Hi Olivier,
I did try with ur config, but doesn't work :(
after the login box, my pc freezen,
i send the error log...
other way... i have other same laptop (friend) and the dual monitos works...
tomorrow i will try the re-size the virtual screen.
best regards.
2009/2/4 Olivier Renault <orenault(a)redhat.com>
Jean Figueiredo wrote:
> Hello all!
>
> i have some problem with the dual head... its works just mirror and not
> extender desktop...
>
> so, solutions? anybody knows?
>
> best regards
>
> Sorry, my english is very poor..
>
> Hi,
I have got it working w/ the attached xorg.conf
Olivier
PS:mine is an i945
Section "Device"
Identifier "Intel 945G "
Driver "intel"
# Using the name of the output defined by the video driver plus the
identifier of a
# monitor section, one associates a monitor section with an
output by adding an
# option to the Device section in the following format:
# Option "Monitor-outputname" "monitor ID"
Option "monitor-VGA" "foo"
Option "monitor-LVDS" "bar"
#Option "monitor-TMDS-1" "dvi"
EndSection
Section "Monitor"
Identifier "foo"
Option "PreferredMode" "1280x1024"
Option "Position" "0 0"
# specifies a mode to be marked as the preferred initial mode of the
monitor
# Option "PreferredMode" "800x600"
# This optional entry specifies the position of the monitor within
the X screen.
#Option "Position" "1024 0"
#This optional entry specifies that the monitor should be ignored
# entirely, and not reported through RandR. This is useful if
the
# hardware reports the presence of outputs that do not
exist.
#Option "Ignore" "true"
EndSection
Section "Monitor"
Identifier "bar"
Option "PreferredMode" "1024x768"
Option "Enable" "true"
#Options LeftOf, RightOf, Above, Below specify monitors� relative
position
Option "RightOf" "foo"
# This optional entry specifies whether the monitor should be
# turned on at startup. By default, the server will attempt
to
# enable all connected monitors.
#Option "Enable" "true"
#This optional entry specifies the initial rotation of the given
monitor.
# Valid values for rotation are "normal", "left",
"right", and
"inverted".
# Option "Rotate" "left"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 945G Integrated Graphics
Controller"
Monitor "foo"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768"
"640x480"
# This optional entry specifies the virtual screen
resolution to be used.
# If this entry is not present, the virtual screen
resolution will be set to
# accommodate all the valid video modes given in the Modes
entry.
# There is a known issue that DRI doesn't work on pre-965 if
maximum is larger than 2048x2048.
Virtual 2304 1024
EndSubSection
EndSection
--
Cumpris,
Jean Figueiredo
-----------------------------------------
Jean Figueiredo
jfigueiredo(a)gmail.com
http://warpath.zapto.org
"Software is like sex, it's better when it's free." - Linus Torvalds