January 2023 - kernel - Fedora mailing-lists

[OS-BUILD PATCHv3 0/3] Turn off forced debug builds
by Justin M. Forbes (via Email Bridge) 27 Jan '23

27 Jan '23

From: Justin M. Forbes on gitlab.com Merge Request: https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2263 For many years, rawhide kernels have forced users to run debug builds on git snapshots by not building a non debug kernel as an option. While this has served us well, in finding occasional bugs that are less likely to surface otherwise, the performance of debug kernels has gotten considerably worse over time. After evaluating the debug configs to see if performance could be improved, it has become clear that we would have to trade off too much to regain performance. We would be better served by leaving more debug options enabled and offering a non debug kernel for all users on all builds. Signed-off-by: Justin M. Forbes <jforbes(a)fedoraproject.org> --- redhat/scripts/genspec/genspec.sh | 13 +++++-------- redhat/self-test/data/centos-78e36f3b0dae.el7.spec | 1 - redhat/self-test/data/centos-78e36f3b0dae.fc25.spec | 1 - redhat/self-test/data/centos-fce15c45d3fb.el7.spec | 1 - redhat/self-test/data/centos-fce15c45d3fb.fc25.spec | 1 - redhat/self-test/data/fedora-78e36f3b0dae.el7.spec | 1 - redhat/self-test/data/fedora-78e36f3b0dae.fc25.spec | 1 - redhat/self-test/data/fedora-fce15c45d3fb.el7.spec | 1 - redhat/self-test/data/fedora-fce15c45d3fb.fc25.spec | 1 - redhat/self-test/data/rhel-78e36f3b0dae.el7.spec | 1 - redhat/self-test/data/rhel-78e36f3b0dae.fc25.spec | 1 - redhat/self-test/data/rhel-fce15c45d3fb.el7.spec | 1 - redhat/self-test/data/rhel-fce15c45d3fb.fc25.spec | 1 - redhat/kernel.spec.template | 4 ++-- 14 files changed, 7 insertions(+), 22 deletions(-)

2 4

[OS-BUILD PATCH 0/0] General cleanups
by pbrobinson (via Email Bridge) 27 Jan '23

27 Jan '23

From: pbrobinson on gitlab.com Merge Request: https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2256 NOTE: Truncated patchset due to missing public @redhat.com email address on your GitLab profile at https://gitlab.com/-/profile. Once that is fixed, close and reopen the merge request to retrigger sending the emails. Clean up a few options between ARK and Fedora. It also removes a few options removed upstream. There's no function changes here. Signed-off-by: Peter Robinson <pbrobinson(a)redhat.com> --- redhat/configs/ark/generic/arm/aarch64/CONFIG_SMC911X | 1 - redhat/configs/ark/generic/s390x/CONFIG_CDROM_PKTCDVD => redhat/configs/common/generic/s390x/CONFIG_CDROM_PKTCDVD | 0 redhat/configs/ark/generic/CONFIG_EFI_FAKE_MEMMAP => redhat/configs/common/generic/x86/CONFIG_EFI_FAKE_MEMMAP | 0 redhat/configs/common/generic/x86/CONFIG_EFI_STUB | 1 - redhat/configs/ark/generic/CONFIG_CDROM_PKTCDVD_BUFFERS => redhat/configs/common/generic/CONFIG_CDROM_PKTCDVD_BUFFERS | 0 redhat/configs/common/generic/CONFIG_CRYPTO_GF128MUL | 1 - redhat/configs/common/generic/CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER | 1 - redhat/configs/ark/generic/CONFIG_EFI_HANDOVER_PROTOCOL => redhat/configs/common/generic/CONFIG_EFI_HANDOVER_PROTOCOL | 0 redhat/configs/ark/generic/arm/aarch64/CONFIG_EFI_STUB => redhat/configs/common/generic/CONFIG_EFI_STUB | 0 redhat/configs/fedora/generic/s390x/CONFIG_CDROM_PKTCDVD | 1 - redhat/configs/fedora/generic/x86/CONFIG_EFI_FAKE_MEMMAP | 1 - redhat/configs/fedora/generic/CONFIG_CDROM_PKTCDVD_BUFFERS | 1 - redhat/configs/fedora/generic/CONFIG_EFI_HANDOVER_PROTOCOL | 14 ---------- 13 files changed, 0 insertions(+), 21 deletions(-)

2 1

Rawhide and debug kernels
by Justin Forbes 27 Jan '23

27 Jan '23

For a *very* long time, Rawhide has built rcX kernels as "release" kernels and daily git snapshots as debug kernels only. This has brought attention to some issues that might otherwise be missed. Specifically around things like lockdep. Unfortunately, even without changing our selected debug options, performance has gotten considerably worse for these debug kernels due to upstream code changes. At the same time, we do have some additional automated testing happening now that was not happening before, which we can explicitly point at debug kernels. I am wondering if it is time to switch rawhide to work the way that everything else does, building both debug and nodebug builds every day, instead of forcing debug builds 80% of the time. It would mean a reduction in coverage, but I am not sure by how much, as I get the impression that most rawhide users are sticking to the nodebug kernels anyway. It would also allow us to turn on some more debug features for our debug kernels that are a bit more performance limiting, but extremely useful. We have left them off in Fedora specifically because they were too heavy weight for expecting users to run them. So, what does the community think? Should we continue as is, or should we move to a more typical model where both debug and non-debug kernels are build with every build? Thanks, Justin

5 6

[OS-BUILD PATCH] redhat: ignore rpminspect runpath report on urandom_read selftest binaries
by Herton R. Krzesinski (via Email Bridge) 26 Jan '23

26 Jan '23

From: Herton R. Krzesinski <herton(a)redhat.com> redhat: ignore rpminspect runpath report on urandom_read selftest binaries Upstream Status: RHEL only Since a recent bpf update on the kernel, rpminspect started to report the following issue in the urandom_read selftest binaries: /usr/libexec/kselftests/bpf/(...)urandom_read has an invalid-looking DT_RPATH on <arch>: . This is expected since upstream commit: 00a0fa2d7d49 ("selftests/bpf: Add urandom_read shared lib and USDTs") As the selftest binary uses shared library linked from the current directory. Thus add the reported binaries to the ignore list in rpminspect configuration so this doesn't get reported every rpminspect CI run. Signed-off-by: Herton R. Krzesinski <herton(a)redhat.com> diff --git a/redhat/scripts/gating/rpminspect.yaml b/redhat/scripts/gating/rpminspect.yaml index blahblah..blahblah 100644 --- a/redhat/scripts/gating/rpminspect.yaml +++ b/redhat/scripts/gating/rpminspect.yaml @@ -24,3 +24,8 @@ patches: ignore_list: - linux-kernel-test.patch - patch-%%SPECKVERSION%%.%%SPECKPATCHLEVEL%%-redhat.patch + +runpath: + ignore: + - /usr/libexec/kselftests/bpf/urandom_read + - /usr/libexec/kselftests/bpf/no_alu32/urandom_read -- https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2270

1 0

[OS-BUILD PATCH 0/2] redhat: update merge.py to handle merge.pl corner cases
by Clark Williams (via Email Bridge) 26 Jan '23

26 Jan '23

From: Clark Williams on gitlab.com Merge Request: https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2262 Change merge.py to handle input config files in similar manner to how merge.pl did it. Signed-off-by: Clark Williams <williams(a)redhat.com> --- redhat/configs/merge.pl | 72 ----------------------------- redhat/configs/merge.py | 107 ++++++++++++++++++++++++++----------------- redhat/Makefile | 2 +- redhat/kernel.spec.template | 10 ++-- 4 files changed, 71 insertions(+), 120 deletions(-)

2 3

[OS-BUILD PATCH] redhat/configs: Strong stack protector for fedora
by Miko Larsson (via Email Bridge) 26 Jan '23

26 Jan '23

From: Miko Larsson <mikoxyzzz(a)gmail.com> redhat/configs: Strong stack protector for fedora ark has had the strong stack protector enabled since at least three years ago without any issues. Might as well enable it for fedora too for the improved stack protection by moving CONFIG_STACKPROTECTOR_STRONG (and CONFIG_STACKPROTECTOR for good measure) into the common config dir. Signed-off-by: Miko Larsson <mikoxyzzz(a)gmail.com> diff --git a/redhat/configs/ark/generic/CONFIG_STACKPROTECTOR b/redhat/configs/common/generic/CONFIG_STACKPROTECTOR rename from redhat/configs/ark/generic/CONFIG_STACKPROTECTOR rename to redhat/configs/common/generic/CONFIG_STACKPROTECTOR index blahblah..blahblah 100644 --- a/redhat/configs/ark/generic/CONFIG_STACKPROTECTOR +++ b/redhat/configs/common/generic/CONFIG_STACKPROTECTOR diff --git a/redhat/configs/ark/generic/CONFIG_STACKPROTECTOR_STRONG b/redhat/configs/common/generic/CONFIG_STACKPROTECTOR_STRONG rename from redhat/configs/ark/generic/CONFIG_STACKPROTECTOR_STRONG rename to redhat/configs/common/generic/CONFIG_STACKPROTECTOR_STRONG index blahblah..blahblah 100644 --- a/redhat/configs/ark/generic/CONFIG_STACKPROTECTOR_STRONG +++ b/redhat/configs/common/generic/CONFIG_STACKPROTECTOR_STRONG diff --git a/redhat/configs/fedora/generic/CONFIG_STACKPROTECTOR_STRONG b/redhat/configs/fedora/generic/CONFIG_STACKPROTECTOR_STRONG deleted file mode 100644 index blahblah..blahblah 0 --- a/redhat/configs/fedora/generic/CONFIG_STACKPROTECTOR_STRONG +++ /dev/null @@ -1 +0,0 @@ -# CONFIG_STACKPROTECTOR_STRONG is not set diff --git a/redhat/configs/fedora/generic/powerpc/CONFIG_STACKPROTECTOR b/redhat/configs/fedora/generic/powerpc/CONFIG_STACKPROTECTOR deleted file mode 100644 index blahblah..blahblah 0 --- a/redhat/configs/fedora/generic/powerpc/CONFIG_STACKPROTECTOR +++ /dev/null @@ -1 +0,0 @@ -CONFIG_STACKPROTECTOR=y diff --git a/redhat/configs/fedora/generic/x86/CONFIG_STACKPROTECTOR b/redhat/configs/fedora/generic/x86/CONFIG_STACKPROTECTOR deleted file mode 100644 index blahblah..blahblah 0 --- a/redhat/configs/fedora/generic/x86/CONFIG_STACKPROTECTOR +++ /dev/null @@ -1 +0,0 @@ -CONFIG_STACKPROTECTOR=y -- https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2269

2 2

[OS-BUILD PATCHv2 0/0] fedora: enable STACKPROTECTOR on arm platforms
by pbrobinson (via Email Bridge) 26 Jan '23

26 Jan '23

From: pbrobinson on gitlab.com Merge Request: https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2268 NOTE: Truncated patchset due to missing public @redhat.com email address on your GitLab profile at https://gitlab.com/-/profile. Once that is fixed, close and reopen the merge request to retrigger sending the emails. It's enabled on all other Fedora architectures and there's no reason arm architectures should be any different here. It was likely an oversight. Minor config cleanup while at it. Signed-off-by: Peter Robinson <pbrobinson(a)redhat.com> --- redhat/configs/fedora/generic/arm/armv7/CONFIG_STACKPROTECTOR_PER_TASK | 1 + redhat/configs/fedora/generic/arm/CONFIG_STACKPROTECTOR | 1 - redhat/configs/fedora/generic/x86/CONFIG_STACKPROTECTOR | 1 - redhat/configs/fedora/generic/powerpc/CONFIG_STACKPROTECTOR => redhat/configs/fedora/generic/CONFIG_STACKPROTECTOR | 0 redhat/configs/fedora/generic/CONFIG_STACKPROTECTOR_STRONG | 2 +- 5 files changed, 2 insertions(+), 3 deletions(-)

1 1

[OS-BUILD PATCH 0/0] fedora: enable STACKPROTECTOR on arm platforms
by pbrobinson (via Email Bridge) 25 Jan '23

25 Jan '23

From: pbrobinson on gitlab.com Merge Request: https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2268 NOTE: Truncated patchset due to missing public @redhat.com email address on your GitLab profile at https://gitlab.com/-/profile. Once that is fixed, close and reopen the merge request to retrigger sending the emails. It's enabled on all other Fedora architectures and there's no reason arm architectures should be any different here. It was likely an oversight. Minor config cleanup while at it. Signed-off-by: Peter Robinson <pbrobinson(a)redhat.com> --- redhat/configs/fedora/generic/arm/CONFIG_STACKPROTECTOR | 1 - redhat/configs/fedora/generic/x86/CONFIG_STACKPROTECTOR | 1 - redhat/configs/fedora/generic/powerpc/CONFIG_STACKPROTECTOR => redhat/configs/fedora/generic/CONFIG_STACKPROTECTOR | 0 redhat/configs/fedora/generic/CONFIG_STACKPROTECTOR_STRONG | 2 +- 4 files changed, 1 insertions(+), 3 deletions(-)

2 1

[OS-BUILD PATCHv2] Revert "redhat: fix elf got hardening for vm tools"
by Don Zickus (via Email Bridge) 25 Jan '23

25 Jan '23

From: Don Zickus <dzickus(a)redhat.com> Revert "redhat: fix elf got hardening for vm tools" This reverts commit eb5aebd77015bc57616c5d05a7b6206c8ff871cb. A recent rework of the tools/vm area relies on a proper CFLAGS definition to include the proper header files. The kernel.spec file purposely overwrites the CFLAGS to get the right switches to pass rpminspect. As a consequence tools/vm fails to compile. For now just revert the change and await a proper fix. To duplicate: cd tools/vm make CFLAGS= slabinfo page_owner_sort make -C ../lib/api make[1]: Entering directory '/home/dzickus/devel/git/kernel-ark/tools/lib/api' /usr/bin/make -C /home/dzickus/devel/git/kernel-ark/tools/build CFLAGS= LDFLAGS= fixdep CC fd/array.o LD fd/libapi-in.o CC fs/fs.o fs/fs.c:17:10: fatal error: debug-internal.h: No such file or directory 17 | #include "debug-internal.h" | ^~~~~~~~~~~~~~~~~~ compilation terminated. make[3]: *** [/home/dzickus/devel/git/kernel-ark/tools/build/Makefile.build:97: fs/fs.o] Error 1 make[2]: *** [/home/dzickus/devel/git/kernel-ark/tools/build/Makefile.build:139: fs] Error 2 make[1]: *** [Makefile:79: libapi-in.o] Error 2 make[1]: Leaving directory '/home/dzickus/devel/git/kernel-ark/tools/lib/api' make: *** [Makefile:19: ../lib/api/libapi.a] Error 2 Signed-off-by: Don Zickus <dzickus(a)redhat.com> diff --git a/redhat/kernel.spec.template b/redhat/kernel.spec.template index blahblah..blahblah 100755 --- a/redhat/kernel.spec.template +++ b/redhat/kernel.spec.template @@ -2340,7 +2340,7 @@ pushd tools/gpio/ popd # build VM tools pushd tools/vm/ -%{tools_make} CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" slabinfo page_owner_sort +%{tools_make} slabinfo page_owner_sort popd pushd tools/tracing/rtla %{tools_make} -- https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2236

4 11

[OS-BUILD PATCH] redhat/configs: Turn on CONFIG_SPI_TEGRA210_QUAD for RHEL
by Mark Salter (via Email Bridge) 25 Jan '23

25 Jan '23

From: Mark Salter <msalter(a)redhat.com> redhat/configs: Turn on CONFIG_SPI_TEGRA210_QUAD for RHEL Delete current comfig from ark and move fedora config to common. Signed-off-by: Mark Salter <msalter(a)redhat.com> diff --git a/redhat/configs/ark/generic/arm/aarch64/CONFIG_SPI_TEGRA210_QUAD b/redhat/configs/ark/generic/arm/aarch64/CONFIG_SPI_TEGRA210_QUAD deleted file mode 100644 index blahblah..blahblah 0 --- a/redhat/configs/ark/generic/arm/aarch64/CONFIG_SPI_TEGRA210_QUAD +++ /dev/null @@ -1 +0,0 @@ -# CONFIG_SPI_TEGRA210_QUAD is not set diff --git a/redhat/configs/fedora/generic/arm/CONFIG_SPI_TEGRA210_QUAD b/redhat/configs/common/generic/arm/CONFIG_SPI_TEGRA210_QUAD rename from redhat/configs/fedora/generic/arm/CONFIG_SPI_TEGRA210_QUAD rename to redhat/configs/common/generic/arm/CONFIG_SPI_TEGRA210_QUAD index blahblah..blahblah 100644 --- a/redhat/configs/fedora/generic/arm/CONFIG_SPI_TEGRA210_QUAD +++ b/redhat/configs/common/generic/arm/CONFIG_SPI_TEGRA210_QUAD -- https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2266

2 1

[OS-BUILD PATCHv2] kernel.spec: add llvm-devel build requirement
by Scott Weaver (via Email Bridge) 25 Jan '23

25 Jan '23

From: Scott Weaver <scweaver(a)redhat.com> kernel.spec: add llvm-devel build requirement The bpftool and the llvm system feature check requires the llvm-devel package. The bpftool package is only created if selftests is defined and when selftests is enabled, then samples/bpf will be built which will use the llvm feature check. Therefore the llvm-devel package is added as a build requirement of selftests to keep it consistent with the llvm package already specified there. This change came in eb9d1acf634ba ('bpftool: Add LLVM as default library for disassembling JIT-ed programs'). Signed-off-by: Scott Weaver <scweaver(a)redhat.com> diff --git a/redhat/kernel.spec.template b/redhat/kernel.spec.template index blahblah..blahblah 100755 --- a/redhat/kernel.spec.template +++ b/redhat/kernel.spec.template @@ -635,7 +635,7 @@ BuildRequires: python3-docutils BuildRequires: zlib-devel binutils-devel %endif %if %{with_selftests} -BuildRequires: clang llvm fuse-devel +BuildRequires: clang llvm llvm-devel fuse-devel %ifnarch %{arm} BuildRequires: numactl-devel %endif -- https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2264

1 1

❌ FAIL (17/301 SKIPPED): Test report for 6.1.8-200.fc37 (fedora-37)
by cki-project＠redhat.com 25 Jan '23

25 Jan '23

Hi, we tested your kernel and here are the results: Overall result: FAILED Merge: OK Compile: OK Test: FAILED Kernel information: Brew / Koji Task ID: 96628555 You can find all the details about the test run at https://datawarehouse.cki-project.org/kcidb/checkouts/66965 One or more kernel tests failed: Unrecognized or new issues: aarch64 - Boot test Logs: https://datawarehouse.cki-project.org/kcidb/tests/6807697 We also see the following known issues which are not related to your changes: Issue: NFS Connectathon: SELinux prevents rpcbind URL: https://gitlab.com/redhat/centos-stream/tests/kernel/kernel-tests/-/issues/… Affected tests: aarch64 - NFS Connectathon ppc64le - NFS Connectathon x86_64 - NFS Connectathon Issue: Storage blktests - blk: scsi/007: Reading from scsi_debug failed URL: https://bugzilla.redhat.com/show_bug.cgi?id=2027550 Affected tests: s390x - Storage - blktests - blk If you find a failure unrelated to your changes, please ask the test maintainer to review it. This will prevent the failures from being incorrectly reported in the future. Please reply to this email if you have any questions about the tests that we ran or if you have any suggestions on how to make future tests more effective. ,-. ,-. ( C ) ( K ) Continuous `-',-.`-' Kernel ( I ) Integration `-' ______________________________________________________________________________

1 0

[OS-BUILD PATCH] kernel.spec: add llvm-devel build requirement
by Scott Weaver (via Email Bridge) 24 Jan '23

24 Jan '23

From: Scott Weaver <scweaver(a)redhat.com> kernel.spec: add llvm-devel build requirement The bpftool and selftests feature check requires the llvm-devel package as well as the bpftool itself (if llvm is available). The bpftool package is only created if selftests is defined, therefore the llvm-devel package is added as a build requirement of selftests to keep it consistent with the llvm package already specified. This change came in eb9d1acf634ba ('bpftool: Add LLVM as default library for disassembling JIT-ed programs'). Signed-off-by: Scott Weaver <scweaver(a)redhat.com> diff --git a/redhat/kernel.spec.template b/redhat/kernel.spec.template index blahblah..blahblah 100755 --- a/redhat/kernel.spec.template +++ b/redhat/kernel.spec.template @@ -635,7 +635,7 @@ BuildRequires: python3-docutils BuildRequires: zlib-devel binutils-devel %endif %if %{with_selftests} -BuildRequires: clang llvm fuse-devel +BuildRequires: clang llvm llvm-devel fuse-devel %ifnarch %{arm} BuildRequires: numactl-devel %endif -- https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2264

2 2

[OS-BUILD PATCHv6] redhat: Add sub-RPM with a EFI unified kernel image for virtual machines
by Vitaly Kuznetsov (via Email Bridge) 24 Jan '23

24 Jan '23

From: Vitaly Kuznetsov <vkuznets(a)redhat.com> redhat: Add sub-RPM with a EFI unified kernel image for virtual machines The new 'kernel-unified-virt' sub-RPM is added on x86_64 targets. This contains an EFI application that provides a combined vmlinux, initrd and cmdline, as a so called 'unified kernel image'. The spec for this is defined by the boot loader specification https://uapi-group.org/specifications/specs/boot_loader_specification/ The key benefit of a unified kernel is that its secure boot signature covers the initrd and cmdline contents, allowing a trustworthy measured boot process with attestation, which is not practical with locally generated initrds/cmdlines. Since the initrd is pre-generated its contents have to be very generic, to be usable on a wide variety of deployments. To make this problem tractable, the sub-RPM targets only usage in virtual machines. With such a restriction, the initrd only needs a very small set of block driver modules present, in order to be usable across KVM, Hyper-V and Xen hypervisors which will cover essentially all common public and private clouds. Similarly the kernel cmdline cannot contain any host specific data, which means the root filesystem to mount needs to be able to be automatically detected. A virtual machine image intending to use this unified kernel package thus needs to comply with the discoverable partitions specification: https://uapi-group.org/specifications/specs/discoverable_partitions_specifi… Based-on-patch-by: Daniel P. Berrangé <berrange(a)redhat.com> Based-on-patch-by: Gerd Hoffmann <kraxel(a)redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets(a)redhat.com> diff --git a/redhat/Makefile b/redhat/Makefile index blahblah..blahblah 100644 --- a/redhat/Makefile +++ b/redhat/Makefile @@ -639,6 +639,7 @@ sources-rh: $(TARBALL) generate-testpatch-tmp setup-source dist-configs-check ../Makefile.rhelver \ README.rst \ kernel-local \ + dracut-virt.conf \ $(SOURCES)/ @if [ "$(RELEASED_KERNEL)" -ne 0 ]; then \ cp keys/redhatsecureboot{301,501,ca5,ca1}.cer $(SOURCES)/; \ diff --git a/redhat/dracut-virt.conf b/redhat/dracut-virt.conf new file mode 100644 index blahblah..blahblah 100644 --- /dev/null +++ b/redhat/dracut-virt.conf @@ -0,0 +1,35 @@ +# generic + compressed please +hostonly="no" +compress="xz" + +# VMs can't update microcode anyway +early_microcode="no" + +# modules: basics +dracutmodules+=" base systemd systemd-initrd dracut-systemd dbus dbus-broker usrmount shutdown " + +# modules: storage support +dracutmodules+=" dm lvm rootfs-block fs-lib " + +# modules: tpm and crypto +dracutmodules+=" crypt crypt-loop tpm2-tss " + +# drivers: virtual buses, pci +drivers+=" virtio-pci virtio-mmio " # qemu-kvm +drivers+=" hv-vmbus pci-hyperv " # hyperv +drivers+=" xen-pcifront " # xen + +# drivers: storage +drivers+=" ahci nvme scsi-hd scsi-cd " # generic +drivers+=" virtio-blk virtio-scsi " # qemu-kvm +drivers+=" hv-storvsc sd_mod " # hyperv +drivers+=" xen-blkfront " # xen + +# root encryption +drivers+=" dm_crypt " + +# filesystems +filesystems+=" vfat ext4 xfs overlay " + +# systemd-pcrphase +install_items+=" /lib/systemd/system/systemd-pcrphase-initrd.service /usr/lib/systemd/systemd-pcrphase /usr/lib/systemd/system/initrd.target.wants/systemd-pcrphase-initrd.service " diff --git a/redhat/kernel.spec.template b/redhat/kernel.spec.template index blahblah..blahblah 100755 --- a/redhat/kernel.spec.template +++ b/redhat/kernel.spec.template @@ -91,6 +91,12 @@ Summary: The Linux kernel %global zipmodules 1 %endif +%ifarch x86_64 +%global efiuki 1 +%else +%global efiuki 0 +%endif + %if %{zipmodules} %global zipsed -e 's/\.ko$/\.ko.xz/' %endif @@ -699,6 +705,21 @@ BuildRequires: llvm BuildRequires: lld %endif +%if %{efiuki} +BuildRequires: dracut +# For dracut UEFI uki binaries +BuildRequires: binutils +# For the initrd +BuildRequires: lvm2 +%if 0%{?fedora} > 37 +BuildRequires: systemd-boot-unsigned +%endif +# For systemd-stub and systemd-pcrphase +BuildRequires: systemd-udev >= 252-1 +# For TPM operations in UKI initramfs +BuildRequires: tpm2-tools +%endif + # Because this is the kernel, it's hard to get a single upstream URL # to represent the base without needing to do a bunch of patching. This # tarball is generated from a src-git tree. If you want to see the @@ -826,6 +847,8 @@ Source82: update_scripts.sh Source84: mod-internal.list Source85: mod-partner.list +Source86: dracut-virt.conf + Source100: rheldup3.x509 Source101: rhelkpatch1.x509 @@ -1331,6 +1354,13 @@ Requires: kernel-%{?1:%{1}-}-modules-core-uname-r = %{KVERREL}%{?1:+%{1}}\ %endif\ %{expand:%%kernel_debuginfo_package %{?1:%{1}}}\ %endif\ +%if %{efiuki}\ +%package %{?1:%{1}-}uki-virt\ +Summary: %{variant_summary} unified kernel image for virtual machines\ +Provides: installonlypkg(kernel)\ +Provides: kernel-%{?1:%{1}-}uname-r = %{KVERREL}%{?1:+%{1}}\ +Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{?1:+%{1}}\ +%endif\ %{nil} # @@ -1400,6 +1430,14 @@ Linux operating system. The kernel handles the basic functions of the operating system: memory allocation, process allocation, device input and output, etc. +%if %{efiuki} +%description debug-uki-virt +Prebuilt debug unified kernel image for virtual machines. + +%description uki-virt +Prebuilt default unified kernel image for virtual machines. +%endif + %if %{with_ipaclones} %kernel_ipaclones_package %endif @@ -2180,6 +2218,45 @@ BuildKernel() { touch lib/modules/$KernelVer/modules.builtin fi +%if %{efiuki} + popd + + KernelUnifiedImageDir="$RPM_BUILD_ROOT/lib/modules/$KernelVer" + KernelUnifiedImage="$KernelUnifiedImageDir/$InstallName-virt.efi" + + mkdir -p $KernelUnifiedImageDir + + dracut --conf=%{SOURCE86} \ + --confdir=$(mktemp -d) \ + --verbose \ + --kver "$KernelVer" \ + --kmoddir "$RPM_BUILD_ROOT/lib/modules/$KernelVer/" \ + --logfile=$(mktemp) \ + --uefi \ + --kernel-image $(realpath $KernelImage) \ + --kernel-cmdline 'console=tty0 console=ttyS0' \ + $KernelUnifiedImage + +%if %{signkernel} + + %pesign -s -i $KernelUnifiedImage -o $KernelUnifiedImage.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0} + %pesign -s -i $KernelUnifiedImage.tmp -o $KernelUnifiedImage.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1} + rm -f $KernelUnifiedImage.tmp + + if [ ! -s $KernelUnifiedImage.signed ]; then + echo "pesigning failed" + exit 1 + fi + mv $KernelUnifiedImage.signed $KernelUnifiedImage + +# signkernel +%endif + + pushd $RPM_BUILD_ROOT + +# efiuki +%endif + remove_depmod_files # Go back and find all of the various directories in the tree. We use this @@ -2873,12 +2950,14 @@ fi\ # It also defines a %%postun script that does the same thing. # %%kernel_modules_core_post [<subpackage>] # +# FIXME: /bin/kernel-install can't handle UKIs (yet), so cleanup depmod files in %postun for now. +# %define kernel_modules_core_post() \ %{expand:%%posttrans %{?1:%{1}-}modules-core}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules-core}\ -/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ +rm -f /lib/modules/%{KVERREL}%{?1:+%{1}}/modules.*\ %{nil} # This macro defines a %%posttrans script for a kernel package. @@ -2926,6 +3005,20 @@ mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\ touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?-v:+%{-v*}}\ %{nil} +# +# This macro defines scripts for a kernel*-uki-virt package +# +# FIXME: /bin/kernel-install can't handle UKIs (yet), so just cp/rm as temporary stop-gap +# +%define kernel_uki_virt_scripts() \ +%{expand:%%posttrans %{?1:%{1}-}uki-virt}\ +mkdir -p /boot/efi/EFI/Linux\ +cp /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz-virt.efi /boot/efi/EFI/Linux/vmlinuz-%{KVERREL}%{?1:+%{1}}-virt.efi\ +%{nil}\ +%{expand:%%postun %{?1:%{1}-}uki-virt}\ +rm -f /boot/efi/EFI/Linux/vmlinuz-%{KVERREL}%{?1:+%{1}}-virt.efi\ +%{nil} + # # This macro defines a %%preun script for a kernel package. # %%kernel_variant_preun <subpackage> @@ -2939,6 +3032,10 @@ then\ fi\ %{nil} +%if %{efiuki} +%kernel_uki_virt_scripts +%endif + %kernel_variant_preun %kernel_variant_post -r kernel-smp @@ -2948,6 +3045,9 @@ fi\ %endif %if %{with_debug} +%if %{efiuki} +%kernel_uki_virt_scripts debug +%endif %kernel_variant_preun debug %kernel_variant_post -v debug %endif @@ -3188,6 +3288,11 @@ fi %{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\ %endif\ %endif\ +%if %{efiuki}\ +%{expand:%%files %{?3:%{3}-}uki-virt}\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-virt.efi\ +%ghost /%{image_install_path}/efi/EFI/Linux/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}-virt.efi\ +%endif\ %if %{?3:1} %{!?3:0}\ %{expand:%%files %{3}}\ %endif\ -- https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2175

2 1

[OS-BUILD PATCHv2 0/2] Turn off forced debug builds
by Justin M. Forbes (via Email Bridge) 24 Jan '23

24 Jan '23

From: Justin M. Forbes on gitlab.com Merge Request: https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2263 For many years, rawhide kernels have forced users to run debug builds on git snapshots by not building a non debug kernel as an option. While this has served us well, in finding occasional bugs that are less likely to surface otherwise, the performance of debug kernels has gotten considerably worse over time. After evaluating the debug configs to see if performance could be improved, it has become clear that we would have to trade off too much to regain performance. We would be better served by leaving more debug options enabled and offering a non debug kernel for all users on all builds. Signed-off-by: Justin M. Forbes <jforbes(a)fedoraproject.org> --- redhat/scripts/genspec/genspec.sh | 13 +++++-------- redhat/kernel.spec.template | 4 ++-- 2 files changed, 7 insertions(+), 10 deletions(-)

1 2

[OS-BUILD PATCH] gitlab-ci: use CI templates from production branch
by Michael Hofmann (via Email Bridge) 24 Jan '23

24 Jan '23

From: Michael Hofmann <mhofmann(a)redhat.com> gitlab-ci: use CI templates from production branch The kernel_templates.yml file is pulled directly from pipeline-definition in the parent pipeline. While CKI can test new versions of the child pipelines via the cki-bot instrumentation, that is not possible for anything related to the parent pipeline. To at least make it possible to test-run changes before merging an MR in pipeline-definition, pull the kernel_templates.yml file from the production branch. This branch can be updated via a manual job from pipeline-definition MRs and easily rolled back without going through a full git revert cycle. Bugzilla: INTERNAL Upstream Status: RHEL-only Signed-off-by: Michael Hofmann <mhofmann(a)redhat.com> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index blahblah..blahblah 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -6,7 +6,7 @@ include: - project: cki-project/pipeline-definition - ref: main + ref: production file: kernel_templates.yml stages: -- https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2265

1 0

[OS-BUILD PATCHv5] redhat: Add sub-RPM with a EFI unified kernel image for virtual machines
by Vitaly Kuznetsov (via Email Bridge) 24 Jan '23

24 Jan '23

From: Vitaly Kuznetsov <vkuznets(a)redhat.com> redhat: Add sub-RPM with a EFI unified kernel image for virtual machines The new 'kernel-unified-virt' sub-RPM is added on x86_64 targets. This contains an EFI application that provides a combined vmlinux, initrd and cmdline, as a so called 'unified kernel image'. The spec for this is defined by the boot loader specification https://uapi-group.org/specifications/specs/boot_loader_specification/ The key benefit of a unified kernel is that its secure boot signature covers the initrd and cmdline contents, allowing a trustworthy measured boot process with attestation, which is not practical with locally generated initrds/cmdlines. Since the initrd is pre-generated its contents have to be very generic, to be usable on a wide variety of deployments. To make this problem tractable, the sub-RPM targets only usage in virtual machines. With such a restriction, the initrd only needs a very small set of block driver modules present, in order to be usable across KVM, Hyper-V and Xen hypervisors which will cover essentially all common public and private clouds. Similarly the kernel cmdline cannot contain any host specific data, which means the root filesystem to mount needs to be able to be automatically detected. A virtual machine image intending to use this unified kernel package thus needs to comply with the discoverable partitions specification: https://uapi-group.org/specifications/specs/discoverable_partitions_specifi… Based-on-patch-by: Daniel P. Berrangé <berrange(a)redhat.com> Based-on-patch-by: Gerd Hoffmann <kraxel(a)redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets(a)redhat.com> diff --git a/redhat/Makefile b/redhat/Makefile index blahblah..blahblah 100644 --- a/redhat/Makefile +++ b/redhat/Makefile @@ -639,6 +639,7 @@ sources-rh: $(TARBALL) generate-testpatch-tmp setup-source dist-configs-check ../Makefile.rhelver \ README.rst \ kernel-local \ + dracut-virt.conf \ $(SOURCES)/ @if [ "$(RELEASED_KERNEL)" -ne 0 ]; then \ cp keys/redhatsecureboot{301,501,ca5,ca1}.cer $(SOURCES)/; \ diff --git a/redhat/dracut-virt.conf b/redhat/dracut-virt.conf new file mode 100644 index blahblah..blahblah 100644 --- /dev/null +++ b/redhat/dracut-virt.conf @@ -0,0 +1,35 @@ +# generic + compressed please +hostonly="no" +compress="xz" + +# VMs can't update microcode anyway +early_microcode="no" + +# modules: basics +dracutmodules+=" base systemd systemd-initrd dracut-systemd dbus dbus-broker usrmount shutdown " + +# modules: storage support +dracutmodules+=" dm lvm rootfs-block fs-lib " + +# modules: tpm and crypto +dracutmodules+=" crypt crypt-loop tpm2-tss " + +# drivers: virtual buses, pci +drivers+=" virtio-pci virtio-mmio " # qemu-kvm +drivers+=" hv-vmbus pci-hyperv " # hyperv +drivers+=" xen-pcifront " # xen + +# drivers: storage +drivers+=" ahci nvme scsi-hd scsi-cd " # generic +drivers+=" virtio-blk virtio-scsi " # qemu-kvm +drivers+=" hv-storvsc " # hyperv +drivers+=" xen-blkfront " # xen + +# root encryption +drivers+=" dm_crypt " + +# filesystems +filesystems+=" vfat ext4 xfs overlay " + +# systemd-pcrphase +install_items+=" /lib/systemd/system/systemd-pcrphase-initrd.service /usr/lib/systemd/systemd-pcrphase /usr/lib/systemd/system/initrd.target.wants/systemd-pcrphase-initrd.service " diff --git a/redhat/kernel.spec.template b/redhat/kernel.spec.template index blahblah..blahblah 100755 --- a/redhat/kernel.spec.template +++ b/redhat/kernel.spec.template @@ -91,6 +91,12 @@ Summary: The Linux kernel %global zipmodules 1 %endif +%ifarch x86_64 +%global efiuki 1 +%else +%global efiuki 0 +%endif + %if %{zipmodules} %global zipsed -e 's/\.ko$/\.ko.xz/' %endif @@ -699,6 +705,21 @@ BuildRequires: llvm BuildRequires: lld %endif +%if %{efiuki} +BuildRequires: dracut +# For dracut UEFI uki binaries +BuildRequires: binutils +# For the initrd +BuildRequires: lvm2 +%if 0%{?fedora} > 37 +BuildRequires: systemd-boot-unsigned +%endif +# For systemd-stub and systemd-pcrphase +BuildRequires: systemd-udev >= 252-1 +# For TPM operations in UKI initramfs +BuildRequires: tpm2-tools +%endif + # Because this is the kernel, it's hard to get a single upstream URL # to represent the base without needing to do a bunch of patching. This # tarball is generated from a src-git tree. If you want to see the @@ -826,6 +847,8 @@ Source82: update_scripts.sh Source84: mod-internal.list Source85: mod-partner.list +Source86: dracut-virt.conf + Source100: rheldup3.x509 Source101: rhelkpatch1.x509 @@ -1331,6 +1354,13 @@ Requires: kernel-%{?1:%{1}-}-modules-core-uname-r = %{KVERREL}%{?1:+%{1}}\ %endif\ %{expand:%%kernel_debuginfo_package %{?1:%{1}}}\ %endif\ +%if %{efiuki}\ +%package %{?1:%{1}-}uki-virt\ +Summary: %{variant_summary} unified kernel image for virtual machines\ +Provides: installonlypkg(kernel)\ +Provides: kernel-%{?1:%{1}-}uname-r = %{KVERREL}%{?1:+%{1}}\ +Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{?1:+%{1}}\ +%endif\ %{nil} # @@ -1400,6 +1430,14 @@ Linux operating system. The kernel handles the basic functions of the operating system: memory allocation, process allocation, device input and output, etc. +%if %{efiuki} +%description debug-uki-virt +Prebuilt debug unified kernel image for virtual machines. + +%description uki-virt +Prebuilt default unified kernel image for virtual machines. +%endif + %if %{with_ipaclones} %kernel_ipaclones_package %endif @@ -2180,6 +2218,45 @@ BuildKernel() { touch lib/modules/$KernelVer/modules.builtin fi +%if %{efiuki} + popd + + KernelUnifiedImageDir="$RPM_BUILD_ROOT/lib/modules/$KernelVer" + KernelUnifiedImage="$KernelUnifiedImageDir/$InstallName-virt.efi" + + mkdir -p $KernelUnifiedImageDir + + dracut --conf=%{SOURCE86} \ + --confdir=$(mktemp -d) \ + --verbose \ + --kver "$KernelVer" \ + --kmoddir "$RPM_BUILD_ROOT/lib/modules/$KernelVer/" \ + --logfile=$(mktemp) \ + --uefi \ + --kernel-image $(realpath $KernelImage) \ + --kernel-cmdline 'console=tty0 console=ttyS0' \ + $KernelUnifiedImage + +%if %{signkernel} + + %pesign -s -i $KernelUnifiedImage -o $KernelUnifiedImage.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0} + %pesign -s -i $KernelUnifiedImage.tmp -o $KernelUnifiedImage.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1} + rm -f $KernelUnifiedImage.tmp + + if [ ! -s $KernelUnifiedImage.signed ]; then + echo "pesigning failed" + exit 1 + fi + mv $KernelUnifiedImage.signed $KernelUnifiedImage + +# signkernel +%endif + + pushd $RPM_BUILD_ROOT + +# efiuki +%endif + remove_depmod_files # Go back and find all of the various directories in the tree. We use this @@ -2873,12 +2950,14 @@ fi\ # It also defines a %%postun script that does the same thing. # %%kernel_modules_core_post [<subpackage>] # +# FIXME: /bin/kernel-install can't handle UKIs (yet), so cleanup depmod files in %postun for now. +# %define kernel_modules_core_post() \ %{expand:%%posttrans %{?1:%{1}-}modules-core}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules-core}\ -/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ +rm -f /lib/modules/%{KVERREL}%{?1:+%{1}}/modules.*\ %{nil} # This macro defines a %%posttrans script for a kernel package. @@ -2926,6 +3005,20 @@ mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\ touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?-v:+%{-v*}}\ %{nil} +# +# This macro defines scripts for a kernel*-uki-virt package +# +# FIXME: /bin/kernel-install can't handle UKIs (yet), so just cp/rm as temporary stop-gap +# +%define kernel_uki_virt_scripts() \ +%{expand:%%posttrans %{?1:%{1}-}uki-virt}\ +mkdir -p /boot/efi/EFI/Linux\ +cp /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz-virt.efi /boot/efi/EFI/Linux/vmlinuz-%{KVERREL}%{?1:+%{1}}-virt.efi\ +%{nil}\ +%{expand:%%postun %{?1:%{1}-}uki-virt}\ +rm -f /boot/efi/EFI/Linux/vmlinuz-%{KVERREL}%{?1:+%{1}}-virt.efi\ +%{nil} + # # This macro defines a %%preun script for a kernel package. # %%kernel_variant_preun <subpackage> @@ -2939,6 +3032,10 @@ then\ fi\ %{nil} +%if %{efiuki} +%kernel_uki_virt_scripts +%endif + %kernel_variant_preun %kernel_variant_post -r kernel-smp @@ -2948,6 +3045,9 @@ fi\ %endif %if %{with_debug} +%if %{efiuki} +%kernel_uki_virt_scripts debug +%endif %kernel_variant_preun debug %kernel_variant_post -v debug %endif @@ -3188,6 +3288,11 @@ fi %{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\ %endif\ %endif\ +%if %{efiuki}\ +%{expand:%%files %{?3:%{3}-}uki-virt}\ +/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-virt.efi\ +%ghost /%{image_install_path}/efi/EFI/Linux/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}-virt.efi\ +%endif\ %if %{?3:1} %{!?3:0}\ %{expand:%%files %{3}}\ %endif\ -- https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2175

3 3

[OS-BUILD PATCH] Turn off forced debug builds
by Justin M. Forbes (via Email Bridge) 24 Jan '23

24 Jan '23

From: Justin M. Forbes <jforbes(a)fedoraproject.org> Turn off forced debug builds For many years, rawhide kernels have forced users to run debug builds on git snapshots by not building a non debug kernel as an option. While this has served us well, in finding occasional bugs that are less likely to surface otherwise, the performance of debug kernels has gotten considerably worse over time. After evaluating the debug configs to see if performance could be improved, it has become clear that we would have to trade off too much to regain performance. We would be better served by leaving more debug options enabled and offering a non debug kernel for all users on all builds. Signed-off-by: Justin M. Forbes <jforbes(a)fedoraproject.org> diff --git a/redhat/scripts/genspec/genspec.sh b/redhat/scripts/genspec/genspec.sh index blahblah..blahblah 100755 --- a/redhat/scripts/genspec/genspec.sh +++ b/redhat/scripts/genspec/genspec.sh @@ -4,14 +4,11 @@ UPSTREAM=$(git rev-parse -q --verify origin/"${UPSTREAM_BRANCH}" || \ git rev-parse -q --verify "${UPSTREAM_BRANCH}") -if [ "$SNAPSHOT" = 0 ]; then - # This is based off a tag on Linus's tree (e.g. v5.5 or v5.5-rc5). - # Two kernels are built, one with debug configuration and one without. - SPECDEBUG_BUILDS_ENABLED=1 -else - # All kernels are built with debug configurations. - SPECDEBUG_BUILDS_ENABLED=0 -fi +# As debug kernels have gotten a bit slower over time, the forced debug +# builds are going unused. We are no longer forcing debug builds only. +# Keep the option around for one off scratch builds though. +# Two kernels are built, one with debug configuration and one without. +SPECDEBUG_BUILDS_ENABLED=1 if [ -n "$DISTLOCALVERSION" ]; then SPECBUILDID=$(printf "%%define buildid %s" "$DISTLOCALVERSION") -- https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2263

1 0

[OS-BUILD PATCHv9 0/5] makefile: Add -Werror support for RHEL
by Prarit Bhargava (via Email Bridge) 23 Jan '23

23 Jan '23

From: Prarit Bhargava on gitlab.com Merge Request: https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2240 The -Werror flag should be enabled for RHEL. In ARK, however, it is a bit tricky to enable -Werror as a build bug occasionally leaks through upstream review and into Linus' tree, and the toolchain is rebased which causes many new errors to be reported. As a consequence, -Werror cannot be enabled in ARK but the code to enable it for RHEL can be added to the top-level makefile. Additional fixes: Alphabetize Makefile.variables (something I've wanted to do for a while now) and remove a mention of Makefile.rhkpg. Signed-off-by: Prarit Bhargava <prarit(a)redhat.com> --- redhat/configs/build_configs.sh | 5 + redhat/self-test/data/centos-2585cf9dfaad.el7 | 1 + redhat/self-test/data/centos-2585cf9dfaad.fc25 | 1 + redhat/self-test/data/centos-78e36f3b0dae.el7 | 1 + redhat/self-test/data/centos-78e36f3b0dae.fc25 | 1 + redhat/self-test/data/centos-df0cc57e057f.el7 | 1 + redhat/self-test/data/centos-df0cc57e057f.fc25 | 1 + redhat/self-test/data/centos-fce15c45d3fb.el7 | 1 + redhat/self-test/data/centos-fce15c45d3fb.fc25 | 1 + redhat/self-test/data/fedora-2585cf9dfaad.el7 | 1 + redhat/self-test/data/fedora-2585cf9dfaad.fc25 | 1 + redhat/self-test/data/fedora-78e36f3b0dae.el7 | 1 + redhat/self-test/data/fedora-78e36f3b0dae.fc25 | 1 + redhat/self-test/data/fedora-df0cc57e057f.el7 | 1 + redhat/self-test/data/fedora-df0cc57e057f.fc25 | 1 + redhat/self-test/data/fedora-fce15c45d3fb.el7 | 1 + redhat/self-test/data/fedora-fce15c45d3fb.fc25 | 1 + redhat/self-test/data/rhel-2585cf9dfaad.el7 | 1 + redhat/self-test/data/rhel-2585cf9dfaad.fc25 | 1 + redhat/self-test/data/rhel-78e36f3b0dae.el7 | 1 + redhat/self-test/data/rhel-78e36f3b0dae.fc25 | 1 + redhat/self-test/data/rhel-df0cc57e057f.el7 | 1 + redhat/self-test/data/rhel-df0cc57e057f.fc25 | 1 + redhat/self-test/data/rhel-fce15c45d3fb.el7 | 1 + redhat/self-test/data/rhel-fce15c45d3fb.fc25 | 1 + redhat/Makefile.variables | 184 ++++++++++++------------ makefile | 7 + 27 files changed, 129 insertions(+), 91 deletions(-)

1 6

[OS-BUILD PATCHv8 0/4] makefile: Add -Werror support for RHEL
by Prarit Bhargava (via Email Bridge) 23 Jan '23

23 Jan '23

From: Prarit Bhargava on gitlab.com Merge Request: https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2240 The -Werror flag should be enabled for RHEL. In ARK, however, it is a bit tricky to enable -Werror as a build bug occasionally leaks through upstream review and into Linus' tree, and the toolchain is rebased which causes many new errors to be reported. As a consequence, -Werror cannot be enabled in ARK but the code to enable it for RHEL can be added to the top-level makefile. Additional fixes: Alphabetize Makefile.variables (something I've wanted to do for a while now) and remove a mention of Makefile.rhkpg. Signed-off-by: Prarit Bhargava <prarit(a)redhat.com> --- redhat/configs/build_configs.sh | 5 + redhat/Makefile.variables | 184 ++++++++++++++++++++------------------- makefile | 7 + 3 files changed, 105 insertions(+), 91 deletions(-)

3 6

[OS-BUILD PATCH 0/4] rpm builds: Fix warnings and output
by Prarit Bhargava (via Email Bridge) 23 Jan '23

23 Jan '23

From: Prarit Bhargava on gitlab.com Merge Request: https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2255 There are several groups of warnings and output that should be fixed in the kernel's rpm build commands. 1) The output of pathfix.py is too noisy. Users do not need to see the directory traversal messages, and only need to see files that were changed (or not changed) by the script. 2) There is a vmlinux_decompressor error in !s390x builds. This code must only be executed on s390x builds. 3) There are references to an old .tmp_versions directory that is no longer used in the build. These references can be removed entirely from the tree. 4) There are "File listed twice" rpm build errors that occur because the rpm spec's kernel-modules-internal section %files section lists them twice. Of course, they should only be listed once. The four commits in this series fix the above four issues. Test build: https://koji.fedoraproject.org/koji/taskinfo?taskID=96528106 Signed-off-by: Prarit Bhargava <prarit(a)redhat.com> --- redhat/scripts/mod/mod-denylist.sh | 11 ----------- redhat/kernel.spec.template | 27 +++++++++++---------------- 2 files changed, 11 insertions(+), 27 deletions(-)

2 6

[OS-BUILD PATCHv2 0/4] rpm builds: Fix warnings and output
by Prarit Bhargava (via Email Bridge) 23 Jan '23

23 Jan '23

From: Prarit Bhargava on gitlab.com Merge Request: https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2255 There are several groups of warnings and output that should be fixed in the kernel's rpm build commands. 1) The output of pathfix.py is too noisy. Users do not need to see the directory traversal messages, and only need to see files that were changed (or not changed) by the script. 2) There is a vmlinux_decompressor error in !s390x builds. This code must only be executed on s390x builds. 3) There are references to an old .tmp_versions directory that is no longer used in the build. These references can be removed entirely from the tree. 4) There are "File listed twice" rpm build errors that occur because the rpm spec's kernel-modules-internal section %files section lists them twice. Of course, they should only be listed once. The four commits in this series fix the above four issues. Test build: https://koji.fedoraproject.org/koji/taskinfo?taskID=96528106 Signed-off-by: Prarit Bhargava <prarit(a)redhat.com> --- redhat/scripts/mod/mod-denylist.sh | 11 ----------- redhat/kernel.spec.template | 27 ++++++++++----------------- 2 files changed, 10 insertions(+), 28 deletions(-)

1 4

[OS-BUILD PATCHv7] redhat/kernel.spec.template: Parallelize compression
by Prarit Bhargava (via Email Bridge) 23 Jan '23

23 Jan '23

From: Prarit Bhargava <prarit(a)redhat.com> redhat/kernel.spec.template: Parallelize compression This line in the kernel.spec file: find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; implies that ${RPM_BUILD_NCPUS} xz instances are run. This is not true, and this line actually applies ${RPM_BUILD_NCPUS} to a single instance of xz. This means that the compression has been done one module at a time (ie, in serial) rather than in parallel as is implied by the code. Use xarg's -n option to assign 16 cpus per process and parallelize the compression. Suggested-by: "Herton R. Krzesinski" <herton(a)redhat.com> Signed-off-by: Prarit Bhargava <prarit(a)redhat.com> diff --git a/redhat/kernel.spec.template b/redhat/kernel.spec.template index blahblah..blahblah 100755 --- a/redhat/kernel.spec.template +++ b/redhat/kernel.spec.template @@ -2472,7 +2472,8 @@ find Documentation -type d | xargs chmod u+w fi \ fi \ if [ "%{zipmodules}" -eq "1" ]; then \ - find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \ + echo "Compressing kernel modules ..." \ + find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -n 16 -P${RPM_BUILD_NCPUS} -r xz; \ fi \ %{nil} -- https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2254

1 0

[OS-BUILD PATCHv6] redhat/kernel.spec.template: Parallelize compression
by Prarit Bhargava (via Email Bridge) 23 Jan '23

23 Jan '23

From: Prarit Bhargava <prarit(a)redhat.com> redhat/kernel.spec.template: Parallelize compression This line in the kernel.spec file: find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; implies that ${RPM_BUILD_NCPUS} xz instances are run. This is not true, and this line actually applies ${RPM_BUILD_NCPUS} to a single instance of xz. This means that the compression has been done one module at a time (ie, in serial) rather than in parallel as is implied by the code. Use xarg's -n option to assign 16 cpus per process and parallelize the compression. Suggested-by: "Herton R. Krzesinski" <herton(a)redhat.com> Signed-off-by: Prarit Bhargava <prarit(a)redhat.com> diff --git a/redhat/kernel.spec.template b/redhat/kernel.spec.template index blahblah..blahblah 100755 --- a/redhat/kernel.spec.template +++ b/redhat/kernel.spec.template @@ -2472,7 +2472,8 @@ find Documentation -type d | xargs chmod u+w fi \ fi \ if [ "%{zipmodules}" -eq "1" ]; then \ - find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \ + echo "Compressing kernel modules ..." \ + find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -n 1 -P${RPM_BUILD_NCPUS} -r xz; \ fi \ %{nil} -- https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2254

2 2

[OS-BUILD PATCH] redhat/self-test/data: Regenerate self-test data for make change
by Prarit Bhargava (via Email Bridge) 23 Jan '23

23 Jan '23

From: Prarit Bhargava <prarit(a)redhat.com> redhat/self-test/data: Regenerate self-test data for make change make 4.4 has dropped the -w flag by default. This affects the MAKEFLAGS variable in the kernel and the self-test data has to be regenerated. Regenerate the self-test data. Signed-off-by: Prarit Bhargava <prarit(a)redhat.com> diff --git a/redhat/self-test/data/centos-2585cf9dfaad.el7 b/redhat/self-test/data/centos-2585cf9dfaad.el7 index blahblah..blahblah 100644 --- a/redhat/self-test/data/centos-2585cf9dfaad.el7 +++ b/redhat/self-test/data/centos-2585cf9dfaad.el7 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=2585cf9dfaad DISTRO=centos DIST=.el7 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=2585cf9dfaad DISTRO=centos DIST=.el7 RHSELFTESTDATA=1 MARKER=v5.16-rc5 MERGE_BASE=2585cf9dfaaddf00b069673f27bb3f8530e2039c NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/centos-2585cf9dfaad.fc25 b/redhat/self-test/data/centos-2585cf9dfaad.fc25 index blahblah..blahblah 100644 --- a/redhat/self-test/data/centos-2585cf9dfaad.fc25 +++ b/redhat/self-test/data/centos-2585cf9dfaad.fc25 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=2585cf9dfaad DISTRO=centos DIST=.fc25 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=2585cf9dfaad DISTRO=centos DIST=.fc25 RHSELFTESTDATA=1 MARKER=v5.16-rc5 MERGE_BASE=2585cf9dfaaddf00b069673f27bb3f8530e2039c NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/centos-78e36f3b0dae.el7 b/redhat/self-test/data/centos-78e36f3b0dae.el7 index blahblah..blahblah 100644 --- a/redhat/self-test/data/centos-78e36f3b0dae.el7 +++ b/redhat/self-test/data/centos-78e36f3b0dae.el7 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=78e36f3b0dae DISTRO=centos DIST=.el7 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=78e36f3b0dae DISTRO=centos DIST=.el7 RHSELFTESTDATA=1 MARKER=78e36f3b0dae MERGE_BASE=78e36f3b0dae586f623c4a37ec5eb5496f5abbe1 NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/centos-78e36f3b0dae.fc25 b/redhat/self-test/data/centos-78e36f3b0dae.fc25 index blahblah..blahblah 100644 --- a/redhat/self-test/data/centos-78e36f3b0dae.fc25 +++ b/redhat/self-test/data/centos-78e36f3b0dae.fc25 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=78e36f3b0dae DISTRO=centos DIST=.fc25 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=78e36f3b0dae DISTRO=centos DIST=.fc25 RHSELFTESTDATA=1 MARKER=78e36f3b0dae MERGE_BASE=78e36f3b0dae586f623c4a37ec5eb5496f5abbe1 NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/centos-df0cc57e057f.el7 b/redhat/self-test/data/centos-df0cc57e057f.el7 index blahblah..blahblah 100644 --- a/redhat/self-test/data/centos-df0cc57e057f.el7 +++ b/redhat/self-test/data/centos-df0cc57e057f.el7 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=df0cc57e057f DISTRO=centos DIST=.el7 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=df0cc57e057f DISTRO=centos DIST=.el7 RHSELFTESTDATA=1 MARKER=v5.16 MERGE_BASE=df0cc57e057f18e44dac8e6c18aba47ab53202f9 NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/centos-df0cc57e057f.fc25 b/redhat/self-test/data/centos-df0cc57e057f.fc25 index blahblah..blahblah 100644 --- a/redhat/self-test/data/centos-df0cc57e057f.fc25 +++ b/redhat/self-test/data/centos-df0cc57e057f.fc25 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=df0cc57e057f DISTRO=centos DIST=.fc25 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=df0cc57e057f DISTRO=centos DIST=.fc25 RHSELFTESTDATA=1 MARKER=v5.16 MERGE_BASE=df0cc57e057f18e44dac8e6c18aba47ab53202f9 NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/centos-fce15c45d3fb.el7 b/redhat/self-test/data/centos-fce15c45d3fb.el7 index blahblah..blahblah 100644 --- a/redhat/self-test/data/centos-fce15c45d3fb.el7 +++ b/redhat/self-test/data/centos-fce15c45d3fb.el7 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=fce15c45d3fb DISTRO=centos DIST=.el7 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=fce15c45d3fb DISTRO=centos DIST=.el7 RHSELFTESTDATA=1 MARKER=fce15c45d3fb MERGE_BASE=fce15c45d3fbd9fc1feaaf3210d8e3f8b33dfd3a NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/centos-fce15c45d3fb.fc25 b/redhat/self-test/data/centos-fce15c45d3fb.fc25 index blahblah..blahblah 100644 --- a/redhat/self-test/data/centos-fce15c45d3fb.fc25 +++ b/redhat/self-test/data/centos-fce15c45d3fb.fc25 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=fce15c45d3fb DISTRO=centos DIST=.fc25 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=fce15c45d3fb DISTRO=centos DIST=.fc25 RHSELFTESTDATA=1 MARKER=fce15c45d3fb MERGE_BASE=fce15c45d3fbd9fc1feaaf3210d8e3f8b33dfd3a NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/fedora-2585cf9dfaad.el7 b/redhat/self-test/data/fedora-2585cf9dfaad.el7 index blahblah..blahblah 100644 --- a/redhat/self-test/data/fedora-2585cf9dfaad.el7 +++ b/redhat/self-test/data/fedora-2585cf9dfaad.el7 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=2585cf9dfaad DISTRO=fedora DIST=.el7 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=2585cf9dfaad DISTRO=fedora DIST=.el7 RHSELFTESTDATA=1 MARKER=v5.16-rc5 MERGE_BASE=2585cf9dfaaddf00b069673f27bb3f8530e2039c NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/fedora-2585cf9dfaad.fc25 b/redhat/self-test/data/fedora-2585cf9dfaad.fc25 index blahblah..blahblah 100644 --- a/redhat/self-test/data/fedora-2585cf9dfaad.fc25 +++ b/redhat/self-test/data/fedora-2585cf9dfaad.fc25 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=2585cf9dfaad DISTRO=fedora DIST=.fc25 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=2585cf9dfaad DISTRO=fedora DIST=.fc25 RHSELFTESTDATA=1 MARKER=v5.16-rc5 MERGE_BASE=2585cf9dfaaddf00b069673f27bb3f8530e2039c NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/fedora-78e36f3b0dae.el7 b/redhat/self-test/data/fedora-78e36f3b0dae.el7 index blahblah..blahblah 100644 --- a/redhat/self-test/data/fedora-78e36f3b0dae.el7 +++ b/redhat/self-test/data/fedora-78e36f3b0dae.el7 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=78e36f3b0dae DISTRO=fedora DIST=.el7 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=78e36f3b0dae DISTRO=fedora DIST=.el7 RHSELFTESTDATA=1 MARKER=78e36f3b0dae MERGE_BASE=78e36f3b0dae586f623c4a37ec5eb5496f5abbe1 NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/fedora-78e36f3b0dae.fc25 b/redhat/self-test/data/fedora-78e36f3b0dae.fc25 index blahblah..blahblah 100644 --- a/redhat/self-test/data/fedora-78e36f3b0dae.fc25 +++ b/redhat/self-test/data/fedora-78e36f3b0dae.fc25 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=78e36f3b0dae DISTRO=fedora DIST=.fc25 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=78e36f3b0dae DISTRO=fedora DIST=.fc25 RHSELFTESTDATA=1 MARKER=78e36f3b0dae MERGE_BASE=78e36f3b0dae586f623c4a37ec5eb5496f5abbe1 NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/fedora-df0cc57e057f.el7 b/redhat/self-test/data/fedora-df0cc57e057f.el7 index blahblah..blahblah 100644 --- a/redhat/self-test/data/fedora-df0cc57e057f.el7 +++ b/redhat/self-test/data/fedora-df0cc57e057f.el7 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=df0cc57e057f DISTRO=fedora DIST=.el7 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=df0cc57e057f DISTRO=fedora DIST=.el7 RHSELFTESTDATA=1 MARKER=v5.16 MERGE_BASE=df0cc57e057f18e44dac8e6c18aba47ab53202f9 NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/fedora-df0cc57e057f.fc25 b/redhat/self-test/data/fedora-df0cc57e057f.fc25 index blahblah..blahblah 100644 --- a/redhat/self-test/data/fedora-df0cc57e057f.fc25 +++ b/redhat/self-test/data/fedora-df0cc57e057f.fc25 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=df0cc57e057f DISTRO=fedora DIST=.fc25 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=df0cc57e057f DISTRO=fedora DIST=.fc25 RHSELFTESTDATA=1 MARKER=v5.16 MERGE_BASE=df0cc57e057f18e44dac8e6c18aba47ab53202f9 NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/fedora-fce15c45d3fb.el7 b/redhat/self-test/data/fedora-fce15c45d3fb.el7 index blahblah..blahblah 100644 --- a/redhat/self-test/data/fedora-fce15c45d3fb.el7 +++ b/redhat/self-test/data/fedora-fce15c45d3fb.el7 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=fce15c45d3fb DISTRO=fedora DIST=.el7 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=fce15c45d3fb DISTRO=fedora DIST=.el7 RHSELFTESTDATA=1 MARKER=fce15c45d3fb MERGE_BASE=fce15c45d3fbd9fc1feaaf3210d8e3f8b33dfd3a NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/fedora-fce15c45d3fb.fc25 b/redhat/self-test/data/fedora-fce15c45d3fb.fc25 index blahblah..blahblah 100644 --- a/redhat/self-test/data/fedora-fce15c45d3fb.fc25 +++ b/redhat/self-test/data/fedora-fce15c45d3fb.fc25 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=fce15c45d3fb DISTRO=fedora DIST=.fc25 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=fce15c45d3fb DISTRO=fedora DIST=.fc25 RHSELFTESTDATA=1 MARKER=fce15c45d3fb MERGE_BASE=fce15c45d3fbd9fc1feaaf3210d8e3f8b33dfd3a NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/rhel-2585cf9dfaad.el7 b/redhat/self-test/data/rhel-2585cf9dfaad.el7 index blahblah..blahblah 100644 --- a/redhat/self-test/data/rhel-2585cf9dfaad.el7 +++ b/redhat/self-test/data/rhel-2585cf9dfaad.el7 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=2585cf9dfaad DISTRO=rhel DIST=.el7 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=2585cf9dfaad DISTRO=rhel DIST=.el7 RHSELFTESTDATA=1 MARKER=v5.16-rc5 MERGE_BASE=2585cf9dfaaddf00b069673f27bb3f8530e2039c NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/rhel-2585cf9dfaad.fc25 b/redhat/self-test/data/rhel-2585cf9dfaad.fc25 index blahblah..blahblah 100644 --- a/redhat/self-test/data/rhel-2585cf9dfaad.fc25 +++ b/redhat/self-test/data/rhel-2585cf9dfaad.fc25 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=2585cf9dfaad DISTRO=rhel DIST=.fc25 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=2585cf9dfaad DISTRO=rhel DIST=.fc25 RHSELFTESTDATA=1 MARKER=v5.16-rc5 MERGE_BASE=2585cf9dfaaddf00b069673f27bb3f8530e2039c NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/rhel-78e36f3b0dae.el7 b/redhat/self-test/data/rhel-78e36f3b0dae.el7 index blahblah..blahblah 100644 --- a/redhat/self-test/data/rhel-78e36f3b0dae.el7 +++ b/redhat/self-test/data/rhel-78e36f3b0dae.el7 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=78e36f3b0dae DISTRO=rhel DIST=.el7 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=78e36f3b0dae DISTRO=rhel DIST=.el7 RHSELFTESTDATA=1 MARKER=78e36f3b0dae MERGE_BASE=78e36f3b0dae586f623c4a37ec5eb5496f5abbe1 NO_CONFIGCHECKS= diff --git a/redhat/self-test/data/rhel-78e36f3b0dae.fc25 b/redhat/self-test/data/rhel-78e36f3b0dae.fc25 index blahblah..blahblah 100644 --- a/redhat/self-test/data/rhel-78e36f3b0dae.fc25 +++ b/redhat/self-test/data/rhel-78e36f3b0dae.fc25 @@ -38,7 +38,7 @@ LANG=C LOCVERFILE=../localversion MACH=x86_64 MAKEFILE_LIST=Makefile Makefile.variables ../Makefile.rhelver Makefile.cross -MAKEFLAGS=w -- HEAD=78e36f3b0dae DISTRO=rhel DIST=.fc25 RHSELFTESTDATA=1 +MAKEFLAGS= -- HEAD=78e36f3b0dae DISTRO=rhel DIST=.fc25 RHSELFTESTDATA=1 MARKER=78e36f3b0dae MERGE_BASE=78e36f3b0dae586f623c4a37ec5eb5496f5abbe1 NO_CONFIGCHECKS= -- https://gitlab.com/cki-project/kernel-ark/-/merge_requests/2261

1 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

kernel January 2023