On Thu, 2009-06-04 at 19:18 +0100, Peter Robinson wrote:
Not yet, but its been a couple of weeks since I've tried rawhide
on my
XO because I've been so busy with other stuff. Do you have a serial
console or jtag (which ever one the XO supports) to be able to get the
output before the framebuffer initiates?
Yes, the entire serial console output is:
+
Forthmacs
Type 'i' to interrupt stand-init sequence
USB2 devices:
/pci/usb@f,5/wlan@0,0
USB1 devices:
Type the Esc key to interrupt automatic startup
Boot device: /nandflash:\boot\olpc.fth Arguments: Boot
device: /nandflash:\boot\olpc.fth Arguments:
Boot device: /nandflash:\boot\vmlinuz0 Arguments: root=mtd0
rootfstype=jffs2 console=tty0 console=ttyS0,115200 fbcon=font:SUN12x22
Loading ramdisk image from nand:\boot\initrd0.img ...
Nothing of interest, unfortunately.
Daniel