Hi, everyone! We had a bit of a delay composing the Beta TC1 live images, but they're now up at:
http://serverbeach1.fedoraproject.org/pub/alt/stage/15-Beta.TC1/Live/
if everyone could help out with testing and filling in the desktop validation table at https://fedoraproject.org/wiki/Test_Results:Fedora_15_Beta_TC1_Desktop , that would be really great. Just ask me if you have any questions or uncertainties about the process. Thanks!
Sorry for the ignorance what is TC? I can install this to test in my laptop and can report finding. have a great day guys.
On Fri, Apr 1, 2011 at 2:36 PM, Adam Williamson awilliam@redhat.com wrote:
Hi, everyone! We had a bit of a delay composing the Beta TC1 live images, but they're now up at:
http://serverbeach1.fedoraproject.org/pub/alt/stage/15-Beta.TC1/Live/
if everyone could help out with testing and filling in the desktop validation table at https://fedoraproject.org/wiki/Test_Results:Fedora_15_Beta_TC1_Desktop , that would be really great. Just ask me if you have any questions or uncertainties about the process. Thanks! -- Adam Williamson Fedora QA Community Monkey IRC: adamw | Fedora Talk: adamwill AT fedoraproject DOT org http://www.happyassassin.net
kde mailing list kde@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/kde New to KDE4? - get help from http://userbase.kde.org
Joseph Marrero wrote:
Sorry for the ignorance what is TC?
Test Compose / Test Candidate i.e. it's one stage earlier than a Release Candidate (RC). It serves for testing, but is not a candidate for an actual release.
There will be at least one Beta RC after the Beta TC, and one of the RCs will become the actual F15 Beta.
Kevin Kofler
Mr. Kofler thanks I am downloading it already thank you for the info
On Fri, Apr 1, 2011 at 3:34 PM, Kevin Kofler kevin.kofler@chello.at wrote:
Joseph Marrero wrote:
Sorry for the ignorance what is TC?
Test Compose / Test Candidate i.e. it's one stage earlier than a Release Candidate (RC). It serves for testing, but is not a candidate for an actual release.
There will be at least one Beta RC after the Beta TC, and one of the RCs will become the actual F15 Beta.
Kevin Kofler
kde mailing list kde@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/kde New to KDE4? - get help from http://userbase.kde.org
Hi, everyone! We had a bit of a delay composing the Beta TC1 live images, but they're now up at:
http://serverbeach1.fedoraproject.org/pub/alt/stage/15-Beta.TC1/Live/
if everyone could help out with testing and filling in the desktop validation table at https://fedoraproject.org/wiki/Test_Results:Fedora_15_Beta_TC1_Desktop , that would be really great. Just ask me if you have any questions or uncertainties about the process. Thanks!
Hi,
This one is for me a total no go, sorry. I booted from an usb-stick and got stuck at the moment that I would expect kdm to start. A hard reset is necessary. Tried the following:
1. boot without Plymouth (remove rhgb and quiet) -> fail 2. boot into multi-user target (runlevel 3) -> start X -> succes 3. Same as 2. but start kdm -> succes
So it seems to me that it's no X problem. Any ideas wat component is failing? Is it systemd or dracut or ... ?
Thanks,
Martin Kho
hello For me booted well, both on a Inspiron N5010 with Intel HD graphics and in a PC with Nvidia 8000 graphics I connected to the net, opened dolphin, searched the harddrive contents and no problems in the laptop I enabled desktop efects and all went well, hope fully Tuesday I will Install it on the PCwhen I am back at the office. will report.
have a great On Sat, Apr 2, 2011 at 3:47 AM, Martin Kho lists.kho@gmail.com wrote:
Hi, everyone! We had a bit of a delay composing the Beta TC1 live images, but they're now up at:
http://serverbeach1.fedoraproject.org/pub/alt/stage/15-Beta.TC1/Live/
if everyone could help out with testing and filling in the desktop validation table at https://fedoraproject.org/wiki/Test_Results:Fedora_15_Beta_TC1_Desktop , that would be really great. Just ask me if you have any questions or uncertainties about the process. Thanks!
Hi,
This one is for me a total no go, sorry. I booted from an usb-stick and got stuck at the moment that I would expect kdm to start. A hard reset is necessary. Tried the following:
- boot without Plymouth (remove rhgb and quiet) -> fail
- boot into multi-user target (runlevel 3) -> start X -> succes
- Same as 2. but start kdm -> succes
So it seems to me that it's no X problem. Any ideas wat component is failing? Is it systemd or dracut or ... ?
Thanks,
Martin Kho _______________________________________________ kde mailing list kde@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/kde New to KDE4? - get help from http://userbase.kde.org
On Saturday 02 April 2011 10:14:28 Joseph Marrero wrote:
hello For me booted well, both on a Inspiron N5010 with Intel HD graphics and in a PC with Nvidia 8000 graphics I connected to the net, opened dolphin, searched the harddrive contents and no problems in the laptop I enabled desktop efects and all went well, hope fully Tuesday I will Install it on the PCwhen I am back at the office. will report.
have a great
On Sat, Apr 2, 2011 at 3:47 AM, Martin Kho lists.kho@gmail.com wrote:
Hi, everyone! We had a bit of a delay composing the Beta TC1 live images, but they're now up at:
http://serverbeach1.fedoraproject.org/pub/alt/stage/15-Beta.TC1/Live /
if everyone could help out with testing and filling in the desktop validation table at https://fedoraproject.org/wiki/Test_Results:Fedora_15_Beta_TC1_Deskt op , that would be really great. Just ask me if you have any questions or uncertainties about the process. Thanks!
Hi,
This one is for me a total no go, sorry. I booted from an usb-stick and got stuck at the moment that I would expect kdm to start. A hard reset is necessary. Tried the following:
- boot without Plymouth (remove rhgb and quiet) -> fail
- boot into multi-user target (runlevel 3) -> start X -> succes
- Same as 2. but start kdm -> succes
So it seems to me that it's no X problem. Any ideas wat component is failing? Is it systemd or dracut or ... ?
Hum ... running the iso in a vm works fine. So it does seem the case that it's a video issue. I have a nvidia GF 7600 GS. Anyone else is using this card?
Martin Kho
Btw. There are a lot of systemd messages in the dmesg output. "systemd[1]: systemd-ask-plymouth.path/stop would stop a running service systemd[1]: Deleting systemd-ask-password-plymouth.path/stop to minimize impact"
Thanks,
Martin Kho _______________________________________________ kde mailing list kde@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/kde New to KDE4? - get help from http://userbase.kde.org
On 04/02/2011 02:18 PM, Martin Kho wrote:
On Saturday 02 April 2011 10:14:28 Joseph Marrero wrote:
hello For me booted well, both on a Inspiron N5010 with Intel HD graphics and in a PC with Nvidia 8000 graphics I connected to the net, opened dolphin, searched the harddrive contents and no problems in the laptop I enabled desktop efects and all went well, hope fully Tuesday I will Install it on the PCwhen I am back at the office. will report.
have a great
On Sat, Apr 2, 2011 at 3:47 AM, Martin Kholists.kho@gmail.com wrote:
Hi, everyone! We had a bit of a delay composing the Beta TC1 live images, but they're now up at:
http://serverbeach1.fedoraproject.org/pub/alt/stage/15-Beta.TC1/Live /
if everyone could help out with testing and filling in the desktop validation table at https://fedoraproject.org/wiki/Test_Results:Fedora_15_Beta_TC1_Deskt op , that would be really great. Just ask me if you have any questions or uncertainties about the process. Thanks!
Hi,
This one is for me a total no go, sorry. I booted from an usb-stick and got stuck at the moment that I would expect kdm to start. A hard reset is necessary. Tried the following:
- boot without Plymouth (remove rhgb and quiet) -> fail
- boot into multi-user target (runlevel 3) -> start X -> succes
- Same as 2. but start kdm -> succes
So it seems to me that it's no X problem. Any ideas wat component is failing? Is it systemd or dracut or ... ?
Hum ... running the iso in a vm works fine. So it does seem the case that it's a video issue. I have a nvidia GF 7600 GS. Anyone else is using this card?
Works fine with a GeForce Go 7400.
Martin Kho
Btw. There are a lot of systemd messages in the dmesg output. "systemd[1]: systemd-ask-plymouth.path/stop would stop a running service systemd[1]: Deleting systemd-ask-password-plymouth.path/stop to minimize impact"
Thanks,
Martin Kho _______________________________________________ kde mailing list kde@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/kde New to KDE4? - get help from http://userbase.kde.org
kde mailing list kde@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/kde New to KDE4? - get help from http://userbase.kde.org
On Saturday 02 April 2011 16:11:20 Patrick Boutilier wrote:
On 04/02/2011 02:18 PM, Martin Kho wrote:
On Saturday 02 April 2011 10:14:28 Joseph Marrero wrote:
hello For me booted well, both on a Inspiron N5010 with Intel HD graphics and in a PC with Nvidia 8000 graphics I connected to the net, opened dolphin, searched the harddrive contents and no problems in the laptop I enabled desktop efects and all went well, hope fully Tuesday I will Install it on the PCwhen I am back at the office. will report.
have a great
On Sat, Apr 2, 2011 at 3:47 AM, Martin Kholists.kho@gmail.com wrote:
Hi, everyone! We had a bit of a delay composing the Beta TC1 live images, but they're now up at:
http://serverbeach1.fedoraproject.org/pub/alt/stage/15-Beta.TC1/Li ve /
if everyone could help out with testing and filling in the desktop validation table at https://fedoraproject.org/wiki/Test_Results:Fedora_15_Beta_TC1_Des kt op , that would be really great. Just ask me if you have any questions or uncertainties about the process. Thanks!
Hi,
This one is for me a total no go, sorry. I booted from an usb-stick and got stuck at the moment that I would expect kdm to start. A hard reset is necessary. Tried the following:
- boot without Plymouth (remove rhgb and quiet) -> fail
- boot into multi-user target (runlevel 3) -> start X -> succes
- Same as 2. but start kdm -> succes
So it seems to me that it's no X problem. Any ideas wat component is failing? Is it systemd or dracut or ... ?
Hum ... running the iso in a vm works fine. So it does seem the case that it's a video issue. I have a nvidia GF 7600 GS. Anyone else is using this card?
Works fine with a GeForce Go 7400.
Hi,
It seems I'm not the only one who has an issue with fc15_beta_tc1 [1]
Martin Kho
[1] https://bugzilla.redhat.com/show_bug.cgi?id=689825
Martin Kho
Btw. There are a lot of systemd messages in the dmesg output. "systemd[1]: systemd-ask-plymouth.path/stop would stop a running service systemd[1]: Deleting systemd-ask-password-plymouth.path/stop to minimize impact"
Thanks,
Martin Kho _______________________________________________ kde mailing list kde@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/kde New to KDE4? - get help from http://userbase.kde.org
kde mailing list kde@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/kde New to KDE4? - get help from http://userbase.kde.org
kde mailing list kde@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/kde New to KDE4? - get help from http://userbase.kde.org
Hi,
It seems I'm not the only one who has an issue with fc15_beta_tc1 [1]
Martin Kho
I installed it on Virtualbox from the netinst cd, and the firstboot doesn't appear. I see blank screen with no activity. I cannot switch to other virtual terminals either. Robert
On Sun, Apr 3, 2011 at 11:27, Rober Szalai robicjedi@gmail.com wrote:
Hi,
It seems I'm not the only one who has an issue with fc15_beta_tc1 [1]
Martin Kho
I installed it on Virtualbox from the netinst cd, and the firstboot doesn't appear. I see blank screen with no activity. I cannot switch to other virtual terminals either.
I only get this after updating from the live cd installation. So it must be one of the updated packages. It froze for me after Starting sendmail.
On Sunday 03 April 2011 16:34:30 Robert Xu wrote:
On Sun, Apr 3, 2011 at 11:27, Rober Szalai robicjedi@gmail.com wrote:
Hi,
It seems I'm not the only one who has an issue with fc15_beta_tc1 [1]
Martin Kho
I installed it on Virtualbox from the netinst cd, and the firstboot doesn't appear. I see blank screen with no activity. I cannot switch to other virtual terminals either.
I only get this after updating from the live cd installation. So it must be one of the updated packages. It froze for me after Starting sendmail.
Boot the kernel with option enforcing=0
there is not yet an update for the change in sistemd to introduce a \run top directory.
On Sunday 03 April 2011 17:17:57 José Matos wrote:
On Sunday 03 April 2011 16:34:30 Robert Xu wrote:
On Sun, Apr 3, 2011 at 11:27, Rober Szalai robicjedi@gmail.com wrote:
Hi,
It seems I'm not the only one who has an issue with fc15_beta_tc1 [1]
Martin Kho
I installed it on Virtualbox from the netinst cd, and the firstboot doesn't appear. I see blank screen with no activity. I cannot switch to other virtual terminals either.
I only get this after updating from the live cd installation. So it must be one of the updated packages. It froze for me after Starting sendmail.
Boot the kernel with option enforcing=0
there is not yet an update for the change in sistemd to introduce a \run top directory.
Hi,
FYI: I've installed selinux-policy-[targeted-]3.9.16-10.fc15 and systemd-[units-]22-1.fc15 from koji. These packages solved the /run issue for me.
Martin Kho