Jamie Bainbridge <jamie.bainbridge(a)gmail.com>
You should be able to create a single team with all three NICs.
On your switch, create an LACP port-channel with the 2x10G ports, and
another LACP port-channel with the 1x1G port.
The team will negotiate one LACP Aggregator on the 2x10G ports, and
another LACP Aggregator on the 1x1G port.
Only one Aggregator should be used at one time.
You can control which aggregator is used with the "agg_select_policy"
option. You probably want to use "bandwidth".
The result should be: Any time you have either/both of the 10G ports
up, those will be used. If you pull out the 10G cables, then the
Aggregator fails over to the 1G port. When you plug the 10G cable(s)
back in, the Aggregator goes back to the 10G port(s).
Jamie
Hi Jamie & Jiri:
thanks a lot for the advice. I search the libteam mail list and
found several years ago the same question is asked and answered. sorry
for the noise. and thanks so much for the detailed description step by
step. I will enjoy my 3 nic lacp team!!
Regards,
tbskyd