Can not drive “ATP8620-A" Can not mount /dev/sda1
by liang liang wang
My fuloong 2f
AMD CS5536+SATA ACARD ATP8620-A
Test kernel-vanilla-2.6.36-85.fc13.mips64el.rpm and
kernel-vanilla-2.6.36-86.lemote2f.fc13.mips64el.rpm
Can not drive “ATP8620-A" Cause /dev/sda1 Can not mount
How to solve
Thank!
wll
13 years, 4 months
about Install and Compile document writing
by liang liang wang
I am interested in writing on the fedora for mips installation and compile
documentation
Do not know can give me some basic information
My installation process
step 1 Start the computer using 共创linux rescue (IDE,/dev/hda)
step 2 mkdir /mnt/a
step 3 mount /dev/hda1 /mnt/a
step 4 tar zxvf Fedora-13-rootfs-MIPS.tar.gz
step 5 edit boot.cfg
step 6 build yum for Fedora-13-RPMS-MIPS
step 7 yum install xorg*
step 8 yum install gnome*
step 9 startx
Q1:How did you boot up the computer?
Q2:step 7 and step 8 Right?
Q3:Different kernel How to use?
edora-13-RPMS-MIPS kernel-vanilla-2.6.36-85.fc13.mips64el.rpm
Fedora-13-rootfs-MIPS vmlinuz-2.6.35-85.fc13.mips64el
kernel-vanilla-2.6.36-86.lemote2f.fc13.mips64el.rpm (for jebba)
Thank you very much
13 years, 4 months
Re: 关于ACARD ATP8620-A SATA支持
by Fai Wong (lazyfai)
請註冊一下 fedora-mips 列表
https://admin.fedoraproject.org/mailman/listinfo/mips
2010/11/26 liang liang wang <wllxnd(a)gmail.com>:
> 您好!
>
> 我测试了 kernel-vanilla-2.6.36-85.fc13.mips64el.rpm 与
> kernel-vanilla-2.6.36-86.lemote2f.fc13.mips64el.rpm 两个内核
>
> 目前均不支持ATP8620-A SATA,所以SATA盘无法驱动起来
>
> 请问如何找到驱动,并编译到内核中去
>
> 还有,有没有关于fedora 13 编译到mips架构的相关文档资料,我可以进行测试与整理
>
> 谢谢!
>
> wll
>
>
13 years, 4 months
ATP8620 SATA no support
by liang liang wang
Test kernel-vanilla-2.6.36-85.fc13.mips64el.rpm and
kernel-vanilla-2.6.36-86.lemote2f.fc13.mips64el.rpm
No support ACARD ATP8620-A
Thank!
13 years, 5 months
Re: Joining Fedora MIPS
by Fai Wong (lazyfai)
Please join our mailing list as well! :-)
在 2010年11月21日上午2:01，Jeff Moe <moe(a)blagblagblag.org> 寫道：
> On Saturday 20 November 2010 00:47:32 Fai Wong wrote:
>
>> ---------- 轉寄的郵件 ----------
>
>> 寄件者： liang liang wang <wllxnd(a)gmail.com>
>
>> 日期： 2010年11月20日下午2:24
>
>> 主旨： 终于联系上您了-wll
>
>> 收件者： lazyfai <lazyfai(a)gmail.com>
>
>>
>
>> 1.安装文档资料没有
>
>> 2.发现kernel不支持SATA设备
>
>> 3.部分软件包依赖关系的包丢失,可能是我装的不对
>
> I have a number of updates and a few additional packages here:
>
> http://repos.fedorapeople.org/repos/jebba/yeeloong/
>
> It includes a kernel with SATA support, so the default disk drive is
> /dev/sda
>
> -Jeff
>
> _______________________________________________
> mips mailing list
> mips(a)lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/mips
>
>
13 years, 5 months
Fedora 13 Updates
by jeff
I am currently rebuilding a number of Fedora 13 updates for MIPS on my Lemote
Yeeloong. I quickly hit my fedorapeople disk space quota and will likely hit
my new quota soon. I have been uploading the packages here:
http://repos.fedorapeople.org/repos/jebba/yeeloong/
Could/should I be uploading them to the main fedora-mips repo? If so, how? If
not, where?
I was also considering doing this for fedora-14 (perhaps of instead of f13),
since it is coming up so soon and is frozen. Are there currently other plans
for doing this?
Note, the kernel that is in my repo is for the Lemote Yeeloong (lemote2f)
using the latest git[1], which means you have to s/hda/sda/ in your
/etc/fstab, /boot/boot.cfg and/org GRUB if you use it.
Thanks,
-Jeff
[1] git://dev.lemote.com/linux-loongson-community.git
http://dev.lemote.com/code/linux-loongson-community
13 years, 5 months
Fwd: 终于联系上您了-wll
by Fai Wong (lazyfai)
---------- 轉寄的郵件 ----------
寄件者： liang liang wang <wllxnd(a)gmail.com>
日期： 2010年11月20日下午2:24
主旨： 终于联系上您了-wll
收件者： lazyfai <lazyfai(a)gmail.com>
您好!
收到了您的回复非常高兴
我从事Linux的研究有十年了,04年RHCE
关于龙梦的相关资料我也看过了,不过我喜欢Fedora
您们提供的Fedora 13 for mips已经2F安装好了,并进行了相关测试!
发现几个问题:
1.安装文档资料没有
2.发现kernel不支持SATA设备
3.部分软件包依赖关系的包丢失,可能是我装的不对
我想加入你们可以吗?
wll
13 years, 5 months
Fedora 14
by jeff
Is anyone currently building or planning on building Fedora 14 for MIPS?
Thanks,
-Jeff
13 years, 5 months
