[Bug 525510] New: Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

Summary: Review Request: geda-gaf - Design Automation toolkit for electronic design

https://bugzilla.redhat.com/show_bug.cgi?id=525510

Summary: Review Request: geda-gaf - Design Automation toolkit
                    for electronic design
           Product: Fedora
           Version: rawhide
          Platform: All
        OS/Version: Linux
            Status: NEW
          Severity: medium
          Priority: medium
         Component: Package Review
        AssignedTo: [e-mail]
        ReportedBy: [e-mail]
         QAContact: [e-mail]
                CC: [e-mail], [e-mail]
   Estimated Hours: 0.0
    Classification: Fedora

Spec URL: http://chitlesh.fedorapeople.org/RPMS/geda-gaf.spec
SRPM URL: http://chitlesh.fedorapeople.org/RPMS/geda-gaf-1.5.4-1.fc11.src.rpm
Description: 
The GPL Electronic Design Automation (gEDA) project has produced and
continues working on a full GPL'd suite and toolkit of Electronic
Design Automation tools. These tools are used for electrical circuit
design, schematic capture, simulation, prototyping, and production.

Currently, the gEDA project offers a mature suite of free software
applications for electronics design, including schematic capture,
attribute management, bill of materials (BOM) generation, netlisting
into over 20 netlist formats, analog and digital simulation, and
printed circuit board (PCB) layout.

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

--- Comment #1 from Chitlesh GOORAH   2009-09-24 12:49:36 EDT ---
This package will obsolete all the geda packages available under the fedora
repositories.

With the upcoming releases, the geda community will provide only big tarball
instead of smaller packages. Hence in accordance to fedora packaging
guidelines, I have to file another package review before obsoleting the
existing fedora geda-gaf packages.

Please note that upstream releases, the tarball under the name of gEDA-gaf,
however in order to maintain consistency between various distributions,
Packagers of various distributions have agreed to use the name geda-gaf as the
debian community does not accept capital letters. That said, upstream agreed to
release the next release under "geda-gaf" without any capital letters.

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

Rex Dieter  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |ASSIGNED
                 CC|                            |[e-mail]
         AssignedTo|[e-mail]    |[e-mail]
               Flag|                            |fedora-review?

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

--- Comment #2 from Rex Dieter   2009-09-24 13:16:18 EDT ---
scratch build:
http://koji.fedoraproject.org/koji/taskinfo?taskID=1704192

In the meantime, did a local, build, tripped up on:

ERROR   0001: file '/usr/bin/gschlas' contains a standard rpath '/usr/lib64' in
[/usr/lib64]
ERROR   0001: file '/usr/bin/gattrib' contains a standard rpath '/usr/lib64' in
[/usr/lib64]
ERROR   0001: file '/usr/bin/gnetlist' contains a standard rpath '/usr/lib64'
in [/usr/lib64]
ERROR   0001: file '/usr/bin/gsymcheck' contains a standard rpath '/usr/lib64'
in [/usr/lib64]
ERROR   0001: file '/usr/bin/gschem' contains a standard rpath '/usr/lib64' in
[/usr/lib64]
ERROR   0001: file '/usr/bin/sarlacc_schem' contains a standard rpath
'/usr/lib64' in [/usr/lib64]

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

--- Comment #3 from Rex Dieter   2009-09-24 13:19:53 EDT ---
OK, full rpmlint output follows:

$ rpmlint *.rpm noarch/*.rpm x86_64/*.rpm                                       
geda-symbols.noarch: W: file-not-utf8 /usr/share/doc/geda-symbols-1.5.4/AUTHORS 
geda-symbols.noarch: W: file-not-utf8
/usr/share/doc/geda-symbols-1.5.4/ChangeLog-1.0              
geda-gaf.x86_64: W: incoherent-version-in-changelog 1.5.4-1.20090830snap
['1:1.5.4-1.fc11', '1:1.5.4-1']
geda-gaf.x86_64: E: no-binary                                                   
geda-gattrib.x86_64: E: binary-or-shlib-defines-rpath /usr/bin/gattrib
['/usr/lib64']                   
geda-gnetlist.x86_64: E: binary-or-shlib-defines-rpath /usr/bin/gnetlist
['/usr/lib64']                 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/pads/singlenet-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/pads/SlottedOpamps-output.net 
geda-gnetlist.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/futurenet2/SlottedOpamps-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/pads/JD_Include_nomunge-output.net 
geda-gnetlist.x86_64: W: spurious-executable-perm
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/run_backend_tests.sh              
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/pads/TwoStageAmp_Include-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/redac/TwoStageAmp-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/redac/cascade-output.net  
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/pads/JD_Sort_nomunge-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/redac/JD_Sort-output.net  
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/pads/multiequal-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/redac/netattrib-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/redac/JD_Include-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/pads/TwoStageAmp_Sort-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/singlenet.pads   
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/redac/TwoStageAmp_Sort-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/redac/JD-output.net       
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/redac/singlenet-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/pads/JD_Sort-output.net   
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/redac/JD_Sort_nomunge-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/pads/netattrib-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/redac/TwoStageAmp_Include-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/pads/JD-output.net        
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/pads/powersupply-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/pads/cascade-output.net   
geda-gnetlist.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/drc/multiequal-output.net 
geda-gnetlist.x86_64: W: spurious-executable-perm
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/run_tests.sh     
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/powersupply.pads 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/pads/JD_Include-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/redac/powersupply-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/pads/TwoStageAmp-output.net 
geda-gnetlist.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/switcap/SlottedOpamps-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/redac/multiequal-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/redac/SlottedOpamps-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/pads/JD_nomunge-output.net 
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/redac/JD_nomunge-output.net 
geda-gnetlist.x86_64: W: spurious-executable-perm
/usr/share/doc/gEDA-gaf/gnetlist/tests/runtest.sh              
geda-gnetlist.x86_64: W: wrong-file-end-of-line-encoding
/usr/share/doc/gEDA-gaf/gnetlist/tests/common/outputs/redac/JD_Include_nomunge-output.net 
geda-gschem.x86_64: E: binary-or-shlib-defines-rpath /usr/bin/gschem
['/usr/lib64']                              
geda-gschem.x86_64: W: file-not-utf8 /usr/share/doc/geda-gschem-1.5.4/ChangeLog 
geda-gsymcheck.x86_64: E: binary-or-shlib-defines-rpath /usr/bin/gsymcheck
['/usr/lib64']                        
geda-gsymcheck.x86_64: W: spurious-executable-perm
/usr/share/doc/gEDA-gaf/gsymcheck/tests/runtest.sh            
geda-utils.x86_64: E: binary-or-shlib-defines-rpath /usr/bin/sarlacc_schem
['/usr/lib64']                        
geda-utils.x86_64: E: binary-or-shlib-defines-rpath /usr/bin/gschlas
['/usr/lib64']                              
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/del_case_sens1-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/translate_col_change_R10_value-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/rotate_case_sens-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/multiply_integer_factor-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/match_col_insens4-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/translate_col_no_match1-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/process_comment-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/offset_match_negative_real_offset-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/multiply_negative_integer_factor-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/multiply_with_checklist-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/multiply_real_factor-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/chunits_to_mil_2cols-protel_example1_mm.txt-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/rotate_negative_real_angle-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/rotate_real_angle-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/rotate_check_cols_no_match-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/subst_check_cols_no_match-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/del_case_insens2-pcb_example2.xy-error 
geda-utils.x86_64: W: spurious-executable-perm
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/run_tests.sh            
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/offset_check_cols_no_match-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/multiply_negative_real_factor-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/offset_match_real_offset-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/match_no_args-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/offset_match_negative_offset-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/match_col_sens3-pcb_example2.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/match_col_insens1-pcb_example2.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/footprint_protel1-protel_example1_mil.txt-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/panelize_tabulate-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/chunits_2mm_6col_tab_notit-protel_example1_mil.txt-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/chunits_to_mil-protel_example1_mm.txt-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/output_delimiter-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/match_col_sens2-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/chunits_to_mm_no_title-protel_example1_mil.txt-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/swap_cols_with_match-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/swap_cols_no_match-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/match_col_insens2-pcb_example2.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/match_col_sens4-pcb_example2.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/match_col_insens3-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/chunits_done_notitle-protel_example1_mil.txt-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/del_check_cols_no_match-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/translate_col_chg_all_val_plus_k-pcb_example1.xy-error 
geda-utils.x86_64: W: spurious-executable-perm
/usr/share/doc/gEDA-gaf/utils/tests/refdes_renum/run_tests.sh     
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/insert_col_first_pos-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/translate_col_no_match2-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/footprint_report1-report1.txt-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/del_case_sens3-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/insert_col_second_pos-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/match_col_sens1-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/do_nothing-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/del_case_insens1-pcb_example1.xy-error 
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/del_case_sens2-pcb_example2.xy-error 
geda-utils.x86_64: W: spurious-executable-perm
/usr/share/doc/gEDA-gaf/utils/examples/tragesym/alltest           
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/offset_check_cols_match-pcb_example1.xy-error
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/subst_check_cols_match-pcb_example1.xy-error
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/footprint_pcb1-pcb_example1.xy-error
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/rotate_case_insens-pcb_example1.xy-error
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/rotate_negative_angle-pcb_example1.xy-error
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/translate_col_R10_value_case_insens-pcb_example1.xy-error
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/chunits_to_mm_2cols-protel_example1_mil.txt-error
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/do_nothing_tabulated-pcb_example1.xy-error
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/swap_cols_no_matchlist-pcb_example1.xy-error
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/del_case_sens4-pcb_example2.xy-error
libgeda.x86_64: W: shared-lib-calls-exit /usr/lib64/libgeda.so.37.0.0
exit@GLIBC_2.2.5
libgeda-devel.x86_64: W: no-documentation
11 packages and 0 specfiles checked; 68 errors, 45 warnings.

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

--- Comment #4 from Rex Dieter   2009-09-24 13:57:30 EDT ---
check upgrade paths,

yum groupinstall electronic-lab

Then manually upgraded to everything within the aforementioned scratch build,
good.

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

--- Comment #5 from Rex Dieter   2009-09-24 13:59:21 EDT ---
oh, I guess there aren't any Obsoletes here that I notice, nevermind. :)

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

--- Comment #6 from Rex Dieter   2009-09-24 14:16:48 EDT ---
Upstream sources verified:
$ md5sum gEDA-gaf-1.5.4.tar.gz
d99006d25bb7e61cbbdcc6c775861169  gEDA-gaf-1.5.4.tar.gz

1. MUST: remove rpaths. this snippet (in %prep after %setup) worked nicely for
me:

%if "%{_libdir}" != "/usr/lib"
sed -i -e 's|"/lib /usr/lib|"/%{_lib} %{_libdir}|' configure
%endif

2.  MUST: remove or document need for including the empty files related to the
rpmlint errors like:
geda-utils.x86_64: E: zero-length
/usr/share/doc/gEDA-gaf/utils/tests/gxyrs/outputs/offset_check_cols_match-pcb_example1.xy-error

I believe that should take care of all or a majority of the rpmlint items.

3.  MUST: add to libgeda-devel
Requires: pkgconfig
(for directory ownership)

4.  MUST: add desktop scriptlet to geda-gschem (it's .desktop file contains
MimeTypes= key):
http://fedoraproject.org/wiki/Packaging:ScriptletSnippets#desktop-database

5.  SHOULD: use %posttrans optimized versions of scriptlets (icons in
particular), but not a big deal, adds complexity, but will also speed
installation and upgrades.

That's all I've got so far, mind fixing these up, and we can do another final
pass?

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

--- Comment #7 from Chitlesh GOORAH   2009-09-24 16:07:32 EDT ---
Updated
Spec URL: http://chitlesh.fedorapeople.org/RPMS/geda-gaf.spec
SRPM URL: http://chitlesh.fedorapeople.org/RPMS/geda-gaf-1.5.4-2.fc11.src.rpm

Most of the rpmlint have been fixed. Others are scripts to be executed by the
user as documentation.

Test case for F-11 ONLY:

yum install geda*

Setup gedatest repo created from koji scratch build as explain here.

yum install geda-gaf.x86_64 --enablerepo=gedatest
or
yum install geda-gaf.i586 --enablerepo=gedatest

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

--- Comment #8 from Chitlesh GOORAH   2009-09-24 16:09:55 EDT ---
(In reply to comment #5)
> oh, I guess there aren't any Obsoletes here that I notice, nevermind. :)

This was automatically processed by the use of epoch.

Once the package has been approved, I'll set the following as dead packages:
* libgeda
* geda-gschem
* geda-symbols
* geda-gnetlist
* geda-utils
* geda-examples
* geda-docs
* geda-gattrib
* geda-gsymcheck

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

--- Comment #9 from Chitlesh GOORAH   2009-09-24 16:13:09 EDT ---
Sorry forgot to post the url on how to setup the repo:

http://chitlesh.wordpress.com/2009/09/01/fel-geda-gaf-1-5-4-versus-fedora-pa...

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

Rex Dieter  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
               Flag|fedora-review?              |fedora-review+

--- Comment #10 from Rex Dieter   2009-09-28 15:03:24 EDT ---
OK, baring a broken dep in the gedatest repo, I think this latest update
addresses all the blocker-worthy items I could find.

APPROVED.

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

Chitlesh GOORAH  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
               Flag|                            |fedora-cvs?

--- Comment #11 from Chitlesh GOORAH   2009-09-28 15:12:05 EDT ---
New Package CVS Request
=======================
Package Name: geda-gaf
Short Description: Design Automation toolkit for electronic design
Owners: chitlesh
Branches: F-10 F-11 F-12 EL-5

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

Kevin Fenzi  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
               Flag|fedora-cvs?                 |fedora-cvs+

--- Comment #12 from Kevin Fenzi   2009-09-29 16:11:39 EDT ---
cvs done.

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

Chitlesh GOORAH  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|ASSIGNED                    |CLOSED
         Resolution|                            |RAWHIDE

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

--- Comment #13 from Mamoru Tasaka   2009-10-04 10:18:52 EDT ---
Well, I don't think we should close review request when
build fails on "rawhide" (currently F-12).

The problem is that gattrib/src/gtkitementry_2_2.c uses members of
struct GtkEntry which is "declared" as "private" in gtk-2.0/gtk/gtkentry.h.
The following can be a workaround, however in the future
gattrib/src/gtkitementry_2_2.c should be fixed not to use "private" member
of GtkEntry.

----------------------------------------------------------
%if 0%{?fedora} >= 12
sed -i.gtkver -e 's|2.17.3|2.19.0|' configure
sed -i.gtkver \
 -e 's|entry->text_size|entry->x_text_size|g' \
 -e 's|entry->n_bytes|entry->x_n_bytes|g' \
 gattrib/src/gtkitementry_2_2.c
%endif
----------------------------------------------------------

c.f.
https://www.redhat.com/archives/fedora-extras-commits/2009-September/msg0101...
This seems to be using the exactly same code.

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

Mamoru Tasaka  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
           Keywords|                            |Reopened
             Status|CLOSED                      |ASSIGNED
         Resolution|RAWHIDE                     |

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

--- Comment #14 from Fedora Update System   2009-10-06 23:14:29 EDT ---
geda-gaf-1.6.0-1.fc10 has been pushed to the Fedora 10 stable repository.  If
problems still persist, please make note of it in this bug report.

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

Fedora Update System  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|ASSIGNED                    |CLOSED
   Fixed In Version|                            |1.6.0-1.fc10
         Resolution|                            |ERRATA

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

--- Comment #15 from Fedora Update System   2009-10-06 23:15:39 EDT ---
geda-gaf-1.6.0-1.fc11 has been pushed to the Fedora 11 stable repository.  If
problems still persist, please make note of it in this bug report.

[Bug 525510] Review Request: geda-gaf - Design Automation toolkit for electronic design

[Red Hat Bugzilla]

Please do not reply directly to this email. All additional
comments should be made in the comments box of this bug.

https://bugzilla.redhat.com/show_bug.cgi?id=525510

Fedora Update System  changed:

What    |Removed                     |Added
----------------------------------------------------------------------------
   Fixed In Version|1.6.0-1.fc10                |1.6.0-1.fc11