The released images, and rawhide images, can be found at
Those URLs appear to be where the downloads I found are coming and they
even include the CHECKSUM files, but my confusion is more from the pages
that describe the options and then link to files located in the
sub directories. Also, along the paths I found, there
are some bad links.
Maybe my questions should be:
How do I navigate from getfedora.org
to downloading an IoT image from
So that I can figure out the answer to the next questions:
How do I navigate from the IoT Getting Started guide to downloading an IoT
image from dl.fedoraproject.org
On Thu, Jan 31, 2019 at 1:38 PM Troy Dawson <tdawson(a)redhat.com> wrote:
On Thu, Jan 31, 2019 at 10:19 AM Troy Dawson
> On Thu, Jan 31, 2019 at 9:58 AM Susan Lauber <laubersm(a)fedoraproject.org>
> > Hi,
> > As I begin to explore the IoT working group and the Getting Started
Guide, the first gap I am finding is a section for "Obtaining images".
> > Setting up a virtual machine starts (and pretty much ends) with
> > Setting up a physical device does have some references to using (but
not obtaining) Fedora-IoT-28-<BUILD ID> and Fedora-Rawhide.xz files.
> > So I started looking for the images.
> > I ended up with downloads from iot.stg.fedoraproject.org
but with no
CHECSUM files being found for verification.
> > It looks to me like these will eventually belong at
but I have not yet
determined the differences in those collections of aarch64 options. I was
expecting to find them at arm.fedoraproject.org
based on my past
experiments with my Pi.
> > I am going to need a bit of help on what are the correct pointers to
add to an Obtaining images section of the getting started guide.
> > Here are my notes on what pages show what information and where I
found dead links:
> > From the getfedora.org
page, at the bottom I do see
> > Fedora ARM -> https://arm.fedoraproject.org/
> > Alternative Downloads -> Alternate Architectures ->
> > Both pages have Server, Minimal, and Workstation but then they begin
> > Neither has anything labeled as IoT, however, the verify page for
> > https://arm.fedoraproject.org/verify.html
> > In the text, lists a gpg --verify-files key for IOT
> > Non of the -CHECKSUM files from this site include a Fedora-IoT image.
> > If I navigate to the Alt verify page at
> > Several of these links to CHECKSUM files cannot find the files. For
> > "The requested URL
/en/static/checksums/Fedora-Spins-29-1.2-aarch64-CHECKSUM was not found on
> > Next I found https://iot.stg.fedoraproject.org/
> > I downloaded the raw image (and have since gotten it setup in a
> > The verify page from this site looks like a copy of the arm site
verify page but only the page itself was copied over to the stg site. The
links to the CHECKSUM files are all "not found" and appear to be the same
base name as those used from the ARM site. Again, with no mentions of any
Fedora-IoT named files.
> > Comments welcome!
> > -Susan
> I'm pretty sure we don't want our documentation saying to get images
> from stc.fedoraproject.org
, at least not the final documentation.
> The released images, and rawhide images, can be found at
I wrote that before verifying where those download links when to.
Disregard what I said
IoT mailing list -- iot(a)lists.fedoraproject.org
To unsubscribe send an email to iot-leave(a)lists.fedoraproject.org
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
Susan Lauber, (CCAH, RHCX, RHCA, RHCSS, RHCVA, CISSP)
Lauber System Solutions, Inc.
gpg: 15AC F794 A3D9 64D1 D9CE 4C26 EFC3 11C2 BFA1 0974