[PATCH v1] regression-tests: Add nperf_cpu_util alias to Python tasks

[Jiri Prochazka]

This patch adds alias nperf_cpu_util, which is used in netperf test module for
enabling local/remote/both CPU utilization measure. When the value is different
from these three, no CPU utilization measure will be enabled.

Signed-off-by: Jiri Prochazka <jprochaz(a)redhat.com&gt;
---
 recipes/regression_tests/phase1/3_vlans.py                  | 13 +++++++++----
 recipes/regression_tests/phase1/3_vlans_over_bond.py        | 13 +++++++++----
 recipes/regression_tests/phase1/bonding_test.py             |  5 +++++
 .../phase1/virtual_bridge_2_vlans_over_bond.py              |  5 +++++
 .../regression_tests/phase1/virtual_bridge_vlan_in_guest.py |  5 +++++
 .../regression_tests/phase1/virtual_bridge_vlan_in_host.py  |  5 +++++
 recipes/regression_tests/phase2/3_vlans_over_team.py        | 13 +++++++++----
 recipes/regression_tests/phase2/team_test.py                |  5 +++++
 .../virtual_ovs_bridge_2_vlans_over_active_backup_bond.py   |  5 +++++
 .../phase2/virtual_ovs_bridge_vlan_in_guest.py              |  5 +++++
 .../phase2/virtual_ovs_bridge_vlan_in_host.py               |  5 +++++
 11 files changed, 67 insertions(+), 12 deletions(-)

diff --git a/recipes/regression_tests/phase1/3_vlans.py
b/recipes/regression_tests/phase1/3_vlans.py
index c4d229b..69b958e 100644
--- a/recipes/regression_tests/phase1/3_vlans.py
+++ b/recipes/regression_tests/phase1/3_vlans.py
@@ -37,6 +37,7 @@ nperf_reserve = int(ctl.get_alias("nperf_reserve"))
 nperf_confidence = ctl.get_alias("nperf_confidence")
 nperf_max_runs = int(ctl.get_alias("nperf_max_runs"))
 nperf_cpupin = ctl.get_alias("nperf_cpupin")
+nperf_cpu_util = ctl.get_alias("nperf_cpu_util")
 
 m1_phy1 = m1.get_interface("eth1")
 m1_phy1.set_mtu(mtu)
@@ -75,28 +76,32 @@ netperf_cli_tcp = ctl.get_module("Netperf",
                                       "role" : "client",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
-                                      "confidence" : nperf_confidence
+                                      "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util
                                   })
 netperf_cli_udp = ctl.get_module("Netperf",
                                   options={
                                       "role" : "client",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
-                                      "confidence" : nperf_confidence
+                                      "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util
                                   })
 netperf_cli_tcp6 = ctl.get_module("Netperf",
                                   options={
                                       "role" : "client",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
-                                      "confidence" : nperf_confidence
+                                      "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util
                                   })
 netperf_cli_udp6 = ctl.get_module("Netperf",
                                   options={
                                       "role" : "client",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
-                                      "confidence" : nperf_confidence
+                                      "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util
                                   })
 
 for vlan1 in vlans:
diff --git a/recipes/regression_tests/phase1/3_vlans_over_bond.py
b/recipes/regression_tests/phase1/3_vlans_over_bond.py
index e998480..adaf426 100644
--- a/recipes/regression_tests/phase1/3_vlans_over_bond.py
+++ b/recipes/regression_tests/phase1/3_vlans_over_bond.py
@@ -36,6 +36,7 @@ nperf_reserve = int(ctl.get_alias("nperf_reserve"))
 nperf_confidence = ctl.get_alias("nperf_confidence")
 nperf_max_runs = int(ctl.get_alias("nperf_max_runs"))
 nperf_cpupin = ctl.get_alias("nperf_cpupin")
+nperf_cpu_util = ctl.get_alias("nperf_cpu_util")
 
 m1_bond = m1.get_interface("test_bond")
 m1_bond.set_mtu(mtu)
@@ -76,28 +77,32 @@ netperf_cli_tcp = ctl.get_module("Netperf",
                                       "role" : "client",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
-                                      "confidence" : nperf_confidence
+                                      "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util
                                   })
 netperf_cli_udp = ctl.get_module("Netperf",
                                   options={
                                       "role" : "client",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
-                                      "confidence" : nperf_confidence
+                                      "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util
                                   })
 netperf_cli_tcp6 = ctl.get_module("Netperf",
                                   options={
                                       "role" : "client",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
-                                      "confidence" : nperf_confidence
+                                      "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util
                                   })
 netperf_cli_udp6 = ctl.get_module("Netperf",
                                   options={
                                       "role" : "client",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
-                                      "confidence" : nperf_confidence
+                                      "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util
                                   })
 
 for vlan1 in vlans:
diff --git a/recipes/regression_tests/phase1/bonding_test.py
b/recipes/regression_tests/phase1/bonding_test.py
index 8909ca0..b73f0dc 100644
--- a/recipes/regression_tests/phase1/bonding_test.py
+++ b/recipes/regression_tests/phase1/bonding_test.py
@@ -36,6 +36,7 @@ nperf_reserve = int(ctl.get_alias("nperf_reserve"))
 nperf_confidence = ctl.get_alias("nperf_confidence")
 nperf_max_runs = int(ctl.get_alias("nperf_max_runs"))
 nperf_cpupin = ctl.get_alias("nperf_cpupin")
+nperf_cpu_util = ctl.get_alias("nperf_cpu_util")
 
 test_if1 = m1.get_interface("test_if")
 test_if1.set_mtu(mtu)
@@ -82,6 +83,7 @@ netperf_cli_tcp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : p_opts
                                 })
 
@@ -92,6 +94,7 @@ netperf_cli_udp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : p_opts
                                   })
 
@@ -103,6 +106,7 @@ netperf_cli_tcp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
test_if2.get_ip(1))
                                   })
@@ -114,6 +118,7 @@ netperf_cli_udp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
test_if2.get_ip(1))
                                   })
diff --git a/recipes/regression_tests/phase1/virtual_bridge_2_vlans_over_bond.py
b/recipes/regression_tests/phase1/virtual_bridge_2_vlans_over_bond.py
index 8b580a9..4ad0dc9 100644
--- a/recipes/regression_tests/phase1/virtual_bridge_2_vlans_over_bond.py
+++ b/recipes/regression_tests/phase1/virtual_bridge_2_vlans_over_bond.py
@@ -41,6 +41,7 @@ netperf_duration = int(ctl.get_alias("netperf_duration"))
 nperf_reserve = int(ctl.get_alias("nperf_reserve"))
 nperf_confidence = ctl.get_alias("nperf_confidence")
 nperf_max_runs = int(ctl.get_alias("nperf_max_runs"))
+nperf_cpu_util = ctl.get_alias("nperf_cpu_util")
 
 mtu = ctl.get_alias("mtu")
 enable_udp_perf = ctl.get_alias("enable_udp_perf")
@@ -105,6 +106,7 @@ netperf_cli_tcp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : "-i %s -L %s"
%
                                                           (nperf_max_runs,
g3_guestnic.get_ip(0))
                                   })
@@ -116,6 +118,7 @@ netperf_cli_udp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : "-i %s -L %s"
%
                                                           (nperf_max_runs,
g3_guestnic.get_ip(0))
                                   })
@@ -128,6 +131,7 @@ netperf_cli_tcp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
g3_guestnic.get_ip(1))
                                   })
@@ -140,6 +144,7 @@ netperf_cli_udp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
g3_guestnic.get_ip(1))
                                   })
diff --git a/recipes/regression_tests/phase1/virtual_bridge_vlan_in_guest.py
b/recipes/regression_tests/phase1/virtual_bridge_vlan_in_guest.py
index de46b51..ec2400b 100644
--- a/recipes/regression_tests/phase1/virtual_bridge_vlan_in_guest.py
+++ b/recipes/regression_tests/phase1/virtual_bridge_vlan_in_guest.py
@@ -37,6 +37,7 @@ nperf_reserve = int(ctl.get_alias("nperf_reserve"))
 nperf_confidence = ctl.get_alias("nperf_confidence")
 nperf_max_runs = int(ctl.get_alias("nperf_max_runs"))
 nperf_cpupin = ctl.get_alias("nperf_cpupin")
+nperf_cpu_util = ctl.get_alias("nperf_cpu_util")
 
 mtu = ctl.get_alias("mtu")
 enable_udp_perf = ctl.get_alias("enable_udp_perf")
@@ -87,6 +88,7 @@ netperf_cli_tcp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : p_opts
                                   })
 
@@ -97,6 +99,7 @@ netperf_cli_udp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : p_opts
                                   })
 
@@ -108,6 +111,7 @@ netperf_cli_tcp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
h2_vlan10.get_ip(1))
                                   })
@@ -120,6 +124,7 @@ netperf_cli_udp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
h2_vlan10.get_ip(1))
                                   })
diff --git a/recipes/regression_tests/phase1/virtual_bridge_vlan_in_host.py
b/recipes/regression_tests/phase1/virtual_bridge_vlan_in_host.py
index 1ea1d46..8b235f8 100644
--- a/recipes/regression_tests/phase1/virtual_bridge_vlan_in_host.py
+++ b/recipes/regression_tests/phase1/virtual_bridge_vlan_in_host.py
@@ -37,6 +37,7 @@ nperf_reserve = int(ctl.get_alias("nperf_reserve"))
 nperf_confidence = ctl.get_alias("nperf_confidence")
 nperf_max_runs = int(ctl.get_alias("nperf_max_runs"))
 nperf_cpupin = ctl.get_alias("nperf_cpupin")
+nperf_cpu_util = ctl.get_alias("nperf_cpu_util")
 
 mtu = ctl.get_alias("mtu")
 enable_udp_perf = ctl.get_alias("enable_udp_perf")
@@ -86,6 +87,7 @@ netperf_cli_tcp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : p_opts
                                   })
 
@@ -96,6 +98,7 @@ netperf_cli_udp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : p_opts
                                   })
 
@@ -107,6 +110,7 @@ netperf_cli_tcp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
h2_vlan10.get_ip(1))
                                   })
@@ -119,6 +123,7 @@ netperf_cli_udp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
h2_vlan10.get_ip(1))
                                   })
diff --git a/recipes/regression_tests/phase2/3_vlans_over_team.py
b/recipes/regression_tests/phase2/3_vlans_over_team.py
index de7f955..5855915 100644
--- a/recipes/regression_tests/phase2/3_vlans_over_team.py
+++ b/recipes/regression_tests/phase2/3_vlans_over_team.py
@@ -36,6 +36,7 @@ nperf_reserve = int(ctl.get_alias("nperf_reserve"))
 nperf_confidence = ctl.get_alias("nperf_confidence")
 nperf_max_runs = int(ctl.get_alias("nperf_max_runs"))
 nperf_cpupin = ctl.get_alias("nperf_cpupin")
+nperf_cpu_util = ctl.get_alias("nperf_cpu_util")
 
 m1_team = m1.get_interface("test_if")
 m1_team.set_mtu(mtu)
@@ -77,28 +78,32 @@ netperf_cli_tcp = ctl.get_module("Netperf",
                                       "role" : "client",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
-                                      "confidence" : nperf_confidence
+                                      "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util
                                   })
 netperf_cli_udp = ctl.get_module("Netperf",
                                   options={
                                       "role" : "client",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
-                                      "confidence" : nperf_confidence
+                                      "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util
                                   })
 netperf_cli_tcp6 = ctl.get_module("Netperf",
                                   options={
                                       "role" : "client",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
-                                      "confidence" : nperf_confidence
+                                      "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util
                                   })
 netperf_cli_udp6 = ctl.get_module("Netperf",
                                   options={
                                       "role" : "client",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
-                                      "confidence" : nperf_confidence
+                                      "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util
                                   })
 
 for vlan1 in vlans:
diff --git a/recipes/regression_tests/phase2/team_test.py
b/recipes/regression_tests/phase2/team_test.py
index 50e8364..4897d8d 100644
--- a/recipes/regression_tests/phase2/team_test.py
+++ b/recipes/regression_tests/phase2/team_test.py
@@ -35,6 +35,7 @@ nperf_reserve = int(ctl.get_alias("nperf_reserve"))
 nperf_confidence = ctl.get_alias("nperf_confidence")
 nperf_max_runs = int(ctl.get_alias("nperf_max_runs"))
 nperf_cpupin = ctl.get_alias("nperf_cpupin")
+nperf_cpu_util = ctl.get_alias("nperf_cpu_util")
 
 test_if1 = m1.get_interface("test_if")
 test_if1.set_mtu(mtu)
@@ -82,6 +83,7 @@ netperf_cli_tcp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : p_opts
                                 })
 
@@ -92,6 +94,7 @@ netperf_cli_udp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : p_opts
                                   })
 
@@ -103,6 +106,7 @@ netperf_cli_tcp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
test_if2.get_ip(1))
                                   })
@@ -114,6 +118,7 @@ netperf_cli_udp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
test_if2.get_ip(1))
                                   })
diff --git
a/recipes/regression_tests/phase2/virtual_ovs_bridge_2_vlans_over_active_backup_bond.py
b/recipes/regression_tests/phase2/virtual_ovs_bridge_2_vlans_over_active_backup_bond.py
index 6f02921..521b268 100644
---
a/recipes/regression_tests/phase2/virtual_ovs_bridge_2_vlans_over_active_backup_bond.py
+++
b/recipes/regression_tests/phase2/virtual_ovs_bridge_2_vlans_over_active_backup_bond.py
@@ -41,6 +41,7 @@ netperf_duration = int(ctl.get_alias("netperf_duration"))
 nperf_reserve = int(ctl.get_alias("nperf_reserve"))
 nperf_confidence = ctl.get_alias("nperf_confidence")
 nperf_max_runs = int(ctl.get_alias("nperf_max_runs"))
+nperf_cpu_util = ctl.get_alias("nperf_cpu_util")
 
 h1_nic1 = h1.get_interface("nic1")
 h1_nic2 = h1.get_interface("nic2")
@@ -103,6 +104,7 @@ netperf_cli_tcp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : "-i %s -L %s"
%
                                                           (nperf_max_runs,
g3_guestnic.get_ip(0))
                                   })
@@ -114,6 +116,7 @@ netperf_cli_udp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : "-i %s -L %s"
%
                                                           (nperf_max_runs,
g3_guestnic.get_ip(0))
                                   })
@@ -126,6 +129,7 @@ netperf_cli_tcp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
g3_guestnic.get_ip(1))
                                   })
@@ -138,6 +142,7 @@ netperf_cli_udp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
g3_guestnic.get_ip(1))
                                   })
diff --git a/recipes/regression_tests/phase2/virtual_ovs_bridge_vlan_in_guest.py
b/recipes/regression_tests/phase2/virtual_ovs_bridge_vlan_in_guest.py
index 32c1335..27bc63b 100644
--- a/recipes/regression_tests/phase2/virtual_ovs_bridge_vlan_in_guest.py
+++ b/recipes/regression_tests/phase2/virtual_ovs_bridge_vlan_in_guest.py
@@ -37,6 +37,7 @@ nperf_reserve = int(ctl.get_alias("nperf_reserve"))
 nperf_confidence = ctl.get_alias("nperf_confidence")
 nperf_max_runs = int(ctl.get_alias("nperf_max_runs"))
 nperf_cpupin = ctl.get_alias("nperf_cpupin")
+nperf_cpu_util = ctl.get_alias("nperf_cpu_util")
 
 h2_vlan10 = h2.get_interface("vlan10")
 g1_vlan10 = g1.get_interface("vlan10")
@@ -84,6 +85,7 @@ netperf_cli_tcp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : p_opts
                                   })
 
@@ -94,6 +96,7 @@ netperf_cli_udp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : p_opts
                                   })
 
@@ -105,6 +108,7 @@ netperf_cli_tcp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
h2_vlan10.get_ip(1))
                                   })
@@ -117,6 +121,7 @@ netperf_cli_udp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
h2_vlan10.get_ip(1))
                               })
diff --git a/recipes/regression_tests/phase2/virtual_ovs_bridge_vlan_in_host.py
b/recipes/regression_tests/phase2/virtual_ovs_bridge_vlan_in_host.py
index 209b85a..3284851 100644
--- a/recipes/regression_tests/phase2/virtual_ovs_bridge_vlan_in_host.py
+++ b/recipes/regression_tests/phase2/virtual_ovs_bridge_vlan_in_host.py
@@ -37,6 +37,7 @@ nperf_reserve = int(ctl.get_alias("nperf_reserve"))
 nperf_confidence = ctl.get_alias("nperf_confidence")
 nperf_max_runs = int(ctl.get_alias("nperf_max_runs"))
 nperf_cpupin = ctl.get_alias("nperf_cpupin")
+nperf_cpu_util = ctl.get_alias("nperf_cpu_util")
 
 h2_vlan10 = h2.get_interface("vlan10")
 g1_guestnic = g1.get_interface("guestnic")
@@ -83,6 +84,7 @@ netperf_cli_tcp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : p_opts
                                   })
 
@@ -93,6 +95,7 @@ netperf_cli_udp = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" : p_opts
                                   })
 
@@ -104,6 +107,7 @@ netperf_cli_tcp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "TCP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
h2_vlan10.get_ip(1))
                                   })
@@ -116,6 +120,7 @@ netperf_cli_udp6 = ctl.get_module("Netperf",
                                       "duration" : netperf_duration,
                                       "testname" : "UDP_STREAM",
                                       "confidence" : nperf_confidence,
+                                      "cpu_util" : nperf_cpu_util,
                                       "netperf_opts" :
                                           "-i %s -L %s -6" % (nperf_max_runs,
h2_vlan10.get_ip(1))
                                   })
-- 
2.4.3