Re: failed to build kernel from kernel-4.2.0-0.rc3.git3.1.fc23.src.rpm

[Lance Lassetter]

On July 26, 2015 9:37:24 AM CDT, Masami Ichikawa <masami256(a)gmail.com&gt; wrote:
> On Sun, Jul 26, 2015 at 11:06 PM, Josh Boyer
> <jwboyer(a)fedoraproject.org&gt; wrote:
> > On Sun, Jul 26, 2015 at 9:39 AM, Masami Ichikawa
> <masami256(a)gmail.com&gt; wrote:
> >> Hi,
> >>
> >> I  tried to rebuild kernel from
> kernel-4.2.0-0.rc3.git3.1.fc23.src.rpm
> >> but I got following error.
> >>
> >> Applying: lib/cpumask: Make CPUMASK_OFFSTACK usable without debug
> dependency
> >> Applying: amd-xgbe-a0: Add support for XGBE on A0
> >> Applying: amd-xgbe-phy-a0: Add support for XGBE PHY on A0
> >> Applying: arm64: avoid needing console= to enable serial console
> >> Applying: usb: make xhci platform driver use 64 bit or 32 bit DMA
> >> Applying: arm64: acpi drop expert patch
> >> Applying: ARM: tegra: usb no reset
> >> error: drivers/usb/core/hub.c: does not exist in index
> >> Patch failed at 0007 ARM: tegra: usb no reset
> >> The copy of the patch that failed is found in:
> >>   
> /home/masami/rpmbuild/BUILD/kernel-4.1.fc23/linux-4.2.0-0.rc3.git3.1.fc23.x86_64/.git/rebase-apply/patch
> >> When you have resolved this problem, run "git am --continue".
> >> If you prefer to skip this patch, run "git am --skip" instead.
> >> To restore the original branch and stop patching, run "git am
> --abort".
> >> error: Bad exit status from /var/tmp/rpm-tmp.yWoA78 (%prep)
> >>
> >> Failed patch is this.
> >>
> >> masami@f23-test:~$ cat
> >>
> rpmbuild/BUILD/kernel-4.1.fc23/linux-4.2.0-0.rc3.git3.1.fc23.x86_64/.git/rebase-apply/patch
> >> ---
> >>  drivers/usb/core/hub.c | 7 +++++++
> >>  1 file changed, 7 insertions(+)
> >>
> >> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> >> index 43cb2f2e3b43..7f838ec11c81 100644
> >> --- a/drivers/usb/core/hub.c
> >> +++ b/drivers/usb/core/hub.c
> >> @@ -4996,6 +4996,13 @@ static void hub_event(struct work_struct
> *work)
> >>                         (u16) hub->change_bits[0],
> >>                         (u16) hub->event_bits[0]);
> >>
> >> +       /* Don't disconnect USB-SATA on TrimSlice */
> >> +       if (strcmp(dev_name(hdev->bus->controller),
> "tegra-ehci.0")
> == 0) {
> >> +               if ((hdev->state == 7) && (hub->change_bits[0] ==
> 0)
> &&
> >> +                               (hub->event_bits[0] == 0x2))
> >> +                       hub->event_bits[0] = 0;
> >> +       }
> >> +
> >>         /* Lock the device, then check to see if we were
> >>          * disconnected while waiting for the lock to succeed. */
> >>         usb_lock_device(hdev);
> >>
> >> any idea?
> >>
> >> I did following command to rebuild on fedora 23(x86_64) environment.
> >> rpmbuild -bp --target=$(uname -m) kernel.spec
> >
> > We'd likely need to see the whole log.  Also, why are you rebuilding
> > something that is already built on koji?  Normally that is done if
> > someone makes modifications, so I'm curious if you have done so.
> >
> I paste whole log in the bottom of this mail.
> The reason I tried to rebuild is, I wanted to know how fedora kernel
> is built. Usually, when I modify kernel, I use upstream kernel and did
> make bzImage, make modules steps.  So that is the reason I tried to
> rebuild.
>
> > josh
>
>
> masami@f23-test:~/rpmbuild/SPECS$ rpmbuild -bp --target=$(uname -m)
> kernel.spec  2>&1 | tee ~/f23_build.log
> Building target platforms: x86_64
> Building for target x86_64
> Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.4LpL3H
> + umask 022
> + cd /home/masami/rpmbuild/BUILD
> + patch_command='patch -p1 -F1 -s'
> ++ find /home/masami/rpmbuild/BUILD -maxdepth 1 -type d -name
> 'kernel-4.*'
> ++ grep -x -v /home/masami/rpmbuild/BUILD/kernel-4.1.fc23
> + sharedirs=
> + :
> + '[' -d kernel-4.1.fc23 ']'
> + cd kernel-4.1.fc23
> + for i in 'linux-*'
> + '[' -d linux-4.2.0-0.rc3.git3.1.fc23.x86_64 ']'
> + rm -rf deleteme.x86_64
> + mv linux-4.2.0-0.rc3.git3.1.fc23.x86_64
> deleteme-linux-4.2.0-0.rc3.git3.1.fc23.x86_64
> + cd ..
> + '[' '!' -d kernel-4.1.fc23/vanilla-4.2-rc3-git3 ']'
> + cd kernel-4.1.fc23
> + cp -al vanilla-4.2-rc3-git3 linux-4.2.0-0.rc3.git3.1.fc23.x86_64
> + rm -rf deleteme-linux-4.2.0-0.rc3.git3.1.fc23.x86_64
> + cd linux-4.2.0-0.rc3.git3.1.fc23.x86_64
> + cp /home/masami/rpmbuild/SOURCES/config-arm-generic
> /home/masami/rpmbuild/SOURCES/config-arm64
> /home/masami/rpmbuild/SOURCES/config-armv7
> /home/masami/rpmbuild/SOURCES/config-armv7-generic
> /home/masami/rpmbuild/SOURCES/config-armv7-lpae
> /home/masami/rpmbuild/SOURCES/config-debug
> /home/masami/rpmbuild/SOURCES/config-generic
> /home/masami/rpmbuild/SOURCES/config-i686-PAE
> /home/masami/rpmbuild/SOURCES/config-local
> /home/masami/rpmbuild/SOURCES/config-no-extra
> /home/masami/rpmbuild/SOURCES/config-nodebug
> /home/masami/rpmbuild/SOURCES/config-powerpc64
> /home/masami/rpmbuild/SOURCES/config-powerpc64-generic
> /home/masami/rpmbuild/SOURCES/config-powerpc64le
> /home/masami/rpmbuild/SOURCES/config-powerpc64p7
> /home/masami/rpmbuild/SOURCES/config-s390x
> /home/masami/rpmbuild/SOURCES/config-x86-32-generic
> /home/masami/rpmbuild/SOURCES/config-x86-generic
> /home/masami/rpmbuild/SOURCES/config-x86_64-generic .
> + cp /home/masami/rpmbuild/SOURCES/merge.pl .
> + make -f /home/masami/rpmbuild/SOURCES/Makefile.config VERSION=4.2.0
> configs
> perl merge.pl config-x86-32-generic config-x86-generic  > temp-x86-32
> cat config-generic config-nodebug > temp-generic
> perl merge.pl temp-x86-32 temp-generic  > temp-x86-32-generic
> perl merge.pl /dev/null temp-x86-32-generic i386 >
> kernel-4.2.0-i686.config
> cat config-generic config-debug > temp-debug-generic
> perl merge.pl temp-x86-32 temp-debug-generic  > temp-x86-debug-generic
> perl merge.pl /dev/null temp-x86-debug-generic i386 >
> kernel-4.2.0-i686-debug.config
> perl merge.pl config-i686-PAE temp-x86-32-generic i386 >
> kernel-4.2.0-i686-PAE.config
> perl merge.pl config-i686-PAE temp-x86-debug-generic i386 >
> kernel-4.2.0-i686-PAEdebug.config
> perl merge.pl config-x86_64-generic config-x86-generic  > temp-x86-64
> perl merge.pl temp-x86-64 temp-generic  > temp-x86_64-generic
> perl merge.pl /dev/null temp-x86_64-generic x86_64 >
> kernel-4.2.0-x86_64.config
> perl merge.pl temp-x86-64 temp-debug-generic  >
> temp-x86_64-debug-generic
> perl merge.pl /dev/null temp-x86_64-debug-generic x86_64 >
> kernel-4.2.0-x86_64-debug.config
> perl merge.pl config-s390x temp-generic > temp-s390-generic
> perl merge.pl config-s390x temp-s390-generic s390 >
> kernel-4.2.0-s390x.config
> perl merge.pl config-no-extra temp-generic > temp-no-extra-generic
> perl merge.pl config-arm-generic temp-no-extra-generic >
> temp-arm-generic
> perl merge.pl config-armv7-generic temp-arm-generic >
> temp-armv7-generic
> perl merge.pl config-armv7 temp-armv7-generic > temp-armv7
> perl merge.pl /dev/null temp-armv7 arm > kernel-4.2.0-armv7hl.config
> perl merge.pl config-armv7-lpae temp-armv7-generic > temp-armv7-lpae
> perl merge.pl /dev/null temp-armv7-lpae arm >
> kernel-4.2.0-armv7hl-lpae.config
> perl merge.pl config-arm64 temp-arm-generic > temp-arm64
> perl merge.pl /dev/null temp-arm64 arm64 > kernel-4.2.0-aarch64.config
> perl merge.pl config-powerpc64-generic temp-generic  >
> temp-powerpc64-generic
> perl merge.pl config-powerpc64 temp-powerpc64-generic powerpc >
> kernel-4.2.0-ppc64.config
> perl merge.pl config-powerpc64p7 temp-powerpc64-generic powerpc >
> kernel-4.2.0-ppc64p7.config
> perl merge.pl config-powerpc64-generic temp-debug-generic  >
> temp-powerpc64-debug-generic
> perl merge.pl config-powerpc64 temp-powerpc64-debug-generic powerpc >
> kernel-4.2.0-ppc64-debug.config
> perl merge.pl config-powerpc64le temp-powerpc64-generic powerpc >
> kernel-4.2.0-ppc64le.config
> perl merge.pl config-powerpc64le temp-powerpc64-debug-generic powerpc
> > kernel-4.2.0-ppc64le-debug.config
> + for i in 'kernel-4.2.0-x86_64*.config'
> + mv kernel-4.2.0-x86_64-debug.config
> kernel-4.2.0-x86_64-debug.config.tmp
> + ./merge.pl /home/masami/rpmbuild/SOURCES/config-local
> kernel-4.2.0-x86_64-debug.config.tmp
> + rm kernel-4.2.0-x86_64-debug.config.tmp
> + for i in 'kernel-4.2.0-x86_64*.config'
> + mv kernel-4.2.0-x86_64.config kernel-4.2.0-x86_64.config.tmp
> + ./merge.pl /home/masami/rpmbuild/SOURCES/config-local
> kernel-4.2.0-x86_64.config.tmp
> + rm kernel-4.2.0-x86_64.config.tmp
> + git am /home/masami/rpmbuild/SOURCES/kbuild-AFTER_LINK.patch
> Applying: kbuild: AFTER_LINK
> + git am
> /home/masami/rpmbuild/SOURCES/lib-cpumask-Make-CPUMASK_OFFSTACK-usable-without-deb.patch
> /home/masami/rpmbuild/SOURCES/amd-xgbe-a0-Add-support-for-XGBE-on-A0.patch
> /home/masami/rpmbuild/SOURCES/amd-xgbe-phy-a0-Add-support-for-XGBE-PHY-on-A0.patch
> /home/masami/rpmbuild/SOURCES/arm64-avoid-needing-console-to-enable-serial-console.patch
> /home/masami/rpmbuild/SOURCES/usb-make-xhci-platform-driver-use-64-bit-or-32-bit-D.patch
> /home/masami/rpmbuild/SOURCES/arm64-acpi-drop-expert-patch.patch
> /home/masami/rpmbuild/SOURCES/ARM-tegra-usb-no-reset.patch
> /home/masami/rpmbuild/SOURCES/arm-i.MX6-Utilite-device-dtb.patch
> /home/masami/rpmbuild/SOURCES/Revert-Revert-ACPI-video-change-acpi-video-brightnes.patch
> /home/masami/rpmbuild/SOURCES/input-kill-stupid-messages.patch
> /home/masami/rpmbuild/SOURCES/die-floppy-die.patch
> /home/masami/rpmbuild/SOURCES/no-pcspkr-modalias.patch
> /home/masami/rpmbuild/SOURCES/input-silence-i8042-noise.patch
> /home/masami/rpmbuild/SOURCES/silence-fbcon-logo.patch
> /home/masami/rpmbuild/SOURCES/Kbuild-Add-an-option-to-enable-GCC-VTA.patch
> /home/masami/rpmbuild/SOURCES/crash-driver.patch
> /home/masami/rpmbuild/SOURCES/Add-secure_modules-call.patch
> /home/masami/rpmbuild/SOURCES/PCI-Lock-down-BAR-access-when-module-security-is-ena.patch
> /home/masami/rpmbuild/SOURCES/x86-Lock-down-IO-port-access-when-module-security-is.patch
> /home/masami/rpmbuild/SOURCES/ACPI-Limit-access-to-custom_method.patch
> /home/masami/rpmbuild/SOURCES/asus-wmi-Restrict-debugfs-interface-when-module-load.patch
> /home/masami/rpmbuild/SOURCES/Restrict-dev-mem-and-dev-kmem-when-module-loading-is.patch
> /home/masami/rpmbuild/SOURCES/acpi-Ignore-acpi_rsdp-kernel-parameter-when-module-l.patch
> /home/masami/rpmbuild/SOURCES/kexec-Disable-at-runtime-if-the-kernel-enforces-modu.patch
> /home/masami/rpmbuild/SOURCES/x86-Restrict-MSR-access-when-module-loading-is-restr.patch
> /home/masami/rpmbuild/SOURCES/Add-option-to-automatically-enforce-module-signature.patch
> /home/masami/rpmbuild/SOURCES/efi-Disable-secure-boot-if-shim-is-in-insecure-mode.patch
> /home/masami/rpmbuild/SOURCES/efi-Make-EFI_SECURE_BOOT_SIG_ENFORCE-depend-on-EFI.patch
> /home/masami/rpmbuild/SOURCES/efi-Add-EFI_SECURE_BOOT-bit.patch
> /home/masami/rpmbuild/SOURCES/hibernate-Disable-in-a-signed-modules-environment.patch
> /home/masami/rpmbuild/SOURCES/Add-EFI-signature-data-types.patch
> /home/masami/rpmbuild/SOURCES/Add-an-EFI-signature-blob-parser-and-key-loader.patch
> /home/masami/rpmbuild/SOURCES/KEYS-Add-a-system-blacklist-keyring.patch
> /home/masami/rpmbuild/SOURCES/MODSIGN-Import-certificates-from-UEFI-Secure-Boot.patch
> /home/masami/rpmbuild/SOURCES/MODSIGN-Support-not-importing-certs-from-db.patch
> /home/masami/rpmbuild/SOURCES/Add-sysrq-option-to-disable-secure-boot-mode.patch
> /home/masami/rpmbuild/SOURCES/drm-i915-hush-check-crtc-state.patch
> /home/masami/rpmbuild/SOURCES/disable-i8042-check-on-apple-mac.patch
> /home/masami/rpmbuild/SOURCES/lis3-improve-handling-of-null-rate.patch
> /home/masami/rpmbuild/SOURCES/watchdog-Disable-watchdog-on-virtual-machines.patch
> /home/masami/rpmbuild/SOURCES/scsi-sd_revalidate_disk-prevent-NULL-ptr-deref.patch
> /home/masami/rpmbuild/SOURCES/criu-no-expert.patch
> /home/masami/rpmbuild/SOURCES/ath9k-rx-dma-stop-check.patch
> /home/masami/rpmbuild/SOURCES/xen-pciback-Don-t-disable-PCI_COMMAND-on-PCI-device-.patch
> /home/masami/rpmbuild/SOURCES/Input-synaptics-pin-3-touches-when-the-firmware-repo.patch
> /home/masami/rpmbuild/SOURCES/firmware-Drop-WARN-from-usermodehelper_read_trylock-.patch
> /home/masami/rpmbuild/SOURCES/drm-i915-turn-off-wc-mmaps.patch
> Applying: lib/cpumask: Make CPUMASK_OFFSTACK usable without debug
> dependency
> Applying: amd-xgbe-a0: Add support for XGBE on A0
> Applying: amd-xgbe-phy-a0: Add support for XGBE PHY on A0
> Applying: arm64: avoid needing console= to enable serial console
> Applying: usb: make xhci platform driver use 64 bit or 32 bit DMA
> Applying: arm64: acpi drop expert patch
> Applying: ARM: tegra: usb no reset
> error: drivers/usb/core/hub.c: does not exist in index
> Patch failed at 0007 ARM: tegra: usb no reset
> The copy of the patch that failed is found in:
> /home/masami/rpmbuild/BUILD/kernel-4.1.fc23/linux-4.2.0-0.rc3.git3.1.fc23.x86_64/.git/rebase-apply/patch
> When you have resolved this problem, run "git am --continue".
> If you prefer to skip this patch, run "git am --skip" instead.
> To restore the original branch and stop patching, run "git am --abort".
> error: Bad exit status from /var/tmp/rpm-tmp.4LpL3H (%prep)
>
>
> RPM build errors:
>     Bad exit status from /var/tmp/rpm-tmp.4LpL3H (%prep)
>
> Cheers,
> -- 
> Masami Ichikawa
> - masami256(a)gmail.com
> - masami(a)fedoraproject.org 
Sorry for unrelated again but like Masami I don't use much of Fedora kernels.  I
usually use, as provided by the Fedora project, use the vanilla kernel repository for my
kernels.  I get much more stability from this.

Lance
> _______________________________________________
> kernel mailing list
> kernel(a)lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/kernel