commit 6932df72cb9f73c3820a46859571f06af21641e8
Author: Jack Reed <jreed(a)redhat.com>
Date: Mon Dec 3 14:10:57 2012 +1000
Revised Custom Partitioning section/other partitioning edits
en-US/Automatic_Partitioning_common-list-1.xml | 4 +-
en-US/Disk_Partitioning-x86.xml | 51 ++++++++++++--------
...artitioning_Graphical_common-itemizedlist-1.xml | 38 +++++++++++++++
.../Disk_Partitioning_Graphical_common-para-1.xml | 2 +-
.../Disk_Partitioning_Graphical_common-para-2.xml | 2 +-
.../Disk_Partitioning_Graphical_common-para-3.xml | 2 +-
.../Disk_Partitioning_Graphical_common-para-7.xml | 9 ++++
.../Disk_Partitioning_Graphical_common-para-8.xml | 9 ++++
.../Disk_Partitioning_Graphical_common-para-9.xml | 9 ++++
.../Disk_Partitioning_Graphical_x86_ppc-para-1.xml | 2 +-
en-US/Disk_Partitioning_Setup-x86.xml | 2 +-
en-US/Disk_Partitioning_Setup_common-title.xml | 2 +-
en-US/Disk_Partitioning_common-title-1.xml | 2 +-
en-US/File_System_Types-x86.xml | 25 ++++++++++
en-US/images/diskpartitioning/ddmain.png | Bin 35472 -> 52355 bytes
15 files changed, 129 insertions(+), 30 deletions(-)
---
diff --git a/en-US/Automatic_Partitioning_common-list-1.xml
b/en-US/Automatic_Partitioning_common-list-1.xml
index 2bd2d52..1cca27d 100644
--- a/en-US/Automatic_Partitioning_common-list-1.xml
+++ b/en-US/Automatic_Partitioning_common-list-1.xml
@@ -6,7 +6,7 @@
<itemizedlist>
<listitem>
<para>
- <guilabel>Standard Partition</guilabel>
+ <guilabel>Standard Partition</guilabel> (as described in <xref
linkend="ch-partitions-x86" />)
</para>
</listitem>
<listitem>
@@ -16,7 +16,7 @@
</listitem>
<listitem>
<para>
- <guilabel>LVM</guilabel> (Logical Volume Management). Refer to <xref
linkend="sn-partitioning-lvm" /> for more information.
+ <guilabel>LVM</guilabel> (Logical Volume Management, as described in
<xref linkend="sn-partitioning-lvm" />
</para>
</listitem>
</itemizedlist>
diff --git a/en-US/Disk_Partitioning-x86.xml b/en-US/Disk_Partitioning-x86.xml
index 40a036e..ec3ad2c 100644
--- a/en-US/Disk_Partitioning-x86.xml
+++ b/en-US/Disk_Partitioning-x86.xml
@@ -8,18 +8,24 @@
<!-- Partitioning Your System --> <!-- Begin Index terms -->
<xi:include href="Disk_Partitioning_common-indexterm-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<xi:include href="Disk_Partitioning_common-indexterm-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<xi:include href="Disk_Partitioning_common-indexterm-3.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- End Index terms --> <para>
+ <!-- End Index terms --> <!-- <para>
If you chose one of the four automatic partitioning options and did not select
<guilabel>Review</guilabel>, skip ahead to <xref
linkend="s1-pkgselection-x86" />.
- </para>
- <xi:include href="Disk_Partitioning_x86_ppc-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- If you chose one of the automatic partitioning options and selected... -->
<para>
- If you chose to create a custom layout, you must tell the installation program where to
install Fedora. This is done by defining mount points for one or more disk partitions in
which Fedora is installed. You may also need to create and/or delete partitions at this
time.
+ </para> -->
+ <!-- <xi:include href="Disk_Partitioning_x86_ppc-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
+ <!-- If you chose one of the automatic partitioning options and selected... -->
+ <para>
+ If you checked <guilabel>Let me customize the partitioning of the disks
instead</guilabel> and clicked <guibutton>Continue</guibutton> in
<xref linkend="s1-diskpartsetup-x86" />, you will reach the
<guilabel>Manual Partitioning</guilabel> screen.
+ </para>
+ <para>
+ By choosing to create a custom partitioning layout, you must now tell the installation
program where to install Fedora. This is done by defining mount points for one or more
disk partitions in which Fedora is installed. You may also need to create and/or delete
partitions at this time.
</para>
<para>
If you have not yet planned how to set up your partitions, refer to <xref
linkend="ch-partitions-x86" /> and <xref
linkend="s2-diskpartrecommend-x86" />. At a bare minimum, you need an
appropriately-sized root partition, and usually a swap partition appropriate to the amount
of RAM you have on the system.
</para>
<xi:include href="Disk_Partitioning_common-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- The partitioning tool used by the installation program --> <figure
float="0" id="fig-diskpart-ddmain-x86">
+ <!-- The partitioning tool used by the installation program --> <xi:include
href="Disk_Partitioning_Graphical_x86_ppc-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- The partitioning screen offers a graphical representation... -->
<xi:include href="Disk_Partitioning_Graphical_common-para-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- Above the graphical representation of the device... --> <figure
float="0" id="fig-diskpart-ddmain-x86">
<title>Partitioning on x86, AMD64, and Intel 64 Systems</title>
<mediaobject>
<imageobject>
@@ -35,22 +41,25 @@
</mediaobject>
</figure>
- <xi:include href="Disk_Partitioning_Graphical_x86_ppc-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- The partitioning screen offers a graphical representation... -->
<xi:include href="Disk_Partitioning_Graphical_common-para-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Above the graphical representation of the device... --> <xi:include
href="Disk_Partitioning_Graphical_common-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Anaconda displays several details for each device listed --> <para>
- The lower pane contains a list of all drives, logical volumes, and RAID devices to be
used during installation, as specified earlier in the installation process — refer to
<xref linkend="Assign_Storage_Devices-x86" />
+ <xi:include href="Disk_Partitioning_Graphical_common-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- Anaconda displays several details for each device listed -->
<xi:include href="Disk_Partitioning_Graphical_common-para-3.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- To change which drive/s a mount point should be located on -->
<para>
+ At the bottom of the screen, a link will state how many storage devices were selected
in <guilabel>Installation Destination</guilabel> — refer to <xref
linkend="s1-diskpartsetup-x86" />. To specify which will serve as the boot
device, click the link to open the <guilabel>Selected Devices</guilabel>
dialog.
</para>
- <xi:include href="Disk_Partitioning_Graphical_common-para-3.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Devices are grouped by type. --> <xi:include
href="Disk_Partitioning_Graphical_common-para-4.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Using your mouse, click once to highlight a particular field... -->
<xi:include href="Disk_Partitioning_Graphical_common-variablelist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- the name of the device, logical volume, or partition --> <xi:include
href="Disk_Partitioning_Graphical_common-para-5.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Beneath the lower pane are four buttons: --> <xi:include
href="Disk_Partitioning_Graphical_common-para-6.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Select a device or partition by clicking on it --> <xi:include
href="Disk_Partitioning_common-variablelist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Create a new partition, logical volume, or software RAID -->
<xi:include href="Create_Storage-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Create Storage --> <xi:include
href="Adding_Partitions-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Adding Partitions --> <xi:include
href="Create_Software_RAID-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
- <!-- Create Software RAID --> <xi:include
href="Create_LVM-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude"
/>
+ <!-- <xi:include href="Disk_Partitioning_Graphical_common-para-4.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
+ <!-- Using your mouse, click once to highlight a particular field... -->
<!-- <xi:include
href="Disk_Partitioning_Graphical_common-variablelist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
+ <!-- the name of the device, logical volume, or partition --> <!--
<xi:include href="Disk_Partitioning_Graphical_common-para-5.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
+ <!-- Beneath the lower pane are four buttons: --> <!-- <xi:include
href="Disk_Partitioning_Graphical_common-para-6.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
+ <!-- Select a device or partition by clicking on it --> <!--
<xi:include href="Disk_Partitioning_common-variablelist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
+ <!-- Create a new partition, logical volume, or software RAID --> <!--
<xi:include href="Create_Storage-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
+ <!-- Create Storage --> <!-- <xi:include
href="Adding_Partitions-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
+ <!-- Adding Partitions --> <xi:include
href="Disk_Partitioning_Graphical_common-para-7.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- To customize a partition --> <xi:include
href="Disk_Partitioning_Graphical_common-itemizedlist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- Mount point --> <xi:include
href="Disk_Partitioning_Graphical_common-para-8.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- Click Apply Changes --> <xi:include
href="Disk_Partitioning_Graphical_common-para-9.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- When all partitions have been created --> <xi:include
href="File_System_Types-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- File System Types --> <!-- <xi:include
href="Create_Software_RAID-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" /> -->
+ <!-- Create Software RAID --> <!-- <xi:include
href="Create_LVM-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude"
/> -->
<!-- Create LVM Logical Volume --> <xi:include
href="Disk_Partitioning_Scheme-x86.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
<!-- Recommended Partitioning Scheme -->
</section>
diff --git a/en-US/Disk_Partitioning_Graphical_common-itemizedlist-1.xml
b/en-US/Disk_Partitioning_Graphical_common-itemizedlist-1.xml
new file mode 100644
index 0000000..e636886
--- /dev/null
+++ b/en-US/Disk_Partitioning_Graphical_common-itemizedlist-1.xml
@@ -0,0 +1,38 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE variablelist PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+<!ENTITY % BOOK_ENTITIES SYSTEM "Installation_Guide.ent">
+%BOOK_ENTITIES;
+]>
+<itemizedlist>
+ <listitem>
+ <para>
+ <guilabel>Mount point</guilabel>: Enter the partition's mount point.
For example, if this partition should be the root partition, enter
<userinput>/</userinput>; enter <userinput>/boot</userinput> for
the <filename>/boot</filename> partition, and so on. For a swap partition the
mount point should not be set — setting the filesystem type to
<literal>swap</literal> is sufficient.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ <guilabel>Label</guilabel>: Assign a label to the partition.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ <guilabel>Desired capacity</guilabel>: Enter the desired size (in
megabytes) of the partition.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ <guilabel>Device Type</guilabel>: Choose between <guilabel>Standard
Partition</guilabel>, <guilabel>LVM</guilabel>, and
<guilabel>BTRFS</guilabel>. For more information on these options, refer to
<xref linkend="s3-diskpartitioning-file-x86" />. Check the adjacent
<guilabel>Encrypt</guilabel> box to encrypt the drive. You will be prompted to
generate a password later.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ <guilabel>File System</guilabel>: Using the pull-down menu, select the
appropriate file system type for this partition. For more information on file system
types, refer to <xref linkend="s3-diskpartitioning-file-x86" />
+ </para>
+ </listitem>
+
+</itemizedlist>
+
diff --git a/en-US/Disk_Partitioning_Graphical_common-para-1.xml
b/en-US/Disk_Partitioning_Graphical_common-para-1.xml
index 2679b47..d211c69 100644
--- a/en-US/Disk_Partitioning_Graphical_common-para-1.xml
+++ b/en-US/Disk_Partitioning_Graphical_common-para-1.xml
@@ -4,6 +4,6 @@
%BOOK_ENTITIES;
]>
<para>
- Using your mouse, click once to highlight a particular field in the graphical display.
Double-click to edit an existing partition or to create a partition out of existing free
space.
+ Alternatively, create individual mount points using the
<guibutton>+</guibutton> button at the bottom of the pane. The
<guilabel>Add a New Mount Point</guilabel> dialog will open. Enter a path for
the mount point (for example, enter <filename>/</filename> for the root
partition, <filename>/boot</filename> for the boot partition, and so on) and
the desired size of the partition in megabytes or gigabytes (for example, type
"2GB" to create a 2 gigabyte partition). After entering these details, click
<guibutton>Add a mount point</guibutton>.
</para>
diff --git a/en-US/Disk_Partitioning_Graphical_common-para-2.xml
b/en-US/Disk_Partitioning_Graphical_common-para-2.xml
index 8a7e355..a4696d4 100644
--- a/en-US/Disk_Partitioning_Graphical_common-para-2.xml
+++ b/en-US/Disk_Partitioning_Graphical_common-para-2.xml
@@ -4,6 +4,6 @@
%BOOK_ENTITIES;
]>
<para>
- Above the graphical representation of the device, you can review the name of the drive
(such as <literal>/dev/sda</literal> or
<literal>LogVol00</literal>), its size (in MB), and its model as detected by
the installation program.
+ To create the mount points automatically, use your mouse to click the link within the
pane that directs you to do so. This will generate a
<filename>/boot</filename> partition, a <filename>/</filename>
(root) partition, and a swap partition proportionate to the size of the device. These are
the recommended partitions for a typical installation (refer to <xref
linkend="s2-diskpartrecommend-x86" />, but you can add additional partitions
if you need to.
</para>
diff --git a/en-US/Disk_Partitioning_Graphical_common-para-3.xml
b/en-US/Disk_Partitioning_Graphical_common-para-3.xml
index c61582d..694aa52 100644
--- a/en-US/Disk_Partitioning_Graphical_common-para-3.xml
+++ b/en-US/Disk_Partitioning_Graphical_common-para-3.xml
@@ -4,6 +4,6 @@
%BOOK_ENTITIES;
]>
<para>
- Devices are grouped by type. Click on the small triangles to the left of each device
type to view or hide devices of that type.
+ To change which drive/s a mount point should be located on, click the configuration
button at the bottom of the pane and select one or more devices.
</para>
diff --git a/en-US/Disk_Partitioning_Graphical_common-para-7.xml
b/en-US/Disk_Partitioning_Graphical_common-para-7.xml
new file mode 100644
index 0000000..9e5766a
--- /dev/null
+++ b/en-US/Disk_Partitioning_Graphical_common-para-7.xml
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+<!ENTITY % BOOK_ENTITIES SYSTEM "Installation_Guide.ent">
+%BOOK_ENTITIES;
+]>
+<para>
+ To customize a partition, select it in the left-hand pane and the following
customizable features will appear to the right (click
<guibutton>Customize</guibutton> to reveal them all):
+</para>
+
diff --git a/en-US/Disk_Partitioning_Graphical_common-para-8.xml
b/en-US/Disk_Partitioning_Graphical_common-para-8.xml
new file mode 100644
index 0000000..47f32ca
--- /dev/null
+++ b/en-US/Disk_Partitioning_Graphical_common-para-8.xml
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+<!ENTITY % BOOK_ENTITIES SYSTEM "Installation_Guide.ent">
+%BOOK_ENTITIES;
+]>
+<para>
+ Click <guibutton>Apply Changes</guibutton> to save your changes and select
another partition to customize.
+</para>
+
diff --git a/en-US/Disk_Partitioning_Graphical_common-para-9.xml
b/en-US/Disk_Partitioning_Graphical_common-para-9.xml
new file mode 100644
index 0000000..3abafa0
--- /dev/null
+++ b/en-US/Disk_Partitioning_Graphical_common-para-9.xml
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE para PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+<!ENTITY % BOOK_ENTITIES SYSTEM "Installation_Guide.ent">
+%BOOK_ENTITIES;
+]>
+<para>
+ When all partitions have been created and customized, click <guibutton>Finish
Partitioning</guibutton> to return to the Installation Hub. If you chose to encrypt
any partitions, you will now be prompted to create a passphrase.
+</para>
+
diff --git a/en-US/Disk_Partitioning_Graphical_x86_ppc-para-1.xml
b/en-US/Disk_Partitioning_Graphical_x86_ppc-para-1.xml
index 35dafde..ddfd144 100644
--- a/en-US/Disk_Partitioning_Graphical_x86_ppc-para-1.xml
+++ b/en-US/Disk_Partitioning_Graphical_x86_ppc-para-1.xml
@@ -4,6 +4,6 @@
%BOOK_ENTITIES;
]>
<para>
- The partitioning screen contains two panes. The top pane contains a graphical
representation of the hard drive, logical volume, or RAID device selected in the lower
pane.
+ The <guilabel>Manual Partitioning</guilabel> screen initially features a
single pane on the left for mount points. The total space and available space on the
device selected in <xref linkend="s1-diskpartsetup-x86" /> are displayed
beneath this pane.
</para>
diff --git a/en-US/Disk_Partitioning_Setup-x86.xml
b/en-US/Disk_Partitioning_Setup-x86.xml
index 77d873e..3a14aed 100644
--- a/en-US/Disk_Partitioning_Setup-x86.xml
+++ b/en-US/Disk_Partitioning_Setup-x86.xml
@@ -19,7 +19,7 @@
<!-- If you have chosen to automatically partition your system ... -->
</important>
<para>
- Select <guilabel>Installation Destination</guilabel> from the Installation
Hub to partition your hard drive.
+ Select <guilabel>Installation Destination</guilabel> from the Installation
Hub to choose which hard drive to install Fedora on and to partition the drive.
</para>
<para>
Partitioning allows you to divide your hard drive into isolated sections, where each
section behaves as its own hard drive. Partitioning is particularly useful if you run
multiple operating systems. If you are not sure how you want your system to be
partitioned, read <xref linkend="ch-partitions-x86" /> for more
information.
diff --git a/en-US/Disk_Partitioning_Setup_common-title.xml
b/en-US/Disk_Partitioning_Setup_common-title.xml
index 7e2001f..ae2ee09 100644
--- a/en-US/Disk_Partitioning_Setup_common-title.xml
+++ b/en-US/Disk_Partitioning_Setup_common-title.xml
@@ -3,5 +3,5 @@
<!ENTITY % BOOK_ENTITIES SYSTEM "Installation_Guide.ent">
%BOOK_ENTITIES;
]>
-<title>Disk Partitioning Setup</title>
+<title>Storage and Partitioning</title>
diff --git a/en-US/Disk_Partitioning_common-title-1.xml
b/en-US/Disk_Partitioning_common-title-1.xml
index bdde840..fe4c062 100644
--- a/en-US/Disk_Partitioning_common-title-1.xml
+++ b/en-US/Disk_Partitioning_common-title-1.xml
@@ -3,5 +3,5 @@
<!ENTITY % BOOK_ENTITIES SYSTEM "Installation_Guide.ent">
%BOOK_ENTITIES;
]>
-<title> Creating a Custom Layout or Modifying the Default Layout </title>
+<title>Creating a Custom Partition Layout</title>
diff --git a/en-US/File_System_Types-x86.xml b/en-US/File_System_Types-x86.xml
new file mode 100644
index 0000000..582f38b
--- /dev/null
+++ b/en-US/File_System_Types-x86.xml
@@ -0,0 +1,25 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+<!ENTITY % BOOK_ENTITIES SYSTEM "Installation_Guide.ent">
+%BOOK_ENTITIES;
+]>
+<section id="s3-diskpartitioning-file-x86">
+ <xi:include href="Adding_Partitions_x86_ppc-title-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- File System Types --> <!-- Begin Index terms --> <xi:include
href="Adding_Partitions-section-2-indexterm-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <xi:include href="Adding_Partitions-section-2-indexterm-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <xi:include href="Adding_Partitions-section-2-indexterm-3.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <xi:include href="Adding_Partitions-section-2-indexterm-4.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- End Index terms --> <xi:include
href="Adding_Partitions-section-2-para-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- Fedora allows you to create different partition types --> <xi:include
href="Adding_Partitions-section-2-itemizedlist-1.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- Partition types --> <xi:include
href="Adding_Partitions-section-2-itemizedlist-2.xml"
xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!-- File systems -->
+
+ <note>
+ <para>
+ The Btrfs file system is unavailable in Fedora 17.
+ </para>
+ </note>
+ </section>
+
+
+
diff --git a/en-US/images/diskpartitioning/ddmain.png
b/en-US/images/diskpartitioning/ddmain.png
index 0bdffbd..d683128 100644
Binary files a/en-US/images/diskpartitioning/ddmain.png and
b/en-US/images/diskpartitioning/ddmain.png differ