.g02bff02.fc19
--------------------------------
* Mon Nov 05 2012 Lukas Berk <lberk(a)redhat.com> - 2.1-0.75.g02bff02
- Automated weekly rawhide release
tzdata-2012i-1.fc19
-------------------
* Mon Nov 05 2012 Petr Machata <pmachata(a)redhat.com> - 2012i-1
- Upstream 2012i
- Cuba switched to DST
* Mon Nov 05 2012 Petr Machata <pmachata(a)redhat.com> - 2012h-2
- Switch back to using system zic, ignore upstream Makefile at all.
We do so for java anyway.
- Drop Factory from distribution
unoconv-0.6-1.fc19
------------------
* Mon Nov 05 2012 David Tardon <dtardon(a)redhat.com> - 0.6-1
- new upstream release
zathura-0.2.1-1.fc19
--------------------
* Mon Nov 05 2012 Kevin Fenzi <kevin(a)scrye.com> 0.2.1-1
- Update to 0.2.1
Summary:
Added Packages: 5
Removed Packages: 0
Upgraded Packages: 79
Compose finisheded at Tue Nov 6 13:30:07 UTC 2012
11 years, 5 months
- 1
- 0
F-18 Branched report: 20121106 changes
by Fedora compose checker
Compose started at Tue Nov 6 09:15:33 UTC 2012
Broken deps for x86_64
----------------------------------------------------------
[dhcp-forwarder]
dhcp-forwarder-upstart-0.10-1801.fc18.noarch requires /sbin/initctl
[dnf]
dnf-0.2.14-2.git4831982.fc18.noarch requires python-hawkey >= 0:0.3.0
[dustmite]
dustmite-1-5.20120304gitcde46e0.fc17.x86_64 requires libphobos-ldc.so.59()(64bit)
[func]
func-0.28-1.fc17.noarch requires smolt
[gcc-python-plugin]
gcc-python2-debug-plugin-0.9-5.fc18.x86_64 requires gcc = 0:4.7.2-2.fc18
gcc-python2-plugin-0.9-5.fc18.x86_64 requires gcc = 0:4.7.2-2.fc18
gcc-python3-debug-plugin-0.9-5.fc18.x86_64 requires gcc = 0:4.7.2-2.fc18
gcc-python3-plugin-0.9-5.fc18.x86_64 requires gcc = 0:4.7.2-2.fc18
[gdb-heap]
gdb-heap-0.5-9.fc18.x86_64 requires glibc(x86-64) = 0:2.15
[gnome-do-plugins]
gnome-do-plugins-banshee-0.8.4-10.fc18.x86_64 requires mono(Banshee.CollectionIndexer) = 0:2.4.0.0
[gnome-shell-theme-selene]
gnome-shell-theme-selene-3.4.0-5.fc18.noarch requires gnome-shell-extensions-user-theme
[ip-sentinel]
ip-sentinel-upstart-0.12-1303.fc18.noarch requires /sbin/initctl
[libsyncml]
1:libsyncml-0.4.6-4.fc17.i686 requires libsoup-2.2.so.8
1:libsyncml-0.4.6-4.fc17.x86_64 requires libsoup-2.2.so.8()(64bit)
[mapserver]
mapserver-perl-6.0.1-5.fc17.x86_64 requires perl(:MODULE_COMPAT_5.14.2)
[milter-greylist]
milter-greylist-upstart-4.2.7-1701.fc18.noarch requires /sbin/initctl
[mod_pubcookie]
mod_pubcookie-3.3.4a-7.fc18.x86_64 requires httpd-mmn = 0:20051115-x86-64
[openvrml]
libopenvrml-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
libopenvrml-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
libopenvrml-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
libopenvrml-gl-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
libopenvrml-gl-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-java-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-java-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-java-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-javascript-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-javascript-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-javascript-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-nodes-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-nodes-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-nodes-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-xembed-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-xembed-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-xembed-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
[perl-Hardware-Verilog-Parser]
perl-Hardware-Verilog-Parser-0.13-9.fc17.noarch requires perl(:MODULE_COMPAT_5.14.2)
[perl-OpenOffice-UNO]
perl-OpenOffice-UNO-0.07-3.fc17.x86_64 requires perl(:MODULE_COMPAT_5.14.2)
[presence]
presence-0.4.6-2.fc18.x86_64 requires libcogl.so.9()(64bit)
[pyfuzzy]
pyfuzzy-0.1.0-5.fc18.noarch requires antlr3-python
[reciteword]
reciteword-0.8.4-10.fc18.x86_64 requires esound
[resource-agents]
resource-agents-3.9.2-3.fc18.5.x86_64 requires libplumbgpl.so.2()(64bit)
resource-agents-3.9.2-3.fc18.5.x86_64 requires libplumb.so.2()(64bit)
[ruby-revolution]
ruby-revolution-0.5-4.svn210.fc18.15.x86_64 requires libedataserver-1.2.so.16()(64bit)
ruby-revolution-0.5-4.svn210.fc18.15.x86_64 requires libecal-1.2.so.12()(64bit)
ruby-revolution-0.5-4.svn210.fc18.15.x86_64 requires libebook-1.2.so.13()(64bit)
[rubygem-activeldap]
rubygem-activeldap-1.2.2-3.fc17.noarch requires rubygem(gettext_activerecord) >= 0:2.1.0
rubygem-activeldap-1.2.2-3.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-calendar_date_select]
rubygem-calendar_date_select-1.15-6.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-linecache]
rubygem-linecache-0.43-5.fc17.x86_64 requires ruby(abi) = 0:1.8
rubygem-linecache-0.43-5.fc17.x86_64 requires libruby.so.1.8()(64bit)
[rubygem-ruby-debug]
rubygem-ruby-debug-0.10.5-0.3.rc1.fc17.1.noarch requires ruby(abi) = 0:1.8
[rubygem-ruby-debug-base]
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.x86_64 requires ruby(abi) = 0:1.8
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.x86_64 requires libruby.so.1.8()(64bit)
[sugar-flip]
sugar-flip-5-2.fc18.noarch requires sugar >= 0:0.98.0
[tncfhh]
tncfhh-examples-0.8.3-8.fc18.i686 requires libboost_thread-mt.so.1.48.0
tncfhh-examples-0.8.3-8.fc18.i686 requires libboost_system-mt.so.1.48.0
tncfhh-examples-0.8.3-8.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
tncfhh-examples-0.8.3-8.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
tncfhh-libs-0.8.3-8.fc18.i686 requires libboost_thread-mt.so.1.48.0
tncfhh-libs-0.8.3-8.fc18.i686 requires libboost_system-mt.so.1.48.0
tncfhh-libs-0.8.3-8.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
tncfhh-libs-0.8.3-8.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
[vigra]
vigra-python-1.8.0-5.fc18.x86_64 requires libboost_python-mt.so.1.48.0()(64bit)
[znc-infobot]
znc-infobot-0.206-2.fc18.x86_64 requires znc = 0:0.206
Broken deps for i386
----------------------------------------------------------
[dhcp-forwarder]
dhcp-forwarder-upstart-0.10-1801.fc18.noarch requires /sbin/initctl
[dnf]
dnf-0.2.14-2.git4831982.fc18.noarch requires python-hawkey >= 0:0.3.0
[dustmite]
dustmite-1-5.20120304gitcde46e0.fc17.i686 requires libphobos-ldc.so.59
[func]
func-0.28-1.fc17.noarch requires smolt
[gcc-python-plugin]
gcc-python2-debug-plugin-0.9-5.fc18.i686 requires gcc = 0:4.7.2-2.fc18
gcc-python2-plugin-0.9-5.fc18.i686 requires gcc = 0:4.7.2-2.fc18
gcc-python3-debug-plugin-0.9-5.fc18.i686 requires gcc = 0:4.7.2-2.fc18
gcc-python3-plugin-0.9-5.fc18.i686 requires gcc = 0:4.7.2-2.fc18
[gdb-heap]
gdb-heap-0.5-9.fc18.i686 requires glibc(x86-32) = 0:2.15
[gnome-do-plugins]
gnome-do-plugins-banshee-0.8.4-10.fc18.i686 requires mono(Banshee.CollectionIndexer) = 0:2.4.0.0
[gnome-shell-theme-selene]
gnome-shell-theme-selene-3.4.0-5.fc18.noarch requires gnome-shell-extensions-user-theme
[ip-sentinel]
ip-sentinel-upstart-0.12-1303.fc18.noarch requires /sbin/initctl
[libsyncml]
1:libsyncml-0.4.6-4.fc17.i686 requires libsoup-2.2.so.8
[mapserver]
mapserver-perl-6.0.1-5.fc17.i686 requires perl(:MODULE_COMPAT_5.14.2)
[milter-greylist]
milter-greylist-upstart-4.2.7-1701.fc18.noarch requires /sbin/initctl
[mod_pubcookie]
mod_pubcookie-3.3.4a-7.fc18.i686 requires httpd-mmn = 0:20051115-x86-32
[openvrml]
libopenvrml-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-java-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-java-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-java-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-javascript-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-javascript-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-javascript-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-nodes-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-nodes-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-nodes-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-xembed-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-xembed-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-xembed-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
[perl-Hardware-Verilog-Parser]
perl-Hardware-Verilog-Parser-0.13-9.fc17.noarch requires perl(:MODULE_COMPAT_5.14.2)
[perl-OpenOffice-UNO]
perl-OpenOffice-UNO-0.07-3.fc17.i686 requires perl(:MODULE_COMPAT_5.14.2)
perl-OpenOffice-UNO-0.07-3.fc17.i686 requires libsal_textenc.so
[presence]
presence-0.4.6-2.fc18.i686 requires libcogl.so.9
[pyfuzzy]
pyfuzzy-0.1.0-5.fc18.noarch requires antlr3-python
[reciteword]
reciteword-0.8.4-10.fc18.i686 requires esound
[resource-agents]
resource-agents-3.9.2-3.fc18.5.i686 requires libplumbgpl.so.2
resource-agents-3.9.2-3.fc18.5.i686 requires libplumb.so.2
[ruby-revolution]
ruby-revolution-0.5-4.svn210.fc18.15.i686 requires libedataserver-1.2.so.16
ruby-revolution-0.5-4.svn210.fc18.15.i686 requires libecal-1.2.so.12
ruby-revolution-0.5-4.svn210.fc18.15.i686 requires libebook-1.2.so.13
[rubygem-activeldap]
rubygem-activeldap-1.2.2-3.fc17.noarch requires rubygem(gettext_activerecord) >= 0:2.1.0
rubygem-activeldap-1.2.2-3.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-calendar_date_select]
rubygem-calendar_date_select-1.15-6.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-linecache]
rubygem-linecache-0.43-5.fc17.i686 requires ruby(abi) = 0:1.8
rubygem-linecache-0.43-5.fc17.i686 requires libruby.so.1.8
[rubygem-ruby-debug]
rubygem-ruby-debug-0.10.5-0.3.rc1.fc17.1.noarch requires ruby(abi) = 0:1.8
[rubygem-ruby-debug-base]
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.i686 requires ruby(abi) = 0:1.8
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.i686 requires libruby.so.1.8
[sugar-flip]
sugar-flip-5-2.fc18.noarch requires sugar >= 0:0.98.0
[tncfhh]
tncfhh-examples-0.8.3-8.fc18.i686 requires libboost_thread-mt.so.1.48.0
tncfhh-examples-0.8.3-8.fc18.i686 requires libboost_system-mt.so.1.48.0
tncfhh-libs-0.8.3-8.fc18.i686 requires libboost_thread-mt.so.1.48.0
tncfhh-libs-0.8.3-8.fc18.i686 requires libboost_system-mt.so.1.48.0
[vigra]
vigra-python-1.8.0-5.fc18.i686 requires libboost_python-mt.so.1.48.0
[znc-infobot]
znc-infobot-0.206-2.fc18.i686 requires znc = 0:0.206
Summary:
Added Packages: 0
Removed Packages: 0
Upgraded Packages: 0
Compose finished at Tue Nov 6 12:37:28 UTC 2012
11 years, 5 months
- 1
- 0
[Test-Announce] Fedora 18 Beta Go/No-Go Meeting, Thursday, November 08 @ 19:00 UTC (2pm Eastern, 11am Pacific)
by Jaroslav Reznik
Join us on irc.freenode.net in #fedora-meeting-1 for this important
meeting, wherein we shall determine the readiness of the Fedora 18 Beta.
Thursday, November 08, 2012 @19:00 UTC (14:00 EST/11:00 PST/20:00 CET)
"Before each public release Development, QA and Release Engineering meet
to determine if the release criteria are met for a particular release.
This meeting is called the Go/No-Go Meeting."
"Verifying that the Release criteria are met is the responsibility of
the QA Team."
For more details about this meeting see:
https://fedoraproject.org/wiki/Go_No_Go_Meeting
In the meantime, keep an eye on the Fedora 18 Beta Blocker list:
http://qa.fedoraproject.org/blockerbugs/milestone/18/beta/buglist
Btw. please check time against UTC as we are in the daylight/standard
saving time change period...
_______________________________________________
test-announce mailing list
test-announce(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/test-announce
11 years, 5 months
- 1
- 0
A question about system-config-* tools
by MANIK BAJPAI
Hi,
I have developed a small s390 (System z/mainframe) specific
utility that allows the user to configure the stand-alone or a "VM" kind
of dump. This is somewhat similar to system-config-kdump, but this is
not a 'kdump' tool. I just wanted to know if I can contribute it as a
patch to the system-config-kdump tool, where the s390 specific part will
not show up on other architectures.
--
-With regards,
Manik Bajpai.
IBM Systems & Technology Labs,
D Block, 6th Floor,
Embassy Golf Links Business Park,
Bangalore 560071, INDIA
Email (Read opposite) : MOC MBI TENV XUNIL ta pjabinam
11 years, 5 months
- 2
- 1
Any issue with fedpkg new-sources?
by Bruno Wolff III
Hans and I have been having a problem uploading the source for the
new version of hegdewars to the lookaside cache. There is some initial
network traffic, but then things hang.
Has anybody successfully uploaded a new file to the lookaside cache in
about the last 12 hours?
11 years, 5 months
- 3
- 4
F-18 Branched report: 20121031 changes
by Fedora compose checker
Compose started at Wed Oct 31 09:15:24 UTC 2012
Broken deps for x86_64
----------------------------------------------------------
[dhcp-forwarder]
dhcp-forwarder-upstart-0.10-1801.fc18.noarch requires /sbin/initctl
[dnf]
dnf-0.2.14-2.git4831982.fc18.noarch requires python-hawkey >= 0:0.3.0
[dustmite]
dustmite-1-5.20120304gitcde46e0.fc17.x86_64 requires libphobos-ldc.so.59()(64bit)
[func]
func-0.28-1.fc17.noarch requires smolt
[gcc-python-plugin]
gcc-python2-debug-plugin-0.9-5.fc18.x86_64 requires gcc = 0:4.7.2-2.fc18
gcc-python2-plugin-0.9-5.fc18.x86_64 requires gcc = 0:4.7.2-2.fc18
gcc-python3-debug-plugin-0.9-5.fc18.x86_64 requires gcc = 0:4.7.2-2.fc18
gcc-python3-plugin-0.9-5.fc18.x86_64 requires gcc = 0:4.7.2-2.fc18
[gdb-heap]
gdb-heap-0.5-9.fc18.x86_64 requires glibc(x86-64) = 0:2.15
[gnome-do-plugins]
gnome-do-plugins-banshee-0.8.4-10.fc18.x86_64 requires mono(Banshee.CollectionIndexer) = 0:2.4.0.0
[gnome-shell-theme-selene]
gnome-shell-theme-selene-3.4.0-5.fc18.noarch requires gnome-shell-extensions-user-theme
[ip-sentinel]
ip-sentinel-upstart-0.12-1303.fc18.noarch requires /sbin/initctl
[libsyncml]
1:libsyncml-0.4.6-4.fc17.i686 requires libsoup-2.2.so.8
1:libsyncml-0.4.6-4.fc17.x86_64 requires libsoup-2.2.so.8()(64bit)
[mapserver]
mapserver-perl-6.0.1-5.fc17.x86_64 requires perl(:MODULE_COMPAT_5.14.2)
[milter-greylist]
milter-greylist-upstart-4.2.7-1701.fc18.noarch requires /sbin/initctl
[mod_pubcookie]
mod_pubcookie-3.3.4a-7.fc18.x86_64 requires httpd-mmn = 0:20051115-x86-64
[openvrml]
libopenvrml-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
libopenvrml-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
libopenvrml-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
libopenvrml-gl-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
libopenvrml-gl-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-java-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-java-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-java-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-javascript-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-javascript-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-javascript-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-nodes-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-nodes-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-nodes-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
openvrml-xembed-0.18.9-3.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
openvrml-xembed-0.18.9-3.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
openvrml-xembed-0.18.9-3.fc18.x86_64 requires libboost_filesystem-mt.so.1.48.0()(64bit)
[perl-Hardware-Verilog-Parser]
perl-Hardware-Verilog-Parser-0.13-9.fc17.noarch requires perl(:MODULE_COMPAT_5.14.2)
[perl-OpenOffice-UNO]
perl-OpenOffice-UNO-0.07-3.fc17.x86_64 requires perl(:MODULE_COMPAT_5.14.2)
[presence]
presence-0.4.6-2.fc18.x86_64 requires libcogl.so.9()(64bit)
[pyfuzzy]
pyfuzzy-0.1.0-5.fc18.noarch requires antlr3-python
[reciteword]
reciteword-0.8.4-10.fc18.x86_64 requires esound
[resource-agents]
resource-agents-3.9.2-3.fc18.5.x86_64 requires libplumbgpl.so.2()(64bit)
resource-agents-3.9.2-3.fc18.5.x86_64 requires libplumb.so.2()(64bit)
[ruby-revolution]
ruby-revolution-0.5-4.svn210.fc18.15.x86_64 requires libedataserver-1.2.so.16()(64bit)
ruby-revolution-0.5-4.svn210.fc18.15.x86_64 requires libecal-1.2.so.12()(64bit)
ruby-revolution-0.5-4.svn210.fc18.15.x86_64 requires libebook-1.2.so.13()(64bit)
[rubygem-activeldap]
rubygem-activeldap-1.2.2-3.fc17.noarch requires rubygem(gettext_activerecord) >= 0:2.1.0
rubygem-activeldap-1.2.2-3.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-calendar_date_select]
rubygem-calendar_date_select-1.15-6.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-linecache]
rubygem-linecache-0.43-5.fc17.x86_64 requires ruby(abi) = 0:1.8
rubygem-linecache-0.43-5.fc17.x86_64 requires libruby.so.1.8()(64bit)
[rubygem-ruby-debug]
rubygem-ruby-debug-0.10.5-0.3.rc1.fc17.1.noarch requires ruby(abi) = 0:1.8
[rubygem-ruby-debug-base]
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.x86_64 requires ruby(abi) = 0:1.8
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.x86_64 requires libruby.so.1.8()(64bit)
[sugar-flip]
sugar-flip-5-2.fc18.noarch requires sugar >= 0:0.98.0
[tncfhh]
tncfhh-examples-0.8.3-8.fc18.i686 requires libboost_thread-mt.so.1.48.0
tncfhh-examples-0.8.3-8.fc18.i686 requires libboost_system-mt.so.1.48.0
tncfhh-examples-0.8.3-8.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
tncfhh-examples-0.8.3-8.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
tncfhh-libs-0.8.3-8.fc18.i686 requires libboost_thread-mt.so.1.48.0
tncfhh-libs-0.8.3-8.fc18.i686 requires libboost_system-mt.so.1.48.0
tncfhh-libs-0.8.3-8.fc18.x86_64 requires libboost_thread-mt.so.1.48.0()(64bit)
tncfhh-libs-0.8.3-8.fc18.x86_64 requires libboost_system-mt.so.1.48.0()(64bit)
[vigra]
vigra-python-1.8.0-5.fc18.x86_64 requires libboost_python-mt.so.1.48.0()(64bit)
[znc-infobot]
znc-infobot-0.206-2.fc18.x86_64 requires znc = 0:0.206
Broken deps for i386
----------------------------------------------------------
[dhcp-forwarder]
dhcp-forwarder-upstart-0.10-1801.fc18.noarch requires /sbin/initctl
[dnf]
dnf-0.2.14-2.git4831982.fc18.noarch requires python-hawkey >= 0:0.3.0
[dustmite]
dustmite-1-5.20120304gitcde46e0.fc17.i686 requires libphobos-ldc.so.59
[func]
func-0.28-1.fc17.noarch requires smolt
[gcc-python-plugin]
gcc-python2-debug-plugin-0.9-5.fc18.i686 requires gcc = 0:4.7.2-2.fc18
gcc-python2-plugin-0.9-5.fc18.i686 requires gcc = 0:4.7.2-2.fc18
gcc-python3-debug-plugin-0.9-5.fc18.i686 requires gcc = 0:4.7.2-2.fc18
gcc-python3-plugin-0.9-5.fc18.i686 requires gcc = 0:4.7.2-2.fc18
[gdb-heap]
gdb-heap-0.5-9.fc18.i686 requires glibc(x86-32) = 0:2.15
[gnome-do-plugins]
gnome-do-plugins-banshee-0.8.4-10.fc18.i686 requires mono(Banshee.CollectionIndexer) = 0:2.4.0.0
[gnome-shell-theme-selene]
gnome-shell-theme-selene-3.4.0-5.fc18.noarch requires gnome-shell-extensions-user-theme
[ip-sentinel]
ip-sentinel-upstart-0.12-1303.fc18.noarch requires /sbin/initctl
[libsyncml]
1:libsyncml-0.4.6-4.fc17.i686 requires libsoup-2.2.so.8
[mapserver]
mapserver-perl-6.0.1-5.fc17.i686 requires perl(:MODULE_COMPAT_5.14.2)
[milter-greylist]
milter-greylist-upstart-4.2.7-1701.fc18.noarch requires /sbin/initctl
[mod_pubcookie]
mod_pubcookie-3.3.4a-7.fc18.i686 requires httpd-mmn = 0:20051115-x86-32
[openvrml]
libopenvrml-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
libopenvrml-gl-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-java-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-java-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-java-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-javascript-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-javascript-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-javascript-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-nodes-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-nodes-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-nodes-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
openvrml-xembed-0.18.9-3.fc18.i686 requires libboost_thread-mt.so.1.48.0
openvrml-xembed-0.18.9-3.fc18.i686 requires libboost_system-mt.so.1.48.0
openvrml-xembed-0.18.9-3.fc18.i686 requires libboost_filesystem-mt.so.1.48.0
[perl-Hardware-Verilog-Parser]
perl-Hardware-Verilog-Parser-0.13-9.fc17.noarch requires perl(:MODULE_COMPAT_5.14.2)
[perl-OpenOffice-UNO]
perl-OpenOffice-UNO-0.07-3.fc17.i686 requires perl(:MODULE_COMPAT_5.14.2)
perl-OpenOffice-UNO-0.07-3.fc17.i686 requires libsal_textenc.so
[presence]
presence-0.4.6-2.fc18.i686 requires libcogl.so.9
[pyfuzzy]
pyfuzzy-0.1.0-5.fc18.noarch requires antlr3-python
[reciteword]
reciteword-0.8.4-10.fc18.i686 requires esound
[resource-agents]
resource-agents-3.9.2-3.fc18.5.i686 requires libplumbgpl.so.2
resource-agents-3.9.2-3.fc18.5.i686 requires libplumb.so.2
[ruby-revolution]
ruby-revolution-0.5-4.svn210.fc18.15.i686 requires libedataserver-1.2.so.16
ruby-revolution-0.5-4.svn210.fc18.15.i686 requires libecal-1.2.so.12
ruby-revolution-0.5-4.svn210.fc18.15.i686 requires libebook-1.2.so.13
[rubygem-activeldap]
rubygem-activeldap-1.2.2-3.fc17.noarch requires rubygem(gettext_activerecord) >= 0:2.1.0
rubygem-activeldap-1.2.2-3.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-calendar_date_select]
rubygem-calendar_date_select-1.15-6.fc17.noarch requires ruby(abi) = 0:1.8
[rubygem-linecache]
rubygem-linecache-0.43-5.fc17.i686 requires ruby(abi) = 0:1.8
rubygem-linecache-0.43-5.fc17.i686 requires libruby.so.1.8
[rubygem-ruby-debug]
rubygem-ruby-debug-0.10.5-0.3.rc1.fc17.1.noarch requires ruby(abi) = 0:1.8
[rubygem-ruby-debug-base]
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.i686 requires ruby(abi) = 0:1.8
rubygem-ruby-debug-base-0.10.5-0.1.rc1.fc17.1.i686 requires libruby.so.1.8
[sugar-flip]
sugar-flip-5-2.fc18.noarch requires sugar >= 0:0.98.0
[tncfhh]
tncfhh-examples-0.8.3-8.fc18.i686 requires libboost_thread-mt.so.1.48.0
tncfhh-examples-0.8.3-8.fc18.i686 requires libboost_system-mt.so.1.48.0
tncfhh-libs-0.8.3-8.fc18.i686 requires libboost_thread-mt.so.1.48.0
tncfhh-libs-0.8.3-8.fc18.i686 requires libboost_system-mt.so.1.48.0
[vigra]
vigra-python-1.8.0-5.fc18.i686 requires libboost_python-mt.so.1.48.0
[znc-infobot]
znc-infobot-0.206-2.fc18.i686 requires znc = 0:0.206
Removed package: lcdf-typetools-2.95-1.fc18
Summary:
Added Packages: 0
Removed Packages: 1
Upgraded Packages: 0
Compose finished at Wed Oct 31 12:56:39 UTC 2012
11 years, 5 months
- 6
- 6
Re: Rolling release model philosophy (was Re: Anaconda is totally trashing the F18 schedule (was Re: f18: how to install into a LVM partitions (or RAID)))
by Kamil Paral
> >> This tool is still not going to be able to do magic and there will
> >> be
> >> config
> >> things that still need to be redone. Third party repos will still
> >> be
> >> an issue.
> >
> >It's a clean installation, I don't think it needs any magic. Also
> >third-party repos are not a problem, we just ignore them and they
> >won't influence the new system. People will add them manually again
> >once in 18 months.
>
> There is desktop config in people's home directories that may not
> work with
> updated packages as expected.
Package updates don't touch your /home. Clean install is the same as package updates in these regards.
>
> Custom configuation done in /etc is lost.
>
> How do they get the packages from the third party repos reinstalled?
> Fedora will probably be limited in doing this in a fully automated
> way,
> since there are legal issues.
>
Please read my email again:
> ** Power users would have to manually transfer /etc changes, add custom repos, etc. But if you need to do that only once every 18 months, it's not so bad. Also, a lot of power users would use Fedora Rolling instead, so they would not be affected at all. Some power users can even do unsupported yum upgrades (as many of them do now), so they won't be affected by it either.
It wouldn't be done automatically, no. All this stuff would have to be setup again manually. But that's just my view.
11 years, 5 months
- 3
- 2