May 2009 - electronic-lab - Fedora Mailing-Lists

[Fedora-electronic-lab] [Fedora Electronic Lab] #20: package myHDL

by fedora-badges

#20: package myHDL ----------------------+----------------------------------------------------- Reporter: chitlesh | Owner: chitlesh Type: task | Status: new Priority: major | Milestone: Fedora 12 Component: FEL | Version: devel Keywords: | ----------------------+----------------------------------------------------- Upstream was contacted to encourage them to package myHDL for FEL. Upstream responded by saying he will ask his community. -- Ticket URL: <https://fedorahosted.org/fedora-electronic-lab/ticket/20> Fedora Electronic Lab <https://fedorahosted.org/fedora-electronic-lab> Design, Simulate and Program electronics.

12 years, 9 months

1
3
0 / 0

[Fedora-electronic-lab] [Fedora Electronic Lab] #17: improve dia for system level

by fedora-badges

#17: improve dia for system level ----------------------------+----------------------------------------------- Reporter: chitlesh | Owner: chitlesh Type: defect | Status: new Priority: major | Milestone: Fedora 12 Component: digital design | Version: devel Keywords: | ----------------------------+----------------------------------------------- Dia is known to seduce some system level designers and is used to describe different block levels for embedded design. Additional shapes for digital blocks would improve user documentation experience, through neat functional diagram drawn by dia. http://dia-installer.de/shapes.html -- Ticket URL: <https://fedorahosted.org/fedora-electronic-lab/ticket/17> Fedora Electronic Lab <https://fedorahosted.org/fedora-electronic-lab> Design, Simulate and Program electronics.

14 years, 5 months

1
5
0 / 0

[Fedora-electronic-lab] [Fedora Electronic Lab] #18: package gplcver

by fedora-badges

#18: package gplcver --------------------------+------------------------------------------------- Reporter: chitlesh | Owner: chitlesh Type: defect | Status: new Priority: major | Milestone: Fedora 12 Component: VHDL/Verilog | Version: devel Keywords: | --------------------------+------------------------------------------------- Anyone willing to maintain the spec file below ? -- Ticket URL: <https://fedorahosted.org/fedora-electronic-lab/ticket/18> Fedora Electronic Lab <https://fedorahosted.org/fedora-electronic-lab> Design, Simulate and Program electronics.

14 years, 7 months

1
6
0 / 0

[Fedora-electronic-lab] [Fedora Electronic Lab] #14: Component libraries

by fedora-badges

#14: Component libraries -------------------------+-------------------------------------------------- Reporter: anonymous | Owner: chitlesh Type: enhancement | Status: new Priority: trivial | Milestone: Component: FEL | Version: 10 Keywords: | -------------------------+-------------------------------------------------- HI, I love the concept of FEL and I have FEL 10 installed. I have tried gSchem and Kicad before and the main problems I have are the lack of a broad component library. Will there be a move to create a component library to share? I see a site that has a conversion of Eagle libraries but I am not sure as to the legality or quality. Without offense, having gSchem, Kicad, and Xcircuit in the release, it seems like a lack of direction. I would pay for a GPL release that was focused and had a solid user supported component libraries. I ma not a great programmer so I am not sure how I can help. duncan.mcnamara(a)gmail.com -- Ticket URL: <https://fedorahosted.org/fedora-electronic-lab/ticket/14> Fedora Electronic Lab <https://fedorahosted.org/fedora-electronic-lab> Design, Simulate and Program electronics.

14 years, 7 months

1
3
0 / 0

[Fedora-electronic-lab] [Fedora Electronic Lab] #15: FEL with source + build packages

by fedora-badges

#15: FEL with source + build packages -------------------------+-------------------------------------------------- Reporter: shakthimaan | Owner: chitlesh Type: enhancement | Status: new Priority: major | Milestone: Fedora 11 'Leonidas' Component: FEL | Version: devel Keywords: Source | -------------------------+-------------------------------------------------- I would like FEL to include source packages with documentation for various FEL tools that it ships with for the following reasons: 1. It should be a distro that one can install, use, and develop, without the need for an Internet connection. For upgrades, developers can obtain patches and re-build. 2. There are many people who are on dial-up in remote places in India, and the speeds are slow. It takes a really long time to download the source packages or refer documentation. It is only useful for chatting. And most of them on dial-up are on winmodems, and don't have driver support with Fedora. 3. It will be helpful to deploy this standalone solution in a lab. If the above can be done, it will be an off-the-shelf distro that one can simply install and use for learning, development and testing. I think FEL uses only 1.3 GB, so disk space shouldn't be an issue. -- Ticket URL: <https://fedorahosted.org/fedora-electronic-lab/ticket/15> Fedora Electronic Lab <https://fedorahosted.org/fedora-electronic-lab> Design, Simulate and Program electronics.

14 years, 8 months

1
7
0 / 0

[Fedora-electronic-lab] [Fedora Electronic Lab] #21: package veditor for eclipse

by fedora-badges

#21: package veditor for eclipse ----------------------+----------------------------------------------------- Reporter: chitlesh | Owner: chitlesh Type: task | Status: new Priority: major | Milestone: Fedora 12 Component: FEL | Version: devel Keywords: | ----------------------+----------------------------------------------------- Looking for a volunteer to co-maintain veditor. See draft spec file in the attachment. -- Ticket URL: <https://fedorahosted.org/fedora-electronic-lab/ticket/21> Fedora Electronic Lab <https://fedorahosted.org/fedora-electronic-lab> Design, Simulate and Program electronics.

14 years, 10 months

1
2
0 / 0

[Fedora-electronic-lab] [Fedora Electronic Lab] #19: package a 8051 ide (spec included)

by fedora-badges

#19: package a 8051 ide (spec included) -----------------------------+---------------------------------------------- Reporter: chitlesh | Owner: chitlesh Type: defect | Status: new Priority: major | Milestone: Fedora 12 Component: embedded design | Version: devel Keywords: | -----------------------------+---------------------------------------------- Anyone willing to maintain the mcu8051ide ? Spec file provided -- Ticket URL: <https://fedorahosted.org/fedora-electronic-lab/ticket/19> Fedora Electronic Lab <https://fedorahosted.org/fedora-electronic-lab> Design, Simulate and Program electronics.

14 years, 10 months

1
10
0 / 0

[Fedora-electronic-lab] create Liveusb for demonstration

by Chitlesh GOORAH

Hello there, I just want to inform you that you can create liveusb to demonstrate FEL at any events: https://fedoraproject.org/wiki/How_to_create_and_use_Live_USB Example: # livecd-iso-to-disk --reset-mbr --overlay-size-mb 2047 MYFEDORA.iso /dev/sdb1 cheers, Chitlesh

14 years, 11 months

1
0
0 / 0

[Fedora-electronic-lab] FEL on Opencores FOSS tools list

by Rangeen Basu

I was going through the list which I got in today's newsletter and to my surprise I found FEL in the list along with some other FOSS EDA tools. Felt like sharing this news. http://opencores.org/?do=newsletter&2009=05#n5 -- Regards Rangeen Basu Roy Chowdhury Fedora Ambassador sherry151(a)gmail.com Sent from Calcutta, WB, India

14 years, 11 months

1
0
0 / 0

[Fedora-electronic-lab] PCB/FPCB Cooperation

by Andy

Dear Sir or Madam, This is Andy from SAYFU Technology Co., Ltd. Through the internet we acquired your esteemed company name, and we take the liberty of writing this e-mail to you looking for future opportunity of cooperation. SAYFU from China, which is a professional PCB/FPCB supplier with ISO-9001 and UL approval in China. We focus on quick-turn prototype and small-medium volume for 2-30 layer boards, I just wanted to give you a quick note and see if there is anything I can help you with PCBs fabrication. 1. Products range: Rigid PCB up to 30 layers, FPC, Flex-Rigid, Aluminium PCB, Heavy copper boards(3-10 Oz), Buried-blind vias holes .... Material range: FR-4 (130TG-180TG), CEM1, Halogen free laminate, Rogers, Teflon, Aluminum Based, ISOLA, Nelco.... Technology Capability: Min. 3mil/3mil Trace/space, heavy copper board (3-10 Oz) , 4 mil Smallest Drill Size ... 2. No miminum order quantity requirement. You can put 1 piece, 100 piece or large quantity jobs to us, and in return, what we will provide to you are the same quality services and quality products. 3. Quick turn lead time at reasonable Price. We can be delivered double-sided PCBs in 24 hours and four-layer PCBs 48 hours 4. Excellent customer service and quick response. We can send you quotes and inquiry responses in two hours or less. Hope we could help you to extend the business and to be more competitive and both have a fruitful partnership. For more information about our products and services, pls e-mail us or visit our website (www.sayfupcb.com ) we sincerely hope to establish a long-term relationship with you in the future and look forward to hearing from you soon. Andy Liu Sales Department Tel: +86-755-2641 7916 Fax: +86-755-2641 7917 Mobile:+86-135 1077 1602 Skype: sayfupcb MSN: sayfupcb(a)hotmail.com E-mail: andy.liu(a)sayfupcb.com Backup: sayfupcb(a)gmail.com Website: www.sayfupcb.com SAYFU TECHNOLOGY CO.,LIMITED

14 years, 11 months

1
0
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

electronic-lab May 2009