[F15 PATCH 0/6] ARM: Add support for pata_imx (for Genesi Smarttop)

[Niels de Vos]

Hi there!

This patchset contains only cherry-picked patches from Linus' current
tree. Without these patches, the Genesi Smarttop does not recognize the
onboard SSD-chip. The required driver (pata_imx) is already included in
the ARM verion of the kernel, only the bindings with the board are
missing.

Instead of sending all patches in separate emails, I'm attaching them
numbered and all for easy inclusion in the F15 kernel. I have done
local testing and can happily report that the 2.6.41.6-1 kernel can use
the onboard SSD when appying these patches.

I (and other Fedora ARM owners of a Smarttop) appreciate it if these
patches can be included in a next release. Many thanks,
Niels

---
Arnaud Patard (4):
  imx51: add pata device
  imx51: add pata clock
  imx: efika: Enable pata.
  Fix pata imx resource

Fabio Estevam (1):
  ARM: imx: Add PATA resources for other i.MX processors

Uwe Kleine-König (1):
  ARM: mx5: fix remaining inconsistent names for irqs

 arch/arm/mach-mx5/Kconfig                       |    1 +
 arch/arm/mach-mx5/clock-mx51-mx53.c             |    7 +-
 arch/arm/mach-mx5/devices-imx51.h               |    4 +
 arch/arm/mach-mx5/devices.c                     |   10 +-
 arch/arm/mach-mx5/mm.c                          |    8 +-
 arch/arm/mach-mx5/mx51_efika.c                  |    2 +
 arch/arm/plat-mxc/devices/Kconfig               |    3 +
 arch/arm/plat-mxc/devices/Makefile              |    1 +
 arch/arm/plat-mxc/devices/platform-pata_imx.c   |   59 ++++++++
 arch/arm/plat-mxc/include/mach/devices-common.h |    8 +
 arch/arm/plat-mxc/include/mach/mx35.h           |    2 +-
 arch/arm/plat-mxc/include/mach/mx51.h           |  162 +++++++++++-----------
 12 files changed, 175 insertions(+), 92 deletions(-)
 create mode 100644 arch/arm/plat-mxc/devices/platform-pata_imx.c