Hi, Chris.
Could you help take a look at this patch? Please feel free to
point out if there is somewhere incorrect.
---
iSCSI adapter (also known as iSCSI HBA or iSCSI NIC)
Provides storage area network (SAN) connectivity over TCP/IP and
Ethernet network infrastructure, and offloads the iSCSI and TCP/IP
processing to the adapter to speed performance.
iSCSI boot from iBFT(iSCSI boot from table)
The iSCSI Boot Firmware Table (iBFT) is a component of the ACPI 3.0b
standard that provides operating systems a standard way to boot from
software-initiated iSCSI protocol.
Software iSCSI
Use software initiator to connect SAN server.
For iSCSI adapter, all of iSCSI diskes can be brought up by itself,
without any extra OS's work. It is independent of OS. This type of iSCSI
uses hardware initiator to connect SAN server.
For iSCSI boot from iBFT, iSCSI seesion configuration will be loaded
from firmware firstly, then software iSCSI initiator is used to connect
SAN server.
CC: Chris Leech <cleech(a)redhat.com>
Signed-off-by: Minfei Huang <mhuang(a)redhat.com>
---
supported-kdump-targets.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/supported-kdump-targets.txt b/supported-kdump-targets.txt
index 65c95fc..c4f9fae 100644
--- a/supported-kdump-targets.txt
+++ b/supported-kdump-targets.txt
@@ -41,6 +41,7 @@ storage:
software RAID (mdraid)
hardware RAID (cciss, hpsa, megaraid_sas, mpt2sas, aacraid)
SCSI/SATA disks
+ iSCSI HBA
network:
Hardware using kernel modules: (tg3, igb, ixgbe, sfc, e1000e, bna,
@@ -76,7 +77,7 @@ Unsupported Dump targets
storage:
BIOS RAID
Thin provisioning volume
- hardware iSCSI
+ iSCSI boot from iBFT
FCoE
legacy IDE
glusterfs
--
2.1.0
Show replies by date