[SO-NAME BUMP] libjson-c.so.4 comes to fc28 and Rawhide

[Björn 'besser82' Esser]

Hello folks,

I'll update json-c to v0.13.1 for fc28 and Rawhide.  This will bump
libjson-c so-name from 3 to 4 without any changes to the API.  The bump
was done, because some distributions already bumped the so-name to 3
with json-c v0.12 on their own.

I'll bump and rebuild all affected packages in one run.  There are no
adjustments nor patches needed.

There might be some general fallout for builds of many packages in
Rawhide for a few minutes;  see `Circular dependencies` for the
reason.

I don't see any big complications during the rebuild as v0.13.1 just
brings the set of patches I already carried downstream in the present
v0.13 builds.

As soon as the builds are done, I'll give a short update of the status.

Cheers,
  Björn


=== Circular dependencies ===

Since we have a circular dependency in rebuilding cryptsetup (and many
other packages having direct or indirect (systemd !!!) BuildRequires on
that package, I'll do the rebuild chains in two passes:

json-c (with a copy of libjson-c.so.3* included) : cryptsetup

and after the rebuilt cryptsetup has landed the build-repos:

json-c (final build, no copy of libjson-c.so.3*) : $other_packages


=== Affected packages (my own packages excluded) ===

abrt
bluez
bti
cryptsetup
device-mapper-multipath
fastd
filezilla
freeradius
fwts
gdal
gdcm
gfal2
girara
gluster-block
lcgdm-dav
libmypaint
libreport
libstorj
libu2f-host
libu2f-server
libverto-jsonrpc
libvmi
mypaint
ndctl
newsbeuter
openhpi
opensips
postgis
riemann-c-client
strongswan
sway
syslog-ng
systemtap
tlog
zmap

[Kalev Lember]

On 03/06/2018 03:10 PM, Björn 'besser82' Esser wrote:
>  Hello folks,
>  
>  I'll update json-c to v0.13.1 for fc28 and Rawhide.  This will bump
>  libjson-c so-name from 3 to 4 without any changes to the API.  The bump
>  was done, because some distributions already bumped the so-name to 3
>  with json-c v0.12 on their own.
>  
>  I'll bump and rebuild all affected packages in one run.  There are no
>  adjustments nor patches needed. 
Can you wait with this until after the F28 beta freeze is lifted? If you
do a large scale soname bump during the freeze it pretty much makes it
impossible to get freeze exception and blocker fixes out to any of the
packages in your rebuild list, as they'd be built against the new soname
and the stable repo has the old soname.

-- 
Kalev

[Björn 'besser82' Esser]

Am Dienstag, den 06.03.2018, 15:18 +0100 schrieb Kalev Lember:
>  On 03/06/2018 03:10 PM, Björn 'besser82' Esser wrote:
>  > Hello folks,
>  > 
>  > I'll update json-c to v0.13.1 for fc28 and Rawhide.  This will bump
>  > libjson-c so-name from 3 to 4 without any changes to the API.  The
>  > bump
>  > was done, because some distributions already bumped the so-name to 3
>  > with json-c v0.12 on their own.
>  > 
>  > I'll bump and rebuild all affected packages in one run.  There are
>  > no
>  > adjustments nor patches needed.
>  
>  Can you wait with this until after the F28 beta freeze is lifted? If
>  you
>  do a large scale soname bump during the freeze it pretty much makes it
>  impossible to get freeze exception and blocker fixes out to any of the
>  packages in your rebuild list, as they'd be built against the new
>  soname
>  and the stable repo has the old soname.
>  
>  -- 
>  Kalev 

Allright, I'll delay fc28 until the beta-freeze is lifted.  Since this
doesn't affect Rawhide, I'll start with the builds over there in short.

Cheers
  Björn

[Kalev Lember]

On 03/06/2018 03:24 PM, Björn 'besser82' Esser wrote:
>  Am Dienstag, den 06.03.2018, 15:18 +0100 schrieb Kalev Lember:
> > Can you wait with this until after the F28 beta freeze is lifted? If
> > you
> > do a large scale soname bump during the freeze it pretty much makes it
> > impossible to get freeze exception and blocker fixes out to any of the
> > packages in your rebuild list, as they'd be built against the new
> > soname
> > and the stable repo has the old soname.
>  
>  Allright, I'll delay fc28 until the beta-freeze is lifted.  Since this
>  doesn't affect Rawhide, I'll start with the builds over there in short. 
Sounds good to me. Thanks Björn!

-- 
Kalev

[Björn 'besser82' Esser]

Am Dienstag, den 06.03.2018, 15:10 +0100 schrieb Björn 'besser82' Esser:
>  Hello folks,
>  
>  I'll update json-c to v0.13.1 for fc28 and Rawhide.  This will bump
>  libjson-c so-name from 3 to 4 without any changes to the API.  The
>  bump
>  was done, because some distributions already bumped the so-name to 3
>  with json-c v0.12 on their own.
>  
>  I'll bump and rebuild all affected packages in one run.  There are no
>  adjustments nor patches needed.
>  
>  There might be some general fallout for builds of many packages in
>  Rawhide for a few minutes;  see `Circular dependencies` for the
>  reason.
>  
>  I don't see any big complications during the rebuild as v0.13.1 just
>  brings the set of patches I already carried downstream in the present
>  v0.13 builds.
>  
>  As soon as the builds are done, I'll give a short update of the
>  status.
>  
>  Cheers,
>    Björn
>  
>  
>  === Circular dependencies ===
>  
>  Since we have a circular dependency in rebuilding cryptsetup (and many
>  other packages having direct or indirect (systemd !!!) BuildRequires
>  on
>  that package, I'll do the rebuild chains in two passes:
>  
>  json-c (with a copy of libjson-c.so.3* included) : cryptsetup
>  
>  and after the rebuilt cryptsetup has landed the build-repos:
>  
>  json-c (final build, no copy of libjson-c.so.3*) : $other_packages
>  
>  
>  === Affected packages (my own packages excluded) ===
>  
>  abrt
>  bluez
>  bti
>  cryptsetup
>  device-mapper-multipath
>  fastd
>  filezilla
>  freeradius
>  fwts
>  gdal
>  gdcm
>  gfal2
>  girara
>  gluster-block
>  lcgdm-dav
>  libmypaint
>  libreport
>  libstorj
>  libu2f-host
>  libu2f-server
>  libverto-jsonrpc
>  libvmi
>  mypaint
>  ndctl
>  newsbeuter
>  openhpi
>  opensips
>  postgis
>  riemann-c-client
>  strongswan
>  sway
>  syslog-ng
>  systemtap
>  tlog
>  zmap 

=== Rebuild status ===

All packages have been rebuilt successfully, but gluster-block, which is
failing due the SunRPC change in fc28.

As soon as the beta-freeze for fc28 is lifted, I'll start the rebuild
process for fc28 and push an update with all rebuilt packages.

Cheers,
  Björn

[Björn 'besser82' Esser]

Am Donnerstag, den 08.03.2018, 11:48 +0100 schrieb Björn 'besser82'
Esser:
>  Am Dienstag, den 06.03.2018, 15:10 +0100 schrieb Björn
> 'besser82'
>  Esser:
>  > Hello folks,
>  > 
>  > I'll update json-c to v0.13.1 for fc28 and Rawhide.  This will bump
>  > libjson-c so-name from 3 to 4 without any changes to the API.  The
>  > bump
>  > was done, because some distributions already bumped the so-name to 3
>  > with json-c v0.12 on their own.
>  > 
>  > I'll bump and rebuild all affected packages in one run.  There are
>  > no
>  > adjustments nor patches needed.
>  > 
>  > There might be some general fallout for builds of many packages in
>  > Rawhide for a few minutes;  see `Circular dependencies` for the
>  > reason.
>  > 
>  > I don't see any big complications during the rebuild as v0.13.1 just
>  > brings the set of patches I already carried downstream in the
>  > present
>  > v0.13 builds.
>  > 
>  > As soon as the builds are done, I'll give a short update of the
>  > status.
>  > 
>  > Cheers,
>  >   Björn
>  > 
>  > 
>  > === Circular dependencies ===
>  > 
>  > Since we have a circular dependency in rebuilding cryptsetup (and
>  > many
>  > other packages having direct or indirect (systemd !!!) BuildRequires
>  > on
>  > that package, I'll do the rebuild chains in two passes:
>  > 
>  > json-c (with a copy of libjson-c.so.3* included) : cryptsetup
>  > 
>  > and after the rebuilt cryptsetup has landed the build-repos:
>  > 
>  > json-c (final build, no copy of libjson-c.so.3*) : $other_packages
>  > 
>  > 
>  > === Affected packages (my own packages excluded) ===
>  > 
>  > abrt
>  > bluez
>  > bti
>  > cryptsetup
>  > device-mapper-multipath
>  > fastd
>  > filezilla
>  > freeradius
>  > fwts
>  > gdal
>  > gdcm
>  > gfal2
>  > girara
>  > gluster-block
>  > lcgdm-dav
>  > libmypaint
>  > libreport
>  > libstorj
>  > libu2f-host
>  > libu2f-server
>  > libverto-jsonrpc
>  > libvmi
>  > mypaint
>  > ndctl
>  > newsbeuter
>  > openhpi
>  > opensips
>  > postgis
>  > riemann-c-client
>  > strongswan
>  > sway
>  > syslog-ng
>  > systemtap
>  > tlog
>  > zmap
>  
>  
>  === Rebuild status ===
>  
>  All packages have been rebuilt successfully, but gluster-block, which
>  is
>  failing due the SunRPC change in fc28.
>  
>  As soon as the beta-freeze for fc28 is lifted, I'll start the rebuild
>  process for fc28 and push an update with all rebuilt packages.
>  
>  Cheers,
>    Björn 

As the beta-freeze was lifted yesterday, I've prepared an update with
all packages rebuilt [1] for Fedora 28.

Additionally I fixed the FTBFS for gluster-block in the same run.

Test and give karma, please!

Cheers
  Björn


[1]  https://bodhi.fedoraproject.org/updates/FEDORA-2018-a2b3791b2b