6:26 p.m.
Hi,
when I burn the 'boot.iso' file found in the 'images' direcory of
Fedora 6's ppc DVD-image (FC-6-ppc-DVD.iso) to a CD, I can
successfully boot from it with my iBook G4 (ppc-32). I have been
trying to re-create a bootable image from it:
# mkdir boot; mount -o loop boot.iso boot
# rm -rf boot-new; cp -rp boot boot-new
# find boot-new -name TRANS.TBL -exec rm -f {} \;
# volume_id="PBOOT"; system_id="PPC"; volume_set_id="6";
application_id="Fedora Core 6"; hfs_volume_id=$volume_set_id
# mkisofs -V "$volume_id" -sysid "$system_id" -A
"$application_id" -volset "$volume_set_id" \
-untranslated-filenames -joliet -rational-rock -translation-table \
-hfs -hfs-bless ppc -prep-boot ppc/chrp/yaboot -chrp-boot -part -hfs-volid
"$hfs_volume_id" -no-desktop \
-quiet -o boot-new.iso boot-new
Warning: creating filesystem that does not conform to ISO-9660.
CHRP boot partition 1
PReP boot partition 2 is "ppc/chrp/yaboot"
# ls -l *.iso
-rw-r--r-- 1 root root 43642880 Oct 17 20:21 boot.iso
-rw-r--r-- 1 root root 43642880 Mar 30 00:35 boot-new.iso
As showed above, the new .iso has exactly the same size as the
original one. However, when I burn that onto CD and try to boot from
it -> no success. What am I missing?
thanks,
rob.
--
8:13 p.m.
On Fri, 30 Mar 2007, 01:04 GMT+01 David Woodhouse wrote:
On Fri, 2007-03-30 at 01:26 +0200, Robert Allerstorfer wrote:
> -hfs-bless ppc
You need to bless the ppc/mac directory, don't you? Not
'ppc'.
Run 'dir cd:,\\' to get a listing of the blessed directory.
There should
be an 'ofboot.b' there and it should have type TBXI.
thanks David for your help. Running mkisofs with '-hfs-bless ppc/mac'
instead of '-hfs-bless ppc' did also not make the resulting .iso
bootable, unfortunately. Where can I run
dir cd:,\\
? Within the Open Firmware console, it does not seem to work. When I
input
dir
there, I get the response "can´t OPEN the DIR device". A little more
detailed instructions on how to debug/solve my problem would be very
useful.
Thanks!
rob.
11:18 p.m.
On Thursday 29 March 2007 21:13:20 Robert Allerstorfer wrote:
thanks David for your help. Running mkisofs with '-hfs-bless
ppc/mac'
instead of '-hfs-bless ppc' did also not make the resulting .iso
bootable, unfortunately. Where can I run
Have you tried using the full path to these directories?
--
Jesse Keating
Release Engineer: Fedora
8:41 a.m.
On Fri, 30 Mar 2007, 01:04 GMT+01 David Woodhouse wrote:
Run 'dir cd:,\\' to get a listing of the blessed directory.
There should
be an 'ofboot.b' there and it should have type TBXI.
I have now been able to successfully run 'dir cd:,\\' from the OF
prompt (very cool - remotely via telnet) - don't know why I was not
successful with this before my previous post, sorry for the noise.
With the CD inserted, burnt from the original "boot.iso":
1 > dir cd:,\\
Size/ GMT File/Dir
bytes date time TYPE CRTR Name
2050 10/17/ 6 20:21: 7 tbxi chrp ofboot.b
145068 10/17/ 6 20:21: 7 ???? ???? yaboot
However, the TYPE and CRTR are not correct on the CD burnt from the
new "boot-new.iso":
1 > dir cd:,\\
Size/ GMT File/Dir
bytes date time TYPE CRTR Name
2050 10/18/ 6 2:21: 7 TEXT unix ofboot.b
145068 10/18/ 6 2:21: 7 TEXT unix yaboot
Here is my complete input/output for creating "boot-new.iso":
[root@fedora-ibook [__data__]]# test -d boot || mkdir boot
[root@fedora-ibook [__data__]]# mount -o loop boot.iso boot
[root@fedora-ibook [__data__]]# rm -rf boot-new; cp -rp boot boot-new
[root@fedora-ibook [__data__]]# find boot-new -name TRANS.TBL -exec rm -f {} \;
[root@fedora-ibook [__data__]]# volume_id="PBOOT"; system_id="PPC";
volume_set_id="6"; application_id="Fedora Core 6";
hfs_volume_id=$volume_set_id
[root@fedora-ibook [__data__]]# mkisofs -volid "$volume_id" -sysid
"$system_id" -appid "$application_id" -volset
"$volume_set_id" \
-untranslated-filenames -joliet -rational-rock -translation-table \
-hfs -prep-boot ppc/chrp/yaboot -chrp-boot -part -hfs-volid "$hfs_volume_id"
-no-desktop -hfs-bless ./boot-new/ppc/mac \
-o boot-new.iso ./boot-new
Warning: creating filesystem that does not conform to
ISO-9660.
mkisofs: Warning: no Apple/Unix files will be decoded/mapped
Blessing mac (./boot-new/ppc/mac)
CHRP boot partition 1
PReP boot partition 2 is "ppc/chrp/yaboot"
23.53% done, estimate finish Fri Mar 30 15:12:26 2007
46.95% done, estimate finish Fri Mar 30 15:12:26 2007
70.43% done, estimate finish Fri Mar 30 15:12:26 2007
93.89% done, estimate finish Fri Mar 30 15:12:27 2007
Total extents actually written (inc HFS) = 21160
(Size of ISO volume = 20213, HFS extra = 947)
Total translation table size: 4617
Total rockridge attributes bytes: 3647
Total directory bytes: 16384
Path table size(bytes): 116
Max brk space used 0
21310 extents written (41 MB)
Something still seems to be wrong/missing with the mkisofs options.
Maybe is has to do with the "no Apple/Unix files will be
decoded/mapped" warning? Please help.
Thanks!
rob.
8:52 a.m.
On Fri, Mar 30, 2007 at 03:41:24PM +0200, Robert Allerstorfer wrote:
[root@fedora-ibook [__data__]]# mkisofs -volid "$volume_id"
-sysid "$system_id" -appid "$application_id" -volset
"$volume_set_id" \
> -untranslated-filenames -joliet -rational-rock -translation-table \
> -hfs -prep-boot ppc/chrp/yaboot -chrp-boot -part -hfs-volid
"$hfs_volume_id" -no-desktop -hfs-bless ./boot-new/ppc/mac \
> -o boot-new.iso ./boot-new
Add -map maps and create a maps file with:
# ext. xlate creator type comment
.hqx Ascii 'BnHx' 'TEXT' "BinHex file"
.txt Ascii 'ttxt' 'ttro' "README"
.deb Raw 'Debn' 'bina' "Debian package"
linux.bin Raw 'UNIX' 'boot' "bootstrap"
.bin Raw 'ddsk' 'DDim' "Floppy or ramdisk image"
.img Raw 'ddsk' 'DDim' "Floppy or ramdisk image"
.b Raw 'UNIX' 'tbxi' "bootstrap"
yaboot Raw 'UNIX' 'boot' "bootstrap"
.conf Raw 'UNIX' 'conf' "bootstrap"
.sit Raw 'SIT!' 'SIT!' "Proprietary Extortionist
Archive"
* Raw '????' '????' "UNIX"
--
lfr
0/0
10:38 a.m.
On Fri, 2007-03-30 at 15:41 +0200, Robert Allerstorfer wrote:
On Fri, 30 Mar 2007, 01:04 GMT+01 David Woodhouse wrote:
Something still seems to be wrong/missing with the mkisofs options.
Maybe is has to do with the "no Apple/Unix files will be
decoded/mapped" warning? Please help.
You'll need a map file - this is what we use in anaconda, use with -map.
This is what we use in fedora essentially:
mkisofs -o boot.iso -chrp-boot -U \
-prep-boot ppc/chrp/yaboot \
-part -hfs -T -r -l -J \
-A "Fedora 4" -sysid PPC -V "PBOOT" -volset 4 -volset-size 1 \
-volset-seqno 1 -hfs-volid 4 -hfs-bless $(pwd)/ppc/ppc \
-map mapping -magic magic -no-desktop -allow-multidot \
$(pwd)/ppc
Note the hfs-bless using a full path due to mkisofs wackiness.
Pauil
1:51 p.m.
On Fri, 30 Mar 2007, 16:38 GMT+01 Paul Nasrat wrote:
This is what we use in fedora essentially:
mkisofs -o boot.iso -chrp-boot -U \
-prep-boot ppc/chrp/yaboot \
-part -hfs -T -r -l -J \
-A "Fedora 4" -sysid PPC -V "PBOOT" -volset 4 -volset-size 1 \
-volset-seqno 1 -hfs-volid 4 -hfs-bless $(pwd)/ppc/ppc \
-map mapping -magic magic -no-desktop -allow-multidot \
$(pwd)/ppc
Note the hfs-bless using a full path due to mkisofs wackiness.
Thank you Paul, Luciano and David - works now :-)
OK, "for the archives", to get the image bootable, 'ofboot.b' must be
blessed as HFS in the CD's root directory, as type 'tbxi'
(all-lowercase - 'TBXI' won't work!).
Since there is no need to have any other file than 'ofboot.b' to be
associated with a certain type, I didn't use the full mapping table. I
think this is a more elegant way and it just WORKS. Here is the full
set of commands I have used:
test -d boot || mkdir boot
mount -o loop boot.iso boot
rm -rf boot-new; cp -rp boot boot-new
find boot-new -name TRANS.TBL -exec rm -f {} \;
echo "ofboot.b X 'chrp' 'tbxi'" > mapping
volume_id="PBOOT"; system_id="PPC"; volume_set_id="6";
application_id="Fedora Core 6"; hfs_volume_id=$volume_set_id
mkisofs -volid "$volume_id" -sysid "$system_id" -appid
"$application_id" -volset "$volume_set_id" \
-untranslated-filenames -joliet -rational-rock -translation-table \
-hfs -part -hfs-volid "$hfs_volume_id" -no-desktop -hfs-creator
'????' -hfs-type '????' -map "$(pwd)/mapping" \
-chrp-boot -prep-boot ppc/chrp/yaboot -hfs-bless
"$(pwd)/boot-new/ppc/mac" \
-o boot-new.iso $(pwd)/boot-new
The output of mkisofs should then be something like:
Warning: creating filesystem that does not conform to ISO-9660.
Blessing mac (/full_path_to/boot-new/ppc/mac)
CHRP boot partition 1
PReP boot partition 2 is "ppc/chrp/yaboot"
23.53% done, estimate finish Fri Mar 30 19:06:52 2007
46.95% done, estimate finish Fri Mar 30 19:06:52 2007
70.43% done, estimate finish Fri Mar 30 19:06:50 2007
93.89% done, estimate finish Fri Mar 30 19:06:51 2007
Total extents actually written (inc HFS) = 21160
(Size of ISO volume = 20213, HFS extra = 947)
Total translation table size: 4617
Total rockridge attributes bytes: 3647
Total directory bytes: 16384
Path table size(bytes): 116
Max brk space used 0
21310 extents written (41 MB)
Best regards,
rob.
3:57 p.m.
Anyone tested the ppc boot.iso in RAW hide for Fedora Core 7. I've been
netbooting to install as of recent. But I do rember it not being able to
boot properly on my pseries workstation when I burned it to a CD. I
think that the -map option may have been missing.
On Fri, 2007-03-30 at 20:51 +0200, Robert Allerstorfer wrote:
fedora essentially:
> mkisofs -o boot.iso -chrp-boot -U \
> -prep-boot ppc/chrp/yaboot \
> -part -hfs -T -r -l -J \
> -A "Fedora 4" -sysid PPC -V "PBOOT" -volset 4 -volset-size 1 \
> -volset-seqno 1 -hfs-volid 4 -hfs-bless $(pwd)/ppc/ppc \
> -map mapping -magic magic -no-desktop -allow-multidot \
> $(pwd)/ppc
> Note the hfs-bless using a full path due to mkisofs wackiness.
Thank you Paul, Luciano and David - works now :-)
OK, "for the archives", to get the image bootable, 'ofboot.b' must be
blessed as HFS in the CD's root directory, as type 'tbxi'
(all-lowercase - 'TBXI' won't work!).
Since there is no need to have any other file than 'ofboot.b' to be
associated with a certain type, I didn't use the full mapping table. I
think this is a more elegant way and it just WORKS. Here is the full
set of commands I have used:
test -d boot || mkdir boot
mount -o loop boot.iso boot
r
4:18 p.m.
On Fri, 2007-03-30 at 15:57 -0500, Jerone Young wrote:
Anyone tested the ppc boot.iso in RAW hide for Fedora Core 7.
I've been
netbooting to install as of recent. But I do rember it not being able to
boot properly on my pseries workstation when I burned it to a CD. I
think that the -map option may have been missing.
pSeries doesn't work that way -- it looks at /ppc/bootinfo.txt on the
CD. I thought I'd tested it recently, but will do so again.
--
dwmw2
4:45 p.m.
On Fri, 30 Mar 2007, 22:18 GMT+01 David Woodhouse wrote:
On Fri, 2007-03-30 at 15:57 -0500, Jerone Young wrote:
> Anyone tested the ppc boot.iso in RAW hide for Fedora Core 7. I've been
> netbooting to install as of recent. But I do rember it not being able to
> boot properly on my pseries workstation when I burned it to a CD. I
> think that the -map option may have been missing.
pSeries doesn't work that way -- it looks at /ppc/bootinfo.txt on
the
CD. I thought I'd tested it recently, but will do so again.
I saw that in the DVD image for Fedora Core 6 ppc, there is a
"iSeries" directory within /ppc which does not exist anymore in the
Prime DVD image for Fedora 6.92 ppc. Maybe that's the reason?
Another thing what I saw in the Fedora 6.92 image is that the volume
ID is not set properly, because is has double quotes on the beginning
and end of its string - '"Fedora 6.92 ppc DVD"' instead of 'Fedora
6.92 ppc DVD'.
rob.
5 p.m.
On Fri, 2007-03-30 at 23:45 +0200, Robert Allerstorfer wrote:
I saw that in the DVD image for Fedora Core 6 ppc, there is a
"iSeries" directory within /ppc which does not exist anymore in the
Prime DVD image for Fedora 6.92 ppc. Maybe that's the reason?
You said pSeries, didn't you? So no.
Another thing what I saw in the Fedora 6.92 image is that the volume
ID is not set properly, because is has double quotes on the beginning
and end of its string - '"Fedora 6.92 ppc DVD"' instead of 'Fedora
6.92 ppc DVD'.
Probably worth filing a bug against pungi for that.
--
dwmw2
9:53 a.m.
Ok happened to try this today and things work fine. My JS20 blade got to
yaboot & booted the kernel on the boot.iso image I burned to CD.
All is well.
On Fri, 2007-03-30 at 15:57 -0500, Jerone Young wrote:
Anyone tested the ppc boot.iso in RAW hide for Fedora Core 7.
I've been
netbooting to install as of recent. But I do rember it not being able to
boot properly on my pseries workstation when I burned it to a CD. I
think that the -map option may have been missing.
On Fri, 2007-03-30 at 20:51 +0200, Robert Allerstorfer wrote:
> fedora essentially:
> > mkisofs -o boot.iso -chrp-boot -U \
> > -prep-boot ppc/chrp/yaboot \
> > -part -hfs -T -r -l -J \
> > -A "Fedora 4" -sysid PPC -V "PBOOT" -volset 4 -volset-size
1 \
> > -volset-seqno 1 -hfs-volid 4 -hfs-bless $(pwd)/ppc/ppc \
> > -map mapping -magic magic -no-desktop -allow-multidot \
> > $(pwd)/ppc
>
> > Note the hfs-bless using a full path due to mkisofs wackiness.
>
> Thank you Paul, Luciano and David - works now :-)
>
> OK, "for the archives", to get the image bootable, 'ofboot.b' must
be
> blessed as HFS in the CD's root directory, as type 'tbxi'
> (all-lowercase - 'TBXI' won't work!).
>
> Since there is no need to have any other file than 'ofboot.b' to be
> associated with a certain type, I didn't use the full mapping table. I
> think this is a more elegant way and it just WORKS. Here is the full
> set of commands I have used:
>
> test -d boot || mkdir boot
> mount -o loop boot.iso boot
> r
_______________________________________________
Fedora-ppc mailing list
Fedora-ppc(a)lists.infradead.org
http://lists.infradead.org/mailman/listinfo/fedora-ppc
6230
days inactive
6237
days old
12 comments
6 participants
participants (6)
-
David Woodhouse -
Jerone Young -
Jesse Keating -
Luciano Miguel Ferreira Rocha -
Paul Nasrat -
Robert Allerstorfer