RE: Ipw2200 problem in Fedora 8
by Eason Mai
Hi,
When I remove the ipw2200-firmware,install it again, and verify ipw2200-firmware, it show me:
#rpm -e ipw2200-firmware-3.0-9
#yum -y install ipw2200-firmware
#rpm -V ipw2200-firmware-3.0-9
(no message)
But when I reinstalled the ipw2200 module, it showed me:
#rmmod ipw2200
#modprobe ipw2200
#tail -f /var/log/messages
.....
Apr 29 10:19:58 localhost kernel: ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
Apr 29 10:19:58 localhost kernel: ipw2200: Copyright(c) 2003-2006 Intel Corporation
Apr 29 10:19:58 localhost kernel: ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 21 (level, low) -> IRQ 22
Apr 29 10:19:58 localhost kernel: ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
Apr 29 10:20:08 localhost kernel: ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
Apr 29 10:20:08 localhost kernel: ipw2200: Unable to load firmware: -2
Apr 29 10:20:08 localhost kernel: ipw2200: failed to register network device
Apr 29 10:20:08 localhost kernel: ACPI: PCI interrupt for device 0000:02:02.0 disabled
Apr 29 10:20:08 localhost kernel: ipw2200: probe of 0000:02:02.0 failed with error -5
.....
And run dmesg, it shows:
#dmesg|grep ipw2200
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ipw2200: probe of 0000:02:02.0 failed with error -5
Any idea? Thanks
Eason
----------------------------------------
> Date: Mon, 28 Apr 2008 16:57:58 -0700
> From: zaitcev(a)redhat.com
> To: mricheng(a)hotmail.com
> CC: fedora-laptop-list(a)redhat.com
> Subject: Re: Ipw2200 problem in Fedora 8
>
> On Mon, 28 Apr 2008 23:27:59 +0000, Eason Mai wrote:
>
>> # rpm -V ipw2200-firmware-3.0-9
>>
>> .......T /lib/firmware/ipw2200-bss.fw
>> .......T /lib/firmware/ipw2200-ibss.fw
>> .......T /lib/firmware/ipw2200-sniffer.fw
>>
>> Any problem with ipw2200-firmware? And idea? Thanks.
>
> 'T' is mtime difference. Curious what might cause it, but immaterial.
>
>>> ipw2200: Unable to load firmware: -2
>
> Isn't -2 equal to ENOENT? It's a bad filename.
>
> -- Pete
15 years, 11 months
RE: Ipw2200 problem in Fedora 8
by Eason Mai
Hi,
When I verify ipw2200-firmware, it shows me the following:
# rpm -V ipw2200-firmware-3.0-9
.......T /lib/firmware/ipw2200-bss.fw
.......T /lib/firmware/ipw2200-ibss.fw
.......T /lib/firmware/ipw2200-sniffer.fw
Any problem with ipw2200-firmware? And idea? Thanks.
Eason
----------------------------------------
> From: adalbert.prokop(a)gmx.de
> To: mricheng(a)hotmail.com
> Subject: Re: Ipw2200 problem in Fedora 8
> Date: Mon, 28 Apr 2008 22:09:57 +0200
>
> Eason Mai schrieb am Donnerstag, 24. April 2008:
>
> Hi!
>
>> Thanks for your reply. I have checked my linux box, I have installed
>> ipw2200-firmware already.
>>
>> #rpm -qa|grep firmware|grep ipw
>> ipw2200-firmware-3.0-9
>>
>> and there are some firmware files related to ipw2200 in the
>> /lib/firmware/
>>
>> #ls /lib/firmware/ipw2200*
>> /lib/firmware/ipw2200-bss.fw /lib/firmware/ipw2200-sniffer.fw
>> /lib/firmware/ipw2200-ibss.fw
>
> That's the same I saw on the Acer 8K. :/
>
>> Any ideas to fix it? Thanks.
>
> Well, not really. The message said
>
> ipw2200: Unable to load firmware: -2
>
> Maybe the file is not readable. Or damaged. Try
> rpm -V ipw2200-firmware-3.0-9
>
> But that's the last reasonable idea I have.
>
> --
> bye,
> Adalbert
>
> Reading is to the mind what exercise is to the body.
15 years, 11 months
Re: Dual head t42 with Fedora 7, tricks?
by gene horodecki
Yeah, I actually came from Fedora 8 and dual head wouldn't work at all.
Since then I've loaded up Fedora 7 and Fedora 9 preview... In Fedora 7,
the DH works out of the box but yeah we've already talked about that..
The Fedora 9 Dual head dialog didn't work at all... There was no card to
select in the '2nd video card' field for me and so I am a tad concerned
about that... I hope it gets fixed for the release.
On Sun, 2008-04-27 at 19:17 +0200, D. H. Holsboer wrote:
> Sometime in 2007 I tried to use xrandr, but it did not work at all, even
> after de-installing and re-installing. yum said all was OK after
> re-installing, nut no way!
>
> That's when I gave up on dual head.
> Let's see what FC9 brings...
>
> Daniel
>
> Sean Madden schreef:
> > I'm running Fedora 8/9 Preview, and the easiest way to do it would be
> > to use the 'xrandr' (XResizeANDRotate) command to accomplish this.
> > Fedora 7 had/has the command, but with limited support. Easiest way
> > to do it would be to upgrade to Fedora 8, or wait another 16 days
> > until Fedora 9 comes out. Then upgrade.
> >
> > -Sean Madden
> >
> > Gene Horodecki wrote:
> >> Hi there.. I was able to get dual-head working on my t42 (Radeon
> >> Mobility 7500) working out of the box to a certain extent but still not
> >> to my satisfaction. Is there a trick to getting a different resolution
> >> on each of the monitors? I have a 1024x768 LCD screen and a 1600x1200
> >> VGA monitor and I had hoped to use each to the fullest extent. So far
> >> it hasn't worked with either extended desktop (which I prefer) or with
> >> the two desktop config.
> >>
> >> Please help? Thanks.
> >>
> >> _______________________________________________
> >> Fedora-laptop-list mailing list
> >> Fedora-laptop-list(a)redhat.com
> >> http://www.redhat.com/mailman/listinfo/fedora-laptop-list
> >>
> >
> > _______________________________________________
> > Fedora-laptop-list mailing list
> > Fedora-laptop-list(a)redhat.com
> > http://www.redhat.com/mailman/listinfo/fedora-laptop-list
> >
> >
15 years, 12 months
Dual head t42 with Fedora 7, tricks?
by gene horodecki
Hi there.. I was able to get dual-head working on my t42 (Radeon
Mobility 7500) working out of the box to a certain extent but still not
to my satisfaction. Is there a trick to getting a different resolution
on each of the monitors? I have a 1024x768 LCD screen and a 1600x1200
VGA monitor and I had hoped to use each to the fullest extent. So far
it hasn't worked with either extended desktop (which I prefer) or with
the two desktop config.
Please help? Thanks.
15 years, 12 months
t42 thinkpad dual head! (help please?)
by gene horodecki
I've tried every xorg.conf I could find on the internet for dual-heading a
Radeon Mobility 7500 and nothing works for me. Mostly I get X11 dying with
'No Screens Found' but sometimes it dies with an error code. In the
meantime, I've managed to kill my frame rate even on my fallback config and
my floppy windows are now choppy windows.
Can anyone assist me with dual-heading a Thinkpad T42 laptop? I'd much
appreciate it.
15 years, 12 months
RE: Fedora-laptop-list Digest, Vol 24, Issue 7
by Philippe Leclercq
Message: 1
Date: Wed, 23 Apr 2008 04:00:54 +0000
From: Eason Mai <mricheng(a)hotmail.com>
Subject: Ipw2200 problem in Fedora 8
To: <fedora-laptop-list(a)redhat.com>
Message-ID: <BAY128-W4241DBFB13CF53A4F11267DEE30(a)phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"
Hi all,
I use Fedora 8 under my laptop Thinkpad x40, kernel vesion: 2.6.24.4-64.fc8.
But I have a problem with the wireless card when I run Fedora 8, actually
the wireless card can work well under WinXP. When I boot my laptop under
Fedora 8, it always show me in the log file:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 21 (level, low) -> IRQ 22
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ACPI: PCI interrupt for device 0000:02:02.0 disabled
ipw2200: probe of 0000:02:02.0 failed with error -5
Does any idea to fix such problem? Thanks.
Eason
-----------------------------------------------------------------------
Hi Eason,
Did you try to boot the linux kernel without the acpi option ? If yes, does
it change something ?
I do have such Wireless adapter ( ipw2200 ) on a hp nc8000 running the same
kernel and it doesn't generate any conflict messages like yours. Could you
please also check the release for the ipw2200-firmware RPM package ( rpm - q
ipw2200-firmware ) ?
Thanks for your feedback.
Philippe
15 years, 12 months
Ipw2200 problem in Fedora 8
by Eason Mai
Hi all,
I use Fedora 8 under my laptop Thinkpad x40, kernel vesion: 2.6.24.4-64.fc8. But I have a problem with the wireless card when I run Fedora 8, actually the wireless card can work well under WinXP. When I boot my laptop under Fedora 8, it always show me in the log file:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 21 (level, low) -> IRQ 22
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ACPI: PCI interrupt for device 0000:02:02.0 disabled
ipw2200: probe of 0000:02:02.0 failed with error -5
Does any idea to fix such problem? Thanks.
Eason
15 years, 12 months
f9 on the Asus EEE PC (resume and additional keys)
by Sven Lankes
Hi,
I have installed Fedora 9 rc on an Asus EEE 701. This has been quite
successful. A lot of things work out of the box or with minimal
tweaking.
There are two things that don't work for me and where I am out of
knowledge and/or google juice to fix them. Maybe someone has an idea or
a pointer for me there.
The first issue I have is the resume:
The machine suspends fine but doesn't resume successfully. The screen
stays black on resume. It seems that it is still doing something as
pushing the power button after a failed resume suspends the machine
again (suspends as in the power led starts blinking again).
There is an entry in the fdi suspend-quirks database for the 701 which
activates the quirks for s3_bios and dpms_on and the eee seems to
suspend fine for others running other distributions or even f8
(eeedora). I have tried some other quirks and also pm-suspend without
any quirks but the result is always the same.
The second issue is how to map some of the additional keys to do
anything useful. The asus patch for the eee is included in the fedora
kernel rpm so there seems to be no need for a patched acpi_asus.ko.
Screen-brightness control works (fn + f3/f4) and suspend (fn + f1) work
and according to the wiki page at http://fedoraproject.org/wiki/EeePc
the others should do at least something too (no idea what 'needs gconf
tweaks' refers to).
Pushing e.g. the mute-button does not generate any dmesg output and
nothing in xev either.
Any hints are appreciated.
--
sven === jabber/xmpp: sven(a)lankes.net
16 years
Sound and on-screen display
by Dougal Ballantyne
Hi,
I am running Fedora 8 x86_64 on a HP Compaq 6710b. I am having issues
with sound.
1. When I mute the sound, it only stays muted for about a minute and
then unmutes itself.
2. When adjusting the sound up/down or muting, there is no visual
display on the screen. (Used to run Ubuntu and it worked there.)
Has anybody seen this before?
Kind regards,
Dougal
16 years
top wakeups causes and 8254_timer not connected.
by Strong
Is this ok, for an idle system (by powertop):
P-states (frequencies)
1.60 Ghz 0.0%
800 Mhz 100.0%
Wakeups-from-idle per second : 561.9 interval: 10.0s
no ACPI power usage estimate available
Top causes for wakeups:
82.6% (925.0) <interrupt> : extra timer interrupt
8.0% ( 90.0) mplayer : do_nanosleep (hrtimer_wakeup)
4.2% ( 46.9) <interrupt> : ohci_hcd:usb2, HDA Intel
1.8% ( 20.6) X : do_setitimer (it_real_fn)
1.5% ( 17.0) X : schedule_timeout (process_timeout)
1.2% ( 13.6) kicker : schedule_timeout (process_timeout)
Double core Turion 64 (Dell inspiron 1501) on F8
Seems as my second core does not function?
In dmesg I see a lot of:
APIC error on CPU0: 40(40)
APIC error on CPU1: 40(40)
and the 8254_timer not connected at the kernel booting. IS there a way
to fix it?
PS My googling helped me nothing...
16 years
