FATAL error:

[Lars Bjørndal]

Hello

Running livecd-creator, I get the following error message:

Building an initramfs at /boot/livecd-initramfs.img for kernel
2.6.21-1.3163.fc7
FATAL: Module ide_cd not found.
FATAL: Module usbhid not found.
Done; initramfs is 4,3M.

Should I use an older kernel while building the livecd?

Lars

[Jeremy Katz]

On Mon, 2007-05-21 at 09:27 +0200, Lars Bjørndal wrote:
>  Running livecd-creator, I get the following error message:
>  
>  Building an initramfs at /boot/livecd-initramfs.img for kernel
>  2.6.21-1.3163.fc7
>  FATAL: Module ide_cd not found.
>  FATAL: Module usbhid not found.
>  Done; initramfs is 4,3M.
>  
>  Should I use an older kernel while building the livecd? 
No, the messages are misleading... I thought I had killed them off, but
apparently not.  Patches accepted or I'll get there eventually :-)

Jeremy

[Lars Bjørndal]

Jeremy Katz <katzj(a)redhat.com&gt; writes:

>  On Mon, 2007-05-21 at 09:27 +0200, Lars Bjørndal wrote:
> > Running livecd-creator, I get the following error message:
> > 
> > Building an initramfs at /boot/livecd-initramfs.img for kernel
> > 2.6.21-1.3163.fc7
> > FATAL: Module ide_cd not found.
> > FATAL: Module usbhid not found.
> > Done; initramfs is 4,3M.
> > 
> > Should I use an older kernel while building the livecd?
>
>  No, the messages are misleading... I thought I had killed them off, but
>  apparently not.  Patches accepted or I'll get there eventually :-) 
Fine, if you could do that. However, the CD will not start. I get the
following error messages:

Booting to kernel
Buffer I/O error on device sr0,logical 67351
(8 times)
...
Setting up new root fs
No fstab.sys, mounting internal defaults
...
Unable to load selinux policy. Machine is in enforcing mode.
Halting now.

I'm running livecd-tools version 008-1.fc7, on an yum-updated FC7
install:

Uname -a gives:
Linux cd.localdomain 2.6.21-1.3163.fc7 #1 SMP Tue May 15 17:23:21 EDT
2007 i686
i686 i386 GNU/Linux

Please tell me if I should provide some more info.

Lars

[Vladimir Shebordaev]

Lars,

pardon me, but you are actually trying to crossbreed FC7 against 
FC6. It seems to have got prenatal injury, some kind of brain 
damage, I guess.. So, numerous abortions are not surprizing...

Why don't you try authentic FC7 Live CD with its naturally born 
livecd-tools? You will the most probably succeed with the FC7 
LiveCD installation. Then you could add missing packages and make 
you custom FC7 LiveCD. Perhaps, it will be more vivid...

In the hope it helps.

Regards,
Vladimir

Lars Bjørndal пишет:
>  Jeremy Katz <katzj(a)redhat.com&gt; writes:
>  
> > On Mon, 2007-05-21 at 09:27 +0200, Lars Bjørndal wrote:
> >> Running livecd-creator, I get the following error message:
> >>
> >> Building an initramfs at /boot/livecd-initramfs.img for kernel
> >> 2.6.21-1.3163.fc7
> >> FATAL: Module ide_cd not found.
> >> FATAL: Module usbhid not found.
> >> Done; initramfs is 4,3M.
> >>
> >> Should I use an older kernel while building the livecd?
> > No, the messages are misleading... I thought I had killed them off, but
> > apparently not.  Patches accepted or I'll get there eventually :-)
>  
>  Fine, if you could do that. However, the CD will not start. I get the
>  following error messages:
>  
>  Booting to kernel
>  Buffer I/O error on device sr0,logical 67351
>  (8 times)
>  ...
>  Setting up new root fs
>  No fstab.sys, mounting internal defaults
>  ...
>  Unable to load selinux policy. Machine is in enforcing mode.
>  Halting now.
>  
>  I'm running livecd-tools version 008-1.fc7, on an yum-updated FC7
>  install:
>  
>  Uname -a gives:
>  Linux cd.localdomain 2.6.21-1.3163.fc7 #1 SMP Tue May 15 17:23:21 EDT
>  2007 i686
>  i686 i386 GNU/Linux
>  
>  Please tell me if I should provide some more info.
>  
>  Lars
>  
>  --
>  Fedora-livecd-list mailing list
>  Fedora-livecd-list(a)redhat.com
>  https://www.redhat.com/mailman/listinfo/fedora-livecd-list
>

[Jeremy Katz]

On Mon, 2007-05-21 at 20:38 +0200, Lars Bjørndal wrote:
>  Fine, if you could do that. However, the CD will not start. I get
> the
>  following error messages:
>  Booting to kernel
>  Buffer I/O error on device sr0,logical 67351
>  (8 times) 
This is a read error off of your CD...

>  ...
>  Setting up new root fs
>  No fstab.sys, mounting internal defaults
>  ...
>  Unable to load selinux policy. Machine is in enforcing mode.
>  Halting now. 
And this is init complaining -- you've said that you want SELinux to be
configured in enforcing mode but you didn't install policy.  Therefore,
init won't let you boot.  selinux=0 on the kernel command line should
let it boot.  And then either add
  selinux --disabled
to your config or install a policy package.

Jeremy