fwiw, there may also be an issue with the log entries being visible to journalctl: after a
reboot, there are more log entries, that, I think, originate from before the reboot:
…[last entry after yesterday’s reboot, followed by the logs post `sudo rpm-ostree install
toolbox`, then `sudo ostree admin finalize-staged`]
```
Aug 28 21:08:30 localhost.localdomain systemd[1]: ostree-finalize-staged.service: Consumed
8.211s CPU time.
-- Reboot --
Aug 29 11:12:12 localhost.localdomain systemd[1]: Finished OSTree Finalize Staged
Deployment.
Aug 29 11:32:23 localhost.localdomain systemd[1]: Stopping OSTree Finalize Staged
Deployment...
Aug 29 11:32:23 localhost.localdomain ostree[26417]: No deployment staged for
finalization
Aug 29 11:32:25 localhost.localdomain systemd[1]: ostree-finalize-staged.service:
Succeeded.
Aug 29 11:32:25 localhost.localdomain systemd[1]: Stopped OSTree Finalize Staged
Deployment.
```
On 29 Aug 2020, at 12:34, TimC
<tim+fedoraproject.org(a)coote.org> wrote:
Hi Dusty
Is this a likely culprit?
```
-- Reboot --
Aug 28 20:56:24 localhost.localdomain systemd[1]: Finished OSTree Finalize Staged
Deployment.
Aug 28 21:07:23 localhost.localdomain systemd[1]: Stopping OSTree Finalize Staged
Deployment...
Aug 28 21:07:23 localhost.localdomain ostree[14561]: Finalizing staged deployment
Aug 28 21:07:32 localhost.localdomain ostree[14561]: Copying /etc changes: 10 modified, 0
removed, 34 added
Aug 28 21:07:32 localhost.localdomain ostree[14561]: Copying /etc changes: 10 modified, 0
removed, 34 added
Aug 28 21:08:30 localhost.localdomain ostree[14561]: **
Aug 28 21:08:30 localhost.localdomain ostree[14561]:
OSTree:ERROR:src/libostree/ostree-sysroot-deploy.c:1775:install_deployment_kernel:
assertion failed (kernel_layout->bootcsum == bootcsum):
("02ec07fa832b4485887f6dbac19d0311e3>
Aug 28 21:08:30 localhost.localdomain ostree[14561]: Bail out!
OSTree:ERROR:src/libostree/ostree-sysroot-deploy.c:1775:install_deployment_kernel:
assertion failed (kernel_layout->bootcsum == bootcsum):
("02ec07fa832b4485887f6dba>
Aug 28 21:08:30 localhost.localdomain systemd[1]: ostree-finalize-staged.service: Control
process exited, code=dumped, status=6/ABRT
Aug 28 21:08:30 localhost.localdomain systemd[1]: ostree-finalize-staged.service: Failed
with result 'core-dump'.
Aug 28 21:08:30 localhost.localdomain systemd[1]: Stopped OSTree Finalize Staged
Deployment.
Aug 28 21:08:30 localhost.localdomain systemd[1]: ostree-finalize-staged.service:
Consumed 8.211s CPU time.
```
Note that this is from yesterday’s fail. When I tried again today, I only get this
(before reboot):
```
-- Reboot --
Aug 29 11:12:12 localhost.localdomain systemd[1]: Finished OSTree Finalize Staged
Deployment.
```
When I run `sudo ostree admin finalize-staged`, it fails, thus:
```
sudo ostree admin finalize-staged
Copying /etc changes: 10 modified, 0 removed, 34 added
**
OSTree:ERROR:src/libostree/ostree-sysroot-deploy.c:1775:install_deployment_kernel:
assertion failed (kernel_layout->bootcsum == bootcsum):
("02ec07fa832b4485887f6dbac19d0311e3039855cc6ebd57aefaafa4a3997d1e" ==
"fc8629fdb6f5355dd5359350296b619216cbc32e19887511caf75ee9d6aafbad")
Bail out!
OSTree:ERROR:src/libostree/ostree-sysroot-deploy.c:1775:install_deployment_kernel:
assertion failed (kernel_layout->bootcsum == bootcsum):
("02ec07fa832b4485887f6dbac19d0311e3039855cc6ebd57aefaafa4a3997d1e" ==
"fc8629fdb6f5355dd5359350296b619216cbc32e19887511caf75ee9d6aafbad")
Aborted
```
I’d guess that’s a fail originating somehow in my trying to increase the image and
filesystem in the download as my first attempts to layer packages just ran out of space.
The approach worked with Fedora-IoT 29 and was based on decompressing, appending 0’s to
the end of the file and then resizing the filesystem.
Would it make sense to confirm the cause by layering a single package onto the original
download, if that’s useful? I think that I will need some mechanism to increase the image
size, tho’ or I won’t be able to get many tools onto the pi.
Tim
> On 29 Aug 2020, at 06:02, Dusty Mabe <dusty(a)dustymabe.com> wrote:
>
>
>
> On 8/28/20 5:43 PM, TimC wrote:
>> Hullo
>>
>> I’m sure that I’m being a bit dim here and that I’ve seen this working. However.
>>
>> Starting with a downloaded image for a Pi (3b+), after a `rpm-ostree upgrade`, I
seem unable to deploy layered packages. They seem to install, but after the reboot,
they’re not there. As an example, I tried to drop `toolbox` onto the image so that I could
build some of my own rpms to run under systemd, using the approach here:
https://bit.ly/3b8Ivri. The initial status before installation looks like this:
>> ```
>> rpm-ostree status
>> State: idle
>> Deployments:
>> * ostree://fedora-iot:fedora/stable/aarch64/iot
>> Version: 32.20200817.0 (2020-08-17T15:28:18Z)
>> Commit:
ace3685f47d39f5d4b6065d49554cf9ada92da685541640298b53576895176ea
>> GPGSignature: Valid signature by
97A1AE57C3A2372CCA3A4ABA6C13026D12C944D0
>>
>> ostree://fedora-iot:fedora/stable/aarch64/iot
>> Version: 32.20200603.0 (2020-06-03T10:45:43Z)
>> Commit:
c02bd26925b4e849fd0e53f3645e97b5cb22f47d7614c5a047d6200c64b3421b
>> GPGSignature: Valid signature by
7D22D5867F2A4236474BF7B850CB390B3C3359C4
>> ```
>>
>> `sudo rpm-ostree install toolbox` progresses as I’d expect, creating a new
bootable deployment:
>> ```
>> [tim@localhost ~]$ sudo rpm-ostree install toolbox
>> Checking out tree ace3685... done
>> Enabled rpm-md repositories: fedora-cisco-openh264 updates fedora fedora-modular
updates-modular
>> rpm-md repo 'fedora-cisco-openh264' (cached); generated:
2020-03-17T20:10:43Z
>> rpm-md repo 'updates' (cached); generated: 2020-08-27T14:18:53Z
>> rpm-md repo 'fedora' (cached); generated: 2020-04-22T22:22:16Z
>> rpm-md repo 'fedora-modular' (cached); generated: 2020-04-22T20:58:40Z
>> rpm-md repo 'updates-modular' (cached); generated: 2020-08-27T14:52:01Z
>> Importing rpm-md... done
>> Resolving dependencies... done
>> Checking out packages... done
>> Running pre scripts... done
>> Running post scripts... done
>> Running posttrans scripts... done
>> Writing rpmdb... done
>> Writing OSTree commit... done
>> ⠉ Staging deployment...
>> Staging deployment... done
>>
>> Freed: 354.4?MB (pkgcache branches: 217)
>> Added:
>> flatpak-session-helper-1.6.5-1.fc32.aarch64
>> toolbox-0.0.93-1.fc32.aarch64
>> Run "systemctl reboot" to start a reboot
>>
>> ```
>>
>> and the status looks ok (ignoring the niggling error):
>> ```
>> [tim@localhost ~]$ rpm-ostree status
>> error: Timeout was reached
>> [tim@localhost ~]$ rpm-ostree status
>> State: idle
>> Deployments:
>> ostree://fedora-iot:fedora/stable/aarch64/iot
>> Version: 32.20200817.0 (2020-08-17T15:28:18Z)
>> BaseCommit:
ace3685f47d39f5d4b6065d49554cf9ada92da685541640298b53576895176ea
>> GPGSignature: Valid signature by
97A1AE57C3A2372CCA3A4ABA6C13026D12C944D0
>> Diff: 2 added
>> LayeredPackages: toolbox
>>
>> * ostree://fedora-iot:fedora/stable/aarch64/iot
>> Version: 32.20200817.0 (2020-08-17T15:28:18Z)
>> Commit:
ace3685f47d39f5d4b6065d49554cf9ada92da685541640298b53576895176ea
>> GPGSignature: Valid signature by
97A1AE57C3A2372CCA3A4ABA6C13026D12C944D0
>>
>> ostree://fedora-iot:fedora/stable/aarch64/iot
>> Version: 32.20200603.0 (2020-06-03T10:45:43Z)
>> Commit:
c02bd26925b4e849fd0e53f3645e97b5cb22f47d7614c5a047d6200c64b3421b
>> GPGSignature: Valid signature by
7D22D5867F2A4236474BF7B850CB390B3C3359C4
>> ```
>>
>> But when I reboot, that deployment isn’t the image used and it’s disappeared from
rpm-ostree’s world:
>> ```
>> [tim@localhost ~]$ sudo rpm-ostree status
>> State: idle
>> Deployments:
>> * ostree://fedora-iot:fedora/stable/aarch64/iot
>> Version: 32.20200817.0 (2020-08-17T15:28:18Z)
>> Commit:
ace3685f47d39f5d4b6065d49554cf9ada92da685541640298b53576895176ea
>> GPGSignature: Valid signature by
97A1AE57C3A2372CCA3A4ABA6C13026D12C944D0
>>
>> ostree://fedora-iot:fedora/stable/aarch64/iot
>> Version: 32.20200603.0 (2020-06-03T10:45:43Z)
>> Commit:
c02bd26925b4e849fd0e53f3645e97b5cb22f47d7614c5a047d6200c64b3421b
>> GPGSignature: Valid signature by
7D22D5867F2A4236474BF7B850CB390B3C3359C4
>> ```
>>
>> Did I forget how this type of layered installation should work?
>
>
> Seems like it should be working. This vaguely sounds like the deployment not getting
finalized.
>
> Does `sudo journalctl -u ostree-finalize-staged.service` show any errors? If it is
timing out for
> some reason you could try to manually run `sudo ostree admin finalize-staged`
*before* you type
> reboot to reboot into the new deployment so that you know it finishes.
>
> Dusty
_______________________________________________
IoT mailing list -- iot(a)lists.fedoraproject.org
To unsubscribe send an email to iot-leave(a)lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines:
https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/iot@lists.fedoraproject.org