2:13 a.m.
On Fri, 2004-11-26 at 07:00 +0000, Michael A. Peters wrote:
Please follow-up to fedora-ppc(a)lists.infradead.org
Not using dhcp - using a static IP on my lan.
Network init script says it was starting, but eth0 was never brought
up.
Later, when the computer starts, if ifup eth0 doesn't work, can you
bring the interface up manually using ifconfig ?
It's possible that the network (ifcfg-eth0) setting set up by YDL
were
not sufficient for FC - I tried manually adjusting ifcfg-eth0 to look
similar to the ifcfg-eth0 on an x86 FC3 box, but that didn't work -
even when I tried modprobing various modules I thought might be
Why did you install YDL to bootstrap fedora? Fedora itself installs fine
responsible. I also tried running the network config tool - it
didn't
recognize eth0. I suspect it may be fixed by a newer kernel, but there
were deps not installed when I tried to install it - I really need to
get one of those USB keychain thingies, but I don't have one.
What kernel is this?
I tried modprobing mace, sungem, a few others that looked reasonable
(I
believe mace is the correct one) - but the installed kernel is kind of
sungem is the correct one. What iMac exactly do you have? We would
appreciate lspci output
old (from C3T2). I want to try with a newer kernel before I file any
bug reports. I also want to pick up a USB key before I file a bug
report, to make it easier to try different kernels.
Ok
While I highly doubt this has anything to do with it, this is a first
gen iMac but it has a Newer 433 G4 cpu daughtercard installed (opposed
to the 233 G3 it came with) - It's the second rev of the mobo (the one
used for Rev B/C/D iMacs)
Hmm, post lscpi in your next post (only to fedora-ppc list). What
does /proc/cpuinfo report ? (this is just for my curiosity)
--
Colin Charles, byte(a)aeon.com.my
http://www.bytebot.net/
"First they ignore you, then they laugh at you, then they fight you,
then you win." -- Mohandas Gandhi
3:23 a.m.
New subject: FC3 PPC development tree / installing FC3 on B&W PowerMacG3
On 11/26/2004 12:13:45 AM, Colin Charles wrote:
On Fri, 2004-11-26 at 07:00 +0000, Michael A. Peters wrote:
Please follow-up to fedora-ppc(a)lists.infradead.org
> Not using dhcp - using a static IP on my lan.
> Network init script says it was starting, but eth0 was never
brought
> up.
Later, when the computer starts, if ifup eth0 doesn't work, can you
bring the interface up manually using ifconfig ?
I tried (from within /etc/sysconfig/network-scripts) ./ifup eth0 and
that did not work.
> It's possible that the network (ifcfg-eth0) setting set up by YDL
were
> not sufficient for FC - I tried manually adjusting ifcfg-eth0 to
look
> similar to the ifcfg-eth0 on an x86 FC3 box, but that didn't work -
> even when I tried modprobing various modules I thought might be
Why did you install YDL to bootstrap fedora? Fedora itself installs
fine
No, it didn't. Not with the boot.iso for fc2 or fc3t2
The boot.iso would get stuck asking what network driver it should use,
it would never get beyond that. I've seen at least one other iMac
report that issue in the ppc archives.
What kernel is this?
It's the kernel that was in FC3T2
I'll have to set the iMac up again to get you more info - such as lspci
output.
> I tried modprobing mace, sungem, a few others that looked
reasonable
(I
> believe mace is the correct one) - but the installed kernel is kind
of
sungem is the correct one. What iMac exactly do you have? We would
appreciate lspci output
It's a tray loading iMac, Bondi Blue with Rev B. motherboard
Hmm, post lscpi in your next post (only to fedora-ppc list). What
does /proc/cpuinfo report ? (this is just for my curiosity)
This I actually have - though it was taken from YDL 3.0
cpu : 7400, altivec supported
temperature : 58-60 C (uncalibrated)
clock : 433MHz
revision : 2.9 (pvr 000c 0209)
bogomips : 865.07
machine : iMac,1
motherboard : iMac MacRISC Power Macintosh
detected as : 65 (iMac (first generation))
pmac flags : 00000000
memory : 192MB
pmac-generation : NewWorld
I'll set the iMac back up this weekend and get the lspci etc.
4:54 a.m.
New subject: FC3 PPC development tree / installing FC3 on B&W PowerMacG3
On Fri, 2004-11-26 at 09:23 +0000, Michael A. Peters wrote:
> Later, when the computer starts, if ifup eth0 doesn't work,
can you
> bring the interface up manually using ifconfig ?
I tried (from within /etc/sysconfig/network-scripts) ./ifup eth0 and
that did not work.
Provide tcpdump output
tcpdump -i eth0
> > It's possible that the network (ifcfg-eth0) setting set
up by YDL
> were
> > not sufficient for FC - I tried manually adjusting ifcfg-eth0 to
> look
> > similar to the ifcfg-eth0 on an x86 FC3 box, but that didn't work -
>
> > even when I tried modprobing various modules I thought might be
>
> Why did you install YDL to bootstrap fedora? Fedora itself installs
> fine
No, it didn't. Not with the boot.iso for fc2 or fc3t2
The boot.iso would get stuck asking what network driver it should use,
it would never get beyond that. I've seen at least one other iMac
report that issue in the ppc archives.
Hmm, odd. I too have an iMac, and possibly Paul has tried it too
> What kernel is this?
It's the kernel that was in FC3T2
I'll have to set the iMac up again to get you more info - such as lspci
output.
Tree at duke?
> > I tried modprobing mace, sungem, a few others that looked
> reasonable
> (I
> > believe mace is the correct one) - but the installed kernel is kind
> of
>
> sungem is the correct one. What iMac exactly do you have? We would
> appreciate lspci output
It's a tray loading iMac, Bondi Blue with Rev B. motherboard
Should be sungem
I'll set the iMac back up this weekend and get the lspci etc.
Good, without useful debugging information, we can't help you either
--
Colin Charles, byte(a)aeon.com.my
http://www.bytebot.net/
"First they ignore you, then they laugh at you, then they fight you,
then you win." -- Mohandas Gandhi
7089
days inactive
7089
days old
2 comments
2 participants
participants (2)
-
Colin Charles -
Michael A. Peters