Xorg config for 1st gen iMac

[Michael A. Peters]

I need the proper XF86Config info for a first gen iMac.

I used the tool Dan Burcaw wrote, but it did not create correct config  
file.


Section "Monitor"
        Identifier      "Monitor0"
        UseModes        "Modes0"
        ModelName       "Monitor Model"
        Option          "DPMS"
        HorizSync       60-60
        VertRefresh     75-60
EndSection

The HorizSync and VertRefresh are clearly not correct - well, HorizSync  
might be but startx complains at VertRefresh.

I'm tempted to just invert the 75-60 but I'd rather get a confirmed  
value.

This is a first gen iMac running FC2 yum updated from YDL 3 - but the  
YDL install was an extremely lite install (no X) for the purpose of  
making such update/install easier. So I don't have an existing XF86  
config file for it.

Thanks in advance,

Michael

-- 
Cheap Linux CD's
http://mpeters.us/linux/

[Colin Charles]

On Fri, 2004-11-19 at 16:16 +0000, Michael A. Peters wrote:
>  I need the proper XF86Config info for a first gen iMac. 
Not sitting near my iMac, but this is definitely worth a try

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name
of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "iMac"
	DisplaySize  270	200
	HorizSync    60.0 - 60.0
	VertRefresh  75.0 - 117.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "fbdev"
	VendorName  "Videocard vendor"
	BoardName   "Framebuffer driver (generic)"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     16
	SubSection "Display"
		Viewport   0 0
		Depth     8
		Modes    "1024x768"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "1024x768"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection


-- 
Colin Charles, byte(a)aeon.com.my
http://www.bytebot.net/
"First they ignore you, then they laugh at you, then they fight you, 
then you win." -- Mohandas Gandhi