--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2020-8a74c37679
2020-04-29 02:13:31.168526
--------------------------------------------------------------------------------
Name : fwupd
Product : Fedora 32
Version : 1.4.1
Release : 1.fc32
URL :
https://github.com/fwupd/fwupd
Summary : Firmware update daemon
Description :
fwupd is a daemon to allow session software to update device firmware.
--------------------------------------------------------------------------------
Update Information:
This release adds the following features: * Allow adding a device 'proxy'
device that can do actions on it * Allow specifying the device on the command
line by GUID This release fixes the following bugs: * Add a device quirk that
forces an explicit device-id match * Allow a device to set the logical or
physical ID during ->setup() * Correctly format firmware version of Dynabook
X30 and X40 * Do not show safe mode errors for USB4 host controllers * Do not
show the USB 2 VLI recovery devices for USB 3 hubs * Fix the correct DeviceID
set by GetDetails * Make the EP963X plugin actually work on real hardware *
Make the tss2-esys dep conditional for RHEL 8 * Only update the FW2 partition
of the ThinkPad USB-C Dock Gen2 * Prefer to update the child device first if
the order is unspecified * Refresh device name and format before setting
supported flag * Reset the progressbar time estimate if the percentage is
invalid * Set the CCGX device name and summary from quirk files * Wait for the
cxaudio device to reboot after writing firmware
--------------------------------------------------------------------------------
ChangeLog:
* Mon Apr 27 2020 Richard Hughes <richard(a)hughsie.com> 1.4.1-1
- New upstream release
- Allow specifying the device on the command line by GUID
- Correctly format firmware version of Dynabook X30 and X40
- Do not show safe mode errors for USB4 host controllers
- Do not show the USB 2 VLI recovery devices for USB 3 hubs
- Fix the correct DeviceID set by GetDetails
- Only update the FW2 partition of the ThinkPad USB-C Dock Gen2
- Prefer to update the child device first if the order is unspecified
- Refresh device name and format before setting supported flag
- Reset the progressbar time estimate if the percentage is invalid
- Set the CCGX device name and summary from quirk files
- Wait for the cxaudio device to reboot after writing firmware
* Tue Apr 14 2020 Richard Hughes <richard(a)hughsie.com> 1.4.0-1
- New upstream release
- Actually reload the DFU device after upgrade has completed
- Add plugin for CPU microcode
- Add plugin for Cypress CCGX hardware
- Add plugin for EP963x hardware
- Add STM32F745 DfuSe version quirk
- Allow server metadata to set the device name and version format
- Always check for 'PLAIN' when doing vercmp() operations
- Apply version format to releases and devices at same time
- Check the firmware requirements before adding 'SUPPORTED'
- Correctly attach VL103 after a firmware update
- Do not allow devices that have no vendor ID to be 'UPDATABLE'
- Do not use shim for non-secure boot configurations
- Export the device state, release creation time and urgency
- Fix a crash when removing device parents
- Fix a difficult-to-trigger daemon hang when replugging devices
- Fix a runtime error when detaching MSP430
- Fix CounterpartGuid when there is more than one supported device
- Fix reporting Synaptics cxaudio version number
- Introduce a new VersionFormat of 'hex'
- Load the signature to get the aliased CDN-safe version of the metadata
- Never add USB hub devices that are not upgradable
- Only auto-add counterpart GUIDs when required
- Parse the CSR firmware as a DFU file
- Set the protocol when updating logitech HID++ devices
- Use Jcat files in firmware archives and for metadata
- When TPM PCR0 measurements fail, query if secure boot is available and enabled
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2020-8a74c37679' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------