Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
# Run this only if you use default Fedora modules # next time you run any DNF command default modules will be enabled again sudo dnf module reset '*'
sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync
This command does not replace `dnf system-upgrade`, but it will reveal potential problems. You may also run `dnf upgrade` before running this command.
If you get this prompt:
... Total download size: XXX M Is this ok [y/N]:
you can answer N and nothing happens, no need to test the actual upgrade.
But very likely you get some dependency problem now. In that case, please report it against the appropriate package. Or against fedora-obsolete-packages if that package should be removed in Fedora 32. Please check existing reports first: https://red.ht/2kuBDPu
Thank you
W dniu 04.03.2020 o 16:24, Miroslav Suchý pisze:
Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
# Run this only if you use default Fedora modules # next time you run any DNF command default modules will be enabled again sudo dnf module reset '*'
sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync
Problem: package moodbar-0.1.2-19.fc29.x86_64 requires libgstbase-0.10.so.0()(64bit), but none of the providers can be installed - package moodbar-0.1.2-19.fc29.x86_64 requires libgstreamer-0.10.so.0()(64bit), but none of the providers can be installed - gstreamer-0.10.36-24.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package moodbar-0.1.2-19.fc29.x86_64
Removed moodbar and next try was fine.
W dniu 04.03.2020 o 16:33, Marcin Juszkiewicz pisze:
W dniu 04.03.2020 o 16:24, Miroslav Suchý pisze:
Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
# Run this only if you use default Fedora modules # next time you run any DNF command default modules will be enabled again sudo dnf module reset '*'
sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync
Problem: package moodbar-0.1.2-19.fc29.x86_64 requires libgstbase-0.10.so.0()(64bit), but none of the providers can be installed
- package moodbar-0.1.2-19.fc29.x86_64 requires libgstreamer-0.10.so.0()(64bit), but none of the providers can be installed
- gstreamer-0.10.36-24.fc31.x86_64 does not belong to a distupgrade repository
- problem with installed package moodbar-0.1.2-19.fc29.x86_64
Removed moodbar and next try was fine.
Looked closer - there are six downgrades:
Instalowanie poprzedniej wersji: firefox x86_64 72.0.2-3.fc32 fedora 98 M java-1.8.0-openjdk-headless x86_64 1:1.8.0.242.b06-0.0.ea.fc32 fedora 32 M kf5-kirigami2 x86_64 5.67.0-1.fc32 fedora 248 k libarchive x86_64 3.4.0-2.fc32 fedora 388 k libarchive-devel x86_64 3.4.0-2.fc32 fedora 124 k qqc2-desktop-style x86_64 5.67.0-1.fc32 fedora 100 k
Problem: conflicting requests - nothing provides module(platform:f31) needed by module bat:latest:3120190813194409:22d7e2a5-0.x86_64 Error: Problem 1: package gnome-python2-desktop-2.32.0-38.fc31.x86_64 requires gnome-python2-canvas >= 2.10.0, but none of the providers can be installed - gnome-python2-canvas-2.28.1-30.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package gnome-python2-desktop-2.32.0-38.fc31.x86_64 Problem 2: package pgadmin4-python3-flask-compress-1.4.0-1.f31.noarch requires python(abi) = 3.7, but none of the providers can be installed - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package pgadmin4-python3-flask-compress-1.4.0-1.f31.noarch Problem 3: package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) = 3.7.6-2.fc31, but none of the providers can be installed - package pgadmin4-python3-flask-htmlmin-1.5.0-1.f31.noarch requires python(abi) = 3.7, but none of the providers can be installed - python3-libs-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package pgadmin4-python3-flask-htmlmin-1.5.0-1.f31.noarch Problem 4: problem with installed package timescaledb-1.5.1-1.fc31.x86_64 - package timescaledb-1.5.1-2.fc32.x86_64 requires postgresql-server(:MODULE_COMPAT_11), but none of the providers can be installed - timescaledb-1.5.1-1.fc31.x86_64 does not belong to a distupgrade repository - postgresql-server-11.7-1.fc31.x86_64 does not belong to a distupgrade repository - package postgresql-server-11.7-1.module_f32+8176+957a8c69.x86_64 is filtered out by modular filtering Problem 5: problem with installed package python3-devel-3.7.6-2.fc31.x86_64 - package python3-devel-3.8.2-2.fc32.x86_64 conflicts with python3 < 3.8.2-2.fc32 provided by python3-3.7.6-2.fc31.x86_64 - package python3-devel-3.8.2~rc2-1.fc32.x86_64 conflicts with python3 < 3.8.2~rc2-1.fc32 provided by python3-3.7.6-2.fc31.x86_64 - package pgadmin4-python3-flask-migrate-2.4.0-1.f31.noarch requires python(abi) = 3.7, but none of the providers can be installed - python3-devel-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package pgadmin4-python3-flask-migrate-2.4.0-1.f31.noarch Problem 6: problem with installed package python38-3.8.1-1.fc31.x86_64 - cannot install both python3-3.8.2-2.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - package pgadmin4-python3-psutil-5.5.1-1.f31.x86_64 requires python(abi) = 3.7, but none of the providers can be installed - python38-3.8.1-1.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package pgadmin4-python3-psutil-5.5.1-1.f31.x86_64 Problem 7: package python3-dasbus-0.2-2.fc32.noarch requires python(abi) = 3.8, but none of the providers can be installed - python3-3.8.2-2.fc32.i686 has inferior architecture - python3-3.8.2~rc2-1.fc32.i686 has inferior architecture - package anaconda-core-32.24.2-1.fc32.x86_64 requires python3-dasbus >= 0.2, but none of the providers can be installed - cannot install both python3-3.8.2-2.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - problem with installed package anaconda-core-31.22.6-2.fc31.x86_64 - package pgadmin4-python3-six-1.12.0-3.f31.noarch requires python(abi) = 3.7, but none of the providers can be installed - anaconda-core-31.22.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package pgadmin4-python3-six-1.12.0-3.f31.noarch Problem 8: package python3-dasbus-0.2-2.fc32.noarch requires python(abi) = 3.8, but none of the providers can be installed - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by python38-3.8.1-1.fc31.x86_64 - package python3-3.8.2~rc2-1.fc32.i686 requires python3-libs(x86-32) = 3.8.2~rc2-1.fc32, but none of the providers can be installed - package boost-python3-1.69.0-14.fc32.x86_64 requires libpython3.8.so.1.0()(64bit), but none of the providers can be installed - python3-libs-3.8.2~rc2-1.fc32.i686 has inferior architecture - package anaconda-core-32.24.2-1.fc32.x86_64 requires python3-dasbus >= 0.2, but none of the providers can be installed - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - package anaconda-32.24.2-1.fc32.x86_64 requires anaconda-core = 32.24.2-1.fc32, but none of the providers can be installed - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) = 3.7.6-2.fc31, but none of the providers can be installed - cannot install both python3-3.8.2-2.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - problem with installed package boost-python3-1.69.0-9.fc31.x86_64 - problem with installed package anaconda-31.22.6-2.fc31.x86_64 - package pgadmin4-python3-sshtunnel-0.1.4-1.f31.noarch requires python(abi) = 3.7, but none of the providers can be installed - boost-python3-1.69.0-9.fc31.x86_64 does not belong to a distupgrade repository - anaconda-31.22.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package pgadmin4-python3-sshtunnel-0.1.4-1.f31.noarch Problem 9: package python3-dasbus-0.2-2.fc32.noarch requires python(abi) = 3.8, but none of the providers can be installed - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by python38-3.8.1-1.fc31.x86_64 - package python3-3.8.2~rc2-1.fc32.i686 obsoletes python38 provided by python38-3.8.1-1.fc31.x86_64 - package gdb-headless-9.1-3.fc32.x86_64 requires libpython3.8.so.1.0()(64bit), but none of the providers can be installed - package anaconda-core-32.24.2-1.fc32.x86_64 requires python3-dasbus >= 0.2, but none of the providers can be installed - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - package anaconda-gui-32.24.2-1.fc32.x86_64 requires anaconda-core = 32.24.2-1.fc32, but none of the providers can be installed - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) = 3.7.6-2.fc31, but none of the providers can be installed - cannot install both python3-3.8.2-2.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - problem with installed package gdb-headless-8.3.50.20190824-30.fc31.x86_64 - problem with installed package anaconda-gui-31.22.6-2.fc31.x86_64 - package pgadmin4-python3-werkzeug-0.15.4-1.f31.noarch requires python(abi) = 3.7, but none of the providers can be installed - gdb-headless-8.3.50.20190824-30.fc31.x86_64 does not belong to a distupgrade repository - anaconda-gui-31.22.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package pgadmin4-python3-werkzeug-0.15.4-1.f31.noarch Problem 10: package python3-dasbus-0.2-2.fc32.noarch requires python(abi) = 3.8, but none of the providers can be installed - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by python38-3.8.1-1.fc31.x86_64 - package python3-3.8.2~rc2-1.fc32.i686 obsoletes python38 provided by python38-3.8.1-1.fc31.x86_64 - package gdb-headless-9.1-3.fc32.x86_64 requires libpython3.8.so.1.0()(64bit), but none of the providers can be installed - package anaconda-core-32.24.2-1.fc32.x86_64 requires python3-dasbus >= 0.2, but none of the providers can be installed - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - package anaconda-tui-32.24.2-1.fc32.x86_64 requires anaconda-core = 32.24.2-1.fc32, but none of the providers can be installed - package abrt-addon-ccpp-2.14.0-2.fc32.x86_64 requires gdb-headless, but none of the providers can be installed - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) = 3.7.6-2.fc31, but none of the providers can be installed - cannot install both python3-3.8.2-2.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - package gdb-headless-8.3.50.20190824-30.fc31.x86_64 requires libmpfr.so.4()(64bit), but none of the providers can be installed - problem with installed package anaconda-tui-31.22.6-2.fc31.x86_64 - problem with installed package abrt-addon-ccpp-2.14.0-1.fc31.x86_64 - package pgadmin4-pytz-2018.9-1.f31.noarch requires python(abi) = 3.7, but none of the providers can be installed - mpfr-3.1.6-5.fc31.x86_64 does not belong to a distupgrade repository - anaconda-tui-31.22.6-2.fc31.x86_64 does not belong to a distupgrade repository - abrt-addon-ccpp-2.14.0-1.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package pgadmin4-pytz-2018.9-1.f31.noarch Problem 11: package python3-dasbus-0.2-2.fc32.noarch requires python(abi) = 3.8, but none of the providers can be installed - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by python38-3.8.1-1.fc31.x86_64 - package python3-3.8.2~rc2-1.fc32.i686 obsoletes python38 provided by python38-3.8.1-1.fc31.x86_64 - package anaconda-core-32.24.2-1.fc32.x86_64 requires python3-dasbus >= 0.2, but none of the providers can be installed - package gdb-headless-9.1-3.fc32.x86_64 requires libpython3.8.so.1.0()(64bit), but none of the providers can be installed - package anaconda-gui-32.24.2-1.fc32.x86_64 requires anaconda-core = 32.24.2-1.fc32, but none of the providers can be installed - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - package gdb-9.1-3.fc32.x86_64 requires gdb-headless(x86-64) = 9.1-3.fc32, but none of the providers can be installed - package anaconda-live-32.24.2-1.fc32.x86_64 requires anaconda-gui = 32.24.2-1.fc32, but none of the providers can be installed - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) = 3.7.6-2.fc31, but none of the providers can be installed - cannot install both python3-3.8.2-2.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - problem with installed package gdb-8.3.50.20190824-30.fc31.x86_64 - problem with installed package anaconda-live-31.22.6-2.fc31.x86_64 - package pgadmin4-web-4.18-1.f31.noarch requires python(abi) = 3.7, but none of the providers can be installed - gdb-8.3.50.20190824-30.fc31.x86_64 does not belong to a distupgrade repository - anaconda-live-31.22.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package pgadmin4-web-4.18-1.f31.noarch Problem 12: package python3-dasbus-0.2-2.fc32.noarch requires python(abi) = 3.8, but none of the providers can be installed - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by python38-3.8.1-1.fc31.x86_64 - package python3-3.8.2~rc2-1.fc32.i686 obsoletes python38 provided by python38-3.8.1-1.fc31.x86_64 - package anaconda-core-32.24.2-1.fc32.x86_64 requires python3-dasbus >= 0.2, but none of the providers can be installed - package kitty-0.15.0-1.fc32.x86_64 requires libpython3.8.so.1.0()(64bit), but none of the providers can be installed - package anaconda-32.24.2-1.fc32.x86_64 requires anaconda-core = 32.24.2-1.fc32, but none of the providers can be installed - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - package kdump-anaconda-addon-005-8.20200220git80aab11.fc32.noarch requires anaconda >= 21.33, but none of the providers can be installed - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) = 3.7.6-2.fc31, but none of the providers can be installed - cannot install both python3-3.8.2-2.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - problem with installed package kitty-0.16.0-1.fc31.x86_64 - problem with installed package kdump-anaconda-addon-005-5.20190103gitb16ea2c.fc31.noarch - package anaconda-31.22.6-2.fc31.x86_64 requires anaconda-install-env-deps = 31.22.6-2.fc31, but none of the providers can be installed - package python3-gilt-1.2.1-1.fc31.noarch requires python(abi) = 3.7, but none of the providers can be installed - kitty-0.16.0-1.fc31.x86_64 does not belong to a distupgrade repository - kdump-anaconda-addon-005-5.20190103gitb16ea2c.fc31.noarch does not belong to a distupgrade repository - anaconda-install-env-deps-31.22.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package python3-gilt-1.2.1-1.fc31.noarch Problem 13: package python3-configobj-5.0.6-20.fc32.noarch requires python(abi) = 3.8, but none of the providers can be installed - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by python38-3.8.1-1.fc31.x86_64 - package python3-3.8.2~rc2-1.fc32.i686 obsoletes python38 provided by python38-3.8.1-1.fc31.x86_64 - package libpeas-loader-python3-1.25.3-2.fc32.x86_64 requires libpython3.8.so.1.0()(64bit), but none of the providers can be installed - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) = 3.7.6-2.fc31, but none of the providers can be installed - cannot install both python3-3.8.2-2.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - package terminator-1.91-15.fc32.noarch requires python3-configobj, but none of the providers can be installed - package pgadmin4-python3-flask-compress-1.4.0-1.f31.noarch requires python(abi) = 3.7, but none of the providers can be installed - problem with installed package terminator-1.91-10.fc31.noarch - problem with installed package libpeas-loader-python3-1.24.1-1.fc31.x86_64 - package pgadmin4-4.18-1.f31.x86_64 requires pgadmin4-python3-flask-compress >= 1.4.0, but none of the providers can be installed - terminator-1.91-10.fc31.noarch does not belong to a distupgrade repository - libpeas-loader-python3-1.24.1-1.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package pgadmin4-4.18-1.f31.x86_64 Problem 14: package python3-nftables-1:0.9.3-2.fc32.x86_64 requires python(abi) = 3.8, but none of the providers can be installed - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by python38-3.8.1-1.fc31.x86_64 - package python3-3.8.2~rc2-1.fc32.i686 obsoletes python38 provided by python38-3.8.1-1.fc31.x86_64 - package libpeas-loader-python3-1.25.3-2.fc32.x86_64 requires libpython3.8.so.1.0()(64bit), but none of the providers can be installed - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) = 3.7.6-2.fc31, but none of the providers can be installed - cannot install both python3-3.8.2-2.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - package python3-firewall-0.8.1-1.fc32.noarch requires python3-nftables, but none of the providers can be installed - package gedit-2:3.35.90-2.fc32.x86_64 requires libpeas-loader-python3(x86-64), but none of the providers can be installed - package pgadmin4-web-4.18-1.f31.noarch requires python(abi) = 3.7, but none of the providers can be installed - problem with installed package python3-firewall-0.7.3-1.fc31.noarch - package libpeas-loader-python3-1.24.1-1.fc31.x86_64 requires libpeas(x86-64) = 1.24.1-1.fc31, but none of the providers can be installed - problem with installed package gedit-2:3.34.1-1.fc31.x86_64 - package pgadmin4-desktop-common-4.18-1.f31.x86_64 requires pgadmin4-web, but none of the providers can be installed - python3-firewall-0.7.3-1.fc31.noarch does not belong to a distupgrade repository - libpeas-1.24.1-1.fc31.x86_64 does not belong to a distupgrade repository - gedit-2:3.34.1-1.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package pgadmin4-desktop-common-4.18-1.f31.x86_64 Problem 15: package python3-nftables-1:0.9.3-2.fc32.x86_64 requires python(abi) = 3.8, but none of the providers can be installed - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by python38-3.8.1-1.fc31.x86_64 - package python3-3.8.2~rc2-1.fc32.i686 obsoletes python38 provided by python38-3.8.1-1.fc31.x86_64 - package postgresql-contrib-12.2-1.fc32.x86_64 requires libpython3.8.so.1.0()(64bit), but none of the providers can be installed - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and python3-libs-3.7.6-2.fc31.x86_64 - package python3-firewall-0.8.1-1.fc32.noarch requires python3-nftables, but none of the providers can be installed - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) = 3.7.6-2.fc31, but none of the providers can be installed - cannot install both python3-3.8.2-2.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and python3-3.7.6-2.fc31.x86_64 - package firewalld-0.8.1-1.fc32.noarch requires python3-firewall = 0.8.1-1.fc32, but none of the providers can be installed - package pgadmin4-web-4.18-1.f31.noarch requires python(abi) = 3.7, but none of the providers can be installed - problem with installed package postgresql-contrib-11.7-1.fc31.x86_64 - problem with installed package firewalld-0.7.3-1.fc31.noarch - package pgadmin4-desktop-gnome-4.18-1.f31.noarch requires pgadmin4-web, but none of the providers can be installed - postgresql-contrib-11.7-1.fc31.x86_64 does not belong to a distupgrade repository - firewalld-0.7.3-1.fc31.noarch does not belong to a distupgrade repository - problem with installed package pgadmin4-desktop-gnome-4.18-1.f31.noarch
On Wed, Mar 4, 2020 at 7:15 PM Marcin Juszkiewicz mjuszkiewicz@redhat.com wrote:
W dniu 04.03.2020 o 16:33, Marcin Juszkiewicz pisze:
W dniu 04.03.2020 o 16:24, Miroslav Suchý pisze:
Do you want to make Fedora 32 better? Please spend 1 minute of your
time and try to run:
# Run this only if you use default Fedora modules # next time you run any DNF command default modules will be enabled
again
sudo dnf module reset '*'
sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync
Problem: package moodbar-0.1.2-19.fc29.x86_64 requires
libgstbase-0.10.so.0()(64bit), but none of the providers can be installed
- package moodbar-0.1.2-19.fc29.x86_64 requires
libgstreamer-0.10.so.0()(64bit), but none of the providers can be installed
- gstreamer-0.10.36-24.fc31.x86_64 does not belong to a distupgrade
repository
- problem with installed package moodbar-0.1.2-19.fc29.x86_64
Removed moodbar and next try was fine.
Looked closer - there are six downgrades:
Instalowanie poprzedniej wersji: firefox x86_64 72.0.2-3.fc32 fedora 98 M java-1.8.0-openjdk-headless x86_64 1:1.8.0.242.b06-0.0.ea.fc32 fedora 32 M kf5-kirigami2 x86_64 5.67.0-1.fc32 fedora 248 k libarchive x86_64 3.4.0-2.fc32 fedora 388 k libarchive-devel x86_64 3.4.0-2.fc32 fedora 124 k qqc2-desktop-style x86_64 5.67.0-1.fc32 fedora 100 k
devel mailing list -- devel@lists.fedoraproject.org To unsubscribe send an email to devel-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org
This is what I got:
Modular dependency problems:
Problem 1: conflicting requests - nothing provides module(platform:f31) needed by module bat:latest:3120190813194409:22d7e2a5-0.x86_64 Problem 2: conflicting requests - nothing provides module(platform:f31) needed by module libgit2:0.28:3120190812145959:f636be4b-0.x86_64 Problem 3: conflicting requests - nothing provides module(platform:f31) needed by module meson:latest:3120191009081836:dc56099c-0.x86_64 Problem 4: conflicting requests - nothing provides module(platform:f31) needed by module newsboat:latest:3120190728140405:22d7e2a5-0.x86_64 Problem 5: conflicting requests - nothing provides module(platform:f31) needed by module ninja:latest:3120190304180949:f636be4b-0.x86_64 Error: Problem 1: problem with installed package docker-compose-1.25.4-1.fc31.noarch - docker-compose-1.25.4-1.fc31.noarch does not belong to a distupgrade repository - nothing provides python3.8dist(dockerpty) >= 0.4.1 needed by docker-compose-1.24.1-3.fc32.noarch Problem 2: package docker-2:1.13.1-68.git47e2230.fc30.x86_64 requires atomic-registries >= 1.19.1-6, but none of the providers can be installed - atomic-registries-1.22.1-28.gitb507039.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package docker-2:1.13.1-68.git47e2230.fc30.x86_64 Problem 3: problem with installed package texlive-stix-9:svn47652-15.fc31.noarch - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of the providers can be installed - texlive-stix-9:svn47652-15.fc31.noarch does not belong to a distupgrade repository - stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository Problem 4: package maven-doxia-1.9-4.fc32.noarch requires mvn(org.codehaus.plexus:plexus-component-metadata), but none of the providers can be installed - problem with installed package maven-doxia-module-fo-1.7-11.fc31.noarch - package plexus-containers-component-metadata-2.1.0-2.fc32.noarch requires mvn(org.codehaus.plexus:plexus-component-annotations) = 2.1.0, but none of the providers can be installed - maven-doxia-module-fo-1.7-11.fc31.noarch does not belong to a distupgrade repository - package plexus-containers-component-annotations-2.1.0-2.fc32.noarch is filtered out by modular filtering Problem 5: package maven-doxia-1.9-4.fc32.noarch requires mvn(org.codehaus.plexus:plexus-component-metadata), but none of the providers can be installed - problem with installed package maven-doxia-module-markdown-1.7-11.fc31.noarch - package plexus-containers-component-metadata-2.1.0-2.fc32.noarch requires mvn(org.codehaus.plexus:plexus-component-annotations) = 2.1.0, but none of the providers can be installed - maven-doxia-module-markdown-1.7-11.fc31.noarch does not belong to a distupgrade repository - package plexus-containers-component-annotations-2.1.0-2.fc32.noarch is filtered out by modular filtering (try to add '--skip-broken' to skip uninstallable packages)
The stix-fonts package got rid of the stix-math-fonts package at some point. So, a texlive rebuild would probably fix the dep error unless it's an explicit Requires which will require a spec tweak? https://src.fedoraproject.org/rpms/stix-fonts/c/b60f676a2a5df7e5af9b3230bc90...
Dunno about the other maven and modular bits.
Dne 04. 03. 20 v 20:04 Ankur Sinha napsal(a):
Problem 1: conflicting requests
- nothing provides module(platform:f31) needed by module bat:latest:3120190813194409:22d7e2a5-0.x86_64
Problem 2: conflicting requests
- nothing provides module(platform:f31) needed by module libgit2:0.28:3120190812145959:f636be4b-0.x86_64
Problem 3: conflicting requests
- nothing provides module(platform:f31) needed by module meson:latest:3120191009081836:dc56099c-0.x86_64
Problem 4: conflicting requests
- nothing provides module(platform:f31) needed by module newsboat:latest:3120190728140405:22d7e2a5-0.x86_64
Problem 5: conflicting requests
- nothing provides module(platform:f31) needed by module ninja:latest:3120190304180949:f636be4b-0.x86_64
This should be solved by dnf module reset '*' did you run this command? It was mentioned in the first email.
On Wed, Mar 04, 2020 20:19:39 +0100, Miroslav Suchý wrote:
Dne 04. 03. 20 v 20:04 Ankur Sinha napsal(a):
Problem 1: conflicting requests
- nothing provides module(platform:f31) needed by module bat:latest:3120190813194409:22d7e2a5-0.x86_64
Problem 2: conflicting requests
- nothing provides module(platform:f31) needed by module libgit2:0.28:3120190812145959:f636be4b-0.x86_64
Problem 3: conflicting requests
- nothing provides module(platform:f31) needed by module meson:latest:3120191009081836:dc56099c-0.x86_64
Problem 4: conflicting requests
- nothing provides module(platform:f31) needed by module newsboat:latest:3120190728140405:22d7e2a5-0.x86_64
Problem 5: conflicting requests
- nothing provides module(platform:f31) needed by module ninja:latest:3120190304180949:f636be4b-0.x86_64
This should be solved by dnf module reset '*' did you run this command? It was mentioned in the first email.
Ah, missed that! Sorry! Now I have:
Ignoring repositories: copr:copr.fedorainfracloud.org:flatcap:neomutt Last metadata expiration check: 0:43:02 ago on Wed 04 Mar 2020 18:56:03 GMT. Error: Problem 1: problem with installed package docker-compose-1.25.4-1.fc31.noarch - docker-compose-1.25.4-1.fc31.noarch does not belong to a distupgrade repository - nothing provides python3.8dist(dockerpty) >= 0.4.1 needed by docker-compose-1.24.1-3.fc32.noarch Problem 2: package docker-2:1.13.1-68.git47e2230.fc30.x86_64 requires atomic-registries >= 1.19.1-6, but none of the providers can be installed - atomic-registries-1.22.1-28.gitb507039.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package docker-2:1.13.1-68.git47e2230.fc30.x86_64 Problem 3: problem with installed package texlive-stix-9:svn47652-15.fc31.noarch - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of the providers can be installed - texlive-stix-9:svn47652-15.fc31.noarch does not belong to a distupgrade repository - stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository (try to add '--skip-broken' to skip uninstallable packages)
On 04. 03. 20 20:41, Ankur Sinha wrote:
Error: Problem 1: problem with installed package docker-compose-1.25.4-1.fc31.noarch
- docker-compose-1.25.4-1.fc31.noarch does not belong to a distupgrade repository
- nothing provides python3.8dist(dockerpty) >= 0.4.1 needed by docker-compose-1.24.1-3.fc32.noarch
https://bugzilla.redhat.com/show_bug.cgi?id=1794272
Problem 2: package docker-2:1.13.1-68.git47e2230.fc30.x86_64 requires atomic-registries >= 1.19.1-6, but none of the providers can be installed
- atomic-registries-1.22.1-28.gitb507039.fc30.x86_64 does not belong to a distupgrade repository
- problem with installed package docker-2:1.13.1-68.git47e2230.fc30.x86_64
https://bugzilla.redhat.com/show_bug.cgi?id=1804305
Problem 3: problem with installed package texlive-stix-9:svn47652-15.fc31.noarch
- package texlive-stix-9:svn47652-18.fc32.noarch requires
stix-math-fonts, but none of the providers can be installed
- texlive-stix-9:svn47652-15.fc31.noarch does not belong to a
distupgrade repository
- stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade
repository (try to add '--skip-broken' to skip uninstallable packages)
On Wed, 2020-03-04 at 19:14 +0100, Marcin Juszkiewicz wrote:
W dniu 04.03.2020 o 16:33, Marcin Juszkiewicz pisze:
W dniu 04.03.2020 o 16:24, Miroslav Suchý pisze:
Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
# Run this only if you use default Fedora modules # next time you run any DNF command default modules will be enabled again sudo dnf module reset '*'
sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync
Problem: package moodbar-0.1.2-19.fc29.x86_64 requires libgstbase-0.10.so.0()(64bit), but none of the providers can be installed
- package moodbar-0.1.2-19.fc29.x86_64 requires libgstreamer-0.10.so.0()(64bit), but none of the providers can be installed
- gstreamer-0.10.36-24.fc31.x86_64 does not belong to a distupgrade repository
- problem with installed package moodbar-0.1.2-19.fc29.x86_64
Removed moodbar and next try was fine.
Looked closer - there are six downgrades:
Instalowanie poprzedniej wersji: firefox x86_64 72.0.2-3.fc32 fedora 98 M java-1.8.0-openjdk-headless x86_64 1:1.8.0.242.b06-0.0.ea.fc32 fedora 32 M kf5-kirigami2 x86_64 5.67.0-1.fc32 fedora 248 k libarchive x86_64 3.4.0-2.fc32 fedora 388 k libarchive-devel x86_64 3.4.0-2.fc32 fedora 124 k qqc2-desktop-style x86_64 5.67.0-1.fc32 fedora 100 k
This is fairly common during freezes; if someone submits an update to F30/F31/F32 it can go stable for F30 and F31 but not for F32 due to the freeze. So it's not unusual for things to get 'ahead' in the stable releases while the branched release is frozen.
Since upgrades use distro-sync these days it's not really something to worry about.
(Additionally, for Firefox, F32 and F33 builds have been failing for several days, but a successful F32 build just happened today. There is a proposed FE for getting it into the Beta.)
On 04. 03. 20 16:24, Miroslav Suchý wrote:
Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
# Run this only if you use default Fedora modules # next time you run any DNF command default modules will be enabled again sudo dnf module reset '*'
sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync
This command does not replace `dnf system-upgrade`, but it will reveal potential problems. You may also run `dnf upgrade` before running this command.
If you get this prompt:
... Total download size: XXX M Is this ok [y/N]:
you can answer N and nothing happens, no need to test the actual upgrade.
But very likely you get some dependency problem now. In that case, please report it against the appropriate package. Or against fedora-obsolete-packages if that package should be removed in Fedora 32. Please check existing reports first: https://red.ht/2kuBDPu
There is also:
https://bugzilla.redhat.com/show_bug.cgi?id=1804305 moby-engine does not obsolete proper version of docker, upgrading to Fedora 32 is blocked
And of course internal Red Hat tools (like rhpkg) blow up as always.
On Wed, Mar 4, 2020 at 10:25 AM Miroslav Suchý msuchy@redhat.com wrote:
Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
# Run this only if you use default Fedora modules # next time you run any DNF command default modules will be enabled again sudo dnf module reset '*'
sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync
This command does not replace `dnf system-upgrade`, but it will reveal potential problems. You may also run `dnf upgrade` before running this command.
If you get this prompt:
... Total download size: XXX M Is this ok [y/N]:
you can answer N and nothing happens, no need to test the actual upgrade.
But very likely you get some dependency problem now. In that case, please report it against the appropriate package. Or against fedora-obsolete-packages if that package should be removed in Fedora 32. Please check existing reports first: https://red.ht/2kuBDPu
Thank you
I did not get any errors (stopped before letting it do the update), but I would like to know why it does it want to downgrade two packages:
[root@localhost ~]# sudo dnf module reset '*' Last metadata expiration check: 1:35:23 ago on Wed 04 Mar 2020 09:09:41 AM EST. Dependencies resolved. Nothing to do. Complete! [root@localhost ~]# sudo dnf --releasever=32 --setopt=module_platform_id=platf orm:f32 \
--enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync
Fedora Modular 32 - x86_64 1.8 MB/s | 4.9 MB 00:02 Fedora Modular 32 - x86_64 - Updates 599 B/s | 257 B 00:00 Fedora Modular 32 - x86_64 - Test Updates 350 kB/s | 472 kB 00:01 Fedora 32 - x86_64 - Test Updates 1.8 MB/s | 4.8 MB 00:02 Fedora 32 - x86_64 - Updates 336 B/s | 257 B 00:00 Fedora 32 - x86_64 6.4 MB/s | 68 MB 00:10 Dependencies resolved. ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: kernel x86_64 5.6.0-0.rc3.git0.1.fc32 fedora 18 k kernel-core x86_64 5.6.0-0.rc3.git0.1.fc32 fedora 32 M kernel-modules x86_64 5.6.0-0.rc3.git0.1.fc32 fedora 29 M [...] Removing: kernel x86_64 5.3.7-301.fc31 @anaconda 0 kernel-core x86_64 5.3.7-301.fc31 @anaconda 67 M kernel-modules x86_64 5.3.7-301.fc31 @anaconda 28 M Downgrading: bsdtar x86_64 3.4.0-2.fc32 fedora 65 k libarchive x86_64 3.4.0-2.fc32 fedora 388 k
Transaction Summary ================================================================================ Install 16 Packages Upgrade 463 Packages Remove 3 Packages Downgrade 2 Packages
Total download size: 425 M Is this ok [y/N]: n Operation aborted. [root@localhost ~]#
-- Miroslav Suchy, RHCA Red Hat, Associate Manager ABRT/Copr, #brno, #fedora-buildsys _______________________________________________ devel mailing list -- devel@lists.fedoraproject.org To unsubscribe send an email to devel-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org
Problem with installed package mumble-1.2.19-15.fc31.x86_64 - package mumble-1.2.19-15.fc31.x86_64 requires libprotobuf.so.17()(64bit), but none of the providers can be installed - protobuf-3.6.1-5.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-3.6.1-6.module_f32+6163+c0e6dcb2.x86_64 is filtered out by modular filtering
On Wednesday, 4 March 2020 15.24.58 WET Miroslav Suchý wrote:
Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
# Run this only if you use default Fedora modules # next time you run any DNF command default modules will be enabled again sudo dnf module reset '*'
sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync
This command does not replace `dnf system-upgrade`, but it will reveal potential problems. You may also run `dnf upgrade` before running this command.
OK, I have just 15 problems. :-)
Problem: conflicting requests - nothing provides module(platform:f31) needed by module libgit2:0.27:3120190407181414:f636be4b-0.x86_64 Error: Problem 1: package python2-pytest-cov-2.8.1-5.fc31.noarch requires python2.7dist(coverage) >= 4.4, but none of the providers can be installed - python2-coverage-4.5.4-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package python2-pytest-cov-2.8.1-5.fc31.noarch Problem 2: package python3-markups-2.0.0-10.fc29.noarch requires python(abi) = 3.7, but none of the providers can be installed - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package python3-markups-2.0.0-10.fc29.noarch Problem 3: problem with installed package pdf-stapler-0.3.3-15.fc31.noarch - package pdf-stapler-1.0.0-0.3.20191215git8753251.fc32.noarch requires python3-staplelib = 1.0.0-0.3.20191215git8753251.fc32, but none of the providers can be installed - pdf-stapler-0.3.3-15.fc31.noarch does not belong to a distupgrade repository - nothing provides (python3.8dist(more-itertools) >= 2.2 with python3.8dist(more-itertools) < 6) needed by python3- staplelib-1.0.0-0.3.20191215git8753251.fc32.noarch Problem 4: package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) = 3.7.6-2.fc31, but none of the providers can be installed - package retext-7.0.3-3.fc29.noarch requires python(abi) = 3.7, but none of the providers can be installed - python3-libs-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package retext-7.0.3-3.fc29.noarch Problem 5: package ktp-common-internals-19.12.2-1.fc32.x86_64 requires libtelepathy-qt5-service.so.0()(64bit), but none of the providers can be installed - problem with installed package ktp-common-internals-19.12.1-1.fc31.x86_64 - telepathy-qt5-0.9.7-9.fc31.x86_64 does not belong to a distupgrade repository - ktp-common-internals-19.12.1-1.fc31.x86_64 does not belong to a distupgrade repository Problem 6: package texlive-collection-fontsextra-9:svn51763-18.fc32.noarch requires texlive-stix, but none of the providers can be installed - problem with installed package texlive-collection- fontsextra-9:svn51763-15.fc31.noarch - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of the providers can be installed - texlive-stix-9:svn47652-15.fc31.noarch does not belong to a distupgrade repository - texlive-collection-fontsextra-9:svn51763-15.fc31.noarch does not belong to a distupgrade repository - stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository Problem 7: package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - mp-3.1.0-23.20161124git1f39801.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 8: package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3() (64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - problem with installed package coin-or-Cbc-2.10.3-2.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - gsl-2.5-2.fc31.x86_64 does not belong to a distupgrade repository - coin-or-Cbc-2.10.3-2.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 9: problem with installed package gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires libmypaint-1.3.so.0()(64bit), but none of the providers can be installed - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade repository Problem 10: problem with installed package texlive- stix-9:svn47652-15.fc31.noarch - package texlive-stix-9:svn47652-15.fc31.noarch requires stix-math-fonts, but none of the providers can be installed - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of the providers can be installed - package stix-math-fonts-1.1.0-15.fc31.noarch requires stix-fonts = 1.1.0-15.fc31, but none of the providers can be installed - stix-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository Problem 11: package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3() (64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package asymptote-2.62-2.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package coin-or-Clp-1.17.3-3.fc31.x86_64 - problem with installed package asymptote-2.59-2.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - coin-or-Clp-1.17.3-3.fc31.x86_64 does not belong to a distupgrade repository - asymptote-2.59-2.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 12: package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libClp.so.1() (64bit), but none of the providers can be installed - package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libOsiClp.so.1()(64bit), but none of the providers can be installed - package coin-or-Clp-1.17.3-3.fc31.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package calligra-sheets-libs-3.1.0-19.fc32.x86_64 requires libgsl.so.25() (64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package coin-or-Cgl-0.60.2-2.fc31.x86_64 - problem with installed package calligra-sheets-libs-3.1.0-15.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - coin-or-Cgl-0.60.2-2.fc31.x86_64 does not belong to a distupgrade repository - calligra-sheets-libs-3.1.0-15.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 13: package opencv-core-4.2.0-3.fc32.x86_64 requires libClp.so.1() (64bit), but none of the providers can be installed - package coin-or-Clp-1.17.3-3.fc31.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package enblend-4.2-16.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package opencv-core-3.4.8-1.fc31.x86_64 - problem with installed package enblend-4.2-14.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - opencv-core-3.4.8-1.fc31.x86_64 does not belong to a distupgrade repository - enblend-4.2-14.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 14: package opencv-core-4.2.0-3.fc32.x86_64 requires libClp.so.1() (64bit), but none of the providers can be installed - package coin-or-Clp-1.17.3-3.fc31.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libopencv_core.so. 4.2()(64bit), but none of the providers can be installed - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libopencv_highgui.so. 4.2()(64bit), but none of the providers can be installed - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libopencv_imgproc.so. 4.2()(64bit), but none of the providers can be installed - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libopencv_imgcodecs.so.4.2()(64bit), but none of the providers can be installed - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libopencv_features2d.so.4.2()(64bit), but none of the providers can be installed - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libopencv_flann.so. 4.2()(64bit), but none of the providers can be installed - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libopencv_ml.so.4.2() (64bit), but none of the providers can be installed - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libopencv_objdetect.so.4.2()(64bit), but none of the providers can be installed - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libopencv_video.so. 4.2()(64bit), but none of the providers can be installed - package gsl-devel-2.6-2.fc32.x86_64 requires gsl(x86-64) = 2.6-2.fc32, but none of the providers can be installed - package gsl-devel-2.6-2.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package opencv-contrib-3.4.8-1.fc31.x86_64 - problem with installed package gsl-devel-2.5-2.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - opencv-contrib-3.4.8-1.fc31.x86_64 does not belong to a distupgrade repository - gsl-devel-2.5-2.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 15: problem with installed package python3-devel-3.7.6-2.fc31.x86_64 - package python3-devel-3.8.2-2.fc32.x86_64 conflicts with python3 < 3.8.2-2.fc32 provided by python3-3.7.6-2.fc31.x86_64 - package python3-devel-3.8.2~rc2-1.fc32.x86_64 conflicts with python3 < 3.8.2~rc2-1.fc32 provided by python3-3.7.6-2.fc31.x86_64 - problem with installed package python3-codacy- coverage-1.3.11-1.fc30.noarch - package python3-codacy-coverage-1.3.11-1.fc30.noarch requires python(abi) = 3.7, but none of the providers can be installed - python3-devel-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository (try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages)
On Wednesday, 4 March 2020 16.05.14 WET José Abílio Matos wrote:
OK, I have just 15 problems.
Now with module reset and removing (retext from F29):
Error: Problem 1: package python2-pytest-cov-2.8.1-5.fc31.noarch requires python2.7dist(coverage) >= 4.4, but none of the providers can be installed - python2-coverage-4.5.4-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package python2-pytest-cov-2.8.1-5.fc31.noarch Problem 2: problem with installed package pdf-stapler-0.3.3-15.fc31.noarch - package pdf-stapler-1.0.0-0.3.20191215git8753251.fc32.noarch requires python3-staplelib = 1.0.0-0.3.20191215git8753251.fc32, but none of the providers can be installed - pdf-stapler-0.3.3-15.fc31.noarch does not belong to a distupgrade repository - nothing provides (python3.8dist(more-itertools) >= 2.2 with python3.8dist(more-itertools) < 6) needed by python3- staplelib-1.0.0-0.3.20191215git8753251.fc32.noarch Problem 3: package ktp-common-internals-19.12.2-1.fc32.x86_64 requires libtelepathy-qt5-service.so.0()(64bit), but none of the providers can be installed - problem with installed package ktp-common-internals-19.12.1-1.fc31.x86_64 - telepathy-qt5-0.9.7-9.fc31.x86_64 does not belong to a distupgrade repository - ktp-common-internals-19.12.1-1.fc31.x86_64 does not belong to a distupgrade repository Problem 4: package texlive-collection-fontsextra-9:svn51763-18.fc32.noarch requires texlive-stix, but none of the providers can be installed - problem with installed package texlive-collection- fontsextra-9:svn51763-15.fc31.noarch - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of the providers can be installed - texlive-stix-9:svn47652-15.fc31.noarch does not belong to a distupgrade repository - texlive-collection-fontsextra-9:svn51763-15.fc31.noarch does not belong to a distupgrade repository - stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository Problem 5: problem with installed package python3-codacy- coverage-1.3.11-1.fc30.noarch - package python3-codacy-coverage-1.3.11-1.fc30.noarch requires python(abi) = 3.7, but none of the providers can be installed - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository Problem 6: problem with installed package texlive- stix-9:svn47652-15.fc31.noarch - package texlive-stix-9:svn47652-15.fc31.noarch requires stix-math-fonts, but none of the providers can be installed - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of the providers can be installed - package stix-math-fonts-1.1.0-15.fc31.noarch requires stix-fonts = 1.1.0-15.fc31, but none of the providers can be installed - stix-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository (try to add '--skip-broken' to skip uninstallable packages)
On Wed, Mar 4, 2020 at 9:07 AM José Abílio Matos jamatos@fc.up.pt wrote:
Problem 7: package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed
- problem with installed package mp-3.1.0-23.20161124git1f39801.fc31.x86_64
- package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
- package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
- mp-3.1.0-23.20161124git1f39801.fc31.x86_64 does not belong to a
distupgrade repository
- package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
Problem 8: package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3() (64bit), but none of the providers can be installed
- package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but
none of the providers can be installed
- package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
- problem with installed package coin-or-Cbc-2.10.3-2.fc31.x86_64
- package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
- package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
- gsl-2.5-2.fc31.x86_64 does not belong to a distupgrade repository
- coin-or-Cbc-2.10.3-2.fc31.x86_64 does not belong to a distupgrade
repository
- package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
This looks like yet another problem with modules. With no modules involved, this update works just fine. You can install scala, jacop, mp, and the coin-or packages in an F32 mock chroot, for example. But somehow modules are preventing scala from being installed or updated.
On Wednesday, 4 March 2020 15.24.58 WET Miroslav Suchý wrote:
Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
# Run this only if you use default Fedora modules # next time you run any DNF command default modules will be enabled again sudo dnf module reset '*'
sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync
This command does not replace `dnf system-upgrade`, but it will reveal potential problems. You may also run `dnf upgrade` before running this command.
Take 2 on another machine (now with 44, not independent, problems):
Modular dependency problems:
Problem 1: conflicting requests - nothing provides module(platform:f31) needed by module fish: 3:3120190219150858:6045e57d-0.x86_64 Problem 2: conflicting requests - nothing provides module(platform:f31) needed by module libgit2:0.28:3120190812145959:f636be4b-0.x86_64 Error: Problem 1: package R-maanova-1.50.0-4.fc31.x86_64 requires libRlapack.so() (64bit), but none of the providers can be installed - R-core-3.6.2-1.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package R-maanova-1.50.0-4.fc31.x86_64 Problem 2: package clutter-gst-1.6.0-20.fc28.x86_64 requires libgstbase-0.10.so.0()(64bit), but none of the providers can be installed - package clutter-gst-1.6.0-20.fc28.x86_64 requires libgstreamer-0.10.so.0() (64bit), but none of the providers can be installed - gstreamer-0.10.36-24.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package clutter-gst-1.6.0-20.fc28.x86_64 Problem 3: package compat-libmpc-1.1.0-4.fc31.x86_64 requires libmpfr.so.4() (64bit), but none of the providers can be installed - mpfr-3.1.6-5.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package compat-libmpc-1.1.0-4.fc31.x86_64 Problem 4: package gnome-python2-desktop-2.32.0-38.fc31.x86_64 requires gnome-python2-canvas >= 2.10.0, but none of the providers can be installed - gnome-python2-canvas-2.28.1-30.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package gnome-python2-desktop-2.32.0-38.fc31.x86_64 Problem 5: package gstreamer-rtsp-0.10.8-25.fc31.x86_64 requires libgstapp-0.10.so.0()(64bit), but none of the providers can be installed - package gstreamer-rtsp-0.10.8-25.fc31.x86_64 requires libgstrtp-0.10.so. 0()(64bit), but none of the providers can be installed - package gstreamer-rtsp-0.10.8-25.fc31.x86_64 requires libgstrtsp-0.10.so. 0()(64bit), but none of the providers can be installed - package gstreamer-rtsp-0.10.8-25.fc31.x86_64 requires libgstsdp-0.10.so. 0()(64bit), but none of the providers can be installed - gstreamer-plugins-base-0.10.36-24.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package gstreamer-rtsp-0.10.8-25.fc31.x86_64 Problem 6: package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2- backports-functools_lru_cache, but none of the providers can be installed - package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2.7dist(backports.functools-lru-cache), but none of the providers can be installed - python2-backports-functools_lru_cache-1.5-6.fc31.noarch does not belong to a distupgrade repository - problem with installed package python2-matplotlib-2.2.5-1.fc31.x86_64 Problem 7: package system-config-firewall-tui-1.2.29-21.fc29.noarch requires python2-newt, but none of the providers can be installed - python2-newt-0.52.21-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package system-config-firewall- tui-1.2.29-21.fc29.noarch Problem 8: package system-config-keyboard-1.4.0-18.fc31.noarch requires system-config-keyboard-base = 1.4.0-18.fc31, but none of the providers can be installed - system-config-keyboard-base-1.4.0-18.fc31.noarch does not belong to a distupgrade repository - problem with installed package system-config-keyboard-1.4.0-18.fc31.noarch Problem 9: package texlive-collection- plainextra-6:svn37156.0-52.20160520.fc28.noarch requires tex-texinfo, but none of the providers can be installed - texlive-texinfo-9:svn51312-15.fc31.noarch does not belong to a distupgrade repository - problem with installed package texlive-collection- plainextra-6:svn37156.0-52.20160520.fc28.noarch Problem 10: problem with installed package grpc-1.20.1-2.fc31.x86_64 - package grpc-1.26.0-2.fc32.x86_64 requires libprotobuf.so.22()(64bit), but none of the providers can be installed - grpc-1.20.1-2.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 11: package gstreamer-0.10.36-24.fc31.x86_64 requires gstreamer-tools
= 0.10.36, but none of the providers can be installed
- package moodbar-0.1.2-19.fc29.x86_64 requires libgstbase-0.10.so.0() (64bit), but none of the providers can be installed - package moodbar-0.1.2-19.fc29.x86_64 requires libgstreamer-0.10.so.0() (64bit), but none of the providers can be installed - gstreamer-tools-0.10.36-24.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package moodbar-0.1.2-19.fc29.x86_64 Problem 12: problem with installed package opencv-contrib-3.4.8-1.fc31.x86_64 - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22() (64bit), but none of the providers can be installed - opencv-contrib-3.4.8-1.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 13: problem with installed package pdf-stapler-0.3.3-15.fc31.noarch - package pdf-stapler-1.0.0-0.3.20191215git8753251.fc32.noarch requires python3-staplelib = 1.0.0-0.3.20191215git8753251.fc32, but none of the providers can be installed - pdf-stapler-0.3.3-15.fc31.noarch does not belong to a distupgrade repository - nothing provides (python3.8dist(more-itertools) >= 2.2 with python3.8dist(more-itertools) < 6) needed by python3- staplelib-1.0.0-0.3.20191215git8753251.fc32.noarch Problem 14: package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2- cycler >= 0.10.0, but none of the providers can be installed - package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2.7dist(cycler) >= 0.10, but none of the providers can be installed - package python2-matplotlib-tk-2.2.5-1.fc31.x86_64 requires python2- matplotlib(x86-64) = 2.2.5-1.fc31, but none of the providers can be installed - python2-cycler-0.10.0-10.fc31.noarch does not belong to a distupgrade repository - problem with installed package python2-matplotlib-tk-2.2.5-1.fc31.x86_64 Problem 15: package ktp-common-internals-19.12.2-1.fc32.x86_64 requires libtelepathy-qt5-service.so.0()(64bit), but none of the providers can be installed - problem with installed package ktp-common-internals-19.12.1-1.fc31.x86_64 - telepathy-qt5-0.9.7-9.fc31.x86_64 does not belong to a distupgrade repository - ktp-common-internals-19.12.1-1.fc31.x86_64 does not belong to a distupgrade repository Problem 16: package texlive-collection-fontsextra-9:svn51763-18.fc32.noarch requires texlive-stix, but none of the providers can be installed - problem with installed package texlive-collection- fontsextra-9:svn51763-15.fc31.noarch - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of the providers can be installed - texlive-stix-9:svn47652-15.fc31.noarch does not belong to a distupgrade repository - texlive-collection-fontsextra-9:svn51763-15.fc31.noarch does not belong to a distupgrade repository - stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository Problem 17: package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - mp-3.1.0-23.20161124git1f39801.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 18: package opencv-core-4.2.0-3.fc32.x86_64 requires libopencv_calib3d.so.4.2()(64bit), but none of the providers can be installed - package opencv-core-4.2.0-3.fc32.x86_64 requires libopencv_optflow.so. 4.2()(64bit), but none of the providers can be installed - problem with installed package opencv-core-3.4.8-1.fc31.x86_64 - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22() (64bit), but none of the providers can be installed - opencv-core-3.4.8-1.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 19: package opencv-4.2.0-3.fc32.x86_64 requires libopencv_aruco.so. 4.2()(64bit), but none of the providers can be installed - package opencv-4.2.0-3.fc32.x86_64 requires libopencv_calib3d.so.4.2() (64bit), but none of the providers can be installed - package opencv-4.2.0-3.fc32.x86_64 requires libopencv_xobjdetect.so.4.2() (64bit), but none of the providers can be installed - problem with installed package opencv-3.4.8-1.fc31.x86_64 - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22() (64bit), but none of the providers can be installed - opencv-3.4.8-1.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 20: package digikam-libs-7.0.0-0.3.beta2.fc32.x86_64 requires libopencv_dnn.so.4.2()(64bit), but none of the providers can be installed - problem with installed package digikam-libs-6.4.0-2.fc31.x86_64 - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22() (64bit), but none of the providers can be installed - digikam-libs-6.4.0-2.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 21: package python3-grpcio-1.26.0-2.fc32.x86_64 requires grpc(x86-64) = 1.26.0-2.fc32, but none of the providers can be installed - problem with installed package python3-grpcio-1.20.1-2.fc31.x86_64 - package grpc-1.26.0-2.fc32.x86_64 requires libprotobuf.so.22()(64bit), but none of the providers can be installed - python3-grpcio-1.20.1-2.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 22: package R-ape-5.3-4.fc32.x86_64 requires libRlapack.so()(64bit), but none of the providers can be installed - package R-core-3.6.2-1.fc31.x86_64 requires libRmath(x86-64) = 3.6.2-1.fc31, but none of the providers can be installed - problem with installed package R-ape-5.3-3.fc31.x86_64 - libRmath-3.6.2-1.fc31.x86_64 does not belong to a distupgrade repository - R-ape-5.3-3.fc31.x86_64 does not belong to a distupgrade repository Problem 23: package ceph-mgr-2:14.2.7-2.fc32.x86_64 requires python3-grpcio, but none of the providers can be installed - package python3-grpcio-1.26.0-2.fc32.x86_64 requires grpc(x86-64) = 1.26.0-2.fc32, but none of the providers can be installed - package python3-grpcio-1.20.1-2.fc31.x86_64 requires python(abi) = 3.7, but none of the providers can be installed - problem with installed package ceph-mgr-2:14.2.7-2.fc31.x86_64 - package grpc-1.26.0-2.fc32.x86_64 requires libprotobuf.so.22()(64bit), but none of the providers can be installed - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository - ceph-mgr-2:14.2.7-2.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 24: package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3() (64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - problem with installed package coin-or-Cbc-2.10.3-2.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - gsl-2.5-2.fc31.x86_64 does not belong to a distupgrade repository - coin-or-Cbc-2.10.3-2.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 25: package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires libdigikamcore.so.7.0.0()(64bit), but none of the providers can be installed - package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires libdigikamdatabase.so.7.0.0()(64bit), but none of the providers can be installed - package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires libdigikamgui.so. 7.0.0()(64bit), but none of the providers can be installed - package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires digikam-libs(x86-64) = 7.0.0-0.3.beta2.fc32, but none of the providers can be installed - package digikam-libs-7.0.0-0.3.beta2.fc32.x86_64 requires libopencv_dnn.so.4.2()(64bit), but none of the providers can be installed - problem with installed package digikam-6.4.0-2.fc31.x86_64 - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22() (64bit), but none of the providers can be installed - digikam-6.4.0-2.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 26: problem with installed package python2-newt-0.52.21-2.fc31.x86_64 - package fedora-obsolete-packages-32-37.noarch obsoletes gstreamer < 0.10.36-27 provided by gstreamer-0.10.36-24.fc31.x86_64 - package fedora-obsolete-packages-32-36.noarch obsoletes gstreamer < 0.10.36-27 provided by gstreamer-0.10.36-24.fc31.x86_64 - package python2-newt-0.52.21-2.fc31.x86_64 requires newt(x86-64) = 0.52.21-2.fc31, but none of the providers can be installed - package rstudio-1.1.453-1.x86_64 requires gstreamer, but none of the providers can be installed - newt-0.52.21-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package rstudio-1.1.453-1.x86_64 Problem 27: package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires libdigikamcore.so.7.0.0()(64bit), but none of the providers can be installed - package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires libdigikamdatabase.so.7.0.0()(64bit), but none of the providers can be installed - package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires libdigikamgui.so. 7.0.0()(64bit), but none of the providers can be installed - package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires digikam-libs(x86-64) = 7.0.0-0.3.beta2.fc32, but none of the providers can be installed - package digikam-doc-7.0.0-0.3.beta2.fc32.noarch requires digikam = 7.0.0-0.3.beta2.fc32, but none of the providers can be installed - package digikam-libs-7.0.0-0.3.beta2.fc32.x86_64 requires libopencv_dnn.so.4.2()(64bit), but none of the providers can be installed - problem with installed package digikam-doc-6.4.0-2.fc31.noarch - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22() (64bit), but none of the providers can be installed - digikam-doc-6.4.0-2.fc31.noarch does not belong to a distupgrade repository - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 28: package ceph-mgr-2:14.2.7-2.fc32.x86_64 requires python3-grpcio, but none of the providers can be installed - package ceph-2:14.2.7-2.fc32.x86_64 requires ceph-mgr = 2:14.2.7-2.fc32, but none of the providers can be installed - package python3-grpcio-1.26.0-2.fc32.x86_64 requires grpc(x86-64) = 1.26.0-2.fc32, but none of the providers can be installed - package python3-grpcio-1.20.1-2.fc31.x86_64 requires python3.7dist(six) >= 1.5.2, but none of the providers can be installed - problem with installed package ceph-2:14.2.7-2.fc31.x86_64 - package grpc-1.26.0-2.fc32.x86_64 requires libprotobuf.so.22()(64bit), but none of the providers can be installed - python3-six-1.12.0-2.fc31.noarch does not belong to a distupgrade repository - ceph-2:14.2.7-2.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 29: problem with installed package protobuf- compiler-3.6.1-6.module_f31+6165+9b01e00c.x86_64 - package python3-protobuf-3.11.2-2.fc32.noarch conflicts with protobuf- compiler < 3.11.2 provided by protobuf- compiler-3.6.1-6.module_f32+6163+c0e6dcb2.x86_64 - problem with installed package python3-protobuf-3.6.1-5.fc31.noarch - python3-protobuf-3.6.1-5.fc31.noarch does not belong to a distupgrade repository - protobuf-compiler-3.6.1-6.module_f31+6165+9b01e00c.x86_64 does not belong to a distupgrade repository Problem 30: problem with installed package texlive- stix-9:svn47652-15.fc31.noarch - package texlive-stix-9:svn47652-15.fc31.noarch requires stix-math-fonts, but none of the providers can be installed - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of the providers can be installed - package stix-math-fonts-1.1.0-15.fc31.noarch requires stix-fonts = 1.1.0-15.fc31, but none of the providers can be installed - stix-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository Problem 31: R-core-3.6.2-5.fc32.i686 has inferior architecture - package R-java-3.6.2-5.fc32.x86_64 requires R-core = 3.6.2-5.fc32, but none of the providers can be installed - cannot install both R-core-3.6.2-5.fc32.x86_64 and R- core-3.6.2-1.fc31.x86_64 - package R-igraph-1.2.4.2-1.fc32.x86_64 requires libRlapack.so()(64bit), but none of the providers can be installed - problem with installed package R-java-3.6.2-1.fc31.x86_64 - problem with installed package R-igraph-1.2.4.2-1.fc31.x86_64 - R-java-3.6.2-1.fc31.x86_64 does not belong to a distupgrade repository - R-igraph-1.2.4.2-1.fc31.x86_64 does not belong to a distupgrade repository Problem 32: package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3() (64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package R-gsl-2.1.6-4.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package sagemath-core-8.8-6.fc31.x86_64 - package sagemath-core-8.8-7.fc32.x86_64 requires libm4ri-0.0.20140914.so() (64bit), but none of the providers can be installed - problem with installed package R-gsl-2.1.6-2.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - sagemath-core-8.8-6.fc31.x86_64 does not belong to a distupgrade repository - m4ri-20140914-14.fc31.x86_64 does not belong to a distupgrade repository - R-gsl-2.1.6-2.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 33: package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3() (64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package asymptote-2.62-2.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package coin-or-Clp-1.17.3-3.fc31.x86_64 - problem with installed package asymptote-2.59-2.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - coin-or-Clp-1.17.3-3.fc31.x86_64 does not belong to a distupgrade repository - asymptote-2.59-2.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 34: package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libClp.so.1() (64bit), but none of the providers can be installed - package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libOsiClp.so.1()(64bit), but none of the providers can be installed - package coin-or-Clp-1.17.3-3.fc31.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package calligra-sheets-libs-3.1.0-19.fc32.x86_64 requires libgsl.so.25() (64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package coin-or-Cgl-0.60.2-2.fc31.x86_64 - problem with installed package calligra-sheets-libs-3.1.0-15.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - coin-or-Cgl-0.60.2-2.fc31.x86_64 does not belong to a distupgrade repository - calligra-sheets-libs-3.1.0-15.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 35: problem with installed package sagemath-8.8-6.fc31.x86_64 - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, but none of the providers can be installed - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the providers can be installed - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package cocoalib-0.99650-2.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - package sagemath-core-8.8-6.fc31.x86_64 requires libm4rie-0.0.20150908.so()(64bit), but none of the providers can be installed - package sagemath-core-8.8-7.fc32.x86_64 requires libm4rie-0.0.20150908.so()(64bit), but none of the providers can be installed - problem with installed package cocoalib-0.99650-1.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - sagemath-8.8-6.fc31.x86_64 does not belong to a distupgrade repository - m4rie-20150908-9.fc31.x86_64 does not belong to a distupgrade repository - cocoalib-0.99650-1.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 36: problem with installed package sagemath-sagetex-8.8-6.fc31.x86_64 - package sagemath-sagetex-9.0-1.fc32.x86_64 requires sagemath(x86-64) = 9.0-1.fc32, but none of the providers can be installed - package sagemath-sagetex-8.8-7.fc32.x86_64 requires sagemath(x86-64) = 8.8-7.fc32, but none of the providers can be installed - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, but none of the providers can be installed - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the providers can be installed - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package enblend-4.2-16.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - package sagemath-core-8.8-6.fc31.x86_64 requires libntl.so.42()(64bit), but none of the providers can be installed - package sagemath-core-8.8-7.fc32.x86_64 requires libntl.so.42()(64bit), but none of the providers can be installed - problem with installed package enblend-4.2-14.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - sagemath-sagetex-8.8-6.fc31.x86_64 does not belong to a distupgrade repository - ntl-11.4.1-1.fc31.x86_64 does not belong to a distupgrade repository - enblend-4.2-14.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 37: problem with installed package sagemath-rubiks-8.8-6.fc31.x86_64 - package sagemath-rubiks-9.0-1.fc32.x86_64 requires sagemath(x86-64) = 9.0-1.fc32, but none of the providers can be installed - package sagemath-rubiks-8.8-7.fc32.x86_64 requires sagemath(x86-64) = 8.8-7.fc32, but none of the providers can be installed - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, but none of the providers can be installed - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the providers can be installed - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package giac-1.5.0.85-1.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - package sagemath-core-8.8-6.fc31.x86_64 requires libsymmetrica.so.0() (64bit), but none of the providers can be installed - package sagemath-core-8.8-7.fc32.x86_64 requires libsymmetrica.so.0() (64bit), but none of the providers can be installed - problem with installed package giac-1.5.0.85-1.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - symmetrica-2.0-23.fc31.x86_64 does not belong to a distupgrade repository - sagemath-rubiks-8.8-6.fc31.x86_64 does not belong to a distupgrade repository - giac-1.5.0.85-1.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 38: problem with installed package sagemath- notebook-8.8-6.fc31.x86_64 - package sagemath-jupyter-9.0-1.fc32.x86_64 requires sagemath(x86-64) = 9.0-1.fc32, but none of the providers can be installed - package sagemath-notebook-8.8-7.fc32.x86_64 requires sagemath(x86-64) = 8.8-7.fc32, but none of the providers can be installed - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, but none of the providers can be installed - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the providers can be installed - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package gsl-devel-2.6-2.fc32.x86_64 requires gsl(x86-64) = 2.6-2.fc32, but none of the providers can be installed - package gsl-devel-2.6-2.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package sagemath-core-8.8-6.fc31.x86_64 requires libntl.so.42()(64bit), but none of the providers can be installed - package sagemath-core-8.8-7.fc32.x86_64 requires libntl.so.42()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package gsl-devel-2.5-2.fc31.x86_64 - package ntl-11.4.1-1.fc31.x86_64 requires libgf2x.so.1()(64bit), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - sagemath-notebook-8.8-6.fc31.x86_64 does not belong to a distupgrade repository - gsl-devel-2.5-2.fc31.x86_64 does not belong to a distupgrade repository - gf2x-1.2-6.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 39: problem with installed package sagemath-data-8.8-6.fc31.noarch - package sagemath-data-9.0-1.fc32.noarch requires sagemath = 9.0-1.fc32, but none of the providers can be installed - package sagemath-data-8.8-7.fc32.noarch requires sagemath = 8.8-7.fc32, but none of the providers can be installed - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, but none of the providers can be installed - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the providers can be installed - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - package sagemath-core-8.8-7.fc32.x86_64 requires libntl.so.42()(64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - cannot install both ntl-11.4.3-2.fc32.x86_64 and ntl-11.4.1-1.fc31.x86_64 - package sagemath-core-8.8-6.fc31.x86_64 requires python(abi) = 3.7, but none of the providers can be installed - package python3-cvxopt-1.2.4-3.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package Singular-4.1.1p3-12.fc32.x86_64 requires libntl.so.43()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) = 3.7.6-2.fc31, but none of the providers can be installed - problem with installed package python3-cvxopt-1.2.3-2.fc31.x86_64 - problem with installed package Singular-4.1.1p3-10.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - sagemath-data-8.8-6.fc31.noarch does not belong to a distupgrade repository - python3-libs-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository - python3-cvxopt-1.2.3-2.fc31.x86_64 does not belong to a distupgrade repository - Singular-4.1.1p3-10.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 40: problem with installed package sagemath-data- polytopes_db-8.8-6.fc31.noarch - package sagemath-data-polytopes_db-9.0-1.fc32.noarch requires sagemath- data = 9.0-1.fc32, but none of the providers can be installed - package sagemath-data-polytopes_db-8.8-7.fc32.noarch requires sagemath- data = 8.8-7.fc32, but none of the providers can be installed - package sagemath-data-9.0-1.fc32.noarch requires sagemath = 9.0-1.fc32, but none of the providers can be installed - package sagemath-data-8.8-7.fc32.noarch requires sagemath = 8.8-7.fc32, but none of the providers can be installed - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, but none of the providers can be installed - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the providers can be installed - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - package sagemath-core-8.8-7.fc32.x86_64 requires libntl.so.42()(64bit), but none of the providers can be installed - package sagemath-core-8.8-6.fc31.x86_64 requires libmpfr.so.4()(64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - cannot install both ntl-11.4.3-2.fc32.x86_64 and ntl-11.4.1-1.fc31.x86_64 - cannot install both mpfr-4.0.2-3.fc32.x86_64 and mpfr-3.1.6-5.fc31.x86_64 - package python3-pygsl-2.3.0-9.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package Singular-libs-4.1.1p3-12.fc32.x86_64 requires libntl.so.43() (64bit), but none of the providers can be installed - package R-Rmpfr-0.8.1-1.fc32.x86_64 requires libmpfr.so.6()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package python3-pygsl-2.3.0-4.fc31.x86_64 - problem with installed package Singular-libs-4.1.1p3-10.fc31.x86_64 - problem with installed package R-Rmpfr-0.8.1-1.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - sagemath-data-polytopes_db-8.8-6.fc31.noarch does not belong to a distupgrade repository - python3-pygsl-2.3.0-4.fc31.x86_64 does not belong to a distupgrade repository - Singular-libs-4.1.1p3-10.fc31.x86_64 does not belong to a distupgrade repository - R-Rmpfr-0.8.1-1.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 41: problem with installed package sagemath-data- graphs-8.8-6.fc31.noarch - package sagemath-data-graphs-9.0-1.fc32.noarch requires sagemath-data = 9.0-1.fc32, but none of the providers can be installed - package sagemath-data-graphs-8.8-7.fc32.noarch requires sagemath-data = 8.8-7.fc32, but none of the providers can be installed - package sagemath-data-9.0-1.fc32.noarch requires sagemath = 9.0-1.fc32, but none of the providers can be installed - package sagemath-data-8.8-7.fc32.noarch requires sagemath = 8.8-7.fc32, but none of the providers can be installed - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, but none of the providers can be installed - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the providers can be installed - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package sagemath-core-8.8-7.fc32.x86_64 requires libm4ri-0.0.20140914.so() (64bit), but none of the providers can be installed - package sagemath-core-8.8-6.fc31.x86_64 requires libmpfr.so.4()(64bit), but none of the providers can be installed - package calligra-sheets-libs-3.1.0-19.fc32.x86_64 requires libgsl.so.25() (64bit), but none of the providers can be installed - cannot install both m4ri-20200125-2.fc32.x86_64 and m4ri-20140914-14.fc31.x86_64 - cannot install both mpfr-4.0.2-3.fc32.x86_64 and mpfr-3.1.6-5.fc31.x86_64 - package calligra-sheets-3.1.0-19.fc32.x86_64 requires calligra-sheets- libs(x86-64) = 3.1.0-19.fc32, but none of the providers can be installed - package brial-1.2.7-2.fc32.x86_64 requires libm4ri-0.0.20200125.so() (64bit), but none of the providers can be installed - package arb-2.17.0-2.fc32.x86_64 requires libmpfr.so.6()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package calligra-sheets-3.1.0-15.fc31.x86_64 - problem with installed package brial-1.2.5-2.fc31.x86_64 - problem with installed package arb-2.16.0-3.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - sagemath-data-graphs-8.8-6.fc31.noarch does not belong to a distupgrade repository - calligra-sheets-3.1.0-15.fc31.x86_64 does not belong to a distupgrade repository - brial-1.2.5-2.fc31.x86_64 does not belong to a distupgrade repository - arb-2.16.0-3.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 42: problem with installed package sagemath-data- etc-8.8-6.fc31.noarch - package sagemath-data-etc-9.0-1.fc32.noarch requires sagemath-data = 9.0-1.fc32, but none of the providers can be installed - package sagemath-data-etc-8.8-7.fc32.noarch requires sagemath-data = 8.8-7.fc32, but none of the providers can be installed - package sagemath-data-9.0-1.fc32.noarch requires sagemath = 9.0-1.fc32, but none of the providers can be installed - package sagemath-data-8.8-7.fc32.noarch requires sagemath = 8.8-7.fc32, but none of the providers can be installed - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, but none of the providers can be installed - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the providers can be installed - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - package sagemath-core-8.8-7.fc32.x86_64 requires libm4ri-0.0.20140914.so() (64bit), but none of the providers can be installed - package sagemath-core-8.8-6.fc31.x86_64 requires libmpfr.so.4()(64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - cannot install both m4ri-20200125-2.fc32.x86_64 and m4ri-20140914-14.fc31.x86_64 - cannot install both mpfr-4.0.2-3.fc32.x86_64 and mpfr-3.1.6-5.fc31.x86_64 - package cocoalib-0.99650-2.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package cryptominisat-libs-5.6.8-6.fc32.x86_64 requires libm4ri-0.0.20200125.so()(64bit), but none of the providers can be installed - package cpp-10.0.1-0.8.fc32.x86_64 requires libmpfr.so.6()(64bit), but none of the providers can be installed - package cocoalib-devel-0.99650-2.fc32.x86_64 requires cocoalib(x86-64) = 0.99650-2.fc32, but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package cryptominisat-libs-5.6.8-2.fc31.x86_64 - problem with installed package cpp-9.2.1-1.fc31.x86_64 - problem with installed package cocoalib-devel-0.99650-1.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - sagemath-data-etc-8.8-6.fc31.noarch does not belong to a distupgrade repository - cryptominisat-libs-5.6.8-2.fc31.x86_64 does not belong to a distupgrade repository - cpp-9.2.1-1.fc31.x86_64 does not belong to a distupgrade repository - cocoalib-devel-0.99650-1.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 43: problem with installed package sagemath-data- elliptic_curves-8.8-6.fc31.noarch - package sagemath-data-elliptic_curves-9.0-1.fc32.noarch requires sagemath- data = 9.0-1.fc32, but none of the providers can be installed - package sagemath-data-elliptic_curves-8.8-7.fc32.noarch requires sagemath- data = 8.8-7.fc32, but none of the providers can be installed - package sagemath-data-9.0-1.fc32.noarch requires sagemath = 9.0-1.fc32, but none of the providers can be installed - package sagemath-data-8.8-7.fc32.noarch requires sagemath = 8.8-7.fc32, but none of the providers can be installed - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, but none of the providers can be installed - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the providers can be installed - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package giac-1.5.0.85-1.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package pynac-0.7.26-1.fc32.x86_64 requires libgiac.so.0()(64bit), but none of the providers can be installed - package giac-1.5.0.85-1.fc31.x86_64 requires libntl.so.42()(64bit), but none of the providers can be installed - package sagemath-core-8.8-6.fc31.x86_64 requires libntl.so.42()(64bit), but none of the providers can be installed - package sagemath-core-8.8-7.fc32.x86_64 requires libntl.so.42()(64bit), but none of the providers can be installed - cannot install both ntl-11.4.3-2.fc32.x86_64 and ntl-11.4.1-1.fc31.x86_64 - package eclib-20190909-3.fc32.x86_64 requires libntl.so.43()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package pynac-0.7.24-4.fc31.x86_64 - problem with installed package eclib-20190909-1.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - sagemath-data-elliptic_curves-8.8-6.fc31.noarch does not belong to a distupgrade repository - pynac-0.7.24-4.fc31.x86_64 does not belong to a distupgrade repository - eclib-20190909-1.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 44: package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3() (64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package sagemath-core-9.0-1.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - problem with installed package sagemath-data- conway_polynomials-8.8-6.fc31.noarch - package sagemath-data-conway_polynomials-9.0-1.fc32.noarch requires sagemath-data = 9.0-1.fc32, but none of the providers can be installed - package sagemath-data-conway_polynomials-8.8-7.fc32.noarch requires sagemath-data = 8.8-7.fc32, but none of the providers can be installed - package sagemath-data-9.0-1.fc32.noarch requires sagemath = 9.0-1.fc32, but none of the providers can be installed - package sagemath-data-8.8-7.fc32.noarch requires sagemath = 8.8-7.fc32, but none of the providers can be installed - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, but none of the providers can be installed - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the providers can be installed - package sagemath-core-8.8-6.fc31.x86_64 requires libntl.so.42()(64bit), but none of the providers can be installed - package sagemath-core-8.8-7.fc32.x86_64 requires libntl.so.42()(64bit), but none of the providers can be installed - cannot install both ntl-11.4.3-2.fc32.x86_64 and ntl-11.4.1-1.fc31.x86_64 - package factory-4.1.1p3-12.fc32.x86_64 requires libntl.so.43()(64bit), but none of the providers can be installed - problem with installed package factory-4.1.1p3-10.fc31.x86_64 - sagemath-data-conway_polynomials-8.8-6.fc31.noarch does not belong to a distupgrade repository - factory-4.1.1p3-10.fc31.x86_64 does not belong to a distupgrade repository - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 45: package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3() (64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23() (64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package sagemath-core-9.0-1.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - problem with installed package sagemath-data- combinatorial_designs-8.8-6.fc31.noarch - package sagemath-data-combinatorial_designs-9.0-1.fc32.noarch requires sagemath-data = 9.0-1.fc32, but none of the providers can be installed - package sagemath-data-combinatorial_designs-8.8-7.fc32.noarch requires sagemath-data = 8.8-7.fc32, but none of the providers can be installed - package sagemath-data-9.0-1.fc32.noarch requires sagemath = 9.0-1.fc32, but none of the providers can be installed - package sagemath-data-8.8-7.fc32.noarch requires sagemath = 8.8-7.fc32, but none of the providers can be installed - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, but none of the providers can be installed - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the providers can be installed - package sagemath-core-8.8-7.fc32.x86_64 requires libntl.so.42()(64bit), but none of the providers can be installed - package sagemath-core-8.8-6.fc31.x86_64 requires libmpfr.so.4()(64bit), but none of the providers can be installed - cannot install both ntl-11.4.3-2.fc32.x86_64 and ntl-11.4.1-1.fc31.x86_64 - cannot install both mpfr-4.0.2-3.fc32.x86_64 and mpfr-3.1.6-5.fc31.x86_64 - package flint-2.5.2-31.fc32.x86_64 requires libntl.so.43()(64bit), but none of the providers can be installed - package flint-2.5.2-31.fc32.x86_64 requires libmpfr.so.6()(64bit), but none of the providers can be installed - problem with installed package flint-2.5.2-28.fc31.x86_64 - sagemath-data-combinatorial_designs-8.8-6.fc31.noarch does not belong to a distupgrade repository - flint-2.5.2-28.fc31.x86_64 does not belong to a distupgrade repository - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala- library), but none of the providers can be installed - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering (try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages)
On Wed, 2020-03-04 at 16:24 +0100, Miroslav Suchý wrote:
But very likely you get some dependency problem now. In that case, please report it against the appropriate package. Or against fedora-obsolete-packages if that package should be removed in Fedora 32. Please check existing reports first: https://red.ht/2kuBDPu
[gnat@iridium ~]$ sudo dnf --releasever=32 -- setopt=module_platform_id=platform:f32 --enablerepo=updates-testing --enablerepo=updates-testing-modular distro-sync Last metadata expiration check: 0:01:26 ago on Wed 04 Mar 2020 09:13:44 AM MST. Error: Problem: package system-config-keyboard-1.4.0-18.fc31.noarch requires python2-newt, but none of the providers can be installed - python2-newt-0.52.21-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package system-config-keyboard-1.4.0- 18.fc31.noarch
If I'm reading that correctly system-config-keyboard is requiring a python2 package. Is system-config-keyboard supposed to be obsolete? Seems like probably not but I'm not sure what to do here.
On Wed, Mar 04, 2020 at 09:19:03AM -0700, Nathanael D. Noblet wrote:
On Wed, 2020-03-04 at 16:24 +0100, Miroslav Suchý wrote:
But very likely you get some dependency problem now. In that case, please report it against the appropriate package. Or against fedora-obsolete-packages if that package should be removed in Fedora 32. Please check existing reports first: https://red.ht/2kuBDPu
[gnat@iridium ~]$ sudo dnf --releasever=32 -- setopt=module_platform_id=platform:f32 --enablerepo=updates-testing --enablerepo=updates-testing-modular distro-sync Last metadata expiration check: 0:01:26 ago on Wed 04 Mar 2020 09:13:44 AM MST. Error: Problem: package system-config-keyboard-1.4.0-18.fc31.noarch requires python2-newt, but none of the providers can be installed
- python2-newt-0.52.21-2.fc31.x86_64 does not belong to a distupgrade
repository
- problem with installed package system-config-keyboard-1.4.0-
18.fc31.noarch
If I'm reading that correctly system-config-keyboard is requiring a python2 package. Is system-config-keyboard supposed to be obsolete? Seems like probably not but I'm not sure what to do here.
Yes, it's been retired [1]. Both should be added to fedora-obsolete-packages.
[1] https://src.fedoraproject.org/rpms/system-config-keyboard/c/01411c1da57bf876...
Zbyszek
On 06. 03. 20 13:58, Zbigniew Jędrzejewski-Szmek wrote:
Yes, it's been retired [1]. Both should be added to fedora-obsolete-packages
https://src.fedoraproject.org/rpms/fedora-obsolete-packages/c/a539b99a029422...
On Wed, 4 Mar 2020 16:24:58 +0100 Miroslav Suchý msuchy@redhat.com wrote:
But very likely you get some dependency problem now. In that case, please report it against the appropriate package. Or against fedora-obsolete-packages if that package should be removed in Fedora 32. Please check existing reports first: https://red.ht/2kuBDPu
I hit 124 issues. I have attached the dnf output. That's a lot of bugzillas to open; is there a better way?
On Wed, 4 Mar 2020 09:22:12 -0700 stan via devel devel@lists.fedoraproject.org wrote:
On Wed, 4 Mar 2020 16:24:58 +0100 Miroslav Suchý msuchy@redhat.com wrote:
But very likely you get some dependency problem now. In that case, please report it against the appropriate package. Or against fedora-obsolete-packages if that package should be removed in Fedora 32. Please check existing reports first: https://red.ht/2kuBDPu
I hit 124 issues. I have attached the dnf output. That's a lot of bugzillas to open; is there a better way?
When I looked at them, there were a lot of python2 problems. Since it is going away in F32, I just deleted them as problems. That leaves only 36 issues. Much more manageable. Attached.
On Wed, 2020-03-04 at 14:25 -0700, stan via devel wrote:
On Wed, 4 Mar 2020 09:22:12 -0700 stan via devel devel@lists.fedoraproject.org wrote:
On Wed, 4 Mar 2020 16:24:58 +0100 Miroslav Suchý msuchy@redhat.com wrote:
But very likely you get some dependency problem now. In that case, please report it against the appropriate package. Or against fedora-obsolete-packages if that package should be removed in Fedora 32. Please check existing reports first: https://red.ht/2kuBDPu
I hit 124 issues. I have attached the dnf output. That's a lot of bugzillas to open; is there a better way?
When I looked at them, there were a lot of python2 problems. Since it is going away in F32, I just deleted them as problems.
Those are exactly the 'problems' we're trying to detect, though. Python 2 packages don't just go away by magic, unless you pass --allow-erasing , which can potentially lead to things being removed you didn't actually want to be removed. They ought to be obsoleted properly. The reason Miroslav is asking people to run these commands is to identify packages - including Python 2 packages - which *should* be properly obsoleted but are not, among other issues.
On Wed, Mar 04, 2020 at 02:25:15PM -0700, stan via devel wrote:
Error: Problem 1: problem with installed package python3-django-post_office-3.1.0-5.fc31.noarch
- python3-django-post_office-3.1.0-5.fc31.noarch does not belong to a distupgrade repository
- nothing provides python3.8dist(jsonfield) needed by python3-django-post_office-3.1.0-6.fc32.noarch
That is strange: python3-django-jsonfield-2.0.2-9.fc32.noarch.rpm has Provides: python3dist(jsonfield) = 2.0.2, python3.8dist(jsonfield) = 2.0.2.
Zbyszek
On 06. 03. 20 14:59, Zbigniew Jędrzejewski-Szmek wrote:
On Wed, Mar 04, 2020 at 02:25:15PM -0700, stan via devel wrote:
Error: Problem 1: problem with installed package python3-django-post_office-3.1.0-5.fc31.noarch
- python3-django-post_office-3.1.0-5.fc31.noarch does not belong to a distupgrade repository
- nothing provides python3.8dist(jsonfield) needed by python3-django-post_office-3.1.0-6.fc32.noarch
That is strange: python3-django-jsonfield-2.0.2-9.fc32.noarch.rpm has Provides: python3dist(jsonfield) = 2.0.2, python3.8dist(jsonfield) = 2.0.2.
$ repoquery --repo={fedora,updates{,-testing}} --releasever 32 --latest=1 --obsoletes fedora-obsolete-packages | grep jsonfield python2-django-jsonfield < 1.0.3-6 python3-django-jsonfield < 2.0.2-9
But python3-django-post_office is not retired, it just has broken deps:
https://bugzilla.redhat.com/show_bug.cgi?id=1770825
See also https://pagure.io/releng/issue/9287
On my second machine:
Problem with installed package mkvtoolnix-gui-41.0.0-1.fc31.x86_64 - package mkvtoolnix-gui-41.0.0-2.fc32.x86_64 requires libcmark.so.0.28.3()(64bit), but none of the providers can be installed - mkvtoolnix-gui-41.0.0-1.fc31.x86_64 does not belong to a distupgrade repository - cmark-lib-0.28.3-6.fc31.x86_64 does not belong to a distupgrade repository
On Wednesday, 4 March 2020 17:23:48 CET Artur Iwicki wrote:
On my second machine:
Problem with installed package mkvtoolnix-gui-41.0.0-1.fc31.x86_64
- package mkvtoolnix-gui-41.0.0-2.fc32.x86_64 requires
libcmark.so.0.28.3()(64bit), but none of the providers can be installed
-
mkvtoolnix-gui-41.0.0-1.fc31.x86_64 does not belong to a distupgrade repository - cmark-lib-0.28.3-6.fc31.x86_64 does not belong to a distupgrade repository
Got only this one. I filled a bug https://bugzilla.redhat.com/show_bug.cgi?id=1810191
CC Rathann
On Wednesday, 04 March 2020 at 17:23, Artur Iwicki wrote:
On my second machine:
Problem with installed package mkvtoolnix-gui-41.0.0-1.fc31.x86_64
- package mkvtoolnix-gui-41.0.0-2.fc32.x86_64 requires libcmark.so.0.28.3()(64bit), but none of the providers can be installed
- mkvtoolnix-gui-41.0.0-1.fc31.x86_64 does not belong to a distupgrade repository
- cmark-lib-0.28.3-6.fc31.x86_64 does not belong to a distupgrade repository
This is due to cmark bumping SONAME. I'm on it.
Regards, Dominik
On 04/03/2020 16:24, Miroslav Suchý wrote:
Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
Error: Problem 1: package VirtualBox-6.1-6.1.2_135662_fedora31-1.x86_64 requires python(abi) = 3.7, but none of the providers can be installed - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package VirtualBox-6.1-6.1.2_135662_fedora31-1.x86_64 Problem 2: problem with installed package gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires libmypaint-1.3.so.0()(64bit), but none of the providers can be installed - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade repository
Filed gimp bug: https://bugzilla.redhat.com/show_bug.cgi?id=1810173. VirtualBox left without any actions...
Cheers! --alec
❯ LANG=C sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 --enablerepo=updates-testing --enablerepo=updates-testing-modular distro-sync Copr repo for neomutt owned by flatcap 454 B/s | 341 B 00:00 Errors during downloading metadata for repository 'flatcap-neomutt': - Status code: 404 for https://copr-be.cloud.fedoraproject.org/results/flatcap/neomutt/fedora-32-x8... (IP: 34.227.76.72) Error: Failed to download metadata for repo 'flatcap-neomutt': Cannot download repomd.xml: Cannot download repodata/repomd.xml: All mirrors were tried keybase 19 kB/s | 3.3 kB 00:00 Ignoring repositories: flatcap-neomutt Modular dependency problems:
Problem 1: conflicting requests - nothing provides module(platform:f31) needed by module bat:latest:3120190813194409:22d7e2a5-0.x86_64 Problem 2: conflicting requests - nothing provides module(platform:f31) needed by module dutree:rolling:3120190926112243:22d7e2a5-0.x86_64 Problem 3: conflicting requests - nothing provides module(platform:f31) needed by module exa:latest:3120190813195051:22d7e2a5-0.x86_64 Problem 4: conflicting requests - nothing provides module(platform:f31) needed by module ffsend:latest:3120190812145625:22d7e2a5-0.x86_64 Problem 5: conflicting requests - nothing provides module(platform:f31) needed by module fish:3:3120190219150858:6045e57d-0.x86_64 Problem 6: conflicting requests - nothing provides module(platform:f31) needed by module libgit2:0.27:3120190407181414:f636be4b-0.x86_64 Problem 7: conflicting requests - nothing provides module(platform:f31) needed by module lsd:rolling:3120190803124134:22d7e2a5-0.x86_64 Problem 8: conflicting requests - nothing provides module(platform:f31) needed by module meson:latest:3120191009081836:dc56099c-0.x86_64 Problem 9: conflicting requests - nothing provides module(platform:f31) needed by module ninja:latest:3120190304180949:f636be4b-0.x86_64 Problem 10: conflicting requests - nothing provides module(platform:f31) needed by module ripgrep:latest:3120190803131619:22d7e2a5-0.x86_64 Problem 11: conflicting requests - nothing provides module(platform:f31) needed by module skim:rolling:3120190921123929:22d7e2a5-0.x86_64 Error: Problem 1: problem with installed package rubygem-asciidoctor-pdf-1.5.0-0.12.beta.6.fc31.noarch - rubygem-asciidoctor-pdf-1.5.0-0.12.beta.6.fc31.noarch does not belong to a distupgrade repository - nothing provides (rubygem(treetop) >= 1.5.0 with rubygem(treetop) < 1.6) needed by rubygem-asciidoctor-pdf-1.5.0-0.11.beta.6.fc32.noarch Problem 2: problem with installed package docker-compose-1.25.4-1.fc31.noarch - docker-compose-1.25.4-1.fc31.noarch does not belong to a distupgrade repository - nothing provides python3.8dist(dockerpty) >= 0.4.1 needed by docker-compose-1.24.1-3.fc32.noarch Problem 3: package mysql-connector-python-8.0.19-1.fc31.x86_64 requires python2.7dist(protobuf) = 3.6.1, but none of the providers can be installed - python2-protobuf-3.6.1-5.fc31.noarch does not belong to a distupgrade repository - problem with installed package mysql-connector-python-8.0.19-1.fc31.x86_64 Problem 4: problem with installed package mkvtoolnix-gui-41.0.0-1.fc31.x86_64 - package mkvtoolnix-gui-41.0.0-2.fc32.x86_64 requires libcmark.so.0.28.3()(64bit), but none of the providers can be installed - mkvtoolnix-gui-41.0.0-1.fc31.x86_64 does not belong to a distupgrade repository - cmark-lib-0.28.3-6.fc31.x86_64 does not belong to a distupgrade repository Problem 5: package texlive-collection-fontsextra-9:svn51763-18.fc32.noarch requires texlive-stix, but none of the providers can be installed - problem with installed package texlive-collection-fontsextra-9:svn51763-15.fc31.noarch - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of the providers can be installed - texlive-stix-9:svn47652-15.fc31.noarch does not belong to a distupgrade repository - texlive-collection-fontsextra-9:svn51763-15.fc31.noarch does not belong to a distupgrade repository - stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository Problem 6: problem with installed package gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires libmypaint-1.3.so.0()(64bit), but none of the providers can be installed - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade repository Problem 7: problem with installed package texlive-stix-9:svn47652-15.fc31.noarch - package texlive-stix-9:svn47652-15.fc31.noarch requires stix-math-fonts, but none of the providers can be installed - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of the providers can be installed - package stix-math-fonts-1.1.0-15.fc31.noarch requires stix-fonts = 1.1.0-15.fc31, but none of the providers can be installed - stix-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository (try to add '--skip-broken' to skip uninstallable packages)
I just tried six different systems:
***** Two servers did the F31-F32 test upgrade cleanly. ***** A third server with F30 went kaboom quite spectactularly, mostly due to python2 stuffs:
Modular dependency problem:
Problem: conflicting requests - nothing provides module(platform:f30) needed by module fish:3:3020190301191132:602da195-0.x86_64 Error: Problem 1: package cvs2git-2.3.0-0.11.r5319svn.fc23.noarch requires cvs2commons, but none of the providers can be installed - cvs2commons-2.3.0-0.11.r5319svn.fc23.noarch does not belong to a distupgrade repository - problem with installed package cvs2git-2.3.0-0.11.r5319svn.fc23.noarch Problem 2: package geome-2.0-12.fc29.noarch requires python2-dbus, but none of the providers can be installed - python2-dbus-1.2.8-5.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package geome-2.0-12.fc29.noarch Problem 3: package mailgraph-1.14-34.fc29.noarch requires perl(:MODULE_COMPAT_5.28.0), but none of the providers can be installed - perl-libs-4:5.28.2-441.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package mailgraph-1.14-34.fc29.noarch - package perl-libs-4:5.28.2-442.module_f32+8059+8a5cccba.x86_64 is filtered out by modular filtering - package perl-libs-4:5.28.2-442.module_f32+8111+66b92dcd.x86_64 is filtered out by modular filtering Problem 4: package python2-PyDrive-1.3.1-7.fc30.noarch requires python2-oauth2client >= 4.0.0, but none of the providers can be installed - package python2-PyDrive-1.3.1-7.fc30.noarch requires python2.7dist(oauth2client) >= 4.0.0, but none of the providers can be installed - python2-oauth2client-4.1.3-2.fc30.noarch does not belong to a distupgrade repository - problem with installed package python2-PyDrive-1.3.1-7.fc30.noarch Problem 5: package python2-carddav-0.7.0-12.fc30.noarch requires python2-dateutil, but none of the providers can be installed - python2-dateutil-1:2.8.0-1.fc30.noarch does not belong to a distupgrade repository - problem with installed package python2-carddav-0.7.0-12.fc30.noarch Problem 6: package python2-cliapp-1.20180121-1.fc30.noarch requires python2-pyyaml, but none of the providers can be installed - python2-pyyaml-5.1-1.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package python2-cliapp-1.20180121-1.fc30.noarch Problem 7: package python2-cracklib-2.9.6-19.fc30.x86_64 requires cracklib = 2.9.6-19.fc30, but none of the providers can be installed - cracklib-2.9.6-19.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package python2-cracklib-2.9.6-19.fc30.x86_64 Problem 8: package python2-deltarpm-3.6-29.fc30.x86_64 requires deltarpm(x86-64) = 3.6-29.fc30, but none of the providers can be installed - deltarpm-3.6-29.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package python2-deltarpm-3.6-29.fc30.x86_64 Problem 9: package python2-dropbox-9.4.0-1.fc30.noarch requires python2-requests, but none of the providers can be installed - package python2-dropbox-9.4.0-1.fc30.noarch requires python2.7dist(requests) >= 2.16.2, but none of the providers can be installed - python2-requests-2.22.0-2.fc30.noarch does not belong to a distupgrade repository - problem with installed package python2-dropbox-9.4.0-1.fc30.noarch Problem 10: package python2-gamin-0.1.10-33.fc30.x86_64 requires gamin(x86-64) = 0.1.10-33.fc30, but none of the providers can be installed - gamin-0.1.10-33.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package python2-gamin-0.1.10-33.fc30.x86_64 Problem 11: package python2-gitdb-2.0.3-5.fc30.noarch requires python2-smmap >= 2.0.0, but none of the providers can be installed - package python2-gitdb-2.0.3-5.fc30.noarch requires python2.7dist(smmap2) >= 2.0.0, but none of the providers can be installed - python2-smmap-2.0.3-5.fc30.noarch does not belong to a distupgrade repository - problem with installed package python2-gitdb-2.0.3-5.fc30.noarch Problem 12: package python2-google-api-client-1:1.6.7-6.fc30.noarch requires python2-uritemplate >= 3.0.0, but none of the providers can be installed - package python2-google-api-client-1:1.6.7-6.fc30.noarch requires python2.7dist(uritemplate) >= 3.0.0, but none of the providers can be installed - package python2-google-api-client-1:1.6.7-6.fc30.noarch requires python2.7dist(uritemplate) < 4dev, but none of the providers can be installed - python2-uritemplate-3.0.0-5.fc30.noarch does not belong to a distupgrade repository - problem with installed package python2-google-api-client-1:1.6.7-6.fc30.noarch Problem 13: package python2-gpg-1.12.0-1.fc30.x86_64 requires gpgme(x86-64) = 1.12.0-1.fc30, but none of the providers can be installed - gpgme-1.12.0-1.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package python2-gpg-1.12.0-1.fc30.x86_64 Problem 14: package python2-larch-1.20151025-9.fc28.noarch requires python2-tracing, but none of the providers can be installed - python2-tracing-0.9-8.fc30.noarch does not belong to a distupgrade repository - problem with installed package python2-larch-1.20151025-9.fc28.noarch Problem 15: package python2-libselinux-2.9-3.1.fc30.x86_64 requires libselinux(x86-64) = 2.9-3.1.fc30, but none of the providers can be installed - libselinux-2.9-3.1.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package python2-libselinux-2.9-3.1.fc30.x86_64 Problem 16: package python2-libsemanage-2.9-1.fc30.x86_64 requires libsemanage(x86-64) = 2.9-1.fc30, but none of the providers can be installed - libsemanage-2.9-1.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package python2-libsemanage-2.9-1.fc30.x86_64 Problem 17: package python2-ndg_httpsclient-0.4.0-13.fc30.noarch requires python2-pyOpenSSL, but none of the providers can be installed - package python2-ndg_httpsclient-0.4.0-13.fc30.noarch requires python2.7dist(pyopenssl), but none of the providers can be installed - python2-pyOpenSSL-19.0.0-1.fc30.noarch does not belong to a distupgrade repository - problem with installed package python2-ndg_httpsclient-0.4.0-13.fc30.noarch Problem 18: package python2-policycoreutils-2.9-4.fc30.noarch requires policycoreutils = 2.9-4.fc30, but none of the providers can be installed - policycoreutils-2.9-4.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package python2-policycoreutils-2.9-4.fc30.noarch Problem 19: package python2-pwquality-1.4.0-12.fc30.x86_64 requires libpwquality(x86-64) = 1.4.0-12.fc30, but none of the providers can be installed - libpwquality-1.4.0-12.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package python2-pwquality-1.4.0-12.fc30.x86_64 Problem 20: package python2-setools-4.1.1-14.fc30.x86_64 requires python2-enum34, but none of the providers can be installed - python2-enum34-1.1.6-8.fc30.noarch does not belong to a distupgrade repository - problem with installed package python2-setools-4.1.1-14.fc30.x86_64 Problem 21: package python2-sphinx-1:1.8.4-1.fc30.noarch requires python-sphinx-locale = 1:1.8.4-1.fc30, but none of the providers can be installed - python-sphinx-locale-1:1.8.4-1.fc30.noarch does not belong to a distupgrade repository - problem with installed package python2-sphinx-1:1.8.4-1.fc30.noarch Problem 22: package python2-sphinxcontrib-websupport-1.0.1-12.20180316git.fc30.noarch requires python2-sqlalchemy, but none of the providers can be installed - python2-sqlalchemy-1.3.13-1.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package python2-sphinxcontrib-websupport-1.0.1-12.20180316git.fc30.noarch Problem 23: package system-config-users-1.3.8-6.fc29.noarch requires python2-libuser >= 0.56, but none of the providers can be installed - python2-libuser-0.62-20.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package system-config-users-1.3.8-6.fc29.noarch Problem 24: package python2-requests-2.22.0-2.fc30.noarch requires python2-chardet, but none of the providers can be installed - package python2-requests-2.22.0-2.fc30.noarch requires python2.7dist(chardet) >= 3.0.2, but none of the providers can be installed - package python2-requests-2.22.0-2.fc30.noarch requires python2.7dist(chardet) < 3.1.0, but none of the providers can be installed - package python2-requests-toolbelt-0.9.1-1.fc30.noarch requires python2-requests, but none of the providers can be installed - package python2-requests-toolbelt-0.9.1-1.fc30.noarch requires python2.7dist(requests) >= 2.0.1, but none of the providers can be installed - package python2-requests-toolbelt-0.9.1-1.fc30.noarch requires python2.7dist(requests) < 3.0.0, but none of the providers can be installed - python2-chardet-3.0.4-9.fc30.noarch does not belong to a distupgrade repository - problem with installed package python2-requests-toolbelt-0.9.1-1.fc30.noarch Problem 25: package python2-sphinx-1:1.8.4-1.fc30.noarch requires python2-imagesize, but none of the providers can be installed - package python2-sphinx-1:1.8.4-1.fc30.noarch requires python2.7dist(imagesize), but none of the providers can be installed - package python2-sphinx_rtd_theme-0.4.3-1.fc30.noarch requires python2.7dist(sphinx), but none of the providers can be installed - python2-imagesize-1.1.0-2.fc30.noarch does not belong to a distupgrade repository - problem with installed package python2-sphinx_rtd_theme-0.4.3-1.fc30.noarch Problem 26: package dokuwiki-selinux-20180422b-3.fc32.noarch requires python2-policycoreutils, but none of the providers can be installed - package python2-policycoreutils-2.9-4.fc30.noarch requires python2-IPy, but none of the providers can be installed - problem with installed package dokuwiki-selinux-20180422b-1.fc30.noarch - python2-IPy-0.81-24.fc30.noarch does not belong to a distupgrade repository - dokuwiki-selinux-20180422b-1.fc30.noarch does not belong to a distupgrade repository Problem 27: problem with installed package gimp-2:2.10.14-1.module_f30+6995+c35e2138.x86_64 - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires libmypaint-1.3.so.0()(64bit), but none of the providers can be installed - libmypaint-1.4.0-1.fc30.x86_64 does not belong to a distupgrade repository - gimp-2:2.10.14-1.module_f30+6995+c35e2138.x86_64 does not belong to a distupgrade repository Problem 28: package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package coin-or-Clp-1.16.10-8.fc30.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none of the providers can be installed - coin-or-Clp-1.16.10-8.fc30.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 29: problem with installed package python2-requests-2.22.0-2.fc30.noarch - package fedora-obsolete-packages-32-37.noarch obsoletes python2-smmap < 2.0.3-6 provided by python2-smmap-2.0.3-5.fc30.noarch - package fedora-obsolete-packages-32-36.noarch obsoletes python2-smmap < 2.0.3-6 provided by python2-smmap-2.0.3-5.fc30.noarch - package python2-gitdb-2.0.3-5.fc30.noarch requires python2-smmap >= 2.0.0, but none of the providers can be installed - package python2-gitdb-2.0.3-5.fc30.noarch requires python2.7dist(smmap2) >= 2.0.0, but none of the providers can be installed - package python2-requests-2.22.0-2.fc30.noarch requires python2-idna, but none of the providers can be installed - package python2-requests-2.22.0-2.fc30.noarch requires python2.7dist(idna) >= 2.5, but none of the providers can be installed - package python2-requests-2.22.0-2.fc30.noarch requires python2.7dist(idna) < 2.9, but none of the providers can be installed - package python2-GitPython-2.1.11-2.fc30.noarch requires python2-gitdb >= 2.0.0, but none of the providers can be installed - package python2-GitPython-2.1.11-2.fc30.noarch requires python2.7dist(gitdb2) >= 2.0.0, but none of the providers can be installed - python2-idna-2.7-4.fc30.noarch does not belong to a distupgrade repository - problem with installed package python2-GitPython-2.1.11-2.fc30.noarch (try to add '--skip-broken' to skip uninstallable packages)
***** Workstation 1 (which I believe was set up with F31 from the get-go)
Error: Problem: problem with installed package gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires libmypaint-1.3.so.0()(64bit), but none of the providers can be installed - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade repository (try to add '--skip-broken' to skip uninstallable packages)
***** Workstation 2 (a frankenstein laptop)
Error: Problem: problem with installed package gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires libmypaint-1.3.so.0()(64bit), but none of the providers can be installed - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade repository (try to add '--skip-broken' to skip uninstallable packages)
***** Workstation 2 (laptop first set up in 2013) (The python3-nikola package is one I built/mangled myself FWIW)
Error: Problem 1: package python3-nikola-7.8.15-0.1.fc31.noarch requires python(abi) = 3.7, but none of the providers can be installed - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package python3-nikola-7.8.15-0.1.fc31.noarch Problem 2: package python3-nikola-7.8.15-0.1.fc31.noarch requires python3.7dist(pyrss2gen) >= 1.1, but none of the providers can be installed - package python3-nikola-extras-7.8.15-0.1.fc31.noarch requires python3-nikola = 7.8.15, but none of the providers can be installed - python3-PyRSS2Gen-1.1-21.fc31.noarch does not belong to a distupgrade repository - problem with installed package python3-nikola-extras-7.8.15-0.1.fc31.noarch Problem 3: package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none of the providers can be installed - mp-3.1.0-23.20161124git1f39801.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 4: package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()(64bit), but none of the providers can be installed - problem with installed package coin-or-Cbc-2.10.3-2.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none of the providers can be installed - gsl-2.5-2.fc31.x86_64 does not belong to a distupgrade repository - coin-or-Cbc-2.10.3-2.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 5: problem with installed package gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires libmypaint-1.3.so.0()(64bit), but none of the providers can be installed - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade repository Problem 6: package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()(64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package cocoalib-0.99650-2.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package coin-or-Clp-1.17.3-3.fc31.x86_64 - problem with installed package cocoalib-0.99650-1.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none of the providers can be installed - coin-or-Clp-1.17.3-3.fc31.x86_64 does not belong to a distupgrade repository - cocoalib-0.99650-1.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 7: package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libClp.so.1()(64bit), but none of the providers can be installed - package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libOsiClp.so.1()(64bit), but none of the providers can be installed - package coin-or-Clp-1.17.3-3.fc31.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()(64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package enblend-4.2-16.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package enblend-4.2-14.fc31.x86_64 - problem with installed package coin-or-Cgl-0.60.2-2.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none of the providers can be installed - enblend-4.2-14.fc31.x86_64 does not belong to a distupgrade repository - coin-or-Cgl-0.60.2-2.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering (try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages)
***** Workstation 3 (a frankenstein beast and a lot of modular errors)
Error: Problem 1: package dispcalGUI-2.5.0.0-163.1.x86_64 requires wxPython >= 2.8.6, but none of the providers can be installed - python2-wxpython-3.0.2.0-26.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package dispcalGUI-2.5.0.0-163.1.x86_64 Problem 2: package gnome-python2-desktop-2.32.0-38.fc31.x86_64 requires gnome-python2-canvas >= 2.10.0, but none of the providers can be installed - gnome-python2-canvas-2.28.1-30.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package gnome-python2-desktop-2.32.0-38.fc31.x86_64 Problem 3: problem with installed package opencv-contrib-3.4.8-1.fc31.x86_64 - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22()(64bit), but none of the providers can be installed - opencv-contrib-3.4.8-1.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 4: package vlc-1:3.0.9-32.fc32.x86_64 requires libvlccore.so.9()(64bit), but none of the providers can be installed - problem with installed package vlc-1:3.0.9-29.fc31.x86_64 - package vlc-core-1:3.0.9-32.fc32.x86_64 requires libprotobuf-lite.so.22()(64bit), but none of the providers can be installed - vlc-core-1:3.0.9-29.fc31.x86_64 does not belong to a distupgrade repository - vlc-1:3.0.9-29.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-lite-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 5: package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none of the providers can be installed - mp-3.1.0-23.20161124git1f39801.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 6: package vlc-devel-1:3.0.9-32.fc32.x86_64 requires vlc-core(x86-64) = 1:3.0.9-32.fc32, but none of the providers can be installed - problem with installed package vlc-devel-1:3.0.9-29.fc31.x86_64 - package vlc-core-1:3.0.9-32.fc32.x86_64 requires libprotobuf-lite.so.22()(64bit), but none of the providers can be installed - vlc-devel-1:3.0.9-29.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-lite-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 7: problem with installed package vlc-core-1:3.0.9-29.fc31.x86_64 - package vlc-core-1:3.0.9-29.fc31.x86_64 requires libdvdread.so.4()(64bit), but none of the providers can be installed - package vlc-core-1:3.0.9-32.fc32.x86_64 requires libprotobuf-lite.so.22()(64bit), but none of the providers can be installed - libdvdread-6.0.2-2.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-lite-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 8: package opencv-core-4.2.0-3.fc32.x86_64 requires libopencv_calib3d.so.4.2()(64bit), but none of the providers can be installed - package opencv-core-4.2.0-3.fc32.x86_64 requires libopencv_optflow.so.4.2()(64bit), but none of the providers can be installed - problem with installed package opencv-core-3.4.8-1.fc31.x86_64 - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22()(64bit), but none of the providers can be installed - opencv-core-3.4.8-1.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 9: package opencv-4.2.0-3.fc32.x86_64 requires libopencv_calib3d.so.4.2()(64bit), but none of the providers can be installed - package opencv-4.2.0-3.fc32.x86_64 requires libopencv_aruco.so.4.2()(64bit), but none of the providers can be installed - package opencv-4.2.0-3.fc32.x86_64 requires libopencv_xobjdetect.so.4.2()(64bit), but none of the providers can be installed - problem with installed package opencv-3.4.8-1.fc31.x86_64 - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22()(64bit), but none of the providers can be installed - opencv-3.4.8-1.fc31.x86_64 does not belong to a distupgrade repository - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering Problem 10: package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()(64bit), but none of the providers can be installed - problem with installed package coin-or-Cbc-2.10.3-2.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none of the providers can be installed - gsl-2.5-2.fc31.x86_64 does not belong to a distupgrade repository - coin-or-Cbc-2.10.3-2.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 11: package gimp-data-extras-2.0.2-21.fc32.noarch requires gimp >= 2:2.0, but none of the providers can be installed - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires libmypaint-1.3.so.0()(64bit), but none of the providers can be installed - problem with installed package gimp-data-extras-2.0.2-20.fc31.noarch - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository - gimp-data-extras-2.0.2-20.fc31.noarch does not belong to a distupgrade repository - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade repository - package gimp-2:2.10.18-1.fc32.x86_64 is filtered out by modular filtering Problem 12: package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()(64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package cocoalib-0.99650-2.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package coin-or-Clp-1.17.3-3.fc31.x86_64 - problem with installed package cocoalib-0.99650-1.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none of the providers can be installed - coin-or-Clp-1.17.3-3.fc31.x86_64 does not belong to a distupgrade repository - cocoalib-0.99650-1.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering Problem 13: package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libClp.so.1()(64bit), but none of the providers can be installed - package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libOsiClp.so.1()(64bit), but none of the providers can be installed - package coin-or-Clp-1.17.3-3.fc31.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of the providers can be installed - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()(64bit), but none of the providers can be installed - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64 - package enblend-4.2-16.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the providers can be installed - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the providers can be installed - problem with installed package enblend-4.2-14.fc31.x86_64 - problem with installed package coin-or-Cgl-0.60.2-2.fc31.x86_64 - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none of the providers can be installed - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none of the providers can be installed - enblend-4.2-14.fc31.x86_64 does not belong to a distupgrade repository - coin-or-Cgl-0.60.2-2.fc31.x86_64 does not belong to a distupgrade repository - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
- Solomon
On Wed, Mar 04, 2020 at 02:00:18PM -0500, Solomon Peachy wrote:
***** A third server with F30 went kaboom quite spectactularly, mostly due to python2 stuffs:
After a dnf module reset, it went from 29 problems to 27, again mostly python2 related.
***** Workstation 1 (which I believe was set up with F31 from the get-go)
After a dnf module reset, this now upgrades cleanly.
***** Workstation 2 (laptop first set up in 2013) (The python3-nikola package is one I built/mangled myself FWIW)
After dnf module reset, it's a lot cleaner. python3-PyRSS2Gen is the only real problem here:
Error: Problem 1: package python3-nikola-7.8.15-0.1.fc31.noarch requires python(abi) = 3.7, but none of the providers can be installed - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package python3-nikola-7.8.15-0.1.fc31.noarch Problem 2: package python3-nikola-7.8.15-0.1.fc31.noarch requires python3.7dist(pyrss2gen) >= 1.1, but none of the providers can be installed - package python3-nikola-extras-7.8.15-0.1.fc31.noarch requires python3-nikola = 7.8.15, but none of the providers can be installed - python3-PyRSS2Gen-1.1-21.fc31.noarch does not belong to a distupgrade repository - problem with installed package python3-nikola-extras-7.8.15-0.1.fc31.noarch (try to add '--skip-broken' to skip uninstallable packages)
***** Workstation 3 (a frankenstein beast and a lot of modular errors)
With 'dnf module reset' this is a lot cleaner. dispcalGUI was snagged from OBS, so not a fedora problem.
Error: Problem 1: package dispcalGUI-2.5.0.0-163.1.x86_64 requires wxPython >= 2.8.6, but none of the providers can be installed - python2-wxpython-3.0.2.0-26.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package dispcalGUI-2.5.0.0-163.1.x86_64 Problem 2: package gnome-python2-desktop-2.32.0-38.fc31.x86_64 requires gnome-python2-canvas >= 2.10.0, but none of the providers can be installed - gnome-python2-canvas-2.28.1-30.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package gnome-python2-desktop-2.32.0-38.fc31.x86_64 (try to add '--skip-broken' to skip uninstallable packages)
- Solomon
Trying to do a F31->F32 beta upgrade on my primary laptop:
[...] Running transaction test The downloaded packages were saved in cache until the next successful transaction. You can remove cached packages by executing 'dnf clean packages'. Error: Transaction test error: file /usr/share/widelands/i18n/fonts/DejaVu from install of widelands-0-0.76.build20.fc32.x86_64 conflicts with file from package widelands-0-0.72.build20.fc31.x86_64 file /usr/share/fonts/dejavu/DejaVuSans-Bold.ttf conflicts between attempted installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and widelands-0-0.76.build20.fc32.x86_64 file /usr/share/fonts/dejavu/DejaVuSans-BoldOblique.ttf conflicts between attempted installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and widelands-0-0.76.build20.fc32.x86_64 file /usr/share/fonts/dejavu/DejaVuSans-ExtraLight.ttf conflicts between attempted installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and widelands-0-0.76.build20.fc32.x86_64 [...and many many more font conflicts]
...Why is the 'widelands' package bundling fonts?
- Solomon
- Solomon
On 3/18/20 5:14 PM, Solomon Peachy wrote:
Error: Transaction test error:
There appears to be a packaging change causing this problem.
file /usr/share/widelands/i18n/fonts/DejaVu from install of widelands-0-0.76.build20.fc32.x86_64 conflicts with file from package widelands-0-0.72.build20.fc31.x86_64
In the F31 version, /usr/share/widelands/i18n/fonts/DejaVu is a link to the system fonts directory. In the F32 version, somehow it has become a real directory with font files in it.
file /usr/share/fonts/dejavu/DejaVuSans-Bold.ttf conflicts between attempted installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and widelands-0-0.76.build20.fc32.x86_64 file /usr/share/fonts/dejavu/DejaVuSans-BoldOblique.ttf conflicts between attempted installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and widelands-0-0.76.build20.fc32.x86_64 file /usr/share/fonts/dejavu/DejaVuSans-ExtraLight.ttf conflicts between attempted installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and widelands-0-0.76.build20.fc32.x86_64
Since rpm can't replace the symlink, it's now trying to install the included files into the system fonts directory instead of in the widelands one.
...Why is the 'widelands' package bundling fonts?
Given that they're in an i18n directory, I assume it's trying make sure it has sufficient font coverage for different languages. Also, the widelands special font is in there as well. I don't see why they couldn't be split out though.
On Thu, Mar 19, 2020 at 5:48 AM Samuel Sieb samuel@sieb.net wrote:
On 3/18/20 5:14 PM, Solomon Peachy wrote:
Error: Transaction test error:
There appears to be a packaging change causing this problem.
file /usr/share/widelands/i18n/fonts/DejaVu from install of widelands-0-0.76.build20.fc32.x86_64 conflicts with file from package widelands-0-0.72.build20.fc31.x86_64
In the F31 version, /usr/share/widelands/i18n/fonts/DejaVu is a link to the system fonts directory. In the F32 version, somehow it has become a real directory with font files in it.
This looks like a bug in the dejavu-fonts package. Please either chime in in the bug about the incompatible packaging changes [0] or open a new one.
[0]: https://bugzilla.redhat.com/show_bug.cgi?id=1806272
Fabio
file /usr/share/fonts/dejavu/DejaVuSans-Bold.ttf conflicts between attempted installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and widelands-0-0.76.build20.fc32.x86_64 file /usr/share/fonts/dejavu/DejaVuSans-BoldOblique.ttf conflicts between attempted installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and widelands-0-0.76.build20.fc32.x86_64 file /usr/share/fonts/dejavu/DejaVuSans-ExtraLight.ttf conflicts between attempted installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and widelands-0-0.76.build20.fc32.x86_64
Since rpm can't replace the symlink, it's now trying to install the included files into the system fonts directory instead of in the widelands one.
...Why is the 'widelands' package bundling fonts?
Given that they're in an i18n directory, I assume it's trying make sure it has sufficient font coverage for different languages. Also, the widelands special font is in there as well. I don't see why they couldn't be split out though. _______________________________________________ devel mailing list -- devel@lists.fedoraproject.org To unsubscribe send an email to devel-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org
On Wed, Mar 04, 2020 at 02:33:02PM -0500, Solomon Peachy wrote:
***** Workstation 3 (a frankenstein beast and a lot of modular errors)
With 'dnf module reset' this is a lot cleaner. dispcalGUI was snagged from OBS, so not a fedora problem.
Tried to upgrade this workstation from F31 to F32 beta. The old errors did not show up, but now I'm getting these new ones:
Error: Problem 1: package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2-backports-functools_lru_cache, but none of the providers can be installed - package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2.7dist(backports.functools-lru-cache), but none of the providers can be installed - python2-backports-functools_lru_cache-1.5-6.fc31.noarch does not belong to a distupgrade repository - problem with installed package python2-matplotlib-2.2.5-1.fc31.x86_64 Problem 2: package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2-cycler >= 0.10.0, but none of the providers can be installed - package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2.7dist(cycler) >= 0.10, but none of the providers can be installed - package python2-matplotlib-tk-2.2.5-1.fc31.x86_64 requires python2-matplotlib(x86-64) = 2.2.5-1.fc31, but none of the providers can be installed - python2-cycler-0.10.0-10.fc31.noarch does not belong to a distupgrade repository - problem with installed package python2-matplotlib-tk-2.2.5-1.fc31.x86_64
I nuked python2-matplotlib and python2-matplotlib-tk, and it was able to proceed. One thing that looked odd is that it's downgrading a bunch of packages, including the kernel:
kernel-tools x86_64 5.5.0-0.rc6.git0.1.fc32 fedora 190 k kernel-tools-libs x86_64 5.5.0-0.rc6.git0.1.fc32 fedora 21 k kernel-tools-libs-devel x86_64 5.5.0-0.rc6.git0.1.fc32 fedora 14 k
I wonder if I'm hitting an out-of-date mirror? The other system I just updated had a 5.6.0-0.rc kernel out of the gate..
- Solomon
On 3/19/20 6:59 PM, Solomon Peachy wrote:
I nuked python2-matplotlib and python2-matplotlib-tk, and it was able to proceed. One thing that looked odd is that it's downgrading a bunch of packages, including the kernel:
kernel-tools x86_64 5.5.0-0.rc6.git0.1.fc32 fedora 190 k kernel-tools-libs x86_64 5.5.0-0.rc6.git0.1.fc32 fedora 21 k kernel-tools-libs-devel x86_64 5.5.0-0.rc6.git0.1.fc32 fedora 14 k
I wonder if I'm hitting an out-of-date mirror? The other system I just updated had a 5.6.0-0.rc kernel out of the gate..
Downgrading is pretty common as the new release is frozen so new updates only go to the old releases. Although, if the other system you're referring to was an update to F32 beta and not an F31 update, then it probably was an out of date mirror.
I'm on Fedora 32 Beta now:
1. Took a few hours 2. Some Error message packed from Modular Repo 3. Other Packed Problem
About it these steps before with the following command:
sudo dnf system-upgrade download --releasever=32 --skip-broken --best --allowerasing
All working now
See my first post:
https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/...
Regards and as usual _Nice Works_ again thx
$ sudo dnf system-upgrade download --releasever=32
Before you continue ensure that your system is fully upgraded by running "dnf --refresh upgrade". Do you want to continue [y/N]: y
Adobe Systems Incorporated
7.0 kB/s | 2.9 kB 00:00 Fedora 32 openh264 (From Cisco) - x86_64
4.8 kB/s | 3.0 kB 00:00 Fedora Modular 32 - x86_64
26 kB/s | 19 kB 00:00 Fedora Modular 32 - x86_64 - Updates
28 kB/s | 22 kB 00:00 Fedora 32 - x86_64 - Updates
28 kB/s | 22 kB 00:00 Fedora 32 - x86_64
68 kB/s | 19 kB 00:00 Copr repo for gnome-shell-extensions owned by jbertozzi
1.4 kB/s | 3.3 kB 00:02 RPM Fusion for Fedora 32 - Nonfree - Updates
29 kB/s | 9.3 kB 00:00 RPM Fusion for Fedora 32 - Nonfree
34 kB/s | 10 kB 00:00 teams
12 kB/s | 2.9 kB 00:00 Error:
Problem 1: package pulseaudio-module-bluetooth-freeworld-1.3-1.fc31.x86_64 requires libpulsecore-13.0.so()(64bit), but none of the providers can be installed - pulseaudio-13.0-2.fc31.x86_64 does not belong to a distupgrade repository
- problem with installed package pulseaudio-module-bluetooth-freeworld-1.3-1.fc31.x86_64
Problem 2: package rpmfusion-free-release-31-1.noarch requires system-release(31), but none of the providers can be installed
- fedora-release-31-2.noarch does not belong to a distupgrade repository
- problem with installed package rpmfusion-free-release-31-1.noarch
(try to add '--skip-broken' to skip uninstallable packages)
On Tue, Mar 17, 2020 at 6:37 PM louzaoh@gmail.com wrote:
I'm on Fedora 32 Beta now:
- Took a few hours
- Some Error message packed from Modular Repo
- Other Packed Problem
About it these steps before with the following command:
sudo dnf system-upgrade download --releasever=32 --skip-broken --best --allowerasing
All working now
See my first post:
https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/...
Regards and as usual _Nice Works_ again thx _______________________________________________ devel mailing list -- devel@lists.fedoraproject.org To unsubscribe send an email to devel-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org
What is supposed to happen with any packages that depend on python2 that are currently installed on the system? I know that the actual packages have been retired since python2 is retired now, but currently DNF is blocking the upgrade of the system (not just marking them for removal).
Here are the three errors I get:
Problem 2: package exaile-4.0.0-3.fc31.noarch requires python2-dbus, but none of the providers can be installed - python2-dbus-1.2.8-6.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package exaile-4.0.0-3.fc31.noarch Problem 3: package system-config-keyboard-1.4.0-18.fc31.noarch requires python2-newt, but none of the providers can be installed - python2-newt-0.52.21-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package system-config-keyboard-1.4.0-18.fc31.noarch Problem 5: package wxPython-devel-3.0.2.0-26.fc31.noarch requires python2-wxpython = 3.0.2.0-26.fc31, but none of the providers can be installed - python2-wxpython-3.0.2.0-26.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package wxPython-devel-3.0.2.0-26.fc31.noarch
-Ian
On Wed, Mar 4, 2020 at 3:26 PM Miroslav Suchý msuchy@redhat.com wrote:
Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
# Run this only if you use default Fedora modules # next time you run any DNF command default modules will be enabled again sudo dnf module reset '*'
sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync
This command does not replace `dnf system-upgrade`, but it will reveal potential problems. You may also run `dnf upgrade` before running this command.
If you get this prompt:
... Total download size: XXX M Is this ok [y/N]:
you can answer N and nothing happens, no need to test the actual upgrade.
But very likely you get some dependency problem now. In that case, please report it against the appropriate package. Or against fedora-obsolete-packages if that package should be removed in Fedora 32. Please check existing reports first: https://red.ht/2kuBDPu
Thank you
-- Miroslav Suchy, RHCA Red Hat, Associate Manager ABRT/Copr, #brno, #fedora-buildsys _______________________________________________ devel mailing list -- devel@lists.fedoraproject.org To unsubscribe send an email to devel-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org
On Wed, 2020-03-04 at 18:19 +0000, Ian McInerney wrote:
What is supposed to happen with any packages that depend on python2 that are currently installed on the system? I know that the actual packages have been retired since python2 is retired now, but currently DNF is blocking the upgrade of the system (not just marking them for removal).
Something should obsolete them. Depending on circumstances and packager preferences that could be the python3 package or fedora-obsolete- packages, but all retired packages (including all script-retired python2 packages) need to be obsoleted by *something*.
On Wed, 2020-03-04 at 11:09 -0800, Adam Williamson wrote:
On Wed, 2020-03-04 at 18:19 +0000, Ian McInerney wrote:
What is supposed to happen with any packages that depend on python2 that are currently installed on the system? I know that the actual packages have been retired since python2 is retired now, but currently DNF is blocking the upgrade of the system (not just marking them for removal).
Something should obsolete them. Depending on circumstances and packager preferences that could be the python3 package or fedora-obsolete- packages, but all retired packages (including all script-retired python2 packages) need to be obsoleted by *something*.
Er, sorry, to be clear here I mean that python3-foo can obsolete python2-foo. Not that python3 can obsolete python2-foo.
Thanks.
Bugs filed for
Exaile: https://bugzilla.redhat.com/show_bug.cgi?id=1810253
wxPython-devel: https://bugzilla.redhat.com/show_bug.cgi?id=1810248
On Wed, Mar 4, 2020 at 7:12 PM Adam Williamson adamwill@fedoraproject.org wrote:
On Wed, 2020-03-04 at 11:09 -0800, Adam Williamson wrote:
On Wed, 2020-03-04 at 18:19 +0000, Ian McInerney wrote:
What is supposed to happen with any packages that depend on python2
that
are currently installed on the system? I know that the actual packages
have
been retired since python2 is retired now, but currently DNF is
blocking
the upgrade of the system (not just marking them for removal).
Something should obsolete them. Depending on circumstances and packager preferences that could be the python3 package or fedora-obsolete- packages, but all retired packages (including all script-retired python2 packages) need to be obsoleted by *something*.
Er, sorry, to be clear here I mean that python3-foo can obsolete python2-foo. Not that python3 can obsolete python2-foo. -- Adam Williamson Fedora QA Community Monkey IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net http://www.happyassassin.net
On Wed, Mar 4, 2020 at 4:25 PM Miroslav Suchý msuchy@redhat.com wrote:
Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
# Run this only if you use default Fedora modules # next time you run any DNF command default modules will be enabled again sudo dnf module reset '*'
sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync
This command does not replace `dnf system-upgrade`, but it will reveal potential problems. You may also run `dnf upgrade` before running this command.
If you get this prompt:
... Total download size: XXX M Is this ok [y/N]:
you can answer N and nothing happens, no need to test the actual upgrade.
But very likely you get some dependency problem now. In that case, please report it against the appropriate package. Or against fedora-obsolete-packages if that package should be removed in Fedora 32. Please check existing reports first: https://red.ht/2kuBDPu
Thank you
I have modular repos disabled on my systems, so I'm not getting any upgrade issues related to that. But there are a few package downgrades that are actual issues:
Downgrading: firefox x86_64 72.0.2-3.fc32 firefox 73.0.1 indeed is missing from f32+, but I think this is a known issue.
java-1.8.0-openjdk x86_64 1:1.8.0.242.b06-0.0.ea.fc32 java-1.8.0-openjdk-devel x86_64 1:1.8.0.242.b06-0.0.ea.fc32 java-1.8.0-openjdk-headless x86_64 1:1.8.0.242.b06-0.0.ea.fc32 This OpenJDK update seems to be missing from f32+ as well ...
libarchive x86_64 3.4.0-2.fc32 This seems to be fixed by an update in updates-testing.
openblas x86_64 0.3.7-2.fc32 openblas-Rblas x86_64 0.3.7-2.fc32 openblas-threads x86_64 0.3.7-2.fc32 This is also fixed by an update in updates-testing.
pciutils x86_64 3.6.3-2.fc32 pciutils-libs x86_64 3.6.3-2.fc32 This is missing an update for fedora 32 - 3.6.4 was built for f31+, but no update for f32 was created. See: https://bodhi.fedoraproject.org/updates/FEDORA-2020-875081b2ba#comment-12658...
python2-setuptools noarch 41.2.0-2.fc32 This is also a downgrade, without an update on fedora 32. But probably unfixable since newer versions of setuptools don't support python2, I think.
Fabio
-- Miroslav Suchy, RHCA Red Hat, Associate Manager ABRT/Copr, #brno, #fedora-buildsys _______________________________________________ devel mailing list -- devel@lists.fedoraproject.org To unsubscribe send an email to devel-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org
On 04. 03. 20 23:01, Fabio Valentini wrote:
python2-setuptools noarch 41.2.0-2.fc32 This is also a downgrade, without an update on fedora 32. But probably unfixable since newer versions of setuptools don't support python2, I think.
I have updated python-setuptools (both py2 and py3) in F31.
If you care, we can update python2-setuptools in F32 as well (I don't care enough). It is fixable (to ~0 benefit).
Miroslav Suchý msuchy@redhat.com writes:
Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
# Run this only if you use default Fedora modules # next time you run any DNF command default modules will be enabled again sudo dnf module reset '*'
sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync
This command does not replace `dnf system-upgrade`, but it will reveal potential problems. You may also run `dnf upgrade` before running this command.
If you get this prompt:
... Total download size: XXX M Is this ok [y/N]:
you can answer N and nothing happens, no need to test the actual upgrade.
Ran into some issues with zypper: Error: Problem 1: problem with installed package zypper-1.14.33-1.fc31.x86_64 - zypper-1.14.33-1.fc31.x86_64 does not belong to a distupgrade repository - nothing provides libzypp.so.1712()(64bit) needed by zypper-1.14.32-1.fc32.x86_64 - nothing provides libzypp.so.1712(ZYPP_plain)(64bit) needed by zypper-1.14.32-1.fc32.x86_64 Problem 2: problem with installed package zypper-log-1.14.33-1.fc31.noarch - package zypper-log-1.14.32-1.fc32.noarch requires zypper = 1.14.32-1.fc32, but none of the providers can be installed - zypper-log-1.14.33-1.fc31.noarch does not belong to a distupgrade repository - nothing provides libzypp.so.1712()(64bit) needed by zypper-1.14.32-1.fc32.x86_64 - nothing provides libzypp.so.1712(ZYPP_plain)(64bit) needed by zypper-1.14.32-1.fc32.x86_64
Reported here: https://bugzilla.redhat.com/show_bug.cgi?id=1810320
Cheers,
Dan
Error: Problem 1: problem with installed package rubygem-asciidoctor-pdf-1.5.0-0.12.beta.6.fc31.noarch - rubygem-asciidoctor-pdf-1.5.0-0.12.beta.6.fc31.noarch does not belong to a distupgrade repository - nothing provides (rubygem(treetop) >= 1.5.0 with rubygem(treetop) < 1.6) needed by rubygem-asciidoctor-pdf-1.5.0-0.11.beta.6.fc32.noarch Problem 2: problem with installed package python3-oletools-0.54.2-2.fc31.noarch - python3-oletools-0.54.2-2.fc31.noarch does not belong to a distupgrade repository - nothing provides python3.8dist(pcodedmp) >= 1.2.5 needed by python3-oletools-0.55-2.fc32.noarch I filed https://bugzilla.redhat.com/show_bug.cgi?id=1811089 for that.
Problem 3: problem with installed package python3-fsleyes-props-1.6.7-1.fc31.noarch - python3-fsleyes-props-1.6.7-1.fc31.noarch does not belong to a distupgrade repository - nothing provides python3.8dist(flseyes-widgets) >= 0.6 needed by python3-fsleyes-props-1.6.7-3.fc32.noarch Problem 4: package docker-2:1.13.1-68.git47e2230.fc30.x86_64 requires atomic-registries >= 1.19.1-6, but none of the providers can be installed - atomic-registries-1.22.1-28.gitb507039.fc30.x86_64 does not belong to a distupgrade repository - problem with installed package docker-2:1.13.1-68.git47e2230.fc30.x86_64 Hmmm.
Problem 5: package python2-qt5-devel-5.13.2-3.fc31.x86_64 requires python2-qt5(x86-64) = 5.13.2-3.fc31, but none of the providers can be installed - python2-qt5-5.13.2-3.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package python2-qt5-devel-5.13.2-3.fc31.x86_64 Problem 6: package python3-pypdf2-1.26.0-13.fc32.noarch requires python(abi) = 3.7, but none of the providers can be installed - python3-3.7.6-2.fc31.i686 does not belong to a distupgrade repository - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package python3-pypdf2-1.26.0-13.fc32.noarch Problem 7: problem with installed package minetest-0.4.17.1-5.fc31.x86_64 - package minetest-5.1.0-1.fc32.x86_64 requires libjsoncpp.so.21()(64bit), but none of the providers can be installed - minetest-0.4.17.1-5.fc31.x86_64 does not belong to a distupgrade repository - jsoncpp-1.9.1-1.fc31.x86_64 does not belong to a distupgrade repository
Problem 8: problem with installed package pdf-stapler-0.3.3-15.fc31.noarch - package pdf-stapler-1.0.0-0.3.20191215git8753251.fc32.noarch requires python3-staplelib = 1.0.0-0.3.20191215git8753251.fc32, but none of the providers can be installed - pdf-stapler-0.3.3-15.fc31.noarch does not belong to a distupgrade repository - nothing provides (python3.8dist(more-itertools) >= 2.2 with python3.8dist(more-itertools) < 6) needed by python3-staplelib-1.0.0-0.3.20191215git8753251.fc32.noarch
Maybe some issue with autogenerated requires? python3-more-itertools-0:7.2.0-4.fc32.noarch is available in F32.
Problem 9: problem with installed package python3-fsleyes-0.32.2-1.fc31.noarch - package python3-fsleyes-0.32.2-1.fc32.noarch requires python3.8dist(fsleyes-props) >= 1.6.7, but none of the providers can be installed - python3-fsleyes-0.32.2-1.fc31.noarch does not belong to a distupgrade repository - nothing provides python3.8dist(flseyes-widgets) >= 0.6 needed by python3-fsleyes-props-1.6.7-3.fc32.noarch Problem 10: problem with installed package texlive-stix-9:svn47652-15.fc31.noarch - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of the providers can be installed - texlive-stix-9:svn47652-15.fc31.noarch does not belong to a distupgrade repository - stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository Problem 11: cannot install both jsoncpp-1.9.2-2.fc32.x86_64 and jsoncpp-1.9.1-1.fc31.x86_64 - package minetest-server-5.1.0-1.fc32.x86_64 requires libjsoncpp.so.21()(64bit), but none of the providers can be installed - package cmake-3.16.4-1.fc32.x86_64 requires libjsoncpp.so.22()(64bit), but none of the providers can be installed - problem with installed package minetest-server-0.4.17.1-5.fc31.x86_64 - problem with installed package cmake-3.16.4-1.fc31.x86_64 - minetest-server-0.4.17.1-5.fc31.x86_64 does not belong to a distupgrade repository - cmake-3.16.4-1.fc31.x86_64 does not belong to a distupgrade repository
On Fri, Mar 06, 2020 at 03:09:05PM +0000, Zbigniew Jędrzejewski-Szmek wrote:
Problem 4: package docker-2:1.13.1-68.git47e2230.fc30.x86_64 requires atomic-registries >= 1.19.1-6, but none of the providers can be installed
- atomic-registries-1.22.1-28.gitb507039.fc30.x86_64 does not belong to a distupgrade repository
- problem with installed package docker-2:1.13.1-68.git47e2230.fc30.x86_64
Hmmm.
Oh, I see that this is https://bugzilla.redhat.com/show_bug.cgi?id=1804305.
Zbyszek
On Fri, Mar 06, 2020 15:09:05 +0000, Zbigniew Jędrzejewski-Szmek wrote:
Problem 3: problem with installed package python3-fsleyes-props-1.6.7-1.fc31.noarch
- python3-fsleyes-props-1.6.7-1.fc31.noarch does not belong to a distupgrade repository
- nothing provides python3.8dist(flseyes-widgets) >= 0.6 needed by python3-fsleyes-props-1.6.7-3.fc32.noarch
Problem 9: problem with installed package python3-fsleyes-0.32.2-1.fc31.noarch
- package python3-fsleyes-0.32.2-1.fc32.noarch requires python3.8dist(fsleyes-props) >= 1.6.7, but none of the providers can be installed
- python3-fsleyes-0.32.2-1.fc31.noarch does not belong to a distupgrade repository
- nothing provides python3.8dist(flseyes-widgets) >= 0.6 needed by python3-fsleyes-props-1.6.7-3.fc32.noarch
Hrm. We have:
- python3-fsleyes-0.32.2-1: https://koji.fedoraproject.org/koji/buildinfo?buildID=1468660 https://bodhi.fedoraproject.org/updates/FEDORA-2020-51bf8fc796
- python3-fsleyes-props-1.6.7-3: https://koji.fedoraproject.org/koji/buildinfo?buildID=1462642 https://bodhi.fedoraproject.org/updates/FEDORA-2020-4316570264
- python3-fsleyes-widgets-0.8.4-1: https://koji.fedoraproject.org/koji/buildinfo?buildID=1405509 https://bodhi.fedoraproject.org/updates/FEDORA-2020-4316570264
in Fedora 32. What's wrong here?
On Fri, Mar 6, 2020 at 5:21 PM Ankur Sinha sanjay.ankur@gmail.com wrote:
On Fri, Mar 06, 2020 15:09:05 +0000, Zbigniew Jędrzejewski-Szmek wrote:
Problem 3: problem with installed package
python3-fsleyes-props-1.6.7-1.fc31.noarch
- python3-fsleyes-props-1.6.7-1.fc31.noarch does not belong to a
distupgrade repository
- nothing provides python3.8dist(flseyes-widgets) >= 0.6 needed by
python3-fsleyes-props-1.6.7-3.fc32.noarch
I think it's "fls" vs "fsl" in python3.8dist(flseyes-widgets)
On Fri, Mar 06, 2020 17:25:39 +0100, Kalev Lember wrote:
On Fri, Mar 6, 2020 at 5:21 PM Ankur Sinha sanjay.ankur@gmail.com wrote:
On Fri, Mar 06, 2020 15:09:05 +0000, Zbigniew Jędrzejewski-Szmek wrote: > Problem 3: problem with installed package python3-fsleyes-props-1.6.7-1.fc31.noarch > - python3-fsleyes-props-1.6.7-1.fc31.noarch does not belong to a distupgrade repository > - nothing provides python3.8dist(flseyes-widgets) >= 0.6 needed by python3-fsleyes-props-1.6.7-3.fc32.noarchI think it's "fls" vs "fsl" in python3.8dist(flseyes-widgets)
Ugh :'(!
Fixed, built, update pushed: https://bodhi.fedoraproject.org/updates/FEDORA-2020-e92552ccc3
Have many dupes which was already reported there, so selectively:
Problem 4: problem with installed package minetest-5.1.0-1.module_f31+7240+cacc2d7d.x86_64 - package minetest-5.1.0-1.fc32.x86_64 requires libjsoncpp.so.21()(64bit), but none of the providers can be installed - minetest-5.1.0-1.module_f31+7240+cacc2d7d.x86_64 does not belong to a distupgrade repository - jsoncpp-1.9.1-1.fc31.x86_64 does not belong to a distupgrade repository Problem 6: package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) = 3.7.6-2.fc31, but none of the providers can be installed - package ulauncher-5.6.1-4.fc31.noarch requires python(abi) = 3.7, but none of the providers can be installed - python3-libs-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package ulauncher-5.6.1-4.fc31.noarch Problem 7: package cheese-2:3.34.0-3.fc32.x86_64 requires libgnome-desktop-3.so.19()(64bit), but none of the providers can be installed - cannot install both gnome-desktop3-3.35.91-1.fc32.x86_64 and gnome-desktop3-3.34.4-1.fc31.x86_64 - problem with installed package cheese-2:3.34.0-1.fc31.x86_64 - package gnome-panel-3.34.1-3.fc31.x86_64 requires libgnome-desktop-3.so.18()(64bit), but none of the providers can be installed - cheese-2:3.34.0-1.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package gnome-panel-3.34.1-3.fc31.x86_64 Problem 8: cannot install both gnome-desktop3-3.35.91-1.fc32.x86_64 and gnome-desktop3-3.34.4-1.fc31.x86_64 - package evince-3.35.92-1.fc32.x86_64 requires libgnome-desktop-3.so.19()(64bit), but none of the providers can be installed - package gnome-panel-3.34.1-3.fc31.x86_64 requires libgnome-desktop-3.so.18()(64bit), but none of the providers can be installed - problem with installed package evince-3.34.2-1.fc31.x86_64 - package gnome-applets-1:3.34.0-2.fc31.x86_64 requires gnome-panel >= 3.24.1, but none of the providers can be installed - evince-3.34.2-1.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package gnome-applets-1:3.34.0-2.fc31.x86_64 Problem 9: cannot install both jsoncpp-1.9.2-2.fc32.x86_64 and jsoncpp-1.9.1-1.fc31.x86_64 - package vtk-8.2.0-12.fc32.x86_64 requires libjsoncpp.so.22()(64bit), but none of the providers can be installed - package minetest-server-5.1.0-1.fc32.x86_64 requires libjsoncpp.so.21()(64bit), but none of the providers can be installed - problem with installed package vtk-8.2.0-6.fc31.x86_64 - problem with installed package minetest-server-5.1.0-1.module_f31+7240+cacc2d7d.x86_64 - vtk-8.2.0-6.fc31.x86_64 does not belong to a distupgrade repository - minetest-server-5.1.0-1.module_f31+7240+cacc2d7d.x86_64 does not belong to a distupgrade repository
Filed a bug: https://bugzilla.redhat.com/show_bug.cgi?id=1811103
BTW already upgraded successfully form F31 to F32.
Hello,
I did an upgrade last week, with: sudo dnf system-upgrade download --refresh --releasever=32 Except for modules everything was ok on my laptop, but I got some issues on my desktop. On my laptop, from fc32 running: sudo dnf module reset '*' sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync did solve the modules warnings.
On my desktop:
"/dev/disk/by-uuid" wasn't and still isn't populated with soft raid volumes, I had to change fstab to point to /dev/mdXXXpX to mount my home and other needed folders. From cockpit it also says "Unrecognized Data" for all my mdraid partitions.
I didn't have time to investigate more, so I jump into this mail to ask against which package should I report a bug? I have no idea who fills "/dev/disk/by-uuid".
Best regards, Alexis. On Wed, 2020-03-04 at 16:24 +0100, Miroslav Suchý wrote:
Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
# Run this only if you use default Fedora modules # next time you run any DNF command default modules will be enabled again sudo dnf module reset '*'
sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync
This command does not replace `dnf system-upgrade`, but it will reveal potential problems. You may also run `dnf upgrade` before running this command.
If you get this prompt:
... Total download size: XXX M Is this ok [y/N]:
you can answer N and nothing happens, no need to test the actual upgrade.
But very likely you get some dependency problem now. In that case, please report it against the appropriate package. Or against fedora-obsolete-packages if that package should be removed in Fedora 32. Please check existing reports first: https://red.ht/2kuBDPu
Thank you
-- Miroslav Suchy, RHCA Red Hat, Associate Manager ABRT/Copr, #brno, #fedora-buildsys _______________________________________________ devel mailing list -- devel@lists.fedoraproject.org To unsubscribe send an email to devel-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org
On Fri, 2020-03-06 at 18:07 +0100, jeandet wrote:
Hello,
I did an upgrade last week, with: sudo dnf system-upgrade download --refresh --releasever=32 Except for modules everything was ok on my laptop, but I got some issues on my desktop. On my laptop, from fc32 running: sudo dnf module reset '*' sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync did solve the modules warnings.
On my desktop:
"/dev/disk/by-uuid" wasn't and still isn't populated with soft raid volumes, I had to change fstab to point to /dev/mdXXXpX to mount my home and other needed folders. From cockpit it also says "Unrecognized Data" for all my mdraid partitions.
I didn't have time to investigate more, so I jump into this mail to ask against which package should I report a bug? I have no idea who fills "/dev/disk/by-uuid".
systemd (well, udev, which is part of systemd these days). It should be done by /usr/lib/udev/rules.d/60-persistent-storage.rules , which is part of systemd-udev. I wonder if it's possibly an issue that that runs before /usr/lib/udev/rules.d/65-md-incremental.rules , but I'm just guessing there...
On Fri, Mar 6, 2020 at 10:48 AM Adam Williamson adamwill@fedoraproject.org wrote:
On Fri, 2020-03-06 at 18:07 +0100, jeandet wrote:
Hello,
I did an upgrade last week, with: sudo dnf system-upgrade download --refresh --releasever=32 Except for modules everything was ok on my laptop, but I got some issues on my desktop. On my laptop, from fc32 running: sudo dnf module reset '*' sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync did solve the modules warnings.
On my desktop:
"/dev/disk/by-uuid" wasn't and still isn't populated with soft raid volumes, I had to change fstab to point to /dev/mdXXXpX to mount my home and other needed folders. From cockpit it also says "Unrecognized Data" for all my mdraid partitions.
I didn't have time to investigate more, so I jump into this mail to ask against which package should I report a bug? I have no idea who fills "/dev/disk/by-uuid".
systemd (well, udev, which is part of systemd these days). It should be done by /usr/lib/udev/rules.d/60-persistent-storage.rules , which is part of systemd-udev. I wonder if it's possibly an issue that that runs before /usr/lib/udev/rules.d/65-md-incremental.rules , but I'm just guessing there...
Maybe related? https://bugzilla.redhat.com/show_bug.cgi?id=1809117
On Fri, 2020-03-06 at 10:53 -0700, Chris Murphy wrote:
On Fri, Mar 6, 2020 at 10:48 AM Adam Williamson adamwill@fedoraproject.org wrote:
On Fri, 2020-03-06 at 18:07 +0100, jeandet wrote:
Hello,
I did an upgrade last week, with: sudo dnf system-upgrade download --refresh --releasever=32 Except for modules everything was ok on my laptop, but I got some issues on my desktop. On my laptop, from fc32 running: sudo dnf module reset '*' sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing- modular \ distro-sync did solve the modules warnings.
On my desktop:
"/dev/disk/by-uuid" wasn't and still isn't populated with soft raid volumes, I had to change fstab to point to /dev/mdXXXpX to mount my home and other needed folders. From cockpit it also says "Unrecognized Data" for all my mdraid partitions.
I didn't have time to investigate more, so I jump into this mail to ask against which package should I report a bug? I have no idea who fills "/dev/disk/by-uuid".
systemd (well, udev, which is part of systemd these days). It should be done by /usr/lib/udev/rules.d/60-persistent-storage.rules , which is part of systemd-udev. I wonder if it's possibly an issue that that runs before /usr/lib/udev/rules.d/65-md-incremental.rules , but I'm just guessing there...
Thank you, I made a bug repport.
Maybe related? https://bugzilla.redhat.com/show_bug.cgi?id=1809117
Yes, thank you.
-- Chris Murphy _______________________________________________ devel mailing list -- devel@lists.fedoraproject.org To unsubscribe send an email to devel-leave@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org
On Fri, 2020-03-06 at 09:47 -0800, Adam Williamson wrote:
On Fri, 2020-03-06 at 18:07 +0100, jeandet wrote:
Hello,
I did an upgrade last week, with: sudo dnf system-upgrade download --refresh --releasever=32 Except for modules everything was ok on my laptop, but I got some issues on my desktop. On my laptop, from fc32 running: sudo dnf module reset '*' sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync did solve the modules warnings.
On my desktop:
"/dev/disk/by-uuid" wasn't and still isn't populated with soft raid volumes, I had to change fstab to point to /dev/mdXXXpX to mount my home and other needed folders. From cockpit it also says "Unrecognized Data" for all my mdraid partitions.
I didn't have time to investigate more, so I jump into this mail to ask against which package should I report a bug? I have no idea who fills "/dev/disk/by-uuid".
systemd (well, udev, which is part of systemd these days). It should be done by /usr/lib/udev/rules.d/60-persistent-storage.rules , which is part of systemd-udev. I wonder if it's possibly an issue that that runs before /usr/lib/udev/rules.d/65-md-incremental.rules , but I'm just guessing there...
Aha, I think I found your bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1809117
that's probably what you're hitting.
BTW my local servlet, which is on F33, lost automounting of lvm on mdraid home
Makes systemd unit crazy, it forgets about user units, and refuses to acknowledge them even after /home is remounted manually.
(this may or may not be the same thing, F32 & 33 have not diverged too far yet)
Hi,
So, I went ahead and actually did the upgrade on three different systems: two workstation installs and a server install. I'm happy to report that the upgrade went through without any issues.
On F32, I seem to be hitting a qt-webengine bug, though. Abrt reported it here: https://bugzilla.redhat.com/show_bug.cgi?id=1812482
On Wed, 4 Mar 2020 at 15:26, Miroslav Suchý msuchy@redhat.com wrote:
Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
# Run this only if you use default Fedora modules # next time you run any DNF command default modules will be enabled again sudo dnf module reset '*'
sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \ --enablerepo=updates-testing --enablerepo=updates-testing-modular \ distro-sync
This command does not replace `dnf system-upgrade`, but it will reveal potential problems. You may also run `dnf upgrade` before running this command.
3 errors
Error: Problem 1: package VirtualBox-6.1-6.1.4_136177_fedora31-1.x86_64 requires python(abi) = 3.7, but none of the providers can be installed - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package VirtualBox-6.1-6.1.4_136177_fedora31-1.x86_64 Problem 2: package blueproximity-1.2.5-20.fc29.noarch requires pybluez, but none of the providers can be installed - pybluez-0.22-14.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package blueproximity-1.2.5-20.fc29.noarch Problem 3: problem with installed package gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires libmypaint-1.3.so.0()(64bit), but none of the providers can be installed - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade repository
Not entirely sure on how to file the bugs
Cheers, Carlos
On Thursday, 12 March 2020 09.03.38 WET Carlos "casep" Sepulveda wrote:
Error: Problem 1: package VirtualBox-6.1-6.1.4_136177_fedora31-1.x86_64 requires python(abi) = 3.7, but none of the providers can be installed
- python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
- problem with installed package
VirtualBox-6.1-6.1.4_136177_fedora31-1.x86_64 Problem 2: package blueproximity-1.2.5-20.fc29.noarch requires pybluez, but none of the providers can be installed
- pybluez-0.22-14.fc31.x86_64 does not belong to a distupgrade repository
- problem with installed package blueproximity-1.2.5-20.fc29.noarch
Problem 3: problem with installed package gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64
- package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires
libmypaint-1.3.so.0()(64bit), but none of the providers can be installed
- libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade
repository - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade repository
Not entirely sure on how to file the bugs
Did you reset the modules?
sudo dnf module reset '*'
I am asking because I forgot the first time I ran the command. :-)
On Thu, Mar 12, 2020 at 09:22:45AM +0000, José Abílio Matos wrote:
On Thursday, 12 March 2020 09.03.38 WET Carlos "casep" Sepulveda wrote:
Error: Problem 1: package VirtualBox-6.1-6.1.4_136177_fedora31-1.x86_64 requires python(abi) = 3.7, but none of the providers can be installed
- python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
- problem with installed package
That's not a Fedora package... You might need to remove it temporarily.
Problem 2: package
blueproximity-1.2.5-20.fc29.noarch requires pybluez, but none of the providers can be installed
- pybluez-0.22-14.fc31.x86_64 does not belong to a distupgrade repository
- problem with installed package blueproximity-1.2.5-20.fc29.noarch
I added blueproximity to fedora-obsolete-packages now for F32 and rawhide.
Problem 3: problem with installed package gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64
- package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires
libmypaint-1.3.so.0()(64bit), but none of the providers can be installed
- libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade
repository - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade repository
Not entirely sure on how to file the bugs
Did you reset the modules?
sudo dnf module reset '*'
Yeah, that should solve the gimp problem.
Zbyszek
Problem: conflicting requests - nothing provides module(platform:f31) needed by module libgit2:0.27:3120190407181414:f636be4b-0.x86_64 Error: Problem 1: package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2-backports-functools_lru_cache, but none of the providers can be installed - package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2.7dist(backports.functools-lru-cache), but none of the providers can be installed - python2-backports-functools_lru_cache-1.5-6.fc31.noarch does not belong to a distupgrade repository - problem with installed package python2-matplotlib-2.2.5-1.fc31.x86_64 Problem 2: package python3-getdevinfo-1.0.5-1.1.noarch requires python(abi) = 3.7, but none of the providers can be installed - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package python3-getdevinfo-1.0.5-1.1.noarch Problem 3: package rhsm-api-client-1.0-1.fc29.noarch requires python-futures, but none of the providers can be installed - python2-futures-3.3.0-1.fc31.noarch does not belong to a distupgrade repository - problem with installed package rhsm-api-client-1.0-1.fc29.noarch Problem 4: package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires libmypaint-1.3.so.0()(64bit), but none of the providers can be installed - problem with installed package gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade repository Problem 5: package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2-cycler >= 0.10.0, but none of the providers can be installed - package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2.7dist(cycler) >= 0.10, but none of the providers can be installed - package python2-matplotlib-tk-2.2.5-1.fc31.x86_64 requires python2-matplotlib(x86-64) = 2.2.5-1.fc31, but none of the providers can be installed - python2-cycler-0.10.0-10.fc31.noarch does not belong to a distupgrade repository - problem with installed package python2-matplotlib-tk-2.2.5-1.fc31.x86_64 Problem 6: package python3-getdevinfo-1.0.5-1.1.noarch requires python(abi) = 3.7, but none of the providers can be installed - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) = 3.7.6-2.fc31, but none of the providers can be installed - package ddrescue-gui-2.0.2-1.1.noarch requires python3-getdevinfo, but none of the providers can be installed - python3-libs-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package ddrescue-gui-2.0.2-1.1.noarch (try to add '--skip-broken' to skip uninstallable packages)
results from my upgrade attempt today
Chyba: Problém 1: problem with installed package hgview-1.13.0-1.fc31.noarch - hgview-1.13.0-1.fc31.noarch does not belong to a distupgrade repository - nothing provides python3-qscintilla needed by hgview-1.13.1-1.fc32.noarch
Problém 3: package python2-qpid-proton-0.30.0-1.fc31.x86_64 requires qpid-proton-c(x86-64) = 0.30.0-1.fc31, but none of the providers can be installed - qpid-proton-c-0.30.0-1.fc31.x86_64 does not belong to a distupgrade repository - problem with installed package python2-qpid-proton-0.30.0-1.fc31.x86_64
Dan
On 26. 03. 20 11:13, Dan Horák wrote:
results from my upgrade attempt today
Chyba: Problém 1: problem with installed package hgview-1.13.0-1.fc31.noarch
- hgview-1.13.0-1.fc31.noarch does not belong to a distupgrade repository
- nothing provides python3-qscintilla needed by hgview-1.13.1-1.fc32.noarch
This seem like a problem in hgview. It has broken deps:
$ mock -r fedora-32-x86_64 install hgview Error: Problem: conflicting requests - nothing provides python3-qscintilla needed by hgview-1.13.1-1.fc32.noarch
Please report this as a bug to hgview.
Problém 3: package python2-qpid-proton-0.30.0-1.fc31.x86_64 requires qpid-proton-c(x86-64) = 0.30.0-1.fc31, but none of the providers can be installed
- qpid-proton-c-0.30.0-1.fc31.x86_64 does not belong to a distupgrade repository
- problem with installed package python2-qpid-proton-0.30.0-1.fc31.x86_64
The version needs to be updated in fedora-obsolete-packages:
$ repoquery --repo={fedora,updates{,-testing}} --releasever 32 --latest=1 --obsoletes fedora-obsolete-packages | grep python2-qpid-proton python2-qpid-proton < 0.29.0-2
I will do that.
-
Adam Williamson -
Alec Leamas -
Ankur Sinha -
Antonio Romito -
Artem Tim -
Artur Iwicki -
Carlos "casep" Sepulveda -
chedi toueiti -
Chris Murphy -
Dan Horák -
Dan Čermák -
Dominik 'Rathann' Mierzejewski -
Fabio Valentini -
Ian McInerney -
jeandet -
Jerry James -
José Abílio Matos -
Jérémy Bertozzi -
Kalev Lember -
louzaoh＠gmail.com -
Marcin Juszkiewicz -
Mauricio Tavares -
Miro Hrončok -
Miroslav Suchý -
Nathanael D. Noblet -
Nicolas Mailhot -
Robert-André Mauchin -
Samuel Sieb -
Solomon Peachy -
stan -
Zbigniew Jędrzejewski-Szmek