12:30 p.m.
Hello,
I recently upgraded from fc5 to f7 and have since been having problems
using a Multiface II card with the cardbus adapter. The output from any
jack app is choppy and there is background crackle as well. Jack/Alsa
both work fine on the internal laptop card. From the /var/log/messages
output, it looks like there *might* be a hardware/pci problem:
Some interesting dmesg output:
(if I boot with the default arguments)
PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try
'pci=assign-busses')
PCI: Cannot allocate resource region 0 of device 0000:02:03.0
(if I boot the kernel with 'lapic pci=assign-busses, i still get)
PCI: Cannot allocate resource region 0 of device 0000:02:03.0
I'm not sure if that is a red herring, but that happens to be the
location of the cardbus bridge. I've been testing this using PureData
and their sin wave sound card test, but all jack applications seem to
exhibit this problem. I've tried recording the output directly from PD
and playing it back on the internal card, and the artifacts are found in
the recording. I've also tried disabling drm and selinux with no luck.
This occurs on both the stock kernels and the rt-kernels (with either
the default alsa, or the kernel module Fernando just made). From looking
at the IRQs, it looks like IRQ10 is pretty full, but that seemed to work
fine for FC5.
Is anyone using successfully using hdsp/multiface on F7 using the CCRMA
repo packages? Does anyone have any additional troubleshooting ideas?
Thanks for any help,
-Scott
Misc system info
-----------------------
$ cat .jackdrc
jackd -R -dalsa -dhw:2 -r48000 -p2048 -n2 -i18 -o18
$ cat /proc/interrupts
CPU0
0: 88908 XT-PIC-XT timer
1: 10 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
6: 1 XT-PIC-XT wbsd
7: 1 XT-PIC-XT parport0
8: 3 XT-PIC-XT rtc
9: 589 XT-PIC-XT acpi
10: 74655 XT-PIC-XT yenta, uhci_hcd:usb1, uhci_hcd:usb2,
uhci_hcd:usb3, ehci_hcd:usb4, ohci1394, ipw2200, hdsp, Intel
82801DB-ICH4, Intel 82801DB-ICH4 Modem, eth0, radeon@pci:0000:01:00.0
12: 120 XT-PIC-XT i8042
14: 16108 XT-PIC-XT libata
15: 4665 XT-PIC-XT libata
NMI: 1312981
LOC: 131080
ERR: 0
MIS: 0
$ cat /proc/asound/devices
2: : timer
3: : sequencer
4: [ 2- 0]: raw midi
5: [ 2- 0]: digital audio playback
6: [ 2- 0]: digital audio capture
7: [ 2- 0]: hardware dependent
8: [ 2] : control
9: [ 0- 4]: digital audio playback
10: [ 0- 3]: digital audio capture
11: [ 0- 2]: digital audio capture
12: [ 0- 1]: digital audio capture
13: [ 0- 0]: digital audio playback
14: [ 0- 0]: digital audio capture
15: [ 0] : control
16: [ 1- 0]: digital audio playback
17: [ 1- 0]: digital audio capture
18: [ 1] : control
$ cat /proc/asound/cards
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with ALC250 at irq 10
1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem
Intel 82801DB-ICH4 Modem at irq 10
2 [DSP ]: H-DSP - Hammerfall DSP
RME Hammerfall DSP + Multiface at 0xd4000000, irq
10
$ cat /etc/modprobe.conf
alias eth0 8139too
alias scsi_hostadapter ata_piix
alias scsi_hostadapter1 usb-storage
alias eth1 ipw2200
alias snd-card-0 snd-intel8x0
alias snd-card-2 snd-hdsp
alias snd-slot-2 snd-hdsp
#install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 &&
/usr/sbin/alsactl restore >/dev/null 2>&1 || :
#remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
/sbin/modprobe -r --ignore-remove snd-intel8x0
options ipw2200 hwcrypto=0 associate=0
options snd-intel8x0 index=0
options snd-hdsp index=2
$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14
07:25:50 2007 UTC).
$ cat /proc/asound/DSP/hdsp
RME Hammerfall DSP + Multiface (Card #3)
Buffers: capture f6400000 playback f6600000
IRQ: 10 Registers bus: 0xd4000000 VM: 0xf8ab4000
Control register: 0x10040de
Control2 register: 0x0
Status register: 0x2000000
Status2 register: 0xffff0703
FIFO status: 0
MIDI1 Output status: 0xffffff00
MIDI1 Input status: 0xffffff00
MIDI2 Output status: 0xffffff00
MIDI2 Input status: 0xffffff00
Use Midi Tasklet: on
Buffer Size (Latency): 8192 samples (2 periods of 32768 bytes)
Hardware pointer (frames): 0
Precise pointer: off
Line out: on
Firmware version: 5
Sample Clock Source: Internal 48 kHz
Preferred Sync Reference: ADAT1
AutoSync Reference: None
AutoSync Frequency: 0
System Clock Mode: Master
System Clock Frequency: 48000
System Clock Locked: No
IEC958 input: Coaxial
IEC958 output: Coaxial only
IEC958 quality: Consumer
IEC958 emphasis: off
IEC958 NonAudio: off
IEC958 sample rate: Error flag set
ADAT1: No Lock
SPDIF: No Lock
Word Clock: No Lock
ADAT Sync: No Lock
$ /sbin/lspci -vv
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O
Controller (rev 21)
Subsystem: COMPAL Electronics Inc Unknown device 0012
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at b0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP
Controller (rev 21) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: e0000000-efffffff
Prefetchable memory behind bridge: a0000000-afffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: COMPAL Electronics Inc Unknown device 0012
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 1200 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: COMPAL Electronics Inc Unknown device 0012
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 1600 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: COMPAL Electronics Inc Unknown device 0012
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at 1700 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: COMPAL Electronics Inc Unknown device 0012
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 0: Memory at f4000000 (32-bit, non-prefetchable)
[size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: d0000000-dfffffff
Prefetchable memory behind bridge: 90000000-9fffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface
Bridge (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE
Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: COMPAL Electronics Inc Unknown device 0012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1100 [size=16]
Region 5: Memory at 50000000 (32-bit, non-prefetchable)
[size=1K]
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller (rev 03)
Subsystem: COMPAL Electronics Inc Unknown device 0012
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 1400 [size=32]
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: COMPAL Electronics Inc Unknown device 0017
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at e000 [size=256]
Region 1: I/O ports at e100 [size=64]
Region 2: Memory at f0000400 (32-bit, non-prefetchable)
[size=512]
Region 3: Memory at f0000600 (32-bit, non-prefetchable)
[size=256]
Capabilities: <access denied>
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: COMPAL Electronics Inc Unknown device 0012
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at e200 [size=256]
Region 1: I/O ports at e300 [size=128]
Capabilities: <access denied>
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility
Radeon 9600 M10] (prog-if 00 [VGA])
Subsystem: COMPAL Electronics Inc Unknown device 0012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (2000ns min), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at a8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c100 [size=256]
Region 2: Memory at e0010000 (32-bit, non-prefetchable)
[size=64K]
[virtual] Expansion ROM at a0000000 [disabled] [size=128K]
Capabilities: <access denied>
02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: COMPAL Electronics Inc Unknown device 0012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (8000ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0001800 (32-bit, non-prefetchable)
[size=2K]
Region 1: I/O ports at a100 [size=128]
Capabilities: <access denied>
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: COMPAL Electronics Inc Unknown device 0012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at d0001000 (32-bit, non-prefetchable)
[size=256]
Capabilities: <access denied>
02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG
Network Connection (rev 05)
Subsystem: Intel Corporation Unknown device 2701
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (750ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0000000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: <access denied>
02:03.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
(rev 01)
Subsystem: COMPAL Electronics Inc Unknown device 0012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0002000 (32-bit, non-prefetchable)
[size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 90000000-93fff000 (prefetchable)
Memory window 1: d4000000-d7fff000
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt-
PostWrite+
16-bit legacy interface ports at 0001
03:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall
DSP (rev 32)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d4000000 (32-bit, non-prefetchable)
[size=64K]
--
http://www.fastmail.fm - A fast, anti-spam email service.