[networking-guide] master: Replace ifconfig with "ip link show" (c55228a)

[stephenw]

Repository : http://git.fedorahosted.org/cgit/docs/networking-guide.git

On branch  : master
>

commit c55228ad614a4c70a7c6e1c4b2bcbfe984eadfba
Author: Stephen Wadeley 
Date:   Wed Sep 3 21:54:04 2014 +0200

Replace ifconfig with "ip link show"
>

en-US/Configure_Network_Bonding.xml |   28 ++++++++++------------------
 1 files changed, 10 insertions(+), 18 deletions(-)

diff --git a/en-US/Configure_Network_Bonding.xml b/en-US/Configure_Network_Bonding.xml
index 656980e..c5c3fed 100644
--- a/en-US/Configure_Network_Bonding.xml
+++ b/en-US/Configure_Network_Bonding.xml
@@ -506,24 +506,16 @@ Then when complete, bring up all the slaves, which will bring up the bond (provi
             class="option">MASTER=bond0</parameter> directives in the configuration files for each interface bonded to bond0. Once this is completed, you can proceed to testing the parameters.</para>
         <para>First, bring up the bond you created by running <command>/usr/sbin/ifup <option>bond<replaceable>&lt;N&gt;</replaceable></option></command> as <systemitem class="username">root</systemitem>:</para>
         <screen>~]#&nbsp;<command>/usr/sbin/ifup bond0</command></screen>
-        <para>If you have correctly created the <filename>ifcfg-bond0</filename> bonding interface file, you will be able to see <computeroutput>bond0</computeroutput> listed in the output of running <command>ifconfig</command> (without any options):</para>
-        <screen>~]#&nbsp;<command>ifconfig</command>
-bond0     Link encap:Ethernet HWaddr 00:00:00:00:00:00
-          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
-          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
-          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
-          collisions:0 txqueuelen:0
-          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
-eth0      Link encap:Ethernet  HWaddr 52:54:00:26:9E:F1
-          inet addr:192.168.122.251  Bcast:192.168.122.255  Mask:255.255.255.0
-          inet6 addr: fe80::5054:ff:fe26:9ef1/64 Scope:Link
-          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
-          RX packets:207 errors:0 dropped:0 overruns:0 frame:0
-          TX packets:205 errors:0 dropped:0 overruns:0 carrier:0
-          collisions:0 txqueuelen:1000
-          RX bytes:70374 (68.7 KiB)  TX bytes:25298 (24.7 KiB)
-<lineannotation>[output truncated]</lineannotation>
-        </screen>
+        <para>If you have correctly created the <filename>ifcfg-bond0</filename> bonding interface file, you will be able to see <computeroutput>bond0</computeroutput> listed in the output of running <command> ip link show</command> as <systemitem class="username">root</systemitem>:</para>
+        <screen>~]#&nbsp;<command>ip link show</command>
+1: lo: &lt;LOOPBACK,UP,LOWER_UP&gt; mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
+    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
+2: eth0: &lt;BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP&gt; mtu 1500 qdisc pfifo_fast master bond0 state UP mode DEFAULT qlen 1000
+    link/ether 52:54:00:e9:ce:d2 brd ff:ff:ff:ff:ff:ff
+3: eth1: &lt;BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP&gt; mtu 1500 qdisc pfifo_fast master bond0 state UP mode DEFAULT qlen 1000
+    link/ether 52:54:00:38:a6:4c brd ff:ff:ff:ff:ff:ff
+4: bond0: &lt;BROADCAST,MULTICAST,MASTER,UP,LOWER_UP&gt; mtu 1500 qdisc noqueue state UP mode DEFAULT
+    link/ether 52:54:00:38:a6:4c brd ff:ff:ff:ff:ff:ff</screen>
         <para>To view all existing bonds, even if they are not up, run:</para>
         <screen>~]#&nbsp;<command>cat /sys/class/net/bonding_masters</command>
 bond0</screen>