Donate 1 minute of your time to test upgrades from F31 to F32

[Miroslav Suchý]

Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:

  # Run this only if you use default Fedora modules
  # next time you run any DNF command default modules will be enabled again
  sudo dnf module reset '*'

  sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
    --enablerepo=updates-testing --enablerepo=updates-testing-modular \
    distro-sync

This command does not replace `dnf system-upgrade`, but it will reveal potential problems.
You may also run `dnf
upgrade` before running this command.


If you get this prompt:

  ...
  Total download size: XXX M
  Is this ok [y/N]:

you can answer N and nothing happens, no need to test the actual upgrade.

But very likely you get some dependency problem now. In that case, please report it
against the appropriate package. Or
against fedora-obsolete-packages if that package should be removed in Fedora 32. Please
check existing reports first:
https://red.ht/2kuBDPu

Thank you

-- 
Miroslav Suchy, RHCA
Red Hat, Associate Manager ABRT/Copr, #brno, #fedora-buildsys

[Marcin Juszkiewicz]

W dniu 04.03.2020 o 16:24, Miroslav Suchý pisze:
>  Do you want to make Fedora 32 better? Please spend 1 minute of your
> time and try to run:
>  
>    # Run this only if you use default Fedora modules
>    # next time you run any DNF command default modules will be enabled again
>    sudo dnf module reset '*'
>  
>    sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
>      --enablerepo=updates-testing --enablerepo=updates-testing-modular \
>      distro-sync
>   
 Problem: package moodbar-0.1.2-19.fc29.x86_64 requires libgstbase-0.10.so.0()(64bit), but
none of the providers can be installed
  - package moodbar-0.1.2-19.fc29.x86_64 requires libgstreamer-0.10.so.0()(64bit), but
none of the providers can be installed
  - gstreamer-0.10.36-24.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package moodbar-0.1.2-19.fc29.x86_64

Removed moodbar and next try was fine.

[Miro Hrončok]

On 04. 03. 20 16:24, Miroslav Suchý wrote:
>  Do you want to make Fedora 32 better? Please spend 1 minute of your
> time and try to run:
>  
>     # Run this only if you use default Fedora modules
>     # next time you run any DNF command default modules will be enabled again
>     sudo dnf module reset '*'
>  
>     sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
>       --enablerepo=updates-testing --enablerepo=updates-testing-modular \
>       distro-sync
>  
>  This command does not replace `dnf system-upgrade`, but it will reveal potential
> problems. You may also run `dnf
>  upgrade` before running this command.
>  
>  
>  If you get this prompt:
>  
>     ...
>     Total download size: XXX M
>     Is this ok [y/N]:
>  
>  you can answer N and nothing happens, no need to test the actual upgrade.
>  
>  But very likely you get some dependency problem now. In that case, please report it
> against the appropriate package. Or
>  against fedora-obsolete-packages if that package should be removed in Fedora 32. Please
> check existing reports first:
>  https://red.ht/2kuBDPu 
There is also:

https://bugzilla.redhat.com/show_bug.cgi?id=1804305
moby-engine does not obsolete proper version of docker, upgrading to Fedora 32 
is blocked

And of course internal Red Hat tools (like rhpkg) blow up as always.

-- 
Miro Hrončok
--
Phone: [phone]
IRC: mhroncok

[Mauricio Tavares]

On Wed, Mar 4, 2020 at 10:25 AM Miroslav Suchý <msuchy(a)redhat.com&gt; wrote:
>  Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
>
>    # Run this only if you use default Fedora modules
>    # next time you run any DNF command default modules will be enabled again
>    sudo dnf module reset '*'
>
>    sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
>      --enablerepo=updates-testing --enablerepo=updates-testing-modular \
>      distro-sync
>
>  This command does not replace `dnf system-upgrade`, but it will reveal potential
> problems. You may also run `dnf
>  upgrade` before running this command.
>
>
>  If you get this prompt:
>
>    ...
>    Total download size: XXX M
>    Is this ok [y/N]:
>
>  you can answer N and nothing happens, no need to test the actual upgrade.
>
>  But very likely you get some dependency problem now. In that case, please report it
> against the appropriate package. Or
>  against fedora-obsolete-packages if that package should be removed in Fedora 32. Please
> check existing reports first:
>  https://red.ht/2kuBDPu
>
>  Thank you
>  
      I did not get any errors (stopped before letting it do the
update), but I would like to know why it does it want to downgrade two
packages:

[root@localhost ~]# sudo dnf module reset '*'
Last metadata expiration check: 1:35:23 ago on Wed 04 Mar 2020 09:09:41 AM EST.
Dependencies resolved.
Nothing to do.
Complete!
[root@localhost ~]#   sudo dnf --releasever=32 --setopt=module_platform_id=platf
orm:f32 \
>      --enablerepo=updates-testing --enablerepo=updates-testing-modular
> \
>      distro-sync 
Fedora Modular 32 - x86_64                      1.8 MB/s | 4.9 MB  
  00:02
Fedora Modular 32 - x86_64 - Updates            599  B/s | 257  B     00:00
Fedora Modular 32 - x86_64 - Test Updates       350 kB/s | 472 kB     00:01
Fedora 32 - x86_64 - Test Updates               1.8 MB/s | 4.8 MB     00:02
Fedora 32 - x86_64 - Updates                    336  B/s | 257  B     00:00
Fedora 32 - x86_64                              6.4 MB/s |  68 MB     00:10
Dependencies resolved.
================================================================================
 Package                   Arch   Version                 Repository       Size
================================================================================
Installing:
 kernel                    x86_64 5.6.0-0.rc3.git0.1.fc32 fedora           18 k
 kernel-core               x86_64 5.6.0-0.rc3.git0.1.fc32 fedora           32 M
 kernel-modules            x86_64 5.6.0-0.rc3.git0.1.fc32 fedora           29 M
[...]
Removing:
 kernel                    x86_64 5.3.7-301.fc31          @anaconda         0
 kernel-core               x86_64 5.3.7-301.fc31          @anaconda        67 M
 kernel-modules            x86_64 5.3.7-301.fc31          @anaconda        28 M
Downgrading:
 bsdtar                    x86_64 3.4.0-2.fc32            fedora           65 k
 libarchive                x86_64 3.4.0-2.fc32            fedora          388 k

Transaction Summary
================================================================================
Install     16 Packages
Upgrade    463 Packages
Remove       3 Packages
Downgrade    2 Packages

Total download size: 425 M
Is this ok [y/N]: n
Operation aborted.
[root@localhost ~]#

> --
> Miroslav Suchy, RHCA
> Red Hat, Associate Manager ABRT/Copr, #brno, #fedora-buildsys
> _______________________________________________
> devel mailing list -- devel(a)lists.fedoraproject.org
> To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
https://lists.fedoraproject.org/archives/list/[e-mail]

[Artur Iwicki]

Problem with installed package mumble-1.2.19-15.fc31.x86_64
  - package mumble-1.2.19-15.fc31.x86_64 requires libprotobuf.so.17()(64bit), but none of
the providers can be installed
  - protobuf-3.6.1-5.fc31.x86_64 does not belong to a distupgrade repository
  - package protobuf-3.6.1-6.module_f32+6163+c0e6dcb2.x86_64 is filtered out by modular
filtering

[José Abílio Matos]

On Wednesday, 4 March 2020 15.24.58 WET Miroslav Suchý wrote:
>  Do you want to make Fedora 32 better? Please spend 1 minute of your
> time and
>  try to run:
>  
>    # Run this only if you use default Fedora modules
>    # next time you run any DNF command default modules will be enabled again
>    sudo dnf module reset '*'
>  
>    sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
>      --enablerepo=updates-testing --enablerepo=updates-testing-modular \
>      distro-sync
>  
>  This command does not replace `dnf system-upgrade`, but it will reveal
>  potential problems. You may also run `dnf upgrade` before running this
>  command. 
OK, I have just 15 problems. :-)

 Problem: conflicting requests
  - nothing provides module(platform:f31) needed by module 
libgit2:0.27:3120190407181414:f636be4b-0.x86_64
Error: 
 Problem 1: package python2-pytest-cov-2.8.1-5.fc31.noarch requires 
python2.7dist(coverage) >= 4.4, but none of the providers can be installed
  - python2-coverage-4.5.4-2.fc31.x86_64 does not belong to a distupgrade 
repository
  - problem with installed package python2-pytest-cov-2.8.1-5.fc31.noarch
 Problem 2: package python3-markups-2.0.0-10.fc29.noarch requires python(abi) 
= 3.7, but none of the providers can be installed
  - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package python3-markups-2.0.0-10.fc29.noarch
 Problem 3: problem with installed package pdf-stapler-0.3.3-15.fc31.noarch
  - package pdf-stapler-1.0.0-0.3.20191215git8753251.fc32.noarch requires 
python3-staplelib = 1.0.0-0.3.20191215git8753251.fc32, but none of the 
providers can be installed
  - pdf-stapler-0.3.3-15.fc31.noarch does not belong to a distupgrade 
repository
  - nothing provides (python3.8dist(more-itertools) >= 2.2 with 
python3.8dist(more-itertools) < 6) needed by python3-
staplelib-1.0.0-0.3.20191215git8753251.fc32.noarch
 Problem 4: package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) 
= 3.7.6-2.fc31, but none of the providers can be installed
  - package retext-7.0.3-3.fc29.noarch requires python(abi) = 3.7, but none of 
the providers can be installed
  - python3-libs-3.7.6-2.fc31.x86_64 does not belong to a distupgrade 
repository
  - problem with installed package retext-7.0.3-3.fc29.noarch
 Problem 5: package ktp-common-internals-19.12.2-1.fc32.x86_64 requires 
libtelepathy-qt5-service.so.0()(64bit), but none of the providers can be 
installed
  - problem with installed package ktp-common-internals-19.12.1-1.fc31.x86_64
  - telepathy-qt5-0.9.7-9.fc31.x86_64 does not belong to a distupgrade 
repository
  - ktp-common-internals-19.12.1-1.fc31.x86_64 does not belong to a 
distupgrade repository
 Problem 6: package texlive-collection-fontsextra-9:svn51763-18.fc32.noarch 
requires texlive-stix, but none of the providers can be installed
  - problem with installed package texlive-collection-
fontsextra-9:svn51763-15.fc31.noarch
  - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, 
but none of the providers can be installed
  - texlive-stix-9:svn47652-15.fc31.noarch does not belong to a distupgrade 
repository
  - texlive-collection-fontsextra-9:svn51763-15.fc31.noarch does not belong to 
a distupgrade repository
  - stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade 
repository
 Problem 7: package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, 
but none of the providers can be installed
  - problem with installed package mp-3.1.0-23.20161124git1f39801.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - mp-3.1.0-23.20161124git1f39801.fc31.x86_64 does not belong to a 
distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 8: package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()
(64bit), but none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - problem with installed package coin-or-Cbc-2.10.3-2.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - gsl-2.5-2.fc31.x86_64 does not belong to a distupgrade repository
  - coin-or-Cbc-2.10.3-2.fc31.x86_64 does not belong to a distupgrade 
repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 9: problem with installed package 
gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64
  - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires 
libmypaint-1.3.so.0()(64bit), but none of the providers can be installed
  - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository
  - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a 
distupgrade repository
 Problem 10: problem with installed package texlive-
stix-9:svn47652-15.fc31.noarch
  - package texlive-stix-9:svn47652-15.fc31.noarch requires stix-math-fonts, 
but none of the providers can be installed
  - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, 
but none of the providers can be installed
  - package stix-math-fonts-1.1.0-15.fc31.noarch requires stix-fonts = 
1.1.0-15.fc31, but none of the providers can be installed
  - stix-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade 
repository
 Problem 11: package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()
(64bit), but none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package asymptote-2.62-2.fc32.x86_64 requires libgsl.so.25()(64bit), but 
none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - problem with installed package coin-or-Clp-1.17.3-3.fc31.x86_64
  - problem with installed package asymptote-2.59-2.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - coin-or-Clp-1.17.3-3.fc31.x86_64 does not belong to a distupgrade 
repository
  - asymptote-2.59-2.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 12: package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libClp.so.1()
(64bit), but none of the providers can be installed
  - package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libOsiClp.so.1()(64bit), 
but none of the providers can be installed
  - package coin-or-Clp-1.17.3-3.fc31.x86_64 requires libCbc.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package calligra-sheets-libs-3.1.0-19.fc32.x86_64 requires libgsl.so.25()
(64bit), but none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - problem with installed package coin-or-Cgl-0.60.2-2.fc31.x86_64
  - problem with installed package calligra-sheets-libs-3.1.0-15.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - coin-or-Cgl-0.60.2-2.fc31.x86_64 does not belong to a distupgrade 
repository
  - calligra-sheets-libs-3.1.0-15.fc31.x86_64 does not belong to a distupgrade 
repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 13: package opencv-core-4.2.0-3.fc32.x86_64 requires libClp.so.1()
(64bit), but none of the providers can be installed
  - package coin-or-Clp-1.17.3-3.fc31.x86_64 requires libCbc.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package enblend-4.2-16.fc32.x86_64 requires libgsl.so.25()(64bit), but 
none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - problem with installed package opencv-core-3.4.8-1.fc31.x86_64
  - problem with installed package enblend-4.2-14.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - opencv-core-3.4.8-1.fc31.x86_64 does not belong to a distupgrade 
repository
  - enblend-4.2-14.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 14: package opencv-core-4.2.0-3.fc32.x86_64 requires libClp.so.1()
(64bit), but none of the providers can be installed
  - package coin-or-Clp-1.17.3-3.fc31.x86_64 requires libCbc.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libopencv_core.so.
4.2()(64bit), but none of the providers can be installed
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libopencv_highgui.so.
4.2()(64bit), but none of the providers can be installed
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libopencv_imgproc.so.
4.2()(64bit), but none of the providers can be installed
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires 
libopencv_imgcodecs.so.4.2()(64bit), but none of the providers can be 
installed
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires 
libopencv_features2d.so.4.2()(64bit), but none of the providers can be 
installed
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libopencv_flann.so.
4.2()(64bit), but none of the providers can be installed
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libopencv_ml.so.4.2()
(64bit), but none of the providers can be installed
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires 
libopencv_objdetect.so.4.2()(64bit), but none of the providers can be 
installed
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libopencv_video.so.
4.2()(64bit), but none of the providers can be installed
  - package gsl-devel-2.6-2.fc32.x86_64 requires gsl(x86-64) = 2.6-2.fc32, but 
none of the providers can be installed
  - package gsl-devel-2.6-2.fc32.x86_64 requires libgsl.so.25()(64bit), but 
none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - problem with installed package opencv-contrib-3.4.8-1.fc31.x86_64
  - problem with installed package gsl-devel-2.5-2.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - opencv-contrib-3.4.8-1.fc31.x86_64 does not belong to a distupgrade 
repository
  - gsl-devel-2.5-2.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 15: problem with installed package python3-devel-3.7.6-2.fc31.x86_64
  - package python3-devel-3.8.2-2.fc32.x86_64 conflicts with python3 < 
3.8.2-2.fc32 provided by python3-3.7.6-2.fc31.x86_64
  - package python3-devel-3.8.2~rc2-1.fc32.x86_64 conflicts with python3 < 
3.8.2~rc2-1.fc32 provided by python3-3.7.6-2.fc31.x86_64
  - problem with installed package python3-codacy-
coverage-1.3.11-1.fc30.noarch
  - package python3-codacy-coverage-1.3.11-1.fc30.noarch requires python(abi) 
= 3.7, but none of the providers can be installed
  - python3-devel-3.7.6-2.fc31.x86_64 does not belong to a distupgrade 
repository
(try to add '--allowerasing' to command line to replace conflicting packages 
or '--skip-broken' to skip uninstallable packages)

-- 
José Abílio

[José Abílio Matos]

On Wednesday, 4 March 2020 15.24.58 WET Miroslav Suchý wrote:
>  Do you want to make Fedora 32 better? Please spend 1 minute of your
> time and
>  try to run:
>  
>    # Run this only if you use default Fedora modules
>    # next time you run any DNF command default modules will be enabled again
>    sudo dnf module reset '*'
>  
>    sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
>      --enablerepo=updates-testing --enablerepo=updates-testing-modular \
>      distro-sync
>  
>  This command does not replace `dnf system-upgrade`, but it will reveal
>  potential problems. You may also run `dnf upgrade` before running this
>  command. 
Take 2 on another machine (now with 44, not independent, problems):

Modular dependency problems:

 Problem 1: conflicting requests
  - nothing provides module(platform:f31) needed by module fish:
3:3120190219150858:6045e57d-0.x86_64
 Problem 2: conflicting requests
  - nothing provides module(platform:f31) needed by module 
libgit2:0.28:3120190812145959:f636be4b-0.x86_64
Error: 
 Problem 1: package R-maanova-1.50.0-4.fc31.x86_64 requires libRlapack.so()
(64bit), but none of the providers can be installed
  - R-core-3.6.2-1.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package R-maanova-1.50.0-4.fc31.x86_64
 Problem 2: package clutter-gst-1.6.0-20.fc28.x86_64 requires 
libgstbase-0.10.so.0()(64bit), but none of the providers can be installed
  - package clutter-gst-1.6.0-20.fc28.x86_64 requires libgstreamer-0.10.so.0()
(64bit), but none of the providers can be installed
  - gstreamer-0.10.36-24.fc31.x86_64 does not belong to a distupgrade 
repository
  - problem with installed package clutter-gst-1.6.0-20.fc28.x86_64
 Problem 3: package compat-libmpc-1.1.0-4.fc31.x86_64 requires libmpfr.so.4()
(64bit), but none of the providers can be installed
  - mpfr-3.1.6-5.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package compat-libmpc-1.1.0-4.fc31.x86_64
 Problem 4: package gnome-python2-desktop-2.32.0-38.fc31.x86_64 requires 
gnome-python2-canvas >= 2.10.0, but none of the providers can be installed
  - gnome-python2-canvas-2.28.1-30.fc31.x86_64 does not belong to a 
distupgrade repository
  - problem with installed package gnome-python2-desktop-2.32.0-38.fc31.x86_64
 Problem 5: package gstreamer-rtsp-0.10.8-25.fc31.x86_64 requires 
libgstapp-0.10.so.0()(64bit), but none of the providers can be installed
  - package gstreamer-rtsp-0.10.8-25.fc31.x86_64 requires libgstrtp-0.10.so.
0()(64bit), but none of the providers can be installed
  - package gstreamer-rtsp-0.10.8-25.fc31.x86_64 requires libgstrtsp-0.10.so.
0()(64bit), but none of the providers can be installed
  - package gstreamer-rtsp-0.10.8-25.fc31.x86_64 requires libgstsdp-0.10.so.
0()(64bit), but none of the providers can be installed
  - gstreamer-plugins-base-0.10.36-24.fc31.x86_64 does not belong to a 
distupgrade repository
  - problem with installed package gstreamer-rtsp-0.10.8-25.fc31.x86_64
 Problem 6: package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2-
backports-functools_lru_cache, but none of the providers can be installed
  - package python2-matplotlib-2.2.5-1.fc31.x86_64 requires 
python2.7dist(backports.functools-lru-cache), but none of the providers can be 
installed
  - python2-backports-functools_lru_cache-1.5-6.fc31.noarch does not belong to 
a distupgrade repository
  - problem with installed package python2-matplotlib-2.2.5-1.fc31.x86_64
 Problem 7: package system-config-firewall-tui-1.2.29-21.fc29.noarch requires 
python2-newt, but none of the providers can be installed
  - python2-newt-0.52.21-2.fc31.x86_64 does not belong to a distupgrade 
repository
  - problem with installed package system-config-firewall-
tui-1.2.29-21.fc29.noarch
 Problem 8: package system-config-keyboard-1.4.0-18.fc31.noarch requires 
system-config-keyboard-base = 1.4.0-18.fc31, but none of the providers can be 
installed
  - system-config-keyboard-base-1.4.0-18.fc31.noarch does not belong to a 
distupgrade repository
  - problem with installed package system-config-keyboard-1.4.0-18.fc31.noarch
 Problem 9: package texlive-collection-
plainextra-6:svn37156.0-52.20160520.fc28.noarch requires tex-texinfo, but none 
of the providers can be installed
  - texlive-texinfo-9:svn51312-15.fc31.noarch does not belong to a distupgrade 
repository
  - problem with installed package texlive-collection-
plainextra-6:svn37156.0-52.20160520.fc28.noarch
 Problem 10: problem with installed package grpc-1.20.1-2.fc31.x86_64
  - package grpc-1.26.0-2.fc32.x86_64 requires libprotobuf.so.22()(64bit), but 
none of the providers can be installed
  - grpc-1.20.1-2.fc31.x86_64 does not belong to a distupgrade repository
  - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
 Problem 11: package gstreamer-0.10.36-24.fc31.x86_64 requires gstreamer-tools 
> = 0.10.36, but none of the providers can be installed 
  -
package moodbar-0.1.2-19.fc29.x86_64 requires libgstbase-0.10.so.0()
(64bit), but none of the providers can be installed
  - package moodbar-0.1.2-19.fc29.x86_64 requires libgstreamer-0.10.so.0()
(64bit), but none of the providers can be installed
  - gstreamer-tools-0.10.36-24.fc31.x86_64 does not belong to a distupgrade 
repository
  - problem with installed package moodbar-0.1.2-19.fc29.x86_64
 Problem 12: problem with installed package opencv-contrib-3.4.8-1.fc31.x86_64
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22()
(64bit), but none of the providers can be installed
  - opencv-contrib-3.4.8-1.fc31.x86_64 does not belong to a distupgrade 
repository
  - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
 Problem 13: problem with installed package pdf-stapler-0.3.3-15.fc31.noarch
  - package pdf-stapler-1.0.0-0.3.20191215git8753251.fc32.noarch requires 
python3-staplelib = 1.0.0-0.3.20191215git8753251.fc32, but none of the 
providers can be installed
  - pdf-stapler-0.3.3-15.fc31.noarch does not belong to a distupgrade 
repository
  - nothing provides (python3.8dist(more-itertools) >= 2.2 with 
python3.8dist(more-itertools) < 6) needed by python3-
staplelib-1.0.0-0.3.20191215git8753251.fc32.noarch
 Problem 14: package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2-
cycler >= 0.10.0, but none of the providers can be installed
  - package python2-matplotlib-2.2.5-1.fc31.x86_64 requires 
python2.7dist(cycler) >= 0.10, but none of the providers can be installed
  - package python2-matplotlib-tk-2.2.5-1.fc31.x86_64 requires python2-
matplotlib(x86-64) = 2.2.5-1.fc31, but none of the providers can be installed
  - python2-cycler-0.10.0-10.fc31.noarch does not belong to a distupgrade 
repository
  - problem with installed package python2-matplotlib-tk-2.2.5-1.fc31.x86_64
 Problem 15: package ktp-common-internals-19.12.2-1.fc32.x86_64 requires 
libtelepathy-qt5-service.so.0()(64bit), but none of the providers can be 
installed
  - problem with installed package ktp-common-internals-19.12.1-1.fc31.x86_64
  - telepathy-qt5-0.9.7-9.fc31.x86_64 does not belong to a distupgrade 
repository
  - ktp-common-internals-19.12.1-1.fc31.x86_64 does not belong to a 
distupgrade repository
 Problem 16: package texlive-collection-fontsextra-9:svn51763-18.fc32.noarch 
requires texlive-stix, but none of the providers can be installed
  - problem with installed package texlive-collection-
fontsextra-9:svn51763-15.fc31.noarch
  - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, 
but none of the providers can be installed
  - texlive-stix-9:svn47652-15.fc31.noarch does not belong to a distupgrade 
repository
  - texlive-collection-fontsextra-9:svn51763-15.fc31.noarch does not belong to 
a distupgrade repository
  - stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade 
repository
 Problem 17: package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires 
jacop, but none of the providers can be installed
  - problem with installed package mp-3.1.0-23.20161124git1f39801.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - mp-3.1.0-23.20161124git1f39801.fc31.x86_64 does not belong to a 
distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 18: package opencv-core-4.2.0-3.fc32.x86_64 requires 
libopencv_calib3d.so.4.2()(64bit), but none of the providers can be installed
  - package opencv-core-4.2.0-3.fc32.x86_64 requires libopencv_optflow.so.
4.2()(64bit), but none of the providers can be installed
  - problem with installed package opencv-core-3.4.8-1.fc31.x86_64
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22()
(64bit), but none of the providers can be installed
  - opencv-core-3.4.8-1.fc31.x86_64 does not belong to a distupgrade 
repository
  - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
 Problem 19: package opencv-4.2.0-3.fc32.x86_64 requires libopencv_aruco.so.
4.2()(64bit), but none of the providers can be installed
  - package opencv-4.2.0-3.fc32.x86_64 requires libopencv_calib3d.so.4.2()
(64bit), but none of the providers can be installed
  - package opencv-4.2.0-3.fc32.x86_64 requires libopencv_xobjdetect.so.4.2()
(64bit), but none of the providers can be installed
  - problem with installed package opencv-3.4.8-1.fc31.x86_64
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22()
(64bit), but none of the providers can be installed
  - opencv-3.4.8-1.fc31.x86_64 does not belong to a distupgrade repository
  - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
 Problem 20: package digikam-libs-7.0.0-0.3.beta2.fc32.x86_64 requires 
libopencv_dnn.so.4.2()(64bit), but none of the providers can be installed
  - problem with installed package digikam-libs-6.4.0-2.fc31.x86_64
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22()
(64bit), but none of the providers can be installed
  - digikam-libs-6.4.0-2.fc31.x86_64 does not belong to a distupgrade 
repository
  - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
 Problem 21: package python3-grpcio-1.26.0-2.fc32.x86_64 requires grpc(x86-64) 
= 1.26.0-2.fc32, but none of the providers can be installed
  - problem with installed package python3-grpcio-1.20.1-2.fc31.x86_64
  - package grpc-1.26.0-2.fc32.x86_64 requires libprotobuf.so.22()(64bit), but 
none of the providers can be installed
  - python3-grpcio-1.20.1-2.fc31.x86_64 does not belong to a distupgrade 
repository
  - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
 Problem 22: package R-ape-5.3-4.fc32.x86_64 requires libRlapack.so()(64bit), 
but none of the providers can be installed
  - package R-core-3.6.2-1.fc31.x86_64 requires libRmath(x86-64) = 
3.6.2-1.fc31, but none of the providers can be installed
  - problem with installed package R-ape-5.3-3.fc31.x86_64
  - libRmath-3.6.2-1.fc31.x86_64 does not belong to a distupgrade repository
  - R-ape-5.3-3.fc31.x86_64 does not belong to a distupgrade repository
 Problem 23: package ceph-mgr-2:14.2.7-2.fc32.x86_64 requires python3-grpcio, 
but none of the providers can be installed
  - package python3-grpcio-1.26.0-2.fc32.x86_64 requires grpc(x86-64) = 
1.26.0-2.fc32, but none of the providers can be installed
  - package python3-grpcio-1.20.1-2.fc31.x86_64 requires python(abi) = 3.7, 
but none of the providers can be installed
  - problem with installed package ceph-mgr-2:14.2.7-2.fc31.x86_64
  - package grpc-1.26.0-2.fc32.x86_64 requires libprotobuf.so.22()(64bit), but 
none of the providers can be installed
  - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
  - ceph-mgr-2:14.2.7-2.fc31.x86_64 does not belong to a distupgrade 
repository
  - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
 Problem 24: package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()
(64bit), but none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - problem with installed package coin-or-Cbc-2.10.3-2.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - gsl-2.5-2.fc31.x86_64 does not belong to a distupgrade repository
  - coin-or-Cbc-2.10.3-2.fc31.x86_64 does not belong to a distupgrade 
repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 25: package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires 
libdigikamcore.so.7.0.0()(64bit), but none of the providers can be installed
  - package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires 
libdigikamdatabase.so.7.0.0()(64bit), but none of the providers can be 
installed
  - package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires libdigikamgui.so.
7.0.0()(64bit), but none of the providers can be installed
  - package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires digikam-libs(x86-64) 
= 7.0.0-0.3.beta2.fc32, but none of the providers can be installed
  - package digikam-libs-7.0.0-0.3.beta2.fc32.x86_64 requires 
libopencv_dnn.so.4.2()(64bit), but none of the providers can be installed
  - problem with installed package digikam-6.4.0-2.fc31.x86_64
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22()
(64bit), but none of the providers can be installed
  - digikam-6.4.0-2.fc31.x86_64 does not belong to a distupgrade repository
  - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
 Problem 26: problem with installed package python2-newt-0.52.21-2.fc31.x86_64
  - package fedora-obsolete-packages-32-37.noarch obsoletes gstreamer < 
0.10.36-27 provided by gstreamer-0.10.36-24.fc31.x86_64
  - package fedora-obsolete-packages-32-36.noarch obsoletes gstreamer < 
0.10.36-27 provided by gstreamer-0.10.36-24.fc31.x86_64
  - package python2-newt-0.52.21-2.fc31.x86_64 requires newt(x86-64) = 
0.52.21-2.fc31, but none of the providers can be installed
  - package rstudio-1.1.453-1.x86_64 requires gstreamer, but none of the 
providers can be installed
  - newt-0.52.21-2.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package rstudio-1.1.453-1.x86_64
 Problem 27: package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires 
libdigikamcore.so.7.0.0()(64bit), but none of the providers can be installed
  - package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires 
libdigikamdatabase.so.7.0.0()(64bit), but none of the providers can be 
installed
  - package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires libdigikamgui.so.
7.0.0()(64bit), but none of the providers can be installed
  - package digikam-7.0.0-0.3.beta2.fc32.x86_64 requires digikam-libs(x86-64) 
= 7.0.0-0.3.beta2.fc32, but none of the providers can be installed
  - package digikam-doc-7.0.0-0.3.beta2.fc32.noarch requires digikam = 
7.0.0-0.3.beta2.fc32, but none of the providers can be installed
  - package digikam-libs-7.0.0-0.3.beta2.fc32.x86_64 requires 
libopencv_dnn.so.4.2()(64bit), but none of the providers can be installed
  - problem with installed package digikam-doc-6.4.0-2.fc31.noarch
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22()
(64bit), but none of the providers can be installed
  - digikam-doc-6.4.0-2.fc31.noarch does not belong to a distupgrade 
repository
  - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
 Problem 28: package ceph-mgr-2:14.2.7-2.fc32.x86_64 requires python3-grpcio, 
but none of the providers can be installed
  - package ceph-2:14.2.7-2.fc32.x86_64 requires ceph-mgr = 2:14.2.7-2.fc32, 
but none of the providers can be installed
  - package python3-grpcio-1.26.0-2.fc32.x86_64 requires grpc(x86-64) = 
1.26.0-2.fc32, but none of the providers can be installed
  - package python3-grpcio-1.20.1-2.fc31.x86_64 requires python3.7dist(six) >= 
1.5.2, but none of the providers can be installed
  - problem with installed package ceph-2:14.2.7-2.fc31.x86_64
  - package grpc-1.26.0-2.fc32.x86_64 requires libprotobuf.so.22()(64bit), but 
none of the providers can be installed
  - python3-six-1.12.0-2.fc31.noarch does not belong to a distupgrade 
repository
  - ceph-2:14.2.7-2.fc31.x86_64 does not belong to a distupgrade repository
  - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
 Problem 29: problem with installed package protobuf-
compiler-3.6.1-6.module_f31+6165+9b01e00c.x86_64
  - package python3-protobuf-3.11.2-2.fc32.noarch conflicts with protobuf-
compiler < 3.11.2 provided by protobuf-
compiler-3.6.1-6.module_f32+6163+c0e6dcb2.x86_64
  - problem with installed package python3-protobuf-3.6.1-5.fc31.noarch
  - python3-protobuf-3.6.1-5.fc31.noarch does not belong to a distupgrade 
repository
  - protobuf-compiler-3.6.1-6.module_f31+6165+9b01e00c.x86_64 does not belong 
to a distupgrade repository
 Problem 30: problem with installed package texlive-
stix-9:svn47652-15.fc31.noarch
  - package texlive-stix-9:svn47652-15.fc31.noarch requires stix-math-fonts, 
but none of the providers can be installed
  - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, 
but none of the providers can be installed
  - package stix-math-fonts-1.1.0-15.fc31.noarch requires stix-fonts = 
1.1.0-15.fc31, but none of the providers can be installed
  - stix-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade 
repository
 Problem 31: R-core-3.6.2-5.fc32.i686 has inferior architecture
  - package R-java-3.6.2-5.fc32.x86_64 requires R-core = 3.6.2-5.fc32, but 
none of the providers can be installed
  - cannot install both R-core-3.6.2-5.fc32.x86_64 and R-
core-3.6.2-1.fc31.x86_64
  - package R-igraph-1.2.4.2-1.fc32.x86_64 requires libRlapack.so()(64bit), 
but none of the providers can be installed
  - problem with installed package R-java-3.6.2-1.fc31.x86_64
  - problem with installed package R-igraph-1.2.4.2-1.fc31.x86_64
  - R-java-3.6.2-1.fc31.x86_64 does not belong to a distupgrade repository
  - R-igraph-1.2.4.2-1.fc31.x86_64 does not belong to a distupgrade repository
 Problem 32: package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()
(64bit), but none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package R-gsl-2.1.6-4.fc32.x86_64 requires libgsl.so.25()(64bit), but none 
of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - problem with installed package sagemath-core-8.8-6.fc31.x86_64
  - package sagemath-core-8.8-7.fc32.x86_64 requires libm4ri-0.0.20140914.so()
(64bit), but none of the providers can be installed
  - problem with installed package R-gsl-2.1.6-2.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - sagemath-core-8.8-6.fc31.x86_64 does not belong to a distupgrade 
repository
  - m4ri-20140914-14.fc31.x86_64 does not belong to a distupgrade repository
  - R-gsl-2.1.6-2.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 33: package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()
(64bit), but none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package asymptote-2.62-2.fc32.x86_64 requires libgsl.so.25()(64bit), but 
none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - problem with installed package coin-or-Clp-1.17.3-3.fc31.x86_64
  - problem with installed package asymptote-2.59-2.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - coin-or-Clp-1.17.3-3.fc31.x86_64 does not belong to a distupgrade 
repository
  - asymptote-2.59-2.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 34: package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libClp.so.1()
(64bit), but none of the providers can be installed
  - package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libOsiClp.so.1()(64bit), 
but none of the providers can be installed
  - package coin-or-Clp-1.17.3-3.fc31.x86_64 requires libCbc.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package calligra-sheets-libs-3.1.0-19.fc32.x86_64 requires libgsl.so.25()
(64bit), but none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - problem with installed package coin-or-Cgl-0.60.2-2.fc31.x86_64
  - problem with installed package calligra-sheets-libs-3.1.0-15.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - coin-or-Cgl-0.60.2-2.fc31.x86_64 does not belong to a distupgrade 
repository
  - calligra-sheets-libs-3.1.0-15.fc31.x86_64 does not belong to a distupgrade 
repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 35: problem with installed package sagemath-8.8-6.fc31.x86_64
  - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the 
providers can be installed
  - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but 
none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package cocoalib-0.99650-2.fc32.x86_64 requires libgsl.so.25()(64bit), but 
none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - package sagemath-core-8.8-6.fc31.x86_64 requires 
libm4rie-0.0.20150908.so()(64bit), but none of the providers can be installed
  - package sagemath-core-8.8-7.fc32.x86_64 requires 
libm4rie-0.0.20150908.so()(64bit), but none of the providers can be installed
  - problem with installed package cocoalib-0.99650-1.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - sagemath-8.8-6.fc31.x86_64 does not belong to a distupgrade repository
  - m4rie-20150908-9.fc31.x86_64 does not belong to a distupgrade repository
  - cocoalib-0.99650-1.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 36: problem with installed package sagemath-sagetex-8.8-6.fc31.x86_64
  - package sagemath-sagetex-9.0-1.fc32.x86_64 requires sagemath(x86-64) = 
9.0-1.fc32, but none of the providers can be installed
  - package sagemath-sagetex-8.8-7.fc32.x86_64 requires sagemath(x86-64) = 
8.8-7.fc32, but none of the providers can be installed
  - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the 
providers can be installed
  - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but 
none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package enblend-4.2-16.fc32.x86_64 requires libgsl.so.25()(64bit), but 
none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - package sagemath-core-8.8-6.fc31.x86_64 requires libntl.so.42()(64bit), 
but none of the providers can be installed
  - package sagemath-core-8.8-7.fc32.x86_64 requires libntl.so.42()(64bit), 
but none of the providers can be installed
  - problem with installed package enblend-4.2-14.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - sagemath-sagetex-8.8-6.fc31.x86_64 does not belong to a distupgrade 
repository
  - ntl-11.4.1-1.fc31.x86_64 does not belong to a distupgrade repository
  - enblend-4.2-14.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 37: problem with installed package sagemath-rubiks-8.8-6.fc31.x86_64
  - package sagemath-rubiks-9.0-1.fc32.x86_64 requires sagemath(x86-64) = 
9.0-1.fc32, but none of the providers can be installed
  - package sagemath-rubiks-8.8-7.fc32.x86_64 requires sagemath(x86-64) = 
8.8-7.fc32, but none of the providers can be installed
  - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the 
providers can be installed
  - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but 
none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package giac-1.5.0.85-1.fc32.x86_64 requires libgsl.so.25()(64bit), but 
none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - package sagemath-core-8.8-6.fc31.x86_64 requires libsymmetrica.so.0()
(64bit), but none of the providers can be installed
  - package sagemath-core-8.8-7.fc32.x86_64 requires libsymmetrica.so.0()
(64bit), but none of the providers can be installed
  - problem with installed package giac-1.5.0.85-1.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - symmetrica-2.0-23.fc31.x86_64 does not belong to a distupgrade repository
  - sagemath-rubiks-8.8-6.fc31.x86_64 does not belong to a distupgrade 
repository
  - giac-1.5.0.85-1.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 38: problem with installed package sagemath-
notebook-8.8-6.fc31.x86_64
  - package sagemath-jupyter-9.0-1.fc32.x86_64 requires sagemath(x86-64) = 
9.0-1.fc32, but none of the providers can be installed
  - package sagemath-notebook-8.8-7.fc32.x86_64 requires sagemath(x86-64) = 
8.8-7.fc32, but none of the providers can be installed
  - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the 
providers can be installed
  - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but 
none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package gsl-devel-2.6-2.fc32.x86_64 requires gsl(x86-64) = 2.6-2.fc32, but 
none of the providers can be installed
  - package gsl-devel-2.6-2.fc32.x86_64 requires libgsl.so.25()(64bit), but 
none of the providers can be installed
  - package sagemath-core-8.8-6.fc31.x86_64 requires libntl.so.42()(64bit), 
but none of the providers can be installed
  - package sagemath-core-8.8-7.fc32.x86_64 requires libntl.so.42()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - problem with installed package gsl-devel-2.5-2.fc31.x86_64
  - package ntl-11.4.1-1.fc31.x86_64 requires libgf2x.so.1()(64bit), but none 
of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - sagemath-notebook-8.8-6.fc31.x86_64 does not belong to a distupgrade 
repository
  - gsl-devel-2.5-2.fc31.x86_64 does not belong to a distupgrade repository
  - gf2x-1.2-6.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 39: problem with installed package sagemath-data-8.8-6.fc31.noarch
  - package sagemath-data-9.0-1.fc32.noarch requires sagemath = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-data-8.8-7.fc32.noarch requires sagemath = 8.8-7.fc32, 
but none of the providers can be installed
  - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the 
providers can be installed
  - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but 
none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - package sagemath-core-8.8-7.fc32.x86_64 requires libntl.so.42()(64bit), 
but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - cannot install both ntl-11.4.3-2.fc32.x86_64 and ntl-11.4.1-1.fc31.x86_64
  - package sagemath-core-8.8-6.fc31.x86_64 requires python(abi) = 3.7, but 
none of the providers can be installed
  - package python3-cvxopt-1.2.4-3.fc32.x86_64 requires libgsl.so.25()(64bit), 
but none of the providers can be installed
  - package Singular-4.1.1p3-12.fc32.x86_64 requires libntl.so.43()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) = 
3.7.6-2.fc31, but none of the providers can be installed
  - problem with installed package python3-cvxopt-1.2.3-2.fc31.x86_64
  - problem with installed package Singular-4.1.1p3-10.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - sagemath-data-8.8-6.fc31.noarch does not belong to a distupgrade 
repository
  - python3-libs-3.7.6-2.fc31.x86_64 does not belong to a distupgrade 
repository
  - python3-cvxopt-1.2.3-2.fc31.x86_64 does not belong to a distupgrade 
repository
  - Singular-4.1.1p3-10.fc31.x86_64 does not belong to a distupgrade 
repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 40: problem with installed package sagemath-data-
polytopes_db-8.8-6.fc31.noarch
  - package sagemath-data-polytopes_db-9.0-1.fc32.noarch requires sagemath-
data = 9.0-1.fc32, but none of the providers can be installed
  - package sagemath-data-polytopes_db-8.8-7.fc32.noarch requires sagemath-
data = 8.8-7.fc32, but none of the providers can be installed
  - package sagemath-data-9.0-1.fc32.noarch requires sagemath = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-data-8.8-7.fc32.noarch requires sagemath = 8.8-7.fc32, 
but none of the providers can be installed
  - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the 
providers can be installed
  - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but 
none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - package sagemath-core-8.8-7.fc32.x86_64 requires libntl.so.42()(64bit), 
but none of the providers can be installed
  - package sagemath-core-8.8-6.fc31.x86_64 requires libmpfr.so.4()(64bit), 
but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - cannot install both ntl-11.4.3-2.fc32.x86_64 and ntl-11.4.1-1.fc31.x86_64
  - cannot install both mpfr-4.0.2-3.fc32.x86_64 and mpfr-3.1.6-5.fc31.x86_64
  - package python3-pygsl-2.3.0-9.fc32.x86_64 requires libgsl.so.25()(64bit), 
but none of the providers can be installed
  - package Singular-libs-4.1.1p3-12.fc32.x86_64 requires libntl.so.43()
(64bit), but none of the providers can be installed
  - package R-Rmpfr-0.8.1-1.fc32.x86_64 requires libmpfr.so.6()(64bit), but 
none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - problem with installed package python3-pygsl-2.3.0-4.fc31.x86_64
  - problem with installed package Singular-libs-4.1.1p3-10.fc31.x86_64
  - problem with installed package R-Rmpfr-0.8.1-1.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - sagemath-data-polytopes_db-8.8-6.fc31.noarch does not belong to a 
distupgrade repository
  - python3-pygsl-2.3.0-4.fc31.x86_64 does not belong to a distupgrade 
repository
  - Singular-libs-4.1.1p3-10.fc31.x86_64 does not belong to a distupgrade 
repository
  - R-Rmpfr-0.8.1-1.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 41: problem with installed package sagemath-data-
graphs-8.8-6.fc31.noarch
  - package sagemath-data-graphs-9.0-1.fc32.noarch requires sagemath-data = 
9.0-1.fc32, but none of the providers can be installed
  - package sagemath-data-graphs-8.8-7.fc32.noarch requires sagemath-data = 
8.8-7.fc32, but none of the providers can be installed
  - package sagemath-data-9.0-1.fc32.noarch requires sagemath = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-data-8.8-7.fc32.noarch requires sagemath = 8.8-7.fc32, 
but none of the providers can be installed
  - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the 
providers can be installed
  - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but 
none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package sagemath-core-8.8-7.fc32.x86_64 requires libm4ri-0.0.20140914.so()
(64bit), but none of the providers can be installed
  - package sagemath-core-8.8-6.fc31.x86_64 requires libmpfr.so.4()(64bit), 
but none of the providers can be installed
  - package calligra-sheets-libs-3.1.0-19.fc32.x86_64 requires libgsl.so.25()
(64bit), but none of the providers can be installed
  - cannot install both m4ri-20200125-2.fc32.x86_64 and 
m4ri-20140914-14.fc31.x86_64
  - cannot install both mpfr-4.0.2-3.fc32.x86_64 and mpfr-3.1.6-5.fc31.x86_64
  - package calligra-sheets-3.1.0-19.fc32.x86_64 requires calligra-sheets-
libs(x86-64) = 3.1.0-19.fc32, but none of the providers can be installed
  - package brial-1.2.7-2.fc32.x86_64 requires libm4ri-0.0.20200125.so()
(64bit), but none of the providers can be installed
  - package arb-2.17.0-2.fc32.x86_64 requires libmpfr.so.6()(64bit), but none 
of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - problem with installed package calligra-sheets-3.1.0-15.fc31.x86_64
  - problem with installed package brial-1.2.5-2.fc31.x86_64
  - problem with installed package arb-2.16.0-3.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - sagemath-data-graphs-8.8-6.fc31.noarch does not belong to a distupgrade 
repository
  - calligra-sheets-3.1.0-15.fc31.x86_64 does not belong to a distupgrade 
repository
  - brial-1.2.5-2.fc31.x86_64 does not belong to a distupgrade repository
  - arb-2.16.0-3.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 42: problem with installed package sagemath-data-
etc-8.8-6.fc31.noarch
  - package sagemath-data-etc-9.0-1.fc32.noarch requires sagemath-data = 
9.0-1.fc32, but none of the providers can be installed
  - package sagemath-data-etc-8.8-7.fc32.noarch requires sagemath-data = 
8.8-7.fc32, but none of the providers can be installed
  - package sagemath-data-9.0-1.fc32.noarch requires sagemath = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-data-8.8-7.fc32.noarch requires sagemath = 8.8-7.fc32, 
but none of the providers can be installed
  - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the 
providers can be installed
  - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but 
none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - package sagemath-core-8.8-7.fc32.x86_64 requires libm4ri-0.0.20140914.so()
(64bit), but none of the providers can be installed
  - package sagemath-core-8.8-6.fc31.x86_64 requires libmpfr.so.4()(64bit), 
but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - cannot install both m4ri-20200125-2.fc32.x86_64 and 
m4ri-20140914-14.fc31.x86_64
  - cannot install both mpfr-4.0.2-3.fc32.x86_64 and mpfr-3.1.6-5.fc31.x86_64
  - package cocoalib-0.99650-2.fc32.x86_64 requires libgsl.so.25()(64bit), but 
none of the providers can be installed
  - package cryptominisat-libs-5.6.8-6.fc32.x86_64 requires 
libm4ri-0.0.20200125.so()(64bit), but none of the providers can be installed
  - package cpp-10.0.1-0.8.fc32.x86_64 requires libmpfr.so.6()(64bit), but 
none of the providers can be installed
  - package cocoalib-devel-0.99650-2.fc32.x86_64 requires cocoalib(x86-64) = 
0.99650-2.fc32, but none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - problem with installed package cryptominisat-libs-5.6.8-2.fc31.x86_64
  - problem with installed package cpp-9.2.1-1.fc31.x86_64
  - problem with installed package cocoalib-devel-0.99650-1.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - sagemath-data-etc-8.8-6.fc31.noarch does not belong to a distupgrade 
repository
  - cryptominisat-libs-5.6.8-2.fc31.x86_64 does not belong to a distupgrade 
repository
  - cpp-9.2.1-1.fc31.x86_64 does not belong to a distupgrade repository
  - cocoalib-devel-0.99650-1.fc31.x86_64 does not belong to a distupgrade 
repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 43: problem with installed package sagemath-data-
elliptic_curves-8.8-6.fc31.noarch
  - package sagemath-data-elliptic_curves-9.0-1.fc32.noarch requires sagemath-
data = 9.0-1.fc32, but none of the providers can be installed
  - package sagemath-data-elliptic_curves-8.8-7.fc32.noarch requires sagemath-
data = 8.8-7.fc32, but none of the providers can be installed
  - package sagemath-data-9.0-1.fc32.noarch requires sagemath = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-data-8.8-7.fc32.noarch requires sagemath = 8.8-7.fc32, 
but none of the providers can be installed
  - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the 
providers can be installed
  - package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()(64bit), but 
none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package giac-1.5.0.85-1.fc32.x86_64 requires libgsl.so.25()(64bit), but 
none of the providers can be installed
  - package pynac-0.7.26-1.fc32.x86_64 requires libgiac.so.0()(64bit), but 
none of the providers can be installed
  - package giac-1.5.0.85-1.fc31.x86_64 requires libntl.so.42()(64bit), but 
none of the providers can be installed
  - package sagemath-core-8.8-6.fc31.x86_64 requires libntl.so.42()(64bit), 
but none of the providers can be installed
  - package sagemath-core-8.8-7.fc32.x86_64 requires libntl.so.42()(64bit), 
but none of the providers can be installed
  - cannot install both ntl-11.4.3-2.fc32.x86_64 and ntl-11.4.1-1.fc31.x86_64
  - package eclib-20190909-3.fc32.x86_64 requires libntl.so.43()(64bit), but 
none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - problem with installed package pynac-0.7.24-4.fc31.x86_64
  - problem with installed package eclib-20190909-1.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - sagemath-data-elliptic_curves-8.8-6.fc31.noarch does not belong to a 
distupgrade repository
  - pynac-0.7.24-4.fc31.x86_64 does not belong to a distupgrade repository
  - eclib-20190909-1.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 44: package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()
(64bit), but none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package sagemath-core-9.0-1.fc32.x86_64 requires libgsl.so.25()(64bit), 
but none of the providers can be installed
  - problem with installed package sagemath-data-
conway_polynomials-8.8-6.fc31.noarch
  - package sagemath-data-conway_polynomials-9.0-1.fc32.noarch requires 
sagemath-data = 9.0-1.fc32, but none of the providers can be installed
  - package sagemath-data-conway_polynomials-8.8-7.fc32.noarch requires 
sagemath-data = 8.8-7.fc32, but none of the providers can be installed
  - package sagemath-data-9.0-1.fc32.noarch requires sagemath = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-data-8.8-7.fc32.noarch requires sagemath = 8.8-7.fc32, 
but none of the providers can be installed
  - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the 
providers can be installed
  - package sagemath-core-8.8-6.fc31.x86_64 requires libntl.so.42()(64bit), 
but none of the providers can be installed
  - package sagemath-core-8.8-7.fc32.x86_64 requires libntl.so.42()(64bit), 
but none of the providers can be installed
  - cannot install both ntl-11.4.3-2.fc32.x86_64 and ntl-11.4.1-1.fc31.x86_64
  - package factory-4.1.1p3-12.fc32.x86_64 requires libntl.so.43()(64bit), but 
none of the providers can be installed
  - problem with installed package factory-4.1.1p3-10.fc31.x86_64
  - sagemath-data-conway_polynomials-8.8-6.fc31.noarch does not belong to a 
distupgrade repository
  - factory-4.1.1p3-10.fc31.x86_64 does not belong to a distupgrade repository
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 45: package sagemath-core-9.0-1.fc32.x86_64 requires libCbc.so.3()
(64bit), but none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), 
but none of the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
(64bit), but none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package sagemath-core-9.0-1.fc32.x86_64 requires libgsl.so.25()(64bit), 
but none of the providers can be installed
  - problem with installed package sagemath-data-
combinatorial_designs-8.8-6.fc31.noarch
  - package sagemath-data-combinatorial_designs-9.0-1.fc32.noarch requires 
sagemath-data = 9.0-1.fc32, but none of the providers can be installed
  - package sagemath-data-combinatorial_designs-8.8-7.fc32.noarch requires 
sagemath-data = 8.8-7.fc32, but none of the providers can be installed
  - package sagemath-data-9.0-1.fc32.noarch requires sagemath = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-data-8.8-7.fc32.noarch requires sagemath = 8.8-7.fc32, 
but none of the providers can be installed
  - package sagemath-9.0-1.fc32.x86_64 requires sagemath-core = 9.0-1.fc32, 
but none of the providers can be installed
  - package sagemath-8.8-7.fc32.x86_64 requires sagemath-core, but none of the 
providers can be installed
  - package sagemath-core-8.8-7.fc32.x86_64 requires libntl.so.42()(64bit), 
but none of the providers can be installed
  - package sagemath-core-8.8-6.fc31.x86_64 requires libmpfr.so.4()(64bit), 
but none of the providers can be installed
  - cannot install both ntl-11.4.3-2.fc32.x86_64 and ntl-11.4.1-1.fc31.x86_64
  - cannot install both mpfr-4.0.2-3.fc32.x86_64 and mpfr-3.1.6-5.fc31.x86_64
  - package flint-2.5.2-31.fc32.x86_64 requires libntl.so.43()(64bit), but 
none of the providers can be installed
  - package flint-2.5.2-31.fc32.x86_64 requires libmpfr.so.6()(64bit), but 
none of the providers can be installed
  - problem with installed package flint-2.5.2-28.fc31.x86_64
  - sagemath-data-combinatorial_designs-8.8-6.fc31.noarch does not belong to a 
distupgrade repository
  - flint-2.5.2-28.fc31.x86_64 does not belong to a distupgrade repository
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but 
none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
compiler), but none of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
library), but none of the providers can be installed
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
(try to add '--allowerasing' to command line to replace conflicting packages 
or '--skip-broken' to skip uninstallable packages)

-- 
José Abílio

[Nathanael D. Noblet]

On Wed, 2020-03-04 at 16:24 +0100, Miroslav Suchý wrote:
>  
>  But very likely you get some dependency problem now. In that case,
>  please report it against the appropriate package. Or
>  against fedora-obsolete-packages if that package should be removed in
>  Fedora 32. Please check existing reports first:
>  https://red.ht/2kuBDPu
>   
[gnat@iridium ~]$ sudo dnf --releasever=32 --
setopt=module_platform_id=platform:f32     --enablerepo=updates-testing 
--enablerepo=updates-testing-modular     distro-sync
Last metadata expiration check: 0:01:26 ago on Wed 04 Mar 2020 09:13:44
AM MST.
Error: 
 Problem: package system-config-keyboard-1.4.0-18.fc31.noarch requires
python2-newt, but none of the providers can be installed
  - python2-newt-0.52.21-2.fc31.x86_64 does not belong to a distupgrade
repository
  - problem with installed package system-config-keyboard-1.4.0-
18.fc31.noarch


If I'm reading that correctly system-config-keyboard is requiring a
python2 package. Is system-config-keyboard supposed to be obsolete?
Seems like probably not but I'm not sure what to do here.

-- 
Nathanael

[stan]

On Wed, 4 Mar 2020 16:24:58 +0100
Miroslav Suchý <msuchy(a)redhat.com&gt; wrote:

>  But very likely you get some dependency problem now. In that case,
>  please report it against the appropriate package. Or against
>  fedora-obsolete-packages if that package should be removed in Fedora
>  32. Please check existing reports first: https://red.ht/2kuBDPu 
I hit 124 issues.  I have attached the dnf output.  That's a lot of
bugzillas to open;  is there a better way?

[Artur Iwicki]

On my second machine:

Problem with installed package mkvtoolnix-gui-41.0.0-1.fc31.x86_64
  - package mkvtoolnix-gui-41.0.0-2.fc32.x86_64 requires libcmark.so.0.28.3()(64bit), but
none of the providers can be installed
  - mkvtoolnix-gui-41.0.0-1.fc31.x86_64 does not belong to a distupgrade repository
  - cmark-lib-0.28.3-6.fc31.x86_64 does not belong to a distupgrade repository

[Alec Leamas]

On 04/03/2020 16:24, Miroslav Suchý wrote:
>  Do you want to make Fedora 32 better? Please spend 1 minute of your
> time and try to run:
>   
Error:
 Problem 1: package VirtualBox-6.1-6.1.2_135662_fedora31-1.x86_64
requires python(abi) = 3.7, but none of the providers can be installed
  - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package
VirtualBox-6.1-6.1.2_135662_fedora31-1.x86_64
 Problem 2: problem with installed package
gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64
  - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires
libmypaint-1.3.so.0()(64bit), but none of the providers can be installed
  - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade
repository
  - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to
a distupgrade repository


Filed gimp bug: https://bugzilla.redhat.com/show_bug.cgi?id=1810173.
VirtualBox left without any actions...

Cheers!
--alec

[Robert-André Mauchin]

On Wednesday, 4 March 2020 17:23:48 CET Artur Iwicki wrote:
>  On my second machine:
>  
>  Problem with installed package mkvtoolnix-gui-41.0.0-1.fc31.x86_64
>    - package mkvtoolnix-gui-41.0.0-2.fc32.x86_64 requires
>  libcmark.so.0.28.3()(64bit), but none of the providers can be installed 
 -
>  mkvtoolnix-gui-41.0.0-1.fc31.x86_64 does not belong to a distupgrade
>  repository - cmark-lib-0.28.3-6.fc31.x86_64 does not belong to a
>  distupgrade repository 
Got only this one. I filled a bug
https://bugzilla.redhat.com/show_bug.cgi?id=1810191

CC Rathann

❯ LANG=C sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32
--enablerepo=updates-testing --enablerepo=updates-testing-modular distro-sync
Copr repo for neomutt owned by flatcap                        454  B/s | 341  B     00:00 
  
Errors during downloading metadata for repository 'flatcap-neomutt':
  - Status code: 404 for
https://copr-be.cloud.fedoraproject.org/results/flatcap/neomutt/fedora-32...
(IP: 34.227.76.72)
Error: Failed to download metadata for repo 'flatcap-neomutt': Cannot download
repomd.xml: Cannot download repodata/repomd.xml: All mirrors were tried
keybase                                                        19 kB/s | 3.3 kB     00:00 
  
Ignoring repositories: flatcap-neomutt
Modular dependency problems:

 Problem 1: conflicting requests
  - nothing provides module(platform:f31) needed by module
bat:latest:3120190813194409:22d7e2a5-0.x86_64
 Problem 2: conflicting requests
  - nothing provides module(platform:f31) needed by module
dutree:rolling:3120190926112243:22d7e2a5-0.x86_64
 Problem 3: conflicting requests
  - nothing provides module(platform:f31) needed by module
exa:latest:3120190813195051:22d7e2a5-0.x86_64
 Problem 4: conflicting requests
  - nothing provides module(platform:f31) needed by module
ffsend:latest:3120190812145625:22d7e2a5-0.x86_64
 Problem 5: conflicting requests
  - nothing provides module(platform:f31) needed by module
fish:3:3120190219150858:6045e57d-0.x86_64
 Problem 6: conflicting requests
  - nothing provides module(platform:f31) needed by module
libgit2:0.27:3120190407181414:f636be4b-0.x86_64
 Problem 7: conflicting requests
  - nothing provides module(platform:f31) needed by module
lsd:rolling:3120190803124134:22d7e2a5-0.x86_64
 Problem 8: conflicting requests
  - nothing provides module(platform:f31) needed by module
meson:latest:3120191009081836:dc56099c-0.x86_64
 Problem 9: conflicting requests
  - nothing provides module(platform:f31) needed by module
ninja:latest:3120190304180949:f636be4b-0.x86_64
 Problem 10: conflicting requests
  - nothing provides module(platform:f31) needed by module
ripgrep:latest:3120190803131619:22d7e2a5-0.x86_64
 Problem 11: conflicting requests
  - nothing provides module(platform:f31) needed by module
skim:rolling:3120190921123929:22d7e2a5-0.x86_64
Error: 
 Problem 1: problem with installed package
rubygem-asciidoctor-pdf-1.5.0-0.12.beta.6.fc31.noarch
  - rubygem-asciidoctor-pdf-1.5.0-0.12.beta.6.fc31.noarch does not belong to a distupgrade
repository
  - nothing provides (rubygem(treetop) >= 1.5.0 with rubygem(treetop) < 1.6) needed
by rubygem-asciidoctor-pdf-1.5.0-0.11.beta.6.fc32.noarch
 Problem 2: problem with installed package docker-compose-1.25.4-1.fc31.noarch
  - docker-compose-1.25.4-1.fc31.noarch does not belong to a distupgrade repository
  - nothing provides python3.8dist(dockerpty) >= 0.4.1 needed by
docker-compose-1.24.1-3.fc32.noarch
 Problem 3: package mysql-connector-python-8.0.19-1.fc31.x86_64 requires
python2.7dist(protobuf) = 3.6.1, but none of the providers can be installed
  - python2-protobuf-3.6.1-5.fc31.noarch does not belong to a distupgrade repository
  - problem with installed package mysql-connector-python-8.0.19-1.fc31.x86_64
 Problem 4: problem with installed package mkvtoolnix-gui-41.0.0-1.fc31.x86_64
  - package mkvtoolnix-gui-41.0.0-2.fc32.x86_64 requires libcmark.so.0.28.3()(64bit), but
none of the providers can be installed
  - mkvtoolnix-gui-41.0.0-1.fc31.x86_64 does not belong to a distupgrade repository
  - cmark-lib-0.28.3-6.fc31.x86_64 does not belong to a distupgrade repository
 Problem 5: package texlive-collection-fontsextra-9:svn51763-18.fc32.noarch requires
texlive-stix, but none of the providers can be installed
  - problem with installed package
texlive-collection-fontsextra-9:svn51763-15.fc31.noarch
  - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of
the providers can be installed
  - texlive-stix-9:svn47652-15.fc31.noarch does not belong to a distupgrade repository
  - texlive-collection-fontsextra-9:svn51763-15.fc31.noarch does not belong to a
distupgrade repository
  - stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository
 Problem 6: problem with installed package
gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64
  - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires
libmypaint-1.3.so.0()(64bit), but none of the providers can be installed
  - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository
  - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade
repository
 Problem 7: problem with installed package texlive-stix-9:svn47652-15.fc31.noarch
  - package texlive-stix-9:svn47652-15.fc31.noarch requires stix-math-fonts, but none of
the providers can be installed
  - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of
the providers can be installed
  - package stix-math-fonts-1.1.0-15.fc31.noarch requires stix-fonts = 1.1.0-15.fc31, but
none of the providers can be installed
  - stix-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository
(try to add '--skip-broken' to skip uninstallable packages)

[Marcin Juszkiewicz]

W dniu 04.03.2020 o 16:33, Marcin Juszkiewicz pisze:
>  W dniu 04.03.2020 o 16:24, Miroslav Suchý pisze:
> > Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to
> run:
> >
> >   # Run this only if you use default Fedora modules
> >   # next time you run any DNF command default modules will be enabled again
> >   sudo dnf module reset '*'
> >
> >   sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
> >     --enablerepo=updates-testing --enablerepo=updates-testing-modular \
> >     distro-sync
> >
>  
>   Problem: package moodbar-0.1.2-19.fc29.x86_64 requires libgstbase-0.10.so.0()(64bit),
> but none of the providers can be installed
>    - package moodbar-0.1.2-19.fc29.x86_64 requires libgstreamer-0.10.so.0()(64bit), but
> none of the providers can be installed
>    - gstreamer-0.10.36-24.fc31.x86_64 does not belong to a distupgrade repository
>    - problem with installed package moodbar-0.1.2-19.fc29.x86_64
>  
>  Removed moodbar and next try was fine. 
Looked closer - there are six downgrades:

Instalowanie poprzedniej wersji:
 firefox                   x86_64 72.0.2-3.fc32        fedora           98 M
 java-1.8.0-openjdk-headless
                           x86_64 1:1.8.0.242.b06-0.0.ea.fc32
                                                       fedora           32 M
 kf5-kirigami2             x86_64 5.67.0-1.fc32        fedora          248 k
 libarchive                x86_64 3.4.0-2.fc32         fedora          388 k
 libarchive-devel          x86_64 3.4.0-2.fc32         fedora          124 k
 qqc2-desktop-style        x86_64 5.67.0-1.fc32        fedora          100 k

[Ian McInerney]

What is supposed to happen with any packages that depend on python2 that
are currently installed on the system? I know that the actual packages have
been retired since python2 is retired now, but currently DNF is blocking
the upgrade of the system (not just marking them for removal).

Here are the three errors I get:

Problem 2: package exaile-4.0.0-3.fc31.noarch requires python2-dbus, but
none of the providers can be installed
  - python2-dbus-1.2.8-6.fc31.x86_64 does not belong to a distupgrade
repository
  - problem with installed package exaile-4.0.0-3.fc31.noarch
 Problem 3: package system-config-keyboard-1.4.0-18.fc31.noarch requires
python2-newt, but none of the providers can be installed
  - python2-newt-0.52.21-2.fc31.x86_64 does not belong to a distupgrade
repository
  - problem with installed package
system-config-keyboard-1.4.0-18.fc31.noarch
Problem 5: package wxPython-devel-3.0.2.0-26.fc31.noarch requires
python2-wxpython = 3.0.2.0-26.fc31, but none of the providers can be
installed
  - python2-wxpython-3.0.2.0-26.fc31.x86_64 does not belong to a
distupgrade repository
  - problem with installed package wxPython-devel-3.0.2.0-26.fc31.noarch

-Ian

On Wed, Mar 4, 2020 at 3:26 PM Miroslav Suchý <msuchy(a)redhat.com&gt; wrote:

>  Do you want to make Fedora 32 better? Please spend 1 minute of your
> time
>  and try to run:
>
>    # Run this only if you use default Fedora modules
>    # next time you run any DNF command default modules will be enabled again
>    sudo dnf module reset '*'
>
>    sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
>      --enablerepo=updates-testing --enablerepo=updates-testing-modular \
>      distro-sync
>
>  This command does not replace `dnf system-upgrade`, but it will reveal
>  potential problems. You may also run `dnf
>  upgrade` before running this command.
>
>
>  If you get this prompt:
>
>    ...
>    Total download size: XXX M
>    Is this ok [y/N]:
>
>  you can answer N and nothing happens, no need to test the actual upgrade.
>
>  But very likely you get some dependency problem now. In that case, please
>  report it against the appropriate package. Or
>  against fedora-obsolete-packages if that package should be removed in
>  Fedora 32. Please check existing reports first:
>  https://red.ht/2kuBDPu
>
>  Thank you
>
>  --
>  Miroslav Suchy, RHCA
>  Red Hat, Associate Manager ABRT/Copr, #brno, #fedora-buildsys
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>

[chedi toueiti]

Problem: conflicting requests
  - nothing provides module(platform:f31) needed by module
bat:latest:3120190813194409:22d7e2a5-0.x86_64
Error:
 Problem 1: package gnome-python2-desktop-2.32.0-38.fc31.x86_64 requires
gnome-python2-canvas >= 2.10.0, but none of the providers can be installed
  - gnome-python2-canvas-2.28.1-30.fc31.x86_64 does not belong to a
distupgrade repository
  - problem with installed package
gnome-python2-desktop-2.32.0-38.fc31.x86_64
 Problem 2: package pgadmin4-python3-flask-compress-1.4.0-1.f31.noarch
requires python(abi) = 3.7, but none of the providers can be installed
  - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package
pgadmin4-python3-flask-compress-1.4.0-1.f31.noarch
 Problem 3: package python3-3.7.6-2.fc31.x86_64 requires
python3-libs(x86-64) = 3.7.6-2.fc31, but none of the providers can be
installed
  - package pgadmin4-python3-flask-htmlmin-1.5.0-1.f31.noarch requires
python(abi) = 3.7, but none of the providers can be installed
  - python3-libs-3.7.6-2.fc31.x86_64 does not belong to a distupgrade
repository
  - problem with installed package
pgadmin4-python3-flask-htmlmin-1.5.0-1.f31.noarch
 Problem 4: problem with installed package timescaledb-1.5.1-1.fc31.x86_64
  - package timescaledb-1.5.1-2.fc32.x86_64 requires
postgresql-server(:MODULE_COMPAT_11), but none of the providers can be
installed
  - timescaledb-1.5.1-1.fc31.x86_64 does not belong to a distupgrade
repository
  - postgresql-server-11.7-1.fc31.x86_64 does not belong to a distupgrade
repository
  - package postgresql-server-11.7-1.module_f32+8176+957a8c69.x86_64 is
filtered out by modular filtering
 Problem 5: problem with installed package python3-devel-3.7.6-2.fc31.x86_64
  - package python3-devel-3.8.2-2.fc32.x86_64 conflicts with python3 <
3.8.2-2.fc32 provided by python3-3.7.6-2.fc31.x86_64
  - package python3-devel-3.8.2~rc2-1.fc32.x86_64 conflicts with python3 <
3.8.2~rc2-1.fc32 provided by python3-3.7.6-2.fc31.x86_64
  - package pgadmin4-python3-flask-migrate-2.4.0-1.f31.noarch requires
python(abi) = 3.7, but none of the providers can be installed
  - python3-devel-3.7.6-2.fc31.x86_64 does not belong to a distupgrade
repository
  - problem with installed package
pgadmin4-python3-flask-migrate-2.4.0-1.f31.noarch
 Problem 6: problem with installed package python38-3.8.1-1.fc31.x86_64
  - cannot install both python3-3.8.2-2.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - package pgadmin4-python3-psutil-5.5.1-1.f31.x86_64 requires python(abi)
= 3.7, but none of the providers can be installed
  - python38-3.8.1-1.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package
pgadmin4-python3-psutil-5.5.1-1.f31.x86_64
 Problem 7: package python3-dasbus-0.2-2.fc32.noarch requires python(abi) =
3.8, but none of the providers can be installed
  - python3-3.8.2-2.fc32.i686 has inferior architecture
  - python3-3.8.2~rc2-1.fc32.i686 has inferior architecture
  - package anaconda-core-32.24.2-1.fc32.x86_64 requires python3-dasbus >=
0.2, but none of the providers can be installed
  - cannot install both python3-3.8.2-2.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - problem with installed package anaconda-core-31.22.6-2.fc31.x86_64
  - package pgadmin4-python3-six-1.12.0-3.f31.noarch requires python(abi) =
3.7, but none of the providers can be installed
  - anaconda-core-31.22.6-2.fc31.x86_64 does not belong to a distupgrade
repository
  - problem with installed package pgadmin4-python3-six-1.12.0-3.f31.noarch
 Problem 8: package python3-dasbus-0.2-2.fc32.noarch requires python(abi) =
3.8, but none of the providers can be installed
  - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by
python38-3.8.1-1.fc31.x86_64
  - package python3-3.8.2~rc2-1.fc32.i686 requires python3-libs(x86-32) =
3.8.2~rc2-1.fc32, but none of the providers can be installed
  - package boost-python3-1.69.0-14.fc32.x86_64 requires
libpython3.8.so.1.0()(64bit), but none of the providers can be installed
  - python3-libs-3.8.2~rc2-1.fc32.i686 has inferior architecture
  - package anaconda-core-32.24.2-1.fc32.x86_64 requires python3-dasbus >=
0.2, but none of the providers can be installed
  - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - package anaconda-32.24.2-1.fc32.x86_64 requires anaconda-core =
32.24.2-1.fc32, but none of the providers can be installed
  - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) =
3.7.6-2.fc31, but none of the providers can be installed
  - cannot install both python3-3.8.2-2.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - problem with installed package boost-python3-1.69.0-9.fc31.x86_64
  - problem with installed package anaconda-31.22.6-2.fc31.x86_64
  - package pgadmin4-python3-sshtunnel-0.1.4-1.f31.noarch requires
python(abi) = 3.7, but none of the providers can be installed
  - boost-python3-1.69.0-9.fc31.x86_64 does not belong to a distupgrade
repository
  - anaconda-31.22.6-2.fc31.x86_64 does not belong to a distupgrade
repository
  - problem with installed package
pgadmin4-python3-sshtunnel-0.1.4-1.f31.noarch
 Problem 9: package python3-dasbus-0.2-2.fc32.noarch requires python(abi) =
3.8, but none of the providers can be installed
  - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by
python38-3.8.1-1.fc31.x86_64
  - package python3-3.8.2~rc2-1.fc32.i686 obsoletes python38 provided by
python38-3.8.1-1.fc31.x86_64
  - package gdb-headless-9.1-3.fc32.x86_64 requires
libpython3.8.so.1.0()(64bit), but none of the providers can be installed
  - package anaconda-core-32.24.2-1.fc32.x86_64 requires python3-dasbus >=
0.2, but none of the providers can be installed
  - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - package anaconda-gui-32.24.2-1.fc32.x86_64 requires anaconda-core =
32.24.2-1.fc32, but none of the providers can be installed
  - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) =
3.7.6-2.fc31, but none of the providers can be installed
  - cannot install both python3-3.8.2-2.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - problem with installed package
gdb-headless-8.3.50.20190824-30.fc31.x86_64
  - problem with installed package anaconda-gui-31.22.6-2.fc31.x86_64
  - package pgadmin4-python3-werkzeug-0.15.4-1.f31.noarch requires
python(abi) = 3.7, but none of the providers can be installed
  - gdb-headless-8.3.50.20190824-30.fc31.x86_64 does not belong to a
distupgrade repository
  - anaconda-gui-31.22.6-2.fc31.x86_64 does not belong to a distupgrade
repository
  - problem with installed package
pgadmin4-python3-werkzeug-0.15.4-1.f31.noarch
 Problem 10: package python3-dasbus-0.2-2.fc32.noarch requires python(abi)
= 3.8, but none of the providers can be installed
  - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by
python38-3.8.1-1.fc31.x86_64
  - package python3-3.8.2~rc2-1.fc32.i686 obsoletes python38 provided by
python38-3.8.1-1.fc31.x86_64
  - package gdb-headless-9.1-3.fc32.x86_64 requires
libpython3.8.so.1.0()(64bit), but none of the providers can be installed
  - package anaconda-core-32.24.2-1.fc32.x86_64 requires python3-dasbus >=
0.2, but none of the providers can be installed
  - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - package anaconda-tui-32.24.2-1.fc32.x86_64 requires anaconda-core =
32.24.2-1.fc32, but none of the providers can be installed
  - package abrt-addon-ccpp-2.14.0-2.fc32.x86_64 requires gdb-headless, but
none of the providers can be installed
  - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) =
3.7.6-2.fc31, but none of the providers can be installed
  - cannot install both python3-3.8.2-2.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - package gdb-headless-8.3.50.20190824-30.fc31.x86_64 requires
libmpfr.so.4()(64bit), but none of the providers can be installed
  - problem with installed package anaconda-tui-31.22.6-2.fc31.x86_64
  - problem with installed package abrt-addon-ccpp-2.14.0-1.fc31.x86_64
  - package pgadmin4-pytz-2018.9-1.f31.noarch requires python(abi) = 3.7,
but none of the providers can be installed
  - mpfr-3.1.6-5.fc31.x86_64 does not belong to a distupgrade repository
  - anaconda-tui-31.22.6-2.fc31.x86_64 does not belong to a distupgrade
repository
  - abrt-addon-ccpp-2.14.0-1.fc31.x86_64 does not belong to a distupgrade
repository
  - problem with installed package pgadmin4-pytz-2018.9-1.f31.noarch
 Problem 11: package python3-dasbus-0.2-2.fc32.noarch requires python(abi)
= 3.8, but none of the providers can be installed
  - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by
python38-3.8.1-1.fc31.x86_64
  - package python3-3.8.2~rc2-1.fc32.i686 obsoletes python38 provided by
python38-3.8.1-1.fc31.x86_64
  - package anaconda-core-32.24.2-1.fc32.x86_64 requires python3-dasbus >=
0.2, but none of the providers can be installed
  - package gdb-headless-9.1-3.fc32.x86_64 requires
libpython3.8.so.1.0()(64bit), but none of the providers can be installed
  - package anaconda-gui-32.24.2-1.fc32.x86_64 requires anaconda-core =
32.24.2-1.fc32, but none of the providers can be installed
  - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - package gdb-9.1-3.fc32.x86_64 requires gdb-headless(x86-64) =
9.1-3.fc32, but none of the providers can be installed
  - package anaconda-live-32.24.2-1.fc32.x86_64 requires anaconda-gui =
32.24.2-1.fc32, but none of the providers can be installed
  - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) =
3.7.6-2.fc31, but none of the providers can be installed
  - cannot install both python3-3.8.2-2.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - problem with installed package gdb-8.3.50.20190824-30.fc31.x86_64
  - problem with installed package anaconda-live-31.22.6-2.fc31.x86_64
  - package pgadmin4-web-4.18-1.f31.noarch requires python(abi) = 3.7, but
none of the providers can be installed
  - gdb-8.3.50.20190824-30.fc31.x86_64 does not belong to a distupgrade
repository
  - anaconda-live-31.22.6-2.fc31.x86_64 does not belong to a distupgrade
repository
  - problem with installed package pgadmin4-web-4.18-1.f31.noarch
 Problem 12: package python3-dasbus-0.2-2.fc32.noarch requires python(abi)
= 3.8, but none of the providers can be installed
  - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by
python38-3.8.1-1.fc31.x86_64
  - package python3-3.8.2~rc2-1.fc32.i686 obsoletes python38 provided by
python38-3.8.1-1.fc31.x86_64
  - package anaconda-core-32.24.2-1.fc32.x86_64 requires python3-dasbus >=
0.2, but none of the providers can be installed
  - package kitty-0.15.0-1.fc32.x86_64 requires
libpython3.8.so.1.0()(64bit), but none of the providers can be installed
  - package anaconda-32.24.2-1.fc32.x86_64 requires anaconda-core =
32.24.2-1.fc32, but none of the providers can be installed
  - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - package kdump-anaconda-addon-005-8.20200220git80aab11.fc32.noarch
requires anaconda >= 21.33, but none of the providers can be installed
  - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) =
3.7.6-2.fc31, but none of the providers can be installed
  - cannot install both python3-3.8.2-2.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - problem with installed package kitty-0.16.0-1.fc31.x86_64
  - problem with installed package
kdump-anaconda-addon-005-5.20190103gitb16ea2c.fc31.noarch
  - package anaconda-31.22.6-2.fc31.x86_64 requires
anaconda-install-env-deps = 31.22.6-2.fc31, but none of the providers can
be installed
  - package python3-gilt-1.2.1-1.fc31.noarch requires python(abi) = 3.7,
but none of the providers can be installed
  - kitty-0.16.0-1.fc31.x86_64 does not belong to a distupgrade repository
  - kdump-anaconda-addon-005-5.20190103gitb16ea2c.fc31.noarch does not
belong to a distupgrade repository
  - anaconda-install-env-deps-31.22.6-2.fc31.x86_64 does not belong to a
distupgrade repository
  - problem with installed package python3-gilt-1.2.1-1.fc31.noarch
 Problem 13: package python3-configobj-5.0.6-20.fc32.noarch requires
python(abi) = 3.8, but none of the providers can be installed
  - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by
python38-3.8.1-1.fc31.x86_64
  - package python3-3.8.2~rc2-1.fc32.i686 obsoletes python38 provided by
python38-3.8.1-1.fc31.x86_64
  - package libpeas-loader-python3-1.25.3-2.fc32.x86_64 requires
libpython3.8.so.1.0()(64bit), but none of the providers can be installed
  - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) =
3.7.6-2.fc31, but none of the providers can be installed
  - cannot install both python3-3.8.2-2.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - package terminator-1.91-15.fc32.noarch requires python3-configobj, but
none of the providers can be installed
  - package pgadmin4-python3-flask-compress-1.4.0-1.f31.noarch requires
python(abi) = 3.7, but none of the providers can be installed
  - problem with installed package terminator-1.91-10.fc31.noarch
  - problem with installed package
libpeas-loader-python3-1.24.1-1.fc31.x86_64
  - package pgadmin4-4.18-1.f31.x86_64 requires
pgadmin4-python3-flask-compress >= 1.4.0, but none of the providers can be
installed
  - terminator-1.91-10.fc31.noarch does not belong to a distupgrade
repository
  - libpeas-loader-python3-1.24.1-1.fc31.x86_64 does not belong to a
distupgrade repository
  - problem with installed package pgadmin4-4.18-1.f31.x86_64
 Problem 14: package python3-nftables-1:0.9.3-2.fc32.x86_64 requires
python(abi) = 3.8, but none of the providers can be installed
  - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by
python38-3.8.1-1.fc31.x86_64
  - package python3-3.8.2~rc2-1.fc32.i686 obsoletes python38 provided by
python38-3.8.1-1.fc31.x86_64
  - package libpeas-loader-python3-1.25.3-2.fc32.x86_64 requires
libpython3.8.so.1.0()(64bit), but none of the providers can be installed
  - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) =
3.7.6-2.fc31, but none of the providers can be installed
  - cannot install both python3-3.8.2-2.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - package python3-firewall-0.8.1-1.fc32.noarch requires python3-nftables,
but none of the providers can be installed
  - package gedit-2:3.35.90-2.fc32.x86_64 requires
libpeas-loader-python3(x86-64), but none of the providers can be installed
  - package pgadmin4-web-4.18-1.f31.noarch requires python(abi) = 3.7, but
none of the providers can be installed
  - problem with installed package python3-firewall-0.7.3-1.fc31.noarch
  - package libpeas-loader-python3-1.24.1-1.fc31.x86_64 requires
libpeas(x86-64) = 1.24.1-1.fc31, but none of the providers can be installed
  - problem with installed package gedit-2:3.34.1-1.fc31.x86_64
  - package pgadmin4-desktop-common-4.18-1.f31.x86_64 requires
pgadmin4-web, but none of the providers can be installed
  - python3-firewall-0.7.3-1.fc31.noarch does not belong to a distupgrade
repository
  - libpeas-1.24.1-1.fc31.x86_64 does not belong to a distupgrade repository
  - gedit-2:3.34.1-1.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package pgadmin4-desktop-common-4.18-1.f31.x86_64
 Problem 15: package python3-nftables-1:0.9.3-2.fc32.x86_64 requires
python(abi) = 3.8, but none of the providers can be installed
  - package python3-3.8.2-2.fc32.i686 obsoletes python38 provided by
python38-3.8.1-1.fc31.x86_64
  - package python3-3.8.2~rc2-1.fc32.i686 obsoletes python38 provided by
python38-3.8.1-1.fc31.x86_64
  - package postgresql-contrib-12.2-1.fc32.x86_64 requires
libpython3.8.so.1.0()(64bit), but none of the providers can be installed
  - cannot install both python3-libs-3.8.2-2.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - cannot install both python3-libs-3.8.2~rc2-1.fc32.x86_64 and
python3-libs-3.7.6-2.fc31.x86_64
  - package python3-firewall-0.8.1-1.fc32.noarch requires python3-nftables,
but none of the providers can be installed
  - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) =
3.7.6-2.fc31, but none of the providers can be installed
  - cannot install both python3-3.8.2-2.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - cannot install both python3-3.8.2~rc2-1.fc32.x86_64 and
python3-3.7.6-2.fc31.x86_64
  - package firewalld-0.8.1-1.fc32.noarch requires python3-firewall =
0.8.1-1.fc32, but none of the providers can be installed
  - package pgadmin4-web-4.18-1.f31.noarch requires python(abi) = 3.7, but
none of the providers can be installed
  - problem with installed package postgresql-contrib-11.7-1.fc31.x86_64
  - problem with installed package firewalld-0.7.3-1.fc31.noarch
  - package pgadmin4-desktop-gnome-4.18-1.f31.noarch requires pgadmin4-web,
but none of the providers can be installed
  - postgresql-contrib-11.7-1.fc31.x86_64 does not belong to a distupgrade
repository
  - firewalld-0.7.3-1.fc31.noarch does not belong to a distupgrade
repository
  - problem with installed package pgadmin4-desktop-gnome-4.18-1.f31.noarch

On Wed, Mar 4, 2020 at 7:15 PM Marcin Juszkiewicz <mjuszkiewicz(a)redhat.com&gt;
wrote:

>  W dniu 04.03.2020 o 16:33, Marcin Juszkiewicz pisze:
>  > W dniu 04.03.2020 o 16:24, Miroslav Suchý pisze:
>  >> Do you want to make Fedora 32 better? Please spend 1 minute of your
>  time and try to run:
>  >>
>  >>   # Run this only if you use default Fedora modules
>  >>   # next time you run any DNF command default modules will be enabled
>  again
>  >>   sudo dnf module reset '*'
>  >>
>  >>   sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
>  >>     --enablerepo=updates-testing --enablerepo=updates-testing-modular \
>  >>     distro-sync
>  >>
>  >
>  >  Problem: package moodbar-0.1.2-19.fc29.x86_64 requires
>  libgstbase-0.10.so.0()(64bit), but none of the providers can be installed
>  >   - package moodbar-0.1.2-19.fc29.x86_64 requires
>  libgstreamer-0.10.so.0()(64bit), but none of the providers can be installed
>  >   - gstreamer-0.10.36-24.fc31.x86_64 does not belong to a distupgrade
>  repository
>  >   - problem with installed package moodbar-0.1.2-19.fc29.x86_64
>  >
>  > Removed moodbar and next try was fine.
>
>  Looked closer - there are six downgrades:
>
>  Instalowanie poprzedniej wersji:
>   firefox                   x86_64 72.0.2-3.fc32        fedora           98
>  M
>   java-1.8.0-openjdk-headless
>                             x86_64 1:1.8.0.242.b06-0.0.ea.fc32
>                                                         fedora           32
>  M
>   kf5-kirigami2             x86_64 5.67.0-1.fc32        fedora          248
>  k
>   libarchive                x86_64 3.4.0-2.fc32         fedora          388
>  k
>   libarchive-devel          x86_64 3.4.0-2.fc32         fedora          124
>  k
>   qqc2-desktop-style        x86_64 5.67.0-1.fc32        fedora          100
>  k
>
>
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>  

-- 
*Chedi Toueiti*

* Due to the constant fluctuation in customer personalities, we cannot be
responsible for the mental stability of any one member of our staff.

** My opinions may have changed, but not the fact that I am right.

*** I always try to go the extra mile at work, but my boss always finds me
and brings me back.

[Solomon Peachy]

I just tried six different systems:

***** Two servers did the F31-F32 test upgrade cleanly.  
***** A third server with F30 went kaboom quite spectactularly, 
      mostly due to python2 stuffs:

Modular dependency problem:

 Problem: conflicting requests
  - nothing provides module(platform:f30) needed by module
fish:3:3020190301191132:602da195-0.x86_64
Error: 
 Problem 1: package cvs2git-2.3.0-0.11.r5319svn.fc23.noarch requires cvs2commons, but none
of the providers can be installed
  - cvs2commons-2.3.0-0.11.r5319svn.fc23.noarch does not belong to a distupgrade
repository
  - problem with installed package cvs2git-2.3.0-0.11.r5319svn.fc23.noarch
 Problem 2: package geome-2.0-12.fc29.noarch requires python2-dbus, but none of the
providers can be installed
  - python2-dbus-1.2.8-5.fc30.x86_64 does not belong to a distupgrade repository
  - problem with installed package geome-2.0-12.fc29.noarch
 Problem 3: package mailgraph-1.14-34.fc29.noarch requires perl(:MODULE_COMPAT_5.28.0),
but none of the providers can be installed
  - perl-libs-4:5.28.2-441.fc30.x86_64 does not belong to a distupgrade repository
  - problem with installed package mailgraph-1.14-34.fc29.noarch
  - package perl-libs-4:5.28.2-442.module_f32+8059+8a5cccba.x86_64 is filtered out by
modular filtering
  - package perl-libs-4:5.28.2-442.module_f32+8111+66b92dcd.x86_64 is filtered out by
modular filtering
 Problem 4: package python2-PyDrive-1.3.1-7.fc30.noarch requires python2-oauth2client
>= 4.0.0, but none of the providers can be installed
  - package python2-PyDrive-1.3.1-7.fc30.noarch requires python2.7dist(oauth2client) >=
4.0.0, but none of the providers can be installed
  - python2-oauth2client-4.1.3-2.fc30.noarch does not belong to a distupgrade repository
  - problem with installed package python2-PyDrive-1.3.1-7.fc30.noarch
 Problem 5: package python2-carddav-0.7.0-12.fc30.noarch requires python2-dateutil, but
none of the providers can be installed
  - python2-dateutil-1:2.8.0-1.fc30.noarch does not belong to a distupgrade repository
  - problem with installed package python2-carddav-0.7.0-12.fc30.noarch
 Problem 6: package python2-cliapp-1.20180121-1.fc30.noarch requires python2-pyyaml, but
none of the providers can be installed
  - python2-pyyaml-5.1-1.fc30.x86_64 does not belong to a distupgrade repository
  - problem with installed package python2-cliapp-1.20180121-1.fc30.noarch
 Problem 7: package python2-cracklib-2.9.6-19.fc30.x86_64 requires cracklib =
2.9.6-19.fc30, but none of the providers can be installed
  - cracklib-2.9.6-19.fc30.x86_64 does not belong to a distupgrade repository
  - problem with installed package python2-cracklib-2.9.6-19.fc30.x86_64
 Problem 8: package python2-deltarpm-3.6-29.fc30.x86_64 requires deltarpm(x86-64) =
3.6-29.fc30, but none of the providers can be installed
  - deltarpm-3.6-29.fc30.x86_64 does not belong to a distupgrade repository
  - problem with installed package python2-deltarpm-3.6-29.fc30.x86_64
 Problem 9: package python2-dropbox-9.4.0-1.fc30.noarch requires python2-requests, but
none of the providers can be installed
  - package python2-dropbox-9.4.0-1.fc30.noarch requires python2.7dist(requests) >=
2.16.2, but none of the providers can be installed
  - python2-requests-2.22.0-2.fc30.noarch does not belong to a distupgrade repository
  - problem with installed package python2-dropbox-9.4.0-1.fc30.noarch
 Problem 10: package python2-gamin-0.1.10-33.fc30.x86_64 requires gamin(x86-64) =
0.1.10-33.fc30, but none of the providers can be installed
  - gamin-0.1.10-33.fc30.x86_64 does not belong to a distupgrade repository
  - problem with installed package python2-gamin-0.1.10-33.fc30.x86_64
 Problem 11: package python2-gitdb-2.0.3-5.fc30.noarch requires python2-smmap >= 2.0.0,
but none of the providers can be installed
  - package python2-gitdb-2.0.3-5.fc30.noarch requires python2.7dist(smmap2) >= 2.0.0,
but none of the providers can be installed
  - python2-smmap-2.0.3-5.fc30.noarch does not belong to a distupgrade repository
  - problem with installed package python2-gitdb-2.0.3-5.fc30.noarch
 Problem 12: package python2-google-api-client-1:1.6.7-6.fc30.noarch requires
python2-uritemplate >= 3.0.0, but none of the providers can be installed
  - package python2-google-api-client-1:1.6.7-6.fc30.noarch requires
python2.7dist(uritemplate) >= 3.0.0, but none of the providers can be installed
  - package python2-google-api-client-1:1.6.7-6.fc30.noarch requires
python2.7dist(uritemplate) < 4dev, but none of the providers can be installed
  - python2-uritemplate-3.0.0-5.fc30.noarch does not belong to a distupgrade repository
  - problem with installed package python2-google-api-client-1:1.6.7-6.fc30.noarch
 Problem 13: package python2-gpg-1.12.0-1.fc30.x86_64 requires gpgme(x86-64) =
1.12.0-1.fc30, but none of the providers can be installed
  - gpgme-1.12.0-1.fc30.x86_64 does not belong to a distupgrade repository
  - problem with installed package python2-gpg-1.12.0-1.fc30.x86_64
 Problem 14: package python2-larch-1.20151025-9.fc28.noarch requires python2-tracing, but
none of the providers can be installed
  - python2-tracing-0.9-8.fc30.noarch does not belong to a distupgrade repository
  - problem with installed package python2-larch-1.20151025-9.fc28.noarch
 Problem 15: package python2-libselinux-2.9-3.1.fc30.x86_64 requires libselinux(x86-64) =
2.9-3.1.fc30, but none of the providers can be installed
  - libselinux-2.9-3.1.fc30.x86_64 does not belong to a distupgrade repository
  - problem with installed package python2-libselinux-2.9-3.1.fc30.x86_64
 Problem 16: package python2-libsemanage-2.9-1.fc30.x86_64 requires libsemanage(x86-64) =
2.9-1.fc30, but none of the providers can be installed
  - libsemanage-2.9-1.fc30.x86_64 does not belong to a distupgrade repository
  - problem with installed package python2-libsemanage-2.9-1.fc30.x86_64
 Problem 17: package python2-ndg_httpsclient-0.4.0-13.fc30.noarch requires
python2-pyOpenSSL, but none of the providers can be installed
  - package python2-ndg_httpsclient-0.4.0-13.fc30.noarch requires
python2.7dist(pyopenssl), but none of the providers can be installed
  - python2-pyOpenSSL-19.0.0-1.fc30.noarch does not belong to a distupgrade repository
  - problem with installed package python2-ndg_httpsclient-0.4.0-13.fc30.noarch
 Problem 18: package python2-policycoreutils-2.9-4.fc30.noarch requires policycoreutils =
2.9-4.fc30, but none of the providers can be installed
  - policycoreutils-2.9-4.fc30.x86_64 does not belong to a distupgrade repository
  - problem with installed package python2-policycoreutils-2.9-4.fc30.noarch
 Problem 19: package python2-pwquality-1.4.0-12.fc30.x86_64 requires libpwquality(x86-64)
= 1.4.0-12.fc30, but none of the providers can be installed
  - libpwquality-1.4.0-12.fc30.x86_64 does not belong to a distupgrade repository
  - problem with installed package python2-pwquality-1.4.0-12.fc30.x86_64
 Problem 20: package python2-setools-4.1.1-14.fc30.x86_64 requires python2-enum34, but
none of the providers can be installed
  - python2-enum34-1.1.6-8.fc30.noarch does not belong to a distupgrade repository
  - problem with installed package python2-setools-4.1.1-14.fc30.x86_64
 Problem 21: package python2-sphinx-1:1.8.4-1.fc30.noarch requires python-sphinx-locale =
1:1.8.4-1.fc30, but none of the providers can be installed
  - python-sphinx-locale-1:1.8.4-1.fc30.noarch does not belong to a distupgrade
repository
  - problem with installed package python2-sphinx-1:1.8.4-1.fc30.noarch
 Problem 22: package python2-sphinxcontrib-websupport-1.0.1-12.20180316git.fc30.noarch
requires python2-sqlalchemy, but none of the providers can be installed
  - python2-sqlalchemy-1.3.13-1.fc30.x86_64 does not belong to a distupgrade repository
  - problem with installed package
python2-sphinxcontrib-websupport-1.0.1-12.20180316git.fc30.noarch
 Problem 23: package system-config-users-1.3.8-6.fc29.noarch requires python2-libuser
>= 0.56, but none of the providers can be installed
  - python2-libuser-0.62-20.fc30.x86_64 does not belong to a distupgrade repository
  - problem with installed package system-config-users-1.3.8-6.fc29.noarch
 Problem 24: package python2-requests-2.22.0-2.fc30.noarch requires python2-chardet, but
none of the providers can be installed
  - package python2-requests-2.22.0-2.fc30.noarch requires python2.7dist(chardet) >=
3.0.2, but none of the providers can be installed
  - package python2-requests-2.22.0-2.fc30.noarch requires python2.7dist(chardet) <
3.1.0, but none of the providers can be installed
  - package python2-requests-toolbelt-0.9.1-1.fc30.noarch requires python2-requests, but
none of the providers can be installed
  - package python2-requests-toolbelt-0.9.1-1.fc30.noarch requires python2.7dist(requests)
>= 2.0.1, but none of the providers can be installed
  - package python2-requests-toolbelt-0.9.1-1.fc30.noarch requires python2.7dist(requests)
< 3.0.0, but none of the providers can be installed
  - python2-chardet-3.0.4-9.fc30.noarch does not belong to a distupgrade repository
  - problem with installed package python2-requests-toolbelt-0.9.1-1.fc30.noarch
 Problem 25: package python2-sphinx-1:1.8.4-1.fc30.noarch requires python2-imagesize, but
none of the providers can be installed
  - package python2-sphinx-1:1.8.4-1.fc30.noarch requires python2.7dist(imagesize), but
none of the providers can be installed
  - package python2-sphinx_rtd_theme-0.4.3-1.fc30.noarch requires python2.7dist(sphinx),
but none of the providers can be installed
  - python2-imagesize-1.1.0-2.fc30.noarch does not belong to a distupgrade repository
  - problem with installed package python2-sphinx_rtd_theme-0.4.3-1.fc30.noarch
 Problem 26: package dokuwiki-selinux-20180422b-3.fc32.noarch requires
python2-policycoreutils, but none of the providers can be installed
  - package python2-policycoreutils-2.9-4.fc30.noarch requires python2-IPy, but none of
the providers can be installed
  - problem with installed package dokuwiki-selinux-20180422b-1.fc30.noarch
  - python2-IPy-0.81-24.fc30.noarch does not belong to a distupgrade repository
  - dokuwiki-selinux-20180422b-1.fc30.noarch does not belong to a distupgrade repository
 Problem 27: problem with installed package
gimp-2:2.10.14-1.module_f30+6995+c35e2138.x86_64
  - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires
libmypaint-1.3.so.0()(64bit), but none of the providers can be installed
  - libmypaint-1.4.0-1.fc30.x86_64 does not belong to a distupgrade repository
  - gimp-2:2.10.14-1.module_f30+6995+c35e2138.x86_64 does not belong to a distupgrade
repository
 Problem 28: package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but
none of the providers can be installed
  - package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of
the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the
providers can be installed
  - problem with installed package coin-or-Clp-1.16.10-8.fc30.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none
of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none
of the providers can be installed
  - coin-or-Clp-1.16.10-8.fc30.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 29: problem with installed package python2-requests-2.22.0-2.fc30.noarch
  - package fedora-obsolete-packages-32-37.noarch obsoletes python2-smmap < 2.0.3-6
provided by python2-smmap-2.0.3-5.fc30.noarch
  - package fedora-obsolete-packages-32-36.noarch obsoletes python2-smmap < 2.0.3-6
provided by python2-smmap-2.0.3-5.fc30.noarch
  - package python2-gitdb-2.0.3-5.fc30.noarch requires python2-smmap >= 2.0.0, but none
of the providers can be installed
  - package python2-gitdb-2.0.3-5.fc30.noarch requires python2.7dist(smmap2) >= 2.0.0,
but none of the providers can be installed
  - package python2-requests-2.22.0-2.fc30.noarch requires python2-idna, but none of the
providers can be installed
  - package python2-requests-2.22.0-2.fc30.noarch requires python2.7dist(idna) >= 2.5,
but none of the providers can be installed
  - package python2-requests-2.22.0-2.fc30.noarch requires python2.7dist(idna) < 2.9,
but none of the providers can be installed
  - package python2-GitPython-2.1.11-2.fc30.noarch requires python2-gitdb >= 2.0.0, but
none of the providers can be installed
  - package python2-GitPython-2.1.11-2.fc30.noarch requires python2.7dist(gitdb2) >=
2.0.0, but none of the providers can be installed
  - python2-idna-2.7-4.fc30.noarch does not belong to a distupgrade repository
  - problem with installed package python2-GitPython-2.1.11-2.fc30.noarch
(try to add '--skip-broken' to skip uninstallable packages)

***** Workstation 1 (which I believe was set up with F31 from the get-go)

Error: 
 Problem: problem with installed package gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64
  - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires
libmypaint-1.3.so.0()(64bit), but none of the providers can be installed
  - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository
  - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade
repository
(try to add '--skip-broken' to skip uninstallable packages)

***** Workstation 2 (a frankenstein laptop)

Error: 
  Problem: problem with installed package
gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64
  - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires
libmypaint-1.3.so.0()(64bit), but none of the providers can be installed
  - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository
  - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade
repository
(try to add '--skip-broken' to skip uninstallable packages)

***** Workstation 2 (laptop first set up in 2013)
      (The python3-nikola package is one I built/mangled myself FWIW)

Error: 
 Problem 1: package python3-nikola-7.8.15-0.1.fc31.noarch requires python(abi) = 3.7, but
none of the providers can be installed
  - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package python3-nikola-7.8.15-0.1.fc31.noarch
 Problem 2: package python3-nikola-7.8.15-0.1.fc31.noarch requires
python3.7dist(pyrss2gen) >= 1.1, but none of the providers can be installed
  - package python3-nikola-extras-7.8.15-0.1.fc31.noarch requires python3-nikola = 7.8.15,
but none of the providers can be installed
  - python3-PyRSS2Gen-1.1-21.fc31.noarch does not belong to a distupgrade repository
  - problem with installed package python3-nikola-extras-7.8.15-0.1.fc31.noarch
 Problem 3: package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of
the providers can be installed
  - problem with installed package mp-3.1.0-23.20161124git1f39801.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none
of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none
of the providers can be installed
  - mp-3.1.0-23.20161124git1f39801.fc31.x86_64 does not belong to a distupgrade
repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 4: package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but
none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the
providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()(64bit), but
none of the providers can be installed
  - problem with installed package coin-or-Cbc-2.10.3-2.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none
of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none
of the providers can be installed
 - gsl-2.5-2.fc31.x86_64 does not belong to a distupgrade repository
  - coin-or-Cbc-2.10.3-2.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 5: problem with installed package
gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64
  - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires
libmypaint-1.3.so.0()(64bit), but none of the providers can be installed
  - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository
  - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade
repository
 Problem 6: package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), but
none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of
the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of
the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()(64bit), but
none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package cocoalib-0.99650-2.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the
providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the
providers can be installed
  - problem with installed package coin-or-Clp-1.17.3-3.fc31.x86_64
  - problem with installed package cocoalib-0.99650-1.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none
of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none
of the providers can be installed
  - coin-or-Clp-1.17.3-3.fc31.x86_64 does not belong to a distupgrade repository
  - cocoalib-0.99650-1.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
Problem 7: package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libClp.so.1()(64bit), but
none of the providers can be installed
  - package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libOsiClp.so.1()(64bit), but none of
the providers can be installed
  - package coin-or-Clp-1.17.3-3.fc31.x86_64 requires libCbc.so.3()(64bit), but none of
the providers can be installed
  - package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of
the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of
the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of
the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()(64bit), but
none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package enblend-4.2-16.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the
providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the
providers can be installed
  - problem with installed package enblend-4.2-14.fc31.x86_64
  - problem with installed package coin-or-Cgl-0.60.2-2.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none
of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none
of the providers can be installed
  - enblend-4.2-14.fc31.x86_64 does not belong to a distupgrade repository
  - coin-or-Cgl-0.60.2-2.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
(try to add '--allowerasing' to command line to replace conflicting packages or
'--skip-broken' to skip uninstallable packages)

***** Workstation 3 (a frankenstein beast and a lot of modular errors)

Error: 
 Problem 1: package dispcalGUI-2.5.0.0-163.1.x86_64 requires wxPython >= 2.8.6, but
none of the providers can be installed
  - python2-wxpython-3.0.2.0-26.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package dispcalGUI-2.5.0.0-163.1.x86_64
 Problem 2: package gnome-python2-desktop-2.32.0-38.fc31.x86_64 requires
gnome-python2-canvas >= 2.10.0, but none of the providers can be installed
  - gnome-python2-canvas-2.28.1-30.fc31.x86_64 does not belong to a distupgrade
repository
  - problem with installed package gnome-python2-desktop-2.32.0-38.fc31.x86_64
 Problem 3: problem with installed package opencv-contrib-3.4.8-1.fc31.x86_64
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22()(64bit), but
none of the providers can be installed
  - opencv-contrib-3.4.8-1.fc31.x86_64 does not belong to a distupgrade repository
  - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
 Problem 4: package vlc-1:3.0.9-32.fc32.x86_64 requires libvlccore.so.9()(64bit), but none
of the providers can be installed
  - problem with installed package vlc-1:3.0.9-29.fc31.x86_64
  - package vlc-core-1:3.0.9-32.fc32.x86_64 requires libprotobuf-lite.so.22()(64bit), but
none of the providers can be installed
  - vlc-core-1:3.0.9-29.fc31.x86_64 does not belong to a distupgrade repository
  - vlc-1:3.0.9-29.fc31.x86_64 does not belong to a distupgrade repository
  - package protobuf-lite-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
 Problem 5: package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of
the providers can be installed
  - problem with installed package mp-3.1.0-23.20161124git1f39801.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none
of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none
of the providers can be installed
  - mp-3.1.0-23.20161124git1f39801.fc31.x86_64 does not belong to a distupgrade
repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 6: package vlc-devel-1:3.0.9-32.fc32.x86_64 requires vlc-core(x86-64) =
1:3.0.9-32.fc32, but none of the providers can be installed
  - problem with installed package vlc-devel-1:3.0.9-29.fc31.x86_64
  - package vlc-core-1:3.0.9-32.fc32.x86_64 requires libprotobuf-lite.so.22()(64bit), but
none of the providers can be installed
  - vlc-devel-1:3.0.9-29.fc31.x86_64 does not belong to a distupgrade repository
  - package protobuf-lite-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
Problem 7: problem with installed package vlc-core-1:3.0.9-29.fc31.x86_64
  - package vlc-core-1:3.0.9-29.fc31.x86_64 requires libdvdread.so.4()(64bit), but none of
the providers can be installed
  - package vlc-core-1:3.0.9-32.fc32.x86_64 requires libprotobuf-lite.so.22()(64bit), but
none of the providers can be installed
  - libdvdread-6.0.2-2.fc31.x86_64 does not belong to a distupgrade repository
  - package protobuf-lite-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
 Problem 8: package opencv-core-4.2.0-3.fc32.x86_64 requires
libopencv_calib3d.so.4.2()(64bit), but none of the providers can be installed
  - package opencv-core-4.2.0-3.fc32.x86_64 requires libopencv_optflow.so.4.2()(64bit),
but none of the providers can be installed
  - problem with installed package opencv-core-3.4.8-1.fc31.x86_64
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22()(64bit), but
none of the providers can be installed
  - opencv-core-3.4.8-1.fc31.x86_64 does not belong to a distupgrade repository
  - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
 Problem 9: package opencv-4.2.0-3.fc32.x86_64 requires libopencv_calib3d.so.4.2()(64bit),
but none of the providers can be installed
  - package opencv-4.2.0-3.fc32.x86_64 requires libopencv_aruco.so.4.2()(64bit), but none
of the providers can be installed
  - package opencv-4.2.0-3.fc32.x86_64 requires libopencv_xobjdetect.so.4.2()(64bit), but
none of the providers can be installed
  - problem with installed package opencv-3.4.8-1.fc31.x86_64
  - package opencv-contrib-4.2.0-3.fc32.x86_64 requires libprotobuf.so.22()(64bit), but
none of the providers can be installed
  - opencv-3.4.8-1.fc31.x86_64 does not belong to a distupgrade repository
  - package protobuf-3.11.2-2.fc32.x86_64 is filtered out by modular filtering
 Problem 10: package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but
none of the providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the
providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()(64bit), but
none of the providers can be installed
  - problem with installed package coin-or-Cbc-2.10.3-2.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none
of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none
of the providers can be installed
  - gsl-2.5-2.fc31.x86_64 does not belong to a distupgrade repository
  - coin-or-Cbc-2.10.3-2.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 11: package gimp-data-extras-2.0.2-21.fc32.noarch requires gimp >= 2:2.0, but
none of the providers can be installed
  - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires
libmypaint-1.3.so.0()(64bit), but none of the providers can be installed
  - problem with installed package gimp-data-extras-2.0.2-20.fc31.noarch
  - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository
  - gimp-data-extras-2.0.2-20.fc31.noarch does not belong to a distupgrade repository
  - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade
repository
  - package gimp-2:2.10.18-1.fc32.x86_64 is filtered out by modular filtering
Problem 12: package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), but
none of the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of
the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of
the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()(64bit), but
none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package cocoalib-0.99650-2.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the
providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the
providers can be installed
  - problem with installed package coin-or-Clp-1.17.3-3.fc31.x86_64
  - problem with installed package cocoalib-0.99650-1.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none
of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none
of the providers can be installed
  - coin-or-Clp-1.17.3-3.fc31.x86_64 does not belong to a distupgrade repository
  - cocoalib-0.99650-1.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
 Problem 13: package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libClp.so.1()(64bit), but
none of the providers can be installed
  - package coin-or-Cgl-0.60.3-1.fc32.x86_64 requires libOsiClp.so.1()(64bit), but none of
the providers can be installed
  - package coin-or-Clp-1.17.3-3.fc31.x86_64 requires libCbc.so.3()(64bit), but none of
the providers can be installed
  - package coin-or-Clp-1.17.5-1.fc32.x86_64 requires libCbc.so.3()(64bit), but none of
the providers can be installed
  - package coin-or-Cbc-2.10.3-2.fc31.x86_64 requires libasl.so.3()(64bit), but none of
the providers can be installed
  - package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()(64bit), but none of
the providers can be installed
  - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()(64bit), but
none of the providers can be installed
  - cannot install both gsl-2.6-2.fc32.x86_64 and gsl-2.5-2.fc31.x86_64
  - package enblend-4.2-16.fc32.x86_64 requires libgsl.so.25()(64bit), but none of the
providers can be installed
  - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but none of the
providers can be installed
  - problem with installed package enblend-4.2-14.fc31.x86_64
  - problem with installed package coin-or-Cgl-0.60.2-2.fc31.x86_64
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-library), but none
of the providers can be installed
  - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-compiler), but none
of the providers can be installed
  - enblend-4.2-14.fc31.x86_64 does not belong to a distupgrade repository
  - coin-or-Cgl-0.60.2-2.fc31.x86_64 does not belong to a distupgrade repository
  - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering

 - Solomon
-- 
Solomon Peachy			       pizza at shaftnet dot org
High Springs, FL                          ^^ (email/xmpp) ^^
Quidquid latine dictum sit, altum videtur.

[Ankur Sinha]

This is what I got:

Modular dependency problems:

 Problem 1: conflicting requests
  - nothing provides module(platform:f31) needed by module
bat:latest:3120190813194409:22d7e2a5-0.x86_64
 Problem 2: conflicting requests
  - nothing provides module(platform:f31) needed by module
libgit2:0.28:3120190812145959:f636be4b-0.x86_64
 Problem 3: conflicting requests
  - nothing provides module(platform:f31) needed by module
meson:latest:3120191009081836:dc56099c-0.x86_64
 Problem 4: conflicting requests
  - nothing provides module(platform:f31) needed by module
newsboat:latest:3120190728140405:22d7e2a5-0.x86_64
 Problem 5: conflicting requests
  - nothing provides module(platform:f31) needed by module
ninja:latest:3120190304180949:f636be4b-0.x86_64
Error:
 Problem 1: problem with installed package docker-compose-1.25.4-1.fc31.noarch
  - docker-compose-1.25.4-1.fc31.noarch does not belong to a distupgrade repository
  - nothing provides python3.8dist(dockerpty) >= 0.4.1 needed by
docker-compose-1.24.1-3.fc32.noarch
 Problem 2: package docker-2:1.13.1-68.git47e2230.fc30.x86_64 requires atomic-registries
>= 1.19.1-6, but none of the providers can be installed
  - atomic-registries-1.22.1-28.gitb507039.fc30.x86_64 does not belong to a distupgrade
repository
  - problem with installed package docker-2:1.13.1-68.git47e2230.fc30.x86_64
 Problem 3: problem with installed package texlive-stix-9:svn47652-15.fc31.noarch
  - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of
the providers can be installed
  - texlive-stix-9:svn47652-15.fc31.noarch does not belong to a distupgrade repository
  - stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository
 Problem 4: package maven-doxia-1.9-4.fc32.noarch requires
mvn(org.codehaus.plexus:plexus-component-metadata), but none of the providers can be
installed
  - problem with installed package maven-doxia-module-fo-1.7-11.fc31.noarch
  - package plexus-containers-component-metadata-2.1.0-2.fc32.noarch requires
mvn(org.codehaus.plexus:plexus-component-annotations) = 2.1.0, but none of the providers
can be installed
  - maven-doxia-module-fo-1.7-11.fc31.noarch does not belong to a distupgrade repository
  - package plexus-containers-component-annotations-2.1.0-2.fc32.noarch is filtered out by
modular filtering
 Problem 5: package maven-doxia-1.9-4.fc32.noarch requires
mvn(org.codehaus.plexus:plexus-component-metadata), but none of the providers can be
installed
  - problem with installed package maven-doxia-module-markdown-1.7-11.fc31.noarch
  - package plexus-containers-component-metadata-2.1.0-2.fc32.noarch requires
mvn(org.codehaus.plexus:plexus-component-annotations) = 2.1.0, but none of the providers
can be installed
  - maven-doxia-module-markdown-1.7-11.fc31.noarch does not belong to a distupgrade
repository
  - package plexus-containers-component-annotations-2.1.0-2.fc32.noarch is filtered out by
modular filtering
(try to add '--skip-broken' to skip uninstallable packages)


The stix-fonts package got rid of the stix-math-fonts package at some
point. So, a texlive rebuild would probably fix the dep error unless
it's an explicit Requires which will require a spec tweak?
https://src.fedoraproject.org/rpms/stix-fonts/c/b60f676a2a5df7e5af9b3230b...

Dunno about the other maven and modular bits.

-- 
Thanks,
Regards,
Ankur Sinha "FranciscoD" (He / Him / His) |
https://fedoraproject.org/wiki/User:Ankursinha
Time zone: Europe/London

[Adam Williamson]

On Wed, 2020-03-04 at 19:14 +0100, Marcin Juszkiewicz wrote:
>  W dniu 04.03.2020 o 16:33, Marcin Juszkiewicz pisze:
>  > W dniu 04.03.2020 o 16:24, Miroslav Suchý pisze:
>  > > Do you want to make Fedora 32 better? Please spend 1 minute of your time and
> try to run:
>  > > 
>  > >   # Run this only if you use default Fedora modules
>  > >   # next time you run any DNF command default modules will be enabled again
>  > >   sudo dnf module reset '*'
>  > > 
>  > >   sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
>  > >     --enablerepo=updates-testing --enablerepo=updates-testing-modular \
>  > >     distro-sync
>  > > 
>  > 
>  >  Problem: package moodbar-0.1.2-19.fc29.x86_64 requires
> libgstbase-0.10.so.0()(64bit), but none of the providers can be installed
>  >   - package moodbar-0.1.2-19.fc29.x86_64 requires libgstreamer-0.10.so.0()(64bit),
> but none of the providers can be installed
>  >   - gstreamer-0.10.36-24.fc31.x86_64 does not belong to a distupgrade repository
>  >   - problem with installed package moodbar-0.1.2-19.fc29.x86_64
>  > 
>  > Removed moodbar and next try was fine.
>  
>  Looked closer - there are six downgrades:
>  
>  Instalowanie poprzedniej wersji:
>   firefox                   x86_64 72.0.2-3.fc32        fedora           98 M
>   java-1.8.0-openjdk-headless
>                             x86_64 1:1.8.0.242.b06-0.0.ea.fc32
>                                                         fedora           32 M
>   kf5-kirigami2             x86_64 5.67.0-1.fc32        fedora          248 k
>   libarchive                x86_64 3.4.0-2.fc32         fedora          388 k
>   libarchive-devel          x86_64 3.4.0-2.fc32         fedora          124 k
>   qqc2-desktop-style        x86_64 5.67.0-1.fc32        fedora          100 k 
This is fairly common during freezes; if someone submits an update to
F30/F31/F32 it can go stable for F30 and F31 but not for F32 due to the
freeze. So it's not unusual for things to get 'ahead' in the stable
releases while the branched release is frozen.

Since upgrades use distro-sync these days it's not really something to
worry about.

(Additionally, for Firefox, F32 and F33 builds have been failing for
several days, but a successful F32 build just happened today. There is
a proposed FE for getting it into the Beta.)
-- 
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net

[Adam Williamson]

On Wed, 2020-03-04 at 18:19 +0000, Ian McInerney wrote:
>  What is supposed to happen with any packages that depend on python2
> that
>  are currently installed on the system? I know that the actual packages have
>  been retired since python2 is retired now, but currently DNF is blocking
>  the upgrade of the system (not just marking them for removal). 
Something should obsolete them. Depending on circumstances and packager
preferences that could be the python3 package or fedora-obsolete-
packages, but all retired packages (including all script-retired
python2 packages) need to be obsoleted by *something*.
-- 
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net

[Adam Williamson]

On Wed, 2020-03-04 at 11:09 -0800, Adam Williamson wrote:
>  On Wed, 2020-03-04 at 18:19 +0000, Ian McInerney wrote:
>  > What is supposed to happen with any packages that depend on python2 that
>  > are currently installed on the system? I know that the actual packages have
>  > been retired since python2 is retired now, but currently DNF is blocking
>  > the upgrade of the system (not just marking them for removal).
>  
>  Something should obsolete them. Depending on circumstances and packager
>  preferences that could be the python3 package or fedora-obsolete-
>  packages, but all retired packages (including all script-retired
>  python2 packages) need to be obsoleted by *something*. 
Er, sorry, to be clear here I mean that python3-foo can obsolete
python2-foo. Not that python3 can obsolete python2-foo.
-- 
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net

[Miroslav Suchý]

Dne 04. 03. 20 v 20:04 Ankur Sinha napsal(a):
>   Problem 1: conflicting requests
>    - nothing provides module(platform:f31) needed by module
> bat:latest:3120190813194409:22d7e2a5-0.x86_64
>   Problem 2: conflicting requests
>    - nothing provides module(platform:f31) needed by module
> libgit2:0.28:3120190812145959:f636be4b-0.x86_64
>   Problem 3: conflicting requests
>    - nothing provides module(platform:f31) needed by module
> meson:latest:3120191009081836:dc56099c-0.x86_64
>   Problem 4: conflicting requests
>    - nothing provides module(platform:f31) needed by module
> newsboat:latest:3120190728140405:22d7e2a5-0.x86_64
>   Problem 5: conflicting requests
>    - nothing provides module(platform:f31) needed by module
> ninja:latest:3120190304180949:f636be4b-0.x86_64 
This should be solved by
  dnf module reset '*'
did you run this command? It was mentioned in the first email.

-- 
Miroslav Suchy, RHCA
Red Hat, Associate Manager ABRT/Copr, #brno, #fedora-buildsys

[José Abílio Matos]

On Wednesday, 4 March 2020 16.05.14 WET José Abílio Matos wrote:
>  OK, I have just 15 problems.  
Now with module reset and removing (retext from F29):

Error: 
 Problem 1: package python2-pytest-cov-2.8.1-5.fc31.noarch requires 
python2.7dist(coverage) >= 4.4, but none of the providers can be installed
  - python2-coverage-4.5.4-2.fc31.x86_64 does not belong to a distupgrade 
repository
  - problem with installed package python2-pytest-cov-2.8.1-5.fc31.noarch
 Problem 2: problem with installed package pdf-stapler-0.3.3-15.fc31.noarch
  - package pdf-stapler-1.0.0-0.3.20191215git8753251.fc32.noarch requires 
python3-staplelib = 1.0.0-0.3.20191215git8753251.fc32, but none of the 
providers can be installed
  - pdf-stapler-0.3.3-15.fc31.noarch does not belong to a distupgrade 
repository
  - nothing provides (python3.8dist(more-itertools) >= 2.2 with 
python3.8dist(more-itertools) < 6) needed by python3-
staplelib-1.0.0-0.3.20191215git8753251.fc32.noarch
 Problem 3: package ktp-common-internals-19.12.2-1.fc32.x86_64 requires 
libtelepathy-qt5-service.so.0()(64bit), but none of the providers can be 
installed
  - problem with installed package ktp-common-internals-19.12.1-1.fc31.x86_64
  - telepathy-qt5-0.9.7-9.fc31.x86_64 does not belong to a distupgrade 
repository
  - ktp-common-internals-19.12.1-1.fc31.x86_64 does not belong to a 
distupgrade repository
 Problem 4: package texlive-collection-fontsextra-9:svn51763-18.fc32.noarch 
requires texlive-stix, but none of the providers can be installed
  - problem with installed package texlive-collection-
fontsextra-9:svn51763-15.fc31.noarch
  - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, 
but none of the providers can be installed
  - texlive-stix-9:svn47652-15.fc31.noarch does not belong to a distupgrade 
repository
  - texlive-collection-fontsextra-9:svn51763-15.fc31.noarch does not belong to 
a distupgrade repository
  - stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade 
repository
 Problem 5: problem with installed package python3-codacy-
coverage-1.3.11-1.fc30.noarch
  - package python3-codacy-coverage-1.3.11-1.fc30.noarch requires python(abi) 
= 3.7, but none of the providers can be installed
  - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
 Problem 6: problem with installed package texlive-
stix-9:svn47652-15.fc31.noarch
  - package texlive-stix-9:svn47652-15.fc31.noarch requires stix-math-fonts, 
but none of the providers can be installed
  - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, 
but none of the providers can be installed
  - package stix-math-fonts-1.1.0-15.fc31.noarch requires stix-fonts = 
1.1.0-15.fc31, but none of the providers can be installed
  - stix-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade 
repository
(try to add '--skip-broken' to skip uninstallable packages)


-- 
José Abílio

[Solomon Peachy]

On Wed, Mar 04, 2020 at 02:00:18PM -0500, Solomon Peachy wrote:
>  ***** A third server with F30 went kaboom quite spectactularly,
>        mostly due to python2 stuffs: 
After a dnf module reset, it went from 29 problems to 27, again mostly 
python2 related.

>  ***** Workstation 1 (which I believe was set up with F31 from the
> get-go) 
After a dnf module reset, this now upgrades cleanly.
 
>  ***** Workstation 2 (laptop first set up in 2013)
>        (The python3-nikola package is one I built/mangled myself FWIW) 
After dnf module reset, it's a lot cleaner.  python3-PyRSS2Gen is the 
only real problem here:

Error: 
 Problem 1: package python3-nikola-7.8.15-0.1.fc31.noarch requires python(abi) = 3.7, but
none of the providers can be installed
  - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package python3-nikola-7.8.15-0.1.fc31.noarch
 Problem 2: package python3-nikola-7.8.15-0.1.fc31.noarch requires
python3.7dist(pyrss2gen) >= 1.1, but none of the providers can be installed
  - package python3-nikola-extras-7.8.15-0.1.fc31.noarch requires python3-nikola = 7.8.15,
but none of the providers can be installed
  - python3-PyRSS2Gen-1.1-21.fc31.noarch does not belong to a distupgrade repository
  - problem with installed package python3-nikola-extras-7.8.15-0.1.fc31.noarch
(try to add '--skip-broken' to skip uninstallable packages)

>  ***** Workstation 3 (a frankenstein beast and a lot of modular
> errors) 
With 'dnf module reset' this is a lot cleaner.  dispcalGUI was snagged 
from OBS, so not a fedora problem.

Error: 
 Problem 1: package dispcalGUI-2.5.0.0-163.1.x86_64 requires wxPython >= 2.8.6, but
none of the providers can be installed
  - python2-wxpython-3.0.2.0-26.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package dispcalGUI-2.5.0.0-163.1.x86_64
 Problem 2: package gnome-python2-desktop-2.32.0-38.fc31.x86_64 requires
gnome-python2-canvas >= 2.10.0, but none of the providers can be installed
  - gnome-python2-canvas-2.28.1-30.fc31.x86_64 does not belong to a distupgrade
repository
  - problem with installed package gnome-python2-desktop-2.32.0-38.fc31.x86_64
(try to add '--skip-broken' to skip uninstallable packages)

 - Solomon
-- 
Solomon Peachy			       pizza at shaftnet dot org
High Springs, FL                          ^^ (email/xmpp) ^^
Quidquid latine dictum sit, altum videtur.

[Ankur Sinha]

On Wed, Mar 04, 2020 20:19:39 +0100, Miroslav Suchý wrote:
>  Dne 04. 03. 20 v 20:04 Ankur Sinha napsal(a):
>  >  Problem 1: conflicting requests
>  >   - nothing provides module(platform:f31) needed by module
> bat:latest:3120190813194409:22d7e2a5-0.x86_64
>  >  Problem 2: conflicting requests
>  >   - nothing provides module(platform:f31) needed by module
> libgit2:0.28:3120190812145959:f636be4b-0.x86_64
>  >  Problem 3: conflicting requests
>  >   - nothing provides module(platform:f31) needed by module
> meson:latest:3120191009081836:dc56099c-0.x86_64
>  >  Problem 4: conflicting requests
>  >   - nothing provides module(platform:f31) needed by module
> newsboat:latest:3120190728140405:22d7e2a5-0.x86_64
>  >  Problem 5: conflicting requests
>  >   - nothing provides module(platform:f31) needed by module
> ninja:latest:3120190304180949:f636be4b-0.x86_64
>  
>  This should be solved by
>    dnf module reset '*'
>  did you run this command? It was mentioned in the first email. 
Ah, missed that! Sorry! Now I have:

Ignoring repositories: copr:copr.fedorainfracloud.org:flatcap:neomutt
Last metadata expiration check: 0:43:02 ago on Wed 04 Mar 2020 18:56:03 GMT.
Error: 
 Problem 1: problem with installed package docker-compose-1.25.4-1.fc31.noarch
  - docker-compose-1.25.4-1.fc31.noarch does not belong to a distupgrade repository
  - nothing provides python3.8dist(dockerpty) >= 0.4.1 needed by
docker-compose-1.24.1-3.fc32.noarch
 Problem 2: package docker-2:1.13.1-68.git47e2230.fc30.x86_64 requires atomic-registries
>= 1.19.1-6, but none of the providers can be installed
  - atomic-registries-1.22.1-28.gitb507039.fc30.x86_64 does not belong to a distupgrade
repository
  - problem with installed package docker-2:1.13.1-68.git47e2230.fc30.x86_64
 Problem 3: problem with installed package texlive-stix-9:svn47652-15.fc31.noarch
  - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of
the providers can be installed
  - texlive-stix-9:svn47652-15.fc31.noarch does not belong to a distupgrade repository
  - stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository
(try to add '--skip-broken' to skip uninstallable packages)


-- 
Thanks,
Regards,
Ankur Sinha "FranciscoD" (He / Him / His) |
https://fedoraproject.org/wiki/User:Ankursinha
Time zone: Europe/London

[Ian McInerney]

Thanks.

Bugs filed for

Exaile: https://bugzilla.redhat.com/show_bug.cgi?id=1810253

wxPython-devel: https://bugzilla.redhat.com/show_bug.cgi?id=1810248

On Wed, Mar 4, 2020 at 7:12 PM Adam Williamson <adamwill(a)fedoraproject.org&gt;
wrote:

>  On Wed, 2020-03-04 at 11:09 -0800, Adam Williamson wrote:
>  > On Wed, 2020-03-04 at 18:19 +0000, Ian McInerney wrote:
>  > > What is supposed to happen with any packages that depend on python2
>  that
>  > > are currently installed on the system? I know that the actual packages
>  have
>  > > been retired since python2 is retired now, but currently DNF is
>  blocking
>  > > the upgrade of the system (not just marking them for removal).
>  >
>  > Something should obsolete them. Depending on circumstances and packager
>  > preferences that could be the python3 package or fedora-obsolete-
>  > packages, but all retired packages (including all script-retired
>  > python2 packages) need to be obsoleted by *something*.
>
>  Er, sorry, to be clear here I mean that python3-foo can obsolete
>  python2-foo. Not that python3 can obsolete python2-foo.
>  --
>  Adam Williamson
>  Fedora QA Community Monkey
>  IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
>  http://www.happyassassin.net
>
>

[stan]

On Wed, 4 Mar 2020 09:22:12 -0700
stan via devel <devel(a)lists.fedoraproject.org&gt; wrote:

>  On Wed, 4 Mar 2020 16:24:58 +0100
>  Miroslav Suchý <msuchy(a)redhat.com&gt; wrote:
>  
>  > But very likely you get some dependency problem now. In that case,
>  > please report it against the appropriate package. Or against
>  > fedora-obsolete-packages if that package should be removed in Fedora
>  > 32. Please check existing reports first: https://red.ht/2kuBDPu
>  
>  I hit 124 issues.  I have attached the dnf output.  That's a lot of
>  bugzillas to open;  is there a better way? 
When I looked at them, there were a lot of python2 problems.  Since it
is going away in F32, I just deleted them as problems.  That leaves
only 36 issues.  Much more manageable.  Attached.

[Adam Williamson]

On Wed, 2020-03-04 at 14:25 -0700, stan via devel wrote:
>  On Wed, 4 Mar 2020 09:22:12 -0700
>  stan via devel <devel(a)lists.fedoraproject.org&gt; wrote:
>  
>  > On Wed, 4 Mar 2020 16:24:58 +0100
>  > Miroslav Suchý <msuchy(a)redhat.com&gt; wrote:
>  > 
>  > > But very likely you get some dependency problem now. In that case,
>  > > please report it against the appropriate package. Or against
>  > > fedora-obsolete-packages if that package should be removed in Fedora
>  > > 32. Please check existing reports first: https://red.ht/2kuBDPu
>  > 
>  > I hit 124 issues.  I have attached the dnf output.  That's a lot of
>  > bugzillas to open;  is there a better way?
>  
>  When I looked at them, there were a lot of python2 problems.  Since it
>  is going away in F32, I just deleted them as problems. 
Those are exactly the 'problems' we're trying to detect, though. Python
2 packages don't just go away by magic, unless you pass --allow-erasing 
, which can potentially lead to things being removed you didn't
actually want to be removed. They ought to be obsoleted properly. The
reason Miroslav is asking people to run these commands is to identify
packages - including Python 2 packages - which *should* be properly
obsoleted but are not, among other issues.
-- 
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net

[Fabio Valentini]

On Wed, Mar 4, 2020 at 4:25 PM Miroslav Suchý <msuchy(a)redhat.com&gt; wrote:
>  Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
>
>    # Run this only if you use default Fedora modules
>    # next time you run any DNF command default modules will be enabled again
>    sudo dnf module reset '*'
>
>    sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
>      --enablerepo=updates-testing --enablerepo=updates-testing-modular \
>      distro-sync
>
>  This command does not replace `dnf system-upgrade`, but it will reveal potential
> problems. You may also run `dnf
>  upgrade` before running this command.
>
>
>  If you get this prompt:
>
>    ...
>    Total download size: XXX M
>    Is this ok [y/N]:
>
>  you can answer N and nothing happens, no need to test the actual upgrade.
>
>  But very likely you get some dependency problem now. In that case, please report it
> against the appropriate package. Or
>  against fedora-obsolete-packages if that package should be removed in Fedora 32. Please
> check existing reports first:
>  https://red.ht/2kuBDPu
>
>  Thank you 
I have modular repos disabled on my systems, so I'm not getting any
upgrade issues related to that.
But there are a few package downgrades that are actual issues:

Downgrading:
 firefox                             x86_64 72.0.2-3.fc32
firefox 73.0.1 indeed is missing from f32+, but I think this is a known issue.

 java-1.8.0-openjdk                  x86_64 1:1.8.0.242.b06-0.0.ea.fc32
 java-1.8.0-openjdk-devel            x86_64 1:1.8.0.242.b06-0.0.ea.fc32
 java-1.8.0-openjdk-headless         x86_64 1:1.8.0.242.b06-0.0.ea.fc32
This OpenJDK update seems to be missing from f32+ as well ...

 libarchive                          x86_64 3.4.0-2.fc32
This seems to be fixed by an update in updates-testing.

 openblas                            x86_64 0.3.7-2.fc32
 openblas-Rblas                      x86_64 0.3.7-2.fc32
 openblas-threads                    x86_64 0.3.7-2.fc32
This is also fixed by an update in updates-testing.

 pciutils                            x86_64 3.6.3-2.fc32
 pciutils-libs                       x86_64 3.6.3-2.fc32
This is missing an update for fedora 32 - 3.6.4 was built for f31+,
but no update for f32 was created.
See: https://bodhi.fedoraproject.org/updates/FEDORA-2020-875081b2ba#comment-12...

 python2-setuptools                  noarch 41.2.0-2.fc32
This is also a downgrade, without an update on fedora 32. But probably
unfixable since newer versions of setuptools don't support python2, I
think.

Fabio


> --
> Miroslav Suchy, RHCA
> Red Hat, Associate Manager ABRT/Copr, #brno, #fedora-buildsys
> _______________________________________________
> devel mailing list -- devel(a)lists.fedoraproject.org
> To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
https://lists.fedoraproject.org/archives/list/[e-mail]

[Miro Hrončok]

On 04. 03. 20 20:41, Ankur Sinha wrote:
>  Error:
>    Problem 1: problem with installed package docker-compose-1.25.4-1.fc31.noarch
>     - docker-compose-1.25.4-1.fc31.noarch does not belong to a distupgrade repository
>     - nothing provides python3.8dist(dockerpty) >= 0.4.1 needed by
> docker-compose-1.24.1-3.fc32.noarch 
https://bugzilla.redhat.com/show_bug.cgi?id=1794272

>    Problem 2: package docker-2:1.13.1-68.git47e2230.fc30.x86_64
> requires atomic-registries >= 1.19.1-6, but none of the providers can be installed
>     - atomic-registries-1.22.1-28.gitb507039.fc30.x86_64 does not belong to a distupgrade
> repository
>     - problem with installed package docker-2:1.13.1-68.git47e2230.fc30.x86_64 
https://bugzilla.redhat.com/show_bug.cgi?id=1804305


-- 
Miro Hrončok
--
Phone: [phone]
IRC: mhroncok

[Dan Čermák]

Miroslav Suchý <msuchy(a)redhat.com&gt; writes:

>  Do you want to make Fedora 32 better? Please spend 1 minute of your
> time and try to run:
>
>    # Run this only if you use default Fedora modules
>    # next time you run any DNF command default modules will be enabled again
>    sudo dnf module reset '*'
>
>    sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
>      --enablerepo=updates-testing --enablerepo=updates-testing-modular \
>      distro-sync
>
>  This command does not replace `dnf system-upgrade`, but it will reveal potential
> problems. You may also run `dnf
>  upgrade` before running this command.
>
>
>  If you get this prompt:
>
>    ...
>    Total download size: XXX M
>    Is this ok [y/N]:
>
>  you can answer N and nothing happens, no need to test the actual
>  upgrade. 
Ran into some issues with zypper:
Error:
 Problem 1: problem with installed package zypper-1.14.33-1.fc31.x86_64
  - zypper-1.14.33-1.fc31.x86_64 does not belong to a distupgrade repository
  - nothing provides libzypp.so.1712()(64bit) needed by zypper-1.14.32-1.fc32.x86_64
  - nothing provides libzypp.so.1712(ZYPP_plain)(64bit) needed by
zypper-1.14.32-1.fc32.x86_64
 Problem 2: problem with installed package zypper-log-1.14.33-1.fc31.noarch
  - package zypper-log-1.14.32-1.fc32.noarch requires zypper = 1.14.32-1.fc32, but none of
the providers can be installed
  - zypper-log-1.14.33-1.fc31.noarch does not belong to a distupgrade repository
  - nothing provides libzypp.so.1712()(64bit) needed by zypper-1.14.32-1.fc32.x86_64
  - nothing provides libzypp.so.1712(ZYPP_plain)(64bit) needed by
zypper-1.14.32-1.fc32.x86_64


Reported here: https://bugzilla.redhat.com/show_bug.cgi?id=1810320


Cheers,

Dan

[Miro Hrončok]

On 04. 03. 20 23:01, Fabio Valentini wrote:
>    python2-setuptools                  noarch 41.2.0-2.fc32
>  This is also a downgrade, without an update on fedora 32. But probably
>  unfixable since newer versions of setuptools don't support python2, I
>  think. 
I have updated python-setuptools (both py2 and py3) in F31.

If you care, we can update python2-setuptools in F32 as well (I don't care 
enough). It is fixable (to ~0 benefit).

-- 
Miro Hrončok
--
Phone: [phone]
IRC: mhroncok

[Ian McInerney]

>   Problem 3: problem with installed package
>  texlive-stix-9:svn47652-15.fc31.noarch
>    - package texlive-stix-9:svn47652-18.fc32.noarch requires
>  stix-math-fonts, but none of the providers can be installed
>    - texlive-stix-9:svn47652-15.fc31.noarch does not belong to a
>  distupgrade repository
>    - stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade
>  repository
>  (try to add '--skip-broken' to skip uninstallable packages)
>
>  
https://bugzilla.redhat.com/show_bug.cgi?id=1806271

[Zbigniew Jędrzejewski-Szmek]

On Wed, Mar 04, 2020 at 09:19:03AM -0700, Nathanael D. Noblet wrote:
>  On Wed, 2020-03-04 at 16:24 +0100, Miroslav Suchý wrote:
>  > 
>  > But very likely you get some dependency problem now. In that case,
>  > please report it against the appropriate package. Or
>  > against fedora-obsolete-packages if that package should be removed in
>  > Fedora 32. Please check existing reports first:
>  > https://red.ht/2kuBDPu
>  > 
>  [gnat@iridium ~]$ sudo dnf --releasever=32 --
>  setopt=module_platform_id=platform:f32     --enablerepo=updates-testing 
>  --enablerepo=updates-testing-modular     distro-sync
>  Last metadata expiration check: 0:01:26 ago on Wed 04 Mar 2020 09:13:44
>  AM MST.
>  Error: 
>   Problem: package system-config-keyboard-1.4.0-18.fc31.noarch requires
>  python2-newt, but none of the providers can be installed
>    - python2-newt-0.52.21-2.fc31.x86_64 does not belong to a distupgrade
>  repository
>    - problem with installed package system-config-keyboard-1.4.0-
>  18.fc31.noarch
>  
>  
>  If I'm reading that correctly system-config-keyboard is requiring a
>  python2 package. Is system-config-keyboard supposed to be obsolete?
>  Seems like probably not but I'm not sure what to do here. 
Yes, it's been retired [1]. Both should be added to fedora-obsolete-packages.

[1]
https://src.fedoraproject.org/rpms/system-config-keyboard/c/01411c1da57bf...

Zbyszek

[Miro Hrončok]

On 06. 03. 20 13:58, Zbigniew Jędrzejewski-Szmek wrote:
>  Yes, it's been retired [1]. Both should be added to
> fedora-obsolete-packages 
https://src.fedoraproject.org/rpms/fedora-obsolete-packages/c/a539b99a029...

-- 
Miro Hrončok
--
Phone: [phone]
IRC: mhroncok

[Zbigniew Jędrzejewski-Szmek]

On Wed, Mar 04, 2020 at 02:25:15PM -0700, stan via devel wrote:
>  Error: 
>   Problem 1: problem with installed package
> python3-django-post_office-3.1.0-5.fc31.noarch
>    - python3-django-post_office-3.1.0-5.fc31.noarch does not belong to a distupgrade
> repository
>    - nothing provides python3.8dist(jsonfield) needed by
> python3-django-post_office-3.1.0-6.fc32.noarch 
That is strange: python3-django-jsonfield-2.0.2-9.fc32.noarch.rpm has
Provides: python3dist(jsonfield) = 2.0.2, python3.8dist(jsonfield) = 2.0.2.

Zbyszek

[Miro Hrončok]

On 06. 03. 20 14:59, Zbigniew Jędrzejewski-Szmek wrote:
>  On Wed, Mar 04, 2020 at 02:25:15PM -0700, stan via devel wrote:
> > Error:
> >   Problem 1: problem with installed package
> python3-django-post_office-3.1.0-5.fc31.noarch
> >    - python3-django-post_office-3.1.0-5.fc31.noarch does not belong to a distupgrade
> repository
> >    - nothing provides python3.8dist(jsonfield) needed by
> python3-django-post_office-3.1.0-6.fc32.noarch
>  
>  That is strange: python3-django-jsonfield-2.0.2-9.fc32.noarch.rpm has
>  Provides: python3dist(jsonfield) = 2.0.2, python3.8dist(jsonfield) = 2.0.2. 
$ repoquery --repo={fedora,updates{,-testing}} --releasever 32 --latest=1 
--obsoletes fedora-obsolete-packages | grep jsonfield
python2-django-jsonfield < 1.0.3-6
python3-django-jsonfield < 2.0.2-9

But python3-django-post_office is not retired, it just has broken deps:

https://bugzilla.redhat.com/show_bug.cgi?id=1770825

See also https://pagure.io/releng/issue/9287


-- 
Miro Hrončok
--
Phone: [phone]
IRC: mhroncok

[Zbigniew Jędrzejewski-Szmek]

Error: 
 Problem 1: problem with installed package
rubygem-asciidoctor-pdf-1.5.0-0.12.beta.6.fc31.noarch
  - rubygem-asciidoctor-pdf-1.5.0-0.12.beta.6.fc31.noarch does not belong to a distupgrade
repository
  - nothing provides (rubygem(treetop) >= 1.5.0 with rubygem(treetop) < 1.6) needed
by rubygem-asciidoctor-pdf-1.5.0-0.11.beta.6.fc32.noarch
 Problem 2: problem with installed package python3-oletools-0.54.2-2.fc31.noarch
  - python3-oletools-0.54.2-2.fc31.noarch does not belong to a distupgrade repository
  - nothing provides python3.8dist(pcodedmp) >= 1.2.5 needed by
python3-oletools-0.55-2.fc32.noarch
I filed https://bugzilla.redhat.com/show_bug.cgi?id=1811089 for that.

 Problem 3: problem with installed package python3-fsleyes-props-1.6.7-1.fc31.noarch
  - python3-fsleyes-props-1.6.7-1.fc31.noarch does not belong to a distupgrade repository
  - nothing provides python3.8dist(flseyes-widgets) >= 0.6 needed by
python3-fsleyes-props-1.6.7-3.fc32.noarch
 Problem 4: package docker-2:1.13.1-68.git47e2230.fc30.x86_64 requires atomic-registries
>= 1.19.1-6, but none of the providers can be installed
  - atomic-registries-1.22.1-28.gitb507039.fc30.x86_64 does not belong to a distupgrade
repository
  - problem with installed package docker-2:1.13.1-68.git47e2230.fc30.x86_64
Hmmm.

 Problem 5: package python2-qt5-devel-5.13.2-3.fc31.x86_64 requires python2-qt5(x86-64) =
5.13.2-3.fc31, but none of the providers can be installed
  - python2-qt5-5.13.2-3.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package python2-qt5-devel-5.13.2-3.fc31.x86_64
 Problem 6: package python3-pypdf2-1.26.0-13.fc32.noarch requires python(abi) = 3.7, but
none of the providers can be installed
  - python3-3.7.6-2.fc31.i686 does not belong to a distupgrade repository
  - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package python3-pypdf2-1.26.0-13.fc32.noarch
 Problem 7: problem with installed package minetest-0.4.17.1-5.fc31.x86_64
  - package minetest-5.1.0-1.fc32.x86_64 requires libjsoncpp.so.21()(64bit), but none of
the providers can be installed
  - minetest-0.4.17.1-5.fc31.x86_64 does not belong to a distupgrade repository
  - jsoncpp-1.9.1-1.fc31.x86_64 does not belong to a distupgrade repository

 Problem 8: problem with installed package pdf-stapler-0.3.3-15.fc31.noarch
  - package pdf-stapler-1.0.0-0.3.20191215git8753251.fc32.noarch requires
python3-staplelib = 1.0.0-0.3.20191215git8753251.fc32, but none of the providers can be
installed
  - pdf-stapler-0.3.3-15.fc31.noarch does not belong to a distupgrade repository
  - nothing provides (python3.8dist(more-itertools) >= 2.2 with
python3.8dist(more-itertools) < 6) needed by
python3-staplelib-1.0.0-0.3.20191215git8753251.fc32.noarch

Maybe some issue with autogenerated requires?
python3-more-itertools-0:7.2.0-4.fc32.noarch
is available in F32.

 Problem 9: problem with installed package python3-fsleyes-0.32.2-1.fc31.noarch
  - package python3-fsleyes-0.32.2-1.fc32.noarch requires python3.8dist(fsleyes-props)
>= 1.6.7, but none of the providers can be installed
  - python3-fsleyes-0.32.2-1.fc31.noarch does not belong to a distupgrade repository
  - nothing provides python3.8dist(flseyes-widgets) >= 0.6 needed by
python3-fsleyes-props-1.6.7-3.fc32.noarch
 Problem 10: problem with installed package texlive-stix-9:svn47652-15.fc31.noarch
  - package texlive-stix-9:svn47652-18.fc32.noarch requires stix-math-fonts, but none of
the providers can be installed
  - texlive-stix-9:svn47652-15.fc31.noarch does not belong to a distupgrade repository
  - stix-math-fonts-1.1.0-15.fc31.noarch does not belong to a distupgrade repository
 Problem 11: cannot install both jsoncpp-1.9.2-2.fc32.x86_64 and
jsoncpp-1.9.1-1.fc31.x86_64
  - package minetest-server-5.1.0-1.fc32.x86_64 requires libjsoncpp.so.21()(64bit), but
none of the providers can be installed
  - package cmake-3.16.4-1.fc32.x86_64 requires libjsoncpp.so.22()(64bit), but none of the
providers can be installed
  - problem with installed package minetest-server-0.4.17.1-5.fc31.x86_64
  - problem with installed package cmake-3.16.4-1.fc31.x86_64
  - minetest-server-0.4.17.1-5.fc31.x86_64 does not belong to a distupgrade repository
  - cmake-3.16.4-1.fc31.x86_64 does not belong to a distupgrade repository

[Zbigniew Jędrzejewski-Szmek]

On Fri, Mar 06, 2020 at 03:09:05PM +0000, Zbigniew Jędrzejewski-Szmek wrote:
>   Problem 4: package docker-2:1.13.1-68.git47e2230.fc30.x86_64
> requires atomic-registries >= 1.19.1-6, but none of the providers can be installed
>    - atomic-registries-1.22.1-28.gitb507039.fc30.x86_64 does not belong to a distupgrade
> repository
>    - problem with installed package docker-2:1.13.1-68.git47e2230.fc30.x86_64
>  Hmmm. 
Oh, I see that this is https://bugzilla.redhat.com/show_bug.cgi?id=1804305.

Zbyszek

[Jerry James]

On Wed, Mar 4, 2020 at 9:07 AM José Abílio Matos <jamatos(a)fc.up.pt&gt; wrote:
>   Problem 7: package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64
> requires jacop,
>  but none of the providers can be installed
>    - problem with installed package mp-3.1.0-23.20161124git1f39801.fc31.x86_64
>    - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
>  compiler), but none of the providers can be installed
>    - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
>  library), but none of the providers can be installed
>    - mp-3.1.0-23.20161124git1f39801.fc31.x86_64 does not belong to a
>  distupgrade repository
>    - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering
>   Problem 8: package coin-or-Cbc-2.10.4-1.fc32.x86_64 requires libasl.so.3()
>  (64bit), but none of the providers can be installed
>    - package mp-3.1.0-26.20200215git71c21a5.fc32.x86_64 requires jacop, but
>  none of the providers can be installed
>    - package mp-3.1.0-23.20161124git1f39801.fc31.x86_64 requires libgsl.so.23()
>  (64bit), but none of the providers can be installed
>    - problem with installed package coin-or-Cbc-2.10.3-2.fc31.x86_64
>    - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
>  compiler), but none of the providers can be installed
>    - package jacop-4.7-1.fc32.noarch requires mvn(org.scala-lang:scala-
>  library), but none of the providers can be installed
>    - gsl-2.5-2.fc31.x86_64 does not belong to a distupgrade repository
>    - coin-or-Cbc-2.10.3-2.fc31.x86_64 does not belong to a distupgrade
>  repository
>    - package scala-2.10.6-17.fc32.noarch is filtered out by modular filtering 
This looks like yet another problem with modules.  With no modules
involved, this update works just fine.  You can install scala, jacop,
mp, and the coin-or packages in an F32 mock chroot, for example.  But
somehow modules are preventing scala from being installed or updated.
-- 
Jerry James
http://www.jamezone.org/

[Artem Tim]

Have many dupes which was already reported there, so selectively:

 Problem 4: problem with installed package
minetest-5.1.0-1.module_f31+7240+cacc2d7d.x86_64
  - package minetest-5.1.0-1.fc32.x86_64 requires libjsoncpp.so.21()(64bit), but none of
the providers can be installed
  - minetest-5.1.0-1.module_f31+7240+cacc2d7d.x86_64 does not belong to a distupgrade
repository
  - jsoncpp-1.9.1-1.fc31.x86_64 does not belong to a distupgrade repository
 Problem 6: package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) =
3.7.6-2.fc31, but none of the providers can be installed
  - package ulauncher-5.6.1-4.fc31.noarch requires python(abi) = 3.7, but none of the
providers can be installed
  - python3-libs-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package ulauncher-5.6.1-4.fc31.noarch
 Problem 7: package cheese-2:3.34.0-3.fc32.x86_64 requires
libgnome-desktop-3.so.19()(64bit), but none of the providers can be installed
  - cannot install both gnome-desktop3-3.35.91-1.fc32.x86_64 and
gnome-desktop3-3.34.4-1.fc31.x86_64
  - problem with installed package cheese-2:3.34.0-1.fc31.x86_64
  - package gnome-panel-3.34.1-3.fc31.x86_64 requires libgnome-desktop-3.so.18()(64bit),
but none of the providers can be installed
  - cheese-2:3.34.0-1.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package gnome-panel-3.34.1-3.fc31.x86_64
 Problem 8: cannot install both gnome-desktop3-3.35.91-1.fc32.x86_64 and
gnome-desktop3-3.34.4-1.fc31.x86_64
  - package evince-3.35.92-1.fc32.x86_64 requires libgnome-desktop-3.so.19()(64bit), but
none of the providers can be installed
  - package gnome-panel-3.34.1-3.fc31.x86_64 requires libgnome-desktop-3.so.18()(64bit),
but none of the providers can be installed
  - problem with installed package evince-3.34.2-1.fc31.x86_64
  - package gnome-applets-1:3.34.0-2.fc31.x86_64 requires gnome-panel >= 3.24.1, but
none of the providers can be installed
  - evince-3.34.2-1.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package gnome-applets-1:3.34.0-2.fc31.x86_64
 Problem 9: cannot install both jsoncpp-1.9.2-2.fc32.x86_64 and
jsoncpp-1.9.1-1.fc31.x86_64
  - package vtk-8.2.0-12.fc32.x86_64 requires libjsoncpp.so.22()(64bit), but none of the
providers can be installed
  - package minetest-server-5.1.0-1.fc32.x86_64 requires libjsoncpp.so.21()(64bit), but
none of the providers can be installed
  - problem with installed package vtk-8.2.0-6.fc31.x86_64
  - problem with installed package
minetest-server-5.1.0-1.module_f31+7240+cacc2d7d.x86_64
  - vtk-8.2.0-6.fc31.x86_64 does not belong to a distupgrade repository
  - minetest-server-5.1.0-1.module_f31+7240+cacc2d7d.x86_64 does not belong to a
distupgrade repository


Filed a bug: https://bugzilla.redhat.com/show_bug.cgi?id=1811103

BTW already upgraded successfully form F31 to F32.

[Ankur Sinha]

On Fri, Mar 06, 2020 15:09:05 +0000, Zbigniew Jędrzejewski-Szmek wrote:
>   Problem 3: problem with installed package
> python3-fsleyes-props-1.6.7-1.fc31.noarch
>    - python3-fsleyes-props-1.6.7-1.fc31.noarch does not belong to a distupgrade
> repository
>    - nothing provides python3.8dist(flseyes-widgets) >= 0.6 needed by
> python3-fsleyes-props-1.6.7-3.fc32.noarch 
>   Problem 9: problem with installed package
> python3-fsleyes-0.32.2-1.fc31.noarch
>    - package python3-fsleyes-0.32.2-1.fc32.noarch requires python3.8dist(fsleyes-props)
> >= 1.6.7, but none of the providers can be installed
>    - python3-fsleyes-0.32.2-1.fc31.noarch does not belong to a distupgrade repository
>    - nothing provides python3.8dist(flseyes-widgets) >= 0.6 needed by
> python3-fsleyes-props-1.6.7-3.fc32.noarch 

Hrm. We have:

- python3-fsleyes-0.32.2-1:
  https://koji.fedoraproject.org/koji/buildinfo?buildID=1468660
  https://bodhi.fedoraproject.org/updates/FEDORA-2020-51bf8fc796

- python3-fsleyes-props-1.6.7-3:
  https://koji.fedoraproject.org/koji/buildinfo?buildID=1462642
  https://bodhi.fedoraproject.org/updates/FEDORA-2020-4316570264

- python3-fsleyes-widgets-0.8.4-1:
  https://koji.fedoraproject.org/koji/buildinfo?buildID=1405509
  https://bodhi.fedoraproject.org/updates/FEDORA-2020-4316570264

in Fedora 32. What's wrong here?

-- 
Thanks,
Regards,
Ankur Sinha "FranciscoD" (He / Him / His) |
https://fedoraproject.org/wiki/User:Ankursinha
Time zone: Europe/London

[Kalev Lember]

On Fri, Mar 6, 2020 at 5:21 PM Ankur Sinha <sanjay.ankur(a)gmail.com&gt; wrote:

>  On Fri, Mar 06, 2020 15:09:05 +0000, Zbigniew Jędrzejewski-Szmek
> wrote:
>  >  Problem 3: problem with installed package
>  python3-fsleyes-props-1.6.7-1.fc31.noarch
>  >   - python3-fsleyes-props-1.6.7-1.fc31.noarch does not belong to a
>  distupgrade repository
>  >   - nothing provides python3.8dist(flseyes-widgets) >= 0.6 needed by
>  python3-fsleyes-props-1.6.7-3.fc32.noarch
>  
I think it's "fls" vs "fsl" in python3.8dist(flseyes-widgets)

-- 
Kalev

[Ankur Sinha]

On Fri, Mar 06, 2020 17:25:39 +0100, Kalev Lember wrote:
>  On Fri, Mar 6, 2020 at 5:21 PM Ankur Sinha
> <sanjay.ankur(a)gmail.com&gt; wrote:
>  
>      On Fri, Mar 06, 2020 15:09:05 +0000, Zbigniew Jędrzejewski-Szmek wrote:
>      >  Problem 3: problem with installed package
>      python3-fsleyes-props-1.6.7-1.fc31.noarch
>      >   - python3-fsleyes-props-1.6.7-1.fc31.noarch does not belong to a
>      distupgrade repository
>      >   - nothing provides python3.8dist(flseyes-widgets) >= 0.6 needed by
>      python3-fsleyes-props-1.6.7-3.fc32.noarch
>  
>  
>  I think it's "fls" vs "fsl" in python3.8dist(flseyes-widgets)
Ugh :'(!

Fixed, built, update pushed:
https://bodhi.fedoraproject.org/updates/FEDORA-2020-e92552ccc3

-- 
Thanks,
Regards,
Ankur Sinha "FranciscoD" (He / Him / His) |
https://fedoraproject.org/wiki/User:Ankursinha
Time zone: Europe/London

[jeandet]

Hello, 

I did an upgrade last week, with:
sudo dnf system-upgrade download --refresh --releasever=32
Except for modules everything was ok on my laptop, but I got some
issues on my desktop.
On my laptop, from fc32 running: 
sudo dnf module reset '*'
sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
    --enablerepo=updates-testing --enablerepo=updates-testing-modular \
    distro-sync
did solve the modules warnings.


On my desktop:

"/dev/disk/by-uuid" wasn't and still isn't populated with soft raid
volumes, I had to change fstab to point to /dev/mdXXXpX to mount my
home and other needed folders. From cockpit it also says "Unrecognized
Data" for all my mdraid partitions.

I didn't have time to investigate more, so I jump into this mail to ask
against which package should I report a bug? I have no idea who fills
"/dev/disk/by-uuid".

Best regards,
Alexis.
On Wed, 2020-03-04 at 16:24 +0100, Miroslav Suchý wrote:
>  Do you want to make Fedora 32 better? Please spend 1 minute of your
>  time and try to run:
>  
>    # Run this only if you use default Fedora modules
>    # next time you run any DNF command default modules will be enabled
>  again
>    sudo dnf module reset '*'
>  
>    sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
>      --enablerepo=updates-testing --enablerepo=updates-testing-modular 
>  \
>      distro-sync
>  
>  This command does not replace `dnf system-upgrade`, but it will
>  reveal potential problems. You may also run `dnf
>  upgrade` before running this command.
>  
>  
>  If you get this prompt:
>  
>    ...
>    Total download size: XXX M
>    Is this ok [y/N]:
>  
>  you can answer N and nothing happens, no need to test the actual
>  upgrade.
>  
>  But very likely you get some dependency problem now. In that case,
>  please report it against the appropriate package. Or
>  against fedora-obsolete-packages if that package should be removed in
>  Fedora 32. Please check existing reports first:
>  https://red.ht/2kuBDPu
>  
>  Thank you
>  
>  -- 
>  Miroslav Suchy, RHCA
>  Red Hat, Associate Manager ABRT/Copr, #brno, #fedora-buildsys
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct: 
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: 
>  https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives: 
>  https://lists.fedoraproject.org/archives/list/[e-mail]

[Adam Williamson]

On Fri, 2020-03-06 at 18:07 +0100, jeandet wrote:
>  Hello, 
>  
>  I did an upgrade last week, with:
>  sudo dnf system-upgrade download --refresh --releasever=32
>  Except for modules everything was ok on my laptop, but I got some
>  issues on my desktop.
>  On my laptop, from fc32 running: 
>  sudo dnf module reset '*'
>  sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
>      --enablerepo=updates-testing --enablerepo=updates-testing-modular \
>      distro-sync
>  did solve the modules warnings.
>  
>  
>  On my desktop:
>  
>  "/dev/disk/by-uuid" wasn't and still isn't populated with soft raid
>  volumes, I had to change fstab to point to /dev/mdXXXpX to mount my
>  home and other needed folders. From cockpit it also says "Unrecognized
>  Data" for all my mdraid partitions.
>  
>  I didn't have time to investigate more, so I jump into this mail to ask
>  against which package should I report a bug? I have no idea who fills
>  "/dev/disk/by-uuid". 
systemd (well, udev, which is part of systemd these days). It should be
done by /usr/lib/udev/rules.d/60-persistent-storage.rules , which is
part of systemd-udev. I wonder if it's possibly an issue that that runs
before /usr/lib/udev/rules.d/65-md-incremental.rules , but I'm just
guessing there...
-- 
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net

[Chris Murphy]

On Fri, Mar 6, 2020 at 10:48 AM Adam Williamson
<adamwill(a)fedoraproject.org&gt; wrote:
>  On Fri, 2020-03-06 at 18:07 +0100, jeandet wrote:
>  > Hello,
>  >
>  > I did an upgrade last week, with:
>  > sudo dnf system-upgrade download --refresh --releasever=32
>  > Except for modules everything was ok on my laptop, but I got some
>  > issues on my desktop.
>  > On my laptop, from fc32 running:
>  > sudo dnf module reset '*'
>  > sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
>  >     --enablerepo=updates-testing --enablerepo=updates-testing-modular \
>  >     distro-sync
>  > did solve the modules warnings.
>  >
>  >
>  > On my desktop:
>  >
>  > "/dev/disk/by-uuid" wasn't and still isn't populated with soft
> raid
>  > volumes, I had to change fstab to point to /dev/mdXXXpX to mount my
>  > home and other needed folders. From cockpit it also says "Unrecognized
>  > Data" for all my mdraid partitions.
>  >
>  > I didn't have time to investigate more, so I jump into this mail to ask
>  > against which package should I report a bug? I have no idea who fills
>  > "/dev/disk/by-uuid".
>
>  systemd (well, udev, which is part of systemd these days). It should be
>  done by /usr/lib/udev/rules.d/60-persistent-storage.rules , which is
>  part of systemd-udev. I wonder if it's possibly an issue that that runs
>  before /usr/lib/udev/rules.d/65-md-incremental.rules , but I'm just
>  guessing there... 

Maybe related?
https://bugzilla.redhat.com/show_bug.cgi?id=1809117

-- 
Chris Murphy

[jeandet]

On Fri, 2020-03-06 at 10:53 -0700, Chris Murphy wrote:
>  On Fri, Mar 6, 2020 at 10:48 AM Adam Williamson
>  <adamwill(a)fedoraproject.org&gt; wrote:
>  > On Fri, 2020-03-06 at 18:07 +0100, jeandet wrote:
>  > > Hello,
>  > > 
>  > > I did an upgrade last week, with:
>  > > sudo dnf system-upgrade download --refresh --releasever=32
>  > > Except for modules everything was ok on my laptop, but I got some
>  > > issues on my desktop.
>  > > On my laptop, from fc32 running:
>  > > sudo dnf module reset '*'
>  > > sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 
>  > > \
>  > >     --enablerepo=updates-testing --enablerepo=updates-testing-
>  > > modular \
>  > >     distro-sync
>  > > did solve the modules warnings.
>  > > 
>  > > 
>  > > On my desktop:
>  > > 
>  > > "/dev/disk/by-uuid" wasn't and still isn't populated with
> soft
>  > > raid
>  > > volumes, I had to change fstab to point to /dev/mdXXXpX to mount
>  > > my
>  > > home and other needed folders. From cockpit it also says
>  > > "Unrecognized
>  > > Data" for all my mdraid partitions.
>  > > 
>  > > I didn't have time to investigate more, so I jump into this mail
>  > > to ask
>  > > against which package should I report a bug? I have no idea who
>  > > fills
>  > > "/dev/disk/by-uuid".
>  > 
>  > systemd (well, udev, which is part of systemd these days). It
>  > should be
>  > done by /usr/lib/udev/rules.d/60-persistent-storage.rules , which
>  > is
>  > part of systemd-udev. I wonder if it's possibly an issue that that
>  > runs
>  > before /usr/lib/udev/rules.d/65-md-incremental.rules , but I'm just
>  > guessing there... 
Thank you, I made a bug repport.
>  
>  Maybe related?
>  https://bugzilla.redhat.com/show_bug.cgi?id=1809117 
Yes, thank you.
>  
>  -- 
>  Chris Murphy
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct: 
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: 
>  https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives: 
>  https://lists.fedoraproject.org/archives/list/[e-mail]

[Nicolas Mailhot]

BTW my local servlet, which is on F33, lost automounting of lvm on
mdraid home

Makes systemd unit crazy, it forgets about user units, and refuses to
acknowledge them even after /home is remounted manually.

(this may or may not be the same thing, F32 & 33 have not diverged too
far yet)

-- 
Nicolas Mailhot

[Adam Williamson]

On Fri, 2020-03-06 at 09:47 -0800, Adam Williamson wrote:
>  On Fri, 2020-03-06 at 18:07 +0100, jeandet wrote:
>  > Hello, 
>  > 
>  > I did an upgrade last week, with:
>  > sudo dnf system-upgrade download --refresh --releasever=32
>  > Except for modules everything was ok on my laptop, but I got some
>  > issues on my desktop.
>  > On my laptop, from fc32 running: 
>  > sudo dnf module reset '*'
>  > sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
>  >     --enablerepo=updates-testing --enablerepo=updates-testing-modular \
>  >     distro-sync
>  > did solve the modules warnings.
>  > 
>  > 
>  > On my desktop:
>  > 
>  > "/dev/disk/by-uuid" wasn't and still isn't populated with soft
> raid
>  > volumes, I had to change fstab to point to /dev/mdXXXpX to mount my
>  > home and other needed folders. From cockpit it also says "Unrecognized
>  > Data" for all my mdraid partitions.
>  > 
>  > I didn't have time to investigate more, so I jump into this mail to ask
>  > against which package should I report a bug? I have no idea who fills
>  > "/dev/disk/by-uuid".
>  
>  systemd (well, udev, which is part of systemd these days). It should be
>  done by /usr/lib/udev/rules.d/60-persistent-storage.rules , which is
>  part of systemd-udev. I wonder if it's possibly an issue that that runs
>  before /usr/lib/udev/rules.d/65-md-incremental.rules , but I'm just
>  guessing there... 
Aha, I think I found your bug:

https://bugzilla.redhat.com/show_bug.cgi?id=1809117

that's probably what you're hitting.
-- 
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net
http://www.happyassassin.net

[Ankur Sinha]

Hi,

So, I went ahead and actually did the upgrade on three different
systems: two workstation installs and a server install. I'm happy to
report that the upgrade went through without any issues.

On F32, I seem to be hitting a qt-webengine bug, though. Abrt reported
it here:
https://bugzilla.redhat.com/show_bug.cgi?id=1812482


-- 
Thanks,
Regards,
Ankur Sinha "FranciscoD" (He / Him / His) |
https://fedoraproject.org/wiki/User:Ankursinha
Time zone: Europe/London

[Carlos "casep" Sepulveda]

On Wed, 4 Mar 2020 at 15:26, Miroslav Suchý <msuchy(a)redhat.com&gt; wrote:
>  Do you want to make Fedora 32 better? Please spend 1 minute of your time and try to run:
>
>    # Run this only if you use default Fedora modules
>    # next time you run any DNF command default modules will be enabled again
>    sudo dnf module reset '*'
>
>    sudo dnf --releasever=32 --setopt=module_platform_id=platform:f32 \
>      --enablerepo=updates-testing --enablerepo=updates-testing-modular \
>      distro-sync
>
>  This command does not replace `dnf system-upgrade`, but it will reveal potential
> problems. You may also run `dnf
>  upgrade` before running this command.
>  
3 errors

Error:
 Problem 1: package VirtualBox-6.1-6.1.4_136177_fedora31-1.x86_64
requires python(abi) = 3.7, but none of the providers can be installed
  - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package VirtualBox-6.1-6.1.4_136177_fedora31-1.x86_64
 Problem 2: package blueproximity-1.2.5-20.fc29.noarch requires
pybluez, but none of the providers can be installed
  - pybluez-0.22-14.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package blueproximity-1.2.5-20.fc29.noarch
 Problem 3: problem with installed package
gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64
  - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires
libmypaint-1.3.so.0()(64bit), but none of the providers can be
installed
  - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository
  - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong
to a distupgrade repository

Not entirely sure on how to file the bugs

Cheers,
Carlos

-- 
"Never, never, in nothing great or small, large or petty, never give
in except to convictions of honour and good sense. Never yield to
force; never yield to the apparently overwhelming might of the
enemy.''
Winston Churchill
https://stackoverflow.com/users/3670118/casep

[José Abílio Matos]

On Thursday, 12 March 2020 09.03.38 WET Carlos "casep" Sepulveda wrote:
>  Error:
>   Problem 1: package VirtualBox-6.1-6.1.4_136177_fedora31-1.x86_64
>  requires python(abi) = 3.7, but none of the providers can be installed
>    - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
>    - problem with installed package
>  VirtualBox-6.1-6.1.4_136177_fedora31-1.x86_64 Problem 2: package
>  blueproximity-1.2.5-20.fc29.noarch requires
>  pybluez, but none of the providers can be installed
>    - pybluez-0.22-14.fc31.x86_64 does not belong to a distupgrade repository
>    - problem with installed package blueproximity-1.2.5-20.fc29.noarch
>   Problem 3: problem with installed package
>  gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64
>    - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires
>  libmypaint-1.3.so.0()(64bit), but none of the providers can be
>  installed
>    - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade
>  repository - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not
>  belong to a distupgrade repository
>  
>  Not entirely sure on how to file the bugs 
Did you reset the modules?

sudo dnf module reset '*'

I am asking because I forgot the first time I ran the command. :-)

-- 
José Abílio

[Zbigniew Jędrzejewski-Szmek]

On Thu, Mar 12, 2020 at 09:22:45AM +0000, José Abílio Matos wrote:
>  On Thursday, 12 March 2020 09.03.38 WET Carlos "casep"
> Sepulveda wrote:
>  > Error:
>  >  Problem 1: package VirtualBox-6.1-6.1.4_136177_fedora31-1.x86_64
>  > requires python(abi) = 3.7, but none of the providers can be installed
>  >   - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
>  >   - problem with installed package 
That's not a Fedora package... You might need to remove it temporarily.

>  Problem 2: package
>  > blueproximity-1.2.5-20.fc29.noarch requires
>  > pybluez, but none of the providers can be installed
>  >   - pybluez-0.22-14.fc31.x86_64 does not belong to a distupgrade repository
>  >   - problem with installed package blueproximity-1.2.5-20.fc29.noarch 
I added blueproximity to fedora-obsolete-packages now for F32 and rawhide.

>  >  Problem 3: problem with installed package
>  > gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64
>  >   - package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires
>  > libmypaint-1.3.so.0()(64bit), but none of the providers can be
>  > installed
>  >   - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade
>  > repository - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not
>  > belong to a distupgrade repository
>  > 
>  > Not entirely sure on how to file the bugs
>  
>  Did you reset the modules?
>  
>  sudo dnf module reset '*' 
Yeah, that should solve the gimp problem.

Zbyszek

[Antonio Romito]

 Problem: conflicting requests
  - nothing provides module(platform:f31) needed by module
libgit2:0.27:3120190407181414:f636be4b-0.x86_64
Error: 
 Problem 1: package python2-matplotlib-2.2.5-1.fc31.x86_64 requires
python2-backports-functools_lru_cache, but none of the providers can be installed
  - package python2-matplotlib-2.2.5-1.fc31.x86_64 requires
python2.7dist(backports.functools-lru-cache), but none of the providers can be installed
  - python2-backports-functools_lru_cache-1.5-6.fc31.noarch does not belong to a
distupgrade repository
  - problem with installed package python2-matplotlib-2.2.5-1.fc31.x86_64
 Problem 2: package python3-getdevinfo-1.0.5-1.1.noarch requires python(abi) = 3.7, but
none of the providers can be installed
  - python3-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package python3-getdevinfo-1.0.5-1.1.noarch
 Problem 3: package rhsm-api-client-1.0-1.fc29.noarch requires python-futures, but none of
the providers can be installed
  - python2-futures-3.3.0-1.fc31.noarch does not belong to a distupgrade repository
  - problem with installed package rhsm-api-client-1.0-1.fc29.noarch
 Problem 4: package gimp-2:2.10.14-1.module_f32+6980+20383b7e.x86_64 requires
libmypaint-1.3.so.0()(64bit), but none of the providers can be installed
  - problem with installed package gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64
  - libmypaint-1.4.0-1.fc31.x86_64 does not belong to a distupgrade repository
  - gimp-2:2.10.14-1.module_f31+6993+669d73be.x86_64 does not belong to a distupgrade
repository
 Problem 5: package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2-cycler >=
0.10.0, but none of the providers can be installed
  - package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2.7dist(cycler) >=
0.10, but none of the providers can be installed
  - package python2-matplotlib-tk-2.2.5-1.fc31.x86_64 requires python2-matplotlib(x86-64)
= 2.2.5-1.fc31, but none of the providers can be installed
  - python2-cycler-0.10.0-10.fc31.noarch does not belong to a distupgrade repository
  - problem with installed package python2-matplotlib-tk-2.2.5-1.fc31.x86_64
 Problem 6: package python3-getdevinfo-1.0.5-1.1.noarch requires python(abi) = 3.7, but
none of the providers can be installed
  - package python3-3.7.6-2.fc31.x86_64 requires python3-libs(x86-64) = 3.7.6-2.fc31, but
none of the providers can be installed
  - package ddrescue-gui-2.0.2-1.1.noarch requires python3-getdevinfo, but none of the
providers can be installed
  - python3-libs-3.7.6-2.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package ddrescue-gui-2.0.2-1.1.noarch
(try to add '--skip-broken' to skip uninstallable packages)

[Dominik 'Rathann' Mierzejewski]

On Wednesday, 04 March 2020 at 17:23, Artur Iwicki wrote:
>  On my second machine:
>  
>  Problem with installed package mkvtoolnix-gui-41.0.0-1.fc31.x86_64
>    - package mkvtoolnix-gui-41.0.0-2.fc32.x86_64 requires libcmark.so.0.28.3()(64bit), but
> none of the providers can be installed
>    - mkvtoolnix-gui-41.0.0-1.fc31.x86_64 does not belong to a distupgrade repository
>    - cmark-lib-0.28.3-6.fc31.x86_64 does not belong to a distupgrade repository 
This is due to cmark bumping SONAME. I'm on it.

Regards,
Dominik
-- 
Fedora   https://getfedora.org  |  RPM Fusion  http://rpmfusion.org
There should be a science of discontent. People need hard times and
oppression to develop psychic muscles.
        -- from "Collected Sayings of Muad'Dib" by the Princess Irulan

I'm on Fedora 32 Beta now:

1. Took a few hours
2. Some Error message packed from Modular Repo
3. Other Packed Problem

About it these steps before with the following command:

sudo dnf system-upgrade download --releasever=32 --skip-broken --best
--allowerasing

All working now

See my first post:

https://lists.fedoraproject.org/archives/list/[e-mail].o...

Regards and as usual _Nice Works_ again thx

[Jérémy Bertozzi]

$ sudo dnf system-upgrade download --releasever=32


Before you continue ensure that your system is fully upgraded by running
"dnf --refresh upgrade". Do you want to continue [y/N]: y

Adobe Systems Incorporated

       7.0 kB/s | 2.9 kB     00:00
Fedora 32 openh264 (From Cisco) - x86_64

       4.8 kB/s | 3.0 kB     00:00
Fedora Modular 32 - x86_64

        26 kB/s |  19 kB     00:00
Fedora Modular 32 - x86_64 - Updates

        28 kB/s |  22 kB     00:00
Fedora 32 - x86_64 - Updates

        28 kB/s |  22 kB     00:00
Fedora 32 - x86_64

        68 kB/s |  19 kB     00:00
Copr repo for gnome-shell-extensions owned by jbertozzi

      1.4 kB/s | 3.3 kB     00:02
RPM Fusion for Fedora 32 - Nonfree - Updates

        29 kB/s | 9.3 kB     00:00
RPM Fusion for Fedora 32 - Nonfree

        34 kB/s |  10 kB     00:00
teams

       12 kB/s | 2.9 kB     00:00
Error:


 Problem 1: package pulseaudio-module-bluetooth-freeworld-1.3-1.fc31.x86_64
requires libpulsecore-13.0.so()(64bit), but none of the providers can be
installed
  - pulseaudio-13.0-2.fc31.x86_64 does not belong to a distupgrade
repository

  - problem with installed package
pulseaudio-module-bluetooth-freeworld-1.3-1.fc31.x86_64


 Problem 2: package rpmfusion-free-release-31-1.noarch requires
system-release(31), but none of the providers can be installed

  - fedora-release-31-2.noarch does not belong to a distupgrade repository


  - problem with installed package rpmfusion-free-release-31-1.noarch


(try to add '--skip-broken' to skip uninstallable packages)


On Tue, Mar 17, 2020 at 6:37 PM <louzaoh(a)gmail.com&gt; wrote:

>  I'm on Fedora 32 Beta now:
>
>  1. Took a few hours
>  2. Some Error message packed from Modular Repo
>  3. Other Packed Problem
>
>  About it these steps before with the following command:
>
>  sudo dnf system-upgrade download --releasever=32 --skip-broken --best
>  --allowerasing
>
>  All working now
>
>  See my first post:
>
>
>
> https://lists.fedoraproject.org/archives/list/[e-mail].o...
>
>  Regards and as usual _Nice Works_ again thx
>  _______________________________________________
>  devel mailing list -- devel(a)lists.fedoraproject.org
>  To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct:
>  https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
>  https://lists.fedoraproject.org/archives/list/[e-mail]
>

[Solomon Peachy]

Trying to do a F31->F32 beta upgrade on my primary laptop:

[...]
Running transaction test
The downloaded packages were saved in cache until the next successful transaction.
You can remove cached packages by executing 'dnf clean packages'.
Error: Transaction test error:
  file /usr/share/widelands/i18n/fonts/DejaVu from install of
widelands-0-0.76.build20.fc32.x86_64 conflicts with file from package
widelands-0-0.72.build20.fc31.x86_64
  file /usr/share/fonts/dejavu/DejaVuSans-Bold.ttf conflicts between attempted installs of
compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and widelands-0-0.76.build20.fc32.x86_64
  file /usr/share/fonts/dejavu/DejaVuSans-BoldOblique.ttf conflicts between attempted
installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and
widelands-0-0.76.build20.fc32.x86_64
  file /usr/share/fonts/dejavu/DejaVuSans-ExtraLight.ttf conflicts between attempted
installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and
widelands-0-0.76.build20.fc32.x86_64
  [...and many many more font conflicts]

...Why is the 'widelands' package bundling fonts?

 - Solomon

 - Solomon
-- 
Solomon Peachy			       pizza at shaftnet dot org
High Springs, FL                          ^^ (email/xmpp) ^^
Quidquid latine dictum sit, altum videtur.

[Samuel Sieb]

On 3/18/20 5:14 PM, Solomon Peachy wrote:
>  Error: Transaction test error: 
There appears to be a packaging change causing this problem.

>     file /usr/share/widelands/i18n/fonts/DejaVu from install of
> widelands-0-0.76.build20.fc32.x86_64 conflicts with file from package
> widelands-0-0.72.build20.fc31.x86_64 
In the F31 version, /usr/share/widelands/i18n/fonts/DejaVu is a link to 
the system fonts directory.  In the F32 version, somehow it has become a 
real directory with font files in it.

>     file /usr/share/fonts/dejavu/DejaVuSans-Bold.ttf conflicts between
> attempted installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and
> widelands-0-0.76.build20.fc32.x86_64
>     file /usr/share/fonts/dejavu/DejaVuSans-BoldOblique.ttf conflicts between attempted
> installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and
> widelands-0-0.76.build20.fc32.x86_64
>     file /usr/share/fonts/dejavu/DejaVuSans-ExtraLight.ttf conflicts between attempted
> installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and
> widelands-0-0.76.build20.fc32.x86_64 
Since rpm can't replace the symlink, it's now trying to install the 
included files into the system fonts directory instead of in the 
widelands one.

>  ...Why is the 'widelands' package bundling fonts? 
Given that they're in an i18n directory, I assume it's trying make sure 
it has sufficient font coverage for different languages.  Also, the 
widelands special font is in there as well.  I don't see why they 
couldn't be split out though.

[Fabio Valentini]

On Thu, Mar 19, 2020 at 5:48 AM Samuel Sieb <samuel(a)sieb.net&gt; wrote:
>  On 3/18/20 5:14 PM, Solomon Peachy wrote:
>  > Error: Transaction test error:
>
>  There appears to be a packaging change causing this problem.
>
>  >    file /usr/share/widelands/i18n/fonts/DejaVu from install of
> widelands-0-0.76.build20.fc32.x86_64 conflicts with file from package
> widelands-0-0.72.build20.fc31.x86_64
>
>  In the F31 version, /usr/share/widelands/i18n/fonts/DejaVu is a link to
>  the system fonts directory.  In the F32 version, somehow it has become a
>  real directory with font files in it. 
This looks like a bug in the dejavu-fonts package. Please either chime
in in the bug about the incompatible packaging changes [0] or open a
new one.

[0]: https://bugzilla.redhat.com/show_bug.cgi?id=1806272

Fabio

> >    file /usr/share/fonts/dejavu/DejaVuSans-Bold.ttf conflicts between attempted
installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and
widelands-0-0.76.build20.fc32.x86_64
> >    file /usr/share/fonts/dejavu/DejaVuSans-BoldOblique.ttf conflicts between
attempted installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and
widelands-0-0.76.build20.fc32.x86_64
> >    file /usr/share/fonts/dejavu/DejaVuSans-ExtraLight.ttf conflicts between
attempted installs of compat-f32-dejavu-sans-fonts-2.37-7.fc32.noarch and
widelands-0-0.76.build20.fc32.x86_64
>
> Since rpm can't replace the symlink, it's now trying to install the
> included files into the system fonts directory instead of in the
> widelands one.
>
> > ...Why is the 'widelands' package bundling fonts?
>
> Given that they're in an i18n directory, I assume it's trying make sure
> it has sufficient font coverage for different languages.  Also, the
> widelands special font is in there as well.  I don't see why they
> couldn't be split out though.
> _______________________________________________
> devel mailing list -- devel(a)lists.fedoraproject.org
> To unsubscribe send an email to devel-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
https://lists.fedoraproject.org/archives/list/[e-mail]

[Solomon Peachy]

On Wed, Mar 04, 2020 at 02:33:02PM -0500, Solomon Peachy wrote:
>  > ***** Workstation 3 (a frankenstein beast and a lot of modular
> errors)
>  
>  With 'dnf module reset' this is a lot cleaner.  dispcalGUI was snagged 
>  from OBS, so not a fedora problem. 
Tried to upgrade this workstation from F31 to F32 beta.  The old errors did 
not show up, but now I'm getting these new ones:

Error: 
 Problem 1: package python2-matplotlib-2.2.5-1.fc31.x86_64 requires
python2-backports-functools_lru_cache, but none of the providers can be installed
  - package python2-matplotlib-2.2.5-1.fc31.x86_64 requires
python2.7dist(backports.functools-lru-cache), but none of the providers can be installed
  - python2-backports-functools_lru_cache-1.5-6.fc31.noarch does not belong to a
distupgrade repository
  - problem with installed package python2-matplotlib-2.2.5-1.fc31.x86_64
 Problem 2: package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2-cycler >=
0.10.0, but none of the providers can be installed
  - package python2-matplotlib-2.2.5-1.fc31.x86_64 requires python2.7dist(cycler) >=
0.10, but none of the providers can be installed
  - package python2-matplotlib-tk-2.2.5-1.fc31.x86_64 requires python2-matplotlib(x86-64)
= 2.2.5-1.fc31, but none of the providers can be installed
  - python2-cycler-0.10.0-10.fc31.noarch does not belong to a distupgrade repository
  - problem with installed package python2-matplotlib-tk-2.2.5-1.fc31.x86_64

I nuked python2-matplotlib and python2-matplotlib-tk, and it was able to 
proceed.  One thing that looked odd is that it's downgrading a bunch of 
packages, including the kernel:

 kernel-tools                    x86_64 5.5.0-0.rc6.git0.1.fc32  fedora   190 k       
 kernel-tools-libs               x86_64 5.5.0-0.rc6.git0.1.fc32  fedora    21 k       
 kernel-tools-libs-devel         x86_64 5.5.0-0.rc6.git0.1.fc32  fedora    14 k  

I wonder if I'm hitting an out-of-date mirror?  The other system I just 
updated had a 5.6.0-0.rc kernel out of the gate..

 - Solomon
-- 
Solomon Peachy			       pizza at shaftnet dot org
High Springs, FL                          ^^ (email/xmpp) ^^
Quidquid latine dictum sit, altum videtur.

[Samuel Sieb]

On 3/19/20 6:59 PM, Solomon Peachy wrote:
>  I nuked python2-matplotlib and python2-matplotlib-tk, and it was able
> to
>  proceed.  One thing that looked odd is that it's downgrading a bunch of
>  packages, including the kernel:
>  
>    kernel-tools                    x86_64 5.5.0-0.rc6.git0.1.fc32  fedora   190 k
>    kernel-tools-libs               x86_64 5.5.0-0.rc6.git0.1.fc32  fedora    21 k
>    kernel-tools-libs-devel         x86_64 5.5.0-0.rc6.git0.1.fc32  fedora    14 k
>  
>  I wonder if I'm hitting an out-of-date mirror?  The other system I just
>  updated had a 5.6.0-0.rc kernel out of the gate.. 
Downgrading is pretty common as the new release is frozen so new updates 
only go to the old releases.  Although, if the other system you're 
referring to was an update to F32 beta and not an F31 update, then it 
probably was an out of date mirror.

[Dan Horák]

results from my upgrade attempt today

Chyba: 
 Problém 1: problem with installed package hgview-1.13.0-1.fc31.noarch
  - hgview-1.13.0-1.fc31.noarch does not belong to a distupgrade repository
  - nothing provides python3-qscintilla needed by hgview-1.13.1-1.fc32.noarch

 Problém 3: package python2-qpid-proton-0.30.0-1.fc31.x86_64 requires
qpid-proton-c(x86-64) = 0.30.0-1.fc31, but none of the providers can be installed
  - qpid-proton-c-0.30.0-1.fc31.x86_64 does not belong to a distupgrade repository
  - problem with installed package python2-qpid-proton-0.30.0-1.fc31.x86_64



		Dan

[Miro Hrončok]

On 26. 03. 20 11:13, Dan Horák wrote:
>  results from my upgrade attempt today
>  
>  Chyba:
>    Problém 1: problem with installed package hgview-1.13.0-1.fc31.noarch
>     - hgview-1.13.0-1.fc31.noarch does not belong to a distupgrade repository
>     - nothing provides python3-qscintilla needed by hgview-1.13.1-1.fc32.noarch 
This seem like a problem in hgview. It has broken deps:

$ mock -r fedora-32-x86_64 install hgview
Error:
  Problem: conflicting requests
   - nothing provides python3-qscintilla needed by hgview-1.13.1-1.fc32.noarch

Please report this as a bug to hgview.

>    Problém 3: package python2-qpid-proton-0.30.0-1.fc31.x86_64
> requires qpid-proton-c(x86-64) = 0.30.0-1.fc31, but none of the providers can be
> installed
>     - qpid-proton-c-0.30.0-1.fc31.x86_64 does not belong to a distupgrade repository
>     - problem with installed package python2-qpid-proton-0.30.0-1.fc31.x86_64 
The version needs to be updated in fedora-obsolete-packages:

$ repoquery --repo={fedora,updates{,-testing}} --releasever 32 --latest=1 
--obsoletes fedora-obsolete-packages | grep python2-qpid-proton
python2-qpid-proton < 0.29.0-2

I will do that.

-- 
Miro Hrončok
--
Phone: [phone]
IRC: mhroncok