Packaging problem

Hello,

I've got a problem with a package.
I am trying to clean up a spec file before sending it to review and I've got an
error:

erreur : Empty %files file
/home/artelys/rpmbuild/BUILD/jamulus-c6b6e3ab02d7ec1e93edeeb8042a89a561924826/debugsourcefiles.list

The code is Qt-5 / c++. It's an application which allows to perform live rehearsale
via an internet connection.

On the gcc / c++ command line, I can see the -g flags.

The build section:

%{set_build_flags}

%_qt5_qmake Jamulus.pro CONFIG+=opus_shared_lib

%make_build VERBOSE=1

The install section (the qmake file defines no install rule so I must install everything
manually):

%__install -m 755 -d %{buildroot}/%{_bindir}/
%__install -m 755 Jamulus %{buildroot}%{_bindir}/jamulus

%__install -m 755 -d %{buildroot}/%{_datadir}/applications/
%__install -m 644 distributions/jamulus.desktop %{buildroot}%{_datadir}/applications/

%__install -m 755 -d %{buildroot}/%{_datadir}/pixmaps/
%__install -m 644 distributions/jamulus.png %{buildroot}%{_datadir}/pixmaps/

How can I build the debug part of the package ?

The only solution I've found is to add:

%global debug_package %{nil}

At the beginning of the spec file ...

Best regards,

YC

[Björn 'besser82' Esser]

Am Samstag, den 30.05.2020, 21:20 +0200 schrieb
ycollette.nospam(a)free.fr:
>  Hello,
>  
>  I've got a problem with a package.
>  I am trying to clean up a spec file before sending it to review and
>  I've got an error:
>  
>  erreur : Empty %files file /home/artelys/rpmbuild/BUILD/jamulus-
>  c6b6e3ab02d7ec1e93edeeb8042a89a561924826/debugsourcefiles.list
>  
>  The code is Qt-5 / c++. It's an application which allows to perform
>  live rehearsale via an internet connection.
>  
>  On the gcc / c++ command line, I can see the -g flags.
>  
>  The build section:
>  
>  %{set_build_flags}
>  
>  %_qt5_qmake Jamulus.pro CONFIG+=opus_shared_lib
>  
>  %make_build VERBOSE=1
>  
>  The install section (the qmake file defines no install rule so I must
>  install everything manually):
>  
>  %__install -m 755 -d %{buildroot}/%{_bindir}/
>  %__install -m 755 Jamulus %{buildroot}%{_bindir}/jamulus
>  
>  %__install -m 755 -d %{buildroot}/%{_datadir}/applications/
>  %__install -m 644 distributions/jamulus.desktop
>  %{buildroot}%{_datadir}/applications/
>  
>  %__install -m 755 -d %{buildroot}/%{_datadir}/pixmaps/
>  %__install -m 644 distributions/jamulus.png
>  %{buildroot}%{_datadir}/pixmaps/
>  
>  How can I build the debug part of the package ?
>  
>  The only solution I've found is to add:
>  
>  %global debug_package %{nil}
>  
>  At the beginning of the spec file ... 

Without a scratch build and/or a link to the spec file / srpm its hard
to help, I guess…

Cheers
Björn

Yes, you're right :)

Here is a link to a build with the %global debug_package %{nil} :

https://download.copr.fedorainfracloud.org/results/ycollet/linuxmao/fedor...

----- Mail original -----
De: "Björn 'besser82' Esser" <besser82(a)fedoraproject.org&gt;
À: "Development discussions related to Fedora"
<devel(a)lists.fedoraproject.org&gt;
Envoyé: Samedi 30 Mai 2020 21:44:08
Objet: Re: Packaging problem

Am Samstag, den 30.05.2020, 21:20 +0200 schrieb
ycollette.nospam(a)free.fr:
>  Hello,
>  
>  I've got a problem with a package.
>  I am trying to clean up a spec file before sending it to review and
>  I've got an error:
>  
>  erreur : Empty %files file /home/artelys/rpmbuild/BUILD/jamulus-
>  c6b6e3ab02d7ec1e93edeeb8042a89a561924826/debugsourcefiles.list
>  
>  The code is Qt-5 / c++. It's an application which allows to perform
>  live rehearsale via an internet connection.
>  
>  On the gcc / c++ command line, I can see the -g flags.
>  
>  The build section:
>  
>  %{set_build_flags}
>  
>  %_qt5_qmake Jamulus.pro CONFIG+=opus_shared_lib
>  
>  %make_build VERBOSE=1
>  
>  The install section (the qmake file defines no install rule so I must
>  install everything manually):
>  
>  %__install -m 755 -d %{buildroot}/%{_bindir}/
>  %__install -m 755 Jamulus %{buildroot}%{_bindir}/jamulus
>  
>  %__install -m 755 -d %{buildroot}/%{_datadir}/applications/
>  %__install -m 644 distributions/jamulus.desktop
>  %{buildroot}%{_datadir}/applications/
>  
>  %__install -m 755 -d %{buildroot}/%{_datadir}/pixmaps/
>  %__install -m 644 distributions/jamulus.png
>  %{buildroot}%{_datadir}/pixmaps/
>  
>  How can I build the debug part of the package ?
>  
>  The only solution I've found is to add:
>  
>  %global debug_package %{nil}
>  
>  At the beginning of the spec file ... 

Without a scratch build and/or a link to the spec file / srpm its hard
to help, I guess…

Cheers
Björn

_______________________________________________
devel mailing list -- devel(a)lists.fedoraproject.org
To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]

[Vascom]

Also
Macro forms of system executables SHOULD NOT be used except when there
is a need to allow the location of those executables to be
configurable. For example, rm should be used in preference to %{__rm},
but %{__python3} is acceptable.

сб, 30 мая 2020 г. в 22:51, <ycollette.nospam(a)free.fr&gt;:
>
> Yes, you're right :)
>
> Here is a link to a build with the %global debug_package %{nil} :
>
>
https://download.copr.fedorainfracloud.org/results/ycollet/linuxmao/fedor...
>
> ----- Mail original -----
> De: "Björn 'besser82' Esser" <besser82(a)fedoraproject.org&gt;
> À: "Development discussions related to Fedora"
<devel(a)lists.fedoraproject.org&gt;
> Envoyé: Samedi 30 Mai 2020 21:44:08
> Objet: Re: Packaging problem
>
> Am Samstag, den 30.05.2020, 21:20 +0200 schrieb
> ycollette.nospam(a)free.fr:
> > Hello,
> >
> > I've got a problem with a package.
> > I am trying to clean up a spec file before sending it to review and
> > I've got an error:
> >
> > erreur : Empty %files file /home/artelys/rpmbuild/BUILD/jamulus-
> > c6b6e3ab02d7ec1e93edeeb8042a89a561924826/debugsourcefiles.list
> >
> > The code is Qt-5 / c++. It's an application which allows to perform
> > live rehearsale via an internet connection.
> >
> > On the gcc / c++ command line, I can see the -g flags.
> >
> > The build section:
> >
> > %{set_build_flags}
> >
> > %_qt5_qmake Jamulus.pro CONFIG+=opus_shared_lib
> >
> > %make_build VERBOSE=1
> >
> > The install section (the qmake file defines no install rule so I must
> > install everything manually):
> >
> > %__install -m 755 -d %{buildroot}/%{_bindir}/
> > %__install -m 755 Jamulus %{buildroot}%{_bindir}/jamulus
> >
> > %__install -m 755 -d %{buildroot}/%{_datadir}/applications/
> > %__install -m 644 distributions/jamulus.desktop
> > %{buildroot}%{_datadir}/applications/
> >
> > %__install -m 755 -d %{buildroot}/%{_datadir}/pixmaps/
> > %__install -m 644 distributions/jamulus.png
> > %{buildroot}%{_datadir}/pixmaps/
> >
> > How can I build the debug part of the package ?
> >
> > The only solution I've found is to add:
> >
> > %global debug_package %{nil}
> >
> > At the beginning of the spec file ...
>
>
> Without a scratch build and/or a link to the spec file / srpm its hard
> to help, I guess…
>
> Cheers
> Björn
>
> _______________________________________________
> devel mailing list -- devel(a)lists.fedoraproject.org
> To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
https://lists.fedoraproject.org/archives/list/[e-mail]
> _______________________________________________
> devel mailing list -- devel(a)lists.fedoraproject.org
> To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
https://lists.fedoraproject.org/archives/list/[e-mail]

[Vascom]

First you should use this macro %{qmake_qt5} and remove %{set_build_flags}.

And show your spec or give srpm.

сб, 30 мая 2020 г. в 22:21, <ycollette.nospam(a)free.fr&gt;:
>
> Hello,
>
> I've got a problem with a package.
> I am trying to clean up a spec file before sending it to review and I've got an
error:
>
> erreur : Empty %files file
/home/artelys/rpmbuild/BUILD/jamulus-c6b6e3ab02d7ec1e93edeeb8042a89a561924826/debugsourcefiles.list
>
> The code is Qt-5 / c++. It's an application which allows to perform live
rehearsale via an internet connection.
>
> On the gcc / c++ command line, I can see the -g flags.
>
> The build section:
>
> %{set_build_flags}
>
> %_qt5_qmake Jamulus.pro CONFIG+=opus_shared_lib
>
> %make_build VERBOSE=1
>
> The install section (the qmake file defines no install rule so I must install
everything manually):
>
> %__install -m 755 -d %{buildroot}/%{_bindir}/
> %__install -m 755 Jamulus %{buildroot}%{_bindir}/jamulus
>
> %__install -m 755 -d %{buildroot}/%{_datadir}/applications/
> %__install -m 644 distributions/jamulus.desktop
%{buildroot}%{_datadir}/applications/
>
> %__install -m 755 -d %{buildroot}/%{_datadir}/pixmaps/
> %__install -m 644 distributions/jamulus.png %{buildroot}%{_datadir}/pixmaps/
>
> How can I build the debug part of the package ?
>
> The only solution I've found is to add:
>
> %global debug_package %{nil}
>
> At the beginning of the spec file ...
>
> Best regards,
>
> YC
> _______________________________________________
> devel mailing list -- devel(a)lists.fedoraproject.org
> To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
https://lists.fedoraproject.org/archives/list/[e-mail]

OK, thanks, it works with %{qmake_qt5} but not with %_qt5_qmake ...

Thanks a lot 

I see that qmake_qt5  macro call _qt5_qmake with some flags ...
I found the macro via rpm --showrc | grep qmake and I choose the wrong result.


----- Mail original -----
De: "Vascom" <vascom2(a)gmail.com&gt;
À: "Development discussions related to Fedora"
<devel(a)lists.fedoraproject.org&gt;
Envoyé: Samedi 30 Mai 2020 21:49:46
Objet: Re: Packaging problem

First you should use this macro %{qmake_qt5} and remove %{set_build_flags}.

And show your spec or give srpm.

сб, 30 мая 2020 г. в 22:21, <ycollette.nospam(a)free.fr&gt;:
>  Hello,
>
>  I've got a problem with a package.
>  I am trying to clean up a spec file before sending it to review and I've got an
> error:
>
>  erreur : Empty %files file
> /home/artelys/rpmbuild/BUILD/jamulus-c6b6e3ab02d7ec1e93edeeb8042a89a561924826/debugsourcefiles.list
>
>  The code is Qt-5 / c++. It's an application which allows to perform live rehearsale
> via an internet connection.
>
>  On the gcc / c++ command line, I can see the -g flags.
>
>  The build section:
>
>  %{set_build_flags}
>
>  %_qt5_qmake Jamulus.pro CONFIG+=opus_shared_lib
>
>  %make_build VERBOSE=1
>
>  The install section (the qmake file defines no install rule so I must install everything
> manually):
>
>  %__install -m 755 -d %{buildroot}/%{_bindir}/
>  %__install -m 755 Jamulus %{buildroot}%{_bindir}/jamulus
>
>  %__install -m 755 -d %{buildroot}/%{_datadir}/applications/
>  %__install -m 644 distributions/jamulus.desktop %{buildroot}%{_datadir}/applications/
>
>  %__install -m 755 -d %{buildroot}/%{_datadir}/pixmaps/
>  %__install -m 644 distributions/jamulus.png %{buildroot}%{_datadir}/pixmaps/
>
>  How can I build the debug part of the package ?
>
>  The only solution I've found is to add:
>
>  %global debug_package %{nil}
>
>  At the beginning of the spec file ...
>
>  Best regards,
>
>  YC
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
> https://lists.fedoraproject.org/archives/list/[e-mail]
_______________________________________________
devel mailing list -- devel(a)lists.fedoraproject.org
To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]

Hello again !

I've got a new problem: a gcc flags trigger a problem during generation of an object
file.
The application is based on Qt5. The problematic file is produced from a moc generated
file.
The flag in question: -fcf-protection

The solution I found is to send a custom set of flags to qmake.

What is the best approach to remove a flags from a rpm macro variable ?


# optflags   %{__global_compiler_flags} -m64 -mtune=generic -fasynchronous-unwind-tables
-fstack-clash-protection -fcf-protection
#  -fcf-protection produce an error in an object generatoin ...

qmake-qt5 Jamulus.pro \
	  QMAKE_CFLAGS_DEBUG="%{__global_compiler_flags} -m64 -mtune=generic
-fasynchronous-unwind-tables -fstack-clash-protection" \
	  QMAKE_CFLAGS_RELEASE="%{__global_compiler_flags} -m64 -mtune=generic
-fasynchronous-unwind-tables -fstack-clash-protection" \
	  QMAKE_CXXFLAGS_DEBUG="%{__global_compiler_flags} -m64 -mtune=generic
-fasynchronous-unwind-tables -fstack-clash-protection" \
	  QMAKE_CXXFLAGS_RELEASE="%{__global_compiler_flags} -m64 -mtune=generic
-fasynchronous-unwind-tables -fstack-clash-protection" \
	  CONFIG+=opus_shared_lib 

%make_build VERBOSE=1



----- Mail original -----
De: "ycollette nospam" <ycollette.nospam(a)free.fr&gt;
À: "Development discussions related to Fedora"
<devel(a)lists.fedoraproject.org&gt;
Envoyé: Samedi 30 Mai 2020 21:58:55
Objet: Re: Packaging problem

OK, thanks, it works with %{qmake_qt5} but not with %_qt5_qmake ...

Thanks a lot 

I see that qmake_qt5  macro call _qt5_qmake with some flags ...
I found the macro via rpm --showrc | grep qmake and I choose the wrong result.


----- Mail original -----
De: "Vascom" <vascom2(a)gmail.com&gt;
À: "Development discussions related to Fedora"
<devel(a)lists.fedoraproject.org&gt;
Envoyé: Samedi 30 Mai 2020 21:49:46
Objet: Re: Packaging problem

First you should use this macro %{qmake_qt5} and remove %{set_build_flags}.

And show your spec or give srpm.

сб, 30 мая 2020 г. в 22:21, <ycollette.nospam(a)free.fr&gt;:
>  Hello,
>
>  I've got a problem with a package.
>  I am trying to clean up a spec file before sending it to review and I've got an
> error:
>
>  erreur : Empty %files file
> /home/artelys/rpmbuild/BUILD/jamulus-c6b6e3ab02d7ec1e93edeeb8042a89a561924826/debugsourcefiles.list
>
>  The code is Qt-5 / c++. It's an application which allows to perform live rehearsale
> via an internet connection.
>
>  On the gcc / c++ command line, I can see the -g flags.
>
>  The build section:
>
>  %{set_build_flags}
>
>  %_qt5_qmake Jamulus.pro CONFIG+=opus_shared_lib
>
>  %make_build VERBOSE=1
>
>  The install section (the qmake file defines no install rule so I must install everything
> manually):
>
>  %__install -m 755 -d %{buildroot}/%{_bindir}/
>  %__install -m 755 Jamulus %{buildroot}%{_bindir}/jamulus
>
>  %__install -m 755 -d %{buildroot}/%{_datadir}/applications/
>  %__install -m 644 distributions/jamulus.desktop %{buildroot}%{_datadir}/applications/
>
>  %__install -m 755 -d %{buildroot}/%{_datadir}/pixmaps/
>  %__install -m 644 distributions/jamulus.png %{buildroot}%{_datadir}/pixmaps/
>
>  How can I build the debug part of the package ?
>
>  The only solution I've found is to add:
>
>  %global debug_package %{nil}
>
>  At the beginning of the spec file ...
>
>  Best regards,
>
>  YC
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
> https://lists.fedoraproject.org/archives/list/[e-mail]
_______________________________________________
devel mailing list -- devel(a)lists.fedoraproject.org
To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/[e-mail]
_______________________________________________
devel mailing list -- devel(a)lists.fedoraproject.org
To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]

[Vascom]

You should report upstream about the problem and fix code.

вс, 31 мая 2020 г., 12:49 <ycollette.nospam(a)free.fr&gt;:

>  Hello again !
>
>  I've got a new problem: a gcc flags trigger a problem during generation of
>  an object file.
>  The application is based on Qt5. The problematic file is produced from a
>  moc generated file.
>  The flag in question: -fcf-protection
>
>  The solution I found is to send a custom set of flags to qmake.
>
>  What is the best approach to remove a flags from a rpm macro variable ?
>
>
>  # optflags   %{__global_compiler_flags} -m64 -mtune=generic
>  -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection
>  #  -fcf-protection produce an error in an object generatoin ...
>
>  qmake-qt5 Jamulus.pro \
>            QMAKE_CFLAGS_DEBUG="%{__global_compiler_flags} -m64
>  -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection" \
>            QMAKE_CFLAGS_RELEASE="%{__global_compiler_flags} -m64
>  -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection" \
>            QMAKE_CXXFLAGS_DEBUG="%{__global_compiler_flags} -m64
>  -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection" \
>            QMAKE_CXXFLAGS_RELEASE="%{__global_compiler_flags} -m64
>  -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection" \
>            CONFIG+=opus_shared_lib
>
>  %make_build VERBOSE=1
>
>
>
>  ----- Mail original -----
>  De: "ycollette nospam" <ycollette.nospam(a)free.fr&gt;
>  À: "Development discussions related to Fedora" <
>  devel(a)lists.fedoraproject.org&gt;
>  Envoyé: Samedi 30 Mai 2020 21:58:55
>  Objet: Re: Packaging problem
>
>  OK, thanks, it works with %{qmake_qt5} but not with %_qt5_qmake ...
>
>  Thanks a lot
>
>  I see that qmake_qt5  macro call _qt5_qmake with some flags ...
>  I found the macro via rpm --showrc | grep qmake and I choose the wrong
>  result.
>
>
>  ----- Mail original -----
>  De: "Vascom" <vascom2(a)gmail.com&gt;
>  À: "Development discussions related to Fedora" <
>  devel(a)lists.fedoraproject.org&gt;
>  Envoyé: Samedi 30 Mai 2020 21:49:46
>  Objet: Re: Packaging problem
>
>  First you should use this macro %{qmake_qt5} and remove %{set_build_flags}.
>
>  And show your spec or give srpm.
>
>  сб, 30 мая 2020 г. в 22:21, <ycollette.nospam(a)free.fr&gt;:
>  >
>  > Hello,
>  >
>  > I've got a problem with a package.
>  > I am trying to clean up a spec file before sending it to review and I've
>  got an error:
>  >
>  > erreur : Empty %files file
>
> /home/artelys/rpmbuild/BUILD/jamulus-c6b6e3ab02d7ec1e93edeeb8042a89a561924826/debugsourcefiles.list
>  >
>  > The code is Qt-5 / c++. It's an application which allows to perform live
>  rehearsale via an internet connection.
>  >
>  > On the gcc / c++ command line, I can see the -g flags.
>  >
>  > The build section:
>  >
>  > %{set_build_flags}
>  >
>  > %_qt5_qmake Jamulus.pro CONFIG+=opus_shared_lib
>  >
>  > %make_build VERBOSE=1
>  >
>  > The install section (the qmake file defines no install rule so I must
>  install everything manually):
>  >
>  > %__install -m 755 -d %{buildroot}/%{_bindir}/
>  > %__install -m 755 Jamulus %{buildroot}%{_bindir}/jamulus
>  >
>  > %__install -m 755 -d %{buildroot}/%{_datadir}/applications/
>  > %__install -m 644 distributions/jamulus.desktop
>  %{buildroot}%{_datadir}/applications/
>  >
>  > %__install -m 755 -d %{buildroot}/%{_datadir}/pixmaps/
>  > %__install -m 644 distributions/jamulus.png
>  %{buildroot}%{_datadir}/pixmaps/
>  >
>  > How can I build the debug part of the package ?
>  >
>  > The only solution I've found is to add:
>  >
>  > %global debug_package %{nil}
>  >
>  > At the beginning of the spec file ...
>  >
>  > Best regards,
>  >
>  > YC
>  > _______________________________________________
>  > devel mailing list -- devel(a)lists.fedoraproject.org
>  > To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  > Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  > List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>

I tested with Fedora 31 and, it hangs.
I works fine with Fedora 32.

I report this problem to Jamulus or to Qt ? I think this problem is already fixed on
Fedora 32.

Does a Qt5 update is programmed for Fedora 31 ?

----- Mail original -----
De: "Vascom" <vascom2(a)gmail.com&gt;
À: "Development discussions related to Fedora"
<devel(a)lists.fedoraproject.org&gt;
Envoyé: Dimanche 31 Mai 2020 11:50:49
Objet: Re: Packaging problem



You should report upstream about the problem and fix code. 


вс, 31 мая 2020 г., 12:49 < ycollette.nospam(a)free.fr >: 


Hello again ! 

I've got a new problem: a gcc flags trigger a problem during generation of an object
file. 
The application is based on Qt5. The problematic file is produced from a moc generated
file. 
The flag in question: -fcf-protection 

The solution I found is to send a custom set of flags to qmake. 

What is the best approach to remove a flags from a rpm macro variable ? 


# optflags %{__global_compiler_flags} -m64 -mtune=generic -fasynchronous-unwind-tables
-fstack-clash-protection -fcf-protection 
# -fcf-protection produce an error in an object generatoin ... 

qmake-qt5 Jamulus.pro \ 
QMAKE_CFLAGS_DEBUG="%{__global_compiler_flags} -m64 -mtune=generic
-fasynchronous-unwind-tables -fstack-clash-protection" \ 
QMAKE_CFLAGS_RELEASE="%{__global_compiler_flags} -m64 -mtune=generic
-fasynchronous-unwind-tables -fstack-clash-protection" \ 
QMAKE_CXXFLAGS_DEBUG="%{__global_compiler_flags} -m64 -mtune=generic
-fasynchronous-unwind-tables -fstack-clash-protection" \ 
QMAKE_CXXFLAGS_RELEASE="%{__global_compiler_flags} -m64 -mtune=generic
-fasynchronous-unwind-tables -fstack-clash-protection" \ 
CONFIG+=opus_shared_lib 

%make_build VERBOSE=1 



----- Mail original ----- 
De: "ycollette nospam" < ycollette.nospam(a)free.fr > 
À: "Development discussions related to Fedora" <
devel(a)lists.fedoraproject.org > 
Envoyé: Samedi 30 Mai 2020 21:58:55 
Objet: Re: Packaging problem 

OK, thanks, it works with %{qmake_qt5} but not with %_qt5_qmake ... 

Thanks a lot 

I see that qmake_qt5 macro call _qt5_qmake with some flags ... 
I found the macro via rpm --showrc | grep qmake and I choose the wrong result. 


----- Mail original ----- 
De: "Vascom" < vascom2(a)gmail.com > 
À: "Development discussions related to Fedora" <
devel(a)lists.fedoraproject.org > 
Envoyé: Samedi 30 Mai 2020 21:49:46 
Objet: Re: Packaging problem 

First you should use this macro %{qmake_qt5} and remove %{set_build_flags}. 

And show your spec or give srpm. 

сб, 30 мая 2020 г. в 22:21, < ycollette.nospam(a)free.fr >: 
>  
>  Hello, 
>  
>  I've got a problem with a package. 
>  I am trying to clean up a spec file before sending it to review and I've got an
> error: 
>  
>  erreur : Empty %files file
> /home/artelys/rpmbuild/BUILD/jamulus-c6b6e3ab02d7ec1e93edeeb8042a89a561924826/debugsourcefiles.list
>
>  
>  The code is Qt-5 / c++. It's an application which allows to perform live rehearsale
> via an internet connection. 
>  
>  On the gcc / c++ command line, I can see the -g flags. 
>  
>  The build section: 
>  
>  %{set_build_flags} 
>  
>  %_qt5_qmake Jamulus.pro CONFIG+=opus_shared_lib 
>  
>  %make_build VERBOSE=1 
>  
>  The install section (the qmake file defines no install rule so I must install everything
> manually): 
>  
>  %__install -m 755 -d %{buildroot}/%{_bindir}/ 
>  %__install -m 755 Jamulus %{buildroot}%{_bindir}/jamulus 
>  
>  %__install -m 755 -d %{buildroot}/%{_datadir}/applications/ 
>  %__install -m 644 distributions/jamulus.desktop %{buildroot}%{_datadir}/applications/ 
>  
>  %__install -m 755 -d %{buildroot}/%{_datadir}/pixmaps/ 
>  %__install -m 644 distributions/jamulus.png %{buildroot}%{_datadir}/pixmaps/ 
>  
>  How can I build the debug part of the package ? 
>  
>  The only solution I've found is to add: 
>  
>  %global debug_package %{nil} 
>  
>  At the beginning of the spec file ... 
>  
>  Best regards, 
>  
>  YC 
>  _______________________________________________ 
>  devel mailing list -- devel(a)lists.fedoraproject.org 
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org 
>  Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ 
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines 
>  List Archives:
> https://lists.fedoraproject.org/archives/list/[e-mail] 
_______________________________________________ 
devel mailing list -- devel(a)lists.fedoraproject.org 
To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org 
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ 
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines 
List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]

_______________________________________________ 
devel mailing list -- devel(a)lists.fedoraproject.org 
To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org 
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ 
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines 
List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]

_______________________________________________ 
devel mailing list -- devel(a)lists.fedoraproject.org 
To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org 
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ 
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines 
List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]


_______________________________________________
devel mailing list -- devel(a)lists.fedoraproject.org
To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]

[Vascom]

I think Qt will not be upgraded in F31.

You can just skip build for F31 and make package for F32 and rawhide only.

вс, 31 мая 2020 г., 13:08 <ycollette.nospam(a)free.fr&gt;:

>  I tested with Fedora 31 and, it hangs.
>  I works fine with Fedora 32.
>
>  I report this problem to Jamulus or to Qt ? I think this problem is
>  already fixed on Fedora 32.
>
>  Does a Qt5 update is programmed for Fedora 31 ?
>
>  ----- Mail original -----
>  De: "Vascom" <vascom2(a)gmail.com&gt;
>  À: "Development discussions related to Fedora" <
>  devel(a)lists.fedoraproject.org&gt;
>  Envoyé: Dimanche 31 Mai 2020 11:50:49
>  Objet: Re: Packaging problem
>
>
>
>  You should report upstream about the problem and fix code.
>
>
>  вс, 31 мая 2020 г., 12:49 < ycollette.nospam(a)free.fr >:
>
>
>  Hello again !
>
>  I've got a new problem: a gcc flags trigger a problem during generation of
>  an object file.
>  The application is based on Qt5. The problematic file is produced from a
>  moc generated file.
>  The flag in question: -fcf-protection
>
>  The solution I found is to send a custom set of flags to qmake.
>
>  What is the best approach to remove a flags from a rpm macro variable ?
>
>
>  # optflags %{__global_compiler_flags} -m64 -mtune=generic
>  -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection
>  # -fcf-protection produce an error in an object generatoin ...
>
>  qmake-qt5 Jamulus.pro \
>  QMAKE_CFLAGS_DEBUG="%{__global_compiler_flags} -m64 -mtune=generic
>  -fasynchronous-unwind-tables -fstack-clash-protection" \
>  QMAKE_CFLAGS_RELEASE="%{__global_compiler_flags} -m64 -mtune=generic
>  -fasynchronous-unwind-tables -fstack-clash-protection" \
>  QMAKE_CXXFLAGS_DEBUG="%{__global_compiler_flags} -m64 -mtune=generic
>  -fasynchronous-unwind-tables -fstack-clash-protection" \
>  QMAKE_CXXFLAGS_RELEASE="%{__global_compiler_flags} -m64 -mtune=generic
>  -fasynchronous-unwind-tables -fstack-clash-protection" \
>  CONFIG+=opus_shared_lib
>
>  %make_build VERBOSE=1
>
>
>
>  ----- Mail original -----
>  De: "ycollette nospam" < ycollette.nospam(a)free.fr >
>  À: "Development discussions related to Fedora" <
>  devel(a)lists.fedoraproject.org >
>  Envoyé: Samedi 30 Mai 2020 21:58:55
>  Objet: Re: Packaging problem
>
>  OK, thanks, it works with %{qmake_qt5} but not with %_qt5_qmake ...
>
>  Thanks a lot
>
>  I see that qmake_qt5 macro call _qt5_qmake with some flags ...
>  I found the macro via rpm --showrc | grep qmake and I choose the wrong
>  result.
>
>
>  ----- Mail original -----
>  De: "Vascom" < vascom2(a)gmail.com >
>  À: "Development discussions related to Fedora" <
>  devel(a)lists.fedoraproject.org >
>  Envoyé: Samedi 30 Mai 2020 21:49:46
>  Objet: Re: Packaging problem
>
>  First you should use this macro %{qmake_qt5} and remove
>  %{set_build_flags}.
>
>  And show your spec or give srpm.
>
>  сб, 30 мая 2020 г. в 22:21, < ycollette.nospam(a)free.fr >:
>  >
>  > Hello,
>  >
>  > I've got a problem with a package.
>  > I am trying to clean up a spec file before sending it to review and I've
>  got an error:
>  >
>  > erreur : Empty %files file
>
> /home/artelys/rpmbuild/BUILD/jamulus-c6b6e3ab02d7ec1e93edeeb8042a89a561924826/debugsourcefiles.list
>
>  >
>  > The code is Qt-5 / c++. It's an application which allows to perform live
>  rehearsale via an internet connection.
>  >
>  > On the gcc / c++ command line, I can see the -g flags.
>  >
>  > The build section:
>  >
>  > %{set_build_flags}
>  >
>  > %_qt5_qmake Jamulus.pro CONFIG+=opus_shared_lib
>  >
>  > %make_build VERBOSE=1
>  >
>  > The install section (the qmake file defines no install rule so I must
>  install everything manually):
>  >
>  > %__install -m 755 -d %{buildroot}/%{_bindir}/
>  > %__install -m 755 Jamulus %{buildroot}%{_bindir}/jamulus
>  >
>  > %__install -m 755 -d %{buildroot}/%{_datadir}/applications/
>  > %__install -m 644 distributions/jamulus.desktop
>  %{buildroot}%{_datadir}/applications/
>  >
>  > %__install -m 755 -d %{buildroot}/%{_datadir}/pixmaps/
>  > %__install -m 644 distributions/jamulus.png
>  %{buildroot}%{_datadir}/pixmaps/
>  >
>  > How can I build the debug part of the package ?
>  >
>  > The only solution I've found is to add:
>  >
>  > %global debug_package %{nil}
>  >
>  > At the beginning of the spec file ...
>  >
>  > Best regards,
>  >
>  > YC
>  > _______________________________________________
>  > devel mailing list -- devel(a)lists.fedoraproject.org
>  > To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  > Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  > List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>

And is applying the workaround just for Fedora 31 tolerated ?

----- Mail original -----
De: "Vascom" <vascom2(a)gmail.com&gt;
À: "Development discussions related to Fedora"
<devel(a)lists.fedoraproject.org&gt;
Envoyé: Dimanche 31 Mai 2020 12:13:58
Objet: Re: Packaging problem



I think Qt will not be upgraded in F31. 


You can just skip build for F31 and make package for F32 and rawhide only. 


вс, 31 мая 2020 г., 13:08 < ycollette.nospam(a)free.fr >: 


I tested with Fedora 31 and, it hangs. 
I works fine with Fedora 32. 

I report this problem to Jamulus or to Qt ? I think this problem is already fixed on
Fedora 32. 

Does a Qt5 update is programmed for Fedora 31 ? 

----- Mail original ----- 
De: "Vascom" < vascom2(a)gmail.com > 
À: "Development discussions related to Fedora" <
devel(a)lists.fedoraproject.org > 
Envoyé: Dimanche 31 Mai 2020 11:50:49 
Objet: Re: Packaging problem 



You should report upstream about the problem and fix code. 


вс, 31 мая 2020 г., 12:49 < ycollette.nospam(a)free.fr >: 


Hello again ! 

I've got a new problem: a gcc flags trigger a problem during generation of an object
file. 
The application is based on Qt5. The problematic file is produced from a moc generated
file. 
The flag in question: -fcf-protection 

The solution I found is to send a custom set of flags to qmake. 

What is the best approach to remove a flags from a rpm macro variable ? 


# optflags %{__global_compiler_flags} -m64 -mtune=generic -fasynchronous-unwind-tables
-fstack-clash-protection -fcf-protection 
# -fcf-protection produce an error in an object generatoin ... 

qmake-qt5 Jamulus.pro \ 
QMAKE_CFLAGS_DEBUG="%{__global_compiler_flags} -m64 -mtune=generic
-fasynchronous-unwind-tables -fstack-clash-protection" \ 
QMAKE_CFLAGS_RELEASE="%{__global_compiler_flags} -m64 -mtune=generic
-fasynchronous-unwind-tables -fstack-clash-protection" \ 
QMAKE_CXXFLAGS_DEBUG="%{__global_compiler_flags} -m64 -mtune=generic
-fasynchronous-unwind-tables -fstack-clash-protection" \ 
QMAKE_CXXFLAGS_RELEASE="%{__global_compiler_flags} -m64 -mtune=generic
-fasynchronous-unwind-tables -fstack-clash-protection" \ 
CONFIG+=opus_shared_lib 

%make_build VERBOSE=1 



----- Mail original ----- 
De: "ycollette nospam" < ycollette.nospam(a)free.fr > 
À: "Development discussions related to Fedora" <
devel(a)lists.fedoraproject.org > 
Envoyé: Samedi 30 Mai 2020 21:58:55 
Objet: Re: Packaging problem 

OK, thanks, it works with %{qmake_qt5} but not with %_qt5_qmake ... 

Thanks a lot 

I see that qmake_qt5 macro call _qt5_qmake with some flags ... 
I found the macro via rpm --showrc | grep qmake and I choose the wrong result. 


----- Mail original ----- 
De: "Vascom" < vascom2(a)gmail.com > 
À: "Development discussions related to Fedora" <
devel(a)lists.fedoraproject.org > 
Envoyé: Samedi 30 Mai 2020 21:49:46 
Objet: Re: Packaging problem 

First you should use this macro %{qmake_qt5} and remove %{set_build_flags}. 

And show your spec or give srpm. 

сб, 30 мая 2020 г. в 22:21, < ycollette.nospam(a)free.fr >: 
>  
>  Hello, 
>  
>  I've got a problem with a package. 
>  I am trying to clean up a spec file before sending it to review and I've got an
> error: 
>  
>  erreur : Empty %files file
> /home/artelys/rpmbuild/BUILD/jamulus-c6b6e3ab02d7ec1e93edeeb8042a89a561924826/debugsourcefiles.list
>
>  
>  The code is Qt-5 / c++. It's an application which allows to perform live rehearsale
> via an internet connection. 
>  
>  On the gcc / c++ command line, I can see the -g flags. 
>  
>  The build section: 
>  
>  %{set_build_flags} 
>  
>  %_qt5_qmake Jamulus.pro CONFIG+=opus_shared_lib 
>  
>  %make_build VERBOSE=1 
>  
>  The install section (the qmake file defines no install rule so I must install everything
> manually): 
>  
>  %__install -m 755 -d %{buildroot}/%{_bindir}/ 
>  %__install -m 755 Jamulus %{buildroot}%{_bindir}/jamulus 
>  
>  %__install -m 755 -d %{buildroot}/%{_datadir}/applications/ 
>  %__install -m 644 distributions/jamulus.desktop %{buildroot}%{_datadir}/applications/ 
>  
>  %__install -m 755 -d %{buildroot}/%{_datadir}/pixmaps/ 
>  %__install -m 644 distributions/jamulus.png %{buildroot}%{_datadir}/pixmaps/ 
>  
>  How can I build the debug part of the package ? 
>  
>  The only solution I've found is to add: 
>  
>  %global debug_package %{nil} 
>  
>  At the beginning of the spec file ... 
>  
>  Best regards, 
>  
>  YC 
>  _______________________________________________ 
>  devel mailing list -- devel(a)lists.fedoraproject.org 
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org 
>  Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ 
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines 
>  List Archives:
> https://lists.fedoraproject.org/archives/list/[e-mail] 
_______________________________________________ 
devel mailing list -- devel(a)lists.fedoraproject.org 
To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org 
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ 
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines 
List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]

_______________________________________________ 
devel mailing list -- devel(a)lists.fedoraproject.org 
To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org 
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ 
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines 
List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]

_______________________________________________ 
devel mailing list -- devel(a)lists.fedoraproject.org 
To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org 
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ 
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines 
List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]


_______________________________________________ 
devel mailing list -- devel(a)lists.fedoraproject.org 
To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org 
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ 
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines 
List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]

_______________________________________________ 
devel mailing list -- devel(a)lists.fedoraproject.org 
To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org 
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ 
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines 
List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]


_______________________________________________
devel mailing list -- devel(a)lists.fedoraproject.org
To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/[e-mail]

[Vascom]

This flag added by default for security reason. So if you don't want
support previous release or have no request to support it you can skip.

Or wait answer from upstream.

вс, 31 мая 2020 г., 13:27 <ycollette.nospam(a)free.fr&gt;:

>  And is applying the workaround just for Fedora 31 tolerated ?
>
>  ----- Mail original -----
>  De: "Vascom" <vascom2(a)gmail.com&gt;
>  À: "Development discussions related to Fedora" <
>  devel(a)lists.fedoraproject.org&gt;
>  Envoyé: Dimanche 31 Mai 2020 12:13:58
>  Objet: Re: Packaging problem
>
>
>
>  I think Qt will not be upgraded in F31.
>
>
>  You can just skip build for F31 and make package for F32 and rawhide only.
>
>
>  вс, 31 мая 2020 г., 13:08 < ycollette.nospam(a)free.fr >:
>
>
>  I tested with Fedora 31 and, it hangs.
>  I works fine with Fedora 32.
>
>  I report this problem to Jamulus or to Qt ? I think this problem is
>  already fixed on Fedora 32.
>
>  Does a Qt5 update is programmed for Fedora 31 ?
>
>  ----- Mail original -----
>  De: "Vascom" < vascom2(a)gmail.com >
>  À: "Development discussions related to Fedora" <
>  devel(a)lists.fedoraproject.org >
>  Envoyé: Dimanche 31 Mai 2020 11:50:49
>  Objet: Re: Packaging problem
>
>
>
>  You should report upstream about the problem and fix code.
>
>
>  вс, 31 мая 2020 г., 12:49 < ycollette.nospam(a)free.fr >:
>
>
>  Hello again !
>
>  I've got a new problem: a gcc flags trigger a problem during generation of
>  an object file.
>  The application is based on Qt5. The problematic file is produced from a
>  moc generated file.
>  The flag in question: -fcf-protection
>
>  The solution I found is to send a custom set of flags to qmake.
>
>  What is the best approach to remove a flags from a rpm macro variable ?
>
>
>  # optflags %{__global_compiler_flags} -m64 -mtune=generic
>  -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection
>  # -fcf-protection produce an error in an object generatoin ...
>
>  qmake-qt5 Jamulus.pro \
>  QMAKE_CFLAGS_DEBUG="%{__global_compiler_flags} -m64 -mtune=generic
>  -fasynchronous-unwind-tables -fstack-clash-protection" \
>  QMAKE_CFLAGS_RELEASE="%{__global_compiler_flags} -m64 -mtune=generic
>  -fasynchronous-unwind-tables -fstack-clash-protection" \
>  QMAKE_CXXFLAGS_DEBUG="%{__global_compiler_flags} -m64 -mtune=generic
>  -fasynchronous-unwind-tables -fstack-clash-protection" \
>  QMAKE_CXXFLAGS_RELEASE="%{__global_compiler_flags} -m64 -mtune=generic
>  -fasynchronous-unwind-tables -fstack-clash-protection" \
>  CONFIG+=opus_shared_lib
>
>  %make_build VERBOSE=1
>
>
>
>  ----- Mail original -----
>  De: "ycollette nospam" < ycollette.nospam(a)free.fr >
>  À: "Development discussions related to Fedora" <
>  devel(a)lists.fedoraproject.org >
>  Envoyé: Samedi 30 Mai 2020 21:58:55
>  Objet: Re: Packaging problem
>
>  OK, thanks, it works with %{qmake_qt5} but not with %_qt5_qmake ...
>
>  Thanks a lot
>
>  I see that qmake_qt5 macro call _qt5_qmake with some flags ...
>  I found the macro via rpm --showrc | grep qmake and I choose the wrong
>  result.
>
>
>  ----- Mail original -----
>  De: "Vascom" < vascom2(a)gmail.com >
>  À: "Development discussions related to Fedora" <
>  devel(a)lists.fedoraproject.org >
>  Envoyé: Samedi 30 Mai 2020 21:49:46
>  Objet: Re: Packaging problem
>
>  First you should use this macro %{qmake_qt5} and remove
>  %{set_build_flags}.
>
>  And show your spec or give srpm.
>
>  сб, 30 мая 2020 г. в 22:21, < ycollette.nospam(a)free.fr >:
>  >
>  > Hello,
>  >
>  > I've got a problem with a package.
>  > I am trying to clean up a spec file before sending it to review and I've
>  got an error:
>  >
>  > erreur : Empty %files file
>
> /home/artelys/rpmbuild/BUILD/jamulus-c6b6e3ab02d7ec1e93edeeb8042a89a561924826/debugsourcefiles.list
>
>  >
>  > The code is Qt-5 / c++. It's an application which allows to perform live
>  rehearsale via an internet connection.
>  >
>  > On the gcc / c++ command line, I can see the -g flags.
>  >
>  > The build section:
>  >
>  > %{set_build_flags}
>  >
>  > %_qt5_qmake Jamulus.pro CONFIG+=opus_shared_lib
>  >
>  > %make_build VERBOSE=1
>  >
>  > The install section (the qmake file defines no install rule so I must
>  install everything manually):
>  >
>  > %__install -m 755 -d %{buildroot}/%{_bindir}/
>  > %__install -m 755 Jamulus %{buildroot}%{_bindir}/jamulus
>  >
>  > %__install -m 755 -d %{buildroot}/%{_datadir}/applications/
>  > %__install -m 644 distributions/jamulus.desktop
>  %{buildroot}%{_datadir}/applications/
>  >
>  > %__install -m 755 -d %{buildroot}/%{_datadir}/pixmaps/
>  > %__install -m 644 distributions/jamulus.png
>  %{buildroot}%{_datadir}/pixmaps/
>  >
>  > How can I build the debug part of the package ?
>  >
>  > The only solution I've found is to add:
>  >
>  > %global debug_package %{nil}
>  >
>  > At the beginning of the spec file ...
>  >
>  > Best regards,
>  >
>  > YC
>  > _______________________________________________
>  > devel mailing list -- devel(a)lists.fedoraproject.org
>  > To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  > Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  > List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>