liveusb-creator May 2009

liveusb-creator@lists.fedorahosted.org

5 participants
12 discussions

--home-size-mb
by Williamson Grant 26 Jun '09

26 Jun '09

Hi are there any plans to add the livecd-tools "--home-size-mb" option to the gui, i.e. so on linux an encrypted home directory can be created? I did look through the archives but it was not mentioned.

2 1

Ticket #473 - Cannot find 7z.
by Mark Simonds 26 Jun '09

26 Jun '09

I have been unable to get round this one. The directory listing below shows that I have extracted all the files. I have run liveusb-creator from a DOS box, from C:\Fedora. I have not run Linux before, but I have used Unix on an Apollo, and Apollo Domain many years ago. What should I now do, give up and seek another distribution? Any help would be much appreciated. Mark Simonds, 116 West Bay Road, Bridport, Dorset DT6 4AZ. UK. Volume in drive C has no label. Volume Serial Number is BCFB-A209 Directory of C:\Fedora 17/03/2009 12:42 <DIR> . 17/03/2009 12:42 <DIR> .. 09/03/2009 20:08 3,178 7-Zip-License.txt 09/03/2009 20:08 601,088 7z.dll 09/03/2009 20:08 141,824 7z.exe 09/03/2009 20:08 136,192 7zCon.sfx 17/03/2009 12:42 0 cat.txt 09/03/2009 20:08 342,016 dd.exe 14/03/2009 22:03 714,407,936 F10-i686-Live.iso 09/03/2009 20:08 18,327 LICENSE.txt 09/03/2009 20:14 28,694,676 liveusb-creator.exe 17/03/2009 12:41 3,639 liveusb-creator.exe.log 24/05/2008 02:36 499,712 MSVCP71.DLL 21/02/2003 05:42 348,160 MSVCR71.dll 09/03/2009 20:08 1,458 README.txt 09/03/2009 20:08 27,136 syslinux.exe 23/12/2008 16:11 4,608 w9xpopen.exe 15 File(s) 745,229,950 bytes 2 Dir(s) 12,756,525,056 bytes free

2 1

some glitches re-making a live USB
by S Page 26 Jun '09

26 Jun '09

I downloaded the new version of the Rawhide-XO .iso to test and reinserted my 8GB SD card, In my instance of Live USB Creator that was still running (on Windows XP SP3) I browsed to the new .iso and clicked [Create Live USB]. I ran into a few problems... Bug: the progress bar continued to show green 100% even though I was starting a new run. The program warned about overwriting my existing LiveOS and persistent layer, then displayed "Press 'Create Live USB' again if you wish to continue." (good, though maybe this should be an alert as well as a console message. When I clicked [Create Live USB] again to continue, the program complained that it couldn't overwrite a file: Unable to remove previous LiveOS: [Error 5] Access is denied: 'G:\\syslinux\\ldlinux.sys' Bug: why the duplicated backslashes? I clicked [Create Live USB] again and the writing proceeded anyway, so I'm not sure what it did. I used Windows Process Monitor to captured the file operations, they're at the end of this message. The problem file's attributes are RHS (Read-only, Hidden, System), that combination makes it tricky to remove a file. (I finally cleared them with DOS `attrib -r -h -s G:\syslinux\ldlinux.sys` and repeated from scratch.) I think this is a file that LiveUSB Creator creates, so it should be able to remove it. Even if the iso made this file, Live USB Creator should try harder to remove files it's going to overwrite. Bug: while reproducing this several times, it seems at the point of the error I can click [Browse], choose a new ISO and then click [Create Live USB], but it seems the current "burn" continues, I don't see a new "xyz.iso selected". The UI and the status console are at best unclear. Crash?: As I was composing this e-mail I repeated the steps with Windows utilities Process Monitor and Opened Files View running. When I got to the "unable to remove previous LiveOS" error message I clicked the close box and immediately got a BSOD. I've reproduced everything else but haven't tried to reproduce this crash. Cheers, -- =S Page Process Monitor for the problem file. A successful file write has the same queries, but succeeds at SetDispositionInformation(), then does a few WriteFile()s. Operation - Path - Result - Detail QueryOpen G:\syslinux\ldlinux.sys FAST IO DISALLOWED CreateFile G:\syslinux\ldlinux.sys SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened QueryNetworkOpenInformationFile G:\syslinux\ldlinux.sys FAST IO DISALLOWED QueryNetworkOpenInformationFile G:\syslinux\ldlinux.sys SUCCESS CreationTime: 3/16/2009 10:02:44 PM, LastAccessTime: 3/16/2009 12:00:00 AM, LastWriteTime: 3/16/2009 10:02:46 PM, ChangeTime: 0, AllocationSize: 16384, EndOfFile: 13671, FileAttributes: RHS CloseFile G:\syslinux\ldlinux.sys SUCCESS CreateFile G:\syslinux\ldlinux.sys SUCCESS Desired Access: Read Attributes, Delete, Disposition: Open, Options: Non-Directory File, Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened QueryAttribbuteTagFile G:\syslinux\ldlinux.sys INVALID PARAMETER SetDispositionInformationFile G:\syslinux\ldlinux.sys CANNOT DELETE Delete: True CloseFile G:\syslinux\ldlinux.sys SUCCESS QueryOpen G:\syslinux\ldlinux.sys FAST IO DISALLOWED CreateFile G:\syslinux\ldlinux.sys SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened QueryNetworkOpenInformationFile G:\syslinux\ldlinux.sys FAST IO DISALLOWED QueryNetworkOpenInformationFile G:\syslinux\ldlinux.sys SUCCESS CreationTime: 3/16/2009 10:02:44 PM, LastAccessTime: 3/16/2009 12:00:00 AM, LastWriteTime: 3/16/2009 10:02:46 PM, ChangeTime: 0, AllocationSize: 16384, EndOfFile: 13671, FileAttributes: RHS CloseFile G:\syslinux\ldlinux.sys SUCCESS CreateFile G:\syslinux\ldlinux.sys SUCCESS Desired Access: Read Attributes, Delete, Disposition: Open, Options: Non-Directory File, Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened QueryAttribbuteTagFile G:\syslinux\ldlinux.sys INVALID PARAMETER ===> SetDispositionInformationFile G:\syslinux\ldlinux.sys CANNOT DELETE Delete: True CloseFile G:\syslinux\ldlinux.sys SUCCESS

2 1

EXT2 support under windows.
by Erez Strauss 26 Jun '09

26 Jun '09

Hi usb-creator list. I'm interested to create usb with ext2 filesystem (I know it will destroy the usb-flash content, if vfat was there). Is there a way to do it with the liveusb-creator? If not implemented, it should be possible probably with linking it with e2fsprogs library (compiled with mingw or cygwin). Where can I find the build instruction from the python sources? Thanks for any hint, Erez

2 1

po/th.po
by Transifex System User 29 May '09

29 May '09

po/th.po | 352 ++++++++++++++++++++++++++++++++++----------------------------- 1 file changed, 191 insertions(+), 161 deletions(-) New commits: commit 48758ef4a36bfc6e468c8487708859ba211b06f1 Author: willwill <willwill(a)fedoraproject.org> Date: Fri May 29 18:27:24 2009 +0000 Sending translation for Thai diff --git a/po/th.po b/po/th.po index 476ff11..9e9ff3a 100644 --- a/po/th.po +++ b/po/th.po @@ -1,14 +1,13 @@ -# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. -# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. # +# Manatsawin Hanmongkolchai <manatsawin(a)gmail.com>, 2009. msgid "" msgstr "" "Project-Id-Version: liveusb-creator\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2009-03-13 07:55+0000\n" -"PO-Revision-Date: 2009-03-13 17:20+0700\n" +"POT-Creation-Date: 2008-09-03 02:54-0400\n" +"PO-Revision-Date: 2009-05-30 01:26+0700\n" "Last-Translator: Manatsawin Hanmongkolchai <manatsawin(a)gmail.com>\n" "Language-Team: Thai <thai-l10n(a)googlegroups.com>\n" "MIME-Version: 1.0\n" @@ -16,51 +15,67 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "X-Poedit-Language: Thai\n" "X-Poedit-Country: Thailand\n" +"X-Generator: Lokalize 0.3\n" +"Plural-Forms: nplurals=2; plural=n != 1;\n" -#: ../liveusb/__init__.py:42 -msgid "You must run this application as root" -msgstr "คุณต้องรันโปรแกรมนี้เป็นรูท" - -#: ../liveusb/gui.py:74 +#: ../liveusb/gui.py:69 #, python-format msgid "Unknown release: %s" msgstr "ไม่รู้จักรุ่น: %s" -#: ../liveusb/gui.py:78 +#: ../liveusb/gui.py:73 #, python-format msgid "Downloading %s..." msgstr "กำลังดาวน์โหลด %s..." -#: ../liveusb/gui.py:173 -msgid "Error: Cannot set the label or obtain the UUID of your device. Unable to continue." +#: ../liveusb/gui.py:152 +msgid "Verifying filesystem..." +msgstr "กำลังตรวจสอบระบบไฟล์..." + +#: ../liveusb/gui.py:155 +msgid "" +"Error: Cannot set the label or obtain the UUID of your device. Unable to " +"continue." msgstr "ผิดพลาด: ไม่สามารถกำหนดชื่อหรือหา UUID ของอุปกรณ์ของคุณ ไม่สามารถดำเนินการต่อได้" -#: ../liveusb/gui.py:203 +#: ../liveusb/gui.py:164 +msgid "Verifying SHA1 of LiveCD image..." +msgstr "กำลังตรวจสอบ SHA1 ของอิมเมจ LiveCD..." + +#: ../liveusb/gui.py:166 +msgid "" +"Error: The SHA1 of your Live CD is invalid. You can run this program with " +"the --noverify argument to bypass this verification check." +msgstr "" +"ผิดพลาด: SHA1 ของ Live CD ของคุณผิดพลาด คุณสามารถรันโปรแกรมนี้โดยใช้อากิวเมนต์ --" +"noverify เพื่อข้ามการตรวจสอบนี้" + +#: ../liveusb/gui.py:177 +msgid "Extracting live image to USB device..." +msgstr "กำลังแตก live image ไปยังอุปกรณ์ USB..." + +#: ../liveusb/gui.py:180, python-format +msgid "Creating %d Mb persistent overlay..." +msgstr "กำลังสร้างที่เก็บถาวร %d Mb..." + +#: ../liveusb/gui.py:183 +msgid "Configuring and installing bootloader..." +msgstr "กำลังปรับแต่งและติดตั้ง bootloader..." + +#: ../liveusb/gui.py:187 #, python-format msgid "Complete! (%s)" msgstr "เสร็จสิ้น! (%s)" -#: ../liveusb/gui.py:207 +#: ../liveusb/gui.py:190 ../liveusb/gui.py:193 msgid "LiveUSB creation failed!" msgstr "การสร้าง LiveUSB ไม่สำเร็จ!" -#: ../liveusb/gui.py:343 -msgid "Device is not yet mounted, so we cannot determine the amount of free space. Setting a maximum limit of 8G for the persistent storage." -msgstr "อุปกรณ์ยังไม่ได้ถูกเมานต์ ดังนั้นเราไม่สามารถหาปริมาณที่ว่างได้ จะกำหนดขนาดที่เก็บถาวรสูงสุดเป็น 8G" - -#: ../liveusb/gui.py:351 -msgid "Partition is FAT16; Restricting overlay size to 2G" -msgstr "พาร์ติชั่นเป็น FAT16 จะกำหนดขนาดที่เก็บข้อมูลเป็น 2G" - -#: ../liveusb/gui.py:390 -msgid "Persistent Storage" -msgstr "ที่เก็บถาวร" - -#: ../liveusb/gui.py:412 -msgid "Unable to mount device" -msgstr "ไม่สามารถเมานต์อุปกรณ์" +#: ../liveusb/gui.py:316, python-format +msgid "Persistent Storage (%d Mb)" +msgstr "ที่เก็บข้อมูลถาวร (%d Mb)" -#: ../liveusb/gui.py:418 +#: ../liveusb/gui.py:334 msgid "" "Your device already contains a LiveOS.\n" "If you continue, this will be overwritten." @@ -68,43 +83,50 @@ msgstr "" "อุปกรณ์ของคุณมี LiveOS อยู่แล้ว\n" "ถ้าคุณทำต่อไป มันจะถูกเขียนทับ" -#: ../liveusb/gui.py:421 +#: ../liveusb/gui.py:337 msgid "Warning: Creating a new persistent overlay will delete your existing one." msgstr "คำเตือน: การสร้างที่เก็บข้อมูลจะลบอันก่อนหน้า" -#: ../liveusb/gui.py:423 +#: ../liveusb/gui.py:339 msgid "Press 'Create Live USB' again if you wish to continue." msgstr "กด 'สร้าง Live USB' อีกครั้งหากคุณต้องการทำต่อไป" -#: ../liveusb/gui.py:470 +#. The user has confirmed that they wish to overwrite their +#. existing Live OS. Here we delete it first, in order to +#. accurately calculate progress. +#: ../liveusb/gui.py:349 +msgid "Removing existing Live OS..." +msgstr "กำลังลบ Live OS ที่มีอยู่..." + +#: ../liveusb/gui.py:383 msgid "Download complete!" msgstr "ดาวน์โหลดเสร็จสิ้น!" -#: ../liveusb/gui.py:474 +#: ../liveusb/gui.py:387 msgid "Download failed: " msgstr "ดาวน์โหลดล้มเหลว:" -#: ../liveusb/gui.py:475 +#: ../liveusb/gui.py:388 msgid "You can try again to resume your download" msgstr "คุณสามารถลองอีกครั้งได้เพื่อดาวน์โหลดต่อ" -#: ../liveusb/gui.py:479 +#: ../liveusb/gui.py:392 msgid "Select Live ISO" msgstr "เลือก Live ISO" -#: ../liveusb/gui.py:486 -msgid "Unable to encode the filename of your livecd. You may have better luck if you move your ISO to the root of your drive (ie: C:\\)" -msgstr "ไม่สามารถลงรหัสชื่อไฟล์ livecd ของคุณได้ คุณอาจจะแก้ปัญหาได้หากย้าย ISO ไปยังรากของไดรฟ์ (เช่น: C:\\)" - -#: ../liveusb/gui.py:491 -msgid "selected" -msgstr "ถูกเลือก" +#: ../liveusb/gui.py:399 +msgid "" +"Sorry, I'm having trouble encoding the filename of your livecd. You may " +"have better luck if you move your ISO to the root of your drive (ie: C:\\)" +msgstr "" +"ไม่สามารถลงรหัสชื่อไฟล์ livecd ของคุณได้ คุณอาจจะแก้ปัญหาได้หากย้าย ISO ไปยังรากของไดรฟ์ " +"(เช่น: C:\\)" -#: ../liveusb/creator.py:135 -msgid "Setting up OLPC boot file..." -msgstr "กำลังติดตั้งไฟล์บูท OLPC" +#: ../liveusb/gui.py:404, python-format +msgid "ISO selected: %s" +msgstr "ISO ที่เลือก: %s" -#: ../liveusb/creator.py:188 +#: ../liveusb/creator.py:146 #, python-format msgid "" "There was a problem executing the following command: `%s`\n" @@ -113,125 +135,61 @@ msgstr "" "มีปัญหาขณะเรียกคำสั่งต่อไปนี้: `%s`\n" "ปูมโดยละเอียดถูกเขียนไว้ที่ 'liveusb-creator.log'" -#: ../liveusb/creator.py:195 -msgid "Verifying SHA1 of LiveCD image..." -msgstr "กำลังตรวจสอบ SHA1 ของอิมเมจ LiveCD..." - -#: ../liveusb/creator.py:217 -msgid "Error: The SHA1 of your Live CD is invalid. You can run this program with the --noverify argument to bypass this verification check." -msgstr "ผิดพลาด: SHA1 ของ Live CD ของคุณผิดพลาด คุณสามารถรันโปรแกรมนี้โดยใช้อากิวเมนต์ --noverify เพื่อข้ามการตรวจสอบนี้" - -#: ../liveusb/creator.py:223 -msgid "Unknown ISO, skipping checksum verification" -msgstr "ไม่รู้จัก ISO จะข้ามการตรวจสอบ checksum" - -#: ../liveusb/creator.py:234 +#: ../liveusb/creator.py:183 msgid "Not enough free space on device." msgstr "มีที่ว่างบนอุปกรณ์ไม่พอ" -#: ../liveusb/creator.py:235 -#, python-format -msgid "" -"\n" -"%dMB ISO + %dMB overlay > %dMB free space" -msgstr "" -"\n" -"%dMB ISO + ที่เก็บ %dMB > ที่ว่าง %dMB " - -#: ../liveusb/creator.py:241 -msgid "Creating" -msgstr "กำลังสร้าง" - -#: ../liveusb/creator.py:242 -msgid "persistent overlay" -msgstr "ที่เก็บถาวร" - -#: ../liveusb/creator.py:274 -msgid "Removing existing Live OS" -msgstr "กำลังลบ Live OS ที่มีอยู่" +#: ../liveusb/creator.py:190, python-format +msgid "Creating %sMB persistent overlay" +msgstr "กำลังสร้างที่เก็บถาวร %sMB" -#: ../liveusb/creator.py:283 +#: ../liveusb/creator.py:226 #, python-format msgid "Unable to remove previous LiveOS: %s" msgstr "ไม่สามารถลบ LiveOS ที่มีอยู่: %s" -#: ../liveusb/creator.py:314 +#: ../liveusb/creator.py:257 #, python-format msgid "Cannot find device %s" msgstr "ไม่สามารถหาอุปกรณ์ %s" -#: ../liveusb/creator.py:334 -msgid "Resetting MBR..." -msgstr "กำลังรีเซต MBR..." - -#: ../liveusb/creator.py:392 +#: ../liveusb/creator.py:306 msgid "Unable to find any USB drives" msgstr "ไม่สามารถหาอุปกรณ์ USB ใดๆ" -#: ../liveusb/creator.py:416 +#: ../liveusb/creator.py:327 #, python-format msgid "Filesystem for %s unknown!" msgstr "ไม่รู้จักระบบไฟล์ของ %s!" -#: ../liveusb/creator.py:417 -msgid "device" -msgstr "อุปกรณ์" - -#: ../liveusb/creator.py:429 +#: ../liveusb/creator.py:335 #, python-format msgid "Unable to mount device: %s" msgstr "ไม่สามารถเมานต์อุปกรณ์: %s" -#: ../liveusb/creator.py:466 -#: ../liveusb/creator.py:705 -msgid "Verifying filesystem..." -msgstr "กำลังตรวจสอบระบบไฟล์..." - -#: ../liveusb/creator.py:469 +#: ../liveusb/creator.py:370 #, python-format msgid "Unknown filesystem for %s. Your device may need to be reformatted." msgstr "ไม่รู้จักระบบไฟล์ของ %s อุปกรณ์ของคุณอาจจะต้องถูกฟอร์แมตซ้ำ" -#: ../liveusb/creator.py:472 +#: ../liveusb/creator.py:373 #, python-format msgid "Unsupported filesystem: %s" msgstr "ระบบไฟล์ไม่สนับสนุน: %s" -#: ../liveusb/creator.py:496 -msgid "Your MBR appears to be blank" -msgstr "MBR ของคุณเหมือนจะว่างเปล่า" - -#: ../liveusb/creator.py:506 -#: ../liveusb/creator.py:740 -msgid "Extracting live image to USB device..." -msgstr "กำลังแตก live image ไปยังอุปกรณ์ USB..." - -#: ../liveusb/creator.py:512 +#: ../liveusb/creator.py:400 msgid "Unable to find LiveOS on ISO" msgstr "ไม่สามารถหา LiveOS บน ISO" -#: ../liveusb/creator.py:524 -#: ../liveusb/creator.py:748 -msgid "Wrote to device at" -msgstr "เขียนไปยังอุปกรณ์ ณ " - -#: ../liveusb/creator.py:537 -msgid "Installing bootloader..." -msgstr "กำลังติดตั้ง bootloader..." - -#: ../liveusb/creator.py:579 -msgid "Verifying ISO MD5 checksum" -msgstr "กำลังตรวจสอบ ISO MD5 checksum" - -#: ../liveusb/creator.py:701 +#: ../liveusb/creator.py:472 msgid "Unable to find any removable devices" msgstr "ไม่สามารถหาอุปกรณ์ถอดเสียบใดๆ" -#: ../liveusb/creator.py:709 +#: ../liveusb/creator.py:479 msgid "Make sure your USB key is plugged in and formatted with the FAT filesystem" msgstr "โปรดตรวจสอบให้แน่ใจว่าได้เสียบ USB key แล้วและถูกฟอร์แมตด้วยระบบไฟล์ FAT" -#: ../liveusb/creator.py:712 +#: ../liveusb/creator.py:482 #, python-format msgid "" "Unsupported filesystem: %s\n" @@ -240,75 +198,147 @@ msgstr "" "ระบบไฟล์ไม่สนับสนุน: %s\n" "โปรดสำรองข้อมูลและฟอร์แมต USB key ด้วยระบบไฟล์แบบ FAT" -#: ../liveusb/creator.py:754 -msgid "Installing bootloader" -msgstr "กำลังติดตั้ง bootloader" - -#: ../liveusb/creator.py:798 -msgid "Cannot find" -msgstr "ไม่สามารถค้นหา" - -#: ../liveusb/creator.py:799 -msgid "Make sure to extract the entire liveusb-creator zip file before running this program." -msgstr "กรุณาแตกไฟล์ liveusb-creator.zip ทั้งไฟล์ก่อนจะรันโปรแกรมนี้" +#: ../liveusb/creator.py:558, python-format +msgid "" +"Cannot find '%s'. Make sure to extract the entire liveusb-creator zip file " +"before running this program." +msgstr "ไม่พบ '%s' กรุณาแตกไฟล์ซิป liveusb-creator ทั้งไฟล์ก่อนเรียกใช้โปรแกรมนี้" -#: ../liveusb/windows_dialog.py:104 +#: ../liveusb/dialog.py:123 msgid "Fedora LiveUSB Creator" msgstr "ตัวสร้าง Fedora LiveUSB" -#: ../liveusb/windows_dialog.py:105 -msgid "This button will begin the LiveUSB creation process. This entails optionally downloading a release (if an existing one wasn't selected), extracting the ISO to the USB device, creating the persistent overlay, and installing the bootloader." -msgstr "ปุ่มนี้จะเริ่มกระบวนการสร้าง LiveUSB โดยจะประกอบไปด้วยการดาวน์โหลดไฟล์ (ถ้าไม่ได้เลือกไฟล์ไว้), แตกไฟล์ไปยังอุปกรณ์ USB, สร้างที่เก็บข้อมูลถาวร และติดตั้ง bootloader" +#: ../liveusb/dialog.py:124 +msgid "" +"This button will begin the LiveUSB creation process. This entails " +"optionally downloading a release (if an existing one wasn't selected), " +"extracting the ISO to the USB device, creating the persistent overlay, and " +"installing the bootloader." +msgstr "" +"ปุ่มนี้จะเริ่มกระบวนการสร้าง LiveUSB โดยจะประกอบไปด้วยการดาวน์โหลดไฟล์ " +"(ถ้าไม่ได้เลือกไฟล์ไว้), แตกไฟล์ไปยังอุปกรณ์ USB, สร้างที่เก็บข้อมูลถาวร และติดตั้ง bootloader" -#: ../liveusb/windows_dialog.py:106 +#: ../liveusb/dialog.py:125 msgid "Create Live USB" msgstr "สร้าง LiveUSB" -#: ../liveusb/windows_dialog.py:107 +#: ../liveusb/dialog.py:126 msgid "This is the status console, where all messages get written to." msgstr "นี่คือคอนโซลสถานะ ซึ่งทุกข้อความจะเขียนลงในนี้" -#: ../liveusb/windows_dialog.py:108 -msgid "This is the progress bar that will indicate how far along in the LiveUSB creation process you are" +#: ../liveusb/dialog.py:127 +msgid "" +"This is the progress bar that will indicate how far along in the LiveUSB " +"creation process you are" msgstr "นี่คือแถบสถานะที่จะบอกความคืบหน้าในกระบวนการสร้าง LiveUSB" -#: ../liveusb/windows_dialog.py:109 -msgid "If you do not select an existing Live CD, the selected release will be downloaded for you." +#: ../liveusb/dialog.py:128 +msgid "" +"If you do not select an existing Live CD, the selected release will be " +"downloaded for you." msgstr "ถ้าคุณไม่ได้เลือก LiveCD ที่มีอยู่แล้ว โปรแกรมจะโหลดรุ่นที่เลือกไว้" -#: ../liveusb/windows_dialog.py:110 +#: ../liveusb/dialog.py:129 msgid "Download Fedora" msgstr "ดาวน์โหลด Fedora" -#: ../liveusb/windows_dialog.py:111 +#: ../liveusb/dialog.py:130 msgid "or" msgstr "หรือ" -#: ../liveusb/windows_dialog.py:112 -msgid "This button allows you to browse for an existing Live CD ISO that you have previously downloaded. If you do not select one, a release will be downloaded for you automatically." -msgstr "ปุ่มนี้จะให้คุณเลือกไฟล์ Live CD ISO ที่คุณได้โหลดไว้ก่อนหน้า ถ้าคุณไม่ได้เลือกโปรแกรมจะดาวน์โหลดให้คุณโดยอัตโนมัติ" +#: ../liveusb/dialog.py:131 +msgid "" +"This button allows you to browse for an existing Live CD ISO that you have " +"previously downloaded. If you do not select one, a release will be " +"downloaded for you automatically." +msgstr "" +"ปุ่มนี้จะให้คุณเลือกไฟล์ Live CD ISO ที่คุณได้โหลดไว้ก่อนหน้า " +"ถ้าคุณไม่ได้เลือกโปรแกรมจะดาวน์โหลดให้คุณโดยอัตโนมัติ" -#: ../liveusb/windows_dialog.py:113 +#: ../liveusb/dialog.py:132 msgid "Use existing Live CD" msgstr "ใช้ Live CD ที่มีอยู่" -#: ../liveusb/windows_dialog.py:114 +#: ../liveusb/dialog.py:133 msgid "Browse" msgstr "เลือกดู" -#: ../liveusb/windows_dialog.py:116 -msgid "This is the USB stick that you want to install your Live CD on. This device must be formatted with the FAT filesystem." +#: ../liveusb/dialog.py:135 +msgid "" +"This is the USB stick that you want to install your Live CD on. This device " +"must be formatted with the FAT filesystem." msgstr "นี่คือแท่ง USB ที่คุณต้องการติดตั้ง Live CD อุปกรณ์นี้จะต้องถูกฟอร์แมตในระบบไฟล์ FAT" -#: ../liveusb/windows_dialog.py:117 +#: ../liveusb/dialog.py:136 msgid "Target Device" msgstr "อุปกรณ์เป้าหมาย" -#: ../liveusb/windows_dialog.py:118 -msgid "By allocating extra space on your USB stick for a persistent overlay, you will be able to store data and make permanent modifications to your live operating system. Without it, you will not be able to save data that will persist after a reboot." -msgstr "คุณจะสามารถเก็บข้อมูลและดัดแปลงระบบของคุณได้อย่าถาวรโดยจัดสรรเนื้อที่เพิ่มเติมบนแท่ง USB ของคุณ หากไม่มีข้อมูลใดๆ ที่คุณบันทึกไว้จะหายไปหลังจากรีบูท" +#: ../liveusb/dialog.py:137 +msgid "" +"By allocating extra space on your USB stick for a persistent overlay, you " +"will be able to store data and make permanent modifications to your live " +"operating system. Without it, you will not be able to save data that will " +"persist after a reboot." +msgstr "" +"คุณจะสามารถเก็บข้อมูลและดัดแปลงระบบของคุณได้อย่าถาวรโดยจัดสรรเนื้อที่เพิ่มเติมบนแท่ง USB " +"ของคุณ หากไม่มีข้อมูลใดๆ ที่คุณบันทึกไว้จะหายไปหลังจากรีบูท" -#: ../liveusb/windows_dialog.py:119 +#: ../liveusb/dialog.py:138 msgid "Persistent Storage (0 Mb)" msgstr "ที่เก็บข้อมูลถาวร (0 Mb)" +#~ msgid "You must run this application as root" +#~ msgstr "คุณต้องรันโปรแกรมนี้เป็นรูท" + +#~ msgid "" +#~ "Device is not yet mounted, so we cannot determine the amount of free " +#~ "space. Setting a maximum limit of 8G for the persistent storage." +#~ msgstr "" +#~ "อุปกรณ์ยังไม่ได้ถูกเมานต์ ดังนั้นเราไม่สามารถหาปริมาณที่ว่างได้ " +#~ "จะกำหนดขนาดที่เก็บถาวรสูงสุดเป็น 8G" + +#~ msgid "Partition is FAT16; Restricting overlay size to 2G" +#~ msgstr "พาร์ติชั่นเป็น FAT16 จะกำหนดขนาดที่เก็บข้อมูลเป็น 2G" + +#~ msgid "Persistent Storage" +#~ msgstr "ที่เก็บถาวร" + +#~ msgid "Unable to mount device" +#~ msgstr "ไม่สามารถเมานต์อุปกรณ์" + +#~ msgid "Setting up OLPC boot file..." +#~ msgstr "กำลังติดตั้งไฟล์บูท OLPC" + +#~ msgid "Unknown ISO, skipping checksum verification" +#~ msgstr "ไม่รู้จัก ISO จะข้ามการตรวจสอบ checksum" + +#~ msgid "" +#~ "\n" +#~ "%dMB ISO + %dMB overlay > %dMB free space" +#~ msgstr "" +#~ "\n" +#~ "%dMB ISO + ที่เก็บ %dMB > ที่ว่าง %dMB " + +#~ msgid "Creating" +#~ msgstr "กำลังสร้าง" + +#~ msgid "Resetting MBR..." +#~ msgstr "กำลังรีเซต MBR..." + +#~ msgid "device" +#~ msgstr "อุปกรณ์" + +#~ msgid "Your MBR appears to be blank" +#~ msgstr "MBR ของคุณเหมือนจะว่างเปล่า" + +#~ msgid "Wrote to device at" +#~ msgstr "เขียนไปยังอุปกรณ์ ณ " + +#~ msgid "Verifying ISO MD5 checksum" +#~ msgstr "กำลังตรวจสอบ ISO MD5 checksum" + +#~ msgid "Installing bootloader" +#~ msgstr "กำลังติดตั้ง bootloader" + +#~ msgid "Cannot find" +#~ msgstr "ไม่สามารถค้นหา"

1 0

Can boot but cannot log in
by Henry Hartley 27 May '09

27 May '09

I've installed Fedora 10 (F10-i686-Live.iso) using liveusb-creator 3.6.5 to a Kingston Data Traveler (8GB). I can boot from the USB. When I choose either Boot or Verify and Boot, the process continues without error until I get to the graphical login screen. At that point, the mouse pointer moves (i.e. it isn't locked up) but nothing responds to clicks. I've tried changing the keyboard, language, or clicking on the log in button but there is no response. Some of the text on the screen is garbled and unreadable. That makes me wonder if this is a video problem. The machine (Dell Optiplex GX260) has an Intel 82845G graphics controller and is attached to a NEC MultiSync FP950 monitor. Looking at the files on the USB, however, there do not seem to be any obvious places where video settings could be changed. Likewise, there does not seem to be a way to force the system to start up in level 3 rather than level 5. I'll try booting on another machine this evening to see if it works there. Otherwise, any ideas? -- Henry

1 1

po/ca.po
by Transifex System User 20 May '09

20 May '09

po/ca.po | 345 +++++++++++++++++++++++++++++++-------------------------------- 1 file changed, 175 insertions(+), 170 deletions(-) New commits: commit c6039e3f1dfc8cab1fa347407ac72af2175d908b Author: xconde <xconde(a)fedoraproject.org> Date: Wed May 20 19:55:41 2009 +0000 Sending translation for Catalan diff --git a/po/ca.po b/po/ca.po index 2da09a0..57adb33 100644 --- a/po/ca.po +++ b/po/ca.po @@ -19,18 +19,13 @@ msgid "" msgstr "" "Project-Id-Version: liveusb-creator\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2008-10-19 02:13+0000\n" -"PO-Revision-Date: 2008-11-01 21:26+0100\n" -"Last-Translator: Agusti Grau <fletxa(a)gmail.com>\n" +"POT-Creation-Date: 2008-09-03 02:54-0400\n" +"PO-Revision-Date: 2009-05-20 22:58+0200\n" +"Last-Translator: Salva Pascual <salva(a)delleida.com>\n" "Language-Team: Fedora Softcatalà <fedora(a)softcatala.org>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"X-Poedit-Language: Catalan\n" - -#: ../liveusb/__init__.py:42 -msgid "You must run this application as root" -msgstr "Heu d'executar aquesta aplicació com a usuari root" +"Content-Transfer-Encoding: 8bit" #: ../liveusb/gui.py:69 #, python-format @@ -42,278 +37,288 @@ msgstr "Versió desconeguda: %s" msgid "Downloading %s..." msgstr "Baixant %s..." -#: ../liveusb/gui.py:156 -msgid "Error: Cannot set the label or obtain the UUID of your device. Unable to continue." -msgstr "Error: no s'ha pogut etiquetar o obtenir l'UUID del vostre dispositiu. No s'ha pogut continuar." +#: ../liveusb/gui.py:152 +msgid "Verifying filesystem..." +msgstr "Comprovant sistema de fitxers..." + +#: ../liveusb/gui.py:155 +msgid "" +"Error: Cannot set the label or obtain the UUID of your device. Unable to " +"continue." +msgstr "" +"Error: no s'ha pogut etiquetar o obtenir l'UUID del vostre dispositiu. No " +"s'ha pogut continuar." + +#: ../liveusb/gui.py:164 +msgid "Verifying SHA1 of LiveCD image..." +msgstr "Comprovant SHA1 de la imatge CD Live..." -#: ../liveusb/gui.py:185 +#: ../liveusb/gui.py:166 +msgid "" +"Error: The SHA1 of your Live CD is invalid. You can run this program with " +"the --noverify argument to bypass this verification check." +msgstr "" +"Error: El resum SHA1 del vostre CD Live és invàlid. Sisplau, executeu " +"l'aplicació amb l'argument --noverify per saltar-vos aquesta comprovació." + +#: ../liveusb/gui.py:177 +msgid "Extracting live image to USB device..." +msgstr "Extraent la imatge Live al dispositiu USB..." + +#: ../liveusb/gui.py:180 +#, python-format +msgid "Creating %d Mb persistent overlay..." +msgstr "S'està creant la capa persistent de %d Mb..." + +#: ../liveusb/gui.py:183 +msgid "Configuring and installing bootloader..." +msgstr "S'està configurant i instal·lant el carregador de l'arrencada..." + +#: ../liveusb/gui.py:187 #, python-format msgid "Complete! (%s)" msgstr "Completat! (%s)" -#: ../liveusb/gui.py:188 -#: ../liveusb/gui.py:191 +#: ../liveusb/gui.py:190 ../liveusb/gui.py:193 msgid "LiveUSB creation failed!" -msgstr "Ha fallat la creació de Live USB." +msgstr "Ha fallat la creació del Live USB." -#: ../liveusb/gui.py:331 -msgid "Persistent Storage" -msgstr "Emmagatzematge persistent" +#: ../liveusb/gui.py:316 +#, python-format +msgid "Persistent Storage (%d Mb)" +msgstr "Emmagatzematge persistent (%d Mb)" -#: ../liveusb/gui.py:349 +#: ../liveusb/gui.py:334 msgid "" "Your device already contains a LiveOS.\n" "If you continue, this will be overwritten." msgstr "" -"El vostre dispositiu ja conté un SO Live.\n" -"Si contineu, serà esborrat." +"El vostre dispositiu ja conté un SO autònom.\n" +"Si contineu, serà sobreescrit." -#: ../liveusb/gui.py:352 -msgid "Warning: Creating a new persistent overlay will delete your existing one." +#: ../liveusb/gui.py:337 +msgid "" +"Warning: Creating a new persistent overlay will delete your existing one." msgstr "Atenció: si creeu una nova capa persistent, n'esborrareu l'existent." -#: ../liveusb/gui.py:354 +#: ../liveusb/gui.py:339 msgid "Press 'Create Live USB' again if you wish to continue." msgstr "Premeu 'Crea un Live USB' un altre cop si voleu continuar." -#: ../liveusb/gui.py:400 +#. The user has confirmed that they wish to overwrite their +#. existing Live OS. Here we delete it first, in order to +#. accurately calculate progress. +#: ../liveusb/gui.py:349 +msgid "Removing existing Live OS..." +msgstr "S'està esborrant el SO existent..." + +#: ../liveusb/gui.py:383 msgid "Download complete!" msgstr "Baixada completa!" -#: ../liveusb/gui.py:404 +#: ../liveusb/gui.py:387 msgid "Download failed: " msgstr "Ha fallat la baixada:" -#: ../liveusb/gui.py:405 +#: ../liveusb/gui.py:388 msgid "You can try again to resume your download" msgstr "Podeu tornar-ho a intentar per continuar la vostra baixada" -#: ../liveusb/gui.py:409 +#: ../liveusb/gui.py:392 msgid "Select Live ISO" msgstr "Seleccioneu la ISO Live" -#: ../liveusb/gui.py:416 -msgid "Sorry, I'm having trouble encoding the filename of your livecd. You may have better luck if you move your ISO to the root of your drive (ie: C:\\)" -msgstr "S'han produït problemes codificant el nom de fitxer del vostre CD live. Sisplau, torneu-ho a intentar movent la ISO al directori arrel del vostre dispositiu (p.e. C:\\)" - -#: ../liveusb/gui.py:422 -msgid "selected" -msgstr "seleccionat" +#: ../liveusb/gui.py:399 +msgid "" +"Sorry, I'm having trouble encoding the filename of your livecd. You may " +"have better luck if you move your ISO to the root of your drive (ie: C:\\)" +msgstr "" +"S'han produït problemes codificant el nom de fitxer del vostre CD live. " +"Sisplau, torneu-ho a intentar movent la ISO al directori arrel del vostre " +"dispositiu (p.e. C:\\)" -#: ../liveusb/creator.py:128 -msgid "Setting up OLPC boot file..." -msgstr "Configurant el fitxer d'arrencada d'OLPC..." +#: ../liveusb/gui.py:404 +#, python-format +msgid "ISO selected: %s" +msgstr "ISO seleccionada: %s" -#: ../liveusb/creator.py:180 +#: ../liveusb/creator.py:146 #, python-format msgid "" "There was a problem executing the following command: `%s`\n" "A more detailed error log has been written to 'liveusb-creator.log'" -msgstr "Ha fallat l'execució de la següent ordre: %s '\n" +msgstr "" +"Ha fallat l'execució de la següent ordre: %s '\n" "S'ha creat un registre d'errors més detallat a 'liveusb-creator.log'" -#: ../liveusb/creator.py:187 -msgid "Verifying SHA1 of LiveCD image..." -msgstr "Comprovant SHA1 de la imatge CD Live..." - -#: ../liveusb/creator.py:209 -msgid "Error: The SHA1 of your Live CD is invalid. You can run this program with the --noverify argument to bypass this verification check." -msgstr "Error: El resum SHA1 del vostre CD Live és invàlid. Sisplau, executeu l'aplicació amb l'argument --noverify per saltar-vos aquesta comprovació." - -#: ../liveusb/creator.py:215 -msgid "Unknown ISO, skipping checksum verification" -msgstr "ISO desconeguda, s'està ometent la verificació de la suma de comprovació" - -#: ../liveusb/creator.py:227 +#: ../liveusb/creator.py:183 msgid "Not enough free space on device." msgstr "No disposeu de suficient espai lliure en el vostre dispositiu." -#: ../liveusb/creator.py:228 +#: ../liveusb/creator.py:190 #, python-format -msgid "" -"\n" -"%dMB ISO + %dMB overlay > %dMB free space" -msgstr "" -"\n" -"ISO %dMB + capa %dMB > espai lliure %dMB" - -#: ../liveusb/creator.py:234 -msgid "Creating" -msgstr "Creant" +msgid "Creating %sMB persistent overlay" +msgstr "S'està creant una capa persistent de %sMB " -#: ../liveusb/creator.py:235 -msgid "persistent overlay" -msgstr "capa persistent" - -#: ../liveusb/creator.py:267 -msgid "Removing existing Live OS" -msgstr "Esborrant SO Live existent" - -#: ../liveusb/creator.py:276 +#: ../liveusb/creator.py:226 #, python-format msgid "Unable to remove previous LiveOS: %s" msgstr "No s'ha pogut esborrar l'anterior SO Live: %s" -#: ../liveusb/creator.py:307 +#: ../liveusb/creator.py:257 #, python-format msgid "Cannot find device %s" msgstr "No s'ha pogut trobar el dispositiu %s" -#: ../liveusb/creator.py:356 +#: ../liveusb/creator.py:306 msgid "Unable to find any USB drives" msgstr "No s'ha pogut trobar cap unitat USB" -#: ../liveusb/creator.py:379 +#: ../liveusb/creator.py:327 #, python-format msgid "Filesystem for %s unknown!" msgstr "El sistema de fitxers de %s és desconegut." -#: ../liveusb/creator.py:380 -msgid "device" -msgstr "dispositiu" - -#: ../liveusb/creator.py:392 +#: ../liveusb/creator.py:335 #, python-format msgid "Unable to mount device: %s" msgstr "No s'ha pogut montar el dispositiu: %s" -#: ../liveusb/creator.py:428 -#: ../liveusb/creator.py:588 -msgid "Verifying filesystem..." -msgstr "Comprovant sistema de fitxers..." - -#: ../liveusb/creator.py:431 +#: ../liveusb/creator.py:370 #, python-format msgid "Unknown filesystem for %s. Your device may need to be reformatted." -msgstr "Sistema de fitxers desconegut en %s. S'haurà de reformatejar el vostre dispositiu." +msgstr "Sistema de fitxers desconegut en %s. S'haurà de reformatejar el vostre " +"dispositiu." -#: ../liveusb/creator.py:434 +#: ../liveusb/creator.py:373 #, python-format msgid "Unsupported filesystem: %s" msgstr "El sistema de fitxers de %s no està suportat." -#: ../liveusb/creator.py:458 -#: ../liveusb/creator.py:623 -msgid "Extracting live image to USB device..." -msgstr "Extraent la imatge Live al dispositiu USB..." - -#: ../liveusb/creator.py:464 +#: ../liveusb/creator.py:400 msgid "Unable to find LiveOS on ISO" msgstr "No s'ha pogut trobar cap SO Live a la ISO" -#: ../liveusb/creator.py:475 -#: ../liveusb/creator.py:630 -msgid "Wrote to device at" -msgstr "S'ha escrit al dispositiu a les" - -#: ../liveusb/creator.py:488 -msgid "Installing bootloader..." -msgstr "Instal·lant el carregador de l'arrencada..." - -#: ../liveusb/creator.py:526 -msgid "Verifying ISO MD5 checksum" -msgstr "Comprovant la suma de comprovació MD5 de la ISO" - -#: ../liveusb/creator.py:584 +#: ../liveusb/creator.py:472 msgid "Unable to find any removable devices" msgstr "No s'ha pogut trobar cap dispostiu extraïble" -#: ../liveusb/creator.py:592 -msgid "Make sure your USB key is plugged in and formatted with the FAT filesystem" -msgstr "Assegureu-vos que la vostra clau USB estigui connectada i que tingui un sistema de fitxers FAT" +#: ../liveusb/creator.py:479 +msgid "" +"Make sure your USB key is plugged in and formatted with the FAT filesystem" +msgstr "" +"Assegureu-vos que la vostra clau USB estigui connectada i que tingui un " +"sistema de fitxers FAT" -#: ../liveusb/creator.py:595 +#: ../liveusb/creator.py:482 #, python-format msgid "" "Unsupported filesystem: %s\n" "Please backup and format your USB key with the FAT filesystem." msgstr "" "El sistema de fitxers %s no està suportat\n" -"Si us plau, guardeu la informació i formategeu la clau USB amb un sistema de fitxers FAT." - -#: ../liveusb/creator.py:636 -msgid "Installing bootloader" -msgstr "Instal·lant el carregador d'arrencada" +"Si us plau, guardeu la informació i formategeu la clau USB amb un sistema de " +"fitxers FAT." -#: ../liveusb/creator.py:678 -msgid "Cannot find" -msgstr "No s'ha pogut trobar" - -#: ../liveusb/creator.py:679 -msgid "Make sure to extract the entire liveusb-creator zip file before running this program." -msgstr "Assegureu-vos d'extreure tot el fitxer zip de liveusb-creator abans d'executar el programa." +#: ../liveusb/creator.py:558 +#, python-format +msgid "" +"Cannot find '%s'. Make sure to extract the entire liveusb-creator zip file " +"before running this program." +msgstr "" +"No s'ha trobat '%s'. Assegureu-vos d'extreure tot el fitxer zip de liveusb-creator " +"abans d'executar el programa." -#: ../liveusb/linux_dialog.py:98 -#: ../liveusb/windows_dialog.py:104 +#: ../liveusb/dialog.py:123 msgid "Fedora LiveUSB Creator" msgstr "Creador de LiveUSB de Fedora" -#: ../liveusb/linux_dialog.py:99 -#: ../liveusb/windows_dialog.py:105 -msgid "This button will begin the LiveUSB creation process. This entails optionally downloading a release (if an existing one wasn't selected), extracting the ISO to the USB device, creating the persistent overlay, and installing the bootloader." -msgstr "Aquest botó començarà el procés de creació de LiveUSB. Això inclou opcionalment la baixada d'una versió (si n'existeix cap que hagueu seleccionat), l'extracció de la ISO al dispositiu USB, la creació de la capa persistent i la instal·lació del carregador d'arrencada." +#: ../liveusb/dialog.py:124 +msgid "" +"This button will begin the LiveUSB creation process. This entails " +"optionally downloading a release (if an existing one wasn't selected), " +"extracting the ISO to the USB device, creating the persistent overlay, and " +"installing the bootloader." +msgstr "" +"Aquest botó començarà el procés de creació del LiveUSB. Això inclou " +"opcionalment la baixada d'una versió (si n'existeix cap que hagueu " +"seleccionat), l'extracció de la ISO al dispositiu USB, la creació de la capa " +"persistent i la instal·lació del carregador d'arrencada." -#: ../liveusb/linux_dialog.py:100 -#: ../liveusb/windows_dialog.py:106 +#: ../liveusb/dialog.py:125 msgid "Create Live USB" msgstr "Crea USB Live" -#: ../liveusb/linux_dialog.py:101 -#: ../liveusb/windows_dialog.py:107 +#: ../liveusb/dialog.py:126 msgid "This is the status console, where all messages get written to." msgstr "Aquesta és la consola d'estat, on s'escriuen tots els missatges." -#: ../liveusb/linux_dialog.py:102 -#: ../liveusb/windows_dialog.py:108 -msgid "This is the progress bar that will indicate how far along in the LiveUSB creation process you are" -msgstr "Aquesta és la barra de progrés que us indicarà el progrés actual dins el procés de creació de LiveUSB" +#: ../liveusb/dialog.py:127 +msgid "" +"This is the progress bar that will indicate how far along in the LiveUSB " +"creation process you are" +msgstr "" +"Aquesta és la barra de progrés que us indicarà el progrés actual dins el " +"procés de creació de LiveUSB" -#: ../liveusb/linux_dialog.py:103 -#: ../liveusb/windows_dialog.py:109 -msgid "If you do not select an existing Live CD, the selected release will be downloaded for you." -msgstr "Si no seleccioneu un CD Live existent, es descarrregarà la versió seleccionada automàticament." +#: ../liveusb/dialog.py:128 +msgid "" +"If you do not select an existing Live CD, the selected release will be " +"downloaded for you." +msgstr "" +"Si no seleccioneu un CD Live existent, es descarrregarà la versió " +"seleccionada automàticament." -#: ../liveusb/linux_dialog.py:104 -#: ../liveusb/windows_dialog.py:110 +#: ../liveusb/dialog.py:129 msgid "Download Fedora" msgstr "Baixa Fedora" -#: ../liveusb/linux_dialog.py:105 -#: ../liveusb/windows_dialog.py:111 +#: ../liveusb/dialog.py:130 msgid "or" msgstr "o" -#: ../liveusb/linux_dialog.py:106 -#: ../liveusb/windows_dialog.py:112 -msgid "This button allows you to browse for an existing Live CD ISO that you have previously downloaded. If you do not select one, a release will be downloaded for you automatically." -msgstr "Aquest botó us permet navegar per una ISO existent de CD Live que hareu baixat anteriorment. Si no seleccioneu cap, es baixarà una versió automàticament." +#: ../liveusb/dialog.py:131 +msgid "" +"This button allows you to browse for an existing Live CD ISO that you have " +"previously downloaded. If you do not select one, a release will be " +"downloaded for you automatically." +msgstr "" +"Aquest botó us permet navegar per una ISO existent de CD Live que hareu " +"baixat anteriorment. Si no seleccioneu cap, es baixarà una versió " +"automàticament." -#: ../liveusb/linux_dialog.py:107 -#: ../liveusb/windows_dialog.py:113 +#: ../liveusb/dialog.py:132 msgid "Use existing Live CD" msgstr "Utilitza una imatge de CD Live existent." -#: ../liveusb/linux_dialog.py:108 -#: ../liveusb/windows_dialog.py:114 +#: ../liveusb/dialog.py:133 msgid "Browse" msgstr "Navega" -#: ../liveusb/linux_dialog.py:110 -#: ../liveusb/windows_dialog.py:116 -msgid "This is the USB stick that you want to install your Live CD on. This device must be formatted with the FAT filesystem." -msgstr "Aquesta és la clau USB que heu seleccionat per instal·lar la vostra imatge CD Live. Aquest dispositiu ha d'estar formatat amb el sistema de fitxers FAT." +#: ../liveusb/dialog.py:135 +msgid "" +"This is the USB stick that you want to install your Live CD on. This device " +"must be formatted with the FAT filesystem." +msgstr "" +"Aquesta és la clau USB que heu seleccionat per instal·lar la vostra imatge " +"CD Live. Aquest dispositiu ha d'estar formatat amb el sistema de fitxers FAT." + +#: ../liveusb/dialog.py:136 +msgid "Target Device" +msgstr "Dispositiu destí" -#: ../liveusb/linux_dialog.py:112 -#: ../liveusb/windows_dialog.py:118 -msgid "By allocating extra space on your USB stick for a persistent overlay, you will be able to store data and make permanent modifications to your live operating system. Without it, you will not be able to save data that will persist after a reboot." -msgstr "Podreu desar dades i fer modificacions permanents en el sistema operatiu Live allotjant espai extra en la vostra clau USB per a una capa persistent. Sense aquesta, no podreu desar dades que persisteixin després de reiniciar." +#: ../liveusb/dialog.py:137 +msgid "" +"By allocating extra space on your USB stick for a persistent overlay, you " +"will be able to store data and make permanent modifications to your live " +"operating system. Without it, you will not be able to save data that will " +"persist after a reboot." +msgstr "" +"Podreu desar dades i fer modificacions permanents en el sistema operatiu " +"Live allotjant espai extra en la vostra clau USB per a una capa persistent. " +"Sense ella, no podreu desar dades que persisteixin després de reiniciar. " -#: ../liveusb/linux_dialog.py:113 -#: ../liveusb/windows_dialog.py:119 +#: ../liveusb/dialog.py:138 msgid "Persistent Storage (0 Mb)" msgstr "Emmagatzematge persistent (0 Mb)" -#: ../liveusb/windows_dialog.py:117 -msgid "Target Device" -msgstr "Dispositiu destí" -

1 0

my wish/tip
by Kuba Zizzfizzix 17 May '09

17 May '09

Heya Guys! First of all, thanks, thanks for a working tool :) Second, I wish I could see an option (or a checkbox in GUI) for checking SHA1 checksum. Now it's default that it checks it, but I've copied one .iso file several times, and each I had to wait (about 5 minutes...) for it to check integrity. Cheers, Kuba! P.S. I'm not subscribed so please forward any message to me.

1 0

VMPlayer how do I install it on Fedora 11 Preview?
by Live session user 15 May '09

15 May '09

How do I install VMPlayer on Fedora 11 Preview? I get a kernel headers missing error on attempting to install VMPlayer 6.5.2. I am testing using VMPlayer to open Appliances created with VMWorkstation on a 8 GB USB stick with 2 partitions 2GB fat 16 boot flag with live image created with liveusb creator 5GB fat 32 boot flag containing the VMware appliance I am writing this with thunderbird installed on Ubuntu 9.04 on such a stick. It has VMPlayer installed on the first 2 GB partition and 3.0GB Appliance of Fedora 11 0.93 with (Gnome and Sugar desktops) on the second 5GB partition. It boots and runs well on a EeePC900 netbook wirelessly as live user. This is a practical way to have these programs as a bootable second OS on a stick. This works using Ubuntu 9.04 usb boot program because VMPlayer installs I would rather use Fedora as the underlying OS. How can this be accomplished? Tom

1 0

po/el.po
by Transifex System User 11 May '09

11 May '09

po/el.po | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) New commits: commit 5c7f54ba9340d1f653c801ab9871caa8b3c0119f Author: ppapadeas <ppapadeas(a)fedoraproject.org> Date: Mon May 11 11:45:56 2009 +0000 Sending translation for Greek diff --git a/po/el.po b/po/el.po index 59ec661..de74be1 100644 --- a/po/el.po +++ b/po/el.po @@ -9,7 +9,7 @@ msgstr "" "Project-Id-Version: el\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-09-03 02:54-0400\n" -"PO-Revision-Date: 2009-05-11 14:10+0200\n" +"PO-Revision-Date: 2009-05-11 14:44+0200\n" "Last-Translator: Pierros Papadeas <ppapadeas(a)gmail.com>\n" "Language-Team: Greek <team(a)gnome.gr>\n" "MIME-Version: 1.0\n" @@ -36,7 +36,7 @@ msgstr "" #: ../liveusb/gui.py:164 msgid "Verifying SHA1 of LiveCD image..." -msgstr "" +msgstr "Επιβεβαίωση SHA1 της ζωντανής εικόνας CD..." #: ../liveusb/gui.py:166 msgid "Error: The SHA1 of your Live CD is invalid. You can run this program with the --noverify argument to bypass this verification check." @@ -49,7 +49,7 @@ msgstr "Εξαγωγή ζωντανής εικόνας στην συσκευή U #: ../liveusb/gui.py:180 #, python-format msgid "Creating %d Mb persistent overlay..." -msgstr "" +msgstr "Δημιουργία %d Mb μόνιμου χώρου..." #: ../liveusb/gui.py:183 msgid "Configuring and installing bootloader..." @@ -78,11 +78,11 @@ msgstr "" #: ../liveusb/gui.py:337 msgid "Warning: Creating a new persistent overlay will delete your existing one." -msgstr "" +msgstr "Προσοχή: Η δημιουργία μόνιμου χώρου θα διαγράψει τον ήδη υπάρχοντα." #: ../liveusb/gui.py:339 msgid "Press 'Create Live USB' again if you wish to continue." -msgstr "" +msgstr "Πατήστε 'Δημιουργία Ζωντανού USB' ξανά αν επιθυμείτε να συνεχίσετε." #. The user has confirmed that they wish to overwrite their #. existing Live OS. Here we delete it first, in order to @@ -101,7 +101,7 @@ msgstr "Η λήψη απέτυχε:" #: ../liveusb/gui.py:388 msgid "You can try again to resume your download" -msgstr "" +msgstr "Μπορείτε να δοκιμάσετε να ξαναξεκινήσετε την λήψη σας" #: ../liveusb/gui.py:392 msgid "Select Live ISO" @@ -130,12 +130,12 @@ msgstr "Δεν υπάρχει αρκετός διαθέσιμος χώρος σ #: ../liveusb/creator.py:190 #, python-format msgid "Creating %sMB persistent overlay" -msgstr "" +msgstr "Δημιουργία %sΜΒ μόνιμης μνήμης" #: ../liveusb/creator.py:226 #, python-format msgid "Unable to remove previous LiveOS: %s" -msgstr "" +msgstr "Αδυναμία αφαίρεσης προηγούμενου ζωντανού ΛΣ: %s" #: ../liveusb/creator.py:257 #, python-format @@ -176,7 +176,7 @@ msgstr "Αδυναμία εύρεσης αφαιρούμενων συσκευώ #: ../liveusb/creator.py:479 msgid "Make sure your USB key is plugged in and formatted with the FAT filesystem" -msgstr "" +msgstr "Σιγουρευτείτε ότι το USB stick σας είναι συνδεδεμένο και διαμορφωμένο σε σύστημα αρχείων FAT" #: ../liveusb/creator.py:482 #, python-format @@ -204,7 +204,7 @@ msgstr "Δημιουργία Ζωντανού USB" #: ../liveusb/dialog.py:126 msgid "This is the status console, where all messages get written to." -msgstr "" +msgstr "Αυτή είναι η κονσόλα κατάστασης, όπου γράφονται όλα τα μηνύματα." #: ../liveusb/dialog.py:127 msgid "This is the progress bar that will indicate how far along in the LiveUSB creation process you are"

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

liveusb-creator May 2009