January 2013 - infrastructure - Fedora Mailing-Lists

by cyberworm

So there was not a meeting today wasn't it? I did not see anybody on #fedora-meeting Ivan On Thu, 2013-01-17 at 12:02 +0000, infrastructure-request(a)lists.fedoraproject.org wrote: > Send infrastructure mailing list submissions to > infrastructure(a)lists.fedoraproject.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://admin.fedoraproject.org/mailman/listinfo/infrastructure > or, via email, send a message with subject or body 'help' to > infrastructure-request(a)lists.fedoraproject.org > > You can reach the person managing the list at > infrastructure-owner(a)lists.fedoraproject.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of infrastructure digest..." > > > Today's Topics: > > 1. Fedora 18 Final freeze over! (Kevin Fenzi) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 16 Jan 2013 07:47:45 -0700 > From: Kevin Fenzi <kevin(a)scrye.com> > To: infrastructure(a)lists.fedoraproject.org > Subject: Fedora 18 Final freeze over! > Message-ID: <20130116074745.0245085e(a)jelerak.scrye.com> > Content-Type: text/plain; charset="utf-8" > > The long final freeze is now over with the release of Fedora 18 > yesterday. ;) > > Keep in mind that many folks will be traveling to fudcon tomorrow, so > do try not to push any changes that will destabilize things with no one > around to fix them. > > kevin >

11 years, 3 months

2
1
0 / 0

Fedora 18 Final freeze in effect

by Kevin Fenzi

Greetings. we are now in the infrastructure freeze leading up to the Fedora 18 Final release. This is a full freeze. Please see: https://fedorahosted.org/fedora-infrastructure/browser/architecture/Envir... Anything in the full freeze box is frozen until 2013-01-08 (or later if Final release further slips). This means there should be NO changes to any hosts in there (including global ones) without signoff of the change from at least 2 folks in sysadmin-main and/or release-engineering. Thanks, kevin

11 years, 3 months

1
1
0 / 0

[PATCH 1/2] make hosted01 and hosted02 main.cf be the same - b/c apparently they haven't been for a while :(

by Seth Vidal

From: Seth Vidal <skvidal(a)fedoraproject.org> --- .../main.cf/main.cf.hosted02.fedoraproject.org | 687 ++++++++++++++++++++ .../main.cf/main.cf.hosted03.fedoraproject.org | 687 -------------------- .../main.cf/main.cf.hosted1.fedoraproject.org | 687 -------------------- 3 files changed, 687 insertions(+), 1374 deletions(-) create mode 100644 modules/postfix/files/main.cf/main.cf.hosted02.fedoraproject.org delete mode 100644 modules/postfix/files/main.cf/main.cf.hosted03.fedoraproject.org delete mode 100644 modules/postfix/files/main.cf/main.cf.hosted1.fedoraproject.org diff --git a/modules/postfix/files/main.cf/main.cf.hosted02.fedoraproject.org b/modules/postfix/files/main.cf/main.cf.hosted02.fedoraproject.org new file mode 100644 index 0000000..77da22b --- /dev/null +++ b/modules/postfix/files/main.cf/main.cf.hosted02.fedoraproject.org @@ -0,0 +1,687 @@ +# "false" +# Global Postfix configuration file. This file lists only a subset +# of all parameters. For the syntax, and for a complete parameter +# list, see the postconf(5) manual page (command: "man 5 postconf"). +# +# For common configuration examples, see BASIC_CONFIGURATION_README +# and STANDARD_CONFIGURATION_README. To find these documents, use +# the command "postconf html_directory readme_directory", or go to +# http://www.postfix.org/. +# +# For best results, change no more than 2-3 parameters at a time, +# and test if Postfix still works after every change. + +# SOFT BOUNCE +# +# The soft_bounce parameter provides a limited safety net for +# testing. When soft_bounce is enabled, mail will remain queued that +# would otherwise bounce. This parameter disables locally-generated +# bounces, and prevents the SMTP server from rejecting mail permanently +# (by changing 5xx replies into 4xx replies). However, soft_bounce +# is no cure for address rewriting mistakes or mail routing mistakes. +# +#soft_bounce = no + +# LOCAL PATHNAME INFORMATION +# +# The queue_directory specifies the location of the Postfix queue. +# This is also the root directory of Postfix daemons that run chrooted. +# See the files in examples/chroot-setup for setting up Postfix chroot +# environments on different UNIX systems. +# +queue_directory = /var/spool/postfix + +# The command_directory parameter specifies the location of all +# postXXX commands. +# +command_directory = /usr/sbin + +# The daemon_directory parameter specifies the location of all Postfix +# daemon programs (i.e. programs listed in the master.cf file). This +# directory must be owned by root. +# +daemon_directory = /usr/libexec/postfix + +# QUEUE AND PROCESS OWNERSHIP +# +# The mail_owner parameter specifies the owner of the Postfix queue +# and of most Postfix daemon processes. Specify the name of a user +# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS +# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In +# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED +# USER. +# +mail_owner = postfix + +# The default_privs parameter specifies the default rights used by +# the local delivery agent for delivery to external file or command. +# These rights are used in the absence of a recipient user context. +# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. +# +#default_privs = nobody + +# INTERNET HOST AND DOMAIN NAMES +# +# The myhostname parameter specifies the internet hostname of this +# mail system. The default is to use the fully-qualified domain name +# from gethostname(). $myhostname is used as a default value for many +# other configuration parameters. +# +#myhostname = host.domain.tld +#myhostname = virtual.domain.tld + +# The mydomain parameter specifies the local internet domain name. +# The default is to use $myhostname minus the first component. +# $mydomain is used as a default value for many other configuration +# parameters. +# +#mydomain = domain.tld + +# SENDING MAIL +# +# The myorigin parameter specifies the domain that locally-posted +# mail appears to come from. The default is to append $myhostname, +# which is fine for small sites. If you run a domain with multiple +# machines, you should (1) change this to $mydomain and (2) set up +# a domain-wide alias database that aliases each user to +# user(a)that.users.mailhost. +# +# For the sake of consistency between sender and recipient addresses, +# myorigin also specifies the default domain name that is appended +# to recipient addresses that have no @domain part. +# +#myorigin = $myhostname +#myorigin = $mydomain + +myhostname = fedorahosted.org +myorigin = fedorahosted.org + +# RECEIVING MAIL + +# The inet_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on. By default, +# the software claims all active interfaces on the machine. The +# parameter also controls delivery of mail to user(a)[ip.address]. +# +# See also the proxy_interfaces parameter, for network addresses that +# are forwarded to us via a proxy or network address translator. +# +# Note: you need to stop/start Postfix when this parameter changes. +# +#inet_interfaces = all +#inet_interfaces = $myhostname +#inet_interfaces = $myhostname, localhost +inet_interfaces = all + +# The proxy_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on by way of a +# proxy or network address translation unit. This setting extends +# the address list specified with the inet_interfaces parameter. +# +# You must specify your proxy/NAT addresses when your system is a +# backup MX host for other domains, otherwise mail delivery loops +# will happen when the primary MX host is down. +# +#proxy_interfaces = +#proxy_interfaces = 1.2.3.4 + +# The mydestination parameter specifies the list of domains that this +# machine considers itself the final destination for. +# +# These domains are routed to the delivery agent specified with the +# local_transport parameter setting. By default, that is the UNIX +# compatible delivery agent that lookups all recipients in /etc/passwd +# and /etc/aliases or their equivalent. +# +# The default is $myhostname + localhost.$mydomain. On a mail domain +# gateway, you should also include $mydomain. +# +# Do not specify the names of virtual domains - those domains are +# specified elsewhere (see VIRTUAL_README). +# +# Do not specify the names of domains that this machine is backup MX +# host for. Specify those names via the relay_domains settings for +# the SMTP server, or use permit_mx_backup if you are lazy (see +# STANDARD_CONFIGURATION_README). +# +# The local machine is always the final destination for mail addressed +# to user(a)[the.net.work.address] of an interface that the mail system +# receives mail on (see the inet_interfaces parameter). +# +# Specify a list of host or domain names, /file/name or type:table +# patterns, separated by commas and/or whitespace. A /file/name +# pattern is replaced by its contents; a type:table is matched when +# a name matches a lookup key (the right-hand side is ignored). +# Continue long lines by starting the next line with whitespace. +# +# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". +# +mydestination = $myhostname, localhost.$mydomain, fedora.redhat.com, localhost, fedorahosted.org +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, +# mail.$mydomain, www.$mydomain, ftp.$mydomain + +# REJECTING MAIL FOR UNKNOWN LOCAL USERS +# +# The local_recipient_maps parameter specifies optional lookup tables +# with all names or addresses of users that are local with respect +# to $mydestination, $inet_interfaces or $proxy_interfaces. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown local users. This parameter is defined by default. +# +# To turn off local recipient checking in the SMTP server, specify +# local_recipient_maps = (i.e. empty). +# +# The default setting assumes that you use the default Postfix local +# delivery agent for local delivery. You need to update the +# local_recipient_maps setting if: +# +# - You define $mydestination domain recipients in files other than +# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. +# For example, you define $mydestination domain recipients in +# the $virtual_mailbox_maps files. +# +# - You redefine the local delivery agent in master.cf. +# +# - You redefine the "local_transport" setting in main.cf. +# +# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" +# feature of the Postfix local delivery agent (see local(8)). +# +# Details are described in the LOCAL_RECIPIENT_README file. +# +# Beware: if the Postfix SMTP server runs chrooted, you probably have +# to access the passwd file via the proxymap service, in order to +# overcome chroot restrictions. The alternative, having a copy of +# the system passwd file in the chroot jail is just not practical. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify a bare username, an @domain.tld +# wild-card, or specify a user(a)domain.tld address. +# +local_recipient_maps = $alias_maps +#local_recipient_maps = unix:passwd.byname $alias_maps +#local_recipient_maps = proxy:unix:passwd.byname $alias_maps +#local_recipient_maps = + +# The unknown_local_recipient_reject_code specifies the SMTP server +# response code when a recipient domain matches $mydestination or +# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty +# and the recipient address or address local-part is not found. +# +# The default setting is 550 (reject mail) but it is safer to start +# with 450 (try again later) until you are certain that your +# local_recipient_maps settings are OK. +# +unknown_local_recipient_reject_code = 550 + +# TRUST AND RELAY CONTROL + +# The mynetworks parameter specifies the list of "trusted" SMTP +# clients that have more privileges than "strangers". +# +# In particular, "trusted" SMTP clients are allowed to relay mail +# through Postfix. See the smtpd_recipient_restrictions parameter +# in postconf(5). +# +# You can specify the list of "trusted" network addresses by hand +# or you can let Postfix do it for you (which is the default). +# +# By default (mynetworks_style = subnet), Postfix "trusts" SMTP +# clients in the same IP subnetworks as the local machine. +# On Linux, this does works correctly only with interfaces specified +# with the "ifconfig" command. +# +# Specify "mynetworks_style = class" when Postfix should "trust" SMTP +# clients in the same IP class A/B/C networks as the local machine. +# Don't do this with a dialup site - it would cause Postfix to "trust" +# your entire provider's network. Instead, specify an explicit +# mynetworks list by hand, as described below. +# +# Specify "mynetworks_style = host" when Postfix should "trust" +# only the local machine. +# +#mynetworks_style = class +#mynetworks_style = subnet +#mynetworks_style = host + +# Alternatively, you can specify the mynetworks list by hand, in +# which case Postfix ignores the mynetworks_style setting. +# +# Specify an explicit list of network/netmask patterns, where the +# mask specifies the number of bits in the network part of a host +# address. +# +# You can also specify the absolute pathname of a pattern file instead +# of listing the patterns here. Specify type:table for table-based lookups +# (the value on the table right-hand side is not used). +# +#mynetworks = 168.100.189.0/28, 127.0.0.0/8 +#mynetworks = $config_directory/mynetworks +#mynetworks = hash:/etc/postfix/network_table + + +# The relay_domains parameter restricts what destinations this system will +# relay mail to. See the smtpd_recipient_restrictions description in +# postconf(5) for detailed information. +# +# By default, Postfix relays mail +# - from "trusted" clients (IP address matches $mynetworks) to any destination, +# - from "untrusted" clients to destinations that match $relay_domains or +# subdomains thereof, except addresses with sender-specified routing. +# The default relay_domains value is $mydestination. +# +# In addition to the above, the Postfix SMTP server by default accepts mail +# that Postfix is final destination for: +# - destinations that match $inet_interfaces or $proxy_interfaces, +# - destinations that match $mydestination +# - destinations that match $virtual_alias_domains, +# - destinations that match $virtual_mailbox_domains. +# These destinations do not need to be listed in $relay_domains. +# +# Specify a list of hosts or domains, /file/name patterns or type:name +# lookup tables, separated by commas and/or whitespace. Continue +# long lines by starting the next line with whitespace. A file name +# is replaced by its contents; a type:name table is matched when a +# (parent) domain appears as lookup key. +# +# NOTE: Postfix will not automatically forward mail for domains that +# list this system as their primary or backup MX host. See the +# permit_mx_backup restriction description in postconf(5). +# +#relay_domains = $mydestination + + + +# INTERNET OR INTRANET + +# The relayhost parameter specifies the default host to send mail to +# when no entry is matched in the optional transport(5) table. When +# no relayhost is given, mail is routed directly to the destination. +# +# On an intranet, specify the organizational domain name. If your +# internal DNS uses no MX records, specify the name of the intranet +# gateway host instead. +# +# In the case of SMTP, specify a domain, host, host:port, [host]:port, +# [address] or [address]:port; the form [host] turns off MX lookups. +# +# If you're connected via UUCP, see also the default_transport parameter. +# +#relayhost = $mydomain +#relayhost = [gateway.my.domain] +#relayhost = [mailserver.isp.tld] +#relayhost = uucphost +#relayhost = [an.ip.add.ress] +relayhost = bastion + + +# REJECTING UNKNOWN RELAY USERS +# +# The relay_recipient_maps parameter specifies optional lookup tables +# with all addresses in the domains that match $relay_domains. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown relay users. This feature is off by default. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify an @domain.tld wild-card, or specify +# a user(a)domain.tld address. +# +#relay_recipient_maps = hash:/etc/postfix/relay_recipients + +# INPUT RATE CONTROL +# +# The in_flow_delay configuration parameter implements mail input +# flow control. This feature is turned on by default, although it +# still needs further development (it's disabled on SCO UNIX due +# to an SCO bug). +# +# A Postfix process will pause for $in_flow_delay seconds before +# accepting a new message, when the message arrival rate exceeds the +# message delivery rate. With the default 100 SMTP server process +# limit, this limits the mail inflow to 100 messages a second more +# than the number of messages delivered per second. +# +# Specify 0 to disable the feature. Valid delays are 0..10. +# +#in_flow_delay = 1s + +# ADDRESS REWRITING +# +# The ADDRESS_REWRITING_README document gives information about +# address masquerading or other forms of address rewriting including +# username->Firstname.Lastname mapping. + +masquerade_domains = redhat.com +masquerade_exceptions = root apache + +# ADDRESS REDIRECTION (VIRTUAL DOMAIN) +# +# The VIRTUAL_README document gives information about the many forms +# of domain hosting that Postfix supports. + +# "USER HAS MOVED" BOUNCE MESSAGES +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# TRANSPORT MAP +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# ALIAS DATABASE +# +# The alias_maps parameter specifies the list of alias databases used +# by the local delivery agent. The default list is system dependent. +# +# On systems with NIS, the default is to search the local alias +# database, then the NIS alias database. See aliases(5) for syntax +# details. +# +# If you change the alias database, run "postalias /etc/aliases" (or +# wherever your system stores the mail alias file), or simply run +# "newaliases" to build the necessary DBM or DB file. +# +# It will take a minute or so before changes become visible. Use +# "postfix reload" to eliminate the delay. +# +#alias_maps = dbm:/etc/aliases +alias_maps = hash:/etc/aliases +#alias_maps = hash:/etc/aliases, nis:mail.aliases +#alias_maps = netinfo:/aliases + +# The alias_database parameter specifies the alias database(s) that +# are built with "newaliases" or "sendmail -bi". This is a separate +# configuration parameter, because alias_maps (see above) may specify +# tables that are not necessarily all under control by Postfix. +# +#alias_database = dbm:/etc/aliases +#alias_database = dbm:/etc/mail/aliases +alias_database = hash:/etc/aliases +#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases + +# ADDRESS EXTENSIONS (e.g., user+foo) +# +# The recipient_delimiter parameter specifies the separator between +# user names and address extensions (user+foo). See canonical(5), +# local(8), relocated(5) and virtual(5) for the effects this has on +# aliases, canonical, virtual, relocated and .forward file lookups. +# Basically, the software tries user+foo and .forward+foo before +# trying user and .forward. +# +recipient_delimiter = + + +# DELIVERY TO MAILBOX +# +# The home_mailbox parameter specifies the optional pathname of a +# mailbox file relative to a user's home directory. The default +# mailbox file is /var/spool/mail/user or /var/mail/user. Specify +# "Maildir/" for qmail-style delivery (the / is required). +# +#home_mailbox = Mailbox +#home_mailbox = Maildir/ + +# The mail_spool_directory parameter specifies the directory where +# UNIX-style mailboxes are kept. The default setting depends on the +# system type. +# +#mail_spool_directory = /var/mail +#mail_spool_directory = /var/spool/mail + +# The mailbox_command parameter specifies the optional external +# command to use instead of mailbox delivery. The command is run as +# the recipient with proper HOME, SHELL and LOGNAME environment settings. +# Exception: delivery for root is done as $default_user. +# +# Other environment variables of interest: USER (recipient username), +# EXTENSION (address extension), DOMAIN (domain part of address), +# and LOCAL (the address localpart). +# +# Unlike other Postfix configuration parameters, the mailbox_command +# parameter is not subjected to $parameter substitutions. This is to +# make it easier to specify shell syntax (see example below). +# +# Avoid shell meta characters because they will force Postfix to run +# an expensive shell process. Procmail alone is expensive enough. +# +# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN +# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. +# +#mailbox_command = /usr/bin/procmail +#mailbox_command = /some/where/procmail -a "$EXTENSION" + +# The mailbox_transport specifies the optional transport in master.cf +# to use after processing aliases and .forward files. This parameter +# has precedence over the mailbox_command, fallback_transport and +# luser_relay parameters. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp + +# If using the cyrus-imapd IMAP server deliver local mail to the IMAP +# server using LMTP (Local Mail Transport Protocol), this is prefered +# over the older cyrus deliver program by setting the +# mailbox_transport as below: +# +# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp +# +# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via +# these settings. +# +# local_destination_recipient_limit = 300 +# local_destination_concurrency_limit = 5 +# +# Of course you should adjust these settings as appropriate for the +# capacity of the hardware you are using. The recipient limit setting +# can be used to take advantage of the single instance message store +# capability of Cyrus. The concurrency limit can be used to control +# how many simultaneous LMTP sessions will be permitted to the Cyrus +# message store. +# +# To use the old cyrus deliver program you have to set: +#mailbox_transport = cyrus + +# The fallback_transport specifies the optional transport in master.cf +# to use for recipients that are not found in the UNIX passwd database. +# This parameter has precedence over the luser_relay parameter. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp +#fallback_transport = + +#transport_maps = hash:/etc/postfix/transport +# The luser_relay parameter specifies an optional destination address +# for unknown recipients. By default, mail for unknown@$mydestination, +# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned +# as undeliverable. +# +# The following expansions are done on luser_relay: $user (recipient +# username), $shell (recipient shell), $home (recipient home directory), +# $recipient (full recipient address), $extension (recipient address +# extension), $domain (recipient domain), $local (entire recipient +# localpart), $recipient_delimiter. Specify ${name?value} or +# ${name:value} to expand value only when $name does (does not) exist. +# +# luser_relay works only for the default Postfix local delivery agent. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must specify "local_recipient_maps =" (i.e. empty) in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#luser_relay = $user(a)other.host +#luser_relay = $local(a)other.host +#luser_relay = admin+$local + +# JUNK MAIL CONTROLS +# +# The controls listed here are only a very small subset. The file +# SMTPD_ACCESS_README provides an overview. + +# The header_checks parameter specifies an optional table with patterns +# that each logical message header is matched against, including +# headers that span multiple physical lines. +# +# By default, these patterns also apply to MIME headers and to the +# headers of attached messages. With older Postfix versions, MIME and +# attached message headers were treated as body text. +# +# For details, see "man header_checks". +# +header_checks = regexp:/etc/postfix/header_checks + +# FAST ETRN SERVICE +# +# Postfix maintains per-destination logfiles with information about +# deferred mail, so that mail can be flushed quickly with the SMTP +# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". +# See the ETRN_README document for a detailed description. +# +# The fast_flush_domains parameter controls what destinations are +# eligible for this service. By default, they are all domains that +# this server is willing to relay mail to. +# +#fast_flush_domains = $relay_domains + +# SHOW SOFTWARE VERSION OR NOT +# +# The smtpd_banner parameter specifies the text that follows the 220 +# code in the SMTP server's greeting banner. Some people like to see +# the mail version advertised. By default, Postfix shows no version. +# +# You MUST specify $myhostname at the start of the text. That is an +# RFC requirement. Postfix itself does not care. +# +#smtpd_banner = $myhostname ESMTP $mail_name +#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) + +# PARALLEL DELIVERY TO THE SAME DESTINATION +# +# How many parallel deliveries to the same user or domain? With local +# delivery, it does not make sense to do massively parallel delivery +# to the same user, because mailbox updates must happen sequentially, +# and expensive pipelines in .forward files can cause disasters when +# too many are run at the same time. With SMTP deliveries, 10 +# simultaneous connections to the same domain could be sufficient to +# raise eyebrows. +# +# Each message delivery transport has its XXX_destination_concurrency_limit +# parameter. The default is $default_destination_concurrency_limit for +# most delivery transports. For the local delivery agent the default is 2. + +#local_destination_concurrency_limit = 2 +#default_destination_concurrency_limit = 20 + +# DEBUGGING CONTROL +# +# The debug_peer_level parameter specifies the increment in verbose +# logging level when an SMTP client or server host name or address +# matches a pattern in the debug_peer_list parameter. +# +debug_peer_level = 2 + +# The debug_peer_list parameter specifies an optional list of domain +# or network patterns, /file/name patterns or type:name tables. When +# an SMTP client or server host name or address matches a pattern, +# increase the verbose logging level by the amount specified in the +# debug_peer_level parameter. +# +#debug_peer_list = 127.0.0.1 +#debug_peer_list = some.domain + +# The debugger_command specifies the external command that is executed +# when a Postfix daemon program is run with the -D option. +# +# Use "command .. & sleep 5" so that the debugger can attach before +# the process marches on. If you use an X-based debugger, be sure to +# set up your XAUTHORITY environment variable before starting Postfix. +# +debugger_command = + PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin + xxgdb $daemon_directory/$process_name $process_id & sleep 5 + +# If you can't use X, use this to capture the call stack when a +# daemon crashes. The result is in a file in the configuration +# directory, and is named after the process name and the process ID. +# +# debugger_command = +# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; +# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 +# >$config_directory/$process_name.$process_id.log & sleep 5 +# +# Another possibility is to run gdb under a detached screen session. +# To attach to the screen sesssion, su root and run "screen -r +# <id_string>" where <id_string> uniquely matches one of the detached +# sessions (from "screen -list"). +# +# debugger_command = +# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen +# -dmS $process_name gdb $daemon_directory/$process_name +# $process_id & sleep 1 + +# INSTALL-TIME CONFIGURATION INFORMATION +# +# The following parameters are used when installing a new Postfix version. +# +# sendmail_path: The full pathname of the Postfix sendmail command. +# This is the Sendmail-compatible mail posting interface. +# +sendmail_path = /usr/sbin/sendmail.postfix + +# newaliases_path: The full pathname of the Postfix newaliases command. +# This is the Sendmail-compatible command to build alias databases. +# +newaliases_path = /usr/bin/newaliases.postfix + +# mailq_path: The full pathname of the Postfix mailq command. This +# is the Sendmail-compatible mail queue listing command. +# +mailq_path = /usr/bin/mailq.postfix + +# setgid_group: The group for mail submission and queue management +# commands. This must be a group name with a numerical group ID that +# is not shared with other accounts, not even with the Postfix account. +# +setgid_group = postdrop + +# html_directory: The location of the Postfix HTML documentation. +# +html_directory = no + +# manpage_directory: The location of the Postfix on-line manual pages. +# +manpage_directory = /usr/share/man + +# sample_directory: The location of the Postfix sample configuration files. +# This parameter is obsolete as of Postfix 2.1. +# +sample_directory = /usr/share/doc/postfix-2.4.5/samples + +# readme_directory: The location of the Postfix README files. +# +readme_directory = /usr/share/doc/postfix-2.4.5/README_FILES + +# add this to new postfix to get it to add proper message-id and other +# headers to outgoing emails via the gateway. + + +message_size_limit = 20971520 diff --git a/modules/postfix/files/main.cf/main.cf.hosted03.fedoraproject.org b/modules/postfix/files/main.cf/main.cf.hosted03.fedoraproject.org deleted file mode 100644 index f174c55..0000000 --- a/modules/postfix/files/main.cf/main.cf.hosted03.fedoraproject.org +++ /dev/null @@ -1,687 +0,0 @@ -# "false" -# Global Postfix configuration file. This file lists only a subset -# of all parameters. For the syntax, and for a complete parameter -# list, see the postconf(5) manual page (command: "man 5 postconf"). -# -# For common configuration examples, see BASIC_CONFIGURATION_README -# and STANDARD_CONFIGURATION_README. To find these documents, use -# the command "postconf html_directory readme_directory", or go to -# http://www.postfix.org/. -# -# For best results, change no more than 2-3 parameters at a time, -# and test if Postfix still works after every change. - -# SOFT BOUNCE -# -# The soft_bounce parameter provides a limited safety net for -# testing. When soft_bounce is enabled, mail will remain queued that -# would otherwise bounce. This parameter disables locally-generated -# bounces, and prevents the SMTP server from rejecting mail permanently -# (by changing 5xx replies into 4xx replies). However, soft_bounce -# is no cure for address rewriting mistakes or mail routing mistakes. -# -#soft_bounce = no - -# LOCAL PATHNAME INFORMATION -# -# The queue_directory specifies the location of the Postfix queue. -# This is also the root directory of Postfix daemons that run chrooted. -# See the files in examples/chroot-setup for setting up Postfix chroot -# environments on different UNIX systems. -# -queue_directory = /var/spool/postfix - -# The command_directory parameter specifies the location of all -# postXXX commands. -# -command_directory = /usr/sbin - -# The daemon_directory parameter specifies the location of all Postfix -# daemon programs (i.e. programs listed in the master.cf file). This -# directory must be owned by root. -# -daemon_directory = /usr/libexec/postfix - -# QUEUE AND PROCESS OWNERSHIP -# -# The mail_owner parameter specifies the owner of the Postfix queue -# and of most Postfix daemon processes. Specify the name of a user -# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS -# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In -# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED -# USER. -# -mail_owner = postfix - -# The default_privs parameter specifies the default rights used by -# the local delivery agent for delivery to external file or command. -# These rights are used in the absence of a recipient user context. -# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. -# -#default_privs = nobody - -# INTERNET HOST AND DOMAIN NAMES -# -# The myhostname parameter specifies the internet hostname of this -# mail system. The default is to use the fully-qualified domain name -# from gethostname(). $myhostname is used as a default value for many -# other configuration parameters. -# -#myhostname = host.domain.tld -#myhostname = virtual.domain.tld - -# The mydomain parameter specifies the local internet domain name. -# The default is to use $myhostname minus the first component. -# $mydomain is used as a default value for many other configuration -# parameters. -# -#mydomain = domain.tld - -# SENDING MAIL -# -# The myorigin parameter specifies the domain that locally-posted -# mail appears to come from. The default is to append $myhostname, -# which is fine for small sites. If you run a domain with multiple -# machines, you should (1) change this to $mydomain and (2) set up -# a domain-wide alias database that aliases each user to -# user(a)that.users.mailhost. -# -# For the sake of consistency between sender and recipient addresses, -# myorigin also specifies the default domain name that is appended -# to recipient addresses that have no @domain part. -# -#myorigin = $myhostname -#myorigin = $mydomain - -myhostname = fedorahosted.org -myorigin = fedorahosted.org - -# RECEIVING MAIL - -# The inet_interfaces parameter specifies the network interface -# addresses that this mail system receives mail on. By default, -# the software claims all active interfaces on the machine. The -# parameter also controls delivery of mail to user(a)[ip.address]. -# -# See also the proxy_interfaces parameter, for network addresses that -# are forwarded to us via a proxy or network address translator. -# -# Note: you need to stop/start Postfix when this parameter changes. -# -#inet_interfaces = all -#inet_interfaces = $myhostname -#inet_interfaces = $myhostname, localhost -inet_interfaces = all - -# The proxy_interfaces parameter specifies the network interface -# addresses that this mail system receives mail on by way of a -# proxy or network address translation unit. This setting extends -# the address list specified with the inet_interfaces parameter. -# -# You must specify your proxy/NAT addresses when your system is a -# backup MX host for other domains, otherwise mail delivery loops -# will happen when the primary MX host is down. -# -#proxy_interfaces = -#proxy_interfaces = 1.2.3.4 - -# The mydestination parameter specifies the list of domains that this -# machine considers itself the final destination for. -# -# These domains are routed to the delivery agent specified with the -# local_transport parameter setting. By default, that is the UNIX -# compatible delivery agent that lookups all recipients in /etc/passwd -# and /etc/aliases or their equivalent. -# -# The default is $myhostname + localhost.$mydomain. On a mail domain -# gateway, you should also include $mydomain. -# -# Do not specify the names of virtual domains - those domains are -# specified elsewhere (see VIRTUAL_README). -# -# Do not specify the names of domains that this machine is backup MX -# host for. Specify those names via the relay_domains settings for -# the SMTP server, or use permit_mx_backup if you are lazy (see -# STANDARD_CONFIGURATION_README). -# -# The local machine is always the final destination for mail addressed -# to user(a)[the.net.work.address] of an interface that the mail system -# receives mail on (see the inet_interfaces parameter). -# -# Specify a list of host or domain names, /file/name or type:table -# patterns, separated by commas and/or whitespace. A /file/name -# pattern is replaced by its contents; a type:table is matched when -# a name matches a lookup key (the right-hand side is ignored). -# Continue long lines by starting the next line with whitespace. -# -# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". -# -mydestination = $myhostname, localhost.$mydomain, fedora.redhat.com, localhost, fedorahosted.org -#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain -#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, -# mail.$mydomain, www.$mydomain, ftp.$mydomain - -# REJECTING MAIL FOR UNKNOWN LOCAL USERS -# -# The local_recipient_maps parameter specifies optional lookup tables -# with all names or addresses of users that are local with respect -# to $mydestination, $inet_interfaces or $proxy_interfaces. -# -# If this parameter is defined, then the SMTP server will reject -# mail for unknown local users. This parameter is defined by default. -# -# To turn off local recipient checking in the SMTP server, specify -# local_recipient_maps = (i.e. empty). -# -# The default setting assumes that you use the default Postfix local -# delivery agent for local delivery. You need to update the -# local_recipient_maps setting if: -# -# - You define $mydestination domain recipients in files other than -# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. -# For example, you define $mydestination domain recipients in -# the $virtual_mailbox_maps files. -# -# - You redefine the local delivery agent in master.cf. -# -# - You redefine the "local_transport" setting in main.cf. -# -# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" -# feature of the Postfix local delivery agent (see local(8)). -# -# Details are described in the LOCAL_RECIPIENT_README file. -# -# Beware: if the Postfix SMTP server runs chrooted, you probably have -# to access the passwd file via the proxymap service, in order to -# overcome chroot restrictions. The alternative, having a copy of -# the system passwd file in the chroot jail is just not practical. -# -# The right-hand side of the lookup tables is conveniently ignored. -# In the left-hand side, specify a bare username, an @domain.tld -# wild-card, or specify a user(a)domain.tld address. -# -local_recipient_maps = $alias_maps -#local_recipient_maps = unix:passwd.byname $alias_maps -#local_recipient_maps = proxy:unix:passwd.byname $alias_maps -#local_recipient_maps = - -# The unknown_local_recipient_reject_code specifies the SMTP server -# response code when a recipient domain matches $mydestination or -# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty -# and the recipient address or address local-part is not found. -# -# The default setting is 550 (reject mail) but it is safer to start -# with 450 (try again later) until you are certain that your -# local_recipient_maps settings are OK. -# -unknown_local_recipient_reject_code = 550 - -# TRUST AND RELAY CONTROL - -# The mynetworks parameter specifies the list of "trusted" SMTP -# clients that have more privileges than "strangers". -# -# In particular, "trusted" SMTP clients are allowed to relay mail -# through Postfix. See the smtpd_recipient_restrictions parameter -# in postconf(5). -# -# You can specify the list of "trusted" network addresses by hand -# or you can let Postfix do it for you (which is the default). -# -# By default (mynetworks_style = subnet), Postfix "trusts" SMTP -# clients in the same IP subnetworks as the local machine. -# On Linux, this does works correctly only with interfaces specified -# with the "ifconfig" command. -# -# Specify "mynetworks_style = class" when Postfix should "trust" SMTP -# clients in the same IP class A/B/C networks as the local machine. -# Don't do this with a dialup site - it would cause Postfix to "trust" -# your entire provider's network. Instead, specify an explicit -# mynetworks list by hand, as described below. -# -# Specify "mynetworks_style = host" when Postfix should "trust" -# only the local machine. -# -#mynetworks_style = class -#mynetworks_style = subnet -#mynetworks_style = host - -# Alternatively, you can specify the mynetworks list by hand, in -# which case Postfix ignores the mynetworks_style setting. -# -# Specify an explicit list of network/netmask patterns, where the -# mask specifies the number of bits in the network part of a host -# address. -# -# You can also specify the absolute pathname of a pattern file instead -# of listing the patterns here. Specify type:table for table-based lookups -# (the value on the table right-hand side is not used). -# -#mynetworks = 168.100.189.0/28, 127.0.0.0/8 -#mynetworks = $config_directory/mynetworks -#mynetworks = hash:/etc/postfix/network_table - - -# The relay_domains parameter restricts what destinations this system will -# relay mail to. See the smtpd_recipient_restrictions description in -# postconf(5) for detailed information. -# -# By default, Postfix relays mail -# - from "trusted" clients (IP address matches $mynetworks) to any destination, -# - from "untrusted" clients to destinations that match $relay_domains or -# subdomains thereof, except addresses with sender-specified routing. -# The default relay_domains value is $mydestination. -# -# In addition to the above, the Postfix SMTP server by default accepts mail -# that Postfix is final destination for: -# - destinations that match $inet_interfaces or $proxy_interfaces, -# - destinations that match $mydestination -# - destinations that match $virtual_alias_domains, -# - destinations that match $virtual_mailbox_domains. -# These destinations do not need to be listed in $relay_domains. -# -# Specify a list of hosts or domains, /file/name patterns or type:name -# lookup tables, separated by commas and/or whitespace. Continue -# long lines by starting the next line with whitespace. A file name -# is replaced by its contents; a type:name table is matched when a -# (parent) domain appears as lookup key. -# -# NOTE: Postfix will not automatically forward mail for domains that -# list this system as their primary or backup MX host. See the -# permit_mx_backup restriction description in postconf(5). -# -#relay_domains = $mydestination - - - -# INTERNET OR INTRANET - -# The relayhost parameter specifies the default host to send mail to -# when no entry is matched in the optional transport(5) table. When -# no relayhost is given, mail is routed directly to the destination. -# -# On an intranet, specify the organizational domain name. If your -# internal DNS uses no MX records, specify the name of the intranet -# gateway host instead. -# -# In the case of SMTP, specify a domain, host, host:port, [host]:port, -# [address] or [address]:port; the form [host] turns off MX lookups. -# -# If you're connected via UUCP, see also the default_transport parameter. -# -#relayhost = $mydomain -#relayhost = [gateway.my.domain] -#relayhost = [mailserver.isp.tld] -#relayhost = uucphost -#relayhost = [an.ip.add.ress] -relayhost = bastion - - -# REJECTING UNKNOWN RELAY USERS -# -# The relay_recipient_maps parameter specifies optional lookup tables -# with all addresses in the domains that match $relay_domains. -# -# If this parameter is defined, then the SMTP server will reject -# mail for unknown relay users. This feature is off by default. -# -# The right-hand side of the lookup tables is conveniently ignored. -# In the left-hand side, specify an @domain.tld wild-card, or specify -# a user(a)domain.tld address. -# -#relay_recipient_maps = hash:/etc/postfix/relay_recipients - -# INPUT RATE CONTROL -# -# The in_flow_delay configuration parameter implements mail input -# flow control. This feature is turned on by default, although it -# still needs further development (it's disabled on SCO UNIX due -# to an SCO bug). -# -# A Postfix process will pause for $in_flow_delay seconds before -# accepting a new message, when the message arrival rate exceeds the -# message delivery rate. With the default 100 SMTP server process -# limit, this limits the mail inflow to 100 messages a second more -# than the number of messages delivered per second. -# -# Specify 0 to disable the feature. Valid delays are 0..10. -# -#in_flow_delay = 1s - -# ADDRESS REWRITING -# -# The ADDRESS_REWRITING_README document gives information about -# address masquerading or other forms of address rewriting including -# username->Firstname.Lastname mapping. - -masquerade_domains = redhat.com -masquerade_exceptions = root apache - -# ADDRESS REDIRECTION (VIRTUAL DOMAIN) -# -# The VIRTUAL_README document gives information about the many forms -# of domain hosting that Postfix supports. - -# "USER HAS MOVED" BOUNCE MESSAGES -# -# See the discussion in the ADDRESS_REWRITING_README document. - -# TRANSPORT MAP -# -# See the discussion in the ADDRESS_REWRITING_README document. - -# ALIAS DATABASE -# -# The alias_maps parameter specifies the list of alias databases used -# by the local delivery agent. The default list is system dependent. -# -# On systems with NIS, the default is to search the local alias -# database, then the NIS alias database. See aliases(5) for syntax -# details. -# -# If you change the alias database, run "postalias /etc/aliases" (or -# wherever your system stores the mail alias file), or simply run -# "newaliases" to build the necessary DBM or DB file. -# -# It will take a minute or so before changes become visible. Use -# "postfix reload" to eliminate the delay. -# -#alias_maps = dbm:/etc/aliases -alias_maps = hash:/etc/aliases, hash:/etc/mailman/aliases -#alias_maps = hash:/etc/aliases, nis:mail.aliases -#alias_maps = netinfo:/aliases - -# The alias_database parameter specifies the alias database(s) that -# are built with "newaliases" or "sendmail -bi". This is a separate -# configuration parameter, because alias_maps (see above) may specify -# tables that are not necessarily all under control by Postfix. -# -#alias_database = dbm:/etc/aliases -#alias_database = dbm:/etc/mail/aliases -alias_database = hash:/etc/aliases -#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases - -# ADDRESS EXTENSIONS (e.g., user+foo) -# -# The recipient_delimiter parameter specifies the separator between -# user names and address extensions (user+foo). See canonical(5), -# local(8), relocated(5) and virtual(5) for the effects this has on -# aliases, canonical, virtual, relocated and .forward file lookups. -# Basically, the software tries user+foo and .forward+foo before -# trying user and .forward. -# -recipient_delimiter = + - -# DELIVERY TO MAILBOX -# -# The home_mailbox parameter specifies the optional pathname of a -# mailbox file relative to a user's home directory. The default -# mailbox file is /var/spool/mail/user or /var/mail/user. Specify -# "Maildir/" for qmail-style delivery (the / is required). -# -#home_mailbox = Mailbox -#home_mailbox = Maildir/ - -# The mail_spool_directory parameter specifies the directory where -# UNIX-style mailboxes are kept. The default setting depends on the -# system type. -# -#mail_spool_directory = /var/mail -#mail_spool_directory = /var/spool/mail - -# The mailbox_command parameter specifies the optional external -# command to use instead of mailbox delivery. The command is run as -# the recipient with proper HOME, SHELL and LOGNAME environment settings. -# Exception: delivery for root is done as $default_user. -# -# Other environment variables of interest: USER (recipient username), -# EXTENSION (address extension), DOMAIN (domain part of address), -# and LOCAL (the address localpart). -# -# Unlike other Postfix configuration parameters, the mailbox_command -# parameter is not subjected to $parameter substitutions. This is to -# make it easier to specify shell syntax (see example below). -# -# Avoid shell meta characters because they will force Postfix to run -# an expensive shell process. Procmail alone is expensive enough. -# -# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN -# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. -# -#mailbox_command = /usr/bin/procmail -#mailbox_command = /some/where/procmail -a "$EXTENSION" - -# The mailbox_transport specifies the optional transport in master.cf -# to use after processing aliases and .forward files. This parameter -# has precedence over the mailbox_command, fallback_transport and -# luser_relay parameters. -# -# Specify a string of the form transport:nexthop, where transport is -# the name of a mail delivery transport defined in master.cf. The -# :nexthop part is optional. For more details see the sample transport -# configuration file. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must update the "local_recipient_maps" setting in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp - -# If using the cyrus-imapd IMAP server deliver local mail to the IMAP -# server using LMTP (Local Mail Transport Protocol), this is prefered -# over the older cyrus deliver program by setting the -# mailbox_transport as below: -# -# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp -# -# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via -# these settings. -# -# local_destination_recipient_limit = 300 -# local_destination_concurrency_limit = 5 -# -# Of course you should adjust these settings as appropriate for the -# capacity of the hardware you are using. The recipient limit setting -# can be used to take advantage of the single instance message store -# capability of Cyrus. The concurrency limit can be used to control -# how many simultaneous LMTP sessions will be permitted to the Cyrus -# message store. -# -# To use the old cyrus deliver program you have to set: -#mailbox_transport = cyrus - -# The fallback_transport specifies the optional transport in master.cf -# to use for recipients that are not found in the UNIX passwd database. -# This parameter has precedence over the luser_relay parameter. -# -# Specify a string of the form transport:nexthop, where transport is -# the name of a mail delivery transport defined in master.cf. The -# :nexthop part is optional. For more details see the sample transport -# configuration file. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must update the "local_recipient_maps" setting in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp -#fallback_transport = - -#transport_maps = hash:/etc/postfix/transport -# The luser_relay parameter specifies an optional destination address -# for unknown recipients. By default, mail for unknown@$mydestination, -# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned -# as undeliverable. -# -# The following expansions are done on luser_relay: $user (recipient -# username), $shell (recipient shell), $home (recipient home directory), -# $recipient (full recipient address), $extension (recipient address -# extension), $domain (recipient domain), $local (entire recipient -# localpart), $recipient_delimiter. Specify ${name?value} or -# ${name:value} to expand value only when $name does (does not) exist. -# -# luser_relay works only for the default Postfix local delivery agent. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must specify "local_recipient_maps =" (i.e. empty) in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#luser_relay = $user(a)other.host -#luser_relay = $local(a)other.host -#luser_relay = admin+$local - -# JUNK MAIL CONTROLS -# -# The controls listed here are only a very small subset. The file -# SMTPD_ACCESS_README provides an overview. - -# The header_checks parameter specifies an optional table with patterns -# that each logical message header is matched against, including -# headers that span multiple physical lines. -# -# By default, these patterns also apply to MIME headers and to the -# headers of attached messages. With older Postfix versions, MIME and -# attached message headers were treated as body text. -# -# For details, see "man header_checks". -# -header_checks = regexp:/etc/postfix/header_checks - -# FAST ETRN SERVICE -# -# Postfix maintains per-destination logfiles with information about -# deferred mail, so that mail can be flushed quickly with the SMTP -# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". -# See the ETRN_README document for a detailed description. -# -# The fast_flush_domains parameter controls what destinations are -# eligible for this service. By default, they are all domains that -# this server is willing to relay mail to. -# -#fast_flush_domains = $relay_domains - -# SHOW SOFTWARE VERSION OR NOT -# -# The smtpd_banner parameter specifies the text that follows the 220 -# code in the SMTP server's greeting banner. Some people like to see -# the mail version advertised. By default, Postfix shows no version. -# -# You MUST specify $myhostname at the start of the text. That is an -# RFC requirement. Postfix itself does not care. -# -#smtpd_banner = $myhostname ESMTP $mail_name -#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) - -# PARALLEL DELIVERY TO THE SAME DESTINATION -# -# How many parallel deliveries to the same user or domain? With local -# delivery, it does not make sense to do massively parallel delivery -# to the same user, because mailbox updates must happen sequentially, -# and expensive pipelines in .forward files can cause disasters when -# too many are run at the same time. With SMTP deliveries, 10 -# simultaneous connections to the same domain could be sufficient to -# raise eyebrows. -# -# Each message delivery transport has its XXX_destination_concurrency_limit -# parameter. The default is $default_destination_concurrency_limit for -# most delivery transports. For the local delivery agent the default is 2. - -#local_destination_concurrency_limit = 2 -#default_destination_concurrency_limit = 20 - -# DEBUGGING CONTROL -# -# The debug_peer_level parameter specifies the increment in verbose -# logging level when an SMTP client or server host name or address -# matches a pattern in the debug_peer_list parameter. -# -debug_peer_level = 2 - -# The debug_peer_list parameter specifies an optional list of domain -# or network patterns, /file/name patterns or type:name tables. When -# an SMTP client or server host name or address matches a pattern, -# increase the verbose logging level by the amount specified in the -# debug_peer_level parameter. -# -#debug_peer_list = 127.0.0.1 -#debug_peer_list = some.domain - -# The debugger_command specifies the external command that is executed -# when a Postfix daemon program is run with the -D option. -# -# Use "command .. & sleep 5" so that the debugger can attach before -# the process marches on. If you use an X-based debugger, be sure to -# set up your XAUTHORITY environment variable before starting Postfix. -# -debugger_command = - PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin - xxgdb $daemon_directory/$process_name $process_id & sleep 5 - -# If you can't use X, use this to capture the call stack when a -# daemon crashes. The result is in a file in the configuration -# directory, and is named after the process name and the process ID. -# -# debugger_command = -# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; -# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 -# >$config_directory/$process_name.$process_id.log & sleep 5 -# -# Another possibility is to run gdb under a detached screen session. -# To attach to the screen sesssion, su root and run "screen -r -# <id_string>" where <id_string> uniquely matches one of the detached -# sessions (from "screen -list"). -# -# debugger_command = -# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen -# -dmS $process_name gdb $daemon_directory/$process_name -# $process_id & sleep 1 - -# INSTALL-TIME CONFIGURATION INFORMATION -# -# The following parameters are used when installing a new Postfix version. -# -# sendmail_path: The full pathname of the Postfix sendmail command. -# This is the Sendmail-compatible mail posting interface. -# -sendmail_path = /usr/sbin/sendmail.postfix - -# newaliases_path: The full pathname of the Postfix newaliases command. -# This is the Sendmail-compatible command to build alias databases. -# -newaliases_path = /usr/bin/newaliases.postfix - -# mailq_path: The full pathname of the Postfix mailq command. This -# is the Sendmail-compatible mail queue listing command. -# -mailq_path = /usr/bin/mailq.postfix - -# setgid_group: The group for mail submission and queue management -# commands. This must be a group name with a numerical group ID that -# is not shared with other accounts, not even with the Postfix account. -# -setgid_group = postdrop - -# html_directory: The location of the Postfix HTML documentation. -# -html_directory = no - -# manpage_directory: The location of the Postfix on-line manual pages. -# -manpage_directory = /usr/share/man - -# sample_directory: The location of the Postfix sample configuration files. -# This parameter is obsolete as of Postfix 2.1. -# -sample_directory = /usr/share/doc/postfix-2.4.5/samples - -# readme_directory: The location of the Postfix README files. -# -readme_directory = /usr/share/doc/postfix-2.4.5/README_FILES - -# add this to new postfix to get it to add proper message-id and other -# headers to outgoing emails via the gateway. - - -message_size_limit = 20971520 diff --git a/modules/postfix/files/main.cf/main.cf.hosted1.fedoraproject.org b/modules/postfix/files/main.cf/main.cf.hosted1.fedoraproject.org deleted file mode 100644 index f174c55..0000000 --- a/modules/postfix/files/main.cf/main.cf.hosted1.fedoraproject.org +++ /dev/null @@ -1,687 +0,0 @@ -# "false" -# Global Postfix configuration file. This file lists only a subset -# of all parameters. For the syntax, and for a complete parameter -# list, see the postconf(5) manual page (command: "man 5 postconf"). -# -# For common configuration examples, see BASIC_CONFIGURATION_README -# and STANDARD_CONFIGURATION_README. To find these documents, use -# the command "postconf html_directory readme_directory", or go to -# http://www.postfix.org/. -# -# For best results, change no more than 2-3 parameters at a time, -# and test if Postfix still works after every change. - -# SOFT BOUNCE -# -# The soft_bounce parameter provides a limited safety net for -# testing. When soft_bounce is enabled, mail will remain queued that -# would otherwise bounce. This parameter disables locally-generated -# bounces, and prevents the SMTP server from rejecting mail permanently -# (by changing 5xx replies into 4xx replies). However, soft_bounce -# is no cure for address rewriting mistakes or mail routing mistakes. -# -#soft_bounce = no - -# LOCAL PATHNAME INFORMATION -# -# The queue_directory specifies the location of the Postfix queue. -# This is also the root directory of Postfix daemons that run chrooted. -# See the files in examples/chroot-setup for setting up Postfix chroot -# environments on different UNIX systems. -# -queue_directory = /var/spool/postfix - -# The command_directory parameter specifies the location of all -# postXXX commands. -# -command_directory = /usr/sbin - -# The daemon_directory parameter specifies the location of all Postfix -# daemon programs (i.e. programs listed in the master.cf file). This -# directory must be owned by root. -# -daemon_directory = /usr/libexec/postfix - -# QUEUE AND PROCESS OWNERSHIP -# -# The mail_owner parameter specifies the owner of the Postfix queue -# and of most Postfix daemon processes. Specify the name of a user -# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS -# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In -# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED -# USER. -# -mail_owner = postfix - -# The default_privs parameter specifies the default rights used by -# the local delivery agent for delivery to external file or command. -# These rights are used in the absence of a recipient user context. -# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. -# -#default_privs = nobody - -# INTERNET HOST AND DOMAIN NAMES -# -# The myhostname parameter specifies the internet hostname of this -# mail system. The default is to use the fully-qualified domain name -# from gethostname(). $myhostname is used as a default value for many -# other configuration parameters. -# -#myhostname = host.domain.tld -#myhostname = virtual.domain.tld - -# The mydomain parameter specifies the local internet domain name. -# The default is to use $myhostname minus the first component. -# $mydomain is used as a default value for many other configuration -# parameters. -# -#mydomain = domain.tld - -# SENDING MAIL -# -# The myorigin parameter specifies the domain that locally-posted -# mail appears to come from. The default is to append $myhostname, -# which is fine for small sites. If you run a domain with multiple -# machines, you should (1) change this to $mydomain and (2) set up -# a domain-wide alias database that aliases each user to -# user(a)that.users.mailhost. -# -# For the sake of consistency between sender and recipient addresses, -# myorigin also specifies the default domain name that is appended -# to recipient addresses that have no @domain part. -# -#myorigin = $myhostname -#myorigin = $mydomain - -myhostname = fedorahosted.org -myorigin = fedorahosted.org - -# RECEIVING MAIL - -# The inet_interfaces parameter specifies the network interface -# addresses that this mail system receives mail on. By default, -# the software claims all active interfaces on the machine. The -# parameter also controls delivery of mail to user(a)[ip.address]. -# -# See also the proxy_interfaces parameter, for network addresses that -# are forwarded to us via a proxy or network address translator. -# -# Note: you need to stop/start Postfix when this parameter changes. -# -#inet_interfaces = all -#inet_interfaces = $myhostname -#inet_interfaces = $myhostname, localhost -inet_interfaces = all - -# The proxy_interfaces parameter specifies the network interface -# addresses that this mail system receives mail on by way of a -# proxy or network address translation unit. This setting extends -# the address list specified with the inet_interfaces parameter. -# -# You must specify your proxy/NAT addresses when your system is a -# backup MX host for other domains, otherwise mail delivery loops -# will happen when the primary MX host is down. -# -#proxy_interfaces = -#proxy_interfaces = 1.2.3.4 - -# The mydestination parameter specifies the list of domains that this -# machine considers itself the final destination for. -# -# These domains are routed to the delivery agent specified with the -# local_transport parameter setting. By default, that is the UNIX -# compatible delivery agent that lookups all recipients in /etc/passwd -# and /etc/aliases or their equivalent. -# -# The default is $myhostname + localhost.$mydomain. On a mail domain -# gateway, you should also include $mydomain. -# -# Do not specify the names of virtual domains - those domains are -# specified elsewhere (see VIRTUAL_README). -# -# Do not specify the names of domains that this machine is backup MX -# host for. Specify those names via the relay_domains settings for -# the SMTP server, or use permit_mx_backup if you are lazy (see -# STANDARD_CONFIGURATION_README). -# -# The local machine is always the final destination for mail addressed -# to user(a)[the.net.work.address] of an interface that the mail system -# receives mail on (see the inet_interfaces parameter). -# -# Specify a list of host or domain names, /file/name or type:table -# patterns, separated by commas and/or whitespace. A /file/name -# pattern is replaced by its contents; a type:table is matched when -# a name matches a lookup key (the right-hand side is ignored). -# Continue long lines by starting the next line with whitespace. -# -# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". -# -mydestination = $myhostname, localhost.$mydomain, fedora.redhat.com, localhost, fedorahosted.org -#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain -#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, -# mail.$mydomain, www.$mydomain, ftp.$mydomain - -# REJECTING MAIL FOR UNKNOWN LOCAL USERS -# -# The local_recipient_maps parameter specifies optional lookup tables -# with all names or addresses of users that are local with respect -# to $mydestination, $inet_interfaces or $proxy_interfaces. -# -# If this parameter is defined, then the SMTP server will reject -# mail for unknown local users. This parameter is defined by default. -# -# To turn off local recipient checking in the SMTP server, specify -# local_recipient_maps = (i.e. empty). -# -# The default setting assumes that you use the default Postfix local -# delivery agent for local delivery. You need to update the -# local_recipient_maps setting if: -# -# - You define $mydestination domain recipients in files other than -# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. -# For example, you define $mydestination domain recipients in -# the $virtual_mailbox_maps files. -# -# - You redefine the local delivery agent in master.cf. -# -# - You redefine the "local_transport" setting in main.cf. -# -# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" -# feature of the Postfix local delivery agent (see local(8)). -# -# Details are described in the LOCAL_RECIPIENT_README file. -# -# Beware: if the Postfix SMTP server runs chrooted, you probably have -# to access the passwd file via the proxymap service, in order to -# overcome chroot restrictions. The alternative, having a copy of -# the system passwd file in the chroot jail is just not practical. -# -# The right-hand side of the lookup tables is conveniently ignored. -# In the left-hand side, specify a bare username, an @domain.tld -# wild-card, or specify a user(a)domain.tld address. -# -local_recipient_maps = $alias_maps -#local_recipient_maps = unix:passwd.byname $alias_maps -#local_recipient_maps = proxy:unix:passwd.byname $alias_maps -#local_recipient_maps = - -# The unknown_local_recipient_reject_code specifies the SMTP server -# response code when a recipient domain matches $mydestination or -# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty -# and the recipient address or address local-part is not found. -# -# The default setting is 550 (reject mail) but it is safer to start -# with 450 (try again later) until you are certain that your -# local_recipient_maps settings are OK. -# -unknown_local_recipient_reject_code = 550 - -# TRUST AND RELAY CONTROL - -# The mynetworks parameter specifies the list of "trusted" SMTP -# clients that have more privileges than "strangers". -# -# In particular, "trusted" SMTP clients are allowed to relay mail -# through Postfix. See the smtpd_recipient_restrictions parameter -# in postconf(5). -# -# You can specify the list of "trusted" network addresses by hand -# or you can let Postfix do it for you (which is the default). -# -# By default (mynetworks_style = subnet), Postfix "trusts" SMTP -# clients in the same IP subnetworks as the local machine. -# On Linux, this does works correctly only with interfaces specified -# with the "ifconfig" command. -# -# Specify "mynetworks_style = class" when Postfix should "trust" SMTP -# clients in the same IP class A/B/C networks as the local machine. -# Don't do this with a dialup site - it would cause Postfix to "trust" -# your entire provider's network. Instead, specify an explicit -# mynetworks list by hand, as described below. -# -# Specify "mynetworks_style = host" when Postfix should "trust" -# only the local machine. -# -#mynetworks_style = class -#mynetworks_style = subnet -#mynetworks_style = host - -# Alternatively, you can specify the mynetworks list by hand, in -# which case Postfix ignores the mynetworks_style setting. -# -# Specify an explicit list of network/netmask patterns, where the -# mask specifies the number of bits in the network part of a host -# address. -# -# You can also specify the absolute pathname of a pattern file instead -# of listing the patterns here. Specify type:table for table-based lookups -# (the value on the table right-hand side is not used). -# -#mynetworks = 168.100.189.0/28, 127.0.0.0/8 -#mynetworks = $config_directory/mynetworks -#mynetworks = hash:/etc/postfix/network_table - - -# The relay_domains parameter restricts what destinations this system will -# relay mail to. See the smtpd_recipient_restrictions description in -# postconf(5) for detailed information. -# -# By default, Postfix relays mail -# - from "trusted" clients (IP address matches $mynetworks) to any destination, -# - from "untrusted" clients to destinations that match $relay_domains or -# subdomains thereof, except addresses with sender-specified routing. -# The default relay_domains value is $mydestination. -# -# In addition to the above, the Postfix SMTP server by default accepts mail -# that Postfix is final destination for: -# - destinations that match $inet_interfaces or $proxy_interfaces, -# - destinations that match $mydestination -# - destinations that match $virtual_alias_domains, -# - destinations that match $virtual_mailbox_domains. -# These destinations do not need to be listed in $relay_domains. -# -# Specify a list of hosts or domains, /file/name patterns or type:name -# lookup tables, separated by commas and/or whitespace. Continue -# long lines by starting the next line with whitespace. A file name -# is replaced by its contents; a type:name table is matched when a -# (parent) domain appears as lookup key. -# -# NOTE: Postfix will not automatically forward mail for domains that -# list this system as their primary or backup MX host. See the -# permit_mx_backup restriction description in postconf(5). -# -#relay_domains = $mydestination - - - -# INTERNET OR INTRANET - -# The relayhost parameter specifies the default host to send mail to -# when no entry is matched in the optional transport(5) table. When -# no relayhost is given, mail is routed directly to the destination. -# -# On an intranet, specify the organizational domain name. If your -# internal DNS uses no MX records, specify the name of the intranet -# gateway host instead. -# -# In the case of SMTP, specify a domain, host, host:port, [host]:port, -# [address] or [address]:port; the form [host] turns off MX lookups. -# -# If you're connected via UUCP, see also the default_transport parameter. -# -#relayhost = $mydomain -#relayhost = [gateway.my.domain] -#relayhost = [mailserver.isp.tld] -#relayhost = uucphost -#relayhost = [an.ip.add.ress] -relayhost = bastion - - -# REJECTING UNKNOWN RELAY USERS -# -# The relay_recipient_maps parameter specifies optional lookup tables -# with all addresses in the domains that match $relay_domains. -# -# If this parameter is defined, then the SMTP server will reject -# mail for unknown relay users. This feature is off by default. -# -# The right-hand side of the lookup tables is conveniently ignored. -# In the left-hand side, specify an @domain.tld wild-card, or specify -# a user(a)domain.tld address. -# -#relay_recipient_maps = hash:/etc/postfix/relay_recipients - -# INPUT RATE CONTROL -# -# The in_flow_delay configuration parameter implements mail input -# flow control. This feature is turned on by default, although it -# still needs further development (it's disabled on SCO UNIX due -# to an SCO bug). -# -# A Postfix process will pause for $in_flow_delay seconds before -# accepting a new message, when the message arrival rate exceeds the -# message delivery rate. With the default 100 SMTP server process -# limit, this limits the mail inflow to 100 messages a second more -# than the number of messages delivered per second. -# -# Specify 0 to disable the feature. Valid delays are 0..10. -# -#in_flow_delay = 1s - -# ADDRESS REWRITING -# -# The ADDRESS_REWRITING_README document gives information about -# address masquerading or other forms of address rewriting including -# username->Firstname.Lastname mapping. - -masquerade_domains = redhat.com -masquerade_exceptions = root apache - -# ADDRESS REDIRECTION (VIRTUAL DOMAIN) -# -# The VIRTUAL_README document gives information about the many forms -# of domain hosting that Postfix supports. - -# "USER HAS MOVED" BOUNCE MESSAGES -# -# See the discussion in the ADDRESS_REWRITING_README document. - -# TRANSPORT MAP -# -# See the discussion in the ADDRESS_REWRITING_README document. - -# ALIAS DATABASE -# -# The alias_maps parameter specifies the list of alias databases used -# by the local delivery agent. The default list is system dependent. -# -# On systems with NIS, the default is to search the local alias -# database, then the NIS alias database. See aliases(5) for syntax -# details. -# -# If you change the alias database, run "postalias /etc/aliases" (or -# wherever your system stores the mail alias file), or simply run -# "newaliases" to build the necessary DBM or DB file. -# -# It will take a minute or so before changes become visible. Use -# "postfix reload" to eliminate the delay. -# -#alias_maps = dbm:/etc/aliases -alias_maps = hash:/etc/aliases, hash:/etc/mailman/aliases -#alias_maps = hash:/etc/aliases, nis:mail.aliases -#alias_maps = netinfo:/aliases - -# The alias_database parameter specifies the alias database(s) that -# are built with "newaliases" or "sendmail -bi". This is a separate -# configuration parameter, because alias_maps (see above) may specify -# tables that are not necessarily all under control by Postfix. -# -#alias_database = dbm:/etc/aliases -#alias_database = dbm:/etc/mail/aliases -alias_database = hash:/etc/aliases -#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases - -# ADDRESS EXTENSIONS (e.g., user+foo) -# -# The recipient_delimiter parameter specifies the separator between -# user names and address extensions (user+foo). See canonical(5), -# local(8), relocated(5) and virtual(5) for the effects this has on -# aliases, canonical, virtual, relocated and .forward file lookups. -# Basically, the software tries user+foo and .forward+foo before -# trying user and .forward. -# -recipient_delimiter = + - -# DELIVERY TO MAILBOX -# -# The home_mailbox parameter specifies the optional pathname of a -# mailbox file relative to a user's home directory. The default -# mailbox file is /var/spool/mail/user or /var/mail/user. Specify -# "Maildir/" for qmail-style delivery (the / is required). -# -#home_mailbox = Mailbox -#home_mailbox = Maildir/ - -# The mail_spool_directory parameter specifies the directory where -# UNIX-style mailboxes are kept. The default setting depends on the -# system type. -# -#mail_spool_directory = /var/mail -#mail_spool_directory = /var/spool/mail - -# The mailbox_command parameter specifies the optional external -# command to use instead of mailbox delivery. The command is run as -# the recipient with proper HOME, SHELL and LOGNAME environment settings. -# Exception: delivery for root is done as $default_user. -# -# Other environment variables of interest: USER (recipient username), -# EXTENSION (address extension), DOMAIN (domain part of address), -# and LOCAL (the address localpart). -# -# Unlike other Postfix configuration parameters, the mailbox_command -# parameter is not subjected to $parameter substitutions. This is to -# make it easier to specify shell syntax (see example below). -# -# Avoid shell meta characters because they will force Postfix to run -# an expensive shell process. Procmail alone is expensive enough. -# -# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN -# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. -# -#mailbox_command = /usr/bin/procmail -#mailbox_command = /some/where/procmail -a "$EXTENSION" - -# The mailbox_transport specifies the optional transport in master.cf -# to use after processing aliases and .forward files. This parameter -# has precedence over the mailbox_command, fallback_transport and -# luser_relay parameters. -# -# Specify a string of the form transport:nexthop, where transport is -# the name of a mail delivery transport defined in master.cf. The -# :nexthop part is optional. For more details see the sample transport -# configuration file. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must update the "local_recipient_maps" setting in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp - -# If using the cyrus-imapd IMAP server deliver local mail to the IMAP -# server using LMTP (Local Mail Transport Protocol), this is prefered -# over the older cyrus deliver program by setting the -# mailbox_transport as below: -# -# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp -# -# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via -# these settings. -# -# local_destination_recipient_limit = 300 -# local_destination_concurrency_limit = 5 -# -# Of course you should adjust these settings as appropriate for the -# capacity of the hardware you are using. The recipient limit setting -# can be used to take advantage of the single instance message store -# capability of Cyrus. The concurrency limit can be used to control -# how many simultaneous LMTP sessions will be permitted to the Cyrus -# message store. -# -# To use the old cyrus deliver program you have to set: -#mailbox_transport = cyrus - -# The fallback_transport specifies the optional transport in master.cf -# to use for recipients that are not found in the UNIX passwd database. -# This parameter has precedence over the luser_relay parameter. -# -# Specify a string of the form transport:nexthop, where transport is -# the name of a mail delivery transport defined in master.cf. The -# :nexthop part is optional. For more details see the sample transport -# configuration file. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must update the "local_recipient_maps" setting in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp -#fallback_transport = - -#transport_maps = hash:/etc/postfix/transport -# The luser_relay parameter specifies an optional destination address -# for unknown recipients. By default, mail for unknown@$mydestination, -# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned -# as undeliverable. -# -# The following expansions are done on luser_relay: $user (recipient -# username), $shell (recipient shell), $home (recipient home directory), -# $recipient (full recipient address), $extension (recipient address -# extension), $domain (recipient domain), $local (entire recipient -# localpart), $recipient_delimiter. Specify ${name?value} or -# ${name:value} to expand value only when $name does (does not) exist. -# -# luser_relay works only for the default Postfix local delivery agent. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must specify "local_recipient_maps =" (i.e. empty) in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#luser_relay = $user(a)other.host -#luser_relay = $local(a)other.host -#luser_relay = admin+$local - -# JUNK MAIL CONTROLS -# -# The controls listed here are only a very small subset. The file -# SMTPD_ACCESS_README provides an overview. - -# The header_checks parameter specifies an optional table with patterns -# that each logical message header is matched against, including -# headers that span multiple physical lines. -# -# By default, these patterns also apply to MIME headers and to the -# headers of attached messages. With older Postfix versions, MIME and -# attached message headers were treated as body text. -# -# For details, see "man header_checks". -# -header_checks = regexp:/etc/postfix/header_checks - -# FAST ETRN SERVICE -# -# Postfix maintains per-destination logfiles with information about -# deferred mail, so that mail can be flushed quickly with the SMTP -# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". -# See the ETRN_README document for a detailed description. -# -# The fast_flush_domains parameter controls what destinations are -# eligible for this service. By default, they are all domains that -# this server is willing to relay mail to. -# -#fast_flush_domains = $relay_domains - -# SHOW SOFTWARE VERSION OR NOT -# -# The smtpd_banner parameter specifies the text that follows the 220 -# code in the SMTP server's greeting banner. Some people like to see -# the mail version advertised. By default, Postfix shows no version. -# -# You MUST specify $myhostname at the start of the text. That is an -# RFC requirement. Postfix itself does not care. -# -#smtpd_banner = $myhostname ESMTP $mail_name -#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) - -# PARALLEL DELIVERY TO THE SAME DESTINATION -# -# How many parallel deliveries to the same user or domain? With local -# delivery, it does not make sense to do massively parallel delivery -# to the same user, because mailbox updates must happen sequentially, -# and expensive pipelines in .forward files can cause disasters when -# too many are run at the same time. With SMTP deliveries, 10 -# simultaneous connections to the same domain could be sufficient to -# raise eyebrows. -# -# Each message delivery transport has its XXX_destination_concurrency_limit -# parameter. The default is $default_destination_concurrency_limit for -# most delivery transports. For the local delivery agent the default is 2. - -#local_destination_concurrency_limit = 2 -#default_destination_concurrency_limit = 20 - -# DEBUGGING CONTROL -# -# The debug_peer_level parameter specifies the increment in verbose -# logging level when an SMTP client or server host name or address -# matches a pattern in the debug_peer_list parameter. -# -debug_peer_level = 2 - -# The debug_peer_list parameter specifies an optional list of domain -# or network patterns, /file/name patterns or type:name tables. When -# an SMTP client or server host name or address matches a pattern, -# increase the verbose logging level by the amount specified in the -# debug_peer_level parameter. -# -#debug_peer_list = 127.0.0.1 -#debug_peer_list = some.domain - -# The debugger_command specifies the external command that is executed -# when a Postfix daemon program is run with the -D option. -# -# Use "command .. & sleep 5" so that the debugger can attach before -# the process marches on. If you use an X-based debugger, be sure to -# set up your XAUTHORITY environment variable before starting Postfix. -# -debugger_command = - PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin - xxgdb $daemon_directory/$process_name $process_id & sleep 5 - -# If you can't use X, use this to capture the call stack when a -# daemon crashes. The result is in a file in the configuration -# directory, and is named after the process name and the process ID. -# -# debugger_command = -# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; -# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 -# >$config_directory/$process_name.$process_id.log & sleep 5 -# -# Another possibility is to run gdb under a detached screen session. -# To attach to the screen sesssion, su root and run "screen -r -# <id_string>" where <id_string> uniquely matches one of the detached -# sessions (from "screen -list"). -# -# debugger_command = -# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen -# -dmS $process_name gdb $daemon_directory/$process_name -# $process_id & sleep 1 - -# INSTALL-TIME CONFIGURATION INFORMATION -# -# The following parameters are used when installing a new Postfix version. -# -# sendmail_path: The full pathname of the Postfix sendmail command. -# This is the Sendmail-compatible mail posting interface. -# -sendmail_path = /usr/sbin/sendmail.postfix - -# newaliases_path: The full pathname of the Postfix newaliases command. -# This is the Sendmail-compatible command to build alias databases. -# -newaliases_path = /usr/bin/newaliases.postfix - -# mailq_path: The full pathname of the Postfix mailq command. This -# is the Sendmail-compatible mail queue listing command. -# -mailq_path = /usr/bin/mailq.postfix - -# setgid_group: The group for mail submission and queue management -# commands. This must be a group name with a numerical group ID that -# is not shared with other accounts, not even with the Postfix account. -# -setgid_group = postdrop - -# html_directory: The location of the Postfix HTML documentation. -# -html_directory = no - -# manpage_directory: The location of the Postfix on-line manual pages. -# -manpage_directory = /usr/share/man - -# sample_directory: The location of the Postfix sample configuration files. -# This parameter is obsolete as of Postfix 2.1. -# -sample_directory = /usr/share/doc/postfix-2.4.5/samples - -# readme_directory: The location of the Postfix README files. -# -readme_directory = /usr/share/doc/postfix-2.4.5/README_FILES - -# add this to new postfix to get it to add proper message-id and other -# headers to outgoing emails via the gateway. - - -message_size_limit = 20971520 -- 1.7.2.1

11 years, 3 months

2
3
0 / 0

[PATCH] make hosted01 and hosted02 main.cf be the same - b/c apparently they haven't been for a while :(

by Seth Vidal

From: Seth Vidal <skvidal(a)fedoraproject.org> --- .../main.cf/main.cf.hosted02.fedoraproject.org | 687 ++++++++++++++++++++ .../main.cf/main.cf.hosted03.fedoraproject.org | 687 -------------------- .../main.cf/main.cf.hosted1.fedoraproject.org | 687 -------------------- 3 files changed, 687 insertions(+), 1374 deletions(-) create mode 100644 modules/postfix/files/main.cf/main.cf.hosted02.fedoraproject.org delete mode 100644 modules/postfix/files/main.cf/main.cf.hosted03.fedoraproject.org delete mode 100644 modules/postfix/files/main.cf/main.cf.hosted1.fedoraproject.org diff --git a/modules/postfix/files/main.cf/main.cf.hosted02.fedoraproject.org b/modules/postfix/files/main.cf/main.cf.hosted02.fedoraproject.org new file mode 100644 index 0000000..77da22b --- /dev/null +++ b/modules/postfix/files/main.cf/main.cf.hosted02.fedoraproject.org @@ -0,0 +1,687 @@ +# "false" +# Global Postfix configuration file. This file lists only a subset +# of all parameters. For the syntax, and for a complete parameter +# list, see the postconf(5) manual page (command: "man 5 postconf"). +# +# For common configuration examples, see BASIC_CONFIGURATION_README +# and STANDARD_CONFIGURATION_README. To find these documents, use +# the command "postconf html_directory readme_directory", or go to +# http://www.postfix.org/. +# +# For best results, change no more than 2-3 parameters at a time, +# and test if Postfix still works after every change. + +# SOFT BOUNCE +# +# The soft_bounce parameter provides a limited safety net for +# testing. When soft_bounce is enabled, mail will remain queued that +# would otherwise bounce. This parameter disables locally-generated +# bounces, and prevents the SMTP server from rejecting mail permanently +# (by changing 5xx replies into 4xx replies). However, soft_bounce +# is no cure for address rewriting mistakes or mail routing mistakes. +# +#soft_bounce = no + +# LOCAL PATHNAME INFORMATION +# +# The queue_directory specifies the location of the Postfix queue. +# This is also the root directory of Postfix daemons that run chrooted. +# See the files in examples/chroot-setup for setting up Postfix chroot +# environments on different UNIX systems. +# +queue_directory = /var/spool/postfix + +# The command_directory parameter specifies the location of all +# postXXX commands. +# +command_directory = /usr/sbin + +# The daemon_directory parameter specifies the location of all Postfix +# daemon programs (i.e. programs listed in the master.cf file). This +# directory must be owned by root. +# +daemon_directory = /usr/libexec/postfix + +# QUEUE AND PROCESS OWNERSHIP +# +# The mail_owner parameter specifies the owner of the Postfix queue +# and of most Postfix daemon processes. Specify the name of a user +# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS +# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In +# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED +# USER. +# +mail_owner = postfix + +# The default_privs parameter specifies the default rights used by +# the local delivery agent for delivery to external file or command. +# These rights are used in the absence of a recipient user context. +# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. +# +#default_privs = nobody + +# INTERNET HOST AND DOMAIN NAMES +# +# The myhostname parameter specifies the internet hostname of this +# mail system. The default is to use the fully-qualified domain name +# from gethostname(). $myhostname is used as a default value for many +# other configuration parameters. +# +#myhostname = host.domain.tld +#myhostname = virtual.domain.tld + +# The mydomain parameter specifies the local internet domain name. +# The default is to use $myhostname minus the first component. +# $mydomain is used as a default value for many other configuration +# parameters. +# +#mydomain = domain.tld + +# SENDING MAIL +# +# The myorigin parameter specifies the domain that locally-posted +# mail appears to come from. The default is to append $myhostname, +# which is fine for small sites. If you run a domain with multiple +# machines, you should (1) change this to $mydomain and (2) set up +# a domain-wide alias database that aliases each user to +# user(a)that.users.mailhost. +# +# For the sake of consistency between sender and recipient addresses, +# myorigin also specifies the default domain name that is appended +# to recipient addresses that have no @domain part. +# +#myorigin = $myhostname +#myorigin = $mydomain + +myhostname = fedorahosted.org +myorigin = fedorahosted.org + +# RECEIVING MAIL + +# The inet_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on. By default, +# the software claims all active interfaces on the machine. The +# parameter also controls delivery of mail to user(a)[ip.address]. +# +# See also the proxy_interfaces parameter, for network addresses that +# are forwarded to us via a proxy or network address translator. +# +# Note: you need to stop/start Postfix when this parameter changes. +# +#inet_interfaces = all +#inet_interfaces = $myhostname +#inet_interfaces = $myhostname, localhost +inet_interfaces = all + +# The proxy_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on by way of a +# proxy or network address translation unit. This setting extends +# the address list specified with the inet_interfaces parameter. +# +# You must specify your proxy/NAT addresses when your system is a +# backup MX host for other domains, otherwise mail delivery loops +# will happen when the primary MX host is down. +# +#proxy_interfaces = +#proxy_interfaces = 1.2.3.4 + +# The mydestination parameter specifies the list of domains that this +# machine considers itself the final destination for. +# +# These domains are routed to the delivery agent specified with the +# local_transport parameter setting. By default, that is the UNIX +# compatible delivery agent that lookups all recipients in /etc/passwd +# and /etc/aliases or their equivalent. +# +# The default is $myhostname + localhost.$mydomain. On a mail domain +# gateway, you should also include $mydomain. +# +# Do not specify the names of virtual domains - those domains are +# specified elsewhere (see VIRTUAL_README). +# +# Do not specify the names of domains that this machine is backup MX +# host for. Specify those names via the relay_domains settings for +# the SMTP server, or use permit_mx_backup if you are lazy (see +# STANDARD_CONFIGURATION_README). +# +# The local machine is always the final destination for mail addressed +# to user(a)[the.net.work.address] of an interface that the mail system +# receives mail on (see the inet_interfaces parameter). +# +# Specify a list of host or domain names, /file/name or type:table +# patterns, separated by commas and/or whitespace. A /file/name +# pattern is replaced by its contents; a type:table is matched when +# a name matches a lookup key (the right-hand side is ignored). +# Continue long lines by starting the next line with whitespace. +# +# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". +# +mydestination = $myhostname, localhost.$mydomain, fedora.redhat.com, localhost, fedorahosted.org +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, +# mail.$mydomain, www.$mydomain, ftp.$mydomain + +# REJECTING MAIL FOR UNKNOWN LOCAL USERS +# +# The local_recipient_maps parameter specifies optional lookup tables +# with all names or addresses of users that are local with respect +# to $mydestination, $inet_interfaces or $proxy_interfaces. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown local users. This parameter is defined by default. +# +# To turn off local recipient checking in the SMTP server, specify +# local_recipient_maps = (i.e. empty). +# +# The default setting assumes that you use the default Postfix local +# delivery agent for local delivery. You need to update the +# local_recipient_maps setting if: +# +# - You define $mydestination domain recipients in files other than +# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. +# For example, you define $mydestination domain recipients in +# the $virtual_mailbox_maps files. +# +# - You redefine the local delivery agent in master.cf. +# +# - You redefine the "local_transport" setting in main.cf. +# +# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" +# feature of the Postfix local delivery agent (see local(8)). +# +# Details are described in the LOCAL_RECIPIENT_README file. +# +# Beware: if the Postfix SMTP server runs chrooted, you probably have +# to access the passwd file via the proxymap service, in order to +# overcome chroot restrictions. The alternative, having a copy of +# the system passwd file in the chroot jail is just not practical. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify a bare username, an @domain.tld +# wild-card, or specify a user(a)domain.tld address. +# +local_recipient_maps = $alias_maps +#local_recipient_maps = unix:passwd.byname $alias_maps +#local_recipient_maps = proxy:unix:passwd.byname $alias_maps +#local_recipient_maps = + +# The unknown_local_recipient_reject_code specifies the SMTP server +# response code when a recipient domain matches $mydestination or +# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty +# and the recipient address or address local-part is not found. +# +# The default setting is 550 (reject mail) but it is safer to start +# with 450 (try again later) until you are certain that your +# local_recipient_maps settings are OK. +# +unknown_local_recipient_reject_code = 550 + +# TRUST AND RELAY CONTROL + +# The mynetworks parameter specifies the list of "trusted" SMTP +# clients that have more privileges than "strangers". +# +# In particular, "trusted" SMTP clients are allowed to relay mail +# through Postfix. See the smtpd_recipient_restrictions parameter +# in postconf(5). +# +# You can specify the list of "trusted" network addresses by hand +# or you can let Postfix do it for you (which is the default). +# +# By default (mynetworks_style = subnet), Postfix "trusts" SMTP +# clients in the same IP subnetworks as the local machine. +# On Linux, this does works correctly only with interfaces specified +# with the "ifconfig" command. +# +# Specify "mynetworks_style = class" when Postfix should "trust" SMTP +# clients in the same IP class A/B/C networks as the local machine. +# Don't do this with a dialup site - it would cause Postfix to "trust" +# your entire provider's network. Instead, specify an explicit +# mynetworks list by hand, as described below. +# +# Specify "mynetworks_style = host" when Postfix should "trust" +# only the local machine. +# +#mynetworks_style = class +#mynetworks_style = subnet +#mynetworks_style = host + +# Alternatively, you can specify the mynetworks list by hand, in +# which case Postfix ignores the mynetworks_style setting. +# +# Specify an explicit list of network/netmask patterns, where the +# mask specifies the number of bits in the network part of a host +# address. +# +# You can also specify the absolute pathname of a pattern file instead +# of listing the patterns here. Specify type:table for table-based lookups +# (the value on the table right-hand side is not used). +# +#mynetworks = 168.100.189.0/28, 127.0.0.0/8 +#mynetworks = $config_directory/mynetworks +#mynetworks = hash:/etc/postfix/network_table + + +# The relay_domains parameter restricts what destinations this system will +# relay mail to. See the smtpd_recipient_restrictions description in +# postconf(5) for detailed information. +# +# By default, Postfix relays mail +# - from "trusted" clients (IP address matches $mynetworks) to any destination, +# - from "untrusted" clients to destinations that match $relay_domains or +# subdomains thereof, except addresses with sender-specified routing. +# The default relay_domains value is $mydestination. +# +# In addition to the above, the Postfix SMTP server by default accepts mail +# that Postfix is final destination for: +# - destinations that match $inet_interfaces or $proxy_interfaces, +# - destinations that match $mydestination +# - destinations that match $virtual_alias_domains, +# - destinations that match $virtual_mailbox_domains. +# These destinations do not need to be listed in $relay_domains. +# +# Specify a list of hosts or domains, /file/name patterns or type:name +# lookup tables, separated by commas and/or whitespace. Continue +# long lines by starting the next line with whitespace. A file name +# is replaced by its contents; a type:name table is matched when a +# (parent) domain appears as lookup key. +# +# NOTE: Postfix will not automatically forward mail for domains that +# list this system as their primary or backup MX host. See the +# permit_mx_backup restriction description in postconf(5). +# +#relay_domains = $mydestination + + + +# INTERNET OR INTRANET + +# The relayhost parameter specifies the default host to send mail to +# when no entry is matched in the optional transport(5) table. When +# no relayhost is given, mail is routed directly to the destination. +# +# On an intranet, specify the organizational domain name. If your +# internal DNS uses no MX records, specify the name of the intranet +# gateway host instead. +# +# In the case of SMTP, specify a domain, host, host:port, [host]:port, +# [address] or [address]:port; the form [host] turns off MX lookups. +# +# If you're connected via UUCP, see also the default_transport parameter. +# +#relayhost = $mydomain +#relayhost = [gateway.my.domain] +#relayhost = [mailserver.isp.tld] +#relayhost = uucphost +#relayhost = [an.ip.add.ress] +relayhost = bastion + + +# REJECTING UNKNOWN RELAY USERS +# +# The relay_recipient_maps parameter specifies optional lookup tables +# with all addresses in the domains that match $relay_domains. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown relay users. This feature is off by default. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify an @domain.tld wild-card, or specify +# a user(a)domain.tld address. +# +#relay_recipient_maps = hash:/etc/postfix/relay_recipients + +# INPUT RATE CONTROL +# +# The in_flow_delay configuration parameter implements mail input +# flow control. This feature is turned on by default, although it +# still needs further development (it's disabled on SCO UNIX due +# to an SCO bug). +# +# A Postfix process will pause for $in_flow_delay seconds before +# accepting a new message, when the message arrival rate exceeds the +# message delivery rate. With the default 100 SMTP server process +# limit, this limits the mail inflow to 100 messages a second more +# than the number of messages delivered per second. +# +# Specify 0 to disable the feature. Valid delays are 0..10. +# +#in_flow_delay = 1s + +# ADDRESS REWRITING +# +# The ADDRESS_REWRITING_README document gives information about +# address masquerading or other forms of address rewriting including +# username->Firstname.Lastname mapping. + +masquerade_domains = redhat.com +masquerade_exceptions = root apache + +# ADDRESS REDIRECTION (VIRTUAL DOMAIN) +# +# The VIRTUAL_README document gives information about the many forms +# of domain hosting that Postfix supports. + +# "USER HAS MOVED" BOUNCE MESSAGES +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# TRANSPORT MAP +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# ALIAS DATABASE +# +# The alias_maps parameter specifies the list of alias databases used +# by the local delivery agent. The default list is system dependent. +# +# On systems with NIS, the default is to search the local alias +# database, then the NIS alias database. See aliases(5) for syntax +# details. +# +# If you change the alias database, run "postalias /etc/aliases" (or +# wherever your system stores the mail alias file), or simply run +# "newaliases" to build the necessary DBM or DB file. +# +# It will take a minute or so before changes become visible. Use +# "postfix reload" to eliminate the delay. +# +#alias_maps = dbm:/etc/aliases +alias_maps = hash:/etc/aliases +#alias_maps = hash:/etc/aliases, nis:mail.aliases +#alias_maps = netinfo:/aliases + +# The alias_database parameter specifies the alias database(s) that +# are built with "newaliases" or "sendmail -bi". This is a separate +# configuration parameter, because alias_maps (see above) may specify +# tables that are not necessarily all under control by Postfix. +# +#alias_database = dbm:/etc/aliases +#alias_database = dbm:/etc/mail/aliases +alias_database = hash:/etc/aliases +#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases + +# ADDRESS EXTENSIONS (e.g., user+foo) +# +# The recipient_delimiter parameter specifies the separator between +# user names and address extensions (user+foo). See canonical(5), +# local(8), relocated(5) and virtual(5) for the effects this has on +# aliases, canonical, virtual, relocated and .forward file lookups. +# Basically, the software tries user+foo and .forward+foo before +# trying user and .forward. +# +recipient_delimiter = + + +# DELIVERY TO MAILBOX +# +# The home_mailbox parameter specifies the optional pathname of a +# mailbox file relative to a user's home directory. The default +# mailbox file is /var/spool/mail/user or /var/mail/user. Specify +# "Maildir/" for qmail-style delivery (the / is required). +# +#home_mailbox = Mailbox +#home_mailbox = Maildir/ + +# The mail_spool_directory parameter specifies the directory where +# UNIX-style mailboxes are kept. The default setting depends on the +# system type. +# +#mail_spool_directory = /var/mail +#mail_spool_directory = /var/spool/mail + +# The mailbox_command parameter specifies the optional external +# command to use instead of mailbox delivery. The command is run as +# the recipient with proper HOME, SHELL and LOGNAME environment settings. +# Exception: delivery for root is done as $default_user. +# +# Other environment variables of interest: USER (recipient username), +# EXTENSION (address extension), DOMAIN (domain part of address), +# and LOCAL (the address localpart). +# +# Unlike other Postfix configuration parameters, the mailbox_command +# parameter is not subjected to $parameter substitutions. This is to +# make it easier to specify shell syntax (see example below). +# +# Avoid shell meta characters because they will force Postfix to run +# an expensive shell process. Procmail alone is expensive enough. +# +# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN +# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. +# +#mailbox_command = /usr/bin/procmail +#mailbox_command = /some/where/procmail -a "$EXTENSION" + +# The mailbox_transport specifies the optional transport in master.cf +# to use after processing aliases and .forward files. This parameter +# has precedence over the mailbox_command, fallback_transport and +# luser_relay parameters. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp + +# If using the cyrus-imapd IMAP server deliver local mail to the IMAP +# server using LMTP (Local Mail Transport Protocol), this is prefered +# over the older cyrus deliver program by setting the +# mailbox_transport as below: +# +# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp +# +# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via +# these settings. +# +# local_destination_recipient_limit = 300 +# local_destination_concurrency_limit = 5 +# +# Of course you should adjust these settings as appropriate for the +# capacity of the hardware you are using. The recipient limit setting +# can be used to take advantage of the single instance message store +# capability of Cyrus. The concurrency limit can be used to control +# how many simultaneous LMTP sessions will be permitted to the Cyrus +# message store. +# +# To use the old cyrus deliver program you have to set: +#mailbox_transport = cyrus + +# The fallback_transport specifies the optional transport in master.cf +# to use for recipients that are not found in the UNIX passwd database. +# This parameter has precedence over the luser_relay parameter. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp +#fallback_transport = + +#transport_maps = hash:/etc/postfix/transport +# The luser_relay parameter specifies an optional destination address +# for unknown recipients. By default, mail for unknown@$mydestination, +# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned +# as undeliverable. +# +# The following expansions are done on luser_relay: $user (recipient +# username), $shell (recipient shell), $home (recipient home directory), +# $recipient (full recipient address), $extension (recipient address +# extension), $domain (recipient domain), $local (entire recipient +# localpart), $recipient_delimiter. Specify ${name?value} or +# ${name:value} to expand value only when $name does (does not) exist. +# +# luser_relay works only for the default Postfix local delivery agent. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must specify "local_recipient_maps =" (i.e. empty) in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#luser_relay = $user(a)other.host +#luser_relay = $local(a)other.host +#luser_relay = admin+$local + +# JUNK MAIL CONTROLS +# +# The controls listed here are only a very small subset. The file +# SMTPD_ACCESS_README provides an overview. + +# The header_checks parameter specifies an optional table with patterns +# that each logical message header is matched against, including +# headers that span multiple physical lines. +# +# By default, these patterns also apply to MIME headers and to the +# headers of attached messages. With older Postfix versions, MIME and +# attached message headers were treated as body text. +# +# For details, see "man header_checks". +# +header_checks = regexp:/etc/postfix/header_checks + +# FAST ETRN SERVICE +# +# Postfix maintains per-destination logfiles with information about +# deferred mail, so that mail can be flushed quickly with the SMTP +# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". +# See the ETRN_README document for a detailed description. +# +# The fast_flush_domains parameter controls what destinations are +# eligible for this service. By default, they are all domains that +# this server is willing to relay mail to. +# +#fast_flush_domains = $relay_domains + +# SHOW SOFTWARE VERSION OR NOT +# +# The smtpd_banner parameter specifies the text that follows the 220 +# code in the SMTP server's greeting banner. Some people like to see +# the mail version advertised. By default, Postfix shows no version. +# +# You MUST specify $myhostname at the start of the text. That is an +# RFC requirement. Postfix itself does not care. +# +#smtpd_banner = $myhostname ESMTP $mail_name +#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) + +# PARALLEL DELIVERY TO THE SAME DESTINATION +# +# How many parallel deliveries to the same user or domain? With local +# delivery, it does not make sense to do massively parallel delivery +# to the same user, because mailbox updates must happen sequentially, +# and expensive pipelines in .forward files can cause disasters when +# too many are run at the same time. With SMTP deliveries, 10 +# simultaneous connections to the same domain could be sufficient to +# raise eyebrows. +# +# Each message delivery transport has its XXX_destination_concurrency_limit +# parameter. The default is $default_destination_concurrency_limit for +# most delivery transports. For the local delivery agent the default is 2. + +#local_destination_concurrency_limit = 2 +#default_destination_concurrency_limit = 20 + +# DEBUGGING CONTROL +# +# The debug_peer_level parameter specifies the increment in verbose +# logging level when an SMTP client or server host name or address +# matches a pattern in the debug_peer_list parameter. +# +debug_peer_level = 2 + +# The debug_peer_list parameter specifies an optional list of domain +# or network patterns, /file/name patterns or type:name tables. When +# an SMTP client or server host name or address matches a pattern, +# increase the verbose logging level by the amount specified in the +# debug_peer_level parameter. +# +#debug_peer_list = 127.0.0.1 +#debug_peer_list = some.domain + +# The debugger_command specifies the external command that is executed +# when a Postfix daemon program is run with the -D option. +# +# Use "command .. & sleep 5" so that the debugger can attach before +# the process marches on. If you use an X-based debugger, be sure to +# set up your XAUTHORITY environment variable before starting Postfix. +# +debugger_command = + PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin + xxgdb $daemon_directory/$process_name $process_id & sleep 5 + +# If you can't use X, use this to capture the call stack when a +# daemon crashes. The result is in a file in the configuration +# directory, and is named after the process name and the process ID. +# +# debugger_command = +# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; +# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 +# >$config_directory/$process_name.$process_id.log & sleep 5 +# +# Another possibility is to run gdb under a detached screen session. +# To attach to the screen sesssion, su root and run "screen -r +# <id_string>" where <id_string> uniquely matches one of the detached +# sessions (from "screen -list"). +# +# debugger_command = +# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen +# -dmS $process_name gdb $daemon_directory/$process_name +# $process_id & sleep 1 + +# INSTALL-TIME CONFIGURATION INFORMATION +# +# The following parameters are used when installing a new Postfix version. +# +# sendmail_path: The full pathname of the Postfix sendmail command. +# This is the Sendmail-compatible mail posting interface. +# +sendmail_path = /usr/sbin/sendmail.postfix + +# newaliases_path: The full pathname of the Postfix newaliases command. +# This is the Sendmail-compatible command to build alias databases. +# +newaliases_path = /usr/bin/newaliases.postfix + +# mailq_path: The full pathname of the Postfix mailq command. This +# is the Sendmail-compatible mail queue listing command. +# +mailq_path = /usr/bin/mailq.postfix + +# setgid_group: The group for mail submission and queue management +# commands. This must be a group name with a numerical group ID that +# is not shared with other accounts, not even with the Postfix account. +# +setgid_group = postdrop + +# html_directory: The location of the Postfix HTML documentation. +# +html_directory = no + +# manpage_directory: The location of the Postfix on-line manual pages. +# +manpage_directory = /usr/share/man + +# sample_directory: The location of the Postfix sample configuration files. +# This parameter is obsolete as of Postfix 2.1. +# +sample_directory = /usr/share/doc/postfix-2.4.5/samples + +# readme_directory: The location of the Postfix README files. +# +readme_directory = /usr/share/doc/postfix-2.4.5/README_FILES + +# add this to new postfix to get it to add proper message-id and other +# headers to outgoing emails via the gateway. + + +message_size_limit = 20971520 diff --git a/modules/postfix/files/main.cf/main.cf.hosted03.fedoraproject.org b/modules/postfix/files/main.cf/main.cf.hosted03.fedoraproject.org deleted file mode 100644 index f174c55..0000000 --- a/modules/postfix/files/main.cf/main.cf.hosted03.fedoraproject.org +++ /dev/null @@ -1,687 +0,0 @@ -# "false" -# Global Postfix configuration file. This file lists only a subset -# of all parameters. For the syntax, and for a complete parameter -# list, see the postconf(5) manual page (command: "man 5 postconf"). -# -# For common configuration examples, see BASIC_CONFIGURATION_README -# and STANDARD_CONFIGURATION_README. To find these documents, use -# the command "postconf html_directory readme_directory", or go to -# http://www.postfix.org/. -# -# For best results, change no more than 2-3 parameters at a time, -# and test if Postfix still works after every change. - -# SOFT BOUNCE -# -# The soft_bounce parameter provides a limited safety net for -# testing. When soft_bounce is enabled, mail will remain queued that -# would otherwise bounce. This parameter disables locally-generated -# bounces, and prevents the SMTP server from rejecting mail permanently -# (by changing 5xx replies into 4xx replies). However, soft_bounce -# is no cure for address rewriting mistakes or mail routing mistakes. -# -#soft_bounce = no - -# LOCAL PATHNAME INFORMATION -# -# The queue_directory specifies the location of the Postfix queue. -# This is also the root directory of Postfix daemons that run chrooted. -# See the files in examples/chroot-setup for setting up Postfix chroot -# environments on different UNIX systems. -# -queue_directory = /var/spool/postfix - -# The command_directory parameter specifies the location of all -# postXXX commands. -# -command_directory = /usr/sbin - -# The daemon_directory parameter specifies the location of all Postfix -# daemon programs (i.e. programs listed in the master.cf file). This -# directory must be owned by root. -# -daemon_directory = /usr/libexec/postfix - -# QUEUE AND PROCESS OWNERSHIP -# -# The mail_owner parameter specifies the owner of the Postfix queue -# and of most Postfix daemon processes. Specify the name of a user -# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS -# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In -# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED -# USER. -# -mail_owner = postfix - -# The default_privs parameter specifies the default rights used by -# the local delivery agent for delivery to external file or command. -# These rights are used in the absence of a recipient user context. -# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. -# -#default_privs = nobody - -# INTERNET HOST AND DOMAIN NAMES -# -# The myhostname parameter specifies the internet hostname of this -# mail system. The default is to use the fully-qualified domain name -# from gethostname(). $myhostname is used as a default value for many -# other configuration parameters. -# -#myhostname = host.domain.tld -#myhostname = virtual.domain.tld - -# The mydomain parameter specifies the local internet domain name. -# The default is to use $myhostname minus the first component. -# $mydomain is used as a default value for many other configuration -# parameters. -# -#mydomain = domain.tld - -# SENDING MAIL -# -# The myorigin parameter specifies the domain that locally-posted -# mail appears to come from. The default is to append $myhostname, -# which is fine for small sites. If you run a domain with multiple -# machines, you should (1) change this to $mydomain and (2) set up -# a domain-wide alias database that aliases each user to -# user(a)that.users.mailhost. -# -# For the sake of consistency between sender and recipient addresses, -# myorigin also specifies the default domain name that is appended -# to recipient addresses that have no @domain part. -# -#myorigin = $myhostname -#myorigin = $mydomain - -myhostname = fedorahosted.org -myorigin = fedorahosted.org - -# RECEIVING MAIL - -# The inet_interfaces parameter specifies the network interface -# addresses that this mail system receives mail on. By default, -# the software claims all active interfaces on the machine. The -# parameter also controls delivery of mail to user(a)[ip.address]. -# -# See also the proxy_interfaces parameter, for network addresses that -# are forwarded to us via a proxy or network address translator. -# -# Note: you need to stop/start Postfix when this parameter changes. -# -#inet_interfaces = all -#inet_interfaces = $myhostname -#inet_interfaces = $myhostname, localhost -inet_interfaces = all - -# The proxy_interfaces parameter specifies the network interface -# addresses that this mail system receives mail on by way of a -# proxy or network address translation unit. This setting extends -# the address list specified with the inet_interfaces parameter. -# -# You must specify your proxy/NAT addresses when your system is a -# backup MX host for other domains, otherwise mail delivery loops -# will happen when the primary MX host is down. -# -#proxy_interfaces = -#proxy_interfaces = 1.2.3.4 - -# The mydestination parameter specifies the list of domains that this -# machine considers itself the final destination for. -# -# These domains are routed to the delivery agent specified with the -# local_transport parameter setting. By default, that is the UNIX -# compatible delivery agent that lookups all recipients in /etc/passwd -# and /etc/aliases or their equivalent. -# -# The default is $myhostname + localhost.$mydomain. On a mail domain -# gateway, you should also include $mydomain. -# -# Do not specify the names of virtual domains - those domains are -# specified elsewhere (see VIRTUAL_README). -# -# Do not specify the names of domains that this machine is backup MX -# host for. Specify those names via the relay_domains settings for -# the SMTP server, or use permit_mx_backup if you are lazy (see -# STANDARD_CONFIGURATION_README). -# -# The local machine is always the final destination for mail addressed -# to user(a)[the.net.work.address] of an interface that the mail system -# receives mail on (see the inet_interfaces parameter). -# -# Specify a list of host or domain names, /file/name or type:table -# patterns, separated by commas and/or whitespace. A /file/name -# pattern is replaced by its contents; a type:table is matched when -# a name matches a lookup key (the right-hand side is ignored). -# Continue long lines by starting the next line with whitespace. -# -# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". -# -mydestination = $myhostname, localhost.$mydomain, fedora.redhat.com, localhost, fedorahosted.org -#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain -#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, -# mail.$mydomain, www.$mydomain, ftp.$mydomain - -# REJECTING MAIL FOR UNKNOWN LOCAL USERS -# -# The local_recipient_maps parameter specifies optional lookup tables -# with all names or addresses of users that are local with respect -# to $mydestination, $inet_interfaces or $proxy_interfaces. -# -# If this parameter is defined, then the SMTP server will reject -# mail for unknown local users. This parameter is defined by default. -# -# To turn off local recipient checking in the SMTP server, specify -# local_recipient_maps = (i.e. empty). -# -# The default setting assumes that you use the default Postfix local -# delivery agent for local delivery. You need to update the -# local_recipient_maps setting if: -# -# - You define $mydestination domain recipients in files other than -# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. -# For example, you define $mydestination domain recipients in -# the $virtual_mailbox_maps files. -# -# - You redefine the local delivery agent in master.cf. -# -# - You redefine the "local_transport" setting in main.cf. -# -# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" -# feature of the Postfix local delivery agent (see local(8)). -# -# Details are described in the LOCAL_RECIPIENT_README file. -# -# Beware: if the Postfix SMTP server runs chrooted, you probably have -# to access the passwd file via the proxymap service, in order to -# overcome chroot restrictions. The alternative, having a copy of -# the system passwd file in the chroot jail is just not practical. -# -# The right-hand side of the lookup tables is conveniently ignored. -# In the left-hand side, specify a bare username, an @domain.tld -# wild-card, or specify a user(a)domain.tld address. -# -local_recipient_maps = $alias_maps -#local_recipient_maps = unix:passwd.byname $alias_maps -#local_recipient_maps = proxy:unix:passwd.byname $alias_maps -#local_recipient_maps = - -# The unknown_local_recipient_reject_code specifies the SMTP server -# response code when a recipient domain matches $mydestination or -# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty -# and the recipient address or address local-part is not found. -# -# The default setting is 550 (reject mail) but it is safer to start -# with 450 (try again later) until you are certain that your -# local_recipient_maps settings are OK. -# -unknown_local_recipient_reject_code = 550 - -# TRUST AND RELAY CONTROL - -# The mynetworks parameter specifies the list of "trusted" SMTP -# clients that have more privileges than "strangers". -# -# In particular, "trusted" SMTP clients are allowed to relay mail -# through Postfix. See the smtpd_recipient_restrictions parameter -# in postconf(5). -# -# You can specify the list of "trusted" network addresses by hand -# or you can let Postfix do it for you (which is the default). -# -# By default (mynetworks_style = subnet), Postfix "trusts" SMTP -# clients in the same IP subnetworks as the local machine. -# On Linux, this does works correctly only with interfaces specified -# with the "ifconfig" command. -# -# Specify "mynetworks_style = class" when Postfix should "trust" SMTP -# clients in the same IP class A/B/C networks as the local machine. -# Don't do this with a dialup site - it would cause Postfix to "trust" -# your entire provider's network. Instead, specify an explicit -# mynetworks list by hand, as described below. -# -# Specify "mynetworks_style = host" when Postfix should "trust" -# only the local machine. -# -#mynetworks_style = class -#mynetworks_style = subnet -#mynetworks_style = host - -# Alternatively, you can specify the mynetworks list by hand, in -# which case Postfix ignores the mynetworks_style setting. -# -# Specify an explicit list of network/netmask patterns, where the -# mask specifies the number of bits in the network part of a host -# address. -# -# You can also specify the absolute pathname of a pattern file instead -# of listing the patterns here. Specify type:table for table-based lookups -# (the value on the table right-hand side is not used). -# -#mynetworks = 168.100.189.0/28, 127.0.0.0/8 -#mynetworks = $config_directory/mynetworks -#mynetworks = hash:/etc/postfix/network_table - - -# The relay_domains parameter restricts what destinations this system will -# relay mail to. See the smtpd_recipient_restrictions description in -# postconf(5) for detailed information. -# -# By default, Postfix relays mail -# - from "trusted" clients (IP address matches $mynetworks) to any destination, -# - from "untrusted" clients to destinations that match $relay_domains or -# subdomains thereof, except addresses with sender-specified routing. -# The default relay_domains value is $mydestination. -# -# In addition to the above, the Postfix SMTP server by default accepts mail -# that Postfix is final destination for: -# - destinations that match $inet_interfaces or $proxy_interfaces, -# - destinations that match $mydestination -# - destinations that match $virtual_alias_domains, -# - destinations that match $virtual_mailbox_domains. -# These destinations do not need to be listed in $relay_domains. -# -# Specify a list of hosts or domains, /file/name patterns or type:name -# lookup tables, separated by commas and/or whitespace. Continue -# long lines by starting the next line with whitespace. A file name -# is replaced by its contents; a type:name table is matched when a -# (parent) domain appears as lookup key. -# -# NOTE: Postfix will not automatically forward mail for domains that -# list this system as their primary or backup MX host. See the -# permit_mx_backup restriction description in postconf(5). -# -#relay_domains = $mydestination - - - -# INTERNET OR INTRANET - -# The relayhost parameter specifies the default host to send mail to -# when no entry is matched in the optional transport(5) table. When -# no relayhost is given, mail is routed directly to the destination. -# -# On an intranet, specify the organizational domain name. If your -# internal DNS uses no MX records, specify the name of the intranet -# gateway host instead. -# -# In the case of SMTP, specify a domain, host, host:port, [host]:port, -# [address] or [address]:port; the form [host] turns off MX lookups. -# -# If you're connected via UUCP, see also the default_transport parameter. -# -#relayhost = $mydomain -#relayhost = [gateway.my.domain] -#relayhost = [mailserver.isp.tld] -#relayhost = uucphost -#relayhost = [an.ip.add.ress] -relayhost = bastion - - -# REJECTING UNKNOWN RELAY USERS -# -# The relay_recipient_maps parameter specifies optional lookup tables -# with all addresses in the domains that match $relay_domains. -# -# If this parameter is defined, then the SMTP server will reject -# mail for unknown relay users. This feature is off by default. -# -# The right-hand side of the lookup tables is conveniently ignored. -# In the left-hand side, specify an @domain.tld wild-card, or specify -# a user(a)domain.tld address. -# -#relay_recipient_maps = hash:/etc/postfix/relay_recipients - -# INPUT RATE CONTROL -# -# The in_flow_delay configuration parameter implements mail input -# flow control. This feature is turned on by default, although it -# still needs further development (it's disabled on SCO UNIX due -# to an SCO bug). -# -# A Postfix process will pause for $in_flow_delay seconds before -# accepting a new message, when the message arrival rate exceeds the -# message delivery rate. With the default 100 SMTP server process -# limit, this limits the mail inflow to 100 messages a second more -# than the number of messages delivered per second. -# -# Specify 0 to disable the feature. Valid delays are 0..10. -# -#in_flow_delay = 1s - -# ADDRESS REWRITING -# -# The ADDRESS_REWRITING_README document gives information about -# address masquerading or other forms of address rewriting including -# username->Firstname.Lastname mapping. - -masquerade_domains = redhat.com -masquerade_exceptions = root apache - -# ADDRESS REDIRECTION (VIRTUAL DOMAIN) -# -# The VIRTUAL_README document gives information about the many forms -# of domain hosting that Postfix supports. - -# "USER HAS MOVED" BOUNCE MESSAGES -# -# See the discussion in the ADDRESS_REWRITING_README document. - -# TRANSPORT MAP -# -# See the discussion in the ADDRESS_REWRITING_README document. - -# ALIAS DATABASE -# -# The alias_maps parameter specifies the list of alias databases used -# by the local delivery agent. The default list is system dependent. -# -# On systems with NIS, the default is to search the local alias -# database, then the NIS alias database. See aliases(5) for syntax -# details. -# -# If you change the alias database, run "postalias /etc/aliases" (or -# wherever your system stores the mail alias file), or simply run -# "newaliases" to build the necessary DBM or DB file. -# -# It will take a minute or so before changes become visible. Use -# "postfix reload" to eliminate the delay. -# -#alias_maps = dbm:/etc/aliases -alias_maps = hash:/etc/aliases, hash:/etc/mailman/aliases -#alias_maps = hash:/etc/aliases, nis:mail.aliases -#alias_maps = netinfo:/aliases - -# The alias_database parameter specifies the alias database(s) that -# are built with "newaliases" or "sendmail -bi". This is a separate -# configuration parameter, because alias_maps (see above) may specify -# tables that are not necessarily all under control by Postfix. -# -#alias_database = dbm:/etc/aliases -#alias_database = dbm:/etc/mail/aliases -alias_database = hash:/etc/aliases -#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases - -# ADDRESS EXTENSIONS (e.g., user+foo) -# -# The recipient_delimiter parameter specifies the separator between -# user names and address extensions (user+foo). See canonical(5), -# local(8), relocated(5) and virtual(5) for the effects this has on -# aliases, canonical, virtual, relocated and .forward file lookups. -# Basically, the software tries user+foo and .forward+foo before -# trying user and .forward. -# -recipient_delimiter = + - -# DELIVERY TO MAILBOX -# -# The home_mailbox parameter specifies the optional pathname of a -# mailbox file relative to a user's home directory. The default -# mailbox file is /var/spool/mail/user or /var/mail/user. Specify -# "Maildir/" for qmail-style delivery (the / is required). -# -#home_mailbox = Mailbox -#home_mailbox = Maildir/ - -# The mail_spool_directory parameter specifies the directory where -# UNIX-style mailboxes are kept. The default setting depends on the -# system type. -# -#mail_spool_directory = /var/mail -#mail_spool_directory = /var/spool/mail - -# The mailbox_command parameter specifies the optional external -# command to use instead of mailbox delivery. The command is run as -# the recipient with proper HOME, SHELL and LOGNAME environment settings. -# Exception: delivery for root is done as $default_user. -# -# Other environment variables of interest: USER (recipient username), -# EXTENSION (address extension), DOMAIN (domain part of address), -# and LOCAL (the address localpart). -# -# Unlike other Postfix configuration parameters, the mailbox_command -# parameter is not subjected to $parameter substitutions. This is to -# make it easier to specify shell syntax (see example below). -# -# Avoid shell meta characters because they will force Postfix to run -# an expensive shell process. Procmail alone is expensive enough. -# -# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN -# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. -# -#mailbox_command = /usr/bin/procmail -#mailbox_command = /some/where/procmail -a "$EXTENSION" - -# The mailbox_transport specifies the optional transport in master.cf -# to use after processing aliases and .forward files. This parameter -# has precedence over the mailbox_command, fallback_transport and -# luser_relay parameters. -# -# Specify a string of the form transport:nexthop, where transport is -# the name of a mail delivery transport defined in master.cf. The -# :nexthop part is optional. For more details see the sample transport -# configuration file. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must update the "local_recipient_maps" setting in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp - -# If using the cyrus-imapd IMAP server deliver local mail to the IMAP -# server using LMTP (Local Mail Transport Protocol), this is prefered -# over the older cyrus deliver program by setting the -# mailbox_transport as below: -# -# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp -# -# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via -# these settings. -# -# local_destination_recipient_limit = 300 -# local_destination_concurrency_limit = 5 -# -# Of course you should adjust these settings as appropriate for the -# capacity of the hardware you are using. The recipient limit setting -# can be used to take advantage of the single instance message store -# capability of Cyrus. The concurrency limit can be used to control -# how many simultaneous LMTP sessions will be permitted to the Cyrus -# message store. -# -# To use the old cyrus deliver program you have to set: -#mailbox_transport = cyrus - -# The fallback_transport specifies the optional transport in master.cf -# to use for recipients that are not found in the UNIX passwd database. -# This parameter has precedence over the luser_relay parameter. -# -# Specify a string of the form transport:nexthop, where transport is -# the name of a mail delivery transport defined in master.cf. The -# :nexthop part is optional. For more details see the sample transport -# configuration file. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must update the "local_recipient_maps" setting in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp -#fallback_transport = - -#transport_maps = hash:/etc/postfix/transport -# The luser_relay parameter specifies an optional destination address -# for unknown recipients. By default, mail for unknown@$mydestination, -# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned -# as undeliverable. -# -# The following expansions are done on luser_relay: $user (recipient -# username), $shell (recipient shell), $home (recipient home directory), -# $recipient (full recipient address), $extension (recipient address -# extension), $domain (recipient domain), $local (entire recipient -# localpart), $recipient_delimiter. Specify ${name?value} or -# ${name:value} to expand value only when $name does (does not) exist. -# -# luser_relay works only for the default Postfix local delivery agent. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must specify "local_recipient_maps =" (i.e. empty) in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#luser_relay = $user(a)other.host -#luser_relay = $local(a)other.host -#luser_relay = admin+$local - -# JUNK MAIL CONTROLS -# -# The controls listed here are only a very small subset. The file -# SMTPD_ACCESS_README provides an overview. - -# The header_checks parameter specifies an optional table with patterns -# that each logical message header is matched against, including -# headers that span multiple physical lines. -# -# By default, these patterns also apply to MIME headers and to the -# headers of attached messages. With older Postfix versions, MIME and -# attached message headers were treated as body text. -# -# For details, see "man header_checks". -# -header_checks = regexp:/etc/postfix/header_checks - -# FAST ETRN SERVICE -# -# Postfix maintains per-destination logfiles with information about -# deferred mail, so that mail can be flushed quickly with the SMTP -# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". -# See the ETRN_README document for a detailed description. -# -# The fast_flush_domains parameter controls what destinations are -# eligible for this service. By default, they are all domains that -# this server is willing to relay mail to. -# -#fast_flush_domains = $relay_domains - -# SHOW SOFTWARE VERSION OR NOT -# -# The smtpd_banner parameter specifies the text that follows the 220 -# code in the SMTP server's greeting banner. Some people like to see -# the mail version advertised. By default, Postfix shows no version. -# -# You MUST specify $myhostname at the start of the text. That is an -# RFC requirement. Postfix itself does not care. -# -#smtpd_banner = $myhostname ESMTP $mail_name -#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) - -# PARALLEL DELIVERY TO THE SAME DESTINATION -# -# How many parallel deliveries to the same user or domain? With local -# delivery, it does not make sense to do massively parallel delivery -# to the same user, because mailbox updates must happen sequentially, -# and expensive pipelines in .forward files can cause disasters when -# too many are run at the same time. With SMTP deliveries, 10 -# simultaneous connections to the same domain could be sufficient to -# raise eyebrows. -# -# Each message delivery transport has its XXX_destination_concurrency_limit -# parameter. The default is $default_destination_concurrency_limit for -# most delivery transports. For the local delivery agent the default is 2. - -#local_destination_concurrency_limit = 2 -#default_destination_concurrency_limit = 20 - -# DEBUGGING CONTROL -# -# The debug_peer_level parameter specifies the increment in verbose -# logging level when an SMTP client or server host name or address -# matches a pattern in the debug_peer_list parameter. -# -debug_peer_level = 2 - -# The debug_peer_list parameter specifies an optional list of domain -# or network patterns, /file/name patterns or type:name tables. When -# an SMTP client or server host name or address matches a pattern, -# increase the verbose logging level by the amount specified in the -# debug_peer_level parameter. -# -#debug_peer_list = 127.0.0.1 -#debug_peer_list = some.domain - -# The debugger_command specifies the external command that is executed -# when a Postfix daemon program is run with the -D option. -# -# Use "command .. & sleep 5" so that the debugger can attach before -# the process marches on. If you use an X-based debugger, be sure to -# set up your XAUTHORITY environment variable before starting Postfix. -# -debugger_command = - PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin - xxgdb $daemon_directory/$process_name $process_id & sleep 5 - -# If you can't use X, use this to capture the call stack when a -# daemon crashes. The result is in a file in the configuration -# directory, and is named after the process name and the process ID. -# -# debugger_command = -# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; -# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 -# >$config_directory/$process_name.$process_id.log & sleep 5 -# -# Another possibility is to run gdb under a detached screen session. -# To attach to the screen sesssion, su root and run "screen -r -# <id_string>" where <id_string> uniquely matches one of the detached -# sessions (from "screen -list"). -# -# debugger_command = -# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen -# -dmS $process_name gdb $daemon_directory/$process_name -# $process_id & sleep 1 - -# INSTALL-TIME CONFIGURATION INFORMATION -# -# The following parameters are used when installing a new Postfix version. -# -# sendmail_path: The full pathname of the Postfix sendmail command. -# This is the Sendmail-compatible mail posting interface. -# -sendmail_path = /usr/sbin/sendmail.postfix - -# newaliases_path: The full pathname of the Postfix newaliases command. -# This is the Sendmail-compatible command to build alias databases. -# -newaliases_path = /usr/bin/newaliases.postfix - -# mailq_path: The full pathname of the Postfix mailq command. This -# is the Sendmail-compatible mail queue listing command. -# -mailq_path = /usr/bin/mailq.postfix - -# setgid_group: The group for mail submission and queue management -# commands. This must be a group name with a numerical group ID that -# is not shared with other accounts, not even with the Postfix account. -# -setgid_group = postdrop - -# html_directory: The location of the Postfix HTML documentation. -# -html_directory = no - -# manpage_directory: The location of the Postfix on-line manual pages. -# -manpage_directory = /usr/share/man - -# sample_directory: The location of the Postfix sample configuration files. -# This parameter is obsolete as of Postfix 2.1. -# -sample_directory = /usr/share/doc/postfix-2.4.5/samples - -# readme_directory: The location of the Postfix README files. -# -readme_directory = /usr/share/doc/postfix-2.4.5/README_FILES - -# add this to new postfix to get it to add proper message-id and other -# headers to outgoing emails via the gateway. - - -message_size_limit = 20971520 diff --git a/modules/postfix/files/main.cf/main.cf.hosted1.fedoraproject.org b/modules/postfix/files/main.cf/main.cf.hosted1.fedoraproject.org deleted file mode 100644 index f174c55..0000000 --- a/modules/postfix/files/main.cf/main.cf.hosted1.fedoraproject.org +++ /dev/null @@ -1,687 +0,0 @@ -# "false" -# Global Postfix configuration file. This file lists only a subset -# of all parameters. For the syntax, and for a complete parameter -# list, see the postconf(5) manual page (command: "man 5 postconf"). -# -# For common configuration examples, see BASIC_CONFIGURATION_README -# and STANDARD_CONFIGURATION_README. To find these documents, use -# the command "postconf html_directory readme_directory", or go to -# http://www.postfix.org/. -# -# For best results, change no more than 2-3 parameters at a time, -# and test if Postfix still works after every change. - -# SOFT BOUNCE -# -# The soft_bounce parameter provides a limited safety net for -# testing. When soft_bounce is enabled, mail will remain queued that -# would otherwise bounce. This parameter disables locally-generated -# bounces, and prevents the SMTP server from rejecting mail permanently -# (by changing 5xx replies into 4xx replies). However, soft_bounce -# is no cure for address rewriting mistakes or mail routing mistakes. -# -#soft_bounce = no - -# LOCAL PATHNAME INFORMATION -# -# The queue_directory specifies the location of the Postfix queue. -# This is also the root directory of Postfix daemons that run chrooted. -# See the files in examples/chroot-setup for setting up Postfix chroot -# environments on different UNIX systems. -# -queue_directory = /var/spool/postfix - -# The command_directory parameter specifies the location of all -# postXXX commands. -# -command_directory = /usr/sbin - -# The daemon_directory parameter specifies the location of all Postfix -# daemon programs (i.e. programs listed in the master.cf file). This -# directory must be owned by root. -# -daemon_directory = /usr/libexec/postfix - -# QUEUE AND PROCESS OWNERSHIP -# -# The mail_owner parameter specifies the owner of the Postfix queue -# and of most Postfix daemon processes. Specify the name of a user -# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS -# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In -# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED -# USER. -# -mail_owner = postfix - -# The default_privs parameter specifies the default rights used by -# the local delivery agent for delivery to external file or command. -# These rights are used in the absence of a recipient user context. -# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. -# -#default_privs = nobody - -# INTERNET HOST AND DOMAIN NAMES -# -# The myhostname parameter specifies the internet hostname of this -# mail system. The default is to use the fully-qualified domain name -# from gethostname(). $myhostname is used as a default value for many -# other configuration parameters. -# -#myhostname = host.domain.tld -#myhostname = virtual.domain.tld - -# The mydomain parameter specifies the local internet domain name. -# The default is to use $myhostname minus the first component. -# $mydomain is used as a default value for many other configuration -# parameters. -# -#mydomain = domain.tld - -# SENDING MAIL -# -# The myorigin parameter specifies the domain that locally-posted -# mail appears to come from. The default is to append $myhostname, -# which is fine for small sites. If you run a domain with multiple -# machines, you should (1) change this to $mydomain and (2) set up -# a domain-wide alias database that aliases each user to -# user(a)that.users.mailhost. -# -# For the sake of consistency between sender and recipient addresses, -# myorigin also specifies the default domain name that is appended -# to recipient addresses that have no @domain part. -# -#myorigin = $myhostname -#myorigin = $mydomain - -myhostname = fedorahosted.org -myorigin = fedorahosted.org - -# RECEIVING MAIL - -# The inet_interfaces parameter specifies the network interface -# addresses that this mail system receives mail on. By default, -# the software claims all active interfaces on the machine. The -# parameter also controls delivery of mail to user(a)[ip.address]. -# -# See also the proxy_interfaces parameter, for network addresses that -# are forwarded to us via a proxy or network address translator. -# -# Note: you need to stop/start Postfix when this parameter changes. -# -#inet_interfaces = all -#inet_interfaces = $myhostname -#inet_interfaces = $myhostname, localhost -inet_interfaces = all - -# The proxy_interfaces parameter specifies the network interface -# addresses that this mail system receives mail on by way of a -# proxy or network address translation unit. This setting extends -# the address list specified with the inet_interfaces parameter. -# -# You must specify your proxy/NAT addresses when your system is a -# backup MX host for other domains, otherwise mail delivery loops -# will happen when the primary MX host is down. -# -#proxy_interfaces = -#proxy_interfaces = 1.2.3.4 - -# The mydestination parameter specifies the list of domains that this -# machine considers itself the final destination for. -# -# These domains are routed to the delivery agent specified with the -# local_transport parameter setting. By default, that is the UNIX -# compatible delivery agent that lookups all recipients in /etc/passwd -# and /etc/aliases or their equivalent. -# -# The default is $myhostname + localhost.$mydomain. On a mail domain -# gateway, you should also include $mydomain. -# -# Do not specify the names of virtual domains - those domains are -# specified elsewhere (see VIRTUAL_README). -# -# Do not specify the names of domains that this machine is backup MX -# host for. Specify those names via the relay_domains settings for -# the SMTP server, or use permit_mx_backup if you are lazy (see -# STANDARD_CONFIGURATION_README). -# -# The local machine is always the final destination for mail addressed -# to user(a)[the.net.work.address] of an interface that the mail system -# receives mail on (see the inet_interfaces parameter). -# -# Specify a list of host or domain names, /file/name or type:table -# patterns, separated by commas and/or whitespace. A /file/name -# pattern is replaced by its contents; a type:table is matched when -# a name matches a lookup key (the right-hand side is ignored). -# Continue long lines by starting the next line with whitespace. -# -# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". -# -mydestination = $myhostname, localhost.$mydomain, fedora.redhat.com, localhost, fedorahosted.org -#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain -#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, -# mail.$mydomain, www.$mydomain, ftp.$mydomain - -# REJECTING MAIL FOR UNKNOWN LOCAL USERS -# -# The local_recipient_maps parameter specifies optional lookup tables -# with all names or addresses of users that are local with respect -# to $mydestination, $inet_interfaces or $proxy_interfaces. -# -# If this parameter is defined, then the SMTP server will reject -# mail for unknown local users. This parameter is defined by default. -# -# To turn off local recipient checking in the SMTP server, specify -# local_recipient_maps = (i.e. empty). -# -# The default setting assumes that you use the default Postfix local -# delivery agent for local delivery. You need to update the -# local_recipient_maps setting if: -# -# - You define $mydestination domain recipients in files other than -# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. -# For example, you define $mydestination domain recipients in -# the $virtual_mailbox_maps files. -# -# - You redefine the local delivery agent in master.cf. -# -# - You redefine the "local_transport" setting in main.cf. -# -# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" -# feature of the Postfix local delivery agent (see local(8)). -# -# Details are described in the LOCAL_RECIPIENT_README file. -# -# Beware: if the Postfix SMTP server runs chrooted, you probably have -# to access the passwd file via the proxymap service, in order to -# overcome chroot restrictions. The alternative, having a copy of -# the system passwd file in the chroot jail is just not practical. -# -# The right-hand side of the lookup tables is conveniently ignored. -# In the left-hand side, specify a bare username, an @domain.tld -# wild-card, or specify a user(a)domain.tld address. -# -local_recipient_maps = $alias_maps -#local_recipient_maps = unix:passwd.byname $alias_maps -#local_recipient_maps = proxy:unix:passwd.byname $alias_maps -#local_recipient_maps = - -# The unknown_local_recipient_reject_code specifies the SMTP server -# response code when a recipient domain matches $mydestination or -# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty -# and the recipient address or address local-part is not found. -# -# The default setting is 550 (reject mail) but it is safer to start -# with 450 (try again later) until you are certain that your -# local_recipient_maps settings are OK. -# -unknown_local_recipient_reject_code = 550 - -# TRUST AND RELAY CONTROL - -# The mynetworks parameter specifies the list of "trusted" SMTP -# clients that have more privileges than "strangers". -# -# In particular, "trusted" SMTP clients are allowed to relay mail -# through Postfix. See the smtpd_recipient_restrictions parameter -# in postconf(5). -# -# You can specify the list of "trusted" network addresses by hand -# or you can let Postfix do it for you (which is the default). -# -# By default (mynetworks_style = subnet), Postfix "trusts" SMTP -# clients in the same IP subnetworks as the local machine. -# On Linux, this does works correctly only with interfaces specified -# with the "ifconfig" command. -# -# Specify "mynetworks_style = class" when Postfix should "trust" SMTP -# clients in the same IP class A/B/C networks as the local machine. -# Don't do this with a dialup site - it would cause Postfix to "trust" -# your entire provider's network. Instead, specify an explicit -# mynetworks list by hand, as described below. -# -# Specify "mynetworks_style = host" when Postfix should "trust" -# only the local machine. -# -#mynetworks_style = class -#mynetworks_style = subnet -#mynetworks_style = host - -# Alternatively, you can specify the mynetworks list by hand, in -# which case Postfix ignores the mynetworks_style setting. -# -# Specify an explicit list of network/netmask patterns, where the -# mask specifies the number of bits in the network part of a host -# address. -# -# You can also specify the absolute pathname of a pattern file instead -# of listing the patterns here. Specify type:table for table-based lookups -# (the value on the table right-hand side is not used). -# -#mynetworks = 168.100.189.0/28, 127.0.0.0/8 -#mynetworks = $config_directory/mynetworks -#mynetworks = hash:/etc/postfix/network_table - - -# The relay_domains parameter restricts what destinations this system will -# relay mail to. See the smtpd_recipient_restrictions description in -# postconf(5) for detailed information. -# -# By default, Postfix relays mail -# - from "trusted" clients (IP address matches $mynetworks) to any destination, -# - from "untrusted" clients to destinations that match $relay_domains or -# subdomains thereof, except addresses with sender-specified routing. -# The default relay_domains value is $mydestination. -# -# In addition to the above, the Postfix SMTP server by default accepts mail -# that Postfix is final destination for: -# - destinations that match $inet_interfaces or $proxy_interfaces, -# - destinations that match $mydestination -# - destinations that match $virtual_alias_domains, -# - destinations that match $virtual_mailbox_domains. -# These destinations do not need to be listed in $relay_domains. -# -# Specify a list of hosts or domains, /file/name patterns or type:name -# lookup tables, separated by commas and/or whitespace. Continue -# long lines by starting the next line with whitespace. A file name -# is replaced by its contents; a type:name table is matched when a -# (parent) domain appears as lookup key. -# -# NOTE: Postfix will not automatically forward mail for domains that -# list this system as their primary or backup MX host. See the -# permit_mx_backup restriction description in postconf(5). -# -#relay_domains = $mydestination - - - -# INTERNET OR INTRANET - -# The relayhost parameter specifies the default host to send mail to -# when no entry is matched in the optional transport(5) table. When -# no relayhost is given, mail is routed directly to the destination. -# -# On an intranet, specify the organizational domain name. If your -# internal DNS uses no MX records, specify the name of the intranet -# gateway host instead. -# -# In the case of SMTP, specify a domain, host, host:port, [host]:port, -# [address] or [address]:port; the form [host] turns off MX lookups. -# -# If you're connected via UUCP, see also the default_transport parameter. -# -#relayhost = $mydomain -#relayhost = [gateway.my.domain] -#relayhost = [mailserver.isp.tld] -#relayhost = uucphost -#relayhost = [an.ip.add.ress] -relayhost = bastion - - -# REJECTING UNKNOWN RELAY USERS -# -# The relay_recipient_maps parameter specifies optional lookup tables -# with all addresses in the domains that match $relay_domains. -# -# If this parameter is defined, then the SMTP server will reject -# mail for unknown relay users. This feature is off by default. -# -# The right-hand side of the lookup tables is conveniently ignored. -# In the left-hand side, specify an @domain.tld wild-card, or specify -# a user(a)domain.tld address. -# -#relay_recipient_maps = hash:/etc/postfix/relay_recipients - -# INPUT RATE CONTROL -# -# The in_flow_delay configuration parameter implements mail input -# flow control. This feature is turned on by default, although it -# still needs further development (it's disabled on SCO UNIX due -# to an SCO bug). -# -# A Postfix process will pause for $in_flow_delay seconds before -# accepting a new message, when the message arrival rate exceeds the -# message delivery rate. With the default 100 SMTP server process -# limit, this limits the mail inflow to 100 messages a second more -# than the number of messages delivered per second. -# -# Specify 0 to disable the feature. Valid delays are 0..10. -# -#in_flow_delay = 1s - -# ADDRESS REWRITING -# -# The ADDRESS_REWRITING_README document gives information about -# address masquerading or other forms of address rewriting including -# username->Firstname.Lastname mapping. - -masquerade_domains = redhat.com -masquerade_exceptions = root apache - -# ADDRESS REDIRECTION (VIRTUAL DOMAIN) -# -# The VIRTUAL_README document gives information about the many forms -# of domain hosting that Postfix supports. - -# "USER HAS MOVED" BOUNCE MESSAGES -# -# See the discussion in the ADDRESS_REWRITING_README document. - -# TRANSPORT MAP -# -# See the discussion in the ADDRESS_REWRITING_README document. - -# ALIAS DATABASE -# -# The alias_maps parameter specifies the list of alias databases used -# by the local delivery agent. The default list is system dependent. -# -# On systems with NIS, the default is to search the local alias -# database, then the NIS alias database. See aliases(5) for syntax -# details. -# -# If you change the alias database, run "postalias /etc/aliases" (or -# wherever your system stores the mail alias file), or simply run -# "newaliases" to build the necessary DBM or DB file. -# -# It will take a minute or so before changes become visible. Use -# "postfix reload" to eliminate the delay. -# -#alias_maps = dbm:/etc/aliases -alias_maps = hash:/etc/aliases, hash:/etc/mailman/aliases -#alias_maps = hash:/etc/aliases, nis:mail.aliases -#alias_maps = netinfo:/aliases - -# The alias_database parameter specifies the alias database(s) that -# are built with "newaliases" or "sendmail -bi". This is a separate -# configuration parameter, because alias_maps (see above) may specify -# tables that are not necessarily all under control by Postfix. -# -#alias_database = dbm:/etc/aliases -#alias_database = dbm:/etc/mail/aliases -alias_database = hash:/etc/aliases -#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases - -# ADDRESS EXTENSIONS (e.g., user+foo) -# -# The recipient_delimiter parameter specifies the separator between -# user names and address extensions (user+foo). See canonical(5), -# local(8), relocated(5) and virtual(5) for the effects this has on -# aliases, canonical, virtual, relocated and .forward file lookups. -# Basically, the software tries user+foo and .forward+foo before -# trying user and .forward. -# -recipient_delimiter = + - -# DELIVERY TO MAILBOX -# -# The home_mailbox parameter specifies the optional pathname of a -# mailbox file relative to a user's home directory. The default -# mailbox file is /var/spool/mail/user or /var/mail/user. Specify -# "Maildir/" for qmail-style delivery (the / is required). -# -#home_mailbox = Mailbox -#home_mailbox = Maildir/ - -# The mail_spool_directory parameter specifies the directory where -# UNIX-style mailboxes are kept. The default setting depends on the -# system type. -# -#mail_spool_directory = /var/mail -#mail_spool_directory = /var/spool/mail - -# The mailbox_command parameter specifies the optional external -# command to use instead of mailbox delivery. The command is run as -# the recipient with proper HOME, SHELL and LOGNAME environment settings. -# Exception: delivery for root is done as $default_user. -# -# Other environment variables of interest: USER (recipient username), -# EXTENSION (address extension), DOMAIN (domain part of address), -# and LOCAL (the address localpart). -# -# Unlike other Postfix configuration parameters, the mailbox_command -# parameter is not subjected to $parameter substitutions. This is to -# make it easier to specify shell syntax (see example below). -# -# Avoid shell meta characters because they will force Postfix to run -# an expensive shell process. Procmail alone is expensive enough. -# -# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN -# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. -# -#mailbox_command = /usr/bin/procmail -#mailbox_command = /some/where/procmail -a "$EXTENSION" - -# The mailbox_transport specifies the optional transport in master.cf -# to use after processing aliases and .forward files. This parameter -# has precedence over the mailbox_command, fallback_transport and -# luser_relay parameters. -# -# Specify a string of the form transport:nexthop, where transport is -# the name of a mail delivery transport defined in master.cf. The -# :nexthop part is optional. For more details see the sample transport -# configuration file. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must update the "local_recipient_maps" setting in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp - -# If using the cyrus-imapd IMAP server deliver local mail to the IMAP -# server using LMTP (Local Mail Transport Protocol), this is prefered -# over the older cyrus deliver program by setting the -# mailbox_transport as below: -# -# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp -# -# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via -# these settings. -# -# local_destination_recipient_limit = 300 -# local_destination_concurrency_limit = 5 -# -# Of course you should adjust these settings as appropriate for the -# capacity of the hardware you are using. The recipient limit setting -# can be used to take advantage of the single instance message store -# capability of Cyrus. The concurrency limit can be used to control -# how many simultaneous LMTP sessions will be permitted to the Cyrus -# message store. -# -# To use the old cyrus deliver program you have to set: -#mailbox_transport = cyrus - -# The fallback_transport specifies the optional transport in master.cf -# to use for recipients that are not found in the UNIX passwd database. -# This parameter has precedence over the luser_relay parameter. -# -# Specify a string of the form transport:nexthop, where transport is -# the name of a mail delivery transport defined in master.cf. The -# :nexthop part is optional. For more details see the sample transport -# configuration file. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must update the "local_recipient_maps" setting in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp -#fallback_transport = - -#transport_maps = hash:/etc/postfix/transport -# The luser_relay parameter specifies an optional destination address -# for unknown recipients. By default, mail for unknown@$mydestination, -# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned -# as undeliverable. -# -# The following expansions are done on luser_relay: $user (recipient -# username), $shell (recipient shell), $home (recipient home directory), -# $recipient (full recipient address), $extension (recipient address -# extension), $domain (recipient domain), $local (entire recipient -# localpart), $recipient_delimiter. Specify ${name?value} or -# ${name:value} to expand value only when $name does (does not) exist. -# -# luser_relay works only for the default Postfix local delivery agent. -# -# NOTE: if you use this feature for accounts not in the UNIX password -# file, then you must specify "local_recipient_maps =" (i.e. empty) in -# the main.cf file, otherwise the SMTP server will reject mail for -# non-UNIX accounts with "User unknown in local recipient table". -# -#luser_relay = $user(a)other.host -#luser_relay = $local(a)other.host -#luser_relay = admin+$local - -# JUNK MAIL CONTROLS -# -# The controls listed here are only a very small subset. The file -# SMTPD_ACCESS_README provides an overview. - -# The header_checks parameter specifies an optional table with patterns -# that each logical message header is matched against, including -# headers that span multiple physical lines. -# -# By default, these patterns also apply to MIME headers and to the -# headers of attached messages. With older Postfix versions, MIME and -# attached message headers were treated as body text. -# -# For details, see "man header_checks". -# -header_checks = regexp:/etc/postfix/header_checks - -# FAST ETRN SERVICE -# -# Postfix maintains per-destination logfiles with information about -# deferred mail, so that mail can be flushed quickly with the SMTP -# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". -# See the ETRN_README document for a detailed description. -# -# The fast_flush_domains parameter controls what destinations are -# eligible for this service. By default, they are all domains that -# this server is willing to relay mail to. -# -#fast_flush_domains = $relay_domains - -# SHOW SOFTWARE VERSION OR NOT -# -# The smtpd_banner parameter specifies the text that follows the 220 -# code in the SMTP server's greeting banner. Some people like to see -# the mail version advertised. By default, Postfix shows no version. -# -# You MUST specify $myhostname at the start of the text. That is an -# RFC requirement. Postfix itself does not care. -# -#smtpd_banner = $myhostname ESMTP $mail_name -#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) - -# PARALLEL DELIVERY TO THE SAME DESTINATION -# -# How many parallel deliveries to the same user or domain? With local -# delivery, it does not make sense to do massively parallel delivery -# to the same user, because mailbox updates must happen sequentially, -# and expensive pipelines in .forward files can cause disasters when -# too many are run at the same time. With SMTP deliveries, 10 -# simultaneous connections to the same domain could be sufficient to -# raise eyebrows. -# -# Each message delivery transport has its XXX_destination_concurrency_limit -# parameter. The default is $default_destination_concurrency_limit for -# most delivery transports. For the local delivery agent the default is 2. - -#local_destination_concurrency_limit = 2 -#default_destination_concurrency_limit = 20 - -# DEBUGGING CONTROL -# -# The debug_peer_level parameter specifies the increment in verbose -# logging level when an SMTP client or server host name or address -# matches a pattern in the debug_peer_list parameter. -# -debug_peer_level = 2 - -# The debug_peer_list parameter specifies an optional list of domain -# or network patterns, /file/name patterns or type:name tables. When -# an SMTP client or server host name or address matches a pattern, -# increase the verbose logging level by the amount specified in the -# debug_peer_level parameter. -# -#debug_peer_list = 127.0.0.1 -#debug_peer_list = some.domain - -# The debugger_command specifies the external command that is executed -# when a Postfix daemon program is run with the -D option. -# -# Use "command .. & sleep 5" so that the debugger can attach before -# the process marches on. If you use an X-based debugger, be sure to -# set up your XAUTHORITY environment variable before starting Postfix. -# -debugger_command = - PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin - xxgdb $daemon_directory/$process_name $process_id & sleep 5 - -# If you can't use X, use this to capture the call stack when a -# daemon crashes. The result is in a file in the configuration -# directory, and is named after the process name and the process ID. -# -# debugger_command = -# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; -# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 -# >$config_directory/$process_name.$process_id.log & sleep 5 -# -# Another possibility is to run gdb under a detached screen session. -# To attach to the screen sesssion, su root and run "screen -r -# <id_string>" where <id_string> uniquely matches one of the detached -# sessions (from "screen -list"). -# -# debugger_command = -# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen -# -dmS $process_name gdb $daemon_directory/$process_name -# $process_id & sleep 1 - -# INSTALL-TIME CONFIGURATION INFORMATION -# -# The following parameters are used when installing a new Postfix version. -# -# sendmail_path: The full pathname of the Postfix sendmail command. -# This is the Sendmail-compatible mail posting interface. -# -sendmail_path = /usr/sbin/sendmail.postfix - -# newaliases_path: The full pathname of the Postfix newaliases command. -# This is the Sendmail-compatible command to build alias databases. -# -newaliases_path = /usr/bin/newaliases.postfix - -# mailq_path: The full pathname of the Postfix mailq command. This -# is the Sendmail-compatible mail queue listing command. -# -mailq_path = /usr/bin/mailq.postfix - -# setgid_group: The group for mail submission and queue management -# commands. This must be a group name with a numerical group ID that -# is not shared with other accounts, not even with the Postfix account. -# -setgid_group = postdrop - -# html_directory: The location of the Postfix HTML documentation. -# -html_directory = no - -# manpage_directory: The location of the Postfix on-line manual pages. -# -manpage_directory = /usr/share/man - -# sample_directory: The location of the Postfix sample configuration files. -# This parameter is obsolete as of Postfix 2.1. -# -sample_directory = /usr/share/doc/postfix-2.4.5/samples - -# readme_directory: The location of the Postfix README files. -# -readme_directory = /usr/share/doc/postfix-2.4.5/README_FILES - -# add this to new postfix to get it to add proper message-id and other -# headers to outgoing emails via the gateway. - - -message_size_limit = 20971520 -- 1.7.2.1

11 years, 3 months

3
2
0 / 0

Freeze break: network setup for download-rdu boxes

by Kevin Fenzi

Our download-rdu machines are alive again. ;) This sets them up with the new ip's... Without this they won't work at all, so it's got to be an improvement. ;) +1's? kevin -- diff --git a/manifests/nodes/download-rdu01.fedoraproject.org.pp b/manifests/nodes/download-rdu01.fedoraproject.org.pp index 20fcecd..285d21f 100644 --- a/manifests/nodes/download-rdu01.fedoraproject.org.pp +++ b/manifests/nodes/download-rdu01.fedoraproject.org.pp @@ -4,22 +4,22 @@ node "download-rdu01.fedoraproject.org" { include openvpn::client eth { 'eth0': - ipaddr => "10.11.30.1", - netmask => "255.255.255.0", + ipaddr => "209.132.190.1", + netmask => "255.255.255.192", } eth { 'eth0:0': - ipaddr => "10.11.30.101", + ipaddr => "209.132.190.11", netmask => "255.255.255.0", } eth { 'eth1': - ipaddr => "10.11.29.1", + ipaddr => "172.31.1.1", netmask => "255.255.255.0", # hwaddr => "e4:1f:13:2f:d4:96", } - route { 'eth1': - content => '10.11.254.0/24 via 10.11.29.254' - } +# route { 'eth1': +# content => '10.11.254.0/24 via 10.11.29.254' +# } } diff --git a/manifests/nodes/download-rdu02.fedoraproject.org.pp b/manifests/nodes/download-rdu02.fedoraproject.org.pp index 7a91050..62080e4 100644 --- a/manifests/nodes/download-rdu02.fedoraproject.org.pp +++ b/manifests/nodes/download-rdu02.fedoraproject.org.pp @@ -3,24 +3,25 @@ node "download-rdu02.fedoraproject.org" { include download-server::rdu include openvpn::client + eth { 'eth0': - ipaddr => "10.11.30.2", - netmask => "255.255.255.0", - hwaddr => "E4:1F:13:6A:D5:40", + ipaddr => "209.132.190.2", + netmask => "255.255.255.192", } eth { 'eth0:0': - ipaddr => "10.11.30.102", + ipaddr => "209.132.190.12", netmask => "255.255.255.0", } eth { 'eth1': - ipaddr => "10.11.29.2", + ipaddr => "172.31.1.2", netmask => "255.255.255.0", - hwaddr => "E4:1F:13:6A:D5:42", - } - - route { 'eth1': - content => '10.11.254.0/24 via 10.11.29.254' +# hwaddr => "e4:1f:13:2f:d4:96", } + +# route { 'eth1': +# content => '10.11.254.0/24 via 10.11.29.254' +# } + } diff --git a/manifests/nodes/download-rdu03.fedoraproject.org.pp b/manifests/nodes/download-rdu03.fedoraproject.org.pp index 6238160..d9d80b1 100644 --- a/manifests/nodes/download-rdu03.fedoraproject.org.pp +++ b/manifests/nodes/download-rdu03.fedoraproject.org.pp @@ -3,23 +3,25 @@ node "download-rdu03.fedoraproject.org" { include download-server::rdu include openvpn::client + eth { 'eth0': - ipaddr => "10.11.30.3", - netmask => "255.255.255.0", + ipaddr => "209.132.190.3", + netmask => "255.255.255.192", } eth { 'eth0:0': - ipaddr => "10.11.30.103", + ipaddr => "209.132.190.13", netmask => "255.255.255.0", } eth { 'eth1': - ipaddr => "10.11.29.3", + ipaddr => "172.31.1.3", netmask => "255.255.255.0", # hwaddr => "e4:1f:13:2f:d4:96", - } - - route { 'eth1': - content => '10.11.254.0/24 via 10.11.29.254' } + +# route { 'eth1': +# content => '10.11.254.0/24 via 10.11.29.254' +# } + }

11 years, 3 months

3
2
0 / 0

OT: Mailman anti-spam syntax

by Frank Murphy

Apologies for noise, havn't got an answer to this anywhere else. Trying to prevent spam coming into the fm trac ml. created from add ticket in the fm trac. If in the mailman admin > privacy -spam-filter as 1st rule I put:- if ^Subject:.* != ^Subject:.*\Wstuff\W action > discard Will it discard all Subjects that don't contain "stuff" Which is what I want. Currently have in place: ^Subject:.*\Wstuff\W (action > accept) which still lets the odd spanner through. Or would this all have to be done in a backend file somewhere. Trying to learn Python on the wing. -- Regards, Frank "Still trying to learn, both old and new tricks" --me .

11 years, 3 months

2
1
0 / 0

RE: freeze break request: Allow download-ib01 to have pre-bitflip content.

by Matt Domsch

+1 -- Matt Domsch Technology Strategist, Dell Office of the CTO -----Original Message----- From: Kevin Fenzi [kevin(a)scrye.com<mailto:kevin@scrye.com>] Sent: Saturday, January 12, 2013 06:26 PM Central Standard Time To: Fedora Infrastructure Subject: freeze break request: Allow download-ib01 to have pre-bitflip content. Can I get +1s on this? download-ib01 isn't pulling the pre-bitflip content, which means our i2 mirrors pulling from it aren't getting it either. ;( I might just do it and ask for forgiveness if I don't hear soon. ;) kevin -- diff --git a/modules/mirrormanager/files/sync.sh b/modules/mirrormanager/files/sync.sh index 9a63adf..7d0093e 100755 --- a/modules/mirrormanager/files/sync.sh +++ b/modules/mirrormanager/files/sync.sh @@ -19,7 +19,7 @@ ${RSYNC} ${RS_OPT} ${RS_DEADLY} ${ALT_EXCLUDES} ${SERVER}::fedora-alt/ /srv/pub # http://dl.fedoraproject.org/pub/epel/ ${RSYNC} ${RS_OPT} ${RS_DEADLY} ${EPL_EXCLUDES} ${SERVER}::fedora-epel/ /srv/pub/epel/ | tail -n2 | logger -p local0.notice -t rsync_updates # http://dl.fedoraproject.org/pub/fedora/ -${RSYNC} ${RS_OPT} ${RS_DEADLY} ${FED_EXCLUDES} ${SERVER}::fedora-enchilada/ /srv/pub/fedora/ | tail -n2 | logger -p local0.notice -t rsync_updates +${RSYNC} ${RS_OPT} ${RS_DEADLY} ${FED_EXCLUDES} ${SERVER}::fedora-enchilada0/ /srv/pub/fedora/ | tail -n2 | logger -p local0.notice -t rsync_updates # Let MM know I'm all up to date #/usr/bin/report_mirror diff --git a/modules/rsync/files/rsyncd.conf.download-phx b/modules/rsync/files/rsyncd.conf.download-phx index 691bef1..e064f21 100644 --- a/modules/rsync/files/rsyncd.conf.download-phx +++ b/modules/rsync/files/rsyncd.conf.download-phx @@ -68,7 +68,7 @@ refuse options = checksum list = no uid = 263 gid = 263 - hosts allow = jobbot1.ibiblio.org 200.17.202.1/28 zeus1.kernel.org zeus2.kernel.org zeus3.kernel.org zeus4.kernel.org 149.20.20.132 204.152.191.36 199.6.1.170 130.239.17.3 sinclair.wpi.edu bonaparte.hrz.tu-chemnitz.de josephine.hrz.tu-che mirror.speedpartner.de rsyncer.ftp.heanet.ie archive.linux.duke.edu lists.us.dell.com auslistsprd01.us.dell.com auslistsdr01.us.dell.com 65.18.175.19 198.129.224.34 mirror.hiwaay.net sagres.c3sl.ufpr.br mail.fedoraunity.org scrye.com odysseus.fi.muni.cz odysseus.linux.cz rhlx01.hs-esslingen.de ftp.nrc.ca zaphod.gtlib.gatech.edu 128.171.104.148 129.21.171.98 torrent01.fedoraproject.org torrent02.fedoraproject.org sunsite.mff.cuni.cz sunsite.ms.mff.cuni.cz ultra.linux.cz ftp.cz.kernel.org 202.158.214.12 speculum.rbc.ru 71.19.151.18 + hosts allow = jobbot1.ibiblio.org 200.17.202.1/28 zeus1.kernel.org zeus2.kernel.org zeus3.kernel.org zeus4.kernel.org 149.20.20.132 204.152.191.36 199.6.1.170 130.239.17.3 sinclair.wpi.edu bonaparte.hrz.tu-chemnitz.de josephine.hrz.tu-che mirror.speedpartner.de rsyncer.ftp.heanet.ie archive.linux.duke.edu lists.us.dell.com auslistsprd01.us.dell.com auslistsdr01.us.dell.com 65.18.175.19 198.129.224.34 mirror.hiwaay.net sagres.c3sl.ufpr.br mail.fedoraunity.org scrye.com odysseus.fi.muni.cz odysseus.linux.cz rhlx01.hs-esslingen.de ftp.nrc.ca zaphod.gtlib.gatech.edu 128.171.104.148 129.21.171.98 torrent01.fedoraproject.org torrent02.fedoraproject.org sunsite.mff.cuni.cz sunsite.ms.mff.cuni.cz ultra.linux.cz ftp.cz.kernel.org 202.158.214.12 speculum.rbc.ru 71.19.151.18 152.19.134.145 [fedora-epel0] comment = Fedora EPEL for Tier0|1 Mirrors

11 years, 3 months

1
0
0 / 0

freeze break request: Allow download-ib01 to have pre-bitflip content.

by Kevin Fenzi

Can I get +1s on this? download-ib01 isn't pulling the pre-bitflip content, which means our i2 mirrors pulling from it aren't getting it either. ;( I might just do it and ask for forgiveness if I don't hear soon. ;) kevin -- diff --git a/modules/mirrormanager/files/sync.sh b/modules/mirrormanager/files/sync.sh index 9a63adf..7d0093e 100755 --- a/modules/mirrormanager/files/sync.sh +++ b/modules/mirrormanager/files/sync.sh @@ -19,7 +19,7 @@ ${RSYNC} ${RS_OPT} ${RS_DEADLY} ${ALT_EXCLUDES} ${SERVER}::fedora-alt/ /srv/pub # http://dl.fedoraproject.org/pub/epel/ ${RSYNC} ${RS_OPT} ${RS_DEADLY} ${EPL_EXCLUDES} ${SERVER}::fedora-epel/ /srv/pub/epel/ | tail -n2 | logger -p local0.notice -t rsync_updates # http://dl.fedoraproject.org/pub/fedora/ -${RSYNC} ${RS_OPT} ${RS_DEADLY} ${FED_EXCLUDES} ${SERVER}::fedora-enchilada/ /srv/pub/fedora/ | tail -n2 | logger -p local0.notice -t rsync_updates +${RSYNC} ${RS_OPT} ${RS_DEADLY} ${FED_EXCLUDES} ${SERVER}::fedora-enchilada0/ /srv/pub/fedora/ | tail -n2 | logger -p local0.notice -t rsync_updates # Let MM know I'm all up to date #/usr/bin/report_mirror diff --git a/modules/rsync/files/rsyncd.conf.download-phx b/modules/rsync/files/rsyncd.conf.download-phx index 691bef1..e064f21 100644 --- a/modules/rsync/files/rsyncd.conf.download-phx +++ b/modules/rsync/files/rsyncd.conf.download-phx @@ -68,7 +68,7 @@ refuse options = checksum list = no uid = 263 gid = 263 - hosts allow = jobbot1.ibiblio.org 200.17.202.1/28 zeus1.kernel.org zeus2.kernel.org zeus3.kernel.org zeus4.kernel.org 149.20.20.132 204.152.191.36 199.6.1.170 130.239.17.3 sinclair.wpi.edu bonaparte.hrz.tu-chemnitz.de josephine.hrz.tu-che mirror.speedpartner.de rsyncer.ftp.heanet.ie archive.linux.duke.edu lists.us.dell.com auslistsprd01.us.dell.com auslistsdr01.us.dell.com 65.18.175.19 198.129.224.34 mirror.hiwaay.net sagres.c3sl.ufpr.br mail.fedoraunity.org scrye.com odysseus.fi.muni.cz odysseus.linux.cz rhlx01.hs-esslingen.de ftp.nrc.ca zaphod.gtlib.gatech.edu 128.171.104.148 129.21.171.98 torrent01.fedoraproject.org torrent02.fedoraproject.org sunsite.mff.cuni.cz sunsite.ms.mff.cuni.cz ultra.linux.cz ftp.cz.kernel.org 202.158.214.12 speculum.rbc.ru 71.19.151.18 + hosts allow = jobbot1.ibiblio.org 200.17.202.1/28 zeus1.kernel.org zeus2.kernel.org zeus3.kernel.org zeus4.kernel.org 149.20.20.132 204.152.191.36 199.6.1.170 130.239.17.3 sinclair.wpi.edu bonaparte.hrz.tu-chemnitz.de josephine.hrz.tu-che mirror.speedpartner.de rsyncer.ftp.heanet.ie archive.linux.duke.edu lists.us.dell.com auslistsprd01.us.dell.com auslistsdr01.us.dell.com 65.18.175.19 198.129.224.34 mirror.hiwaay.net sagres.c3sl.ufpr.br mail.fedoraunity.org scrye.com odysseus.fi.muni.cz odysseus.linux.cz rhlx01.hs-esslingen.de ftp.nrc.ca zaphod.gtlib.gatech.edu 128.171.104.148 129.21.171.98 torrent01.fedoraproject.org torrent02.fedoraproject.org sunsite.mff.cuni.cz sunsite.ms.mff.cuni.cz ultra.linux.cz ftp.cz.kernel.org 202.158.214.12 speculum.rbc.ru 71.19.151.18 152.19.134.145 [fedora-epel0] comment = Fedora EPEL for Tier0|1 Mirrors

11 years, 3 months

2
1
0 / 0

Idea for FUDCon

by Pierre-Yves Chibon

Hi, I was wondering if we would be interested in having a session dedicated to the Fedora apps in the infra. Something like "Apps @ Fedora Infra, present and future", just to come back and present on what we have been doing and what we are planning to do. I am thinking: - packages - tagger - fedmsg (something short as we already have a dedicated session for this) - with busmon and fedora-notify - new elections - easyfix - status We could of course include things like 'problem tracker' (aka retrace.fp.o) but I think we should focus on what we (the infra team) is working on. And then in the future we have: - bodhi 2 - fedocal - what we do with the cloud - jenkins - buildbot (?) - coprs - new pkgdb - new elections - hyperkitty (although there is also a session dedicated to it) (- framework update ?) Maybe we could divide the presentation between the different authors as give like 10min / person (I can think of at least 5 persons involved in what I listed above) to present what apps they have been working on and what they are planning to do. Thoughts? Pierre

11 years, 3 months

2
2
0 / 0

Plan for tomorrow's Fedora Infrastructure meeting (2013-01-10)

by Kevin Fenzi

The infrastructure team will be having it's weekly meeting tomorrow, 2013-01-10 at 19:00 UTC in #fedora-meeting on the freenode network. Suggested topics: #topic New folks introductions and Apprentice tasks. If any new folks want to give a quick one line bio or any apprentices would like to ask general questions, they can do so in this part of the meeting. Don't be shy! #topic Freeze reminder / release tickets We need to make sure we are ready for release next week. #topic Applications status / discussion Check in on status of our applications: pkgdb, fas, bodhi, koji, community, voting, tagger, packager, dpsearch, etc. If there's new releases, bugs we need to work around or things to note. #topic Sysadmin status / discussion Here we talk about sysadmin related happenings from the previous week, or things that are upcoming. #topic Private Cloud status update / discussion Just to remind everyone we are in Final freeze: https://fedorahosted.org/fedora-infrastructure/browser/architecture/Envir... #topic Fudcon Please update https://fedoraproject.org/wiki/Fedora_infrastructure_tasks_2013 with any fudcon ideas and/or discuss on the list. Lets figure out where to focus our energy for fudcon. #topic Upcoming Tasks/Items #info 2012-12-11 to 2013-01-15 F18 Final Freeze #info 2013-01-15 F18 release. #info 2013-01-18 to 2013-01-20 FUDCON Lawrence #info 2013-01-29 f19 feature submission deadline. #topic Open Floor Submit your agenda items, as tickets in the trac instance and send a note replying to this thread. More info here: https://fedoraproject.org/wiki/Infrastructure/Meetings#Meetings Thanks kevin

11 years, 3 months

1
1
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

infrastructure January 2013