October 2014 - kernel - Fedora mailing-lists

Re: [kernel/f21] Make sure acpi brightness_switch is disabled (like forever in Fedora)
by Hans de Goede 29 Jul '15

29 Jul '15

Hi Josh, On 07/28/2014 07:04 PM, Josh Boyer wrote: > commit e6fe382d1d53d4cdf9b544729dc823d4eab0217c > Author: Josh Boyer <jwboyer(a)fedoraproject.org> > Date: Mon Jul 28 13:03:01 2014 -0400 > > Make sure acpi brightness_switch is disabled (like forever in Fedora) > > Upstream reverted the change to turn the ACPI brightness_switch_enabled > parameter off by default. Revert the revert so we go back to the state > Fedora has traditionally been in. Ack, I was planning on doing this myself but you beat me to it, thanks for taking care of this. Note that 3.17 will have this patch: https://git.kernel.org/cgit/linux/kernel/git/rafael/linux-pm.git/commit/?h=… Which fixes the 2 steps being taken for one keypress problem while keeping the acpi brightness_switch behavior enabled, so that people who have an acpi-video controlled backlight and a userspace which does not do backlight control (e.g. windowmaker). So for 3.17 we should IMHO drop the revert-revert and stick with upstream behavior. Alternatively we could apply that patch now instead of the revert-revert. Regards, Hans

3 7

fedora 14 kernel performance with ip forwarding workload
by Jesse Brandeburg 04 Jun '15

04 Jun '15

The other day I was running the stock fedora kernel on my ip forwarding setup, to see what the performance was, and the performance wasn't very good. system is S5520HC dual socket 2.93GHz Xeon 5570 (Nehalem) with 3 quad port 82580 adapters (12 ports). Traffic is bidirectional 64 byte packets being forwarded and received on each port, basically port to port routing. I am only using 12 flows currently. The driver is igb, and I am using an affinity script that lines up each pair of ports that are forwarding traffic into optimal configurations for cache locality. I am also disabling remote_node_defrag_ratio to stop cross node traffic. With the fedora default kernel from F14 it appears that CONFIG_NETFILTER=y means that I cannot unload all of netfilter even if I stop iptables service. perf showed netfilter being prominent, and removing it gives me much higher throughput. Is there a reason CONFIG_NETFILTER=y ? Isn't it a good thing to be able to disable netfilter if you want to? Jesse

5 9

FYI failed boot with 3.18.0-0.rc1.git1.2
by Bruno Wolff III 03 Nov '14

03 Nov '14

This one is more likely due to something in the initrd than the kernel. The boot got to where dbus was activated and then services started failing. Again I was in a hurrry and just went back to 3.18.0-0.rc0.git9.5 and the system booted normally.

2 4

CVE fixes in kernel-3.16.7-200.fc20
by Reindl Harald 31 Oct '14

31 Oct '14

i wonder if 3.16.7 contains all the 3.16.3 CVE-fixes from https://koji.fedoraproject.org/koji/buildinfo?buildID=587751 and the previous 3.16.6 ones from Fedora because https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.16.7 dont mention them?

2 2

fuse: failed to open /dev/fuse: Permission denied
by Reindl Harald 30 Oct '14

30 Oct '14

am i the only one which can't mount fuse as normal user with 3.16.6-203.fc20.x86_64? ______________________________________________ [harry@rh:~]$ mount /mnt/arrakis fuse: failed to open /dev/fuse: Permission denied [harry@rh:~]$ mount /mnt/mail-gw fuse: failed to open /dev/fuse: Permission denied [harry@rh:~]$ stat /dev/fuse Datei: „/dev/fuse“ Größe: 0 Blöcke: 0 EA Block: 4096 zeichenorientierte Spezialdatei Gerät: 5h/5d Inode: 14891 Verknüpfungen: 1 Gerätetyp: a,e5 Zugriff: (0600/crw-------) Uid: ( 0/ root) Gid: ( 0/ root) Zugriff : 2014-10-30 10:31:37.205256870 +0100 Modifiziert: 2014-10-30 10:31:37.205256870 +0100 Geändert : 2014-10-30 10:31:37.492258405 +0100 Geburt : -

2 2

INFO: task echo:622 blocked for more than 120 seconds. - 3.18.0-0.rc0.git
by poma 30 Oct '14

30 Oct '14

02:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 8400 GS Rev. 2] (rev a1) Chipset: G98 (NV98) Family : NV50 The same for all four kernel: - 3.18.0-0.rc0.git8.1.fc22.x86_64 - 3.18.0-0.rc0.git9.1.fc22.x86_64 - 3.18.0-0.rc0.git9.3.fc22.x86_64 - 3.18.0-0.rc0.git9.4.fc22.x86_64 after "fb: switching to nouveaufb from VESA VGA" display is powered off. The magic SysRq key sequence is necessary to reboot. Yet reached this this one recital: ... [ 5.860996] [drm] Initialized nouveau 1.2.1 20120801 for 0000:02:00.0 on minor 0 ... [ 240.229058] INFO: task echo:622 blocked for more than 120 seconds. [ 240.229594] Not tainted 3.18.0-0.rc0.git9.3.fc22.x86_64 #1 [ 240.230149] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.230661] echo D ffff8800c82a3480 12472 622 1 0x00000004 [ 240.231230] ffff8800ca2e3ac8 0000000000000096 ffff8800c82a3480 00000000001d5f00 [ 240.231784] ffff8800ca2e3fd8 00000000001d5f00 ffff880128bf0000 ffff8800c82a3480 [ 240.232344] ffffffff82c30990 7fffffffffffffff ffffffff81ee2698 ffffffff81ee2690 [ 240.232931] Call Trace: [ 240.233467] [<ffffffff8185baf9>] schedule+0x29/0x70 [ 240.234025] [<ffffffff81860d1c>] schedule_timeout+0x26c/0x410 [ 240.234562] [<ffffffff81028c4a>] ? native_sched_clock+0x2a/0xa0 [ 240.235118] [<ffffffff811078bc>] ? mark_held_locks+0x7c/0xb0 [ 240.235645] [<ffffffff81861da0>] ? _raw_spin_unlock_irq+0x30/0x50 [ 240.236198] [<ffffffff81107a4d>] ? trace_hardirqs_on_caller+0x15d/0x200 [ 240.236729] [<ffffffff8185d52c>] wait_for_completion+0x10c/0x150 [ 240.237290] [<ffffffff810e51f0>] ? wake_up_state+0x20/0x20 [ 240.237842] [<ffffffff8112a559>] _rcu_barrier+0x159/0x200 [ 240.238375] [<ffffffff8112a655>] rcu_barrier+0x15/0x20 [ 240.238913] [<ffffffff8171813f>] netdev_run_todo+0x6f/0x310 [ 240.239449] [<ffffffff817251ae>] rtnl_unlock+0xe/0x10 [ 240.239999] [<ffffffff8170ea35>] unregister_netdev+0x25/0x30 [ 240.240546] [<ffffffffa00222d2>] rtl_remove_one+0x62/0x230 [r8169] [ 240.241104] [<ffffffff814682cf>] pci_device_remove+0x3f/0xc0 [ 240.241642] [<ffffffff8155b34f>] __device_release_driver+0x7f/0xf0 [ 240.242180] [<ffffffff8155b3e5>] device_release_driver+0x25/0x40 [ 240.242712] [<ffffffff8146234c>] pci_stop_bus_device+0x9c/0xb0 [ 240.243259] [<ffffffff8146248e>] pci_stop_and_remove_bus_device_locked+0x1e/0x40 [ 240.243785] [<ffffffff8146b44c>] remove_store+0x7c/0x90 [ 240.244321] [<ffffffff81555f98>] dev_attr_store+0x18/0x30 [ 240.244858] [<ffffffff81302789>] sysfs_kf_write+0x49/0x60 [ 240.245375] [<ffffffff81301ac9>] kernfs_fop_write+0xf9/0x180 [ 240.245921] [<ffffffff8127305a>] vfs_write+0xba/0x200 [ 240.246439] [<ffffffff8186379c>] ? retint_swapgs+0x13/0x1b [ 240.246978] [<ffffffff81273bac>] SyS_write+0x5c/0xd0 [ 240.247491] [<ffffffff81862b69>] system_call_fastpath+0x12/0x17 [ 240.248025] 6 locks held by echo/622: [ 240.248532] #0: (sb_writers#3){.+.+.+}, at: [<ffffffff81273143>] vfs_write+0x1a3/0x200 [ 240.249104] #1: (&of->mutex){+.+.+.}, at: [<ffffffff81301a97>] kernfs_fop_write+0xc7/0x180 [ 240.249651] #2: (s_active#131){++++++}, at: [<ffffffff81300ce4>] kernfs_remove_self+0xf4/0x170 [ 240.250229] #3: (pci_rescan_remove_lock){+.+.+.}, at: [<ffffffff8145f167>] pci_lock_rescan_remove+0x17/0x20 [ 240.250779] #4: (&dev->mutex){......}, at: [<ffffffff8155b3dd>] device_release_driver+0x1d/0x40 [ 240.251358] #5: (rcu_sched_state.barrier_mutex){+.+...}, at: [<ffffffff8112a435>] _rcu_barrier+0x35/0x200 [ 241.303095] systemd[1]: start request repeated too quickly for lightdm.service [ 241.323052] systemd[1]: Unit lightdm.service entered failed state. [ 241.333101] systemd[1]: lightdm.service failed. [ 359.038325] INFO: task kworker/u16:2:81 blocked for more than 120 seconds. [ 359.039475] Not tainted 3.18.0-0.rc0.git9.3.fc22.x86_64 #1 [ 359.040004] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 359.040571] kworker/u16:2 D ffff880128131a40 10896 81 2 0x00000000 [ 359.041162] Workqueue: netns cleanup_net [ 359.041701] ffff8801275bba88 0000000000000096 ffff880128131a40 00000000001d5f00 [ 359.042280] ffff8801275bbfd8 00000000001d5f00 ffff880128bf3480 ffff880128131a40 [ 359.042856] ffff880128131a40 ffffffff81ee25e8 0000000000000246 ffff880128131a40 [ 359.043436] Call Trace: [ 359.043975] [<ffffffff8185c0a1>] schedule_preempt_disabled+0x31/0x80 [ 359.044542] [<ffffffff8185d8f3>] mutex_lock_nested+0x183/0x440 [ 359.045108] [<ffffffff8112a435>] ? _rcu_barrier+0x35/0x200 [ 359.045647] [<ffffffff81028c4a>] ? native_sched_clock+0x2a/0xa0 [ 359.046218] [<ffffffff8112a435>] ? _rcu_barrier+0x35/0x200 [ 359.046767] [<ffffffff8185f914>] ? __mutex_unlock_slowpath+0xc4/0x1c0 [ 359.047333] [<ffffffff8112a435>] _rcu_barrier+0x35/0x200 [ 359.047875] [<ffffffff8112a655>] rcu_barrier+0x15/0x20 [ 359.048433] [<ffffffff8171813f>] netdev_run_todo+0x6f/0x310 [ 359.048969] [<ffffffff8170cd35>] ? rollback_registered_many+0x265/0x2e0 [ 359.049528] [<ffffffff817251ae>] rtnl_unlock+0xe/0x10 [ 359.050062] [<ffffffff8170eb96>] default_device_exit_batch+0x156/0x180 [ 359.050624] [<ffffffff810fd6b0>] ? abort_exclusive_wait+0xb0/0xb0 [ 359.051185] [<ffffffff81706c43>] ops_exit_list.isra.1+0x53/0x60 [ 359.051720] [<ffffffff817077f0>] cleanup_net+0x100/0x1f0 [ 359.052271] [<ffffffff810ccdb8>] process_one_work+0x218/0x850 [ 359.052806] [<ffffffff810ccd1f>] ? process_one_work+0x17f/0x850 [ 359.053356] [<ffffffff810cd4d7>] ? worker_thread+0xe7/0x4a0 [ 359.053891] [<ffffffff810cd45b>] worker_thread+0x6b/0x4a0 [ 359.054444] [<ffffffff810cd3f0>] ? process_one_work+0x850/0x850 [ 359.054977] [<ffffffff810d37ab>] kthread+0x10b/0x130 [ 359.055521] [<ffffffff81028cc9>] ? sched_clock+0x9/0x10 [ 359.056054] [<ffffffff810d36a0>] ? kthread_create_on_node+0x250/0x250 [ 359.056600] [<ffffffff81862abc>] ret_from_fork+0x7c/0xb0 [ 359.057145] [<ffffffff810d36a0>] ? kthread_create_on_node+0x250/0x250 [ 359.057668] 4 locks held by kworker/u16:2/81: [ 359.058212] #0: ("%s""netns"){.+.+.+}, at: [<ffffffff810ccd1f>] process_one_work+0x17f/0x850 [ 359.058784] #1: (net_cleanup_work){+.+.+.}, at: [<ffffffff810ccd1f>] process_one_work+0x17f/0x850 [ 359.059376] #2: (net_mutex){+.+.+.}, at: [<ffffffff8170777c>] cleanup_net+0x8c/0x1f0 [ 359.059949] #3: (rcu_sched_state.barrier_mutex){+.+...}, at: [<ffffffff8112a435>] _rcu_barrier+0x35/0x200 [ 359.060566] INFO: task echo:622 blocked for more than 120 seconds. [ 359.061131] Not tainted 3.18.0-0.rc0.git9.3.fc22.x86_64 #1 [ 359.061666] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 359.062218] echo D ffff8800c82a3480 12472 622 1 0x00000004 [ 359.062783] ffff8800ca2e3ac8 0000000000000096 ffff8800c82a3480 00000000001d5f00 [ 359.063365] ffff8800ca2e3fd8 00000000001d5f00 ffff880128bf0000 ffff8800c82a3480 [ 359.063915] ffffffff82c30990 7fffffffffffffff ffffffff81ee2698 ffffffff81ee2690 [ 359.064499] Call Trace: [ 359.065029] [<ffffffff8185baf9>] schedule+0x29/0x70 [ 359.065590] [<ffffffff81860d1c>] schedule_timeout+0x26c/0x410 [ 359.066141] [<ffffffff81028c4a>] ? native_sched_clock+0x2a/0xa0 [ 359.066664] [<ffffffff811078bc>] ? mark_held_locks+0x7c/0xb0 [ 359.067208] [<ffffffff81861da0>] ? _raw_spin_unlock_irq+0x30/0x50 [ 359.067723] [<ffffffff81107a4d>] ? trace_hardirqs_on_caller+0x15d/0x200 [ 359.068265] [<ffffffff8185d52c>] wait_for_completion+0x10c/0x150 [ 359.068789] [<ffffffff810e51f0>] ? wake_up_state+0x20/0x20 [ 359.069334] [<ffffffff8112a559>] _rcu_barrier+0x159/0x200 [ 359.069846] [<ffffffff8112a655>] rcu_barrier+0x15/0x20 [ 359.070378] [<ffffffff8171813f>] netdev_run_todo+0x6f/0x310 [ 359.070890] [<ffffffff817251ae>] rtnl_unlock+0xe/0x10 [ 359.071417] [<ffffffff8170ea35>] unregister_netdev+0x25/0x30 [ 359.071951] [<ffffffffa00222d2>] rtl_remove_one+0x62/0x230 [r8169] [ 359.072499] [<ffffffff814682cf>] pci_device_remove+0x3f/0xc0 [ 359.073015] [<ffffffff8155b34f>] __device_release_driver+0x7f/0xf0 [ 359.073557] [<ffffffff8155b3e5>] device_release_driver+0x25/0x40 [ 359.074067] [<ffffffff8146234c>] pci_stop_bus_device+0x9c/0xb0 [ 359.074602] [<ffffffff8146248e>] pci_stop_and_remove_bus_device_locked+0x1e/0x40 [ 359.075141] [<ffffffff8146b44c>] remove_store+0x7c/0x90 [ 359.075658] [<ffffffff81555f98>] dev_attr_store+0x18/0x30 [ 359.076192] [<ffffffff81302789>] sysfs_kf_write+0x49/0x60 [ 359.076710] [<ffffffff81301ac9>] kernfs_fop_write+0xf9/0x180 [ 359.077249] [<ffffffff8127305a>] vfs_write+0xba/0x200 [ 359.077758] [<ffffffff8186379c>] ? retint_swapgs+0x13/0x1b [ 359.078283] [<ffffffff81273bac>] SyS_write+0x5c/0xd0 [ 359.078796] [<ffffffff81862b69>] system_call_fastpath+0x12/0x17 [ 359.079326] 6 locks held by echo/622: [ 359.079829] #0: (sb_writers#3){.+.+.+}, at: [<ffffffff81273143>] vfs_write+0x1a3/0x200 [ 359.080405] #1: (&of->mutex){+.+.+.}, at: [<ffffffff81301a97>] kernfs_fop_write+0xc7/0x180 [ 359.080957] #2: (s_active#131){++++++}, at: [<ffffffff81300ce4>] kernfs_remove_self+0xf4/0x170 [ 359.081531] #3: (pci_rescan_remove_lock){+.+.+.}, at: [<ffffffff8145f167>] pci_lock_rescan_remove+0x17/0x20 [ 359.082133] #4: (&dev->mutex){......}, at: [<ffffffff8155b3dd>] device_release_driver+0x1d/0x40 [ 359.082699] #5: (rcu_sched_state.barrier_mutex){+.+...}, at: [<ffffffff8112a435>] _rcu_barrier+0x35/0x200 [ 380.911219] systemd-journald[386]: Received request to flush runtime journal from PID 1 [ 383.238185] systemd-journald[386]: Received request to flush runtime journal from PID 1 [ 383.559763] systemd[1]: Unit lightdm.service entered failed state. [ 383.569825] systemd[1]: lightdm.service failed. [ 385.570803] systemd[1]: lightdm.service failed. [ 479.091518] INFO: task kworker/u16:2:81 blocked for more than 120 seconds. [ 479.092050] Not tainted 3.18.0-0.rc0.git9.3.fc22.x86_64 #1 [ 479.092608] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 479.093093] kworker/u16:2 D ffff880128131a40 10896 81 2 0x00000000 [ 479.093650] Workqueue: netns cleanup_net [ 479.094110] ffff8801275bba88 0000000000000096 ffff880128131a40 00000000001d5f00 [ 479.094594] ffff8801275bbfd8 00000000001d5f00 ffff880128bf3480 ffff880128131a40 [ 479.095040] ffff880128131a40 ffffffff81ee25e8 0000000000000246 ffff880128131a40 [ 479.095485] Call Trace: [ 479.095874] [<ffffffff8185c0a1>] schedule_preempt_disabled+0x31/0x80 [ 479.096246] [<ffffffff8185d8f3>] mutex_lock_nested+0x183/0x440 [ 479.096634] [<ffffffff8112a435>] ? _rcu_barrier+0x35/0x200 [ 479.096986] [<ffffffff81028c4a>] ? native_sched_clock+0x2a/0xa0 [ 479.097367] [<ffffffff8112a435>] ? _rcu_barrier+0x35/0x200 [ 479.097712] [<ffffffff8185f914>] ? __mutex_unlock_slowpath+0xc4/0x1c0 [ 479.098061] [<ffffffff8112a435>] _rcu_barrier+0x35/0x200 [ 479.098425] [<ffffffff8112a655>] rcu_barrier+0x15/0x20 [ 479.098771] [<ffffffff8171813f>] netdev_run_todo+0x6f/0x310 [ 479.099109] [<ffffffff8170cd35>] ? rollback_registered_many+0x265/0x2e0 [ 479.099485] [<ffffffff817251ae>] rtnl_unlock+0xe/0x10 [ 479.099828] [<ffffffff8170eb96>] default_device_exit_batch+0x156/0x180 [ 479.100181] [<ffffffff810fd6b0>] ? abort_exclusive_wait+0xb0/0xb0 [ 479.100572] [<ffffffff81706c43>] ops_exit_list.isra.1+0x53/0x60 [ 479.100935] [<ffffffff817077f0>] cleanup_net+0x100/0x1f0 [ 479.101323] [<ffffffff810ccdb8>] process_one_work+0x218/0x850 [ 479.101689] [<ffffffff810ccd1f>] ? process_one_work+0x17f/0x850 [ 479.102039] [<ffffffff810cd4d7>] ? worker_thread+0xe7/0x4a0 [ 479.102420] [<ffffffff810cd45b>] worker_thread+0x6b/0x4a0 [ 479.102773] [<ffffffff810cd3f0>] ? process_one_work+0x850/0x850 [ 479.103138] [<ffffffff810d37ab>] kthread+0x10b/0x130 [ 479.103529] [<ffffffff81028cc9>] ? sched_clock+0x9/0x10 [ 479.103912] [<ffffffff810d36a0>] ? kthread_create_on_node+0x250/0x250 [ 479.104315] [<ffffffff81862abc>] ret_from_fork+0x7c/0xb0 [ 479.104714] [<ffffffff810d36a0>] ? kthread_create_on_node+0x250/0x250 [ 479.105111] 4 locks held by kworker/u16:2/81: [ 479.105543] #0: ("%s""netns"){.+.+.+}, at: [<ffffffff810ccd1f>] process_one_work+0x17f/0x850 [ 479.105997] #1: (net_cleanup_work){+.+.+.}, at: [<ffffffff810ccd1f>] process_one_work+0x17f/0x850 [ 479.106485] #2: (net_mutex){+.+.+.}, at: [<ffffffff8170777c>] cleanup_net+0x8c/0x1f0 [ 479.106966] #3: (rcu_sched_state.barrier_mutex){+.+...}, at: [<ffffffff8112a435>] _rcu_barrier+0x35/0x200 [ 479.107496] INFO: task echo:622 blocked for more than 120 seconds. [ 479.107958] Not tainted 3.18.0-0.rc0.git9.3.fc22.x86_64 #1 [ 479.108450] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 479.108941] echo D ffff8800c82a3480 12472 622 1 0x00000004 [ 479.109494] ffff8800ca2e3ac8 0000000000000096 ffff8800c82a3480 00000000001d5f00 [ 479.110038] ffff8800ca2e3fd8 00000000001d5f00 ffff880128bf0000 ffff8800c82a3480 [ 479.110596] ffffffff82c30990 7fffffffffffffff ffffffff81ee2698 ffffffff81ee2690 [ 479.111143] Call Trace: [ 479.111694] [<ffffffff8185baf9>] schedule+0x29/0x70 [ 479.112236] [<ffffffff81860d1c>] schedule_timeout+0x26c/0x410 [ 479.112786] [<ffffffff81028c4a>] ? native_sched_clock+0x2a/0xa0 [ 479.113331] [<ffffffff811078bc>] ? mark_held_locks+0x7c/0xb0 [ 479.113853] [<ffffffff81861da0>] ? _raw_spin_unlock_irq+0x30/0x50 [ 479.114393] [<ffffffff81107a4d>] ? trace_hardirqs_on_caller+0x15d/0x200 [ 479.114917] [<ffffffff8185d52c>] wait_for_completion+0x10c/0x150 [ 479.115459] [<ffffffff810e51f0>] ? wake_up_state+0x20/0x20 [ 479.115975] [<ffffffff8112a559>] _rcu_barrier+0x159/0x200 [ 479.116510] [<ffffffff8112a655>] rcu_barrier+0x15/0x20 [ 479.117028] [<ffffffff8171813f>] netdev_run_todo+0x6f/0x310 [ 479.117553] [<ffffffff817251ae>] rtnl_unlock+0xe/0x10 [ 479.118067] [<ffffffff8170ea35>] unregister_netdev+0x25/0x30 [ 479.118617] [<ffffffffa00222d2>] rtl_remove_one+0x62/0x230 [r8169] [ 479.119140] [<ffffffff814682cf>] pci_device_remove+0x3f/0xc0 [ 479.119688] [<ffffffff8155b34f>] __device_release_driver+0x7f/0xf0 [ 479.120196] [<ffffffff8155b3e5>] device_release_driver+0x25/0x40 [ 479.120722] [<ffffffff8146234c>] pci_stop_bus_device+0x9c/0xb0 [ 479.121243] [<ffffffff8146248e>] pci_stop_and_remove_bus_device_locked+0x1e/0x40 [ 479.121782] [<ffffffff8146b44c>] remove_store+0x7c/0x90 [ 479.122323] [<ffffffff81555f98>] dev_attr_store+0x18/0x30 [ 479.122838] [<ffffffff81302789>] sysfs_kf_write+0x49/0x60 [ 479.123364] [<ffffffff81301ac9>] kernfs_fop_write+0xf9/0x180 [ 479.123882] [<ffffffff8127305a>] vfs_write+0xba/0x200 [ 479.124416] [<ffffffff8186379c>] ? retint_swapgs+0x13/0x1b [ 479.124928] [<ffffffff81273bac>] SyS_write+0x5c/0xd0 [ 479.125460] [<ffffffff81862b69>] system_call_fastpath+0x12/0x17 [ 479.125968] 6 locks held by echo/622: [ 479.126498] #0: (sb_writers#3){.+.+.+}, at: [<ffffffff81273143>] vfs_write+0x1a3/0x200 [ 479.127054] #1: (&of->mutex){+.+.+.}, at: [<ffffffff81301a97>] kernfs_fop_write+0xc7/0x180 [ 479.127624] #2: (s_active#131){++++++}, at: [<ffffffff81300ce4>] kernfs_remove_self+0xf4/0x170 [ 479.128192] #3: (pci_rescan_remove_lock){+.+.+.}, at: [<ffffffff8145f167>] pci_lock_rescan_remove+0x17/0x20 [ 479.128773] #4: (&dev->mutex){......}, at: [<ffffffff8155b3dd>] device_release_driver+0x1d/0x40 [ 479.129361] #5: (rcu_sched_state.barrier_mutex){+.+...}, at: [<ffffffff8112a435>] _rcu_barrier+0x35/0x200 ... Ref. http://koji.fedoraproject.org/koji/packageinfo?packageID=8

3 11

should we consider making CoDel the default to combat bufferbloat?
by Matthew Miller 29 Oct '14

29 Oct '14

Reading https://lwn.net/Articles/616241/, getting myself in happily over my level of actual knowledge about the state of things. >From that article, it seems like it might be worth trying net.core.default_qdisc = fq_codel by default. Just tossing this out there for the consideration of someone who really knows what they're talking about in this area. -- Matthew Miller <mattdm(a)fedoraproject.org> Fedora Project Leader

9 13

Overlayfs in rawhide
by Josh Boyer 27 Oct '14

27 Oct '14

Hi All, A quick FYI for those that don't follow kernel news often. Overlayfs has been merged into the mainline kernel with 3.18-rc2. We've been carrying this in the kernel-playground COPR for a while and it is now enabled in the standard Fedora kernels. Enjoy and report bugs upstream ;). josh

3 2

[PATCH] kernel.spec: enable building of perf with libnuma support
by Petr Holasek 24 Oct '14

24 Oct '14

Patch makes perf package dependent on numactl-devel and so enables numa subsystem benchmarks for perf bench command. numactl-devel is added to the buildroot just for x86 archs, because we don't ship libnuma for any others architectures. Can be easily reproduced by calling 'perf bench numa mem -a': - current output: 'Unknown subsystem:numa' - built with this patch: 'Running numa/mem benchmark...' Signed-off-by: Petr Holasek <pholasek(a)redhat.com> --- kernel.spec | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel.spec b/kernel.spec index 838712d..6a2a04c 100644 --- a/kernel.spec +++ b/kernel.spec @@ -386,6 +386,9 @@ BuildRequires: sparse %if %{with_perf} BuildRequires: elfutils-devel zlib-devel binutils-devel newt-devel python-devel perl(ExtUtils::Embed) bison flex BuildRequires: audit-libs-devel +%ifarch %{ix86} x86_64 +BuildRequires: numactl-devel +%endif %endif %if %{with_tools} BuildRequires: pciutils-devel gettext ncurses-devel @@ -1754,7 +1757,7 @@ BuildKernel %make_target %kernel_image %endif %global perf_make \ - make -s %{?cross_opts} %{?_smp_mflags} -C tools/perf V=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_LIBNUMA=1 NO_STRLCPY=1 NO_BIONIC=1 prefix=%{_prefix} + make -s %{?cross_opts} %{?_smp_mflags} -C tools/perf V=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 prefix=%{_prefix} %if %{with_perf} # perf %{perf_make} DESTDIR=$RPM_BUILD_ROOT all -- 1.9.3

5 9

FYI: I have seen one rc0.git9 early boot crash
by Bruno Wolff III 17 Oct '14

17 Oct '14

I didn't have time to futz with things further this morning, but one of three machines I tried 3.18.0-0.rc0.git9.2.fc22.1 crashed very early in the boot process. Since I was in a hurry I just tried 3.18.0-0.rc0.git8.2.fc22.1 and it worked. I probably won't get a chance to play with it tonight, but if I can get consistent failures (with whatever the latest version is when I do get time), I'll open a bug.

3 3

support for l7-filter
by George Karakougioumtzis 17 Oct '14

17 Oct '14

As i was trying to integrate deep packet inspection in my host i noticed that there wasnt support for l7-filter in the kernel as a module?

2 2

drm_kms_helper.edid_firmware=DVI-I-1 - resume(S3) - DVI-I-2: EDID broken
by poma 10 Oct '14

10 Oct '14

[ 0.000000] Linux version 3.18.0-0.rc0.git2.1.fc22.x86_64 (mockbuild(a)bkernel01.phx2.fedoraproject.org) (gcc version 4.9.1 20140930 (Red Hat 4.9.1-11) (GCC) ) #1 SMP Thu Oct 9 13:57:38 UTC 2014 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.18.0-0.rc0.git2.1.fc22.x86_64 root=UUID=a07556d2-6fe2-417f-8202-c54c07fd9386 drm_kms_helper.edid_firmware=DVI-I-1:edid/848x480.bin initrd=/initramfs-3.18.0-0.rc0.git2.1.fc22.x86_64.img [ 4.396325] usb 1-6: new high-speed USB device number 7 using ehci-pci [ 4.520203] usb 1-6: New USB device found, idVendor=17e9, idProduct=019e [ 4.520357] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.520499] usb 1-6: Product: FY USB-DVI [ 4.520629] usb 1-6: Manufacturer: DisplayLink [ 4.520761] usb 1-6: SerialNumber: USB_FY1704 [ 23.261365] [drm] Initialized drm 1.1.0 20060810 [ 24.415915] [drm] vendor descriptor length:1b data:1b 5f 01 00 19 05 00 01 03 00 04 [ 24.734381] [drm] Got external EDID base block and 0 extensions from "edid/848x480.bin" for connector "DVI-I-1" [ 24.749973] open /dev/fb0 user=0 fb_info=ffff8800c68ae000 count=1 [ 24.762202] [drm] write mode info 153 [ 24.785148] Console: switching to colour frame buffer device 106x30 [ 24.799662] udl 1-6:1.0: fb0: udldrmfb frame buffer device [ 24.799731] udl 1-6:1.0: registered panic notifier [ 24.808392] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 24.810304] [drm] No driver support for vblank timestamp query. [ 24.812697] [drm] Initialized udl 0.0.1 20120220 on minor 0 [ 24.815622] usbcore: registered new interface driver udl [ 35.269700] [drm] Got external EDID base block and 0 extensions from "edid/848x480.bin" for connector "DVI-I-1" [ 35.275096] [drm] Got external EDID base block and 0 extensions from "edid/848x480.bin" for connector "DVI-I-1" [ 35.344093] [drm] write mode info 153 [ 36.950930] [drm] Got external EDID base block and 0 extensions from "edid/848x480.bin" for connector "DVI-I-1" [ 325.799612] PM: Preparing system for mem sleep [ 326.067140] PM: Entering mem sleep [ 326.068158] Suspending console(s) (use no_console_suspend to debug) [ 329.397361] PM: suspend of devices complete after 3323.665 msecs [ 329.397371] PM: suspend devices took 3.329 seconds [ 329.409465] PM: late suspend of devices complete after 12.074 msecs [ 329.420591] ehci-pci 0000:00:04.1: System wakeup enabled by ACPI [ 329.431399] PM: noirq suspend of devices complete after 21.916 msecs [ 329.431455] ACPI: Preparing to enter system sleep state S3 [ 329.840517] PM: Saving platform NVS memory [ 329.905021] ACPI: Low-level resume complete [ 329.905021] PM: Restoring platform NVS memory [ 329.976500] ACPI: Waking up from system sleep state S3 [ 329.999944] ehci-pci 0000:00:04.1: System wakeup disabled by ACPI [ 330.003489] PM: noirq resume of devices complete after 19.016 msecs [ 330.012769] PM: early resume of devices complete after 9.022 msecs [ 332.101657] PM: resume of devices complete after 2088.867 msecs [ 332.113620] [drm] vendor descriptor length:1b data:1b 5f 01 00 19 05 00 01 03 00 04 [ 332.246592] Raw EDID: [ 332.246599] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.246603] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.246606] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.246609] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.246612] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.246615] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.246619] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.246622] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.246632] udl 1-6:1.0: DVI-I-2: EDID invalid. [ 332.262425] udl 1-6:1.0: fb2: udldrmfb frame buffer device [ 332.262492] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 332.262495] [drm] No driver support for vblank timestamp query. [ 332.262507] [drm] Initialized udl 0.0.1 20120220 on minor 2 [ 332.274311] PM: resume devices took 2.262 seconds [ 332.320387] PM: Finishing wakeup. [ 332.661252] Raw EDID: [ 332.661267] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.661277] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.661287] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.661296] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.661306] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.661317] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.661326] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.661336] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.661350] udl 1-6:1.0: DVI-I-2: EDID invalid. [ 332.791128] Raw EDID: [ 332.791148] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.791159] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.791169] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.791178] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.791188] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.791198] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.791208] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.791218] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 332.791234] udl 1-6:1.0: DVI-I-2: EDID invalid. [ 342.072576] [drm] wait for urb interrupted: ffffffc2 available: 4 [ 342.578079] Raw EDID: [ 342.578096] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.578103] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.578108] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.578114] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.578119] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.578125] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.578130] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.578136] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.578147] udl 1-6:1.0: DVI-I-2: EDID invalid. [ 342.707077] Raw EDID: [ 342.707093] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.707100] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.707105] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.707111] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.707116] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.707122] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.707127] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.707133] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 342.707144] udl 1-6:1.0: DVI-I-2: EDID invalid. [ 342.746100] [drm] write mode info 153 [ 343.346381] Raw EDID: [ 343.346399] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 343.346406] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 343.346412] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 343.346417] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 343.346423] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 343.346428] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 343.346434] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 343.346440] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 343.346452] udl 1-6:1.0: DVI-I-2: EDID invalid.

1 0

[PATCH] GFS2: Make rename not save dirent location
by Bob Peterson 07 Oct '14

07 Oct '14

Hi, This patch fixes a regression in the patch "GFS2: Remember directory insert point", commit 2b47dad866d04f14c328f888ba5406057b8c7d33. The problem had to do with the rename function: The function found space for the new dirent, and remembered that location. But then the old dirent was removed, which often moved the eligible location for the renamed dirent. Putting the new dirent at the saved location caused file system corruption. This patch adds a new "save_loc" variable to struct gfs2_diradd. If 1, the dirent location is saved. If 0, the dirent location is not saved and the buffer_head is released as per previous behavior. Signed-off-by: Bob Peterson <rpeterso(a)redhat.com> Signed-off-by: Steven Whitehouse <swhiteho(a)redhat.com> --- diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c index 1a349f9..5d4261f 100644 --- a/fs/gfs2/dir.c +++ b/fs/gfs2/dir.c @@ -2100,8 +2100,13 @@ int gfs2_diradd_alloc_required(struct inode *inode, const struct qstr *name, } if (IS_ERR(dent)) return PTR_ERR(dent); - da->bh = bh; - da->dent = dent; + + if (da->save_loc) { + da->bh = bh; + da->dent = dent; + } else { + brelse(bh); + } return 0; } diff --git a/fs/gfs2/dir.h b/fs/gfs2/dir.h index 126c65d..e1b309c 100644 --- a/fs/gfs2/dir.h +++ b/fs/gfs2/dir.h @@ -23,6 +23,7 @@ struct gfs2_diradd { unsigned nr_blocks; struct gfs2_dirent *dent; struct buffer_head *bh; + int save_loc; }; extern struct inode *gfs2_dir_search(struct inode *dir, diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c index 9516f5c..fcf42ea 100644 --- a/fs/gfs2/inode.c +++ b/fs/gfs2/inode.c @@ -600,7 +600,7 @@ static int gfs2_create_inode(struct inode *dir, struct dentry *dentry, int error, free_vfs_inode = 0; u32 aflags = 0; unsigned blocks = 1; - struct gfs2_diradd da = { .bh = NULL, }; + struct gfs2_diradd da = { .bh = NULL, .save_loc = 1, }; if (!name->len || name->len > GFS2_FNAMESIZE) return -ENAMETOOLONG; @@ -900,7 +900,7 @@ static int gfs2_link(struct dentry *old_dentry, struct inode *dir, struct gfs2_inode *ip = GFS2_I(inode); struct gfs2_holder ghs[2]; struct buffer_head *dibh; - struct gfs2_diradd da = { .bh = NULL, }; + struct gfs2_diradd da = { .bh = NULL, .save_loc = 1, }; int error; if (S_ISDIR(inode->i_mode)) @@ -1338,7 +1338,7 @@ static int gfs2_rename(struct inode *odir, struct dentry *odentry, struct gfs2_rgrpd *nrgd; unsigned int num_gh; int dir_rename = 0; - struct gfs2_diradd da = { .nr_blocks = 0, }; + struct gfs2_diradd da = { .nr_blocks = 0, .save_loc = 0, }; unsigned int x; int error;

2 3

F21 version is now ahead of rawhide version
by Bruno Wolff III 07 Oct '14

07 Oct '14

I don't think it is worth doing another build just for this, but if there is another 3.17 build in rawhide, it would be nice to use a release in the 400s so it stays ahead of the f21 version.

4 5

Fedora kernel git tree: each patch typically gets one line of change everyday
by Thorsten Leemhuis 07 Oct '14

07 Oct '14

Lo! Quoting http://jwboyer.livejournal.com/49254.html > […] > Since we're rebasing the patches in git, we don't need to do it > separately in the Fedora package repo. There's no sense in doing work > twice. After some initial renaming of some patches and such, I now > use the git tree to generate the patches we add to the spec file by > using git format-patch master.. and a script to copy them to the > working dir on my machine. This means we always have a nice fresh > copy of the patches for that specific upstream base. It does mean > that each patch typically gets one line of change (the sha hash of > the commit) everyday, but I don't think that's a big deal. This > actually saves me time now and it helps keep our patches fairly > "clean". They all apply with git-am and most of them have changelogs > and such. I'm all for making your life easier ;-) But is there maybe some easy way to avoid that "one line of change" per patch? Maybe some sed-call that removes or modifies the commit id sha1sum when the patches get readded to the package repo? It would avoid clutter in the git history and commits diffs. I'd welcome that, because I keep a eye on the kernel changes via the scm-commits mailing list. And it got a lot harder now to see what actually changed. See yourself by comparing these two mails: https://lists.fedoraproject.org/pipermail/scm-commits/Week-of-Mon-20140811/… https://lists.fedoraproject.org/pipermail/scm-commits/Week-of-Mon-20140922/… CU knurd

2 3

3.17 for F21
by Josh Boyer 06 Oct '14

06 Oct '14

Hi All, Since everyone likes to keep asking, we're going to be moving F21 to 3.17 when it's released [1]. There is ample time before Beta to shake bugs out and sticking with 3.16 until GA would simply mean we're shipping a kernel that likely won't be supported at the time of release [2]. josh [1] Linus was originally hoping to release it this weekend, but I believe a 3.17-rc7 will come out instead. We'll rebase when the final release is done. [2] We may still run this risk, depending on slips and such but at least we'll be as current as possible. p.s. F20 will get a rebase likely around 3.17.1 or 3.17.2. Be patient or upgrade to F21. F19 is in zombie state and will track the 3.14.y longterm kernels until EOL (which can't come soon enough).

2 2

Is the Fedora kernel git tree suitable for bisects?
by Bruno Wolff III 02 Oct '14

02 Oct '14

If one wanted to bisect a kernel with Fedora changes instead of Linus' kernel, would this likely work well?

2 1

[PATCH] enable virtualization on PPC LE
by Dan Horák 02 Oct '14

02 Oct '14

--- config-powerpc64le | 1 - 1 file changed, 1 deletion(-) diff --git a/config-powerpc64le b/config-powerpc64le index bd4d1ec..94fbbfc 100644 --- a/config-powerpc64le +++ b/config-powerpc64le @@ -1,4 +1,3 @@ -# CONFIG_VIRTUALIZATION is not set CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CARL9170 is not set -- 1.9.3

2 1

[PATCH] enable BPF on PPC LE (#1148933)
by Dan Horák 02 Oct '14

02 Oct '14

--- config-powerpc64le | 1 - 1 file changed, 1 deletion(-) diff --git a/config-powerpc64le b/config-powerpc64le index 8fb9796..bd4d1ec 100644 --- a/config-powerpc64le +++ b/config-powerpc64le @@ -1,5 +1,4 @@ # CONFIG_VIRTUALIZATION is not set -# CONFIG_BPF_JIT is not set CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CARL9170 is not set -- 1.9.3

2 1

perl script to check for references to unknown Kconfig macros
by Paul Bolle 02 Oct '14

02 Oct '14

Josh, Here's a perl script I cobbled together that checks for references to unknown Kconfig macros. Tested on top of current master. Invoke like this: perl "$WHAT_SHALL_I_CALL_THIS.pl" $SOME_DIR/kernel-3.16.fc20/linux-3.17.0-0.rc7.git1.1.fc20.x86_64 (I stopped tracking rawhide long ago.) I'll send a patch generated with the aid of this script shortly. It seems overkill to invoke (something like) this every build. But perhaps the package maintainers can include (something like) it before they push changes into master. The call of "glob("config-*")" is an accident waiting to happen, but I couldn't be bothered to replace it with a call of "git ls-files "config-*"". Have fun! Paul Bolle # By Paul Bolle October 2014. # # Contributed to the public domain by its author. use 5.016; use warnings; use autodie; use File::Find; my @Kconfigs; my $Kconfigre = qr/Kconfig.*/; my $configre = qr/^\s*(menu)?config\s+(?<config>(\w+))$/; my $CONFIG_re = qr/\bCONFIG_(?<CONFIG_>(\w+))/; sub match { push( @Kconfigs, $File::Find::name ) if ($_ =~ $Kconfigre); } sub parse_kconfig { my ($path) = @_; my @ret; open( my $kconfig, "<", $path ); my $slurp = do { local $/ = undef; <$kconfig> }; close( $kconfig ); my @lines = split ( /\n/, $slurp ); foreach my $line (@lines) { if ($line =~ /$configre/) { push( @ret, $+{config} ); } } @ret; } sub parse_shipped { my ($path) = @_; my @ret; open( my $shipped, "<", $path ); my $slurp = do { local $/ = undef; <$shipped> }; close( $shipped ); my @lines = split ( /\n/, $slurp ); my $i = 1; foreach my $line (@lines) { if ($line =~ /$CONFIG_re/) { push( @ret, [$i, $+{CONFIG_}] ); } $i++; } @ret; } exit main ( @ARGV ); sub main { my %configs; find( \&match, @_ ); foreach my $Kconfig (@Kconfigs) { my (@tmp) = parse_kconfig( $Kconfig ); foreach my $config ( @tmp ) { $configs{ $config }++; } } foreach my $shipped (glob("config-*")) { my (@tmp) = parse_shipped( $shipped ); foreach my $ref ( @tmp ) { say( STDERR "$shipped:$ref->[0]: No Kconfig symbol matches 'CONFIG_$ref->[1]'" ) unless (grep( /$ref->[1]/, keys( %configs ))); } } 0; }

2 3

[PATCH] Remove all references to unknown Kconfig symbols
by Paul Bolle 02 Oct '14

02 Oct '14

Reported-by: Paul Bolle <pebolle(a)tiscali.nl> --- 0) I do not have fedpkg installed so "make prep" failed. Neither did I test this any other way. As a consequence this is not Signed-off-by, but only Reported-by. I think that testing that nothing breaks is the real work here. I do hope it turns out not to be too much work. 1) I stumbled on kernel-arm64.patch. That was fun! Anyhow, if one applies this patch and runs the perl script I just sent, one should see: config-arm64:111: No Kconfig symbol matches 'CONFIG_PCI_XGENE' config-arm64:120: No Kconfig symbol matches 'CONFIG_SBSAUART_TTY' config-generic:5205: No Kconfig symbol matches 'CONFIG_SBSAUART_TTY' unless one is building for arm64. 2) Please note that this also takes into account Kconfig symbols added by patches currently in master. References to their macros were not removed! Makefile | 2 - Makefile.release | 2 - config-arm-generic | 8 --- config-arm64 | 3 - config-armv7 | 32 --------- config-armv7-generic | 12 ---- config-debug | 4 -- config-generic | 189 ------------------------------------------------- config-i686-PAE | 1 - config-nodebug | 4 -- config-powerpc-generic | 14 ---- config-powerpc64 | 11 --- config-powerpc64p7 | 12 ---- config-s390x | 15 ---- config-x86-32-generic | 16 ----- config-x86-generic | 7 -- config-x86_64-generic | 6 -- 17 files changed, 338 deletions(-) diff --git a/Makefile b/Makefile index 274ae2a8acf4..0cdc9beeb5ba 100644 --- a/Makefile +++ b/Makefile @@ -47,7 +47,6 @@ debug: @perl -pi -e 's/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/' config-nodebug @perl -pi -e 's/# CONFIG_DEBUG_SG is not set/CONFIG_DEBUG_SG=y/' config-nodebug @perl -pi -e 's/# CONFIG_DEBUG_PI_LIST is not set/CONFIG_DEBUG_PI_LIST=y/' config-nodebug - @perl -pi -e 's/# CONFIG_DEBUG_WRITECOUNT is not set/CONFIG_DEBUG_WRITECOUNT=y/' config-nodebug @perl -pi -e 's/# CONFIG_DEBUG_OBJECTS is not set/CONFIG_DEBUG_OBJECTS=y/' config-nodebug @perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_FREE is not set/CONFIG_DEBUG_OBJECTS_FREE=y/' config-nodebug @perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_TIMERS is not set/CONFIG_DEBUG_OBJECTS_TIMERS=y/' config-nodebug @@ -58,7 +57,6 @@ debug: @perl -pi -e 's/# CONFIG_EFI_PGT_DUMP is not set/CONFIG_EFI_PGT_DUMP=y/' config-nodebug @perl -pi -e 's/# CONFIG_CAN_DEBUG_DEVICES is not set/CONFIG_CAN_DEBUG_DEVICES=y/' config-nodebug @perl -pi -e 's/# CONFIG_MODULE_FORCE_UNLOAD is not set/CONFIG_MODULE_FORCE_UNLOAD=y/' config-nodebug - @perl -pi -e 's/# CONFIG_SYSCTL_SYSCALL_CHECK is not set/CONFIG_SYSCTL_SYSCALL_CHECK=y/' config-nodebug @perl -pi -e 's/# CONFIG_DEBUG_NOTIFIERS is not set/CONFIG_DEBUG_NOTIFIERS=y/' config-nodebug @perl -pi -e 's/# CONFIG_DMA_API_DEBUG is not set/CONFIG_DMA_API_DEBUG=y/' config-nodebug @perl -pi -e 's/# CONFIG_PM_TEST_SUSPEND is not set/CONFIG_PM_TEST_SUSPEND=y/' config-generic diff --git a/Makefile.release b/Makefile.release index 6c79d4ef3d70..6343073f9e4b 100644 --- a/Makefile.release +++ b/Makefile.release @@ -27,7 +27,6 @@ config-release: @perl -pi -e 's/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/' config-nodebug @perl -pi -e 's/CONFIG_DEBUG_SG=y/# CONFIG_DEBUG_SG is not set/' config-nodebug @perl -pi -e 's/CONFIG_DEBUG_PI_LIST=y/# CONFIG_DEBUG_PI_LIST is not set/' config-nodebug - @perl -pi -e 's/CONFIG_DEBUG_WRITECOUNT=y/# CONFIG_DEBUG_WRITECOUNT is not set/' config-nodebug @perl -pi -e 's/CONFIG_DEBUG_OBJECTS=y/# CONFIG_DEBUG_OBJECTS is not set/' config-nodebug @perl -pi -e 's/CONFIG_DEBUG_OBJECTS_FREE=y/# CONFIG_DEBUG_OBJECTS_FREE is not set/' config-nodebug @perl -pi -e 's/CONFIG_DEBUG_OBJECTS_TIMERS=y/# CONFIG_DEBUG_OBJECTS_TIMERS is not set/' config-nodebug @@ -38,7 +37,6 @@ config-release: @perl -pi -e 's/CONFIG_EFI_PGT_DUMP=y/# CONFIG_EFI_PGT_DUMP is not set/' config-nodebug @perl -pi -e 's/CONFIG_CAN_DEBUG_DEVICES=y/# CONFIG_CAN_DEBUG_DEVICES is not set/' config-nodebug @perl -pi -e 's/CONFIG_MODULE_FORCE_UNLOAD=y/# CONFIG_MODULE_FORCE_UNLOAD is not set/' config-nodebug - @perl -pi -e 's/CONFIG_SYSCTL_SYSCALL_CHECK=y/# CONFIG_SYSCTL_SYSCALL_CHECK is not set/' config-nodebug @perl -pi -e 's/CONFIG_DEBUG_NOTIFIERS=y/# CONFIG_DEBUG_NOTIFIERS is not set/' config-nodebug @perl -pi -e 's/CONFIG_DMA_API_DEBUG=y/# CONFIG_DMA_API_DEBUG is not set/' config-nodebug @perl -pi -e 's/CONFIG_PM_TEST_SUSPEND=y/# CONFIG_PM_TEST_SUSPEND is not set/' config-generic diff --git a/config-arm-generic b/config-arm-generic index 9ddb1f0ccec8..1f07efa9b2fc 100644 --- a/config-arm-generic +++ b/config-arm-generic @@ -79,15 +79,12 @@ CONFIG_GENERIC_CPUFREQ_CPU0=m # Device tree CONFIG_DTC=y CONFIG_DMA_OF=y -CONFIG_PROC_DEVICETREE=y CONFIG_OF=y CONFIG_OF_ADDRESS=y -CONFIG_OF_DEVICE=y CONFIG_OF_DYNAMIC=y CONFIG_OF_EARLY_FLATTREE=y CONFIG_OF_FLATTREE=y CONFIG_OF_GPIO=y -CONFIG_OF_I2C=m CONFIG_OF_IOMMU=y CONFIG_OF_IRQ=y CONFIG_OF_MDIO=m @@ -103,7 +100,6 @@ CONFIG_THERMAL_OF=y # External Connectors CONFIG_EXTCON=m -CONFIG_OF_EXTCON=m CONFIG_EXTCON_GPIO=m CONFIG_EXTCON_ADC_JACK=m # CONFIG_EXTCON_SM5502 is not set @@ -111,7 +107,6 @@ CONFIG_EXTCON_ADC_JACK=m # MTD CONFIG_MTD_BLKDEVS=m CONFIG_MTD_BLOCK=m -CONFIG_MTD_CHAR=m CONFIG_MTD_CFI=m CONFIG_MTD_CFI_INTELEXT=m CONFIG_MTD_CFI_AMDSTD=m @@ -184,10 +179,8 @@ CONFIG_CMA_AREAS=7 # CONFIG_I2C_RCAR is not set # CONFIG_DRM_SHMOBILE is not set # CONFIG_I2C_SH_MOBILE is not set -# CONFIG_MMC_DW_SOCFPGA is not set # CONFIG_I2C_NOMADIK is not set # CONFIG_IRQ_DOMAIN_DEBUG is not set -# CONFIG_LEDS_RENESAS_TPU is not set # CONFIG_LOCK_STAT is not set # CONFIG_DRM_ARMADA is not set @@ -232,7 +225,6 @@ CONFIG_CMA_AREAS=7 # CONFIG_NET_VENDOR_SUN is not set # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_NET_VENDOR_XIRCOM is not set -# CONFIG_NET_PCMCIA is not set # scsi diff --git a/config-arm64 b/config-arm64 index 3d6e2f2cb33b..0310d91c9fff 100644 --- a/config-arm64 +++ b/config-arm64 @@ -9,7 +9,6 @@ CONFIG_SCHED_SMT=y # arm64 only SoCs CONFIG_ARCH_XGENE=y -# CONFIG_ALWAYS_USE_PERSISTENT_CLOCK is not set # CONFIG_AMBA_PL08X is not set CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y CONFIG_ARCH_REQUIRE_GPIOLIB=y @@ -26,7 +25,6 @@ CONFIG_CMDLINE="console=ttyAMA0" # CONFIG_CMDLINE_FORCE is not set CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_GENERIC_ACL=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CSUM=y @@ -84,7 +82,6 @@ CONFIG_CRYPTO_DEV_CCP=y CONFIG_CRYPTO_DEV_CCP_DD=m CONFIG_CRYPTO_DEV_CCP_CRYPTO=m -CONFIG_I2C_ACPI=y # APM Xgene CONFIG_POWER_RESET_XGENE=y diff --git a/config-armv7 b/config-armv7 index ff5825a09a83..133a3106497a 100644 --- a/config-armv7 +++ b/config-armv7 @@ -22,7 +22,6 @@ CONFIG_ARCH_ZYNQ=y # CONFIG_VIRTUALIZATION is not set # mvebu -CONFIG_MACH_ARMADA_370_XP=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y CONFIG_MACH_ARMADA_38X=y @@ -49,7 +48,6 @@ CONFIG_MVNETA=m CONFIG_GPIO_MVEBU=y CONFIG_MVEBU_CLK_CORE=y CONFIG_MVEBU_CLK_COREDIV=y -CONFIG_MVEBU_CLK_GATING=y CONFIG_MMC_MVSDIO=m CONFIG_MMC_SDHCI_DOVE=m CONFIG_SPI_ORION=m @@ -80,15 +78,12 @@ CONFIG_SOC_TI81XX=y # CONFIG_MACH_CM_T3517 is not set # CONFIG_MACH_CRANEBOARD is not set # CONFIG_MACH_DEVKIT8000 is not set -# CONFIG_MACH_IGEP0030 is not set # CONFIG_MACH_NOKIA_RX51 is not set # CONFIG_MACH_OMAP_3430SDP is not set -# CONFIG_MACH_OMAP_3630SDP is not set # CONFIG_MACH_OMAP_LDP is not set # CONFIG_MACH_OMAP3_BEAGLE is not set # CONFIG_MACH_OMAP3517EVM is not set # CONFIG_MACH_OMAP3530_LV_SOM is not set -# CONFIG_MACH_OMAP3EVM is not set # CONFIG_MACH_OMAP3_PANDORA is not set # CONFIG_MACH_OMAP3_TORPEDO is not set # CONFIG_MACH_OVERO is not set @@ -102,12 +97,10 @@ CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX=y CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_32K_TIMER_HZ=128 CONFIG_OMAP_PACKAGE_CBB=y CONFIG_OMAP_PACKAGE_CUS=y # CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set -CONFIG_OMAP_MCBSP=y CONFIG_OMAP2PLUS_MBOX=m CONFIG_OMAP_MBOX_KFIFO_SIZE=256 CONFIG_OMAP_DM_TIMER=y @@ -137,7 +130,6 @@ CONFIG_TI_PIPE3=m CONFIG_PCI_DRA7XX=y CONFIG_TWL4030_USB=m CONFIG_TWL6030_USB=m -CONFIG_TWL6030_PWM=m CONFIG_TWL6040_CORE=y CONFIG_CLK_TWL6040=m CONFIG_OMAP_INTERCONNECT=m @@ -150,7 +142,6 @@ CONFIG_USB_EHCI_HCD_OMAP=m CONFIG_USB_OHCI_HCD_OMAP3=m CONFIG_USB_MUSB_AM35X=m CONFIG_USB_MUSB_OMAP2PLUS=m -CONFIG_OMAP_CONTROL_USB=m CONFIG_MMC_OMAP=m CONFIG_MMC_OMAP_HS=y CONFIG_RTC_DRV_MAX8907=m @@ -186,7 +177,6 @@ CONFIG_MTD_ONENAND_OMAP2=m CONFIG_MTD_NAND_OMAP2=m CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_SPI_OMAP24XX=m -CONFIG_MFD_TI_SSP=m CONFIG_SPI_TI_QSPI=m CONFIG_INPUT_TWL4030_PWRBUTTON=m @@ -194,10 +184,8 @@ CONFIG_INPUT_TWL4030_VIBRA=m CONFIG_INPUT_TWL6040_VIBRA=m CONFIG_KEYBOARD_OMAP4=m CONFIG_KEYBOARD_TWL4030=m -CONFIG_TOUCHSCREEN_TI_TSCADC=m # OMAP thermal temp. Can likely be built as module but doesn't autoload so build in to ensure performance on PandaES -CONFIG_OMAP_BANDGAP=y CONFIG_TI_SOC_THERMAL=y CONFIG_TI_THERMAL=y CONFIG_OMAP4_THERMAL=y @@ -224,13 +212,10 @@ CONFIG_HW_RANDOM_OMAP3_ROM=m CONFIG_DRM_OMAP=m CONFIG_DRM_OMAP_NUM_CRTCS=2 CONFIG_OMAP2_VRFB=y -# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set -# CONFIG_FB_OMAP_LCD_VGA is not set # CONFIG_FB_OMAP2 is not set # CONFIG_FB_DA8XX is not set CONFIG_OMAP2_DSS=m -# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set # CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set CONFIG_OMAP2_DSS_DPI=y CONFIG_OMAP2_DSS_RFBI=y @@ -238,9 +223,7 @@ CONFIG_OMAP2_DSS_VENC=y CONFIG_OMAP4_DSS_HDMI=y CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_DSI=y -# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 -CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET=y CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y CONFIG_DISPLAY_ENCODER_TFP410=m @@ -263,14 +246,9 @@ CONFIG_V4L_PLATFORM_DRIVERS=y # CONFIG_VIDEO_OMAP2_VOUT is not set CONFIG_VIDEO_OMAP3=m # CONFIG_VIDEO_OMAP4 is not set -# CONFIG_VIDEO_OMAP4_DEBUG is not set # The ones below are for TI Davinci -# CONFIG_VIDEO_VPFE_CAPTURE is not set -# CONFIG_VIDEO_VPSS_SYSTEM is not set # CONFIG_VIDEO_DM6446_CCDC is not set -# CONFIG_VIDEO_DM644X_VPBE is not set # CONFIG_VIDEO_DM355_CCDC is not set -# CONFIG_VIDEO_ISIF is not set # Also enable vivi driver - useful for testing a full kernelspace V4L2 driver CONFIG_V4L_TEST_DRIVERS=y CONFIG_VIDEO_VIVI=m @@ -280,18 +258,13 @@ CONFIG_SND_SOC_I2C_AND_SPI=m CONFIG_SND_OMAP_SOC_AM3517EVM=m CONFIG_SND_OMAP_SOC_DMIC=m CONFIG_SND_OMAP_SOC_HDMI=m -CONFIG_SND_OMAP_SOC_IGEP0020=m CONFIG_SND_OMAP_SOC_MCBSP=m CONFIG_SND_OMAP_SOC_MCPDM=m CONFIG_SND_OMAP_SOC_OMAP_HDMI=m CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m -CONFIG_SND_OMAP_SOC_OMAP3EVM=m -CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m -CONFIG_SND_OMAP_SOC_OVERO=m CONFIG_SND_OMAP_SOC_RX51=m -CONFIG_SND_OMAP_SOC_SDP4430=m CONFIG_SND_SOC_TLV320AIC23=m CONFIG_SND_SOC_TLV320AIC3X=m CONFIG_SND_SOC_TWL4030=m @@ -379,7 +352,6 @@ CONFIG_USB_EHCI_MSM=m # CONFIG_DRM_MSM_REGISTER_LOGGING is not set # i.MX -CONFIG_MXC_IRQ_PRIOR=y # CONFIG_MXC_DEBUG_BOARD is not set CONFIG_SOC_IMX50=y CONFIG_SOC_IMX51=y @@ -415,7 +387,6 @@ CONFIG_STMPE_I2C=y CONFIG_SPI_IMX=m CONFIG_SPI_FSL_QUADSPI=m CONFIG_STMPE_SPI=y -CONFIG_MFD_MC13783=m CONFIG_MFD_MC13XXX_SPI=m CONFIG_MFD_STMPE=y CONFIG_MTD_NAND_GPMI_NAND=m @@ -444,7 +415,6 @@ CONFIG_SND_SOC_IMX_WM8962=m CONFIG_SND_SOC_IMX_MC13783=m CONFIG_SND_SOC_IMX_SPDIF=m CONFIG_SND_SOC_EUKREA_TLV320=m -CONFIG_SND_SOC_TVL320AIC32X4=m CONFIG_SND_SOC_WM8731=m CONFIG_USB_IMX21_HCD=m @@ -505,7 +475,6 @@ CONFIG_REGULATOR_DA9055=m # picoxcell # CONFIG_CRYPTO_DEV_PICOXCELL is not set -# CONFIG_HW_RANDOM_PICOXCELL is not set # Exynos 4 CONFIG_ARCH_EXYNOS4=y @@ -594,7 +563,6 @@ CONFIG_MFD_TPS80031=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y -CONFIG_NVEC_LEDS=y CONFIG_NVEC_PAZ00=y CONFIG_MFD_TPS6586X=y CONFIG_GPIO_TPS6586X=y diff --git a/config-armv7-generic b/config-armv7-generic index 21da8d935c94..4a96a546a0cf 100644 --- a/config-armv7-generic +++ b/config-armv7-generic @@ -35,7 +35,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ALWAYS_USE_PERSISTENT_CLOCK=y CONFIG_IRQ_CROSSBAR=y # CONFIG_MCPM is not set @@ -304,8 +303,6 @@ CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_MMC_SDHCI_TEGRA=m CONFIG_TEGRA_WATCHDOG=m CONFIG_I2C_TEGRA=m -CONFIG_TEGRA_SYSTEM_DMA=y -CONFIG_TEGRA_EMC_SCALING_ENABLE=y CONFIG_TEGRA_AHB=y CONFIG_TEGRA20_APB_DMA=y CONFIG_SPI_TEGRA114=m @@ -368,7 +365,6 @@ CONFIG_AX88796_93CX6=y # usb gadget CONFIG_USB_OTG=y CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_MUSB_HDRC=m CONFIG_USB_GADGET_VBUS_DRAW=100 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 CONFIG_USB_MUSB_HDRC=m @@ -385,12 +381,10 @@ CONFIG_USB_CONFIGFS_NCM=y CONFIG_USB_CONFIGFS_OBEX=y # CONFIG_USB_CONFIGFS_RNDIS is not set CONFIG_USB_CONFIGFS_SERIAL=y -CONFIG_USB_CONFIGFS_STORAGE=y # CONFIG_USB_CONFIGFS_F_LB_SS is not set # CONFIG_USB_CONFIGFS_F_FS is not set # CONFIG_MUSB_PIO_ONLY is not set -# CONFIG_USB_MUSB_DEBUG is not set # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set # CONFIG_USB_GADGET_DEBUG_FS is not set @@ -439,7 +433,6 @@ CONFIG_PINCTRL=y CONFIG_PINCTRL_SINGLE=y CONFIG_GENERIC_PINCONF=y # CONFIG_PINCTRL_SAMSUNG is not set -# CONFIG_PINCTRL_CAPRI is not set # CONFIG_PINCTRL_MSM8X74 is not set # CONFIG_PINCTRL_BCM281XX is not set # CONFIG_PINCTRL_APQ8064 is not set @@ -510,7 +503,6 @@ CONFIG_EDAC_MM_EDAC=m CONFIG_EDAC_LEGACY_SYSFS=y # Watchdog -CONFIG_MPCORE_WATCHDOG=m # Thermal / powersaving CONFIG_THERMAL=y @@ -585,7 +577,6 @@ CONFIG_SND_DMAENGINE_PCM=m CONFIG_SND_JACK=y CONFIG_SND_SIMPLE_CARD=m CONFIG_SND_SOC_ALL_CODECS=m -CONFIG_SND_SOC_CACHE_LZO=y CONFIG_SND_SOC_DMIC=m CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y CONFIG_SND_SOC_HDMI_CODEC=m @@ -664,7 +655,6 @@ CONFIG_RTC_DRV_TPS80031=m # Regulators CONFIG_REGULATOR=y CONFIG_RFKILL_REGULATOR=m -CONFIG_REGULATOR_DUMMY=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=m CONFIG_REGULATOR_USERSPACE_CONSUMER=m @@ -784,7 +774,6 @@ CONFIG_UBIFS_FS=m CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y -# CONFIG_UBIFS_FS_DEBUG is not set # Sensors CONFIG_SENSORS_HTU21=m @@ -843,7 +832,6 @@ CONFIG_BPF_JIT=y # CONFIG_PINCTRL_IMX35 is not set # CONFIG_DVB_USB_PCTV452E is not set # CONFIG_DWMAC_SOCFPGA is not set -# CONFIG_MMC_DW_SOCFPGA is not set # CONFIG_MFD_LP8788 is not set # CONFIG_MFD_MAX77693 is not set diff --git a/config-debug b/config-debug index d866d8013f34..467f33a1997c 100644 --- a/config-debug +++ b/config-debug @@ -31,14 +31,12 @@ CONFIG_LOCK_STAT=y CONFIG_DEBUG_STACK_USAGE=y CONFIG_ACPI_DEBUG=y -# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set CONFIG_DEBUG_SG=y CONFIG_DEBUG_PI_LIST=y # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUG_WRITECOUNT=y CONFIG_DEBUG_OBJECTS=y # CONFIG_DEBUG_OBJECTS_SELFTEST is not set CONFIG_DEBUG_OBJECTS_FREE=y @@ -53,7 +51,6 @@ CONFIG_CAN_DEBUG_DEVICES=y CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_DEBUG_NOTIFIERS=y @@ -97,7 +94,6 @@ CONFIG_PM_ADVANCED_DEBUG=y CONFIG_CEPH_LIB_PRETTYDEBUG=y CONFIG_QUOTA_DEBUG=y -CONFIG_PCI_DEFAULT_USE_CRS=y CONFIG_KGDB_KDB=y CONFIG_KDB_KEYBOARD=y diff --git a/config-generic b/config-generic index df445fa9ebc3..ab611ccdd88f 100644 --- a/config-generic +++ b/config-generic @@ -64,7 +64,6 @@ CONFIG_UTS_NS=y CONFIG_IPC_NS=y CONFIG_NET_NS=y CONFIG_USER_NS=y -# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set CONFIG_POSIX_MQUEUE=y # CONFIG_PREEMPT_NONE is not set @@ -77,8 +76,6 @@ CONFIG_SLUB_CPU_PARTIAL=y # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_AD525X_DPOT is not set -# CONFIG_ATMEL_PWM is not set -# CONFIG_IWMC3200TOP is not set # # Loadable module support @@ -106,7 +103,6 @@ CONFIG_PCIEASPM=y CONFIG_PCIE_ECRC=y CONFIG_PCIEAER_INJECT=m CONFIG_HOTPLUG_PCI_PCIE=y -CONFIG_HOTPLUG_PCI_FAKE=m # CONFIG_SGI_IOC4 is not set @@ -131,7 +127,6 @@ CONFIG_SDIO_UART=m # CONFIG_MMC_TEST is not set # CONFIG_MMC_DEBUG is not set # https://lists.fedoraproject.org/pipermail/kernel/2014-February/004889.html -CONFIG_MMC_UNSAFE_RESUME=y # CONFIG_MMC_CLKGATE is not set CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=8 @@ -171,7 +166,6 @@ CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_SRPT=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m -# CONFIG_INFINIBAND_EXPERIMENTAL_UVERBS_FLOW_STEERING is not set #staging CONFIG_INFINIBAND_IPATH=m CONFIG_INFINIBAND_ISER=m CONFIG_INFINIBAND_ISERT=m @@ -253,7 +247,6 @@ CONFIG_MTD=m # # User Modules And Translation Layers # -# CONFIG_MTD_CHAR is not set # CONFIG_MTD_BLKDEVS is not set # CONFIG_MTD_BLOCK is not set # CONFIG_MTD_BLOCK_RO is not set @@ -309,9 +302,7 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOCG3 is not set # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set -# CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_BCH is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_LPDDR is not set CONFIG_MTD_UBI=m @@ -394,7 +385,6 @@ CONFIG_VIRTIO_NET=m CONFIG_HW_RANDOM_VIRTIO=m CONFIG_VIRTIO_CONSOLE=m CONFIG_VHOST_NET=m -CONFIG_TCM_VHOST=m CONFIG_VHOST_SCSI=m # @@ -407,7 +397,6 @@ CONFIG_SCSI_PROC_FS=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_SRP=m CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_TGT=m CONFIG_SCSI_ISCI=m CONFIG_SCSI_CHELSIO_FCOE=m @@ -431,15 +420,12 @@ CONFIG_CHR_DEV_SCH=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_FC_TGT_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=m CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y @@ -458,7 +444,6 @@ CONFIG_SCSI_ACARD=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m # http://lists.fedoraproject.org/pipermail/kernel/2013-February/004102.html -# CONFIG_SCSI_AIC7XXX_OLD is not set CONFIG_AIC7XXX_CMDS_PER_DEVICE=4 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set @@ -657,10 +642,8 @@ CONFIG_MD_RAID456=m CONFIG_BCACHE=m # CONFIG_BCACHE_DEBUG is not set -# CONFIG_BCACHE_EDEBUG is not set # CONFIG_BCACHE_CLOSURES_DEBUG is not set -# CONFIG_MULTICORE_RAID456 is not set CONFIG_ASYNC_RAID6_TEST=m CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=m @@ -675,7 +658,6 @@ CONFIG_DM_CACHE_MQ=m CONFIG_DM_CACHE_CLEANER=m # CONFIG_DM_ERA is not set # CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set -# CONFIG_DM_DEBUG_SPACE_MAPS is not set CONFIG_DM_UEVENT=y CONFIG_DM_ZERO=y CONFIG_DM_LOG_USERSPACE=m @@ -705,10 +687,8 @@ CONFIG_FIREWIRE=m CONFIG_FIREWIRE_OHCI=m CONFIG_FIREWIRE_SBP2=m CONFIG_FIREWIRE_NET=m -CONFIG_FIREWIRE_OHCI_DEBUG=y CONFIG_FIREWIRE_NOSY=m # CONFIG_FIREWIRE_SERIAL is not set -# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set # # I2O device support @@ -776,7 +756,6 @@ CONFIG_IP_MROUTE=y CONFIG_IP_MROUTE_MULTIPLE_TABLES=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y CONFIG_SYN_COOKIES=y CONFIG_NET_IPVTI=m CONFIG_INET_AH=m @@ -784,7 +763,6 @@ CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # @@ -819,7 +797,6 @@ CONFIG_IP_VS_FTP=m CONFIG_IP_VS_PE_SIP=m CONFIG_IPV6=y -CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y CONFIG_IPV6_OPTIMISTIC_DAD=y @@ -864,7 +841,6 @@ CONFIG_NETFILTER_NETLINK_ACCT=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_QUEUE_CT=y CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NETFILTER_TPROXY=m CONFIG_NETFILTER_XTABLES=y CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_MARK=m @@ -992,8 +968,6 @@ CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_SYNPROXY=m CONFIG_IP_NF_TARGET_TTL=m @@ -1003,7 +977,6 @@ CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_IPTABLES=y @@ -1024,10 +997,8 @@ CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_RAW=m CONFIG_IP6_NF_SECURITY=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_TARGET_SYNPROXY=m CONFIG_IP6_NF_TARGET_HL=m @@ -1085,7 +1056,6 @@ CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_STP=m CONFIG_BRIDGE_EBT_T_FILTER=m CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_ULOG=m CONFIG_BRIDGE_EBT_VLAN=m CONFIG_NFT_BRIDGE_META=m CONFIG_NFT_BRIDGE_REJECT=m @@ -1124,7 +1094,6 @@ CONFIG_IP_SET_LIST_SET=m # CONFIG_IP_SCTP=m CONFIG_NET_SCTPPROBE=m -# CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set @@ -1143,11 +1112,8 @@ CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_ECONET is not set -CONFIG_WAN_ROUTER=m CONFIG_IP_DCCP=m CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set @@ -1162,8 +1128,6 @@ CONFIG_IP_DCCP_CCID3=y CONFIG_TIPC=m CONFIG_TIPC_PORTS=8192 # CONFIG_TIPC_MEDIA_IB is not set -# CONFIG_TIPC_ADVANCED is not set -# CONFIG_TIPC_DEBUG is not set CONFIG_NETLABEL=y @@ -1396,7 +1360,6 @@ CONFIG_TULIP=m # CONFIG_TULIP_NAPI is not set # CONFIG_TULIP_MWI is not set CONFIG_TULIP_MMIO=y -# CONFIG_NI5010 is not set CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m @@ -1404,8 +1367,6 @@ CONFIG_PCMCIA_XIRCOM=m CONFIG_ULI526X=m CONFIG_NET_VENDOR_DLINK=y -CONFIG_DE600=m -CONFIG_DE620=m CONFIG_DL2K=m CONFIG_SUNDANCE=m # CONFIG_SUNDANCE_MMIO is not set @@ -1437,7 +1398,6 @@ CONFIG_IXGBE=m CONFIG_IXGBE_DCA=y CONFIG_IXGBE_DCB=y CONFIG_IXGBE_HWMON=y -CONFIG_IXGBE_PTP=y CONFIG_I40E=m # CONFIG_I40E_VXLAN is not set # CONFIG_I40E_DCB is not set @@ -1472,7 +1432,6 @@ CONFIG_NS83820=m CONFIG_NET_VENDOR_8390=y CONFIG_PCMCIA_AXNET=m CONFIG_NE2K_PCI=m -CONFIG_NE3210=m CONFIG_PCMCIA_PCNET=m CONFIG_NET_VENDOR_NVIDIA=y @@ -1480,7 +1439,6 @@ CONFIG_FORCEDETH=m CONFIG_NET_VENDOR_OKI=y # CONFIG_PCH_GBE is not set -# CONFIG_PCH_PTP is not set CONFIG_NET_PACKET_ENGINE=y CONFIG_HAMACHI=m @@ -1521,7 +1479,6 @@ CONFIG_NET_VENDOR_SIS=y CONFIG_SIS900=m CONFIG_SIS190=m -CONFIG_NET_VENDOR_SMC=y CONFIG_NET_VENDOR_SMSC=y CONFIG_PCMCIA_SMC91C92=m @@ -1534,8 +1491,6 @@ CONFIG_STMMAC_ETH=m # CONFIG_STMMAC_PLATFORM is not set # CONFIG_STMMAC_PCI is not set # CONFIG_STMMAC_DA is not set -# CONFIG_STMMAC_DUAL_MAC is not set -# CONFIG_STMMAC_TIMER is not set # CONFIG_STMMAC_DEBUG_FS is not set CONFIG_NET_VENDOR_SUN=y @@ -1596,9 +1551,6 @@ CONFIG_TYPHOON=m CONFIG_DNET=m -CONFIG_LNE390=m -CONFIG_ES3210=m -CONFIG_NET_PCI=y CONFIG_B44=m CONFIG_B44_PCI=y CONFIG_BCMGENET=m @@ -1607,7 +1559,6 @@ CONFIG_BNX2X=m CONFIG_BNX2X_SRIOV=y CONFIG_CNIC=m CONFIG_FEALNX=m -CONFIG_NET_POCKET=y CONFIG_ETHOC=m # @@ -1662,7 +1613,6 @@ CONFIG_CFG80211_DEFAULT_PS=y CONFIG_NL80211=y # CONFIG_NL80211_TESTMODE is not set CONFIG_WIRELESS_EXT=y -# CONFIG_WIRELESS_EXT_SYSFS is not set CONFIG_LIB80211=m CONFIG_LIB80211_CRYPT_WEP=m CONFIG_LIB80211_CRYPT_CCMP=m @@ -1671,7 +1621,6 @@ CONFIG_LIB80211_CRYPT_TKIP=m CONFIG_MAC80211=m CONFIG_MAC80211_RC_MINSTREL=y -# CONFIG_MAC80211_RC_DEFAULT_PID is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_RC_DEFAULT="minstrel" CONFIG_MAC80211_MESH=y @@ -1697,12 +1646,10 @@ CONFIG_ATH9K=m CONFIG_ATH9K_PCI=y CONFIG_ATH9K_AHB=y # CONFIG_ATH9K_DEBUG is not set -# CONFIG_ATH9K_MAC_DEBUG is not set CONFIG_ATH9K_DEBUGFS=y CONFIG_ATH9K_HTC=m CONFIG_ATH9K_BTCOEX_SUPPORT=y # CONFIG_ATH9K_HTC_DEBUGFS is not set -# CONFIG_ATH9K_LEGACY_RATE_CONTROL is not set # CONFIG_ATH9K_STATION_STATISTICS is not set # CONFIG_ATH9K_WOW is not set # @@ -1728,14 +1675,12 @@ CONFIG_B43=m CONFIG_B43_PCMCIA=y CONFIG_B43_SDIO=y CONFIG_B43_BCMA=y -# CONFIG_B43_BCMA_EXTRA is not set CONFIG_B43_BCMA_PIO=y # CONFIG_B43_DEBUG is not set CONFIG_B43_PHY_LP=y CONFIG_B43_PHY_N=y CONFIG_B43_PHY_HT=y # CONFIG_B43_PHY_G is not set -# CONFIG_B43_FORCE_PIO is not set CONFIG_B43LEGACY=m # CONFIG_B43LEGACY_DEBUG is not set CONFIG_B43LEGACY_DMA=y @@ -1746,11 +1691,9 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y CONFIG_BRCMSMAC=m CONFIG_BRCMFMAC=m CONFIG_BRCMFMAC_SDIO=y -CONFIG_BRCMFMAC_SDIO_OOB=y CONFIG_BRCMFMAC_USB=y CONFIG_BRCMFMAC_PCIE=y # CONFIG_BRCM_TRACING is not set -# CONFIG_BRCMISCAN is not set # CONFIG_BRCMDBG is not set # CONFIG_SYSTEMPORT is not set CONFIG_HERMES=m @@ -1786,14 +1729,9 @@ CONFIG_IWLMVM=m # CONFIG_IWLWIFI_BCAST_FILTERING is not set CONFIG_IWLWIFI_DEBUG=y CONFIG_IWLWIFI_DEBUGFS=y -CONFIG_IWLWIFI_DEVICE_SVTOOL=y -# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set -CONFIG_IWLWIFI_UCODE16=y -# CONFIG_IWLWIFI_P2P is not set CONFIG_IWLEGACY=m CONFIG_IWLEGACY_DEBUG=y CONFIG_IWLEGACY_DEBUGFS=y -# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING is not set CONFIG_IWL4965=y CONFIG_IWL3945=m # CONFIG_IWM is not set @@ -1843,8 +1781,6 @@ CONFIG_ZD1211RW=m # CONFIG_ZD1211RW_DEBUG is not set CONFIG_WL12XX=m -CONFIG_WL12XX_SPI=m -CONFIG_WL12XX_SDIO=m CONFIG_WL1251=m CONFIG_WL1251_SPI=m @@ -1894,7 +1830,6 @@ CONFIG_NET_FC=y # # PCMCIA network device support # -CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m CONFIG_PCMCIA_FMVJ18X=m @@ -1927,7 +1862,6 @@ CONFIG_NFC_DIGITAL=m CONFIG_NFC_NCI=m CONFIG_NFC_HCI=m CONFIG_NFC_SHDLC=y -CONFIG_NFC_LLCP=y CONFIG_NFC_SIM=m CONFIG_NFC_MRVL=m @@ -1989,7 +1923,6 @@ CONFIG_WINBOND_FIR=m # CONFIG_BT=m CONFIG_BT_6LOWPAN=m -CONFIG_BT_L2CAP=y CONFIG_BT_SCO=y CONFIG_BT_CMTP=m CONFIG_BT_RFCOMM=m @@ -2113,7 +2046,6 @@ CONFIG_HYSDN_CAPI=y # CONFIG_ISDN_CAPI=m # CONFIG_CAPI_TRACE is not set -CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPI20=m @@ -2173,7 +2105,6 @@ CONFIG_TABLET_USB_AIPTEK=m CONFIG_TABLET_USB_GTCO=m CONFIG_TABLET_USB_HANWANG=m CONFIG_TABLET_USB_KBTAB=m -CONFIG_TABLET_USB_WACOM=m CONFIG_TABLET_SERIAL_WACOM4=m CONFIG_INPUT_POWERMATE=m @@ -2366,7 +2297,6 @@ CONFIG_SYNCLINK_GT=m CONFIG_N_HDLC=m CONFIG_N_GSM=m # CONFIG_TRACE_SINK is not set -# CONFIG_STALDRV is not set # CONFIG_DUMMY_IRQ is not set # CONFIG_IBM_ASM is not set CONFIG_TIFM_CORE=m @@ -2475,7 +2405,6 @@ CONFIG_I2C_ALGOPCA=m # CONFIG_I2C_I801 is not set # CONFIG_I2C_ISCH is not set # CONFIG_I2C_NFORCE2_S4985 is not set -# CONFIG_I2C_INTEL_MID is not set # CONFIG_I2C_EG20T is not set # CONFIG_I2C_CBUS_GPIO is not set CONFIG_I2C_VIPERBOARD=m @@ -2683,7 +2612,6 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 CONFIG_IIO_INTERRUPT_TRIGGER=m CONFIG_HID_SENSOR_IIO_COMMON=m CONFIG_HID_SENSOR_IIO_TRIGGER=m -CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS=y # CONFIG_IIO_SYSFS_TRIGGER is not set # CONFIG_AD5446 is not set # CONFIG_AD5380 is not set @@ -2901,7 +2829,6 @@ CONFIG_WM8350_WATCHDOG=m CONFIG_WM831X_WATCHDOG=m # CONFIG_MAX63XX_WATCHDOG is not set # CONFIG_DW_WATCHDOG is not set -CONFIG_W83697UG_WDT=m # CONFIG_MEN_A21_WDT is not set # CONFIG_GPIO_WATCHDOG is not set # CONFIG_XILINX_WATCHDOG is not set @@ -3007,7 +2934,6 @@ CONFIG_AGP_EFFICEON=y CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 -# CONFIG_STUB_POULSBO is not set CONFIG_DRM=m CONFIG_DRM_LOAD_EDID_FIRMWARE=y @@ -3016,7 +2942,6 @@ CONFIG_DRM_CIRRUS_QEMU=m # do not enable on f17 or older # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set CONFIG_DRM_RADEON=m -CONFIG_DRM_RADEON_KMS=y # CONFIG_DRM_RADEON_UMS is not set # CONFIG_DRM_I810 is not set # CONFIG_DRM_MGA is not set @@ -3027,14 +2952,11 @@ CONFIG_DRM_I915=m CONFIG_DRM_I915_KMS=y CONFIG_DRM_I915_FBDEV=y # CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set -# CONFIG_DRM_I915_UMS is not set CONFIG_DRM_VIA=m CONFIG_DRM_NOUVEAU=m CONFIG_NOUVEAU_DEBUG=5 CONFIG_NOUVEAU_DEBUG_DEFAULT=3 CONFIG_DRM_NOUVEAU_BACKLIGHT=y -CONFIG_DRM_NOUVEAU_DEBUG=y -# CONFIG_DRM_PSB is not set CONFIG_DRM_I2C_CH7006=m CONFIG_DRM_I2C_SIL164=m CONFIG_DRM_I2C_NXP_TDA998X=m @@ -3073,7 +2995,6 @@ CONFIG_MEDIA_CONTROLLER=y # CONFIG_MEDIA_SDR_SUPPORT is not set CONFIG_VIDEO_DEV=m # CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_VIDEO_V4L2=y # CONFIG_VIDEO_V4L2_INT_DEVICE is not set CONFIG_VIDEO_V4L2_SUBDEV_API=y @@ -3090,13 +3011,9 @@ CONFIG_VIDEO_V4L2_SUBDEV_API=y # # Video Adapters # -CONFIG_V4L_USB_DRIVERS=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -CONFIG_V4L_PCI_DRIVERS=y CONFIG_VIDEO_AU0828=m CONFIG_VIDEO_AU0828_V4L2=y CONFIG_VIDEO_BT848=m -CONFIG_VIDEO_BT848_DVB=y CONFIG_VIDEO_BWQCAM=m CONFIG_VIDEO_SR030PC30=m CONFIG_VIDEO_NOON010PC30=m @@ -3180,14 +3097,11 @@ CONFIG_MEDIA_ATTACH=y # # V4L/DVB tuners -# Selected automatically by not setting CONFIG_MEDIA_TUNER_CUSTOMISE # -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set # # Digital Video Broadcasting Devices # -CONFIG_DVB_CAPTURE_DRIVERS=y CONFIG_DVB_CORE=m CONFIG_DVB_NET=y CONFIG_DVB_MAX_ADAPTERS=8 @@ -3195,9 +3109,7 @@ CONFIG_DVB_DYNAMIC_MINORS=y # # DVB frontends -# Selected automatically by not setting CONFIG_DVB_FE_CUSTOMISE # -# CONFIG_DVB_FE_CUSTOMISE is not set # # Supported DVB bridge Modules @@ -3219,7 +3131,6 @@ CONFIG_DVB_USB_DW2102=m CONFIG_DVB_USB_FRIIO=m CONFIG_DVB_USB_EC168=m CONFIG_DVB_USB_PCTV452E=m -CONFIG_DVB_USB_IT913X=m CONFIG_DVB_USB_MXL111SF=m CONFIG_DVB_DM1105=m CONFIG_DVB_FIREDTV=m @@ -3300,7 +3211,6 @@ CONFIG_IR_RC5_DECODER=m CONFIG_IR_RC6_DECODER=m CONFIG_IR_JVC_DECODER=m CONFIG_IR_SONY_DECODER=m -CONFIG_IR_RC5_SZ_DECODER=m CONFIG_IR_SANYO_DECODER=m CONFIG_IR_SHARP_DECODER=m CONFIG_IR_MCE_KBD_DECODER=m @@ -3331,14 +3241,11 @@ CONFIG_V4L_MEM2MEM_DRIVERS=y # # Broadcom Crystal HD video decoder driver # -CONFIG_CRYSTALHD=m # # Graphics support # -CONFIG_DISPLAY_SUPPORT=m -CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FB_FOREIGN_ENDIAN is not set @@ -3522,7 +3429,6 @@ CONFIG_SND_HDA_INPUT_JACK=y CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_CODEC_REALTEK=y -CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y @@ -3609,7 +3515,6 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_DEBUG is not set # DEPRECATED: See bug 362221. Fix udev. -# CONFIG_USB_DEVICE_CLASS is not set # @@ -3617,11 +3522,9 @@ CONFIG_USB_SUPPORT=y # # Deprecated. -# CONFIG_USB_DEVICEFS is not set CONFIG_USB_DEFAULT_PERSIST=y # CONFIG_USB_DYNAMIC_MINORS is not set -CONFIG_USB_SUSPEND=y # # USB Host Controller Drivers @@ -3648,7 +3551,6 @@ CONFIG_USB_SL811_HCD_ISO=y # CONFIG_USB_SL811_CS is not set # CONFIG_USB_R8A66597_HCD is not set CONFIG_USB_XHCI_HCD=y -# CONFIG_USB_XHCI_HCD_DEBUGGING is not set # CONFIG_USB_MAX3421_HCD is not set # @@ -3676,7 +3578,6 @@ CONFIG_USB_STORAGE_KARMA=m CONFIG_USB_STORAGE_REALTEK=m CONFIG_REALTEK_AUTOPM=y CONFIG_USB_STORAGE_ENE_UB6250=m -# CONFIG_USB_LIBUSUAL is not set CONFIG_USB_UAS=m @@ -3685,7 +3586,6 @@ CONFIG_USB_UAS=m # CONFIG_USB_HID=y -CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_I2C_HID=m @@ -3696,12 +3596,10 @@ CONFIG_UHID=m CONFIG_HID_PID=y CONFIG_LOGITECH_FF=y CONFIG_HID_LOGITECH_DJ=m -CONFIG_LOGIWII_FF=y CONFIG_LOGIRUMBLEPAD2_FF=y CONFIG_PANTHERLORD_FF=y CONFIG_THRUSTMASTER_FF=y CONFIG_HID_WACOM=m -CONFIG_HID_WACOM_POWER_SUPPLY=y CONFIG_ZEROPLUS_FF=y CONFIG_USB_HIDDEV=y CONFIG_USB_IDMOUSE=m @@ -3713,9 +3611,7 @@ CONFIG_LOGIWHEELS_FF=y CONFIG_HID_MAGICMOUSE=y CONFIG_HID_MULTITOUCH=m CONFIG_HID_NTRIG=y -CONFIG_HID_QUANTA=y CONFIG_HID_PRIMAX=m -CONFIG_HID_PS3REMOTE=m CONFIG_HID_PRODIKEYS=m CONFIG_HID_DRAGONRISE=m CONFIG_HID_GYRATION=m @@ -3727,7 +3623,6 @@ CONFIG_HID_PETALYNX=m CONFIG_HID_PICOLCD=m CONFIG_HID_RMI=m CONFIG_HID_ROCCAT=m -CONFIG_HID_ROCCAT_KONE=m CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_SONY_FF=y @@ -3752,23 +3647,16 @@ CONFIG_HID_ELECOM=m CONFIG_HID_ELO=m CONFIG_HID_UCLOGIC=m CONFIG_HID_WALTOP=m -CONFIG_HID_ROCCAT_PYRA=m -CONFIG_HID_ROCCAT_KONEPLUS=m CONFIG_HID_ACRUX=m CONFIG_HID_ACRUX_FF=y CONFIG_HID_KEYTOUCH=m CONFIG_HID_LCPOWER=m -CONFIG_HID_LENOVO_TPKBD=m -CONFIG_HID_ROCCAT_ARVO=m -CONFIG_HID_ROCCAT_ISKU=m -CONFIG_HID_ROCCAT_KOVAPLUS=m CONFIG_HID_HOLTEK=m CONFIG_HOLTEK_FF=y CONFIG_HID_HUION=m CONFIG_HID_GT683R=m CONFIG_HID_SPEEDLINK=m CONFIG_HID_WIIMOTE=m -CONFIG_HID_WIIMOTE_EXT=y CONFIG_HID_KYE=m CONFIG_HID_SAITEK=m CONFIG_HID_TIVO=m @@ -3790,7 +3678,6 @@ CONFIG_USB_MICROTEK=m # CONFIG_USB_DSBR=m -# CONFIG_USB_ET61X251 is not set CONFIG_USB_M5602=m CONFIG_USB_STV06XX=m CONFIG_USB_GSPCA=m @@ -3844,7 +3731,6 @@ CONFIG_USB_GSPCA_SE401=m CONFIG_USB_S2255=m # CONFIG_VIDEO_SH_MOBILE_CEU is not set # CONFIG_VIDEO_SH_MOBILE_CSI2 is not set -# CONFIG_USB_SN9C102 is not set CONFIG_USB_ZR364XX=m # CONFIG_SOC_CAMERA is not set @@ -3925,9 +3811,7 @@ CONFIG_USB_SERIAL_EDGEPORT_TI=m CONFIG_USB_SERIAL_EMPEG=m # CONFIG_USB_SERIAL_F81232 is not set CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_FUNSOFT=m CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_HP4X=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IPW=m CONFIG_USB_SERIAL_IR=m @@ -3952,11 +3836,9 @@ CONFIG_USB_SERIAL_MCT_U232=m # CONFIG_USB_SERIAL_METRO is not set CONFIG_USB_SERIAL_MOS7720=m CONFIG_USB_SERIAL_MOS7715_PARPORT=y -# CONFIG_USB_SERIAL_ZIO is not set # CONFIG_USB_SERIAL_WISHBONE is not set # CONFIG_USB_SERIAL_ZTE is not set CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MOTOROLA=m # CONFIG_USB_SERIAL_MXUPORT is not set CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_OPTION=m @@ -3964,24 +3846,19 @@ CONFIG_USB_SERIAL_OTI6858=m CONFIG_USB_SERIAL_OPTICON=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_QUATECH2 is not set CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_SIEMENS_MPI=m CONFIG_USB_SERIAL_SPCP8X5=m CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_QCAUX=m -CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m CONFIG_USB_SERIAL_XSENS_MT=m CONFIG_USB_SERIAL_DEBUG=m CONFIG_USB_SERIAL_SSU100=m CONFIG_USB_SERIAL_QT2=m -CONFIG_USB_SERIAL_FLASHLOADER=m -CONFIG_USB_SERIAL_SUUNTO=m CONFIG_USB_SERIAL_CONSOLE=y CONFIG_USB_EZUSB=y @@ -4020,8 +3897,6 @@ CONFIG_USB_CXACRU=m # CONFIG_USB_CYTHERM is not set CONFIG_USB_EMI26=m CONFIG_USB_FTDI_ELAN=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set # CONFIG_USB_GADGET is not set # CONFIG_USB_DWC3 is not set # CONFIG_USB_GADGETFS is not set @@ -4084,7 +3959,6 @@ CONFIG_PCF50633_GPIO=m CONFIG_INPUT_PCF50633_PMU=m CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -CONFIG_MFD_SUPPORT=y CONFIG_MFD_VX855=m CONFIG_MFD_SM501=m CONFIG_MFD_SM501_GPIO=y @@ -4153,7 +4027,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_EXT3_FS is not set CONFIG_EXT4_FS=y CONFIG_EXT4_USE_FOR_EXT23=y -CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y CONFIG_JBD2=y @@ -4362,9 +4235,7 @@ CONFIG_GFS2_FS_LOCKING_DLM=y CONFIG_UBIFS_FS=m -CONFIG_UBIFS_FS_XATTR=y # CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -# CONFIG_UBIFS_FS_DEBUG is not set # # Partition Types @@ -4525,7 +4396,6 @@ CONFIG_EARLY_PRINTK_DBGP=y # CONFIG_CRASH_DUMP is not set # CONFIG_CRASH is not set # CONFIG_GCOV_KERNEL is not set -# CONFIG_RAMOOPS is not set CONFIG_KGDB=y CONFIG_KGDB_SERIAL_CONSOLE=y @@ -4558,12 +4428,10 @@ CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y # http://lists.fedoraproject.org/pipermail/kernel/2013-February/004125.html -CONFIG_AUDIT_LOGINUID_IMMUTABLE=y CONFIG_SECCOMP=y CONFIG_STRICT_DEVMEM=y -# CONFIG_SSBI is not set # # Cryptographic options @@ -4677,7 +4545,6 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=m # CONFIG_BACKLIGHT_GENERIC is not set -CONFIG_BACKLIGHT_PROGEAR=m # CONFIG_BACKLIGHT_ADP8860 is not set # CONFIG_BACKLIGHT_ADP8870 is not set # CONFIG_BACKLIGHT_LM3630 is not set @@ -4794,15 +4661,10 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=m CONFIG_CPU_FREQ_STAT_DETAILS=y -# CONFIG_IBMTR is not set -# CONFIG_SKISA is not set -# CONFIG_PROTEON is not set -# CONFIG_SMCTR is not set # CONFIG_MOUSE_ATIXL is not set @@ -4845,15 +4707,12 @@ CONFIG_MIGRATION=y CONFIG_BOUNCE=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y -# CONFIG_LEDS_AMS_DELTA is not set # CONFIG_LEDS_LOCOMO is not set # CONFIG_LEDS_NET48XX is not set -# CONFIG_LEDS_NET5501 is not set # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_S3C24XX is not set -# CONFIG_LEDS_PCA9633 is not set CONFIG_LEDS_DELL_NETBOOKS=m # CONFIG_LEDS_TCA6507 is not set # CONFIG_LEDS_LM355x is not set @@ -4861,7 +4720,6 @@ CONFIG_LEDS_DELL_NETBOOKS=m # CONFIG_LEDS_PWM is not set # CONFIG_LEDS_LP8501 is not set # CONFIG_LEDS_PCA963X is not set -# CONFIG_LEDS_PCA9685 is not set CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_ONESHOT=m @@ -4872,12 +4730,10 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m CONFIG_LEDS_TRIGGER_TRANSIENT=m CONFIG_LEDS_TRIGGER_CAMERA=m -CONFIG_LEDS_ALIX2=m CONFIG_LEDS_CLEVO_MAIL=m CONFIG_LEDS_INTEL_SS4200=m CONFIG_LEDS_LM3530=m # CONFIG_LEDS_LM3642 is not set -CONFIG_LEDS_LM3556=m CONFIG_LEDS_BLINKM=m CONFIG_LEDS_LP3944=m CONFIG_LEDS_LP5521=m @@ -4939,7 +4795,6 @@ CONFIG_NO_HZ=y CONFIG_TIMER_STATS=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PERF_EVENTS=y -CONFIG_PERF_COUNTERS=y # Auxillary displays CONFIG_KS0108=m @@ -4962,7 +4817,6 @@ CONFIG_APM_POWER=m # CONFIG_BATTERY_DS2781 is not set # CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_SBS is not set -# CONFIG_BATTERY_BQ20Z75 is not set # CONFIG_BATTERY_DS2780 is not set # CONFIG_BATTERY_BQ27x00 is not set # CONFIG_BATTERY_MAX17040 is not set @@ -5010,7 +4864,6 @@ CONFIG_LIRC_SERIAL=m CONFIG_LIRC_SERIAL_TRANSMITTER=y CONFIG_LIRC_SASEM=m CONFIG_LIRC_SIR=m -CONFIG_LIRC_TTUSBIR=m # CONFIG_SAMPLES is not set @@ -5097,31 +4950,21 @@ CONFIG_STAGING_MEDIA=y # CONFIG_DVB_AS102 is not set # CONFIG_ET131X is not set # CONFIG_SLICOSS is not set -# CONFIG_WLAGS49_H2 is not set -# CONFIG_WLAGS49_H25 is not set # CONFIG_VIDEO_DT3155 is not set # CONFIG_TI_ST is not set # CONFIG_FB_XGI is not set # CONFIG_VIDEO_GO7007 is not set # CONFIG_I2C_BCM2048 is not set # CONFIG_VIDEO_TCM825X is not set -# CONFIG_USB_MSI3101 is not set # CONFIG_DT3155 is not set -# CONFIG_W35UND is not set # CONFIG_PRISM2_USB is not set # CONFIG_ECHO is not set CONFIG_USB_ATMEL=m # CONFIG_COMEDI is not set -# CONFIG_ASUS_OLED is not set # CONFIG_PANEL is not set -# CONFIG_TRANZPORT is not set -# CONFIG_POHMELFS is not set -# CONFIG_IDE_PHISON is not set # CONFIG_LINE6_USB is not set # CONFIG_VME_BUS is not set -# CONFIG_RAR_REGISTER is not set # CONFIG_VT6656 is not set -# CONFIG_USB_SERIAL_QUATECH_USB2 is not set # Larry Finger maintains these (rhbz 913753) CONFIG_RTLLIB=m CONFIG_RTLLIB_CRYPTO_CCMP=m @@ -5130,7 +4973,6 @@ CONFIG_RTLLIB_CRYPTO_WEP=m CONFIG_RTL8192E=m # CONFIG_INPUT_GPIO is not set # CONFIG_VIDEO_CX25821 is not set -# CONFIG_R8187SE is not set # CONFIG_R8188EU is not set # Larry Finger maintains (rhbz 1113422) CONFIG_R8192EE=m @@ -5138,48 +4980,25 @@ CONFIG_R8192EE=m # CONFIG_RTL8192U is not set CONFIG_R8723AU=m # Jes Sorensen maintains this (rhbz 1100162) # CONFIG_8723AU_AP_MODE is not set -# CONFIG_8723AU_P2P is not set # CONFIG_8723AU_BT_COEXIST is not set -# CONFIG_FB_SM7XX is not set -# CONFIG_SPECTRA is not set -# CONFIG_EASYCAP is not set # CONFIG_SOLO6X10 is not set -# CONFIG_ACPI_QUICKSTART is not set # CONFIG_LTE_GDM724X is not set CONFIG_R8712U=m # Larry Finger maintains this (rhbz 699618) -# CONFIG_R8712_AP is not set -# CONFIG_ATH6K_LEGACY is not set -# CONFIG_USB_ENESTORAGE is not set # CONFIG_BCM_WIMAX is not set -# CONFIG_USB_BTMTK is not set # CONFIG_FT1000 is not set # CONFIG_SPEAKUP is not set -# CONFIG_DX_SEP is not set # CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set # CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set -# CONFIG_RTS_PSTOR is not set CONFIG_ALTERA_STAPL=m # CONFIG_DVB_CXD2099 is not set # CONFIG_DVB_RTL2832_SDR is not set # CONFIG_PWM_FSL_FTM is not set # CONFIG_USBIP_CORE is not set # CONFIG_INTEL_MEI is not set -# CONFIG_ZCACHE is not set -# CONFIG_RTS5139 is not set -# CONFIG_NVEC_LEDS is not set # CONFIG_VT6655 is not set -# CONFIG_RAMSTER is not set # CONFIG_USB_WPAN_HCD is not set # CONFIG_WIMAX_GDM72XX is not set # CONFIG_IPACK_BUS is not set -# CONFIG_CSR_WIFI is not set -# CONFIG_ZCACHE2 is not set -# CONFIG_NET_VENDOR_SILICOM is not set -# CONFIG_SBYPASS is not set -# CONFIG_BPCTL is not set -# CONFIG_CED1401 is not set -# CONFIG_DGRP is not set -# CONFIG_SB105X is not set # CONFIG_LUSTRE_FS is not set # CONFIG_XILLYBUS is not set # CONFIG_DGAP is not set @@ -5200,7 +5019,6 @@ CONFIG_NOP_USB_XCEIV=m # CONFIG_IMA is not set CONFIG_IMA_MEASURE_PCR_IDX=10 -CONFIG_IMA_AUDIT=y CONFIG_IMA_LSM_RULES=y # CONFIG_EVM is not set @@ -5282,7 +5100,6 @@ CONFIG_GPIO_VIPERBOARD=m # CONFIG_RADIO_MIROPCM20 is not set # CONFIG_USB_GPIO_VBUS is not set # CONFIG_GPIO_SCH is not set -# CONFIG_GPIO_LANGWELL is not set # CONFIG_GPIO_RDC321X is not set # CONFIG_GPIO_VX855 is not set # CONFIG_GPIO_PCH is not set @@ -5300,7 +5117,6 @@ CONFIG_GPIO_VIPERBOARD=m # CONFIG_GPIO_MC33880 is not set # FIXME: Why? -CONFIG_EVENT_POWER_TRACING_DEPRECATED=y CONFIG_TEST_KSTRTOX=y CONFIG_XZ_DEC=y @@ -5341,7 +5157,6 @@ CONFIG_PSTORE_RAM=m # CONFIG_SIGMA is not set -CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 CONFIG_BCMA=m CONFIG_BCMA_BLOCKIO=y @@ -5381,10 +5196,6 @@ CONFIG_FMC_CHARDEV=m # CONFIG_MODULE_SIG is not set # CONFIG_SYSTEM_TRUSTED_KEYRING is not set # CONFIG_SYSTEM_BLACKLIST_KEYRING is not set -# CONFIG_MODULE_VERIFY_ELF is not set -# CONFIG_CRYPTO_KEY_TYPE is not set -# CONFIG_PGP_LIBRARY is not set -# CONFIG_PGP_PRELOAD is not set # CONFIG_RTC_DRV_EFI is not set # CONFIG_NET_XGENE is not set diff --git a/config-i686-PAE b/config-i686-PAE index fdc8a8bd40c3..eebaa6fba1fa 100644 --- a/config-i686-PAE +++ b/config-i686-PAE @@ -1,6 +1,5 @@ # CONFIG_HIGHMEM4G is not set CONFIG_HIGHMEM64G=y -# CONFIG_OLPC_OPENFIRMWARE is not set CONFIG_XEN_DEV_EVTCHN=m CONFIG_XEN_SYS_HYPERVISOR=y diff --git a/config-nodebug b/config-nodebug index 299016139d09..ed6913376e8f 100644 --- a/config-nodebug +++ b/config-nodebug @@ -31,14 +31,12 @@ CONFIG_CPUMASK_OFFSTACK=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_ACPI_DEBUG is not set -# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_PI_LIST is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_OBJECTS_SELFTEST is not set # CONFIG_DEBUG_OBJECTS_FREE is not set @@ -53,7 +51,6 @@ CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 # CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_DEBUG_NOTIFIERS is not set @@ -97,7 +94,6 @@ CONFIG_PM_ADVANCED_DEBUG=y # CONFIG_CEPH_LIB_PRETTYDEBUG is not set # CONFIG_QUOTA_DEBUG is not set -CONFIG_PCI_DEFAULT_USE_CRS=y CONFIG_KGDB_KDB=y CONFIG_KDB_KEYBOARD=y diff --git a/config-powerpc-generic b/config-powerpc-generic index b11dcd0c8a2f..bc0f9433e67e 100644 --- a/config-powerpc-generic +++ b/config-powerpc-generic @@ -14,7 +14,6 @@ CONFIG_TAU_AVERAGE=y # CONFIG_GEN_RTC is not set # CONFIG_GEN_RTC_X is not set CONFIG_RTC_DRV_GENERIC=y -CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set CONFIG_ADB=y @@ -64,17 +63,14 @@ CONFIG_NVRAM=y # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_IPS is not set -# CONFIG_NI52 is not set # CONFIG_NI65 is not set # CONFIG_LANCE is not set # CONFIG_3C515 is not set -# CONFIG_ELPLUS is not set CONFIG_MEMORY_HOTPLUG=y # Stuff which wants bus_to_virt() or virt_to_bus() # CONFIG_BLK_CPQ_DA is not set -# CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_ATM_HORIZON is not set # CONFIG_ATM_FIRESTREAM is not set @@ -96,7 +92,6 @@ CONFIG_PPC_MEDIA5200=y # CONFIG_PPC_LITE5200 is not set CONFIG_PPC_BESTCOMM=y CONFIG_PMAC_RACKMETER=m -CONFIG_USB_OHCI_HCD_PPC_SOC=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -185,7 +180,6 @@ CONFIG_PATA_OF_PLATFORM=m CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_MPC5121_ADS is not set -# CONFIG_MPC5121_GENERIC is not set CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_NAND_FSL_ELBC is not set CONFIG_THERMAL=y @@ -226,7 +220,6 @@ CONFIG_NET_VENDOR_IBM=y # CONFIG_QUICC_ENGINE is not set # CONFIG_QE_GPIO is not set -# CONFIG_MPC8xxx_GPIO is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -277,7 +270,6 @@ CONFIG_MMC_SDHCI_OF=m # CONFIG_CONSISTENT_SIZE_BOOL is not set -CONFIG_CAN_SJA1000_OF_PLATFORM=m CONFIG_PPC_EMULATED_STATS=y @@ -291,7 +283,6 @@ CONFIG_PPC_DISABLE_WERROR=y # CONFIG_XILINX_EMACLITE is not set CONFIG_GPIO_WM831X=m -# CONFIG_GPIO_LANGWELL is not set # CONFIG_GPIO_UCB1400 is not set # CONFIG_EDAC_MPC85XX is not set @@ -304,7 +295,6 @@ CONFIG_SPARSE_IRQ=y CONFIG_PATA_MACIO=y CONFIG_SERIAL_GRLIB_GAISLER_APBUART=m # CONFIG_PMIC_ADP5520 is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_MFD_MAX8997 is not set # CONFIG_MFD_TPS65910 is not set # CONFIG_MFD_TPS65912_I2C is not set @@ -313,7 +303,6 @@ CONFIG_SERIAL_GRLIB_GAISLER_APBUART=m # CONFIG_MMC_SDHCI_OF_ESDHC is not set # CONFIG_MMC_SDHCI_OF_HLWD is not set -# CONFIG_MFD_TC35892 is not set # CONFIG_MFD_AAT2870_CORE is not set # CONFIG_GPIO_SCH is not set @@ -367,10 +356,7 @@ CONFIG_PPC_DENORMALISATION=y # CONFIG_RTC_DRV_SNVS is not set # CONFIG_ASYMMETRIC_KEY_TYPE is not set -# CONFIG_OF_DISPLAY_TIMING is not set -# CONFIG_OF_VIDEOMODE is not set -# CONFIG_POWERNV_MSI is not set # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_POWER_RESET_GPIO=y diff --git a/config-powerpc64 b/config-powerpc64 index 32c8c6024d81..cd0f2d38cd9c 100644 --- a/config-powerpc64 +++ b/config-powerpc64 @@ -8,11 +8,9 @@ CONFIG_PPC_PMAC64=y CONFIG_PPC_MAPLE=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_IBM_CELL_BLADE is not set -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_PSERIES=y CONFIG_PPC_PMAC=y CONFIG_PPC_POWERNV=y -CONFIG_POWERNV_MSI=y CONFIG_PPC_POWERNV_RTAS=y CONFIG_SENSORS_IBMPOWERNV=y CONFIG_HW_RANDOM_POWERNV=m @@ -51,15 +49,10 @@ CONFIG_SCSI_IPR=m CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y CONFIG_HVC_RTAS=y -# CONFIG_HVC_ISERIES is not set CONFIG_HVC_OPAL=y # iSeries device drivers # -# CONFIG_ISERIES_VETH is not set -CONFIG_VIODASD=m -CONFIG_VIOCD=m -CONFIG_VIOTAPE=m CONFIG_PASEMI_MAC=m CONFIG_SERIAL_OF_PLATFORM=m @@ -86,10 +79,8 @@ CONFIG_NR_CPUS=1024 # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set -# CONFIG_POWER4_ONLY is not set CONFIG_RTAS_PROC=y -CONFIG_IOMMU_VMERGE=y CONFIG_NUMA=y CONFIG_NUMA_BALANCING=y CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y @@ -119,12 +110,10 @@ CONFIG_INFINIBAND_EHCA=m CONFIG_XMON_DISASSEMBLY=y -CONFIG_SCSI_IBMVSCSIS=m # CONFIG_TUNE_CELL is not set # CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_VIRQ_DEBUG is not set CONFIG_EDAC_CPC925=m CONFIG_FRAME_WARN=2048 diff --git a/config-powerpc64p7 b/config-powerpc64p7 index 48420dabdc2c..60baede68c1f 100644 --- a/config-powerpc64p7 +++ b/config-powerpc64p7 @@ -3,12 +3,9 @@ CONFIG_POWER7_CPU=y # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_IBM_CELL_BLADE is not set -# CONFIG_PPC_ISERIES is not set -# CONFIG_POWER3 is not set CONFIG_PPC_PSERIES=y # CONFIG_PPC_PMAC is not set CONFIG_PPC_POWERNV=y -CONFIG_POWERNV_MSI=y CONFIG_PPC_POWERNV_RTAS=y CONFIG_HW_RANDOM_POWERNV=m CONFIG_SENSORS_IBMPOWERNV=y @@ -43,15 +40,10 @@ CONFIG_SCSI_IPR=m CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y CONFIG_HVC_RTAS=y -# CONFIG_HVC_ISERIES is not set CONFIG_HVC_OPAL=y # iSeries device drivers # -# CONFIG_ISERIES_VETH is not set -CONFIG_VIODASD=m -CONFIG_VIOCD=m -CONFIG_VIOTAPE=m CONFIG_SERIAL_OF_PLATFORM=m @@ -77,10 +69,8 @@ CONFIG_NR_CPUS=1024 # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set -# CONFIG_POWER4_ONLY is not set CONFIG_RTAS_PROC=y -CONFIG_IOMMU_VMERGE=y CONFIG_NUMA=y CONFIG_NUMA_BALANCING=y CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y @@ -110,12 +100,10 @@ CONFIG_INFINIBAND_EHCA=m CONFIG_XMON_DISASSEMBLY=y -CONFIG_SCSI_IBMVSCSIS=m # CONFIG_TUNE_CELL is not set # CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_VIRQ_DEBUG is not set CONFIG_EDAC_CPC925=m CONFIG_FRAME_WARN=2048 diff --git a/config-s390x b/config-s390x index fe0df614b35b..f9472348dc69 100644 --- a/config-s390x +++ b/config-s390x @@ -14,7 +14,6 @@ CONFIG_HZ_100=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_LOG_BUF_SHIFT=16 -CONFIG_NO_IDLE_HZ=y # # I/O subsystem configuration @@ -25,13 +24,9 @@ CONFIG_QDIO=m # Misc # CONFIG_IPL=y -# CONFIG_IPL_TAPE is not set -CONFIG_IPL_VM=y -# CONFIG_PROCESS_DEBUG is not set CONFIG_PFAULT=y CONFIG_SHARED_KERNEL=y CONFIG_CMM=m -CONFIG_CMM_PROC=y # CONFIG_NETIUCV is not set CONFIG_SMSGIUCV=m CONFIG_CRASH_DUMP=y @@ -40,7 +35,6 @@ CONFIG_CRASH_DUMP=y # SCSI low-level drivers # CONFIG_ZFCP=m -CONFIG_ZFCPDUMP=y CONFIG_CCW=y # @@ -83,7 +77,6 @@ CONFIG_TN3270_FS=m # # S/390 tape interface support # -CONFIG_S390_TAPE_BLOCK=y # # S/390 tape hardware support @@ -149,10 +142,7 @@ CONFIG_CRYPTO_AES_S390=m # CONFIG_PACK_STACK=y CONFIG_CHECK_STACK=y -# CONFIG_WARN_STACK is not set -# CONFIG_SMALL_STACK is not set -CONFIG_ZVM_WATCHDOG=m CONFIG_DIAG288_WATCHDOG=m CONFIG_VMLOGRDR=m CONFIG_MONREADER=m @@ -171,15 +161,12 @@ CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_STACK_GUARD=256 CONFIG_CMM_IUCV=y -# CONFIG_DETECT_SOFTLOCKUP is not set CONFIG_S390_HYPFS_FS=y CONFIG_MONWRITER=m CONFIG_ZCRYPT=m -CONFIG_ZCRYPT_MONOLITHIC=y -CONFIG_S390_EXEC_PROTECT=y CONFIG_AFIUCV=m CONFIG_S390_PRNG=m @@ -218,7 +205,6 @@ CONFIG_SMSGIUCV_EVENT=m CONFIG_VMCP=y -CONFIG_ZFCP_DIF=y CONFIG_SCHED_MC=y CONFIG_SCHED_BOOK=y @@ -315,7 +301,6 @@ CONFIG_HOTPLUG_PCI_S390=y # CONFIG_FMC is not set -CONFIG_NETDEV_10000=y CONFIG_MLX4_EN=m CONFIG_MLX4_EN_DCB=y CONFIG_INFINIBAND=m diff --git a/config-x86-32-generic b/config-x86-32-generic index dac24a2c4773..13e1bac7008d 100644 --- a/config-x86-32-generic +++ b/config-x86-32-generic @@ -2,15 +2,9 @@ # CONFIG_X86_32_NON_STANDARD is not set -# CONFIG_X86_ELAN is not set # CONFIG_X86_GOLDFISH is not set -# CONFIG_X86_NUMAQ is not set -# CONFIG_X86_SUMMIT is not set CONFIG_X86_BIGSMP=y -# CONFIG_X86_VISWS is not set # CONFIG_X86_RDC321X is not set -# CONFIG_X86_ES7000 is not set -# CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set @@ -89,7 +83,6 @@ CONFIG_X86_LONGRUN=y # CONFIG_X86_E_POWERSAVER is not set CONFIG_X86_HT=y -CONFIG_X86_TRAMPOLINE=y # CONFIG_4KSTACKS is not set @@ -113,7 +106,6 @@ CONFIG_SCx200_ACB=m CONFIG_PC8736x_GPIO=m # CONFIG_NSC_GPIO is not set -CONFIG_CS5535_GPIO=m CONFIG_GPIO_SCH=m CONFIG_HW_RANDOM_GEODE=m @@ -143,7 +135,6 @@ CONFIG_LBDAF=y CONFIG_OLPC=y -CONFIG_OLPC_OPENFIRMWARE=y CONFIG_BATTERY_OLPC=y CONFIG_MOUSE_PS2_OLPC=y CONFIG_OLPC_XO1_PM=y @@ -160,10 +151,8 @@ CONFIG_RCU_FANOUT=32 # CONFIG_X86_ANCIENT_MCE is not set -# CONFIG_X86_MRST is not set CONFIG_I2C_PXA=m -# CONFIG_GPIO_LANGWELL is not set # CONFIG_INTEL_TXT is not set @@ -184,7 +173,6 @@ CONFIG_POWER_RESET_GPIO=y CONFIG_MTD_OF_PARTS=y CONFIG_MTD_PHYSMAP_OF=m -CONFIG_PROC_DEVICETREE=y CONFIG_SERIAL_OF_PLATFORM=m CONFIG_SERIAL_GRLIB_GAISLER_APBUART=m # CONFIG_MMC_SDHCI_OF is not set @@ -209,7 +197,6 @@ CONFIG_BACKLIGHT_PWM=m # CONFIG_EDAC_SBRIDGE is not set -# CONFIG_X86_WANT_INTEL_MID is not set # CONFIG_OF_SELFTEST is not set # CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set # CONFIG_INPUT_GP2A is not set @@ -223,12 +210,9 @@ CONFIG_BACKLIGHT_PWM=m # CONFIG_BACKLIGHT_OT200 is not set # CONFIG_RTC_DRV_SNVS is not set # CONFIG_RTC_DRV_HYM8563 is not set -# CONFIG_OF_DISPLAY_TIMING is not set -# CONFIG_OF_VIDEOMODE is not set # CONFIG_MLX5_INFINIBAND is not set # CONFIG_PINCTRL_SINGLE is not set -# CONFIG_PINCTRL_CAPRI is not set # CONFIG_PINCTRL_MSM8X74 is not set # CONFIG_PINCTRL_BCM281XX is not set # CONFIG_PINCTRL_APQ8064 is not set diff --git a/config-x86-generic b/config-x86-generic index fb687bb2fd23..686972fdd6a7 100644 --- a/config-x86-generic +++ b/config-x86-generic @@ -52,7 +52,6 @@ CONFIG_EFI_RUNTIME_MAP=y # CONFIG_FB_N411 is not set CONFIG_INTEL_IOMMU=y -CONFIG_DMAR_BROKEN_GFX_WA=y CONFIG_INTEL_IOMMU_FLOPPY_WA=y # CONFIG_INTEL_IOMMU_DEFAULT_ON is not set CONFIG_SCSI_ADVANSYS=m @@ -71,7 +70,6 @@ CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_ACPI=y CONFIG_ACPI_AC=y -# CONFIG_ACPI_ASUS is not set CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_CONTAINER=y @@ -88,7 +86,6 @@ CONFIG_ACPI_VIDEO=m CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y # FIXME: Next two are deprecated. Remove them when they disappear upstream # CONFIG_ACPI_PROCFS_POWER is not set -# CONFIG_ACPI_PROC_EVENT is not set CONFIG_PNPACPI=y CONFIG_ACPI_PROCESSOR_AGGREGATOR=m CONFIG_ACPI_HED=m @@ -245,7 +242,6 @@ CONFIG_PVPANIC=m # CONFIG_TOUCHSCREEN_INTEL_MID is not set # CONFIG_SMSC37B787_WDT is not set -CONFIG_W83697HF_WDT=m CONFIG_VIA_WDT=m CONFIG_IE6XX_WDT=m @@ -269,7 +265,6 @@ CONFIG_PARAVIRT_TIME_ACCOUNTING=y # PARAVIRT_SPINLOCKS has a 5% perf hit on native hw (see kconfig) # CONFIG_PARAVIRT_SPINLOCKS is not set -CONFIG_KVM_CLOCK=y CONFIG_KVM_GUEST=y CONFIG_KVM_MMU_AUDIT=y # default $x would be nice... # CONFIG_KVM_DEBUG_FS is not set @@ -293,7 +288,6 @@ CONFIG_XEN_COMPAT_XENFS=y CONFIG_XEN_BACKEND=y CONFIG_XEN_BLKDEV_BACKEND=m CONFIG_XEN_DEBUG_FS=y -CONFIG_XEN_PLATFORM_PCI=y CONFIG_XEN_GNTDEV=m CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m CONFIG_XEN_SELFBALLOONING=y @@ -417,7 +411,6 @@ CONFIG_PCI_CNB20LE_QUIRK=y CONFIG_ACPI_EC_DEBUGFS=m # CONFIG_ACPI_APEI_ERST_DEBUG is not set -# CONFIG_ACPI_QUICKSTART is not set CONFIG_INTEL_IDLE=y diff --git a/config-x86_64-generic b/config-x86_64-generic index 2f6155f6673c..de4671325564 100644 --- a/config-x86_64-generic +++ b/config-x86_64-generic @@ -9,7 +9,6 @@ CONFIG_GENERIC_CPU=y CONFIG_X86_UV=y CONFIG_UV_MMTIMER=m CONFIG_NUMA=y -CONFIG_K8_NUMA=y CONFIG_AMD_NUMA=y CONFIG_X86_64_ACPI_NUMA=y # CONFIG_NUMA_EMU is not set @@ -67,7 +66,6 @@ CONFIG_CRYPTO_SHA1_SSSE3=m CONFIG_CRYPTO_SHA256_SSSE3=m CONFIG_CRYPTO_SHA512_SSSE3=m CONFIG_CRYPTO_BLOWFISH_X86_64=m -CONFIG_CRYPTO_BLOWFISH_AVX2_X86_64=m CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m CONFIG_CRYPTO_CAMELLIA_X86_64=m CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m @@ -78,7 +76,6 @@ CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m CONFIG_CRYPTO_SERPENT_AVX_X86_64=m CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m -CONFIG_CRYPTO_TWOFISH_AVX2_X86_64=m CONFIG_CRYPTO_DES3_EDE_X86_64=m # staging crypto # CONFIG_CRYPTO_SKEIN is not set @@ -150,7 +147,6 @@ CONFIG_RCU_FANOUT=64 CONFIG_INTEL_TXT=y -CONFIG_GPIO_LANGWELL=y CONFIG_FUNCTION_GRAPH_TRACER=y @@ -178,10 +174,8 @@ CONFIG_MLX4_EN_DCB=y CONFIG_SFC=m CONFIG_SFC_MCDI_MON=y CONFIG_SFC_SRIOV=y -CONFIG_SFC_PTP=y CONFIG_SFC_MTD=y # Override MTD stuff because SFC_MTD needs it -CONFIG_MTD_CHAR=m CONFIG_MTD_BLOCK=m CONFIG_NO_HZ_FULL=y -- 1.9.3

2 2

[PATCH] enable firmware assisted dump on PPC
by Dan Horák 01 Oct '14

01 Oct '14

also remove the old option PHYP_DUMP --- config-powerpc64 | 2 +- config-powerpc64p7 | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/config-powerpc64 b/config-powerpc64 index 44c2c51..32c8c60 100644 --- a/config-powerpc64 +++ b/config-powerpc64 @@ -129,7 +129,6 @@ CONFIG_SCSI_IBMVSCSIS=m CONFIG_EDAC_CPC925=m CONFIG_FRAME_WARN=2048 -CONFIG_PHYP_DUMP=y CONFIG_FORCE_MAX_ZONEORDER=9 CONFIG_VIRTUALIZATION=y @@ -140,6 +139,7 @@ CONFIG_SCSI_IBMVFC=m CONFIG_IBM_BSR=m CONFIG_CRASH_DUMP=y +CONFIG_FA_DUMP=y CONFIG_RELOCATABLE=y CONFIG_RCU_FANOUT=64 diff --git a/config-powerpc64p7 b/config-powerpc64p7 index 4021f7d..48420da 100644 --- a/config-powerpc64p7 +++ b/config-powerpc64p7 @@ -120,7 +120,6 @@ CONFIG_SCSI_IBMVSCSIS=m CONFIG_EDAC_CPC925=m CONFIG_FRAME_WARN=2048 -CONFIG_PHYP_DUMP=y CONFIG_FORCE_MAX_ZONEORDER=9 CONFIG_VIRTUALIZATION=y @@ -131,6 +130,7 @@ CONFIG_SCSI_IBMVFC=m CONFIG_IBM_BSR=m CONFIG_CRASH_DUMP=y +CONFIG_FA_DUMP=y CONFIG_RELOCATABLE=y CONFIG_RCU_FANOUT=64 -- 1.9.3

3 6

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

kernel October 2014