57 June 2018

magazine@lists.fedoraproject.org

29 participants
42 discussions

Regarding Buildah article - Part II
by Ashutosh Bhakare 27 Jan '20

27 Jan '20

Hello All Planning to write an extension of my previous article on buildah based on below points 1) Using Docker file to create image 2) using buildah bud to allocate cpu, memory limits 3) mounting volumes using buildah command 4) buildah commit 5) buildah copy Looking for approval and suggestions Thanks Ashutosh

3 3

Re: Article draft: Fleet Commander
by Oliver Gutierrez 07 Nov '19

07 Nov '19

Hi there. I've modified the article with all the fantastic suggestions by Dale Raby. Also I've removed the duplicated content and converted the document to ODF, PDF and txt for people with slow computers or no google account. Thanks for all and regards. On Tue, Jun 26, 2018 at 10:45 AM Oliver Gutierrez <ogutierrez(a)redhat.com> wrote: > Thank you very much Dale. I'm fixing the whole things you pointed. Almost > all of them make sense from the IT part. :) > > I will finish the modifications maybe today or tomorrown and I will change > the document to a text document so you can review it better :) > > Thanks for your help and your time! > > On Sat, Jun 23, 2018 at 4:53 AM Dale Raby <daleraby(a)gmail.com> wrote: > >> Just put in some suggestions. Your English is better than my Spanish but >> I found a few minor grammatical errors. >> >> The biggest problem I found was that there seems to be a large block of >> text that is a duplication. The section with the graphics is difficult for >> me to view with my slow connection here. >> >> Google documents are always difficult for me to edit. Google assumes >> that everyone has very fast connections and modern machines. I have >> neither. It put me into "suggestion mode", which is actually very clever >> of them... if only I had a fast connection! >> >> Bear in mind, that while I am a native speaker of English and have >> actually done quite a bit of writing, I am NOT an IT expert. So.... take >> any suggestions I give you with caution. I could be misunderstanding your >> intent. >> >> I will look at this again tomorrow when I am not half asleep. Neighbor's >> cattle (Herfords, two heifers, a calf and a 1,200 pound bull) got out onto >> the road this evening. I and former US Congressman Alan Lasee helped a >> police officer and the owner get them back into the enclosure. Was quite >> enough excitement for me! >> >> Dale >> >> On Fri, Jun 22, 2018 at 4:14 PM, Oliver Gutierrez <ogutierrez(a)redhat.com> >> wrote: >> >>> Thank you very much Mr Raby! Just give me the time to separate it in >>> sections (so I will need to ad intros and outros for each block) and after >>> that I will need a review. >>> >>> In the meantime, I will give you the access you required :) >>> >>> You just need to access the document in this URL >>> >>> >>> https://docs.google.com/document/d/1VpQhEoTXUkrzTxxVLxLED3IkZL_Lj3JptZ5m1FM… >>> >>> Then Google will allow you to ask for document access and I will receive >>> a notification to give you the permissions. >>> >>> If you do that and you see I had not answered or allowed, please tell me >>> because maybe the notification is lost in my inbox. >>> >>> Again thanks. >>> >>> >>> P.D. Swear words in spanish are usually enough to be very communicative >>> of your current mood :P >>> >>> P.D. 2: After trying to send this email again, google asked me to give >>> automatic access to view the document to recipients, so maybe you will be >>> able to see it after receiving this. >>> >>> >>> On Fri, Jun 22, 2018 at 4:35 PM Dale Raby <daleraby(a)gmail.com> wrote: >>> >>>> Senor Gutierrez: >>>> >>>> I will be happy to look over your article(s) and address any linguistic >>>> issues. I speak English quite well, German OK, but my Spanish is >>>> limited >>>> to swear words my Puerto Rican roommate taught me during my army days. >>>> >>>> I need permission to access your document though. >>>> >>>> Dale >>>> >>>> On Fri, Jun 22, 2018 at 6:50 AM, Oliver Gutierrez < >>>> ogutierrez(a)redhat.com> >>>> wrote: >>>> >>>> > Yeah, I can do that. Just give me some time to do it and I can >>>> separate >>>> > them into more "atomic" pieces :) >>>> > >>>> > Thanks for reviewing! >>>> > >>>> > >>>> > On Fri, Jun 22, 2018 at 2:16 AM Paul Frields <stickster(a)gmail.com> >>>> wrote: >>>> > >>>> > > On Thu, Jun 7, 2018 at 1:06 PM Oliver Gutierrez < >>>> ogutierrez(a)redhat.com> >>>> > > wrote: >>>> > > > >>>> > > > Hi there. >>>> > > > >>>> > > > Here it is the Fleet Commander draft article I promised to Paul >>>> for >>>> > > review. >>>> > > > >>>> > > > >>>> > > https://docs.google.com/document/d/1VpQhEoTXUkrzTxxVLxLED3IkZL_ >>>> > Lj3JptZ5m1FMDRHU/edit?usp=sharing >>>> > > > >>>> > > > Please, tell me whatever change you want to enhance it and as >>>> English >>>> > is >>>> > > > not my mother language, any suggestion, correction etc. is most >>>> > welcome. >>>> > > >>>> > > Hi Oliver, >>>> > > >>>> > > There's a LOT of good material here! However, 13 pages is just too >>>> > > long for a Magazine article. (Although your document looks like it >>>> > > might duplicate material, and it might be 6.5 pages * 2.) Can you >>>> > > consider cutting this up into a couple articles? They could run like >>>> > > this: >>>> > > >>>> > > * What is FC and how do you install it? >>>> > > * Setting up a test environment and showing how to set up a profile >>>> > > >>>> > > -- >>>> > > Paul >>>> > > >>>> > _______________________________________________ >>>> > Fedora Magazine mailing list -- magazine(a)lists.fedoraproject.org >>>> > To unsubscribe send an email to >>>> magazine-leave(a)lists.fedoraproject.org >>>> > Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html >>>> > List Guidelines: >>>> https://fedoraproject.org/wiki/Mailing_list_guidelines >>>> > List Archives: >>>> https://lists.fedoraproject.org/archives/list/magazine@ >>>> > lists.fedoraproject.org/message/7DXFRUSQMU3UQCVXLUE67ZZBKPWXPYFX/ >>>> > >>>> >>>> >>>> >>>> -- >>>> >>>> >>>> >>>> *Buy my books! The Wives of Jacob, Book I, In the Beginning, The >>>> Post-Apocalyptic Blacksmith, 777 Bon Mots for Gunslingers and Other Real >>>> Men, available at most on-line booksellers in multiple formats.Note: >>>> The >>>> People of Jacb, Book II, In the Middle is currently being copy-editedand >>>> should be out soon. Just Google my name for a complete list of my >>>> work.* >>>> _______________________________________________ >>>> Fedora Magazine mailing list -- magazine(a)lists.fedoraproject.org >>>> To unsubscribe send an email to magazine-leave(a)lists.fedoraproject.org >>>> Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html >>>> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines >>>> List Archives: >>>> https://lists.fedoraproject.org/archives/list/magazine@lists.fedoraproject.… >>>> >>> >> >> >> -- >> >> >> *Buy my books! The Wives of Jacob, Book I, In the Beginning, The >> Post-Apocalyptic Blacksmith, 777 Bon Mots for Gunslingers and Other Real >> Men, available at most on-line booksellers in multiple formats.* >> >> *Note: The People of Jacb, Book II, In the Middle is currently being >> copy-editedand should be out soon. Just Google my name for a complete list >> of my work.* >> >>

2 2

[Fedocal] Reminder meeting : Magazine editorial board
by pfrields＠fedoraproject.org 05 Sep '19

05 Sep '19

Dear all, You are kindly invited to the meeting: Magazine editorial board on 2018-02-14 from 08:00:00 to 09:00:00 America/New_York At fedora-meeting(a)irc.freenode.net The meeting will be about: This meeting is for editors of the [Fedora Magazine](https://fedoramagazine.org) site. The agenda primarily consists of deciding, assigning, and scheduling posts for the upcoming weeks. More information available at: [https://fedoraproject.org/wiki/Magazine](https://fedoraproject.org/wiki/Mag… Source: https://apps.fedoraproject.org/calendar/meeting/6937/

6 15

Fifteen-year anniversary
by Link Dupont 03 Oct '18

03 Oct '18

Hello, This November will be the fifteenth anniversary of the Fedora project. Would it be appropriate to mark this event with an article on the magazine, or is that more community blog content? I thought it might be fun to provide people with a Fedora Core 1 libvirt image that they could boot up and see what Fedora was like in the beginning. Thoughts? Link

8 15

Article Pitch, Press Ready
by Dale Raby 30 Jun '18

30 Jun '18

Hello: I am in the process of printing my first actual physical book that isn't an ebook. I'm using LibreOffice, FocusWriter and the GIMP mostly on Fedora machines in the pursuit of this goal. Currently we have a test plate and the intent is to print up some test impressions this weekend. The manuscript (short science fiction piece) is pretty much finished other than for some images still being worked on. The plan was/is to produce a pdf with images embedded which will be sent to BoxCar press who will produce a polymer plate from it. This plate gets adhered to a proprietory base they make and locked into the chase of an old Craftsmen platen press bolted to the dining room table. At that point, its old-school ink and paper make-ready and printing by pulling a lever for each impression (my press is hand-operated). Once printed, its time for bindery operations... its looking likely that I will be having that done by a book binder. Its been quite a journey so far, and per some off-list conversations I've had with Oliver Guitierez (sorry if I misspelled your name Oliver) I thought that maybe it might make an interesting article for Fedora Magazine. It would probably end up being a three-part article, and as it is very much visual, the book having illustrations in it, there would probably be quite a few images, some screenshots, i.e.: turning a photograph into a line drawing using GIMP, and some photographs showing the press and the other hardware being used. Does this sound like an article that would be of interest? Thanks, Dale

3 3

About feedback/comment notices
by Paul Frields 28 Jun '18

28 Jun '18

As far as I can tell, comments on blog posts should go to authors correctly now. However, as of this moment moderator comments all get funneled to the fedoramagazine-tips list. That process is kind of noisy, and not really conducive to doing useful things. I'd suggest we have moderation notices either go to a group membership alias (editors), or just discard them. I'm not sure whether we can do this, though, and still have feedback email go to a different destination address. Any ideas? -- Paul

4 4

Re: Electronics articles
by Link Dupont 28 Jun '18

28 Jun '18

Hi Roni, The editorial board discussed your pitches on electronic circuit simulation again in the meeting today. There is still a great deal of enthusiasm and interest around these pitches. Are you still hoping to contribute some articles to the Magazine? Link

1 0

Editorial board meeting recap 2018-Jun-27
by Paul W. Frields 27 Jun '18

27 Jun '18

Minutes: https://meetbot.fedoraproject.org/fedora-meeting/2018-06-27/magazine.2018-0… Minutes (text): https://meetbot.fedoraproject.org/fedora-meeting/2018-06-27/magazine.2018-0… Log: https://meetbot.fedoraproject.org/fedora-meeting/2018-06-27/magazine.2018-0… * * * ========================================= #fedora-meeting: Magazine editorial board ========================================= Meeting started by stickster at 20:00:12 UTC. The full logs are available at https://meetbot.fedoraproject.org/fedora-meeting/2018-06-27/magazine.2018-0… . Meeting summary --------------- * Roll call (stickster, 20:00:17) * Last week's stats (stickster, 20:03:39) * Week of June 18: ~66.1K pageviews -- up from 57.7K week before which is nice! We're at a bit over 240K for June 2018, not bad (stickster, 20:04:20) * Pending review posts (stickster, 20:07:14) * LINK: https://fedoramagazine.org/wp-admin/edit.php?post_status=pending (stickster, 20:07:17) * --- NVidia GPU --- (stickster, 20:07:28) * LINK: https://fedoramagazine.org/?p=21714&preview=1&_ppp=c370b1561e (stickster, 20:07:42) * ACTION: stickster edit nvidia article (stickster, 20:11:21) * --- Ansible classroom --- (stickster, 20:11:45) * LINK: https://fedoramagazine.org/?p=21802&preview=1&_ppp=32aed2f530 (stickster, 20:11:47) * Drafts to review (stickster, 20:14:22) * LINK: https://fedoramagazine.org/wp-admin/edit.php?post_status=draft&post_type=po… (stickster, 20:14:46) * nothing new in drafts unfortunately ;_( (stickster, 20:14:54) * ACTION: sub_pop email electronics drafts author to ask if drafts are still forthcoming (stickster, 20:17:54) * ACTION: sub_pop continue working on Ansible article(s) which will be super-sweet (stickster, 20:23:04) * Pitches to review (stickster, 20:23:12) * LINK: https://fedoramagazine.org/wp-admin/edit.php?post_status=pitch&post_type=po… (stickster, 20:23:25) * --- FOSS git forges --- (stickster, 20:23:36) * ACTION: stickster email Rahul + list about git forge article (done) (stickster, 20:24:41) * Publishing schedule (stickster, 20:27:27) * AGREED: Fri 2018-06-29: Ansible classroom (ready to go); Mon 2018-07-02: LibreOffice (ready to go); Wed 2018-07-04: NVidia (stickster to edit); Fri 2018-07-06: Ansible for workstations (sub_pop, edit TBD) (stickster, 20:31:19) * Open floor, all other business (stickster, 20:31:48) * Magazine meeting will still happen 2018-07-04 at this hour (2000 UTC). (stickster, 20:34:43) * ACTION: stickster see if it's possible to have feedback email a different destination than moderation notices (stickster, 20:42:26) * AGREED: we'd rather just ditch the moderation notice emails, they're just noise (stickster, 20:45:33) * LINK: https://pagure.io/fedoramagazine-theme/issue/20 (stickster, 20:45:54) * ACTION: ryanlerch reimplement coauthors in new theme (stickster, 20:47:29) Meeting ended at 20:50:18 UTC. Action Items ------------ * stickster edit nvidia article * sub_pop email electronics drafts author to ask if drafts are still forthcoming * sub_pop continue working on Ansible article(s) which will be super-sweet * stickster email Rahul + list about git forge article (done) * stickster see if it's possible to have feedback email a different destination than moderation notices * ryanlerch reimplement coauthors in new theme Action Items, by person ----------------------- * ryanlerch * ryanlerch reimplement coauthors in new theme * stickster * stickster edit nvidia article * stickster email Rahul + list about git forge article (done) * stickster see if it's possible to have feedback email a different destination than moderation notices * sub_pop * sub_pop email electronics drafts author to ask if drafts are still forthcoming * sub_pop continue working on Ansible article(s) which will be super-sweet * **UNASSIGNED** * (none) People Present (lines said) --------------------------- * stickster (95) * sub_pop (30) * ryanlerch (25) * zodbot (11) * cverna (0) * ryanlerch[m] (0) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot -- Paul W. Frields http://paul.frields.org/ gpg fingerprint: 3DA6 A0AC 6D58 FEC4 0233 5906 ACDB C937 BD11 3717 http://redhat.com/ - - - - http://pfrields.fedorapeople.org/ The open source story continues to grow: http://opensource.com

1 0

[PITCH] Git hosting options
by Rahul Sundaram 27 Jun '18

27 Jun '18

Hi For obvious reasons now, there is an explosion of growth of interest in alternatives to GitHub and I would like to write an article, perhaps even a series, looking at some of the popular options and what they offer and perhaps follow it up with more that covers them individually. Thoughts? Rahul

3 3

Fedora classroom Ansible 101/102
by Alberto Rodriguez Sanchez 27 Jun '18

27 Jun '18

Hello Magazine team, I wrote a draft about the next session on fedora classroom[0], sorry for jumping the Pitch process, we need some time for promoting the event and the magazine post is always our best reference. Many thanks in advance. [0] https://fedoramagazine.org/?p=21802&preview=1&_ppp=32aed2f530

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

[MOVED TO DISCOURSE] Fedora Magazine - https://discussion.fedoraproject.org/c/project/magazine/57 June 2018